NORTHEAST CONTROLS INCORPORATED TEL: FAX: FAMILY OWNED AND OPERATED SINCE 1933

Transcription

1 MIL OWN N OPRT SIN 1933 Mobile and ixed Installations rc Welding as Welding utting Operations Pride in workmanship Reels built to order onsistent quality Service with integrity Value for your dollar

2 S R I S R WLIN RLS POWR OR MNUL RWIN To handle #2 through 4/0 cable to 400 amps. 400 amp rated rotary electrical device. Instant use with any cable length unwound. or use with single conductor electrode cable or grounding lead. Quick connection to your welder. 4-way roller assembly. Roller position must be specified. WR ear driven crank rewind, chain & sprocket powered by an electric, hydraulic or compressed air motor or spring rewind. uxiliary rewind and Pinion brake standard. SWR Non sparking ratchet assembly. eclutching arbor is provided to prevent damage from reverse winding. cable stop should be used. Series SWR Standard onfiguration Shown Protective round Lug oot part no Series WR (ir Power WR) Standard onfiguration Shown 2 annay Reels, Inc. Phone Toll ree O RLS ( ) RLIN ( ) US or (International) reels@hannay.com

3 S R I S SWR Parts rawing ISO 94, and WR Parts rawing ISO 188 Model able apacity of Reel pprox. Weight Standard Reel imensions*** Number feet rank/spring Roller inches m. Rewind 3 ssy mm. lb. kg. or Power auge of able Rewind #2 #1 1/0 2/0 3/0 4/0 See Note 4 O.. (in) NT SIP O.. (mm) RNK PWR. SPRIN SWR R SWR R SWR R WR WR Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 3. Weights shown in chart are for crank or spring rewind models. these amounts for power rewind models: (Series WR) Net (lbs.) Ship (lbs.) Net (kg.) Ship (kg.) lectric ydraulic ir When ordering power rewind Series WR, prefix model number with: = ir Rewind P = lectric Rewind = ydraulic Rewind (ir rewind reels are supplied with control valve and 18" air hose; 12v and 24v rewind reels are supplied with switch and solenoid; 115v rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 5. e sure to check dimensions and weights prior to ordering. 6. or welding hose and cable specifications see page 9. ***x,y indicate mounting holes Series SWR 6 1/2 R SR (ST) VR (OPT) TR (OPT) vailable Roller Positions SWR Models Series WR annay Reels, Inc. Phone Toll ree O RLS ( ) RLIN ( ) US or (International) reels@hannay.com 3

4 S R I S UL R WLIN RL MNUL RWIN To handle #1 through 4/0 cable to 400 amps. esigned to handle grounding and arc welding leads on the same reel unit. Two independent spools to hold separate lengths of welding cable. 400 amp rotary electrical device for instant and constant use. Long-wearing elrin bearings provide electrical insulation and lube-free ease of operation. ear driven crank rewind with a removable handle. Pinion brake is standard. Standard onfiguration Shown Protective round Lug oot part no Parts rawing ISO 185 Model able apacity of Reel pprox. Weight Reel imensions*** Number feet rank Rewind inches m. lb. mm. kg. auge of able #1 1/0 2/0 3/0 4/0 O.. (in) NT SIP O.. (mm) TWR TWR TWR TWR e sure to check dimensions and weights prior to ordering. 3. or welding hose and cable specifications see page 9. ***x,y indicate mounting holes. 4 annay Reels, Inc. Phone Toll ree O RLS ( ) RLIN ( ) US or (International) reels@hannay.com

5 M O L Standard onfiguration Shown PORTL RL MNUL RWIN To handle #2 through 4/0 cable to 400 amps. Rugged portable reel with carrying handle. Long-wearing elrin bearings. or use with single-conductor electrode cable or for grounding lead. 400 amp rotary electrical device. Manual rewind by a knob permanently attached. djustable friction brake standard. Parts rawing ISO 110 Protective round Lug oot part no Model able apacity of Reel pprox. Weight Reel imensions Number feet lb. inches m. kg. mm. auge of able #2 #1 1/0 2/0 3/0 4/0 O.. (in) NT SIP O.. (mm) WR * e sure to check dimensions and weights prior to ordering. 3. or welding hose and cable specifications see page 9. * When shipped as a parcel package (via edx or UPS ground). annay Reels, Inc. Phone Toll ree O RLS ( ) RLIN ( ) US or (International) reels@hannay.com 5

6 S R I S S WLIN RLS SPRIN RWIN To handle twin 1/4" through 3/8" welding hose. eavy-duty spring motor. Non sparking ratchet assembly. eclutching arbor to prevent damage from reverse winding. Standard inlets 90 ball bearing swivel joints 1/2" female NPT threads. Standard outlets male 9/16"-18 threads right hand for oxygen, left hand for gas. Pressures to 300 psi (21 bar). Temperatures from -40 to +200 (-40 to +93 ). Type of gas used MUST be specified. 4-way roller assembly. Roller position must be specified. ose stop is required. Shown with optional ose and ose Stop in the optional TR position. Parts rawing ISO 186 Model ose apacity of Reel pprox.weight Standard Reel imensions*** Number feet lb. Roller inches m. kg. ssy mm. I.. (in) 1/4" 3/8" I.. (mm) 6 9 O.. (in).53".66 NT SIP O.. (mm) N /25 2/ * N /8 2/ N J 2/50 2/ * N /15 2/ N /75 2/ * N /23 2/ N /100 2/ * N /30 2/ Reel models and capacities shown are for standard drag applications; for vertical lift applications consult factory. 3. Other sizes, from standard components, available on request. 4. e sure to check dimensions and weights prior to ordering. 5. or welding hose and cable specifications see page 9. NOTI: lexible onnector must be used between the inlet pipe and the inlet swivel joint. * When shipped as a parcel package (via edx or UPS ground), joints loose. Net wt. plus carton wt. ***x,y indicate mounting holes. SR (ST) VR (OPT) TR (OPT) vailable Roller Positions annay Reels, Inc. Phone Toll ree O RLS ( ) RLIN ( ) US or (International) reels@hannay.com

7 S R I S Series 2400 Standard onfiguration Shown with M Rewind Power 2400 Parts rawing ISO 187 M Parts rawing ISO 213 Model ose apacity of Reel pprox.weight Reel imensions*** Number feet lb. inches m. kg. mm. or Power Rewind See Note 5 Series 2400 Shown with ir Rewind I.. (in) 1/4" 3/8" I.. (mm) 6 9 O.. (in).53".66 NT SIP O.. (mm) M POWR M POWR M /100 2/ * /30 2/ M /150 2/ * /46 2/ M / * / M / * / Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 3. Weights shown in chart are for crank rewind models. these amounts for power rewind models: Net (lbs.) Ship (lbs.) Net (kg.) Ship (kg.) ydraulic ir imension is the overall length of standard model reels. On crank rewind models, the dimension shown is with the crank in rewind position. Reels require 2 clearance to remove crank handle. 5. When ordering power rewind models replace M prefix with: = ir Rewind = ydraulic Rewind (ir rewind reels are supplied with control valve and 18" air hose; hydraulic rewind reels are not supplied with control valve.) 6. e sure to check dimensions and weights prior to ordering. 7. or welding hose and cable specifications see page Some roller options may prohibit the use of our molded chain guard. 9. See page 8 for optional xternal Mounting rackets. NOTI: lexible onnector must be used between the inlet pipe and the inlet swivel joint. * When shipped as a parcel package (via edx or UPS ground). ***x,y indicate mounting holes. S WLIN RLS MNUL (M) OR POWR RWIN To handle twin 1/4" through 3/8" welding hose. M chain drive crank rewind or powered by a compressed air or hydraulic motor. M rewind reels supplied with a Pinion brake. Power reels not supplied with a brake. Standard inlets 90 ball bearing swivel joints with 1/2" female NPT threads. Standard outlets are male 9/16"-18 threads. Right hand for oxygen, left hand for gas. Rollers may be purchased. Specify roller position (mounting brackets are necessary). Pressures to 300 psi (21 bar). Temperatures fr om -40 to +200 (-40 to +93 ). Type of gas used MUST be specified Series 2400 (Power Rewind) Series M 2400 annay Reels, Inc. Phone Toll ree O RLS ( ) RLIN ( ) US or (International) reels@hannay.com

8 S R I S S WLIN RLS MNUL RWIN To handle twin 1/4" through 3/8" I.. hose. Two swivel joint inlets and two outlet risers to handle two equal lengths of hose. ear-drive crank rewind. Pinion brake as standard. Standard inlets 90 ball bearing swivel joints 1/2" female NPT threads. Standard outlets are male 9/16"-18 threads. Right hand for oxygen, left hand for gas. Pressures to 300 psi (21 bar). Temperatures from -40 to +200 (-40 to +93 ). Type of gas used MUST be specified. Standard ear riven rank Rewind Shown Optional xternal Mounting rackets part no dd 2-1/2" to the dimensions shown in the chart. Parts rawing ISO 205 Model ose apacity of Reel pprox. Weight Reel imensions*** Number feet rank Rewind inches m. lb. mm. kg. I.. (in) 1/4" 3/8" I.. (mm) 6 10 O.. (in).53".66" NT SIP O.. (mm) /150 2/ * /46 2/ / * / / * / Upon request, reels can be supplied with drum lengths other than shown. 3. e sure to check dimensions and weights prior to ordering. 4. or welding hose and cable specifications see page Some roller options may prohibit the use of our molded chain guard. NOTI: lexible onnector must be used between the inlet pipe and the inlet swivel joint. * When shipped as a parcel package (via ed-x or UPS round). *** x,y indicate mounting holes annay Reels, Inc. Phone Toll ree O RLS ( ) RLIN ( ) US or (International) reels@hannay.com

9 Welding ose & able Specifications. Welding ose Our oxygen/acetylene grade R hose assemblies with inside diameters of 1/4" and 3/8" have working pressures of 200 psi (14 bar), working temperatures of -40 to +200 (-40 to +93 ), and have an PM core and cover with one textile braid reinforcement. This hose is designed for oxygen/acetylene only. rade T oxygen/acetylene, propane, M..P.P. hose is also available. or hose assembly details and pricing, consult your annay dealer or factory. Welding and rounding able Wire Size (W) rea (Per onductor) irc. Mills Sq. mm #2 66, #1 84, #1/0 105, #2/0 133, #3/0 167, #4/0 211, or cable pricing consult factory. annay Reels, Inc. Phone Toll ree O RLS ( ) RLIN ( ) US or (International) reels@hannay.com 9

10 able Reels ose Reels Ordering & ccessory uide Pressure Wash & Spray Reels Stainless Steel Reels amily owned and operated since 1933, annay Reels is the world leader in both OM and aftermarket applications. annay offers thousands of standard hose reel and cable reel models, as well as unmatched custom capabilities. We can easily and affordably customize a reel to meet your exact specifications built to last, delivered fast. dditional catalogs are available through your local annay Reels dealer or online at WSP 4M 4-08 The reel leader. 553 State Route 143 Westerlo, New ork Toll ree Phone: O-RLS Toll ree ax: RLIN -mail: info@hannay.com Intl. Phone: Intl. ax: M IN U.S.. orm W Rev-2