PLEASE PURCHA Engine Driven Brush Chipper File: C

Size: px

Start display at page:

Download "PLEASE PURCHA Engine Driven Brush Chipper File: C"

Scott Henry
5 years ago
Views:

1 PLEASE PURCHA Engine Driven Brush Chipper File: C796- Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Address: Tri-State Bobcat, Inc Nick Kentros 3101 Spruce St Little Canada, MN Spec # Information Requested Answer Furnish separate price quote for: Engine Driven Brush Chipper 1.0 Engine Driven Brush Chipper Make & Model Bandit 255XP Disc Brush Bandit Is the Engine Tier IV Compliant (Yes/No) Yes, where indicated Chipper inch capacity 15" Weight 7,700 lbs (approximate) Engine type, model, HP, etc. GM 4.3L, 130 hp GAS engine Fuel tank size 40 gallons Battery size (CCA) 1010 CCA Instrumentation Down, voltage, amp, temp gauges Trailer tires (2) 235/75R 17.5" Trailer suspension type & capacity Single 12,000 pound Leaf Spring axle Trailer Brakes Electric Trailer hitch type 2 1/2" Pintle Feed table length 66" Distance from feed roller to ground 88" Feed rate 120 FPM Feed roller size and configuration (2) 24-1/2" wide x 10-5/8" diameter, horizontal Chipper cutting wheel size 45" diameter x 2" thick Number of chipper knives 4 Knife description information 1/2" thick x 4-1/2" wide x 8-15/32" long Height of discharge chute 8' 6" Chute rotation Manual 360 degree w/12" adj. chip deflector Hydraulic tank capacity 13 gallons

2 Warranty 1 year or 2000 hrs plus 5 year Bandit manufactured related to disc, drum & slide box components PRICE: $34,148.50

3 Export To Multiple PDF Files Software VENDOR NAME: TRI-STATE BOBCAT, INC MAKE AND MODEL OFFERED: BANDIT 255XP Spec # Description Qty Price Subtotal 2.0 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with 2.1, 2.2, etc., until you have listed all engine options. Use as many numbers as you need. 2.1 Caterpillar C3.4, horsepower with PGL auto clutch - Tier 4 FINAL (Includes pre cleaner, fuel saver, Bandit control system, engine block heater, pop-up style air cleaner and reversing auto feed. Also includes 3 year / 3,500 engine warranty) 1 $ 10, $ 10, Caterpillar C4.4, 147 horsepower with over center style clutch - Tier 4i (Includes pre cleaner, fuel saver, Bandit control system, Engine block heat, pop-up style air cleaner, and reversing auto feed. Also includes 3 year / 3,500 engine warranty) 1 $ 13, $ 13, Caterpillar C4.4, 147 horsepower with over center style clutch - Tier 4 FINAL(Includes pre cleaner, fuel saver, block heater, Bandit control system, and reversing auto feed. Also includes 3 year / 3,500 engine warranty) 1 $ 16, $ 16, saver, Bandit control system and reversing auto feed. Also includes 3 year / 3,500 engine warranty) 1 $ 14, $ 14, Caterpillar C4.4, 174 horsepower with WPT over center clutch with high drives - Tier 4i (Includes pre cleaner, fuel saver, Bandit control system and reversing auto feed. Also includes 3 year / 3,500 engine warranty) (Track or loader units only) 1 $ 20, $ 20, Caterpillar C4.4, 174 horsepower with over center style clutch - Tier 4 FINAL (Includes pre cleaner, fuel saver, block heater, Bandit control system and reversing auto feed. Also includes 3 year / 3,500 engine warranty) 1 $ 17, $ 17, Caterpillar C7.1L, 202 horsepower engine with Twin Disc triple plate clutch - Tier 4 FINAL (Includes pre cleaner, fuel saver, Bandit control system and reversing auto feed. Also includes 3 year / 3,500 engine warranty) 1 $ 27, $ 27, Perkins 854E-E34TA, horsepower with 13" PGL auto clutch - Tier 4 FINAL (Includes pre cleaner, fuel Saver, block heater, Bandit control system, and reversing auto feed. Also includes 3 year / 3,500 engine warranty) 1 $ 10, $ 10, Perkins 1204E-E44TTA, 147 horsepower with over center style clutch - Tier 4i (Includes pre cleaner, Fuel Saver, Bandit control system, engine block heater, pop-up style air cleaner and reversing auto feed. Also includes 3 year / 3,500 engine warranty) 1 $ 13, $ 13, Perkins 1204F, 147 horsepower with over center style clutch - Tier 4 FINAL (Includes pre cleaner, Fuel Saver, Bandit control system and reversing auto feed. Also includes 3 year / 3,500 engine warranty) 1 $ 16, $ 16, Perkins 1204E-E44TTA, 174 horsepower with over center style clutch - Tier 4i (Includes pre cleaner, Fuel Saver, Bandit control system and reversing auto feed. Also includes 3 year / 3,500 engine warranty) 1 $ 14, $ 14, Perkins 1204F Twin Turbo, 174 horsepower with over center style clutch - Tier 4 FINAL (Includes pre cleaner, Fuel Saver, Bandit control system and reversing auto feed. Also includes 3 year / 3,500 engine warranty) 1 $ 17, $ 17, Perkins 1206F, 202 horsepower engine with Twin Disc triple plate clutch - Tier 4 FINAL (Includes pre cleaner, Fuel Saver, Bandit control system and reversing auto feed. Also includes 3 year / 3,500 engine warranty) 1 $ 26, $ 26, John Deere 4045HFC04, 139 horsepower engine with NACD spring loaded clutch - Tier 4 FINAL (Includes Bandit control panel, reversing auto feed, fuel saver, and pre cleaner along with 2 year / 2,000 hour warranty) 1 $ 20, $ 20, John Deere 4045HFC09, 173 horsepower engine with NACD spring loaded clutch - Tier 4 FINAL (Includes Bandit control panel, reversing auto feed, fuel saver, and pre cleaner along with 2 year / 2,000 hour warranty) 1 $ 25, $ 25, Drive system for engine horsepower options up to 130 horsepower 1 $ - $ Drive system & longer frame for higher horsepower engines (also includes 40 gallon fuel tank) (Engines 139 horsepower and above) 1 $ $ Lockable aluminum battery box with (1) 1,010 CCA Interstate battery (Standard on all engines excluding Cummins 99 horsepower on up) 1 $ - $ Lockable steel battery box with (1) 1,400 CCA Interstate battery 1 $ - $ Lockable steel battery box with (1) 1,010 CCA Interstate battery (All engines excluding Cummins) 1 $ $ Battery Disconnect Switch 1 $ $ Reversing Auto Feed with digital tach/hour meter for disc-style chipper (Unit with standard feed system) 1 $ 1, $ 1, Spark arrestor muffler (Available for diesel engines only) 1 $ $ Engine pre cleaner - Engine Air (John Deere Engines only) 1 $ $ Shut-off switch for engine shut-down located on both sides of infeed hopper 1 $ $ Restriction indicator on air cleaner, pop-up type. 1 $ $ Tachometer and hour meter 1 $ $ Biodegradable hydraulic oil (Petro Environ MV46), includes 16 gallon hydraulic tank and hydraulic oil cooler 1 $ 1, $ 1, Heavy-duty lockable filler cap covers 1 $ $ Shut- off valve for fuel tank 1 $ $ Gate valve for hydraulic tank 1 $ $ Mesh strainer in hydraulic tank filler opening 1 $ $ Mesh strainer in fuel tank filler opening 1 $ $ TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, 3.0 number these items starting with 3.1, 3.2, etc. 3.1 Tandem 7,000 pound Torflex EZ lube axles with electric brakes 1 $ $ Tandem 8,000 pound Torflex EZ lube axles with electric brakes 1 $ 1, $ 1, (2) 235/75R 17.5" tires mounted on 8-bolt heavy-duty gray rims 1 $ - $ (4) 265/75R 16" tires mounted on 8-bolt white spoke rims 1 $ $ (4) 235/85R 16" tires mounted on 8-bolt white spoke rims 1 $ $ (4) 245/75R 16" tires mounted on 8-bolt DUAL rims 1 $ $ (4) 215/75R 17.5" tires mounted on 8-bolt heavy-duty gray rims 1 $ $ (4) 215/75R 17.5" tires mounted on 8-bolt aluminum rims 1 $ $

4 3.9 Aluminum bolt on fenders (Approximately 1/8" thick) (standard fender) 1 $ - $ Bolt on steel fenders (Constructed of 3/16" HR Plate) (in lieu of standard aluminum fenders) 1 $ $ /16" heavy-duty steel weld on tandem axle fenders (must be selected with tandem axle option) 1 $ $ Aluminum bolt on tandem axle fenders (in lieu of tandem steel for tandem axle units) 1 $ $ Steel DUAL wheel fenders 1 $ $ Aluminum DUAL wheel fenders 1 $ $ /2" Wallace Forge pintle hitch 1 $ - $ " Bulldog ball hitch 1 $ $ /16" Wallace Forge ball hitch 1 $ $ /16" Bulldog ball hitch 1 $ $ " Buyer's Product pintle hitch 1 $ $ /16" ball hitch with Model 20 actuator for hydraulic brake axles 1 $ $ " pintle hitch with Model 20 actuator for hydraulic brake axles 1 $ $ Spare tire mounted on white spoke rim (245/75R 16") 1 $ $ Spare tire mounted on white modular rim (235/85R 16") 1 $ $ Spare tire mounted on heavy-duty gray rim (215/75R 17.5") 1 $ $ Spare tire mounted on aluminum rim for (215/75R 17.5") 1 $ $ Spare tire mounted on aluminum rim (245/75R 16") 1 $ $ Spare tire mounted on dual rim (245/75R 16") 1 $ $ Bolt on spare tire mount 1 $ $ Pintle Hitch lock Mount 1 $ $ " longer stationary tongue 1 $ $ PRONG (Flat Pin/RV-Style) Male trailer plug 1 $ $ PRONG (Round Pin) Male trailer plug 1 $ $ Orange fender markers to be mounted on each fender 1 $ $ Single rear stabilizer 1 $ $ ,000 pound capacity tongue jack with 2,500 pound HD caster wheel (in lieu of standard jack) 1 $ $ ,000 pound capacity tongue jack with spring return pad 1 $ $ (2) Mud Flaps (1/4" x 12" x 18") 1 $ $ Hydraulic tongue jack w/ multiple position drop leg 1 $ 1, $ 1, Telescoping tongue with single 20" adjustment 1 $ $ Hydraulic articulating tongue, w/ control valve, 45 degree articulation curbside 1 $ 1, $ 1, Frame / Fender supports 1 $ $ CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto 4.0 feed, etc. 4.1 Model 50 back hoe loader with swing-out operator's console, joystick controls, 42 gallon fuel and hydraulic tanks, and model 1850 tapered infeed hopper with 30" weld on tray. 1 $ 18, $ 18, over hydraulic pedal that will allow for the activation of the feed wheels once pressure is placed on it). 1 $ 1, $ 1, Optional hydraulic bottom bump bar for infeed tray with override buttons on each side of infeed (can be used to halt the forward motion of the feed wheels) 1 $ 1, $ 1, /2" high x 64" wide tapered HD infeed hopper with lexan taillight covers and 30" weld on tray 1 $ $ Double teeth on bottom feed wheel (25" wide feed wheel) 1 $ $ Clear curtains to be installed on infeed (Please specify whether last chance cables should be mounted in FRONT of or BEHIND curtains) (Requires specification) 1 $ $ Rubber infeed curtain for infeed hopper (Please specify whether last chance cables should be mounted in FRONT of or BEHIND curtains) (Requires specification) 1 $ $ degree hydraulic controlled swivel discharge chute with manual 12" chip deflector 1 $ 1, $ 1, degree hydraulic controlled swivel discharge with hydraulic controlled 12" chip deflector 1 $ 1, $ 1, Stops on discharge degree turn. 1 $ $ DELETE standard hand crank height and swivel discharge (to be manual swivel and non-height adjustable) 1 $ (656.00) $ (656.00) 5.0 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic wench, etc. 5.1 Hydraulic winch mounted on infeed hopper (does not include winch line) (Please specify if winch end is to be set-up with fairlead or rollers) (Requires specification) 1 $ 2, $ 2, ' Amsteel Blue winch rope with HD steel thimble on end (shipped loose) 1 $ $ "Patented" Kar-Tech radio remote control kit for hydraulic winch only (Must also select hydraulic winch option) 1 $ 1, $ 1, "Patented" Kar-Tech radio remote control kit for hydraulic winch and hydraulic lift cylinder (Note: In lieu of a manual lift cylinder bar, lift cylinder control switches will be mounted on each side of infeed to allow lift cylinder control if needed. Must 1 $ 2, $ 2, Hydraulic flow control for feed wheel rate adjustment (For machine with autofeed) (for units with autofeed) 1 $ $ Hydraulic flow control for feed wheel rate adjustment (for units without autofeed) 1 $ $ Hydraulic lift cylinder for top feed wheel with autofeed (controlled manually unless wireless radio remote option is selected) (for units with autofeed) 1 $ $ Hydraulic lift cylinder for top feed wheel without autofeed (controlled manually unless wireless radio remote option is selected) (for units without autofeed) 1 $ 1, $ 1, "Patented" Kar-Tech radio remote for hydraulic lift cylinder (Note: In lieu of a manual lift cylinder bar, lift cylinder control switches will be mounted on each side of infeed to allow lift cylinder control if needed (must also select hydraulic lift cyli 1 $ 1, $ 1, Pressure Check Gauge 1 $ $ OTHER OPTIONS: Use this section to offer other options 6.1 Standard Imron Industrial Urethane Bandit Yellow 1 $ - $ Standard Imron Industrial Urethane White 1 $ - $ Standard Imron Industrial Urethane Alert Orange 1 $ - $ Standard Imron Industrial Urethane Cat. Yellow 1 $ - $ Standard Imron Industrial Urethane Green 1 $ - $ Standard Imron Industrial Urethane Black 1 $ - $ Special Imron Industrial Paint (please specify paint color and number) (Requires specification) 1 $ $

5 6.8 Special Imron 5000 Paint (please specify paint color and number) (Requires specification) 1 $ $ Additional dual-edge knife 1 $ $ A.R. plate anvil in lieu of standard 1 $ $ Knife saver kit (includes sharpener, file, safety gloves, and carrying case) 1 $ $ Debris resistant bearing package in lieu of standard 1 $ $ Disc chipper tool kit to change knives 1 $ $ Model 255 wear kit (Includes 3 sets of knives, bolts, and nuts/washers, along with 1 anvil with hardware, knife sharpener, and anvil gauge) 1 $ $ Tool kit for Handfed Chippers Includes: - Screwdriver set (4 pc) - Â½â Drive Torque wrench ( ft) - Â½â Drive Socket set w/ratchet (18 pc) - Crescent wrench - Open end wrench set (14 pc) - Balldriver tool set (13 pc) - Â½â Drive slott 1 $ $ Additional 5VX1320 D-V wedge belt (Five required for Model 255XP) 1 $ $ Degree Amber Strobe Warning Light w/guard 1 $ $ Amber color strobe light 1 $ $ Brush guard for amber warning light 1 $ $ Pole style cone holder (weld on) 1 $ $ Wheel chock holders on fenders (2) - Painted Steel (weld on) 1 $ $ Wheel chock holders on fenders (2) - Tread Bright aluminum (bolt on) 1 $ $ Rubber wheel chocks for tires (2) 1 $ $ Extra chipper operators manual (standard version) 1 $ $ Extra engine operators manual 1 $ $ Wilton 5 1/2" swivel steel vice, w/ mount 1 $ $ Hydraulic Last Chance Cables 1 $ $ /2 pound fire extinguisher with mount 1 $ $ Spring loaded cleanout door (in lieu of standard) 1 $ $ Non skid coating on tongue and all step on areas 1 $ $ Combination English / Canadian French decals (Note: these would be the safety decals only) 1 $ $ " x 6 1/2" inspection window on belt shield 1 $ $ Hoop style cone holder (Weld on to infeed) 1 $ $ Special bolt-on hoop style cone holder 1 $ $ Bolt-on Double Cone Holder 1 $ $ Grease gun (10,000 PSI) 1 $ $ EXTENDED WARRANTY OPTIONS Year (Bandit parts only) extended warranty. Total warranty - 24 months / 2000 hours Price: $ DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED DELIVERY STARTING POINT - City, State, Zip PRICE PER LOADED MILE: $ MINIMUM DELIVERY CHARGE (if applicable) $ 9.0 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: $ Weekly Rental Rate: $ Monthly Rental Rate: $ Percent (%) of Rental Fee applied to purchase price: % If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $ DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES 10.0 (See Special Terms and Conditions) Price List Date and Number: % Discount

Spec # Information Requested Answer

Spec # Information Requested Answer Price quote for: Engine Driven Brush Chipper File: C796-12082014 Vendor Name: Contact Person: Street Address: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat, Inc Nick Kentros