Spec # Information Requested Answer

Transcription

1 Price quote for: Engine Driven Brush Chipper File: C796- Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Address: Tri-State Bobcat, Inc Nick Kentros 71 Minnesota Ave Little Canada, MN Spec # Information Requested Answer Furnish separate price quote for: Engine Driven Brush Chipper 1.0 Engine Driven Brush Chipper Make & Model Bandit 280XP HD Disc Brush Bandit Is the Engine Tier IV Compliant (Yes/No) Yes, where indicated Chipper inch capacity 18" Weight 12,500 lbs (approximate) Engine type, model, HP, etc. Perkins 1206F, 225 hp Fuel tank size 60 gallons Battery size (CCA) 1400 CCA Instrumentation Down, voltage, amp, temp gauges Trailer tires (4) 235/85R 16" Trailer suspension type & capacity Tandem 7000 pound Torflex EZ lube axles Trailer Brakes Electric Trailer hitch type 2 1/2" Pintle Feed table length 66" Distance from feed roller to ground 88" Feed rate 100 FPM Feed roller size and configuration (2) 20" wide x 10-5/8" diameter, horizontal Chipper cutting wheel size 55" diameter x 2" thick Number of chipper knives 6 Knife description information (4) 1/2" thick x 4-1/2" wide x 7-1/4" long (2) 1/2" thick x 4-1/2" wide x 5-1/8" long Height of discharge chute 9' 6" Chute rotation Manual 345 degree w/12" adj. chip deflector Hydraulic tank capacity 32 gallons

2 Warranty 1 year or 2000 hrs plus 5 year Bandit manufactured related to disc, drum & slide box components PRICE: $72,749.10

3 VENDOR NAME: TRI-STATE BOBCAT, INC MAKE AND MODEL OFFERED: BANDIT 280XP HD Spec # Description Qty Price Subtotal 2.0 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with 2.1, 2.2, etc., until you have listed all engine options. Use as many numbers as you need. 2.1 Caterpillar C7.1L, 225 horsepower engine without clutch - Tier 4 FINAL (Includes Bandit control system w/ fuel saver and reversing auto feed. Also includes 3 year / 3,500 hour engine warranty) (Track and loader units only) 1 $ $ Caterpillar C7.1L, 225 horsepower engine with over center style clutch - Tier 4 FINAL (Includes pre cleaner, fuel saver, Bandit control system which also includes reversing auto feed) 1 $ 1, $ 1, Perkins 1206F, 225 horsepower engine with over center clutch - Tier 4 FINAL (Includes pre cleaner, Fuel Saver, Bandit control system and reversing auto feed. Also includes 3 year / 3,500 engine warranty) 1 $ $ John Deere 6068HFC08, 200 horsepower engine with over center style clutch - Tier 4 FINAL (Includes Bandit control panel w/ fuel saver along with reversing auto feed and 5 year / 5,000 hour warranty) 1 $ 8, $ 8, John Deere 6068HFC09, 300 horsepower engine with over center style clutch - Tier 4 FINAL (Includes Bandit control panel, and 5 year / 5,000 hour engine warranty) 1 $ 14, $ 14, Standard manual clutch is included with engine 1 $ - $ WPT double plate clutch with high drives 1 $ 7, $ 7, Standard frame and drive system 1 $ - $ Larger base and drive system for horsepower options 250 and above 1 $ 1, $ 1, Lockable steel battery box with (1) 1,400 CCA Interstate battery 1 $ - $ Battery Disconnect Switch 1 $ $ Reversing Auto Feed with digital tach/hour meter (Units with heavy-duty or super-sized feed system) 1 $ 1, $ 1, Bolt-on shut-off switch for engine shut-down located on both sides of infeed hopper 1 $ $ Shut- off valve for fuel tank 1 $ $ Mesh strainer in hydraulic tank filler opening 1 $ $ Mesh strainer in fuel tank filler opening 1 $ $ TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, number these items 3.0 starting with 3.1, 3.2, etc. 3.1 Tandem 8,000 pound Torflex EZ lube axles with electric brakes 1 $ 1, $ 1, Tandem 10,000 pound Torflex axles with electric brakes 1 $ 2, $ 2, (4) 235/75R 17.5" tires mounted on 8-bolt heavy-duty gray rims (Tandem 8,000 pound axles on up) 1 $ 1, $ 1, (4) 235/75R 17.5" tires mounted on 8-bolt aluminum rims (Tandem 8,000 pound axles on up) 1 $ 1, $ 1, Aluminum bolt on tandem axle fenders 1 $ $ " Buyer's Product pintle hitch 1 $ $ " pintle hitch with Model 20 actuator for hydraulic brake axles (18" shorter tongue) 1 $ $ Bolt on spare tire mount 1 $ $ Spare tire mounted on heavy-duty gray rim (235/75R 17.5") 1 $ $ Spare tire mounted on white modular rim (235/85R 16") 1 $ $ Spare tire mounted on heavy-duty gray rim (215/75R 17.5") 1 $ $ Spare tire mounted on aluminum rim for (215/75R 17.5") 1 $ $ (2) Mud Flaps (1/4" x 12" x 18") 1 $ $ PRONG (Flat Pin/RV-Style) Male trailer plug 1 $ $ PRONG (Round Pin) Male trailer plug 1 $ $ ,000 pound capacity tongue jack with spring return pad 1 $ $ Hydraulic tongue jack w/ multiple position drop leg 1 $ 1, $ 1, " longer stationary tongue 1 $ $ Flag holder for Bolt-on fenders (includes flags) 1 $ $ Flag holder for Weld-on fenders (includes flags) 1 $ $ Dual rear manual stabilizers 1 $ $ CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc. 4.1 Super sized spring loaded slide box feed system with (2) horizontal feed wheels. Top feed wheel is chain driven and is 15 3/4" diameter x 32" wide, and bottom feed wheel is 10 5/8" diameter x 32" wide. 1 $ 1, $ 1, Model 75 back hoe loader with swing-out operator's console, joystick controls, 57 gallon fuel and hydraulic tanks, and model 1850 tapered infeed hopper with 30" weld on tray. (Must select tandem 10,000 pound axle and (4) 235/75R 17.5" tire options.) 1 $ 25, $ 25, Model 75 back hoe loader controlled via wireless radio remote with tether back up. 1 $ 28, $ 28, Feed Wheel Engage (tethered version) for RIGHT side of machine only (Features 1 mechanical over hydraulic pedal that will allow for the activation of the feed wheels once pressure is placed on it). 1 $ 1, $ 1, Optional hydraulic bottom bump bar for infeed tray with override buttons on each side of infeed (painted red) (can be used to halt the forward motion of the feed wheels) 1 $ 1, $ 1, /2" high x 64" wide tapered heavy-duty infeed with weld on pan and infeed deflectors 1 $ $ Radio remote control with tether back-up (Controls: feed forward / reverse, yoke up / down, discharge swivel, discharge flipper up/ down, winch, throttle and engine e-stop) (Must select hydraulic swivel discharge w/ flipper and hydraulic winch options) 1 $ 6, $ 6, Radio remote control with tether back-up (Controls: feed forward / reverse, yoke up / down, discharge swivel, discharge flipper up/ down, throttle and engine e-stop) (Must select hydraulic swivel discharge w/ flipper) 1 $ 6, $ 6, Radio remote control with tether back-up (Controls: feed forward / reverse, yoke up / down, throttle and engine e-stop) 1 $ 5, $ 5, Clear Infeed Curtain â 64â Infeed 1 $ $ degree hydraulic controlled swivel discharge chute with manual 12" chip deflector 1 $ $ degree hydraulic controlled swivel discharge with hydraulic controlled 12" chip deflector 1 $ 1, $ 1, Special over the top discharge (Folds back hydraulically for transport. Also includes hydraulic swivel and flipper) 1 $ 9, $ 9, Stops on discharge degree turn. 1 $ $ Special designed replaceable discharge elbow 1 $ $ DELETE standard hand crank height and swivel discharge (to be manual swivel and non-height adjustable) 1 $ (533.00) $ (533.00) 5.0 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic wench, etc. 5.1 Dinamic winch with line docking station with electronic joystick feed assist (Includes 5/16" diameter x 200' Samson Amsteel blue rope with HD thimble installed) 1 $ 4, $ 4, Hydraulic flow control for feed wheel rate adjustment 1 $ $

4 5.3 Hydraulic oil cooler 1 $ $ Pressure Check Gauge 1 $ $ Dual rear hydraulic stabilizers 1 $ 1, $ 1, OTHER OPTIONS: Use this section to offer other options 6.1 Standard Imron Industrial Urethane Bandit Yellow (For Whole Tree Chippers/Beast please specify Chipper Guard paint color or Bolt on parts color) 1 $ - $ Standard Imron Industrial Urethane White (For Whole Tree Chippers/Beast please specify Chipper Guard paint color or Bolt on parts color) 1 $ - $ Standard Imron Industrial Urethane Alert Orange (For Whole Tree Chippers/Beast please specify Chipper Guard paint color or Bolt on parts color) 1 $ - $ Standard Imron Industrial Urethane Cat. Yellow (For Whole Tree Chippers/Beast please specify Chipper Guard paint color or Bolt on parts color) 1 $ - $ Standard Imron Industrial Urethane Green (For Whole Tree Chippers/Beast please specify Chipper Guard paint color or Bolt on parts color) 1 $ - $ Standard Imron Industrial Urethane Black (For Whole Tree Chippers/Beast please specify Chipper Guard paint color or Bolt on parts color) 1 $ - $ Special Imron Industrial Paint (please specify paint color and number) (Requires specification) 1 $ $ Special Imron 5000 Paint (please specify paint color and number) (Requires specification) 1 $ $ Additional dual-edge knife 1 $ $ Additional dual-edge knife 1 $ $ Debris resistant bearing package in lieu of standard 1 $ $ Knife saver kit (includes sharpener, file, safety gloves, and carrying case) 1 $ $ Replaceable knife pocket wear plate - 2 pocket disc 1 $ 1, $ 1, Disc chipper tool kit to change knives for 5/8" bolts 1 $ $ Model 280 wear kit (Includes 3 sets of knives, bolts, and nuts/washers, along with 1 anvil with hardware, knife sharpener, and anvil gauge) 1 $ $ Tool kit for Handfed Chippers Includes: - Screwdriver set (4 pc) - ½â Drive Torque wrench ( ft) - ½â Drive Socket set w/ratchet (18 pc) - Crescent wrench - Open end wrench set (14 pc) - Balldriver tool set (13 pc) - ½â Drive slott 1 $ $ Aluminum Bolt On Chock Holders (Does not include chocks) 1 $ $ Non skid coating on tongue and all step on areas 1 $ $ Extra chipper operators manual (standard version) 1 $ $ Extra engine operators manual 1 $ $ Wilton 5 1/2" swivel steel vice, w/ mount 1 $ $ Hydraulic Last Chance Cables 1 $ $ /2 pound fire extinguisher with mount 1 $ $ Spring loaded cleanout door (in lieu of standard) 1 $ $ Combination English / Canadian French decals (Note: these would be the safety decals only) 1 $ $ " x 6 1/2" inspection window on belt shield 1 $ $ Weld on hoop style cone holder 1 $ $ Bolt-on hoop style cone holder 1 $ $ Bolt-on Double Cone Holder 1 $ $ Grease gun (10,000 PSI) 1 $ $ Dual Wig Wag LED Strobe Lights 1 $ $ Steel Weld On Chock Holders 1 $ $ Rubber Wheel Chocks (2) 1 $ $ EXTENDED WARRANTY OPTIONS 7.1 Price: 8.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED DELIVERY STARTING POINT - City, State, Zip PRICE PER LOADED MILE: $ MINIMUM DELIVERY CHARGE (if applicable) $ 9.0 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: $ Weekly Rental Rate: $ Monthly Rental Rate: $ Percent (%) of Rental Fee applied to purchase price: % If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $

5 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES 10.0 (See Special Terms and Conditions) Price List Date and Number: 12/15/2017 % Discount