Vermeer HG6000TX Tier 4i

Size: px
Start display at page:

Download "Vermeer HG6000TX Tier 4i"

Transcription

1 Maximize your grinder power. The HG6000TX self-propelled track grinder is highly maneuverable and able to work at uneven job sites and land-clearing projects. For increased efficiency, the HG6000TX can also drive between material piles. It features the innovative duplex drum, remote-controlled operation, an exclusive feed system and many other productivity-enhancing features. Specifications General Dimensions and Lengths - Long Infeed Maximum Length - Transport: 37.3 ' (11.4 m) Maximum Length - Transport with Dolly: 45.8 ' (14 m) Maximum Length - Conveyor Unfolded: 54.5 ' (16.6 m) Maximum Width (Transport): 9.2 ' (2.8 m) Maximum Width Transport - with Dolly: 9.8 ' (3 m) Maximum Width (Transport) - Option Two: 8.2 ' (2.5 m) Maximum Height (Transport): 148 " (375.9 cm) Maximum Height Transport with Dolly: 155 " (393.7 cm) Weight - Engine Option One: lbs ( kg) Weight Engine Option 1 with Dolly: lbs ( kg) Tongue Weight - Engine Option 1 with Dolly: lbs ( kg) Axle Weight - Engine Option 1 with Dolly: lbs ( kg) Dolly Weight: 9500 lbs ( kg) Sound Power: Sound Power - Engine Option Two: Engine Option One Make and Model: CAT C18 tier 4i/ Stage IIIB Number of Cylinders: 6 Gross Horsepower (Maximum): 755 hp (563 kw) Torque (Max): 2582 ft-lb ( Nm) Fuel Tank Capacity: 350 gal ( L) Max Fuel Consumption: 39.1 gph (148 lph) Fuel Type: Ultra-low sulfur diesel (<15 ppm) Air Cleaner: Dry-type with primary and secondary elements and restriction indicator Oil Filter: Full-flow, spin-on Recommended Oil: API CJ-4, 15W-40 Oil Volume with Filter: 36 qt (34.1 L) Maximum Angle of Continuous Operation: 30 deg Cooling Medium: Liquid Coolant Capacity (Engine and Radiator): 22.6 gal (85.6 L) Air to Boil Temperature: 118 deg Alternator: 24 volt Fan: (Qty 2) Hydraulically driven, reverssible

2 Clutch Type: Hydraulic operated wet clutch with PTO Clutch Engagement: Push button Drive Belt Type: Synchronous, carbon fiber Infeed Conveyor Feed Table Width: 60 " (152.4 cm) Feed Table Length - Option One: 20 ' (6.1 m) Feed Table Length - Option Two: 8.1 ' (2.5 m) Loading Height: 8.1 ' (2.5 m) Flare Construction: Integrated with infeed Feed Conveyor Type: Welded slat chain Material Construction: steel Drive Type: Radial piston motor Drive Roller Construction: Welded steel Front Idler Roller Construction: Self-cleaning steel auger Infeed Floor Construction: Welded steel with replaceable UHMW wear plates Infeed Roller Infeed Roller Width: 56.4 " (143.2 cm) Maximum Feed Height: 47.2 " (119.9 cm) Infeed Roller Weight: 1300 lbs (589.7 kg) Infeed Roller Diameter: 36.1 " (91.8 cm) Material Type: Fabricated steel Tooth Design: Serrated Number of Teeth: 13 bars Drive Motor: Fixed displacement, geroler Drive Planetary: Two options (HD :1) (STD :1) Feed Roller Down Pressure: Adjustable Safety System Thrown Object Deflector: Standard Deflector Position: Variable Duplex Drum Millbox Opening: 60" W x 32" H (152.4 cm W x 81.3 cm H) Drum Diameter: 28 " (71.1 cm) Tip Diameter: 36.4 " (92.5 cm) Drum Cutting Width: 62.4 " (158.5 cm) Drum Skin Thickness: 1.5 " (3.8 cm) Drum Speed: 1086 rpm Bearing Type: Double row, sperical roller Bearing - Inner Race Diameter: 5.5 " (14 cm) Number of Hammers: 10 Number of Cutters: 20 Cutter Block Types: 2-bolt (wide-block, wing A/R, bear claw) Center Retention Pin Dimensions: 2" diameter x 75.3" L (5.1 cm diameter x cm L) Screens Screen Weight: 470 lbs (213.2 kg)

3 Screen Dimensions: 3/4" (1.9 cm) thick Screen Type: Fabricated out of abrasion resistant steel Number of Screens: 2 Number of Sides: 1 Screen Area: 3317 sq in (21400 sq cm) Millbox Lid Liner Dimensions: Abrasian resistant steel Liner Dimensions: 1" thick x 5.6" W x 65.4" L (2.5 cm thick x 14.2 cm W x cm L) Anvil Type: Fabricated steel with replaceable wear surfaces Anvil Dimensions: 22.8" x 4.1" x 80.8" (57.9 cm x 10.4 cm cm) Discharge System - Single Belt Design Length: 81.3 ' (24.8 m) Width: 48 " (121.9 cm) Belt Design: 3-ply - 330# or straight warp single ply 330# both with V cleat Splice: R2-stainless steel or Super splice Return Roller Quantity: 4 Idler Roller Diameter: 12 " (30.5 cm) Idler Roller Bearing: 1-15/16, 4-bolt flange Standard Drive Roller Diameter: 12.8 " (32.5 cm) Magnetic Drive Roller Diameter: 12.8 " (32.5 cm) Drive Motor: Fixed displacement, geroler Drive Motor Bearings: 1-15/16, 4-bolt flange Belt Speed: 780 ft/min (237.7 m/min) Load Height: 14 ' (4.3 m) Hydraulic System Tank capacity: 100 gal (378.5 L) Recommended Oil: Vermeer HyPower 68 Filtration Method: Dual in-tank return filters with suction strainer Number of Coolers: 2 (Implement/Track) Implement Hydraulics System Type: Open loop, pressure and flow compensated Pump Type: Variable displacement axial piston Pump Flow at Maximum RPM: 32.4 gpm (122.6 L/min) System relief pressure: 4500 psi (310.3 bar) Discharge Conveyor Hydraulics System Type: Open loop Pump Type: Fixed dsplacement, gear pump Pump Flow at Maximum RPM: 25.7 gpm (97.3 L/min) System relief pressure: 3000 psi (206.8 bar) Motor Series: Char-Lyn 6000 Series, geroler Fan Drive Hydraulics System Type: Open loop, pressure and flow compensated Pump Type: Variable displacement, axial piston Pump Flow at Maximum RPM: 36.2 gpm (137 L/min) System relief pressure: 3500 psi (241.3 bar)

4 Motor Series: Radiator-Permco M197 Series; CAC-Turolla OCG SNM2 Series Fan Series - FWD/REV: Reversible Clutch Tank capacity: 18 gal (68.1 L) Recommended Oil: VMF Gold Filtration Method: Spin-on, pressure filter, B6=1000 Number of Coolers: 1 System Type: Open-loop Pump Type: Fixed displacement, gear pump Pump Flow at Maximum RPM: 12.4 gpm (46.9 L/min) System relief pressure: 260 psi (17.9 bar) Electrical System System Voltage: 24 Volt starting Battery: Group 8-D 1155 CCA (Qty 2) System Protection: Fused Control Station Display Type: LCD Engine Information: Yes Machine Information: Yes Operational Faults: Yes Gauges: Two, fuel level and hydraulic pressure Switches: Moisture proof, toggle style Radio Remote Control Display Type: LCD Engine Information: Yes Machine Information: Yes Operational Faults: Yes Switches: Sealed membrane Operating Range: 300 ft Battery Type: (qty 6) AA Channel Setting: 50 channels Chassis Frame Description: Unit body contruction Tongue Description: Bolt on to infeed structure Hitch Type: Fifth wheel Fender Description: Optional bolt-on formed steel Brake Type: Air actuated with spring applied park break Trailer Light Type: V LED Axle/Suspension Suspension Type: Air-ride Manufacturer - Option One: Hendrickson Capacity per Axle: lbs ( kg) Number of Axles: 3 Tires - Option One: 255/70R22.5

5 Wheels - Option One: 22.5" x 8.3" (57.2 cm x 21 cm ) Hub piloted steel Ground Clearance - Option One: 5.3 " (13.5 cm) Tracks Track Frame Description: Rigid frame with reinforced box section Track Type: D5 double grouser Type of Idler: D5 excavator rollers Number of Idlers: 20 Track Drive Pump Type: SauerDanfoss Series H1 Pump Flow at Maximum RPM: 43 GPM System Relief Pressure: 5000psi Track Drive Motor Type: SauerDanfoss Series 51 Track Brake Type: Multidisk parking brake (spring activated) High Speed Travel: 2.6 mph (4.2 km/h) Low Speed Travel: 1 mph (1.6 km/h) Track Length on Ground: 142" (360.7 cm) Track Width - Option One: 26" (66 cm) Track Width Option One - Ground Bearing Pressure - Soft Ground: 10.2 psi (70.3 kpa) Track Width Option One - Ground Bearing Pressure - Hard Ground: 55.6 psi (383.3 kpa) Track Width - Option Two: 20" (50.8) Track Width Option Two - Ground Bearing Pressure - Option : 13.2 psi (91 kpa) Track Width Option Two - Ground Bearing Pressure - Option Two: 72.2 psi (497.8 kpa) Optional Air Compressor Air Compressor Brand: Mi-T-M Engine: Honda, 11.7 hp Maximum Pressure: 175 psi (12.1 bar) Maximum Air Flow: 29 cfm (.8 cmm) Tank capacity: 30 gal (113.6 L) Other Options Screens: Yes Special Tools Group: Yes Extended Warranty: Yes Preventative Maintenance: Optional Special Paint: Yes Features & Benefits Feature: Single-Piece Discharge Conveyor Belt Description: The HG6000TX features a single-piece belly and discharge conveyor belt. Benefit: By eliminating the transition from belly to load-out (which may result in plugging or bottlenecking in some conditions) the HG6000TX provides more throughput and less clean-up under the machine. Feature: Series II Duplex Drum Hammermill Description: Drum consists of 10 hammers and 20 cutter tips with a 36.4" (92.5 cm) cutter tip diameter and 62.4 (158.5 cm) cutting width.

6 Benefit: This patented design decreases daily maintenance time while increasing the life of major wear components by being able to reverse the cutter tips, hammers and center section of drum. Inertia is increased as compared to "pin and plate style" rotors and balance retention is improved to add life to your machine. Maintenance time is decreased by the ability to remove and replace single hammers along with the ability to externally balance the drum. Feature: Hydraulic Tank Service Shutoff Valves Description: Hydraulic tank is supplied with shutoff values on all supply and return lines. Benefit: Allow for easier servicing of hydraulic components without drain complete tank. Feature: Box Beam-Style Anvil Description: The HG6000TX features a box beam-style anvil. Benefit: The box beam-style anvil, with replaceable wear surfaces on top, uses a wedge system to maximize retention while providing improved resistance to bending. Additionally, serviceability is increased by providing ground level access. Feature: Infeed Drive Motor and Pulley Placement Description: The low speed, high torque radial piston infeed drive motor is now located further away from the impact zone, helping extend its useful life. Benefit: By moving the drive motor 11 (27.9 cm) away from the mill there is less impact loading on the infeed chain and drive pulley. This increased distance also reduces the amount of material lost due to the gap between the chain and anvil. Feature: Easy Access Screens Description: The screens on the HG6000TX load and unload from the top down and a variety of screens are available to meet your customer's needs. Benefit: Top loading screens allow the operator to change screens easily and in less time than the competition. One lift point is included for vertical lifting. Feature: Dual-Screen System Description: Two different screens may be used in the system. Benefit: By allowing for a dual-screen system, screens can be mixed and matched for the desired product. Screens are also reversible and interchangeable to get the maximum usage of the wear portion of the screen. This redesign provides an additional 20 percent screen area over the previous model. Feature: C248 Microprocessor Controller with the DP10 Display and Radio Remote Description: Multi function radio remote allows operator to run most functions away from machine. LCD readout provides engine data and fault logging, as well as ability to adjust a number of infeed and engine parameters according to material type. Benefit: Multi function radio remote allows operator to run most functions away from machine. LCD readout provides engine data and fault logging, as well as ability to adjust a number of infeed and engine parameters according to material type.

7 Feature: Adjustable Screen Supports Description: The HG6000TX has the ability to adjust the screen supports. Benefit: The adjustable screen supports allow the screen to be moved closer or farther away from hammer tips to match clearance with material types. Feature: Enhanced Mill Box Wear Surfaces Description: Replaceable mill box wear surfaces are thicker. Benefit: Increased thickness of mill box sidewalls in front of the mill as well as allowing the plates between the end of the mill and side wall to be easily replaced by removing hardware and installing new. Optional, abrasion resistant wear plates are available. Feature: Thrown Object Deflector (TOD) Description: A patent pending, hydraulically controlled, cover over the hammermill area deflects material which might be thrown towards the open end of the feed table. This feature is hinged and can be raised or lowered depending upon grinding applications by simply touching a button on the radio remote control. Benefit: Decreases the quantity and distance of thrown objects. Allows machine to be operated in a smaller safe working zone. Feature: Tow Hooks Standard Description: Machines are equipped with 2 hooks located on the track crossmembers. Benefit: This feature aids in moving machine in difficult site conditions. Hooks are located in an area that distributes the load throughout the mainframe. Feature: Track Undercarriage Description: Rigid mounted reinforced boxed track frame. Same system used on T755 trenchers equipped with 20" or 26" (50.8 cm or 66 cm) double grouser track pads using sealed track rollers and compressed coil spring. Benefit: This fully mobile unit allows the operator to efficiently and effectively to move the machine around jobsites whether it be landclearing, compost sites or forest thinning jobs, without the need for additional support equipment. Tracks provide increased traction in unstable ground condition providing access to remote areas or transport across obstacles such as creeks, ditches, soft sandy or wet soil conditions and inclines. Wide track grousers provide as low as 10.2 psi of ground pressure on soft surfaces. Idlers are sealed for life so they are maintenance free and sealed from contamination. Feature: Engine options include a Cat 755-hp (563 kw) Tier 4i (Stage IIIB) engine or a Cat 630 hp (469.8 kw) Tier 3 engine. Description: The HG6000TX features two engine options depending on governmental regulations and fuel availability. Benefit: The Cat 755-hp (563 kw) Tier 4i engine meets all U.S., Canada and European Union tier regulations, and has a 20% increase in horsepower over the Tier 3 engine. The 630 hp (469.8 kw) Tier 3 engine is available for lesser regulated countries not offering ultra-low sulfur diesel fuel. Feature: Dolly Transport System Hydraulically Activated Attachment Pins

8 Description: Four hydraulically activated pins attach the dolly to the grinder frame Benefit: Reduces time needed to move machine between jobsites by eliminating loading onto a highway trailer and tying down. As the pins are locked in the transport position, LED lights illuminate on the control panel. Feature: Dolly Transport System Air Ride Suspension Description: Air ride suspension levels the load between the axles and raises the grinder off the ground when in transport mode. Benefit: Provides even weight distribution among axles and gives the machine 7 (17.8 cm) of ground clearance in transport mode to help traverse uneven ground. Feature: Dolly Transport System ABS Braking System With Remote Parking Brake Release Valve Description: The DT6 is equipped with an ABS braking system with a remote parking brake release system. Benefit: The ABS prevents the wheels from locking up whether the DT6 is loaded or unloaded. The remote parking brake release valve allows the dolly to be unloaded with an alternate vehicle on a jobsite. Feature: Dolly Transport System Pintle Hitch Kit Description: The removable tow bar pintle hitch kit allows the dolly to be towed by an alternate vehicle. Benefit: If the DT6 and HG6000TX are a great distance from each other, the DT6 can be towed with the appropriate vehicle to the grinder, reducing time spent backtracking on the jobsite. Feature: Dolly Transport System Screen Carrier Rack Description: Additional space and tie downs for one set of extra screens. Benefit: Additional space and tie downs for one set of extra screens. Feature: Dolly Transport System Standard Dual Wheels Or Optional Super Single Wheels Description: Customers have the option of either dual wheels or super single wheels. Benefit: The optional super single wheels provide increased floatation on various jobsite conditions. Feature: Dolly Transport System Dual Stabilizers Description: Dual stabilizers attach to grinder infeed frame. Benefit: The dual stabilizers on the HG6000TX are used to lift the machine to match the 5th wheel plate on the truck. They are independently adjustable for working on uneven ground. Feature: Dolly Transport System Fifth-Wheel Placement Description: The fifth wheel has been placed under the infeed system. Benefit: By moving the fifth wheel under the infeed, the HG6000TX with DT6 has reduced turning radius and improved site maneuverability over a conventional lowboy trailer. Last Updated: 05/25/2012 Contains information from Vermeer Corporation operated web site. Its use is subject to terms and conditions of Vermeer Corporation operated web site agreement at Vermeer Corporation reserves the right to make changes in engineering, design and specifications; add improvements; or discontinue manufacture at any time without notice or obligation. 2009

9 Vermeer Corporation. All Rights Reserved. Vermeer HG6000TX Tier 4i 06/01/2012

HORIZONTAL GRINDERS HORIZONTAL GRINDERS HG6000/HG6000TX/HG6000E

HORIZONTAL GRINDERS HORIZONTAL GRINDERS HG6000/HG6000TX/HG6000E HORIZONTAL GRINDERS HORIZONTAL GRINDERS HG6000/HG6000TX/HG6000E Time for the triple threat in grinding. Whether you re working in large-scale land clearing, wood processing or greenwaste recycling, each

More information

H G H O R I Z O N T A L G R I N D E R H G H O R I Z O N T A L G R I N D E R

H G H O R I Z O N T A L G R I N D E R H G H O R I Z O N T A L G R I N D E R H G 6 0 0 0 H O R I Z O N T A L G R I N D E R H G 6 0 0 0 H O R I Z O N T A L G R I N D E R Inspired by customers, built by an industry leader. You spoke and we listened. At Vermeer we are always looking

More information

Grinding Its Way To The Top

Grinding Its Way To The Top Horizontal Grinders Reduce, Recycle. The HG6000 and HG6000TX horizontal grinders from Vermeer offer productivity and efficiency for your organic and wood waste recycling needs. Building on over a decade

More information

General Dimensions and Weights. 150" 381 cm. 198" cm. 480 lbs kg. 560 lbs 254 kg. 49 and 85 hp (36.54 and kw) Engine Option One

General Dimensions and Weights. 150 381 cm. 198 cm. 480 lbs kg. 560 lbs 254 kg. 49 and 85 hp (36.54 and kw) Engine Option One Home > Equipment > Brush Chippers > BC1000XL BC1000XL Specs General Dimensions and Weights Length - Feed Table Up, Tongue In Length - Table Down, Tongue Extended 150" 381 cm 198" 502.9 cm Width 66.5" 168.9

More information

Horizontal Grinder HG 4000 TX

Horizontal Grinder HG 4000 TX Horizontal Grinder HG 4000 TX Steadfast strength in a maneuverable package Designed to offer access to remote areas and quick repositioning without the need for additional support equipment, Vermeer introduces

More information

Feed System. Oil Volume with Filter 14 qt 13.3 L. Maximum Angle of Continuous Operation. 30 deg. Liquid. Cooling Medium

Feed System. Oil Volume with Filter 14 qt 13.3 L. Maximum Angle of Continuous Operation. 30 deg. Liquid. Cooling Medium Brush Chippers > BC1500 BC1500 Specs General Dimensions and Weights Length - Feed Table Up, Tongue In Length - Table Down, Tongue Extended 179" 454.7 cm 217" 551.2 cm Width 86" 218.4 cm Height 104" 264.2

More information

General Dimensions and Weights. 168" cm. 206" cm. 660 lbs kg. 660 lbs kg lbs kg

General Dimensions and Weights. 168 cm. 206 cm. 660 lbs kg. 660 lbs kg lbs kg Home > Equipment > Brush Chippers > BC1200XL BC1200XL Specs General Dimensions and Weights Length - Feed Table Up, Tongue In Length - Table Down, Tongue Extended 168" 426.7 cm 206" 523.2 cm Width 79" 200.7

More information

R E L I A B L E S U P P O R T, A L L O V E R T H E W O R L D.

R E L I A B L E S U P P O R T, A L L O V E R T H E W O R L D. Compost Turner Line From windrow to windfall the growing composting market Composting continues to grow as an economically viable and socially responsible segment of the global recycling market. Given

More information

At every turn, you can count on Wildcat products.

At every turn, you can count on Wildcat products. Compost Turners At every turn, you can count on Wildcat products. Since our founding in 1973, Wildcat Mfg. Co., Incorporated, has been a recognized leader in the organic processing industry. Today, we

More information

BID SPECIFICATION SHREDDER/GRINDER TUB TYPE Vermeer TG800

BID SPECIFICATION SHREDDER/GRINDER TUB TYPE Vermeer TG800 BID SPECIFICATION SHREDDER/GRINDER TUB TYPE Vermeer TG800 GENERAL The intent of this specification is to describe a tub-type shredder/grinder which is fullyassembled, trailer mounted, diesel-powered which

More information

HORIZONTAL GRINDERS FORESTRY MULCHERS

HORIZONTAL GRINDERS FORESTRY MULCHERS HORIZONTAL GRINDERS FORESTRY MULCHERS (800) 392-2686 Wooster, OH HORIZONTAL GRINDERS FORESTRY MULCHERS HORIZONTAL GRINDER RH1754-160 : 4 RH1754-240 : 4 FORESTRY MULCHERS C100LGP : 6 C100R : 8 C260 : 10

More information

T1255 TERRAIN LEVELER

T1255 TERRAIN LEVELER T H E V E R M E E R D E A L E R N E T W O R K : R E L I A B L E S U P P O R T, A L L O V E R T H E W O R L D. Vermeer Asia Pacific Singapore 608586 Phone: +65 6516 9560 Fax: +65 6515 9218 Vermeer Corporation

More information

ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC kw (159 hp)

ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC kw (159 hp) ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC-5 119 kw (159 hp) ZX245LC-5 ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS Engine ZX245LC-5 Manufacturer and Model Isuzu 4HK1 Non-Road Emissions Standard EPA

More information

T1255 TERRAIN LEVELER SEM T1255 TERRAIN LEVELER

T1255 TERRAIN LEVELER SEM T1255 TERRAIN LEVELER T1255 TERRAIN LEVELER SEM T1255 TERRAIN LEVELER S U R F A C E E X C A V A T I O N M A C H I N E CUTTING EDGE 2 v e r m e e r. c o m TECHNOLOGY: Vermeer trenchers are the benchmark when it comes to cutting

More information

MP-2 Grinder & Colorizer

MP-2 Grinder & Colorizer MP-2 Grinder & Perfect In One Pass Colored Mulch Simplify your mulch production with a complete grind-and-color system. The Rotochopper Difference The MP-2 converts raw wood fiber into vibrant colorenhanced

More information

ZAXIS. 210/210LC-5 n 119 kw (159 hp)

ZAXIS. 210/210LC-5 n 119 kw (159 hp) n 119 kw (159 hp) EnginE Manufacturer and Model... Isuzu 4HK1 Non-Road Emission Standards... certified to IT4 / Stage IIIB emissions Net Rated Power (ISO 9249)... 119 kw (159 hp) @ 1,900 rpm Cylinders...

More information

TD-8R ENGINE COOLING OPERATOR STATION ELECTRICAL HYDRAULICS CRAWLER DOZERS. EPA Tier 3/EU Stage IIIA STANDARD, LGP TD-8R TD-8R.

TD-8R ENGINE COOLING OPERATOR STATION ELECTRICAL HYDRAULICS CRAWLER DOZERS. EPA Tier 3/EU Stage IIIA STANDARD, LGP TD-8R TD-8R. CRAWLER DOZERS EPA Tier 3/EU Stage IIIA STANDARD, LGP ENGINE Make and model Emissions standard Displacement Bore and stroke Gross horsepower, SAE J1995 Cummins QSB3.3 EPA Tier 3/EU Stage IIIA 3.3 l (199

More information

T1255III TERRAIN LEVELER

T1255III TERRAIN LEVELER T H E V E R M E E R D E A L E R N E T W O R K : R E L I A B L E S U P P O R T, A L L O V E R T H E W O R L D. Vermeer Asia Pacific Singapore 608586 Phone: +65 6516 9560 Fax: +65 6515 9218 Vermeer Corporation

More information

ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX180LC kw (121 hp)

ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX180LC kw (121 hp) ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX180LC-5 90 kw (121 hp) ZX180LC-5 ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS Engine ZX180LC-5 Manufacturer and Model Isuzu 4JJ1 Non-Road Emissions Standards Certified

More information

TUB GRINDERS

TUB GRINDERS www.haybuster.com TUB GRINDERS www.haybuster.com What does the Hay H-1000 TUB GRINDER The Haybuster PTO Tub Grinder line is made up of three sizes of grinders plus the option of an electric motor. The

More information

ZAXIS DASH-5 utility-class EXCAVAtORS. ZX250lC kw (188 hp)

ZAXIS DASH-5 utility-class EXCAVAtORS. ZX250lC kw (188 hp) ZAXIS DASH-5 utility-class EXCAVAtORS ZX250lC-5 140 kw (188 hp) ZX250lC-5 ZAXIS DASH-5 utility-class EXCAVAtORS Engine ZX250LC-5 Manufacturer and Model Isuzu 4HKIZXSA-01 Non-Road Emissions Standards EPA

More information

ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX210/210LC kw (150 hp)

ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX210/210LC kw (150 hp) ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX210/210LC-5 119 kw (150 hp) zx210/210lc-5 ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS Engine ZX210-5 / ZX210LC-5 Manufacturer and Model Isuzu 4HK1 Non-Road Emission Standards

More information

290G LC. 147 kw (197 hp)

290G LC. 147 kw (197 hp) 290G LC 147 kw (197 hp) 290G LC Engine 290G LC Base engine for use in U.S., U.S. Territories, and Canada Optional engine for use outside the U.S. and U.S. Territories Optional engine for use outside the

More information

250G LC. 142 kw (191 hp)

250G LC. 142 kw (191 hp) 250G LC 142 kw (191 hp) 250G LC Engine 250G LC Base engine for use in U.S., U.S. Territories, and Canada Optional engine for use outside the U.S. and U.S. Territories Optional engine for use outside the

More information

FORESTRY MULCHERS C100LGP C100R C200 C260 T260 T360. (800) Wooster, OH

FORESTRY MULCHERS C100LGP C100R C200 C260 T260 T360. (800) Wooster, OH FORESTRY MULCHERS C100LGP C100R C200 C260 T260 T360 (800) 392-2686 Wooster, OH Since 1978, starting with the creation of our original RG 145 stump cutter, Rayco has grown into one of the most recognizable

More information

7. 5 M E T R I C T O N EXCAVATOR C 7 5 C

7. 5 M E T R I C T O N EXCAVATOR C 7 5 C 7. 5 M E T R I C T O N C EXCAVATOR Specifications Engine Type................................... Isuzu CC-4JG1 naturally aspirated direct-injection diesel; certified to EPA Tier 2 emissions Net Peak Power

More information

PEDESTRIAN TRENCHERS PEDESTRIAN TRENCHERS FEATURING THE RT200 / RTX150 / RTX100 / RT60 / TLR30 / TOOLING

PEDESTRIAN TRENCHERS PEDESTRIAN TRENCHERS FEATURING THE RT200 / RTX150 / RTX100 / RT60 / TLR30 / TOOLING PEDESTRIAN TRENCHERS PEDESTRIAN TRENCHERS FEATURING THE RT200 / RTX150 / RTX100 / RT60 / TLR30 / TOOLING Proven solutions for your trenching needs. Trusted by rental outlet owners, electricians, contractors

More information

Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier 3, Tier 4) 6 8.3(506) 188(252) Direct Injection Turbocharged, air-to-air charge air cooler COOLING Fan Drive

Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier 3, Tier 4) 6 8.3(506) 188(252) Direct Injection Turbocharged, air-to-air charge air cooler COOLING Fan Drive 330 EXCAVATOR ENGINE Engine Make/ Engine Model Emission Rating (optional) Cylinders Displacement L (cu. In) Net Power kw (Hp) @2,200 rpm Fuel System Aspiration Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier

More information

Hydraulic. Open center, load sensing Main Pumps. 2 variable-displacement axial-piston pumps Maximum Rated Flow 105 L/m (28 gpm) x 2 Pilot Pump

Hydraulic. Open center, load sensing Main Pumps. 2 variable-displacement axial-piston pumps Maximum Rated Flow 105 L/m (28 gpm) x 2 Pilot Pump 14 Engine Base engine for use in the U.S., U.S. Territories, and Canada Optional engine for use outside the U.S. and U.S. Territories Manufacturer and Model John Deere PowerTech PWX John Deere 4045H Non-Road

More information

555C WHEEL LOADER. Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Net Horsepower 238 kw (319 hp) Operating Weight kg (63,753 lb)

555C WHEEL LOADER. Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Net Horsepower 238 kw (319 hp) Operating Weight kg (63,753 lb) 555C WHEEL LOADER Net Horsepower 238 kw (319 hp) Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Operating Weight 28918 kg (63,753 lb) World class loader meeting high production requirements

More information

RADIAL-LIFT TRACK LOADERS RT175 RT210

RADIAL-LIFT TRACK LOADERS RT175 RT210 RADIAL-LIFT TRACK LOADERS RT175 RT210 In 1859, an agricultural implement company, housed in a blacksmith shop, was started in West Bend, Wisconsin. From these humble beginnings, the Gehl brand has become

More information

TD-9S COOLING ENGINE OPERATOR STATION ELECTRICAL HYDRAULICS CRAWLER DOZERS. EPA Tier 4F/EU Stage IIIB STANDARD, LT, LGP TD-9S TD-9S.

TD-9S COOLING ENGINE OPERATOR STATION ELECTRICAL HYDRAULICS CRAWLER DOZERS. EPA Tier 4F/EU Stage IIIB STANDARD, LT, LGP TD-9S TD-9S. CRAWLER DOZERS EPA Tier 4F/EU Stage IIIB STANDARD, LT, LGP ENGINE Make and model Emissions standard Displacement Cummins QSF3.8 EPA Tier 4F/EU Stage IIIB 3.8 l (229 in3) COOLING Type Variable-speed fan

More information

FORESTRY. For Use in Log-Loading, Road Building and Harvester Processing Applications. Engine. Cab and Controls. Undercarriage

FORESTRY. For Use in Log-Loading, Road Building and Harvester Processing Applications. Engine. Cab and Controls. Undercarriage FORESTRY For Use in Log-Loading, Road Building and Harvester Processing Applications Engine Isuzu AI-4HK1X Tier 3 turbocharged diesel engine with electronic fuel control, 4-cylinder, water-cooled, EGR

More information

CX SERIES WALK-BEHIND TRENCHERS

CX SERIES WALK-BEHIND TRENCHERS CX SERIES WALK-BEHIND TRENCHERS WALK-BEHINDS 1 Utilizes the Ditch Witch 35K digging system or the new exclusive 19K Opticut System. 2 C24X features a low-maintenance, long lasting Honda engine. C16X and

More information

RBH65 BACKHOE LOADER

RBH65 BACKHOE LOADER RBH65 BACKHOE LOADER Shift productivity into a higher gear. 1 2 3 Whether you're digging, trenching, back-filling or handling material, we have a Rhino Backhoe Loader to meet your needs. Rhino Backhoe

More information

B-66 Horizontal Grinder

B-66 Horizontal Grinder B-66 Horizontal Grinder Precision Grinding Matched with Time-Saving Features Maximize the value of your resources with the industry s most advanced fiber processing system. The Rotochopper Difference Packed

More information

STUMP CUTTERS BRUSH CHIPPERS

STUMP CUTTERS BRUSH CHIPPERS STUMP CUTTERS BRUSH CHIPPERS (800) 392-2686 Wooster, OH STUMP CUTTERS BRUSH CHIPPERS MINI WORK-FORCE STUMP CUTTER RG13 Series II : 4 RG13 : 4 RG25HD : 4 SELF-PROPELLED STUMP CUTTER RG27 Super Jr : 6 RG35

More information

BC2100XL BRUSH CHIPPER B C X L B R U S H C H I P P E R

BC2100XL BRUSH CHIPPER B C X L B R U S H C H I P P E R BC2100XL BRUSH CHIPPER B C 2 1 0 0 X L B R U S H C H I P P E R Believe in a legend. With a 275 hp (205.1 kw) engine, this brush chipper delivers the power to tackle tough land-clearing jobs. Two patent-pending

More information

PEDESTRIAN TRENCHERS PEDESTRIAN TRENCHERS FEATURING THE RTX250 / RTX150 / RTX100 / RT60 / TLR30 / TOOLING

PEDESTRIAN TRENCHERS PEDESTRIAN TRENCHERS FEATURING THE RTX250 / RTX150 / RTX100 / RT60 / TLR30 / TOOLING PEDESTRIAN TRENCHERS PEDESTRIAN TRENCHERS FEATURING THE RTX250 / RTX150 / RTX100 / RT60 / TLR30 / TOOLING Proven solutions for your trenching needs. Trusted by rental outlet owners, electricians, contractors

More information

MORBARK, LLC 8507 S. Winn Rd., PO Box 1000 Winn, MI Fax:

MORBARK, LLC 8507 S. Winn Rd., PO Box 1000 Winn, MI Fax: Whether you re recycling shingles, paper, organic or wood waste, you are doing your part to reduce landfill waste, keep our neighborhoods clean, and input value into items that are considered wasteful.

More information

SB-85R Extra ENGINE ELECTRICAL OPERATOR STATION OPERATING WEIGHTS COOLING OPTIONAL COMPONENTS HYDRAULICS PIPELAYER. EPA Tier 4f/EU Stage IV STANDARD

SB-85R Extra ENGINE ELECTRICAL OPERATOR STATION OPERATING WEIGHTS COOLING OPTIONAL COMPONENTS HYDRAULICS PIPELAYER. EPA Tier 4f/EU Stage IV STANDARD PIPELAYER EPA Tier 4/EU Stage IV STANDARD ENGINE Make and model Cummins QSX 15 ELECTRICAL Voltage 24 V Emissions Standard EPA Tier 4f/EU Stage IV Number of batteries 4 Displacement 15 l (915 in3) Battery

More information

Unprecedented precision and ease of operation.

Unprecedented precision and ease of operation. REX130 EXCAVATOR Unprecedented precision and ease of operation. This Rhino excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A

More information

D7G. Track-Type Tractor

D7G. Track-Type Tractor D7G Track-Type Tractor Cat 3306 turbocharged engine Net power 149 kw 200 hp Operating weight With 7S blade 20 094 kg 44,300 lb With 7A blade 19 660 kg 43,300 lb Blade capacity 7S blade 4.2 m 3 5.5 yd 3

More information

TRACK LOADERS RADIAL LIFT 1750RT NXT2 2100RT NXT2 2500RT

TRACK LOADERS RADIAL LIFT 1750RT NXT2 2100RT NXT2 2500RT TRACK LOADERS RADIAL LIFT 1750RT NXT2 2100RT NXT2 2500RT IN THE BEGINNING What began in the 19th century as an agricultural implement manufacturer has grown into a 21st century compact equipment powerhouse

More information

FORESTRY MULCHERS. (800) Wooster, OH

FORESTRY MULCHERS. (800) Wooster, OH FORESTRY MULCHERS (800) 392-2686 Wooster, OH FORESTRY MULCHERS C100LGP: 4 C100R : 6 C160 : 8 C260 : 10 T260 : 12 T360 : 14 Rayco Manufacturing Inc. retains the right to make changes in design and specifications;

More information

15,432 lbs. (7 000 kg) Operating Weight

15,432 lbs. (7 000 kg) Operating Weight 15,432 lbs. (7 000 kg) Operating Weight 1600 Quantum Specifications ENGINE Isuzu 4JB1direct injected, water cooled, 4-cycle diesel, 4 cylinder, 169.1 CID (2 771 cc), 3.66" (93 mm) bore x 4.02" (102 mm)

More information

G G21E. With more horsepower and a suspension seat, the Glide Cut Pro has everything you need to power through any job. KUBOTA DIESEL RIDE-ON MOWER

G G21E. With more horsepower and a suspension seat, the Glide Cut Pro has everything you need to power through any job. KUBOTA DIESEL RIDE-ON MOWER G G21E With more horsepower and a suspension seat, the Glide Cut Pro has everything you need to power through any job. KUBOTA DIESEL RIDE-ON MOWER Impressive performance that keeps comfortably throughout

More information

FTX. Tracked Carriers

FTX. Tracked Carriers FTX Tracked Carriers FTX128L FTX128R FTX250 FTX290 FTX400LGP FTX600 FTX128L Purpose built featuring both strong cutting and track power, the FTX128L offers productivity and profitability in all applications.

More information

GEHL V400 SKID LOADER

GEHL V400 SKID LOADER Table of Contents GEHL V400 SKID LOADER The World s Largest Skid Loader Key Features 1 Performance 2 Operator s Cab 3 Controls 4 Engine 5 Hydraulics 6 Attachment System 7 Lift Arm 8 Serviceability 9 Specifications

More information

The Dependable Mixer. GeneRation II Staggered Rotor Mixers. Available as Truck, Trailer or Stationary Models. Compost Spreading Attachment

The Dependable Mixer. GeneRation II Staggered Rotor Mixers. Available as Truck, Trailer or Stationary Models. Compost Spreading Attachment The Dependable Mixer Progressive compost technicians know once a proper recipe has been selected, mixing the ingredients is essential to ensure rapid decomposition and quality compost. One of the major

More information

FORESTRY E Q U I P M E N T G SKIDDERS 540G-III 548G-III

FORESTRY E Q U I P M E N T G SKIDDERS 540G-III 548G-III FORESTRY E Q U I P M E N T G SKIDDERS 540G-III 548G-III Operator Station: Comforts such as swivel seat, ergonomically located controls, and all-season climate controls help keep productivity up. Grapple:

More information

ZAXIS 270LC-3 Engine Net Peak Power: 188 hp (140 2,100 rpm Operating Weight: 63,425 lb. ( kg) Backhoe Bucket: 1.74 cu. yd. (1.

ZAXIS 270LC-3 Engine Net Peak Power: 188 hp (140 2,100 rpm Operating Weight: 63,425 lb. ( kg) Backhoe Bucket: 1.74 cu. yd. (1. ZAXIS 270LC-3 Engine Net Peak Power: 188 hp (140 kw) @ 2,100 rpm Operating Weight: 63,425 lb. (28 770 kg) Backhoe Bucket: 1.74 cu. yd. (1.34 m 3 ), 42 in. (1065 mm) ZAXIS 270LC-3 SPECIFICATIONS Engine

More information

SB-60M Extra ELECTRICAL ENGINE OPERATOR STATION COOLING OPERATING WEIGHTS OPTIONAL COMPONENTS HYDRAULICS PIPELAYER. EPA Tier 3/EU Stage IIIA STANDARD

SB-60M Extra ELECTRICAL ENGINE OPERATOR STATION COOLING OPERATING WEIGHTS OPTIONAL COMPONENTS HYDRAULICS PIPELAYER. EPA Tier 3/EU Stage IIIA STANDARD PIPELAYER EPA Tier 3/EU Stage IIIA STANDARD ENGINE Make and model Cummins QSM 11 ELECTRICAL Voltage 24 V Emissions Standard EPA Tier 3/EU Stage IIIA Number of batteries 4 Displacement 11l (671 in3) Battery

More information

ROCK EXCAVATION. Taking Care. of Customers. Worldwide. with Better. Solutions

ROCK EXCAVATION. Taking Care. of Customers. Worldwide. with Better. Solutions ROCK EXCAVATION T E C H N O L O G Y Taking Care of Customers Worldwide with Better Solutions Productive Solutions for Tough Jobs. The innovative Vermeer T1255 Terrain Leveler surface excavation machine

More information

963D WH Waste Handler

963D WH Waste Handler 963D WH Waste Handler Supplement Note: For standard specifications and features, refer to the standard Caterpillar specalog for this machine. Engine Engine Model Cat C6.6 ACERT Net Flywheel Power 141 kw

More information

D8T WH. Waste Handler

D8T WH. Waste Handler D8T WH Waste Handler The Cat D8T Waste Handler has earned a reputation for best-in-class versatility, productivity and resale value. Landfill customers choose the D8T WH because it excels at multiple tasks

More information

HYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (21 L/min) Relief pressure psi (3900 kpa)

HYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (21 L/min) Relief pressure psi (3900 kpa) 9020B Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L ) Fuel injection...

More information

Technical Specifications

Technical Specifications 140 Motor Grader Technical Specifications Engine Engine Model Cat C9.3 Net Power ISO 9249/SAE J1349 186 kw 250 hp Net Power EEC 80/1269 186 kw 250 hp Net Power All-Wheel Drive (AWD) 201 kw 270 hp VHP Plus

More information

SB-85 PIPELAYER. Net Horsepower 238 kw (320 hp) Max Lifting Capacity kg (220,460 lb) Operating Weight kg (134,700 lb)

SB-85 PIPELAYER. Net Horsepower 238 kw (320 hp) Max Lifting Capacity kg (220,460 lb) Operating Weight kg (134,700 lb) SB-85 PIPELAYER Net Horsepower 238 kw (320 hp) Max Lifting Capacity 100 000 kg (220,460 lb) Operating Weight 61 100 kg (134,700 lb) SB-85 PIPELAYER High stability and low ground pressure Easy operation

More information

ITEM 1 ROLLIGON CORPORATION MODEL TPT-2250 TRAILER MOUNTED FRACTURING UNIT

ITEM 1 ROLLIGON CORPORATION MODEL TPT-2250 TRAILER MOUNTED FRACTURING UNIT ITEM 1 ROLLIGON CORPORATION MODEL TPT-2250 TRAILER MOUNTED FRACTURING UNIT 1.0 GENERAL This Rolligon Model TPT-2250 trailer mounted fracturing unit is a diesel powered high-pressure pumping unit designed

More information

SB-30M Extra ELECTRICAL ENGINE OPERATOR STATION COOLING OPERATING WEIGHTS OPTIONAL COMPONENTS HYDRAULICS PIPELAYER. EPA Tier 3/EU Stage IIIA STANDARD

SB-30M Extra ELECTRICAL ENGINE OPERATOR STATION COOLING OPERATING WEIGHTS OPTIONAL COMPONENTS HYDRAULICS PIPELAYER. EPA Tier 3/EU Stage IIIA STANDARD PIPELAYER EPA Tier 3/EU Stage IIIA STANDARD ENGINE Make and model Cummins QSB 6.7 ELECTRICAL Voltage 24 V Emissions Standard EPA Tier 3/EU Stage IIIA Number of batteries 2 Displacement 6.7l (408 in3) Battery

More information

AK 235 AK 435 AK 535 AK 635 / AK 635 SA. For a high-volume, workhorse grinder, the AK 535 provides 530hp of dependable material processing.

AK 235 AK 435 AK 535 AK 635 / AK 635 SA. For a high-volume, workhorse grinder, the AK 535 provides 530hp of dependable material processing. Doppstadt AK series high-speed grinders are engineered for precision performance across a wide range of material applications. The upswing hammermill design results in a consistent, higher-quality product

More information

HYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (20 L/min) Relief pressure psi (3900 kpa)

HYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (20 L/min) Relief pressure psi (3900 kpa) 9010B Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L) Fuel injection... Direct

More information

BC230XL BRUSH CHIPPER

BC230XL BRUSH CHIPPER BC230XL BRUSH CHIPPER BC230XL BRUSH CHIPPER 1 A powerful performance in a small package. The BC230XL combines a 66 hp (49,2 kw) Stage IIIB Kubota diesel engine with a 23 cm x 35,5 cm (9 x 14 ) infeed opening

More information

Lubricant and Coolant Capacity

Lubricant and Coolant Capacity Engine Isuzu AI-4HK1X Tier 3 turbocharged diesel engine with electronic fuel control, 153 Net HP (114 kw), 5.2 Liter displacement, 4-cylinder, water-cooled, EGR with cooler, air-toair intercooler, 24-volt

More information

SB-60 PRELIMINARY PIPELAYER. Net Horsepower 238 kw (320 hp) Max Lifting Capacity kg (158,731 lb) Operating Weight kg (112,655 lb)

SB-60 PRELIMINARY PIPELAYER. Net Horsepower 238 kw (320 hp) Max Lifting Capacity kg (158,731 lb) Operating Weight kg (112,655 lb) SB-60 PIPELAYER Net Horsepower 238 kw (320 hp) Max Lifting Capacity 72 000 kg (158,731 lb) Operating Weight 51100 kg (112,655 lb) PRELIMINARY SB-60 PIPELAYER High stability and low ground pressure Easy

More information

ZAXIS 650LC-3 Engine Rated Power: Operating Weight: Backhoe Bucket:

ZAXIS 650LC-3 Engine Rated Power: Operating Weight: Backhoe Bucket: ZAXIS 650LC-3 n Engine Rated Power: 463 SAE net hp (345 kw) @ 1,800 rpm n Operating Weight: 152,192 lb. (69 033 kg) n Backhoe Bucket: 4.04 yd 3 (3.09 m 3 ), 54 in. (1370 mm) ZAXIS 650LC-3 SPECIFICATIONS

More information

534E LA LANDFILL COMPACTOR. Operating Weight - w/ blade kg (50,485 lb) - w/ bucket kg (53,351 lb) Net Horsepower 169 kw (227 hp)

534E LA LANDFILL COMPACTOR. Operating Weight - w/ blade kg (50,485 lb) - w/ bucket kg (53,351 lb) Net Horsepower 169 kw (227 hp) 534E LA LANDFILL COMPACTOR Net Horsepower 169 kw (227 hp) Compaction ratio 1 : 3.5 Operating Weight - w/ blade 22 900 kg (50,485 lb) - w/ bucket 24 200 kg (53,351 lb) The best in the business for productivity

More information

E2850 REMIXING TRANSFER VEHICLE ENGINEERED INNOVATION

E2850 REMIXING TRANSFER VEHICLE ENGINEERED INNOVATION E850 REMIXING TRANSFER VEHICLE ENGINEERED INNOVATION Leading with Innovation Weiler innovations have transformed the material transfer vehicle market since their introduction and continue to lead the industry

More information

SB-30M PIPELAYER. Max Lifting Capacity kg (72,972 lb) Net Horsepower 140 kw (188 hp) Operating Weight kg (60,803 lb)

SB-30M PIPELAYER. Max Lifting Capacity kg (72,972 lb) Net Horsepower 140 kw (188 hp) Operating Weight kg (60,803 lb) SB-30M PIPELAYER Net Horsepower 140 kw (188 hp) Max Lifting Capacity 33 100 kg (72,972 lb) Operating Weight 27 580 kg (60,803 lb) The DRESSTA SB-30M Extra has been specifically designed to handle and lay

More information

Trenchers for Access network installation

Trenchers for Access network installation Main Technical Specifications s for Access network installation MODEL GROSS POWER ENGINE WEIGHT RANGE ROCKSAW CHAINSAW BUCKET WHEEL ROCK HAWG 300 100 hp (74.5 kw) Perkins 1104D-44T 19,842-22,046 lbs (9.000-10.000

More information

CX210C HYDRAULIC EXCAVATOR HYDRAULIC SYSTEM HYDRAULIC CONTROLS ENGINE MONITOR SYSTEM ELECTRICAL SYSTEM

CX210C HYDRAULIC EXCAVATOR HYDRAULIC SYSTEM HYDRAULIC CONTROLS ENGINE MONITOR SYSTEM ELECTRICAL SYSTEM CX210C HYDRAULIC EXCAVATOR ENGINE Brand Model Type ISUZU GI-4HK1X 4-stroke engine, water-cooled, 4 cylinder common rail injection system, turbocharged with air-cooled intercooler, with tier 3 emission

More information

FP-66 Horizontal Grinder

FP-66 Horizontal Grinder FP-66 Horizontal Grinder Mid-Sized Grinder Designed with Big Grinder Features Streamline your grinding operation with the industry s most efficient fiber processing technology. The Rotochopper Difference

More information

M325B MH Wheeled Material Handler

M325B MH Wheeled Material Handler M2B MH Wheeled Material Handler Engine Engine Model 11 TA Net Flywheel Power 12 kw 18 hp Operating Specifications Maximum Reach. m.9 ft Cat Cab Riser 1.9 m.4 ft Weights Operating Weight 7 2 kg 82,4 lb

More information

CX245D SHORT RADIUS EXCAVATOR TIER 4 FINAL CERTIFIED

CX245D SHORT RADIUS EXCAVATOR TIER 4 FINAL CERTIFIED CX245D SHORT RADIUS EXCAVATOR TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Fuel Isuzu AR-4HK1X Turbocharged w/cooled intercooler/ SCR System Tier 4 Final Requires ultra low-sulfur fuel B5

More information

303.5E CR, 304E CR, 305E CR, 305.5E CR

303.5E CR, 304E CR, 305E CR, 305.5E CR 303.5E CR, 304E CR, 305E CR, 305.5E CR Mini Hydraulic Excavators 303.5E CR 304E CR 305E CR 305.5E CR Engine Engine Model Cat C1.8 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 23.6 kw (31.6 hp) 30 kw

More information

PM-465. Cold Planer. Cat 3406C JWAC Diesel Engine Gross power 373 kw 500 hp Standard Cutting Width 2006 mm 79" Maximum Cutting Depth 305 mm 12"

PM-465. Cold Planer. Cat 3406C JWAC Diesel Engine Gross power 373 kw 500 hp Standard Cutting Width 2006 mm 79 Maximum Cutting Depth 305 mm 12 PM-465 Cold Planer Machine shown may have optional equipment. Cat 3406C JWAC Diesel Engine Gross power 373 kw 500 hp Standard Cutting Width 2006 mm 79" Maximum Cutting Depth 305 mm 12" PM-465 Cold Planer

More information

Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (21 L/min) Relief pressure psi (3900 kpa)

Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (21 L/min) Relief pressure psi (3900 kpa) 9020B Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L ) Fuel injection...

More information

Isuzu BB-6BG1T 396 CID (6.5 L) 138 HP (103 1,950 rpm 392 lbf ft (532 1,600 rpm

Isuzu BB-6BG1T 396 CID (6.5 L) 138 HP (103 1,950 rpm 392 lbf ft (532 1,600 rpm Specifications Engine Electronic engine control, water cooled, 4-cycle diesel, 6 cylinder, turbocharged. Model Displacement Net horsepower Torque 210TL 240TL 290TL 350TL 370TL Isuzu BB-6BG1T 396 CID (6.5

More information

STUMP CUTTERS MINI-WORKFORCE SUPER Jr TRAC Jr RG45X RG45 TRAC Jr X-SERIES TOW-BEHIND

STUMP CUTTERS MINI-WORKFORCE SUPER Jr TRAC Jr RG45X RG45 TRAC Jr X-SERIES TOW-BEHIND STUMP CUTTERS MINI-WORKFORCE SUPER Jr TRAC Jr RG45X RG45 TRAC Jr X-SERIES TOW-BEHIND SUPER TOOTH TRAILERS (800) 392-2686 Wooster, OH Since 1978, starting with the creation of our original RG 145 stump

More information

BR500JG-1A BR500JG-1A MOBILE CRUSHER BR500JG-1A WITH VIBRATORY GRIZZLY FEEDER

BR500JG-1A BR500JG-1A MOBILE CRUSHER BR500JG-1A WITH VIBRATORY GRIZZLY FEEDER BR500JG-1A WITH VIBRATORY GRIZZLY FEEDER FLYWHEEL HORSEPOWER 228 kw 310 HP @ 1950 rpm OPERATING WEIGHT 57153 kg 126,000 lb BR500JG-1A BR500JG-1A MOBILE CRUSHER BR500JG-1A Mobile Crusher WALK-AROUND With

More information

FLYWHEEL HORSEPOWER 228 kw rpm OPERATING WEIGHT kg 84,440 lb MOBILE CRUSHER. Photos may include optional equipment.

FLYWHEEL HORSEPOWER 228 kw rpm OPERATING WEIGHT kg 84,440 lb MOBILE CRUSHER. Photos may include optional equipment. FLYWHEEL HORSEPOWER 228 kw 306 HP @ 1950 rpm OPERATING WEIGHT 38300 kg 84,440 lb MOBILE CRUSHER Photos may include optional equipment. BR480RG-1 Mobile Crusher WALK-AROUND Komatsu s newly designed BR480RG-1

More information

STUMP CUTTERS SUPER TOOTH. (800) Wooster, OH

STUMP CUTTERS SUPER TOOTH. (800) Wooster, OH STUMP CUTTERS SUPER TOOTH (800) 392-2686 Wooster, OH Since 1978, starting with the creation of our original RG 145 stump cutter, Rayco has grown into one of the most recognizable brands in environmental,

More information

Trenchers for Drainage works

Trenchers for Drainage works Main Technical Specifications s for Drainage works MODEL GROSS POWER ENGINE WEIGHT RANGE ROCKSAW CHAINSAW BUCKET WHEEL ROCK HAWG 775DT 5 hp (168 kw) Caterpillar C6.6 ACERT 34,171-55,000 lbs (15.500-24.947

More information

WINDROW ELEVATORS ENGINEERED INNOVATION

WINDROW ELEVATORS ENGINEERED INNOVATION WINDROW ELEVATORS ENGINEERED INNOVATION The road to success starts with the right windrow elevator. When there is a long road to pave, and you need to get the job done quickly, turn to the Weiler E650C

More information

Undercarriage. Lubricant and Coolant Capacity. Travel System

Undercarriage. Lubricant and Coolant Capacity. Travel System MATERIAL HANDLER Operating Weight: 76,49 lbs (8, kg) SAE Net Horsepower: with fan pump 49 HP (69 kw) without fan pump HP (97 kw) Swing Torque: 96,6 lbf-ft. (66. kn m) Engine Isuzu AH-6WGXYSS- Tier turbocharged

More information

A 1 SERVICE SPECIFICATIONS

A 1 SERVICE SPECIFICATIONS A1 A2 Clutch CLUTCH Specifications Pedal height (from asphalt sheet) Release point (from pedal stroke end position) Push rod play at pedal top Pedal freeplay Disc rivet head depth Disc runout Diaphragm

More information

EC240B, EC290B, EC360B, EC460B

EC240B, EC290B, EC360B, EC460B VOLVO CRAWLER EXCAVATORS EC240B, EC290B, EC360B, EC460B Quickspecs EC240B EC290B EC360B EC460B Operating Wt. 24.8-27.6 t 24.8-27.6 t 36.3-38.4 t 47.9 t Std. Bucket 0.5-2.0 m3 0.5-2.0 m3 1.4-3.0 m3 1.8-3.8

More information

SX-6. Soil Stabilizer/Reclaimer. SX-6e/ex

SX-6. Soil Stabilizer/Reclaimer. SX-6e/ex Soil Stabilizer/reclaimer SX-6e/ex Soil Stabilizer/Reclaimer SX-6 ENGINE SX-6e: Tier 4i; Cummins QSX15 620 hp (447 kw) Diesel @ 1,850 rpm SX-6ex: Tier 3; Cummins QSX-15 620 hp (447 kw) @ 1,850 rpm* * ex

More information

D11T/D11T CD. Track-Type Tractor

D11T/D11T CD. Track-Type Tractor D11T/D11T CD Track-Type Tractor Engine Tier 2 Equivalent Weights Engine Model Cat C32 ACERT Operating Weight 104 257 kg 229,848 lb Net Power SAE J1349/ISO 9249 634 kw 850 hp Shipping Weight 37 485 kg 82,640

More information

L-SERIES CRAWLER DOZERS 1150L / 1650L PERFECT IN EVERY MISSION

L-SERIES CRAWLER DOZERS 1150L / 1650L PERFECT IN EVERY MISSION L-SERIES CRAWLER DOZERS 1150L / 1650L PERFECT IN EVERY MISSION casece.com EXPERTS FOR THE REAL WORLD SINCE 1842 BOOST YOUR PRODUCTIVITY POWER AND EFFICIENCY Drawbar pulling leadership: the hydrostatic

More information

Inline 6 series turbocharger with exhaust gas recirculation (EGR) and selective catalytic reduction (SCR) Valves per Cylinder 4

Inline 6 series turbocharger with exhaust gas recirculation (EGR) and selective catalytic reduction (SCR) Valves per Cylinder 4 SPECIFICATIONS Engine Manufacturer and Model John Deere PowerTech PSS 6090 Non-Road Emission Standards EPA Final Tier 4/EU Stage IV Configuration Inline 6 series turbocharger with exhaust gas recirculation

More information

Ditch Witch 420sx, 410sx, 100sx, Zahn R300, Zahn R230 VIBRATORY PLOWS. ditchwitch.com

Ditch Witch 420sx, 410sx, 100sx, Zahn R300, Zahn R230 VIBRATORY PLOWS. ditchwitch.com Ditch Witch 420sx, 410sx, 100sx, Zahn R300, Zahn R230 VIBRATORY PLOWS ditchwitch.com CMWC-1441_REV_VibPlows_V7.indd 1 feel the earth move. ditchwitch.com CMWC-1441_REV_VibPlows_V7.indd 2-3 ditch witch

More information

350 MH. Material Handler

350 MH. Material Handler 0 MH Material Handler The Cat 0 Material Handler is specifically designed for the scrap and material handling customer. This machine uses the most sophisticated manufacturing technology to ensure the highest

More information

Engine 310SK 310SK TC John Deere PowerTech E 4045HT063 turbocharged,

Engine 310SK 310SK TC John Deere PowerTech E 4045HT063 turbocharged, SK/SK TC Engine SK SK TC Manufacturer and Model John Deere PowerTech TM E HT7 turbocharged, standard John Deere PowerTech E HT6 turbocharged, standard Non-Road Emissions Standard EPA Interim Tier /EU Stage

More information

ZX210F-3. Road Builder. 122 kw (164 hp) Live Heel Fixed Heel Butt & Top ZX210F

ZX210F-3. Road Builder. 122 kw (164 hp) Live Heel Fixed Heel Butt & Top ZX210F ZAXIS DASH-3 Foresters Road Builder Processor Live Heel Fixed Heel Butt & Top Power Clam Models 122 kw (164 hp) ZX210F ZAXIS DASH-3 Foresters EXTREME Productivity. tough machines for tough jobs. Hitachi

More information

CX245D SHORT RADIUS EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED

CX245D SHORT RADIUS EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED CX245D SHORT RADIUS EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Fuel Isuzu AR-4HK1X Turbocharged w/cooled intercooler/ SCR System Tier 4 Final Requires ultra low-sulfur

More information

BACKHOE LOADERS CONTENTS

BACKHOE LOADERS CONTENTS BACKHOE LOADERS CONTENTS Features...............................-1 Specifications...........................-3 416E:......................-6 Lift Capacities.........................-8 420E/420E IT:......................-9

More information

NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 69,450 lb BR380JG-1 BR 380 JG MOBILE CRUSHER. Photos may include optional equipment.

NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 69,450 lb BR380JG-1 BR 380 JG MOBILE CRUSHER. Photos may include optional equipment. NET HORSEPOWER 134 kw 180 HP @ 2050 rpm OPERATING WEIGHT 31600 kg 69,450 lb BR 380 JG MOBILE CRUSHER Photos may include optional equipment. M OBILE C RUSHER WALK-AROUND The newly designed Komatsu mobile

More information

MOBILE CRUSHER. BR580JG-1 With Tier 3 Engine. NET HORSEPOWER 257 kw rpm OPERATING WEIGHT kg 108, ,440 lb

MOBILE CRUSHER. BR580JG-1 With Tier 3 Engine. NET HORSEPOWER 257 kw rpm OPERATING WEIGHT kg 108, ,440 lb NET HORSEPOWER 257 kw 345 HP @ 1900 rpm OPERATING WEIGHT 49000-51000 kg 108,000-112,440 lb BR580JG-1 With Tier 3 Engine BR 580 JG MOBILE CRUSHER Photo may include optional equipment BR580JG-1 M OBILE C

More information