TRACTOR: LOADER-BACKHOE

Transcription

1 Seq. # Price quote for: TRACTOR: LOADERBACKHOE Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Address: Ziegler Inc. Jeff Drake, Richard Alness 901 West 94th Street Bloomington, MN Spec # Information Requested Answer 1.0 Make & Model Caterpillar 420E Engine HP gross/net (SAE) Aspiration Transmission, type and number of forward and reverse gears Hydraulic pump (GPM and PSI) GPM for backhoe GPM for loader Brakes Steering Drive Axles Front tires, size and type Rear tires, size and type Backhoe digging depth (SAE) (Standard stick) Backhoe digging depth 2' flat bottom (SS) Backhoe reach from swing pivot at ground line (SS) Backhoe loading height (SS) Backhoe loading reach (SS) Backhoe digging depth (SAE) (Retracted extendable stick) 101/93 Caterpillar C4.4 DIT Turbo charged Standard 4F4R power shuttleon the go Variable displacement, load sensing, closed center 43 GPM at 3611 PSI 43 (full force to cutting edges at all engine speeds) 43 (full force to cutting edges at all engine speeds) Meets SAE J1473 and ISO 3450 Fully enclosed hydraulic, multiple disk, self adjusting boosted for low pedal efforts Full hydrostatic with secondary capability in case of power failure, double acting cylinder Pendulum mounted, permanently sealed and lubricated 11L16 12 ply 19.5L24 R4 12 ply 14'4" 14'2" 18'5" 11'11" 5'10" 14'5"

2 Seq. # Backhoe digging depth (SAE) (Extended extendable stick) 17'11" Backhoe digging depth 2' flat bottom (RES) 14'4" Backhoe digging depth 2' flat bottom (EES) 17'9" Backhoe reach from swing pivot at ground line (RES) 18'7" Backhoe reach from swing pivot at ground line (EES) 21'10" Backhoe loading height (RES) 11'9" Backhoe loading height (EES) 13'7" Backhoe loading reach (RES) 6'2" Backhoe loading reach (EES) 9'1" Loader capacity (SAE) standard bucket 1.25 cubic yards Loader standard bucket width 84" Loader maximum operating height Loader lift capacity at maximum height Loader breakout force Loader maximum hinge pin height Loader dump reach at maximum height Loader maximum bucket roll back at ground level 13'9" 7,046 lbs. 12,250 lbs. 10'10" 2'10" 44 degrees Loader digging depth, with bucket flat 4" Lights, front/rear Gauges Warranty Term (months, years) Working 4 front, 4 rear Coolant temp, fuel level, tachometer, hour meter, torque converter oil temp Standard Manufacturers warranty for one (1) year./ unlimited hours See attached certificate. BASE UNIT PRICE: $ 63,890.00

3 Seq. # Price quote for: TRACTOR: LOADERBACKHOE VENDOR NAME: Ziegler Inc. MAKE AND MODEL Caterpillar 420E Spec # Description Qty Price Subtotal 1.0 BASE UNIT PRICE: $ 63, $ 2.0 OPERATOR ENVIRONMENT Use this section to offer operator environment options. Number items starting with 2.1, 2.2, etc. Use as many numbers as you need. 2.1 ROPS Canopy $ (4,830.00) $ 2.2 Deluxe Cab (includes window defroster, front and rear washer and wiper, heater/pressurizer, left and right side doors with locks, coat hook, interior rearview mirror, tilt steering column, floor mat, air suspension fabric seat, radioready headliner, two internal and one external power receptacles, autoup stabilizers, and system indicators for hydraulic filter service and hydraulic termperature warning) 2.3 Deluxe cab with A/C (includes all options listed in 2.2 plus air conditioning) $ 1, $ 2.4 Seat belt, 2" wide 2.5 Seat belt, 3" wide $ $ 2.6 Tool box 2.7 AM/FM radio $ $ 2.8 Mirrors, exterior $ $ 2.9 Ride control $ $ 2.10 Fire extinguisher, mounted $ $ 2.11 Padlocks, vandalism $ $ 2.12 Operator cooling fan $ $ 3.0 ELECTRICAL Use this section to offer electrical options. Number items starting with 3.1, 3.2, etc. Use as many numbers as you need. 3.1 Three power receptacles amp alternator 3.3 Batteries (2), heavy duty, 880 CCA each 3.4 Beacon, magnetic mount $ $ 3.5 Whelen strobe with blue or amber lens $ $ 3.6 Security System, Cat MSS $ $ 3.7 Product Link (PL321 requires subscription) $ 1, $ 4.0 POWERTRAIN Use this section to offer powertrain options. Number items starting with 4.1, 4.2, etc. Use as many numbers as you need. 4.1 Two Wheel Drive with 11L16 12 ply F3 Goodyear Laborer front tires and 19.5L24 12 ply R4 Goodyear IT525 rear tires 4.2 All Wheel Drive with 12.5/ I3 Goodyear Suregrip Lug front tires and 19.5L24 12 ply R4 Goodyear IT525 rear tires (can be engaged on the go) $ 5, $ 4.3 Autoshift transmission with 5 forward, 3 reverse speeds. Automatically shifts between second gear and highest selected gear. Also can be operated in manual mode (must also choose 4.2 all wheel drive) $ 2, $ 4.4 High ambient cooling 4.5 Open circuit breather 4.6 Antifreeze 58F (standard 20F) $ $

4 Seq. # AXLES & TIRE OPTIONS Use this section to offer axle and tire options. Number items starting with 5.1, 5.2, etc. Use as many numbers as you need. 5.1 Goodyear two wheel drive tires (front tires 11L16 (12ply) F3 Goodyear Laborer, rear tires 19.5L24 (12 ply) R4 Goodyear IT525) 5.2 Firestone two wheel drive tires (front tires 11L16 (12ply) F3 Firestone Industrial Special, rear tires 19.5L24 (12 ply) R4 Firestone ATU) Firestone all wheel drive tires (must also choose 4.2 all wheel drive 12.5/ ply I3 Firestone NHS Super Traction Loader front tires and 19.5L24 12 ply R4 Firestone ATU rear tires 5.4 Firestone flotation all wheel drive tires (must also choose 4.2 all wheel drive front tires 12.5/8018 Firestone NHS 12 ply I3, rear tires 21L24 16 ply R4 Firestone ATU) Combination tires all wheel drive (must also choose 4.2 all wheel drive front tires 340/80R 18 Michelin, rear tires 19.5L24 (12 ply) R4 Firestone ATU) Michelin radial all wheel drive tires (must also choose 4.2 all wheel drive front tires 340/80R 18 Michelin, rear tires 19.5L R24 Michelin) 1, Front fenders for use with all wheel drive Rear fender extensions $ $ 5.9 Counterweight, 510 lbs $ $ 5.10 Counterweight, 1,075 lbs $ 1, $ 6.0 HYDRAULICS Use this section to offer hydraulic options. Number items starting with 6.1, 6.2, etc. Use as many numbers as you need. 6.1 Backhoe loader hydraulics 4 function (boom, bucket, stick, and swing included with standard stick) 6.2 Backhoe loader hydraulics 5 function (boom, bucket, stick, and swing additional valve with right hand joystick thumb roller) $ $ 6.3 Backhoe loader hydraulics 6 function (boom, bucket, stick, and swing two additional valves with right hand and left hand joystick thumb rollers) $ $ 6.4 Combined aux. lines (for use with std or estick) routed to midpoint of stick for use with oneway or twoway flow work tools $ 2, $ 6.5 Lines to attachment from midpoint of stick $ $ 6.6 3rd valve loader hydraulics (includes valves, lines and controls) $ $ 6.7 Hydraulic oil cooler 6.8 Quick disconnect for use with 6.4 or 6.5 above $ $ 6.9 IT control, aux. attachments (includes broom angle switch and harness) $ $ 7.0 BACKHOE OPTIONS Use this section to offer backhoe options. Number items starting with 7.1, 7.2, etc. Use as many numbers as you need. 7.1 Extendible stick (requires 6.2 or 6.3) $ 2, $ 7.2 Quick coupler, manual pin grabber $ 1, $ 7.3 Quick coupler, manual pin lock $ 1, $ 7.4 Extra set of bucket pins (for use with quick coupler) $ $ Standard Duty Buckets $ " with 3 teeth $ $ " with 4 teeth $ $ " with 5 teeth $ $ " with 5 teeth $ $ " with 6 teeth $ 1, $ Heavy Duty Buckets $ with 3 teeth $ $ with 3 teeth $ 1, $ with 4 teeth $ 1, $ with 5 teeth $ 1, $ with 5 teeth $ 1, $ with 6 teeth $ 1, $ Heavy Duty Rock Buckets $ with 3 teeth $ 1, $ with 4 teeth $ 1, $

5 Seq. # with 5 teeth $ 1, $ with 5 teeth $ 1, $ " with 5 teeth $ 1, $ Soil Excavation Buckets $ " with 4 teeth $ 1, $ " with 5 teeth $ 1, $ " with 5 teeth $ 1, $ " with 6 teeth $ 1, $ Heavy Duty Buckets for use with Pin Lock coupler $ with 3 teeth $ $ with 4 teeth $ 1, $ with 5 teeth $ 1, $ with 5 teeth $ 1, $ " with 5 teeth $ 1, $ Ditch Buckets $ CFT $ 2, $ CFT $ 2, $ CFT $ 2, $ 7.33 Pilot Operated Joystick Controls, 2 lever, excavator style 7.34 Pattern control changer, Excavator to SAE Caterpillar H95ES hydraulic hammer (requires mounting bracket, tool and connecting lines) $ 20, $ 7.36 Tool, chisel, cross cut for H95 $ $ 7.37 Tool, chisel, in line for H95 $ $ 7.38 Tool, moil for H95 $ $ 7.39 Mounting bracket for H65, H75, H95 $ $ 7.40 Connecting lines for H65, H75, H95 $ $ 7.41 Caterpillar H75ES hydraulic hammer (requires mounting bracket, tool and connecting lines) $ 13, $ 7.42 Tool, chisel, cross cut for H75 $ $ 7.43 Tool, chisel, in line for H75 $ $ 7.44 Tool, moil for H75 $ $ 7.45 Caterpillar H65DS hydraulic hammer (requires mounting bracket, tool and connecting lines) $ 9, $ 7.46 Tool, chisel for H65 $ $ 7.47 Tool, moil for H65 $ $ 7.48 Auto lube kit for hammer $ 1, $ 7.49 Caterpillar CVP40 vibratory plate compactor with fixed dedicated mounting bracket $ 6, $ 7.50 Swivel bracket for CVP40 $ 1, $ 7.51 Backfill blade for Caterpillar plate compactor $ $ 7.52 Caterpillar Thumb, fixed, stiff link $ 2, $ 7.53 Caterpillar Thumb, hydraulic $ 4, $ 7.54 Flip over type stabilizer pads 7.55 Stabilizer cylinder guards to protect cylinder rods from rocks $ $ 7.56 Boom wear plate $ $ 8.0 FRONT LOADER OPTIONS Use this section to offer front loader options. Number items starting with 8.1, 8.2, etc. Use as many numbers as you need. 8.1 Bucket, general purpose, pinon, 1.25 cu. yd.with bolton edge $ 2, $ 8.2 Bucket, general purpose, pinon, 1.3 cu. yd.with bolton edge $ 2, $ 8.3 Bucket, general purpose, pinon, 1.4 cu. yd. with bolton edge $ 2, $ 8.4 Bucket, multi purpose, pinon, 1.3 cu. yd. with bolton edge $ 4, $ 8.5 Bucket, multi purpose, pinon, 1.4 cu. yd. with bolton edge $ 5, $ 8.6 Pallett forks, pinon, 60" carriage and 48" nonswinging, nonfloating tines $ 2, $ 8.7 Loader quick coupler $ 6, $ 8.8 IT Loader Linkage with parallel lift (includes pilot controls, front hydraulic quick coupler and multipurpose loader hydraulics, service harness, and control IT aux. hydraulics) $ 4, $ 8.9 Bucket, general purpose, for use with quick coupler, 1.3 cu. yd.with bolton edge $ 2, $ 8.10 Bucket, multi purpose, for use with quick coupler, 1.4 cu. yd.with bolton edge $ 5, $

6 Seq. # Fork carriage for use with quick coupler (need to order either 8.12, 8.13, or 8.14 tines) $ 1, $ 8.12 Fork Tines: 2" x 5" x 42" quantity of two $ $ 8.13 Fork Tines: 2" x 5" x 48" quantity of two $ $ 8.14 Fork Tines: 2" x 5" x 54" quantity of two $ 1, $ 8.15 Material handling arm for use with quick coupler (manually adjustable three sections) $ 2, $ 8.16 Hydraulic angle blade for use with quick coupler (111" wide, 41" high requires 3rd valve loader hydraulics) $ 8, $ 8.17 BA25 hydraulic angle broom for use with quick coupler (98.4" width straight, 85.2" width angled at 30 degrees, 27.5" brush diameter requires 3rd valve loader hydraulics) $ 11, $ 8.18 Addition to 8.17 for broom with water $ 3, $ 8.19 BA25 manual angle broom for use with quick coupler (98.4" width straight, 85.2" width angled at 30 degrees, 27.5" brush diameter requires 3rd valve loader hydraulics) $ 9, $ 8.20 BP25 hydraulic pickup broom for use with quick coupler (98.4" sweeping width, 27.5" brush diameter requires 3rd valve loader hydraulics) $ 7, $ 8.21 SA25 hydraulic angle broom for use with quick coupler (98.4" width straight, 85.2" width angled at 30 degrees, 36" brush diameter requires 3rd valve loader hydraulics) $ 13, $ 8.22 Addition to 8.21 for broom with water $ 3, $ 8.23 Hydraulic reversible snow plow with trip edge for use with quick coupler (126.5" wide, 45" high requires 3rd valve loader hydraulics) $ 10, $ 8.24 Loader rake, pinon (7 teeth) $ 3, $ 8.25 Loader rake, for use with quick coupler (7 teeth) $ 3, $ 9.0 PERFORMANCE OPTIONS Use this section to offer performance options. Number items starting with 9.1, 9.2, etc. Use as many numbers as you need ,000 hour preventive maintenance contract cost per hour $ 4.10 $ 9.2 One set OEM air and fluid filters 9.3 One set parts, service, and operations manual 10.0 HOURLY SHOP LABOR RATE: $ (Installation services may be requested on an as needed basis) 11.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $ EXTENDED WARRANTY OPTIONS Use this section to offer performance/warranty options, number these items starting with 10.1, 10.2, etc. (Specify years, miles or hours extended term covers.) month/5000 hour powertrain $ $ month/5000 hour powertrain $ $ month/5000 hour powertrain $ $ month/6000 hour powertrain $ $ month/7000 hour powertrain $ $ month/5000 hour powertrain $ $ month/6000 hour powertrain $ $ month/7000 hour powertrain $ $ month/5000 hour powertrain $ $ month/6000 hour powertrain $ $ month/7000 hour powertrain $ $ month/5000 hour powertrain $ $ month/6000 hour powertrain $ $ month/7000 hour powertrain $ 1, $ month/5000 hour powertrain + hydraulics $ $ month/5000 hour powertrain + hydraulics $ 1, $ month/5000 hour powertrain + hydraulics $ 1, $ month/6000 hour powertrain + hydraulics $ 1, $ month/7000 hour powertrain + hydraulics $ 1, $ month/5000 hour powertrain + hydraulics $ 1, $ month/6000 hour powertrain + hydraulics $ 2, $

7 Seq. # month/7000 hour powertrain + hydraulics $ 2, $ month/5000 hour powertrain + hydraulics $ 2, $ month/6000 hour powertrain + hydraulics $ 2, $ month/7000 hour powertrain + hydraulics $ 2, $ month/5000 hour powertrain + hydraulics $ 3, $ month/6000 hour powertrain + hydraulics $ 3, $ month/7000 hour powertrain + hydraulics $ 3, $ month/5000 hour premier $ 1, $ month/5000 hour premier $ 2, $ month/5000 hour premier $ 3, $ month/6000 hour premier $ 3, $ month/5000 hour premier $ 4, $ month/6000 hour premier $ 5, $ month/7500 hour premier $ 5, $ month/5000 hour premier $ 6, $ month/6000 hour premier $ 7, $ month/7500 hour premier $ 8, $ month/5000 hour premier $ 8, $ month/6000 hour premier $ 10, $ month/7500 hour premier $ 11, $ $ deductible per occurrence after 1st year on premier warranties. Excludes wear items, tires, cutting edges, lights, brakes, batteries, and non Cat attachments. Excludes wear items, tires, cutting edges, lights, brakes, batteries, and noncat attachments. $ $ 13.0 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: Weekly Rental Rate: $ N/A $ Monthly Rental Rate: $ 2, $ Percent (%) of Rental Fee applied to purchase price: 100% If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: Prime + 3% 14.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price. $11.00 $ 15.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS N/A AND ACCESSORIES (See Special Terms and Conditions) Price List Date and Number 16.0 DELIVERY CHARGES SEE SPECIAL TERMS AND CONDITIONS DELIVERY STARTING POINT City, State, Zip NO FLAT RATE ALLOWED Nearest Ziegler Facility PRICE PER LOADED MILE: $4.50 per mile ($350 minimum)