RADIAL ALUMINUM LOW PRESSURE

Transcription

1 RADIAL ALUMINUM LOW PRESSURE Content: LOW PRESSURE BLOWERS... 2 GENERAL... 3 D03M, E D04M, E D05M, E D052M, E D060, E D064, E D066, E D07, D D08, D D09, D ACCESSORIES

2 LOW PRESSURE BLOWERS Feature of this direct drive blowers is the aluminum housing with radial impeller wide forward curved blades. With a stocky build this ensures particularly quiet operation. The suction side is provided with a protective netting, there may possibly be a suction inlet to be mounted. We can also supply an extensive range of accessories. All fans are available in 8 positions, would like before ordering to make a choice in clockwise or counterclockwise rotation, the position of the snail shell can be decide for yourself. The motor can be mounted both horizontally and vertically. The blowers are in standard version for temperatures up to 50 C, for temperatures up to 180 C can be a hot soak clutch built, suitable type S484. The motors IP54 equipped with a voltage of 230 volts or 230/400 volts to 3 kw., Above 400/690 Volt. The default frequency is 50 Hz., Other voltages and 60 Hz. are also possible. The blowers can also be supplied with an electronically controlled engine, this concerns the types RVE. If there is dirt on the media, we recommend a filter. For suction operation of the blower should be 80% of the fan capacity take. The sound data obtained by measurement with an open suction inlet at 1 meter. All blowers are suitable for continuous operation. The impeller and the snail shells can be supplied in stainless steel. 2

3 Total pressure GENERAL Clockwise Counter Clockwise All blowers can be supplied in various positions according to the above pictures. As standard we deliver the right (clockwise) model AR. If you want a left version (counter clockwise) and the base is molded, it must be in advance indicate this. With a removable base the snail shall can be turned, but one must then assemble a left impeller. When a channel on the discharge side connection of the same diameter as the blower mouth then P-dyn.2 as pressure drop indicated. If a larger channel mounted then, the dynamic pressure is considerable smaller and can be used as static pressure. At 100% bigger will win about 55% back. Suction side does not affect because of diffusion effects. Blower characteristic P dyn. 2 Characteristic A B Capacities B pressure profit at increasing blow channel B-drukwinst bij 3

4 D03M, E03 S484 version total length 227 mm. Voltage Frequency Speed Power Capacitor Weight m³/min. Pa. V. Hz. Amp. o/min. kw. µf/v Kg. D03M 3, / 0,36-0,68/ ,21-0, ,03-4,2 D03M 3, / 0,33-0,55/ ,19-0, ,05-4,2 E03 3, , ,03 3/450 3,9 E03 3, , ,05 3/450 3,9 50 HZ 60 HZ 4

5 D04M, E04 S484 version total length 239,5 mm. Voltage Frequency Speed Power Capacitor Weight m³/min. Pa. V. Hz. Amp. o/min. kw. µf/v Kg. D04M 5, / ,45-0,72/ 0,26-0, ,07-4,5 D04M 6, / ,47-0,52/ 0,27-0, ,12-4,5 E04 5, , ,07 3/450 4,7 E04 6, , ,12 3/450 4,7 5

6 D05M, E05 S484 version total length 266 mm. Voltage Frequency Speed Power Capacitor Weight m³/min. Pa. V. Hz. Amp. o/min. kw. µf/v Kg. D05M 10, / ,59/0, ,13-5,0 D05M 11, / ,74/0, ,19-5,0 E05 10, , ,14 3/450 5,2 E05 9, , ,14 3/450 5,2 6

7 D052M, E052 S484 version total length 371 mm. Voltage Frequency Speed Power Capacitor Weight m³/min. Pa. V. Hz. Amp. o/min. kw. µf/v Kg / 1,25-2,15/ D052M 15, ,37-7, ,72-1,24 D052M 18, / ,73-1,91/ 1,00-1, ,44-7,6 E052 13, , ,37 10/450 6,4 E052 12, , ,44 8/450 6,4 7

8 D060, E060 S484 version total length 387 mm. Voltage Frequency Speed Power Capacitor Weight m³/min. Pa. V. Hz. Amp. o/min. kw. µf/v Kg. D060 22, ,50-1, ,55-12,0 D060 EFF IE2 24, ,55-2, ,90-12,0 E060 22, , ,55 16/450 11,0 E060 22, , ,75 16/450 11,0 8

9 D064, E064 S484 version total length 403 mm. D064 D064 Voltage Frequency Speed Power Capacitor Weight m³/min. Pa. V. Hz. Amp. o/min. kw. µf/v Kg ,00-2, ,10-15, ,45-2, ,32-15,0 E , ,10 30/450 17,0 E , ,10 30/450 17,0 9

10 D066, E066 S484 version total length 443 mm. Voltage Frequency Speed Power Capacitor Weight m³/min. Pa. V. Hz. Amp. o/min. kw. µf/v Kg. D / ,55/3, ,5-19,0 D / ,45/3, ,8-19,0 E , ,5 30/450 18,0 E , ,5 30/450 18,0 10

11 D07, D072 S484 version total length + 28 mm. D07 D07 D072 D072 Voltage Frequency Speed Power Weight m³/min. Pa. V. Hz. Amp. o/min. kw. Kg / ,50/4, , / ,20/5, , / ,4/6, , / ,6/7, ,

12 D08, D082 S484 version total length + 28 mm. D08 D08 D082 D082 Voltage Frequency Speed Power Weight m³/min. Pa. V. Hz. Amp. o/min. kw. Kg / ,50/4, , / ,20/5, , / ,4/6, , / ,6/7, ,

13 D09, D092 S484 version total length + 28 mm. D09 D09 D092 D092 Voltage Frequency Speed Power Weight m³/min. Pa. V. Hz. Amp. o/min. kw. Kg , , , , , , , ,

14 ACCESSORIES Control valve. Is mounted on the pressure side. a b d e f h Article nr. D03, E D04, E04, 2D D045, E045, 2D D05, E05, 2D D052, E052, 2D D060, E060, 2D D064, E064, 2D D066, E066, 2D D07, D072, 2D D08, D082, 2D D09,D Blow nozzle. a b d1 d2 d3 e f h1 h2 Article nr. D03, E D04, E04, 2D D045, E045, 2D D05, E05, 2D D052, E052, 2D D060, E060, 2D D064, E064, 2D D066, E066, 2D D07, D072, 2D D08, D082, 2D D09, D Suction nozzle d1 d2 d3 d4 d5 h1 h2 Article nr. D03, E ,5 4x5, D04, E04, 2D ,5 4x5, D045, E045, 2D x D05, E05, 2D ,5 4x5, D052, E052, 2D x5, D060, E060, 2D x5, D064, E064, 2D ,5 4x5, D066, E066, 2D x D07, D072, 2D x D08, D082, 2D x D09, D x bosaventilatoren bv 14

15 Fine dust filter. Is mounted on the suction side. d1 d2 d3 d5 e h1 h2 Article nr. D03, E x D04, E04, 2D x D045, E045, 2D x D05, E05, 2D x D052, E052, 2D x D060, E060, 2D x5, D064, E064, 2D x D066, E066, 2D x D07, D072, 2D x D08, D082, 2D x D09, D x Att:. Dirty filters reduce greatly the blower capacity. Regularly check the filter! Replace filter matting. For fine dust filter. Blower Dimensions in mm. Article nr. D03, E03 15x120x D04, E04, 2D04 15x120x D045, E045, 2D045 15x160x D05, E05, 2D05 15x225x D052, E052, 2D052 15x225x D060, E060, 2D060 15x250x D064, E064, 2D064 15x355x D066, E066, 2D066 15x460x D07, D072, 2D07 15x460x D08, D082, 2D08 15x460x D09, D092 15x665x bosaventilatoren bv 15