Model FD Static Curtain Fire Damper 1-½ or 3 Hour, UL555 Listed
|
|
- Lenard Gardner
- 5 years ago
- Views:
Transcription
1 Tag: Project: Engineer: Contractor: Location: ate: pplication: rchitect: Submitted by: The NC model F fire damper utilizes a curtain style blade to prevent the spread of fire through a penetration in a fire rated barrier made by an VC duct or transfer. The F can be installed vertically (F-V) or horizontally (F-) and is meant for static VC systems (fans turn off in a fire) only. Standard Construction: Frame Material lade Material and Type Standard 22 Gauge Galvanized Roll-formed Steel 22 Gauge Galvanized Roll-formed Steel Optional LISTINGS: UL 555 Listing: R8218 CSFM Listing: :0102 New York ME Listing: M STNRS MET: NFP Standards: 80, 90, 92, 92 and 101 uilding Code Standard: ICC International uilding Code F 1-½ or 3 our, UL555 Listed R8218 Frame epth 3-11/16 2-3/18 (55) [see F-SL] 1-½ (38) [see F-V-SL] imensions ctual - 1/4 (6) ctual Closure Spring Stainless Steel Fusible Link 165 (74 C) 212 (100 C) Mounting Vertical [F-V] orizontal [F-] UL our Rating 1-1/2 our 3 our Optional Construction: 3-our Rating 212 Fusible Link Factory Supplied Welded Sleeve: Length: 12 (305) 16 (406) 24 (610) Other: Gauge: 20 (1.0) 18 (1.3) 16 (1.6) 14 (2.0) 10 (3.5) Location in Sleeve: Standard Offset: inches Factory Supplied Integral Sleeve (20 gauge only): Length: 12 (305) 14 (356) 16 (406) Flanged Sleeve (requires factory welded sleeve): 3/4 (19) 1 Framed Retaining ngles - 16 ga. x 1½ x 1½ (1.6x38x38) Single Side ual Side Sealed Sleeve (Factory welded sleeve only) Fully Welded Other Options: Fully Caulked - ccess oors (see ) - ynamic models (see F) - Single lade (high free area) models (see F-RS) - Multi-lade models (see F-M) - Slimline and Ultra Slimline models (see s F-SL and F-V-U-SL) - Out-of-wall models (see F-OW) - True Round models (see F-R) uct eight* F-V uct Width* *amper width and height will be undercut 1/4 (6). uct eight* F- uct Width* 1
2 MPER STYLES & SIZES - F Type Frame and blade stack in air stream pproximately 75-85% Free rea F- Minimum & Maximum Sizes: Type Minimum Size Max. Single Section Max. Multi-Section F-V 60x60 (1524x1524) 48x48 (1219x1219) 120x120 (3048x3048) 80x40 (2032x1016) Type without Sleeve F- 4x4 (102x102) 48x48 (1219x1219) 40x40 (1016x1016) 120x40 (3048x1016) or 96x48 (2438x1219) imension = uct Width imension = uct eight 80x40 (2032x1016) Type with Welded Sleeve 12 (305) min. Type with Integral Sleeve¹ Type lade stack out of airstream pproximately 80-90% Free rea F- Minimum & Maximum Sizes: 3 4 " X Type F-V 60x55 (1524x1397) 48x43 (1219x1092) 120x115 (3048x2921) 80x36 (2032x914) Type without Sleeve F- 4x3 (102x76) 48x43 (1219x1092) 40x36 (1016x914) 120x36 (3048x914) or 96x43 (2438x1092) 80x36 (2032x914) imension = uct Width imension = uct eight X imension = eight of lade Stack imension = Overall amper eight (+X) Type with Welded Sleeve 12 (305) Min. Type with Integral Sleeve¹ 2
3 MPER STYLES & SIZES - F Type C Square or Rectangular Transition Frame and blade stack out of airstream pproximately % Free rea F-C Minimum & Maximum Sizes: 34 " X +1 " Rect./ Square Transition Type C F-VC F-C 3x3 (76x76) 59x54 (1499x1372) 47x42 (1194x1067) 47x42 (1194x1067) 39x35 (991x889) 119x114 (3023x2896) 119x35 (3023x889) or 90x42 (2286x1067) imension = uct Width imension = uct eight X imension = eight of lade Stack imension = Overall amper eight (+X+1 ) 79x35 (2007x889) 79x35 (2007x889) + Type C with Welded Sleeve Type C without Sleeve 1 1 " (305) min. Type C with Integral Sleeve¹ Type C Oval Transition Frame and blade stack out of airstream pproximately % Free rea F-C-O Minimum & Maximum Sizes: Oval Transition Type C F-VC-O F-C-O 3x3 (76x76) 59x54 (1499x1372) 47x42 (1194x1067) 47x42 (1194x1067) 39x35 (991x889) 119x114 (3023x2896) 119x35 (3023x889) or 90x42 (2286x1067) 79x35 (2007x889) 79x35 (2007x889) 34 " X +1 + Type C-O without Sleeve 2" (51) + imension = uct Width imension = uct eight X imension = eight of lade Stack imension = Overall amper eight (+X+1 ) Type C-O with Welded Sleeve 12 (305) Min. Type C-O with Integral Sleeve¹ 3
4 MPER STYLES & SIZES - F Type C Round Transition Frame and blade stack out of airstream pproximately % Free rea F-RC Minimum & Maximum Sizes: Round Transition Type C F-RVC F-RC 3 ia. (76) 54 ia. (1372) 42 ia. (1067) 42 ia. (1067) 35 ia. (889) 114 ia. (2896) 35 ia. 42 ia. (889) (1067) 34 " X +1 Type RC without Sleeve + 2" (51) +1 X imension = eight of lade Stack imension = Overall amper eight (+X+1 ) imension = iameter 6" (152) Min. 12" (305) Min. Type RC with Welded Sleeve Type RC with Integral Sleeve¹ Type Round Transition lade stack in the airstream pproximately 75-85% Free rea F-R Minimum & Maximum Sizes: Round Transition Type F-VR F-R 4 ia. (102) 58 ia. (1473) 46 ia. (1168) 46 ia. (1168) 38 ia. (965) 118 ia. (2997) 46 ia. (1168) 38 ia. (965) 38 ia. (965) 34 " Type R without Sleeve +2 (51) +2" 2" (51) +2 (51) X imension = eight of lade Stack imension = Overall amper eight (+2 ) imension = iameter Type R with Welded Sleeve 12 (305) Min. Type R with Integral Sleeve¹ 4
5 IMENSIONL INFORMTION - F (for Type ) Type Fire amper uct eight () Type amper eight () Inches Inches ¾ " "
6 IMENSIONL INFORMTION (Cont.) - F (for Type C) Type C Fire amper +1 " uct eight () Inches Type RC, C, C-O amper eight () Inches " 4 2" 2"
7 MULTIPLE SECTION INFORMTION - F Multiple section damper assemblies are shipped in individual sections from the factory unless a factory supplied and installed sleeve is required. When a multiple section damper is ordered with a sleeve, it is usually shipped as a complete assembly. The following drawings are of different maximum size multiple section F models and are for reference purposes (not all options are shown). Type Multi-Section ssembly F-V Shown (max size): 1-1/2 our Vertical Type Multi-Section ssembly F- Shown (max size): 1-1/2 and 3 our orizontal 120" Max. O.. 60" Max. Single Section 120" Max. Multisection O.. 40" Max. O.. 60" Max. Single Section Type C Multi-Section ssembly F-C Shown (max. size): 1-1/2 our orizontal 120" Max. O.. Type C Multi-Section ssembly F-RVC Shown (max. size): 1-1/2 our Vertical 120" Max. Multisection 114" ø Round Inlet 4" Cap 60" Max. Single Section 36" Max. Single & Multisection 40" Max. O.. 119" Max. Multisection 120" Max. O.. 40" Max. Single Section 60" Max. Single Section 120" Max. Multisectio 4" Cap 35" Max. Multisection 40" Max. O.. 1. These diagrams are for reference purposes only 2. Not all F options are shown 7
8 SLEEVE IMENSIONL T - F elow are diagrams showing the location of the Type, and C fire dampers in welded factory installed sleeve. Integral sleeves (where the sleeve acts as the frame of the damper) are also available. Sleeve TYPE Sleeve Sleeve imensions = Overall damper height W = Overall damper width (always the length of the blades) = uct width = uct height O = The offset from one end of the sleeve to the middle of the damper frame (can be altered as a construction option) L = Overall length of sleeve TYPE amper Sleeve TYPE C amper amper 1-½" O amper Location L Overall O amper Location L Overall O amper Location L Overall W OPTIONL INTEGRL SLEEVE INFORMTION NC offers the cost and time saving option of having the sleeve be integral to the fire damper. It is offered on any of the fire damper types mentioned in this submittal (, R,, C, R(V/)C and C-O). On an integral sleeve fire damper, the sleeve acts as both the sleeve and the frame. Integral sleeve fire dampers are available in 20 gauge galvanized steel only and in lengths of 12" (305), 14" (356) or 16" (406). Integral sleeve fire dampers are less expensive than factory welded sleeves. TYPE TYPE R +2 (51) TYPE 8 Integral sleeve dampers are restricted to single sections. Refer to the max single section sizes within this submittal for those specific sizes TYPE C TYPE R(V/)C TYPE C-O +
Model FDD Dynamic Curtain Fire Damper 1-½ or 3 Hour, UL555 Listed
Tag: Project: Engineer: Contractor: Location: ate: pplication: rchitect: Submitted by: The NC model F fire damper utilizes a curtain style blade to prevent the spread of fire through a penetration in a
More informationModel DFD-150. Dynamic Rated Fire Damper 11/2 Hour Fire Resistance Rating. Application. Ratings. Optional Features
Application Model is approved for use in walls, floors, and partitions with fire resistance ratings less than 3 hours. This model carries a 1 1 2 hour UL fire damper label. UL555 classifies dynamic rated
More informationModel FD-350. Static Rated Fire Dampers 3 Hour Fire Resistance Rating. Application. Ratings. Construction Standard Optional.
Application Model FD-50 is a static rated fire damper approved for use in walls and partitions with fire resistance ratings of hours or more. This model carries a hour UL fire damper label. UL555 classifies
More informationFusible Link (replaceable) Horizontal Mount
Application Model SSFD-50 is a static rated fire damper approved for use in walls and partitions with fire resistance ratings less than hours. This model carries a 2 hour UL fire damper label. UL555 classifies
More informationModel DFD-150. Dynamic Rated Fire Damper 11/2 Hour Fire Resistance Rating. Application. Ratings. Optional Features
Application Model is approved for use in walls, floors, and partitions with fire resistance ratings less than 3 hours. This model carries a 1 1 2 hour UL fire damper label. UL555 classifies dynamic rated
More informationFire Dampers Catalogue
Fire s Catalogue DUCT VENTILATION AIR CONDITIONING Co. (W.L.L.) CRFD - Type A, B, CR & CO Rectangular, Round & Flat Oval UL 555 Classified 2013 For Use in Static & Dynamic Systems 3 Hour Rating Made in
More informationCURTAIN TYPE FIRE DAMPER
MODEL: IBD-2 / IBD-2H STANDARD CONSTRUCTION FIRE RATING UL 555 1-1/2 hours UL classification damper SS: 4 hours rating classification damper NOTES Damper s dimension is usually about 10 mm smaller than
More informationModel DFD-350. Dynamic Rated Fire Damper 3 Hour Fire Resistance Rating. Application. Ratings. Optional Features
Application Model is approved for use in walls, floors, and partitions with fire resistance ratings of hours or more. This model carries a hour UL fire damper label. UL 555 classifies dynamic rated fire
More informationFusible Link (replaceable) Horizontal Mount
Application Model FD-50 is a static rated fire damper approved for use in walls and partitions with fire resistance ratings less than hours. This model carries a /2 hour UL fire damper label. UL 555 classifies
More informationFSD60, FSD60LP COMBINATION FIRE AND SMOKE DAMPER 1 1 /2 HOUR UL555 RATED, UL555S LEAKAGE CLASS 1
3900 Dr. Greaves Rd. Kansas City, MO 64030 (816) 761-7476 FX (816) 765-8955 FSD60, FSD60LP COMINTION FIRE ND SMOKE DMPER 1 1 /2 HOUR UL555 RTED, UL555S LEKGE CLSS 1 PPLICTION Ruskin FSD60 Series ultra
More informationFSD36, FSD36LP COMBINATION FIRE AND SMOKE DAMPER
3900 Dr. Greaves Rd. Kansas City, MO 64030 (816) 761-7476 FX (816) 765-8955 FSD36, FSD36LP COMINTION FIRE ND SMOKE DMPER 1 1 /2 HOUR UL555 RTED, UL555S LEKGE CLSS 2 PPLICTION Ruskin FSD36 Series low leakage
More informationCURTAIN FIRE DAMPERS GENERAL PRODUCT OVERVIEW
CURTAIN FIRE AMPERS GENERAL PRUCT VERVIEW Since 1971, Nailor Industries, Inc. fire dampers have been a critical component of HVAC systems in commercial and industrial buildings. As an industry leader,
More informationtable of contents PRODUCT SUMMARY 2
P R O D U C T C A T A L O G introduction Aire Technologies, Inc. is proud to present our line of air management and life safety products for integration into your HVAC system design, fabrication, or installation.
More informationModel DFD-230 Multi-Blade Fire Damper Steel 3V Blades UL555 3 Hour Fire Resistance Rating
Application Model is a multi-blade fire damper with 3V style blades. The has been qualified to 4000 fpm (20.3 m/s) and 10 in. wg (2.5 kpa) for dynamic closure in emergency fire situations. Model may be
More informationFSD60, FSD60LP CoMBINAtIoN FIRe AND SMoKe DAMPeR
3900 Dr. Greaves Rd. Kansas City, MO 64030 (816) 761-7476 FAX (816) 765-8955 FSD60, FSD60LP CoMINAtIoN FIRe AND SMoKe DAMPeR 1 1 /2 HoUR UL555 RAteD, UL555S LeAKAge CLASS 1 APPLICAtIoN Ruskin FSD60 Series
More informationMODEL TDB TUBEAXIAL INLINE BELT DRIVEN DUCT FAN
TUBEAXIAL INLINE BELT RIVEN UCT FAN Model Features Rated up to 75,490 CFM in static pressure applications up to 1-1/2 w.g. 12 sizes ranging from 12 to 60 propeller diameters Motor drives are located outside
More informationModel CFSD-211. Corridor Ceiling FIRE SMOKE DAMPER Steel 3V Blades UL 555S Leakage Class I
Application and Design Model is a combination fire smoke damper that is UL classified to protect corridor ceiling penetrations as required by the Uniform Building Code. This model s operational ratings
More informationFSD36, FSD36LP COMBINATION FIRE AND SMOKE DAMPER 1 1 /2 HOUR UL555 RATED, UL555S LEAKAGE CLASS 2
3900 Dr. Greaves Rd. Kansas City, MO 64030 (816) 761-7476 FAX (816) 765-8955 FSD36, FSD36LP COMINATION FIRE AND SMOKE DAMPER 1 1 /2 HOUR UL555 RATED, UL555S LEAKAGE CLASS 2 APPLICATION Ruskin FSD36 Series
More informationOPTIONS BLANK = No Options B = BACnet MS/TP D = Internal Transmitter Display (Ref Note 4)
MOEL COE UCT SHAPE = Round = Rectangular = Flat Oval PROBE MATERIAL = Aluminum/ABS = CPVC & ABS = 0SS = High Temp SS (50 F / C Max) PROBE QUANTITY = = s = s = s SENSORS PER PROBE = Sensor per = Sensors
More information5/8 (16) DIA. MOUNTING HOLES TYP [4] PLACES. SEE NOTE #3 ACCESS PANEL BOTH SIDES 2 1/2 (64) Unit Size Fan Size L W H C D E F G J (508) (406) 25 (635)
LOER OILS, orizontal and ertical imensional Information TOP N SIE IES (RR 3) LOER OILS 9/ (4) I. MOUNTING OLES TYP [4] PLES. ITOUT SE RIL NOTES:. Provide sufficient clearance to permit access to controls
More informationModel ABV Pressure Independent Automatic Balancing Valve. Application: Standard Construction: Performance: Configurations Available:
Model ABV Tag: Project: Location: Date: Engineer: Contractor: Architect: Submitted by: Application: The ABV Automatic maintains a constant airflow volume in HVAC applications. The highly engineered damper
More informationStandard Installation Fire Damper Models: 319, 319(SS), D39
Standard Installation Fire Damper Models: 319, 319(SS), D39 Page 1 or 6 APPLICATION This fi re damper is intended to restrict the passage of fl ame. The standard installation requires that the damper is
More informationWe make dampers easy for you!
FIRE DAMPERS & CEILING RADIATION DAMPERS We make dampers easy for you! In over 50 years of business, we ve learned how to make business easy for our customers, and dampers are no exception. We ve honed
More informationAxial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1.
xial-flow Fan FC Construction xial fan designed for installation in a ducted system. Casing of rolled and electro-welded steel sheet, powder coated RL5. Impeller in polypropylene. Casing in acid-proof
More informationInstallation, Operation and Maintenance Instructions
Document Number 474094 CRD-1WT Ceiling Radiation for Wood Truss Application Installation, Operation and Maintenance Instructions Receiving and Handling Upon receiving dampers, check for both obvious and
More informationSMOKE DAMPERS SMOKE DAMPERS SMOKE DAMPERS
SMOKE DAMPERS 96 97 SD SERIES SD for Use in Dynamic Systems Types Galvanized Steel Construction as Standard.. Sleeve Type, Model: SD - 0-00. Circular Type, Model: SD - 50-00. Oval Type, Model: SD - 60-00
More informationPRODUCTS BULLETIN PRODUCTS CATALOGUE
FIRE DAMPERS WE SAVE LIVES PRODUCTS BULLETIN PRODUCTS CATALOGUE Dubai Head Office: Tel: +971 4 706 97777 Fax: +971 4 706 9787 Abu Dhabi Branch: Tel: +971 2 645 0107 Fax: +971 2 645 0167 Email: beta@betag.com
More informationRegisters for spiral ducts
Registers for spiral ducts RGS-3 5 The RGS-3 is a supply/return register with adjustable double deflection blades and a volume damper designed specifically for direct mounting on a spiral duct. The use
More informationFAN POWERED TERMINAL UNITS
Benefits: Fan powered terminals are typically used for heating and cooling of perimeter zones. Operating cost savings can be achieved through the use of waste heat recovery from the ceiling plenum and
More informationFIXED BLADE LOUVRE FACED CEILING DIFFUSER
IFFUSERSFixed lade Louvre Faced FIXE LE LOUVRE FCE CEILING IFFUSER range of fixed blade ceiling diffusers with a 2 position, removable core for use in heating / cooling applications where the mounting
More informationFire, Smoke, and Combination Fire Smoke Dampers
Fire, Smoke, and Combination Fire Smoke Dampers Installation/Configuration Fire Dampers Smoke Dampers Agenda Combination Fire/Smoke Dampers Operational Test/Inspection Periodic Test/Maintenance Damper
More informationCEILING VENTILATOR ACCESSORIES 6393 Powers Avenue Jacksonville, Florida P: / F:
EILING VENTILTOR ESSORIES IN-LINE PTOR KITS FOR FF UNITS 961L IN-LINE PTOR KIT Fits FF100 & FF150 For 6" Round uct Intake 982L IN-LINE PTOR KIT Fits FF400, FF500 & FF700 4 1/2" x 18 1/2" uct Intake 981L
More informationATU PRODUCT CATALOG AIR TERMINAL UNITS FCI-600 CONSTANT VOLUME FAN TERMINAL UNIT Metal Industries, Inc.
ATU PRODUCT CATALOG AIR TERMINAL UNITS FCI-600 CONSTANT VOLUME FAN TERMINAL UNIT 15 Metal Industries, Inc. BENEFITS: Fan powered terminals are typically used for heating and cooling of perimeter zones.
More informationSmoke Dampers. Installation Instructions
Smoke Dampers Installation Instructions Installation Details 1. Dampers should be installed to provide proper operation and performance. They should be installed to permit them to maintain their shape
More informationMODEL 151B FIRE DAMPER
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Stock ID: IOM-151B January, 2003 2003 Miami Tech Inc., Inc. Miami, FL Miami Tech T Inc. MODEL 151B FIRE INSTALLATION INSTRUCTIONS The City of New York 909-89-SM California
More informationFAN POWERED TERMINAL UNITS
Benefits: Fan powered terminals are typically used for heating and cooling of perimeter zones. Operating cost savings can be achieved through the use of waste heat recovery from the ceiling plenum and
More informationSMD-201M. Application. Modulating Smoke Dampers Steel 3V Blades UL 555S Leakage Class I. Ratings. Operational Rating. Size Limitations.
Application Model is a leakage rated modulating smoke damper with 3V style blades. The has been qualified to 2,000 fpm (10.2 m/s) and 6 in. wg (1.5 kpa) for operational closure in emergency smoke control
More informationNobody delivers dampers and louvers faster!
USKIN EXPRESS Nobody delivers dampers and louvers faster! R ISO9001 CERTIFIED www.ruskin.com DAMPERS AND LOUVERS Specified by Many Equaled by None We re there when you need us. Guaranteed! At Ruskin, we
More informationInstallation, Operation and Maintenance Manual
Installation, Operation and Maintenance Manual Document 483514 SMOKE DAMPERS SMD-XXX and SMDR-XXX Series Leakage Rated Smoke Dampers Vertical and Horizontal Mount Please read and save these instructions
More informationVD-1600 Series Volume Control Dampers
VD-1600 Series Volume Control Dampers Product Bulletin VD-1600 Code No. LIT-1201735 Issued April 2017 Refer to the QuickLIT website for the most up-to-date version of this document. Since 1885, Johnson
More informationOSU PROJECT NO PAGE 1 02 NOV 2006 SECTION DUCTWORK ACCESSORIES
OSU PROJECT NO. 30-04-15 PAGE 1 PART 1 GENERAL 1.1 WORK INCLUDED A. Medium and low pressure duct accessories, sealants and tapes, flexible connectors, fire dampers, smoke dampers, combination smoke and
More informationSMOKE DAMPER - CLASS F MODEL BMSD
UL CLASSIFIED DAMPERS SMOKE DAMPER - BMSD SERIES STANDARD CONSTRUCTION Standards: Designed and tested in accordance with UL555S. Meets NFPA 90A and SMACNA requirements for fire & smoke dampers. Application:
More informationMotorized Fire Dampers
Model : OMFD-611 (Fusible link and spring return actuator) GI steel sheet construction In accordance with UL555 & UL555S suitable for installation in walls and partitions having rating 2 Hrs. Static and
More informationModel FSD-211. Combination FIRE SMOKE DAMPERS Steel 3-V Blades UL 555S Leakage Class I UL Hour Fire Resistance Rating
R APPLICATION Model FSD-211 is a combination fire smoke damper with 3V style blades. The FSD-211 has been qualified to 2000 fpm (10.2 m/s) and 6 in. wg (1.5 kpa) for operation and dynamic closure in emergency
More informationSINGLE DUCT TERMINAL UNITS 30X/HQX SERIES
30X/HQX SERIES 30X SERIES EXHUST 30HQX SERIES EXHUST HOSPITL GRDE QUIET TYPE WITH DISSIPTIVE SILENCER PRODUCT OVERVIEW Nailor Single Duct Exhaust Terminal Units are used to modulate exhaust flow from an
More informationModel FSD-211. Application. Combination Fire Smoke Damper Steel 3V Blades UL 555S Leakage Class I UL /2 Hour Fire Resistance Rating.
Application Model is a combination fire smoke damper with 3V style blades. This model is designed for operation and dynamic closure in emergency fire smoke situations. It is rated for airflow and leakage
More informationBC 03. Fire Dampers FD-GB-30-AS LISTED
BC 03 FD-GB-30-AS LIFE SAFETY DAMPERS FD-GB-20/21/30/31 Fire Damper Fire Rating : 1-1/2 Hrs /3 Hrs. Fire Damper Application are required by the International Uniform Building Code to maintain the required
More informationInline & Sidewall Exhaust Fans
F, F 28 Inline & Sidewall xhaust Fans est vailable 3 ays F UL/cUL 705 Power Ventilators 40001 - F with TF motors 40001 - F with TF motors F F is M Licensed for ir Performance F is M Licensed for Sound
More informationModel SSFSD-211. Combination Fire Smoke Damper 304 Stainless Steel 3V Blades UL 555S Leakage Class I UL Hour Fire Resistance Rating
R Model Application Model is a 304SS combination fire smoke damper with 3V style blades. The is qualified to 2,000 fpm (10.2 m/s) and 6 in. wg (1.5 kpa). This damper may be installed vertically (with blades
More informationCEILING DAMPERS GENERAL PRODUCT OVERVIEW CEILING DAMPERS MODELS 0716, , 0714 & 0722 FOR SQUARE, RECTANGULAR OR ROUND DUCTS
GENERAL PRODUCT OVERVIE Since 97, Nailor Industries has been committed to the innovation and development of life safety products such as the 0700 Series Ceiling Dampers. This commitment has helped foster
More informationCOMBINATION FIRE/SMOKE DAMPER - CLASS F MODEL BMFSD (3 HR) / MODEL BEMFSD (1½ HR)
UL CLASSIFIED DAMPERS COMBINED FIRE/SMOKE DAMPER - BMFSD SERIES STANDARD CONSTRUCTION Standards: Designed and tested in accordance with UL555 & UL555S. Meets NFPA 90A and SMACNA requirements for fire &
More informationGreenheck Product Category
reenheck Product ategory SW elt rive ackward nclined une 008 SW elt rive Utility ans reenheck s backward inclined utility fans have many advantages; higher operating efficiencies, non overloading horsepower
More informationInstallation, Operation and Maintenance Manual
Document 461338 SMOKE DAMPERS SMD-XXX, SMD-XXXEF, SMD-XXXM, SMD-XXXV, SESMD-XXX, SSSMD-XXX, SMDR-XXX, SESMDR-XXX, and SSSMDR-XXX Series Leakage Rated Smoke Dampers Vertical and Horizontal Mount Installation,
More informationModel SMD-302M. Modulating Smoke Damper. Application. Steel Airfoil Blades UL 555S Leakage Class II. Ratings. Size Limitations.
Model Application The is a leakage rated modulating smoke damper with airfoil blades for operational closure in emergency smoke control situations. This model serves the function of both a control damper
More informationSINGLE DUCT TERMINAL UNITS 3000 SERIES
000 SERIES 000 SERIES VRIBLE OR CONSTNT VOLUME PRODUCT OVERVIE Nailor 000 Series Single Duct Terminal units are simply put, versatile. hether the requirement calls for a constant or variable air volume
More informationStandard Installation Fire/Smoke Damper Models: FR1, FR2 Smoke Damper Models: SR1, SR2
Reprinted Feb 2013 APPLICATION These dynamically rated fire/smoke and smoke dampers are intended to restrict the passage of smoke. The dynamically rated fire/smoke dampers are also intended to restrict
More informationSMD-201. Application. Smoke Dampers Steel 3V Blades UL 555S Leakage Class I. Ratings. Operational Rating. Size Limitations.
Application Model is a leakage rated smoke damper with 3V style blades. The has been qualified to 2,000 fpm (10.2 m/s) and 6 in. wg (1.5 kpa) for operational closure in emergency smoke control situations.
More informationModel VCD-18. Ratings. Blade Operation. Size Limitations. Features & Options
Application and Design The series is a general purpose, low leakage control damper intended for application in low pressure and velocity systems. atings Pressure: 2 in. wg (.5 kpa) - pressure differential.
More informationModel FSD-331. Combination Fire Smoke Dampers. Application. Ratings. Features
Application Model is a high performance combination fire smoke damper with Class I leakage. High strength airfoil blades ensure the lowest resistance to airflow in HVAC systems with velocities to 4000
More informationType 12 / 13 Enclosures
Type 12 Free-Standing Enclosures ata Sheet pplication Houses electrical controls and instruments Easy access fixed or swing panels for optional equipment ual-access construction available for back-to-back
More informationMULTI-BLADE FIRE DAMPERS
MODL D1201-DOW (1 1/2 HR.) OUT OF WALL DYNAMIC FIR DAMPR AIRFOIL BLAD DUCTD BOTH SIDS D1201-DOW is an "out of wall" (vertical mount) or "out of floor" (horizontal mount) high performance dynamic fire damper
More informationFAN POWERED SERIES FCI-600 CONSTANT VOLUME FAN TERMINAL UNIT SPECIFIABLE FEATURES
FAN TERMINAL UNIT SPECIFIABLE FEATURES Galvanized steel casing, mechanically sealed for low leakage construction NEMA TYPE 1 rated hinged control enclosure with standoff to prevent penetration of casing
More informationCATALOGUE DUCTS VENTILATION ELEMENTS. and. Production and sales office : Abrahámska 183; Malá Mača SLOVAKIA
CTOGUE of UCTS VENTITION EEMENTS Production sales office : brahámska 183; 925 21 Malá Mača SOVKI Phone : +421 31 / 701 08 41 Fax : +421 31 / 784 17 48 e-mail : tzbglobal@tzbglobal.sk www.tzbglobal.sk Unified
More informationModel VCD-20 3V CONTROL DAMPER
R Application and Design The series is a ruggedly built general purpose damper for application as an automatic control or manual balancing damper. This model is intended for application in low to medium
More informationFE-1000 INSERTION TYPE AIRFLOW SENSING ELEMENT
Technical Data Sheet FE-1000 INSERTION TYPE IR SENSING ELEMENT DESCRIPTION The FE-1000 is an insertion type airflow sensing element designed for quick, easy installation through a small cutout in the existing
More informationB. Base occupied space sound level estimates on ARI 885. C. Terminal heating coils shall conform to ARI 410.
PART 1 - GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationMULTI-BLADE FIRE DAMPERS
MULTI-BLAD FIR DAMPRS MODLS 1201-MDG & 1201-MDS MULTI-BLAD MARIN FIR DAMPRS AIRFOIL BLAD LOW LAKAG Model Series 1201-MDG and 1201-MDS are Multi-Blade Low Leakage Fire Dampers for use in marine applications
More informationPositive Seal Damper Blades with Vinyl Gaskets 2.5" SERIES 3000 SIDE MOUNT - NO FLANGE ORDERING METHOD FOR BACKDRAFT & MOTORIZED BACKDRAFT DAMPERS
BACKDRAFT DAMPERS BLADE OPTION: SR: 0.016-0.020 roll formed aluminum with vinyl gasket - used with fan motors under 1 HP SE: 0.05 extruded aluminum with vinyl gasket - used with fan motors over 1 HP Positive
More informationLife Safety Dampers. Fire Combination Fire Smoke Smoke Ceiling Radiation
Life Safety Fire Combination Fire Smoke Smoke Ceiling Radiation June 2018 Table of Contents Introduction......................................... 3- Fire....................................... 5-19 Application...................................................
More informationModel LIDA. DIRECT DRIVE TUBEAXIAL FANS Model LIDA DIRECT DRIVE TUBEAXIAL FANS SECTION 12. Application. Options/Accessories
IRECT RIVE TUBEAXIAL FANS Model LIA Model LIA IRECT RIVE TUBEAXIAL FANS SECTION 12 Application Carnes Company tubeaxial fans offer one of the widest ranges of sizes, horsepower and performance in the industry.
More informationProduct Data Manual. ERV5000i/e ERV6500i/e ERV8000i/e ERV10000i/e
Product ata Manual ERV5000i/e ERV6500i/e ERV8000i/e ERV10000i/e Table of Contents Physical ata - Nomenclature Options............................................. 3 Effectiveness Performance ata.................................................
More informationMODELS FF & FFC CEILING AND INLINE/CABINET VENTILATORS
Model FF Model FFC Model ff Features Exhaust air up to 1500 CFM Forward curve centrifugal wheel for high static pressure capabilities to 1 w.g. Resilient mount, low RPM motor for quiet operation (except
More informationMODEL FF/FFC CEILING AND INLINE/CABINET VENTILATORS
MODEL FF/FFC CEILING AND INLINE/CABINET VENTILATORS APPLICATION The extremely quiet FF and FFC ventilators are used to exhaust air from a variety of commercial and institutional applications, such as restrooms,
More informationStandard Installation Combination Fire/Smoke Damper Models: FS1(SS), FS2(SS) Fire Damper Models: MD19(SS)
Standard Installation Combination Fire/Smoke Damper Models: FS1(SS), FS2(SS) Fire Damper Models: MD19(SS) Page 1 of 6 APPLICATION These dynamically rated fire/smoke and fire s are intended to restrict
More informationModel FSD-331 Combination Fire Smoke Dampers
R APPLICATION Model is a high performance combination fire smoke damper with class I leakage. High strength airfoil blades ensure the lowest resistance to airflow in HVAC systems with velocities to 4000
More informationAir Handlers Series. Direct-Fired Heating Pressurization. Dimension and Selection Guide
2000-Series ir andlers irect-ired eating Pressurization imension and Selection uide 1.800.536.3461 www.rapidengineering.com N: 100% OUTSI IR ONLY 2000-Series Selection uide IMPORTNT NOTS: ll information
More informationSmartCom 3. Cabinet Heaters. Heat Exchanger models. Cabinet Heaters. VN/VD Vertical Heaters. HN/HD Horizontal Heaters. RN/RD Downflow Heaters
Smartom 3 abinet eaters eat Exchanger models VR as and xial Oil an ired abinet eaters VN/V Vertical eaters N/ orizontal eaters RN/R ownflow eaters abinet eaters Introduction The enson range of cabinet
More informationVariable Air Volume Dampers
OVAV 2000 SERIES OPTIMA VAV DAMPERS Overview OPTIMA make Variable Air Volume (OVAV) box is a part of an Air Conditioning system. It is located inside the duct work. VAV Dampers are designed to control
More informationFAN POWERED TERMINAL UNITS
POWERE TERMINAL UNITS MOEL SERIES 134-10 FLOW CONSTANT VOLUME SQUARE ROUN NECK W/ OUTSIE INLET (OAI) SQUARE ROUN NECK 3S-OAI & 3SST-OAI SERIES SQUARE ROUN NECK MINIMUM VENTILATION 'IAQ' APPLICATIONS Models:
More informationStandard Installation Combination Fire/Smoke Damper Models: FS1, FS2, FT1, FT2, FA1, FA2, TA1, TA2, FS2C2 Fire Damper Models: MD19, MD39, MA19, MA39
Standard Installation Combination Fire/Smoke Damper Models: FS1, FS2, FT1, FT2, FA1, FA2, TA1, TA2, FS2C2 Fire Damper Models: MD19, MD39, MA19, MA39 APPLICATION These dynamically rated fire/smoke and fire
More informationMODELS HREB-C & HRED-C HOODED PROPELLER ROOF EXHAUST FANS
MODEL FEATURES Exhaust air to over 40,000 CFM up to 3/4 w.g. Belt drives permit easy performance adjustments when needed Direct drive units have low sound levels and quiet operation. Reversible blades
More informationMODEL FF/FFC CEILING AND INLINE/CABINET VENTILATORS
R MODEL FF/FFC CEILING AND INLINE/CABINET VENTILATORS APPLICATION The extremely quiet FF and FFC ventilators are used to exhaust air from a variety of commercial and institutional applications, such as
More informationW-VI Series - Internal Make-up Air Wall Canopy
W-VI Internal Make-up ir Wall Canopy With Diffuser W-VI single shell combination internal make-up air/air curtain canopy constructed of stainless steel where visible and aluminized steel where concealed.
More informationMODELS FF & FFC CEILING AND INLINE/CABINET VENTILATORS
Model FF Model FFC MODEL FF FEATURES Exhaust air up to 1500 CFM Forward curve centrifugal wheel for high static pressure capabilities to 1 w.g. Resilient mount, low RPM motor for quiet operation Speed
More informationModel FSD-212. Combination FIRE SMOKE DAMPERS
R APPLICATION Model is a combination fire smoke damper with 3V style blades. The has been qualified to 2000 fpm (10.2 m/s) and 6 in. wg (1.5 kpa) for operation and dynamic closure in emergency fire smoke
More informationStandard Installation Combination Fire/Smoke Damper Models: FS1, FS2, FT1, FT2, FA1, FA2, TA1, TA2 Fire Damper Models: MD19, MD39, MA19, MA39
Standard Installation Combination Fire/Smoke Damper Models: FS1, FS2, FT1, FT2, FA1, FA2, TA1, TA2 Fire Damper Models: MD19, MD39, MA19, MA39 APPLICATION These dynamically rated fire/smoke and fire s are
More informationControl Dampers and Fire Dampers. Volume 1 - March Insulated Control Dampers. Non-Insulated Control Dampers. Framing. Accessories.
Insulated Control Dampers 2 Volume 1 - March 2010 6 Non-Insulated Control Dampers 8 Framing Accessories 9 Jack Shaft Steel Control Dampers Fire Dampers 10 11 Control Dampers and Fire Dampers 3900 Insulated
More informationAMCA Seal Assures rating of Sound and Air performance. 2 year fan housing warranty, 1 year motor warranty
MODEL FEATURES Exhaust air up to 2,800 CFM in high static pressure applications up to 1 w.g. Direct drive units have low sound levels and quiet operation Ideal for applications where space is limited Non-overloading
More informationSINGLE DUCT AIR TERMINAL UNITS
AIR terminal units AIR TERMINAL UNITS MODEL NUMBER LEGEND XXXXX XXX -XXXX Model TH TL THECO Inlet Size (04, 05, 06, etc.) Generation 5, 6, 7 The METALAIRE single duct terminal units are at the core of
More informationIndustrial Fans & Blowers
Industrial Fans & lowers UVL IRECT RIVE UPLST Low silhouette weatherproof closure for vertical air discharge irect drive, low maintenance erodynamically efficient performance TEFC industrial duty motor
More informationDVAX-ARS. Roof-mounted unit for mechanical smoke extract
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and Heating Products Tunnel Fans DVAX- Roof-mounted unit for mechanical smoke extract 2 DVAX DVAX- Roof-mounted axial fan unit
More informationCONTROL DAMPERS. Model Model 1370CB. Model 1380CB. Model 1390CB B7
CONTROL DAMPERS MODEL 1380 HIGH PERFORMANCE ACKDRAFT DAMPER EXTRUDED ALUMINUM HEAVY DUTY Model 1380 is a high performance extruded aluminum gravity operated backdraft damper for use in medium to heavy
More informationType 4 Panel Enclosures
Ground-Mount Enclosures Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish pplication Houses electrical controls and instruments Easy access panels or
More informationShutter Fire Damper Type FSD GFSD 4/1.1/B/1
Shutter Fire Damper Type FSD GFSD /./B/ Contents Description Description... Construction... Installation Details... Control Accessories... Technical Data... Order Details... 7 8 9 FSD-L GFSD-L FSD Fire
More informationAnti-Pollution Ecological System
The FST ecological system was designed to meet all types of commercial kitchen installations. The ecological system is an environmentally-friendly solution that helps maintain air quality. The main objective
More informationModel SMD-301. Smoke Damper Steel Airfoil Blades UL 555S Leakage Class I. Application. Ratings. Size Limitations. Features
Model Application The is a leakage rated smoke damper with airfoil blades for operational closure in emergency smoke control situations. This model serves the function of both a control damper and smoke
More informationMOUNTING ARRANGEMENT OPTIONS OVERVIEW
ELT DRIVE SIDEWLL PROPELLER FNS MOUNTING RRNGEMENT OPTIONS OVERVIEW Page Mounting rrangement Description 2-3 Housing Heavy-gauge, all galvanized G-90 steel housing provides a simple solution to installing
More informationCONTROL SMOKE AND BALANCING DAMPERS
(UK) Limited CONTROL SMOKE AND BALANCING DAMPERS 00 SERIES - UNIVERSAL F e a t u r e s Robust construction of galvanised steel, with stainless steel options Opposed or parallel blade pattern Unsealed,
More informationMODELS LCE/LCS, L2E/L2S, L3E/L3S
LINE OVERVIEW S&P s Belt Drive Sidewall Propeller line is designed to exhaust or supply large volumes of air at relatively low static pressures. With levels of construction, the belt drive models are for
More informationFor installation into ductwork
X X testregistrierung Non-return dampers Type For installation into ductwork Non-return dampers prevent unwanted airflows against the intended airflow direction when the system is not in operation Maximum
More information