PELLET HEATING SYSTEM MOTOR

Size: px

Start display at page:

Download "PELLET HEATING SYSTEM MOTOR"

Crystal Baker
5 years ago
Views:

1 PELLET HEATING SYSTEM MOTOR

21C Standard of The World Geared Motor What is their choice? It is SPG All of the four major electric home appliance manufacturers ; GE, Whirlpool, Electrolux, have chosen SPG Motor.

Product descriptions PLANETARY GEARHEADS Small-sized, Light, Compact High Precision, High Durability High Efficiency Easy Mounting with various Servo Motors INDUSTRIAL MOTOR Compact Size,

BLDC GEARED MOTOR Motors for factory automation and Miscellaneous automation installations High power, Excellent speed stability, Regular torque, low noise SHADED POLE GEARED MOTOR Motors for

range of product lines in accordance with rotation direction, speed control, and stop function Motors CAPACITOR RUN GEARED MOTOR Motors for copiers, automatic doors, and juicers High power

3 21C Standard of The World Geared Motor What is their choice? It is SPG All of the four major electric home appliance manufacturers ; GE, Whirlpool, Electrolux, have chosen SPG Motor. SPG which produces the world best quality motors shall become the standard of the world motor. Product descriptions PLANETARY GEARHEADS Small-sized, Light, Compact High Precision, High Durability High Efficiency Easy Mounting with various Servo Motors INDUSTRIAL MOTOR Compact Size, High Efficiency. High Reliability & Low Noise by Precise processing. BLDC GEARED MOTOR Motors for factory automation and Miscellaneous automation installations High power, Excellent speed stability, Regular torque, low noise SHADED POLE GEARED MOTOR Motors for home appliances, OA instruments, Ad equipment Produced mainly for export STANDARD GEARED MOTOR Industrial appliances, home appliances, OA instruments, and medical equipments Offering a wide range of product lines in accordance with rotation direction, speed control, and stop function Motors CAPACITOR RUN GEARED MOTOR Motors for copiers, automatic doors, and juicers High power and custom made orders DC GEARED MOTOR Motors for vending machines, Coin exchanger, Printers, X-Ray and etc Product advantages include maneuverability, high power, and easy speed control. BLDC MOTOR Motors for copiers, printers, home appliances (air conditioners and refrigerators), FA instruments and air cleaners AC MOTOR Motors for air conditioners, microwave ovens, refrigerators, washers, dishwashers, freezers, and pumps

Global Industry Standard for Motor Pellet

(page 09p) ISG-3 TYPE(25~50T) (page 15p~16p)

BRUSHLESS SERIES (page 18p) STANDARD AC TYPE

ISG-3 TYPE (HOLLOW SHAFT) (page 17p) 4 I SPG

4 Global Industry Standard for Motor Pellet Heating System Motor ICG-75 OPEN CASE TYPE (page 09p) ISG-3 TYPE(25~50T) (page 15p~16p) ISG-3 TYPE (HOLLOW SHAFT) (page 17p) DC BRUSHLESS SERIES (page 18p) STANDARD AC TYPE (80 FRAME) (page 08p) ICG-75 OPEN CASE TYPE (page 09p) ISG-3 TYPE(25~50T) (page 15p~16p) ISG-3 TYPE (HOLLOW SHAFT) (page 17p) 4 I SPG MOTOR

21C Standard of The World Geared Motor The world-class SPG motor completes the Pellet Heating

into environmentally-friendly motor The application of SPG Motors makes it possible to

STANDARD AC TYPE (80 FRAME) (page 08p) ICG-75 OPEN CASE TYPE (page 09p) FLAT GEARED INDUCTION

5 21C Standard of The World Geared Motor The world-class SPG motor completes the Pellet Heating System, allowing it to go one step further in delivering high performance to its finished products. The world-class technology of the advanced SPG Company has been thoroughly researched and made into environmentally-friendly motor products. The application of SPG Motors makes it possible to accomplish the environmentally-friendly Pellet Heating Systems. STANDARD AC TYPE (80 FRAME) (page 08p) ICG-75 OPEN CASE TYPE (page 09p) FLAT GEARED INDUCTION MOTOR (FA/FB SERIES) (page 10p~14p) STANDARD AC TYPE (80 FRAME) (page 08p) ICG-75 OPEN CASE TYPE (page 09p) ISG-3 TYPE(25~50T) (page 15p~16p) AC RADIAL FAN MOTOR (page 19p~25p) ISG-3 TYPE (HOLLOW SHAFT) (page 17p) SPG MOTOR I 5

6 C O N T E N T S AC GEARED MOTOR STANDARD AC TYPE(80 FRAME) ICG-75 OPEN CASE TYPE FLAT GEARED INDUCTION MOTOR(FA SERIES) FLAT GEARED INDUCTION MOTOR(FB SERIES) SHADED POLE GEARED MOTOR ISG-3 TYPE(25~30T) ISG-3 TYPE(40~50T) ISG-3 TYPE(HOLLOW SHAFT)... 17

Global Industry Standard for Motor BLDC GEARED

inlet, Ø 180_A1845 Single inlet, Ø 210_A2145

7 Global Industry Standard for Motor BLDC GEARED MOTOR DC BRUSHLESS SERIES AC RADIAL FAN MOTOR Single inlet, Ø 150_A1520 Single inlet, Ø 160_A1640 Single inlet, Ø 180_A1826 Single inlet, Ø 180_A1845 Single inlet, Ø 210_A2145 Single inlet, Ø 160_A

AC GEARED MOTOR STANDARD AC TYPE(80 FRAME) APPLICATION : PELLET BURNER (OR STOVE) INPUT VOLTAGE : 1PHASE 230V~ 50Hz INSULATION CLASS : B (130) DUTY : CONTINUOUS, 15min SPEED RANGE : 5.8 ~ 16.

MOTOR PROTECTOR : THERMALLY PROTECTED IP GRADE : IP54 MOUNTING POSITION : ANY CABLE EXIT : POWER CORD SPECIFICATION TYPE GEAR HEAD RATIO IDLE SPEED [r/min] STARTING TORQUE [N.m] RATING TORQUE [N.

8 AC GEARED MOTOR STANDARD AC TYPE(80 FRAME) APPLICATION : PELLET BURNER (OR STOVE) INPUT VOLTAGE : 1PHASE 230V~ 50Hz INSULATION CLASS : B (130) DUTY : CONTINUOUS, 15min SPEED RANGE : 5.8 ~ 16.0 r/min OUTPUT ROTATION : C.W AND C.C.W GEAR HEAD PERMISSIBLE TORQUE : 8.0 N m Max. MOTOR PROTECTOR : THERMALLY PROTECTED IP GRADE : IP54 MOUNTING POSITION : ANY CABLE EXIT : POWER CORD SPECIFICATION TYPE GEAR HEAD RATIO IDLE SPEED [r/min] STARTING TORQUE [N.m] RATING TORQUE [N.m] INPUT CURRENTS [A] INPUT WATTS [W] OUTPUT WATTS [W] DUTY S8I15GX-TCE CONT min S8I25GX-TCE CONT min S8R25GX-TCE min DEMENSIONS Max. CONNECTOR OPTIONAL LEAD WIRES REF. Ø34 P.C.D Ø94 ± Ø10 Max. SCREW : M5 (4-14) (3) Ø SHAFT Ø AND LENGTH TO SUIT CUSTOMERS REQUIREMENTS REF. 8 I SPG MOTOR

9 ICG-75 OPEN CASE TYPE APPLICATION : PELLET BURNER (OR STOVE) INPUT VOLTAGE : 1PHASE 230V~ 50Hz INSULATION CLASS : B (130) DUTY : 30min SPEED RANGE : 1.6, 3.0, 7.0, 10.0 r/min AND DEMANDED SPEED OUTPUT ROTATION : C.W AND C.C.W GEAR HEAD PERMISSIBLE TORQUE : 30 N m Max. MOTOR PROTECTOR : THERMALLY PROTECTED IP GRADE : IP20 MOUNTING POSITION : ANY CABLE EXIT : DEMANDED CONNECTOR SPECIFICATION TYPE GEAR HEAD RATIO IDLE SPEED [r/min] STARTING TORQUE [N.m] RATING TORQUE [N.m] INPUT CURRENTS [A] INPUT WATTS [W] OUTPUT WATTS [W] DUTY ICG ICG min min min min DEMENSIONS TYPE A B ICG TYPE ICG TYPE B A REF [OPTINAL] * TAP M5 * HOLES Ø4.4~Ø5.5 HOLES REF Ø12.7 Max REF Ø60 Ø22.3 SHAFT Ø AND LENGTH TO SUIT CUSTOMERS REQUIREMENTS REF. SPG MOTOR I 9

10 AC GEARED MOTOR FLAT GEARED INDUCTION MOTOR (FA SERIES) APPLICATION : PELLET BURNER (OR STOVE) INPUT VOLTAGE : 1PHASE 230V~ 50Hz INSULATION CLASS : B (130) DUTY : CONTINUOUS GEAR HEAD RATIO : 1/43 TO 1/905 SPEED RANGE : r/min AND DEMANDED SPEED OUTPUT ROTATION : C.W AND C.C.W GEAR HEAD PERMISSIBLE TORQUE : 50 N m Max. MOTOR PROTECTOR : THERMALLY PROTECTED IP GRADE : IP54 MOUNTING POSITION : ANY CABLE EXIT : DEMANDED CONNECTOR MOTOR Rated Starting Stall OUTPUT Votage Frequency NO Duty Current speed Torque Torque Torque Capacitor W V Hz A r/min Nm Nm Nm μf Cont GEARED MOTOR No Load Rated Permissible Starting Stall Motor Ratio NO Stage Speed Current speed Current Torque Torque Torque Torque Design i r/min A r/min A Nm Nm Nm Nm W W I SPG MOTOR

11 t t W W (102) Cable gland L 64.5 (1) FAH17(20)- -IT25(40)XL(B,R) Ø87.5 B L Output (W) 25/40 ØHW t u Ød L 17 (20) 19.3 (22.8) 5 (6) 25 (30) u ØHW 150 R (Ød) Z NOTE - ( ) are the dimensions at ØHW Cable gland position change is possible Ø9 Side mounting(option) 12 X M6 or M8 thread Additional mounting(option) 4 X M6 thread. PCD Ø75~ (102) Fan Cable gland L 64.5 (1) FAH17(20)- -IT60(90)XL(B,R) Output (W) ØHW t u Ød L (20) (22.8) (6) (30) NOTE - ( ) are the dimensions at ØHW Cable gland position change is possible 80 u ØHW Ø9 90 o B Side mounting(option) 12 X M6 or M8 thread (Ød) 2.5 Additional mounting(option) 4 X M6 thread. PCD Ø75~85 L R Z (102) L Cable gland 64.5 (1) L B FAR(L,B)22- -IT XL(B,R) Output (W) L 25/ NOTE - Cable gland position change is possible 80 Ø22h7 (6) Ø9 R Side mounting(option) 12 X M6 or M8 thread Additional mounting(option) 4 X M6 thread. PCD Ø75~85 Ø22h7 (6) (6) (6) Ø22h7 Ø22h7 Z SPG MOTOR I 11

AC GEARED MOTOR FLAT GEARED INDUCTION MOTOR (FB SERIES) APPLICATION : PELLET BURNER (OR STOVE) INPUT VOLTAGE : 1PHASE 230V~ 50Hz INSULATION CLASS : B (130) DUTY : CONTINUOUS GEAR HEAD RATIO : 1/21 TO

MOTOR PROTECTOR : THERMALLY PROTECTED IP GRADE : IP54 MOUNTING POSITION : ANY CABLE EXIT : DEMANDED CONNECTOR MOTOR Rated Starting Stall OUTPUT Votage Frequency NO Duty Current speed Torque Torque

12 AC GEARED MOTOR FLAT GEARED INDUCTION MOTOR (FB SERIES) APPLICATION : PELLET BURNER (OR STOVE) INPUT VOLTAGE : 1PHASE 230V~ 50Hz INSULATION CLASS : B (130) DUTY : CONTINUOUS GEAR HEAD RATIO : 1/21 TO 1/306 SPEED RANGE : r/min AND DEMANDED SPEED OUTPUT ROTATION : C.W AND C.C.W GEAR HEAD PERMISSIBLE TORQUE : 100 N m Max. MOTOR PROTECTOR : THERMALLY PROTECTED IP GRADE : IP54 MOUNTING POSITION : ANY CABLE EXIT : DEMANDED CONNECTOR MOTOR Rated Starting Stall OUTPUT Votage Frequency NO Duty Current speed Torque Torque Torque Capacitor W V Hz A r/min Nm Nm Nm μf Cont GEARED MOTOR No Load Rated Permissible Starting Stall Motor Ratio NO Stage Speed Current speed Current Torque Torque Torque Torque Design i r/min A r/min A Nm Nm Nm Nm W W I SPG MOTOR

13 W W W W SPG MOTOR I 13

14 t t t AC GEARED MOTOR (162) (102) (11) L Cable gland (1) FBH17(20)- -IT25(40)XL(B,R) Output (W) 25/40 ØHW t u Ød L 17 (20) 19.3 (22.8) 5 (6) NOTE - ( ) are the dimensions at ØHW Cable gland position change is possible 25 (30) A A' u ØHW (248) Ø87.5 Additional mountiong(option) 4 X M6 thread. PCD Ø100 B L R (Ød) (87.5) Z (162) (102) (11) Fan Cable gland L (1) FBH17(20)- -IT60(90)XL(B,R) o90 B L Output (W) ØHW t u Ød L (20) (22.8) (6) (30) NOTE - ( ) are the dimensions at ØHW Cable gland position change is possible A A' u ØHW (248) Additional mountiong(option) 4 X M6 thread. PCD Ø100 R (Ød) (87.5) Z FBH17(20)- -IT180BL(B,R) (169) (109) (11) Cable gland Fan 45 o103 B L (241.5) (1) Output (W) 120/ ØHW t u Ød L 17 (20) 19.3 (22.8) 5 (6) NOTE - ( ) are the dimensions at ØHW Cable gland position change is possible 25 (30) A A' u ØHW (248) Additional mountiong(option) 4 X M6 thread. PCD Ø100 R (Ød) 3 Z (87.5) (162) (102) (0.9) L Cable gland (1) FBR(L,B)28- -IT X(B)L(B,R) Output (W) L 25/ /150/ (11) (248) Ø87.5 B L R 40 (8) Ø28h7 NOTE - Cable gland position change is possible Ø28h7 (8) Additional mountiong(option) 4 X M6 thread. PCD Ø100 Ø28h7 (8) 81.5 (8) Ø28h7 45 Z I SPG MOTOR

SHADED POLE GEARED MOTOR ISG-3 TYPE(25~30T) 69.85 REF. 60.33 30.165 Application : Pellet Burner(or Stove) - Fuel supply Insulation Cl

15 SHADED POLE GEARED MOTOR ISG-3 TYPE(25~30T) REF Application : Pellet Burner(or Stove) - Fuel supply Insulation Class : B(130) Mounting Position : Any Output Rotation : C.W or C.C.W Motor Protection : Impedance or Thermally Protected Cable exit : Variable Gear Box Permissible Torque : 33.8 Nm [OPTINAL] B * Duty TAP M5 : S1(Continuous), S2(Short-time), 50.5 S3(Intermittent A 16.5 periodic) * HOLES Ø4.4~Ø5.5 HOLES Output Shaft : Length and diameter to suit individual customer requirements etc. : Low Noise, Fan Ass'y Type 49.2 SPECIFICATION REF Type A B ISG-3225Type 25mm 92mm ISG-3230Type 30mm 97mm Ø12.7 Max. Ratio SHAFT Ø AND 1/1414(Gear Step : 5) 1/1821(Gear Step : 5) Ø25.4 LENGTH TO SUIT CUSTOMERS ±10 50Hz 2.0 r/min 1.5 r/min REQUIREMENTS 60Hz 2.5 r/min 1.9 r/min 18.5 (COVER) REF. * A customized rpm and torque available. (2X)#250" MALE TAB TERMINALS CONNECTOR OPTIONAL LEAD WIRES 300 (L/W LENGTH) DIMENSIONS REF * TAP M5 * HOLES Ø4.4~Ø5.5 HOLES B 50.5 A REF Ø25.4 Ø12.7 Max. SHAFT Ø AND LENGTH TO SUIT CUSTOMERS REQUIREMENTS (2X)#250" MALE TAB TERMINALS CONNECTOR OPTIONAL LEAD WIRES 300 ±10 (L/W LENGTH) N-T CURVE CHARACTORISTICS REF. TORQUE [Kgf-cm] BREAK DOWN TORQUE STARTING TORQUE RATING TORQUE RATING SPEED SPEED [rpm] NO LOAD SPEED 3 Core type Speed-Torque Charactoristics SYNCHRONOUS SPEED Note) 1. Tb : Break Down Torque, Ts : Starting Torque, Tr : Rating Torque(About Max Effciency) 2. Geared Motor Output Torque = Motor Torque Gear Ratio Gears Step(90%) Ex) Motors(C-ⅰ) + Gear Ratio(1/192) = ^3 = N-m(Ts) 3. Motor Specification Data may be largely differed according with Duty Type and Cooling methods. 4. If fan installed, Motor output canbe increased approximately 20%. 5. Refer to Motor Specification Data above. (Contact with agency or R&D for development) 6. Geared Motor Torque can be used within maximum permissible torque of GearBox. (Refer to Maximum Permissible Torque of Gear Box table) SPG MOTOR I 15

16 18.5 SHADED POLE GEARED MOTOR ISG-3 TYPE(40~50T) Application : Pellet Burner(or Stove) - Ashes Cleaner Insulation Class : B(130) Mounting Position : Any Output Rotation : C.W or C.C.W Motor Protection : Impedance or Thermally Protected Cable exit : Variable Gear Box Permissible Torque : 33.8 Nm Duty : S1(Continuous), S2(Short-time), S3(Intermittent periodic) Output Shaft : Length and diameter to suit individual customer requirements etc. : Low Noise, Fan Ass'y Type SPECIFICATION Type A B ISG-3240Type 40mm 107mm ISG-3250Type 50mm 117mm Ratio 1/511(Gear Step : 4) 1/853(Gear Step : 4) 50Hz 5.7 r/min 3.4 r/min 60Hz 6.8 r/min 4.1 r/min * A customized rpm and torque available. DIMENSIONS REF [OPTINAL] * TAP M5 * HOLES Ø4.4~Ø5.5 HOLES 50.5 B A REF Ø12.7 Max Ø25.4 SHAFT Ø AND LENGTH TO SUIT CUSTOMERS REQUIREMENTS (2X)#250" MALE TAB TERMINALS CONNECTOR OPTIONAL LEAD WIRES 300 ±10 (L/W LENGTH) 18.5 (COVER) REF. N-T CURVE CHARACTORISTICS TORQUE [Kgf-cm] 16 I SPG MOTOR BREAK DOWN TORQUE STARTING TORQUE RATING TORQUE RATING SPEED REF SPEED [rpm] NO LOAD SPEED 3 Core type Speed-Torque Charactoristics REF SYNCHRONOUS SPEED Ø25.4 * TAP M5 Note) * HOLES Ø4.4~Ø5.5 HOLES 50.5 A Tb : Break Down Torque, Ts : Starting Torque, Tr : Rating Torque(About Max Effciency) 2. Geared Motor Output Torque = Motor Torque Gear Ratio Gears Step(90%) Ex) Motors(C-ⅰ) + Gear Ratio(1/192) = ^3 = N-m(Ts) 3. Motor Specification Data may be largely differed according with Duty Type and Cooling methods. 4. If fan installed, Motor output canbe increased approximately 20%. 5. Refer to Motor Specification Data above. (Contact with agency or R&D for development) 6. Geared Motor Torque can be used within maximum permissible torque of GearBox. Ø12.7 Max. (Refer to Maximum Permissible Torque of Gear Box table) SHAFT Ø AND LENGTH TO SUIT CUSTOMERS REQUIREMENTS B (2X)#250" MALE TAB TERMINALS CONNECTOR OPTIONAL LEAD WIRES 300 ±10 (L/W LENGTH)

ISG-3 TYPE(HOLLOW SHAFT) Application : Pellet Burner(or Stove) - Ashes Cleaner Insulation Class : B(130) Mounting Position : Any Output Rotation : C.W or C.C.W Motor Protection : Impedance or Thermally Protected Leads : Variable Gear Box Permissible Torque : 33.

: Low Noise, Fan Ass'y Type SPECIFICATION Ratio 1/922.7(Gear Step : 4) 1/1855.7(Gear Step : 5) 50Hz 3.0 r/min 1.6 r/min 60Hz 3.7 r/min 1.8 r/min * A customized rpm and torque available. DIMENSIONS 93.

17 ISG-3 TYPE(HOLLOW SHAFT) Application : Pellet Burner(or Stove) - Ashes Cleaner Insulation Class : B(130) Mounting Position : Any Output Rotation : C.W or C.C.W Motor Protection : Impedance or Thermally Protected Leads : Variable Gear Box Permissible Torque : 33.8 Nm Duty : S1(Continuous), S2(Short-time), S3(Intermittent periodic) Output Shaft : Length and diameter to suit individual customer requirements etc. : Low Noise, Fan Ass'y Type SPECIFICATION Ratio 1/922.7(Gear Step : 4) 1/1855.7(Gear Step : 5) 50Hz 3.0 r/min 1.6 r/min 60Hz 3.7 r/min 1.8 r/min * A customized rpm and torque available. DIMENSIONS 93.5 REF REF * TAP M5 * HOLES Ø4.4~Ø5.5 HOLES 160 REF REF Ø16 Max. HOLLOW SHAFT BEARING OPTIONAL BALL BEARING SHAFT Ø AND LENGTH TO SUIT CUSTOMERS REQUIREMENTS REF REF. N-T CURVE CHARACTORISTICS TORQUE [Kgf-cm] BREAK DOWN TORQUE STARTING TORQUE RATING TORQUE RATING SPEED SPEED [rpm] NO LOAD SPEED 3 Core type Speed-Torque Charactoristics SYNCHRONOUS SPEED Note) 1. Tb : Break Down Torque, Ts : Starting Torque, Tr : Rating Torque(About Max Effciency) 2. Geared Motor Output Torque = Motor Torque Gear Ratio Gears Step(90%) Ex) Motors(C-ⅰ) + Gear Ratio(1/192) = ^3 = N-m(Ts) 3. Motor Specification Data may be largely differed according with Duty Type and Cooling methods. 4. If fan installed, Motor output canbe increased approximately 20%. 5. Refer to Motor Specification Data above. (Contact with agency or R&D for development) 6. Geared Motor Torque can be used within maximum permissible torque of GearBox. (Refer to Maximum Permissible Torque of Gear Box table) SPG MOTOR I 17

18 BLDC GEARED MOTOR DC BRUSHLESS SERIES Application : Pellet Burner(or Stove) Input Voltage : DC 24V Insulation Class : B(130) Mounting Position : Any Output Rotation : C.W or C.C.W Motor Protection : Over Current Limit Cable exit : Variable Gear Box Permissible Torque : 33.8 Nm Duty : S1(Continuous) Speed Range : 0.9~30 r/min etc. : Low Noise, High Efficiency SPECIFICATION Core Height 15mm Ratio 1/100(Gear Step : 3) to 1/3238(Gear Step : 5) DC 24V 0.9 r/min to 30 r/min TORQUE CHARACTERISTIC SPEED(r/min) NOLOAD SPEED STARTING TORQUE TORQUE(kgf-cm) REF. DIMENSIONS REF [OPTINAL] * TAP M5 * HOLES Ø4.4~Ø5.5 HOLES REF REF Ø22.3 Ø12.7 Max. SHAFT Ø AND LENGTH TO SUIT CUSTOMERS REQUIREMENTS REF. 18 I SPG MOTOR

19 AC RADIAL FAN MOTOR Single inlet, Ø 150_OSB-9215-A1520 Material : Impeller made of corrosion-resistant stainless steel, steel sheets Direction of rotation : Counter-clockwise, clockwise seen on rotor Type of protection : IP 44 Insulation class : "F" Mounting position : Any Condensate discharges : None Mode of operation : Continuous operation (S1) Bearings : Maintenance-free ball bearings SPECIFICATION TYPE V Hz RPM W A C OSB-9215-A /450 CURVES STATIC PRESSURE (mmaq) AIR FLOW(CMM) CONNECTION DIAGRAM MOTOR HALLIC DIMENSIONS ROTATION ROTATION Ø6.5HOLE 4-Ø7HOLE Ø (158.5) (Ø152) 4-90 Ø185 Ø150 Ø132 Ø Ø5.5 P.C.D Ø ± ± ± ±1 SPG MOTOR I 19

20 AC RADIAL FAN MOTOR Single inlet, Ø 160_OSB-9225-A1640 Material : Impeller made of steel sheets Direction of rotation : Counter-clockwise, clockwise seen on rotor Type of protection : IP 44 Insulation class : "F" Mounting position : Any Condensate discharges : None Mode of operation : Continuous operation (S1) Bearings : Maintenance-free ball bearings SPECIFICATION TYPE V Hz RPM W A C OSB-9225-A /450 CURVES STATIC PRESSURE (mmaq) CONNECTION DIAGRAM MOTOR HALLIC AIR FLOW(CMM) DIMENSIONS ROTATION Ø6.5HOLE 4-Ø7HOLE Ø180 ROTATION Ø6.5HOLE 4-Ø7HOLE Ø Ø195 Ø Ø195 Ø160 Ø132 (40) ±1.5 95±1 20 I SPG MOTOR

21 Single inlet, Ø 180_OSB-9215-A1826 Material : Impeller made of steel sheets Direction of rotation : Counter-clockwise, clockwise seen on rotor Type of protection : IP 44 Insulation class : "F" Mounting position : Any Condensate discharges : None Mode of operation : Continuous operation (S1) Bearings : Maintenance-free ball bearings SPECIFICATION TYPE V Hz RPM W A C OSB-9215-A /450 CURVES STATIC PRESSURE (mmaq) AIR FLOW(CMM) CONNECTION DIAGRAM MOTOR HALLIC DIMENSIONS ROTATION Ø6.5HOLE 4-Ø7HOLE Ø200 ROTATION Ø6.5HOLE 4-Ø7HOLE Ø Ø215 Ø Ø215 Ø180 Ø132 (26) ±1.5 95±1 SPG MOTOR I 21

22 AC RADIAL FAN MOTOR Single inlet, Ø 180_OSB-9225-A1845 Material : Impeller made of steel sheets Direction of rotation : Counter-clockwise, clockwise seen on rotor Type of protection : IP 44 Insulation class : "F" Mounting position : Any Condensate discharges : None Mode of operation : Continuous operation (S1) Bearings : Maintenance-free ball bearings SPECIFICATION TYPE V Hz RPM W A C OSB-9225-A /450 CURVES STATIC PRESSURE (mmaq) AIR FLOW(CMM) CONNECTION DIAGRAM MOTOR HALLIC DIMENSIONS ROTATION Ø6.5HOLE 4-Ø7HOLE Ø200 ROTATION Ø6.5HOLE 4-Ø7HOLE Ø Ø215 Ø Ø215 Ø180 Ø132 (45) ±1.5 ±1 22 I SPG MOTOR

Single inlet, Ø 210_OSB-9235-A2145 Material : Impeller made of steel sheets Direction of rotation : Counter-clockwise, clockwise seen on rotor Type of protection : IP 44 Insulation class : "F"

23 Single inlet, Ø 210_OSB-9235-A2145 Material : Impeller made of steel sheets Direction of rotation : Counter-clockwise, clockwise seen on rotor Type of protection : IP 44 Insulation class : "F" Mounting position : Any Condensate discharges : None Mode of operation : Continuous operation (S1) Bearings : Maintenance-free ball bearings SPECIFICATION TYPE V Hz RPM W A C OSB-9235-A /450 CURVES STATIC PRESSURE (mmaq) AIR FLOW(CMM) CONNECTION DIAGRAM MOTOR HALLIC DIMENSIONS ROTATION Ø6.5HOLE 4-Ø7HOLE Ø230 ROTATION Ø6.5HOLE 4-Ø7HOLE Ø Ø245 Ø Ø245 Ø210 Ø32 (45) ± ±1 SPG MOTOR I 23

AC RADIAL FAN MOTOR Single inlet, Ø 160_OSB-9225-A1626 Material : Impeller made of steel sheets Direction of rotation : Counter-clockwise, clockwise seen on rotor Type of protection : IP 44

24 AC RADIAL FAN MOTOR Single inlet, Ø 160_OSB-9225-A1626 Material : Impeller made of steel sheets Direction of rotation : Counter-clockwise, clockwise seen on rotor Type of protection : IP 44 Insulation class : "F" Mounting position : Any Condensate discharges : None Mode of operation : Continuous operation (S1) Bearings : Maintenance-free ball bearings SPECIFICATION TYPE V Hz RPM W A C OSB-9225-A /450 CURVES STATIC PRESSURE (mmaq) CONNECTION DIAGRAM MOTOR HALLIC AIR FLOW(CMM) DIMENSIONS 25 ROTATION 25 ROTATION 4-90 P.C.DØ175± P.C.DØ175±0.2 Ø160 Ø215 Ø160 Ø132 4-Ø6.5 4-Ø6.5 (26) ±1.5 ±1 24 I SPG MOTOR

25 Scroll dimensions P A B R C M K 17 D J H E F G N Scroll dimensions for AC/EC centrifugal fans SIZE A B C D E F G H J K M N P R 150/ P+D Z Y Z Y ØX ØX A+G R H Distance between impeller and scroll housing/inlet nozzle SIZE X Y Z R H 150/ SPG MOTOR I 25

26 MEMO

27 MEMO

SPG Co., Ltd SPG USA, INC 501 Lively Blvd. Elk Grove Village, IL 60007, USA TEL. 1-847-439-4949 FAX. 1-847-439-4940 www.spg-usa.

28 SPG Co., Ltd SPG USA, INC 501 Lively Blvd. Elk Grove Village, IL 60007, USA TEL FAX SPG Europe B.V. Tupolevlaan 46, 1119NZ, Schiphol-Rijk,The Netherlands TEL FAX

It is SPG. 21C Standard of The World Geared Motor. Product descriptions

It is SPG. 21C Standard of The World Geared Motor. Product descriptions 21C Standard of The World Geared Motor It isspg All of the four major electric home appliance manufacturers ; GE, Whirlpool, Electrolux, have chosen SPG Motor. SPG which produces the world best quality