Table of Contents. ETP Steel Boxes and Covers

Transcription

1 FF Table of Contents CL-9 JB Bracket OCR2 4G5075S 50L 4OE-/2 4CS-/2 3GC-75 4SL-/2 8365N 4SJD-EK SX N 4SROB-EK M A 8486B VB GR2 FF Types Clamps and Brackets FF2 Miscellaneous Information FF3 Capacity of Steel Boxes and Covers FF4-FF5 4 Ceiling Fan Boxes FF6 4 Ceiling Fan Boxes with Support Bar Hangers FF7 4 Round Boxes FF8 3 4 Round and Octagonal Boxes and Covers FF9 3 4 Octagon Box Extension Ring FF9 4 Octagon Boxes - with Conduit Knock Outs FF0 4 Octagon Boxes - with Nonmetallic Sheathed Cable Clamps FF 4 Octagon Boxes - Armored Cable Clamps FF2 4 Octagon Box Extension Rings FF2 4 Octagon and Round Box Covers FF3 4 Square Boxes - with Conduit Knock Outs FF4-FF6 4 Square Boxes with Ground Wire FF7 4 Square Boxes - with Nonmetallic Cable Clamps FF8 4 Square Boxes - with Armored/Metal Clad Cable Clamps FF9 4 Square Boxes for Metal Stud Mounting FF20 4 Square Box Extension Rings and Covers FF2 4 Square Box Covers FF22-FF Square Boxes - with Conduit Knock Outs FF Square Boxes with Ground Wire FF Square Boxes - with Conduit Knock Outs FF Square Box Extension Rings FF Square Box Covers FF30-FF35 4 Square Boxes - Red FF36 4 Square Box Extension Rings and Thru Ring - Red FF37 4 Square Box Cover - Red FF Square Boxes - Red FF Square Box Extension Ring - Red FF Square Box Cover - Red FF39 Handy Boxes FF40-FF4 Handy Box Extension Rings FF4 Solid Gang Handy Boxes FF42 Handy Box Covers FF43 4 Octagon Concrete Boxes and Back Plates FF44 Bar Hangers FF45 Switch Boxes - with Conduit Knock Outs FF46-FF48 Switch Boxes - with Nonmetallic Cable Clamps FF49-FF5 Switch Boxes with Ground Wire FF52 Switch Boxes - with Armored/Metal Clad Cable Clamps FF53-FF54 Switch Boxes with Ground Wire FF55 Multigang Switch Boxes FF56 Multigang Switch Box Covers FF57 Masonry Boxes FF58-FF59 Accessories FF60

2 FF2 FF2 Styles of Clamps (installed parts only) CL-9 Clamp Type For nonmetallic cable CL-20 Clamp Type For nonmetallic cable CL-24 Clamp Type For nonmetallic cable CL-26 Clamp Type For nonmetallic cable CL-3 Clamp Type For armored cable (AC), metal-clad cable (MCI, MCI-A, MCC) and flexible metal conduit CL-25 Clamp Type For armored cable and flexible metal conduit Styles of Brackets (installed parts only except where noted with *) JB Bracket Plain NL Bracket Stud NL Bracket Snap-in Metal Stud Bracket MSC-OB Outlet Box Metal Stud Clip * for indiviual sale 892 LOX BOX Switch Box Supports * for indiviual sale Plain Offset Side Combination Brackets Barbed-Hook Vertical Plain Vertical Bracket Vertical Bracket with Stud Plain Vertical Bracket Plain Vertical Angle Bracket Offset Vertical Bracket Plain Vertical Bracket

3 FF3 Outlet and Switch Boxes: Material, Finish, Knockouts, Fire-Rated Assemblies, Compliances, Groundskeeper Raised Ground Boss Outlet and Switch Boxes Material and Finishes Material: AISI/SAE 008 Finish: Hot dip galvanized G60, 0.60 oz/sq ft Thickness: minimum FF3 Concentric and Eccentric Knockouts Boxes with concentric or eccentric knockouts are suitable for bonding without any additional bonding means where used in circuits above or below 250V. Unless otherwise noted all concentric or eccentric knockouts are ½ ¾ combinations. Use in Fire-Rated Assemblies Single and double gang metallic outlet and switch boxes are acceptable for use in two-hour fire rated walls. For additional information refer to the UL guide card information for metallic outlet boxes, QCIT. Groundskeeper Raised Ground Boss Groundskeeper raised ground feature on boss inside box provides one or two #0-32 tapped hole, allowing a 3/8 long green ground screw to be threaded into box without contacting mounting surface. Other boxes provided with flat ground tapped hole, except Plenum Boxes. See FF page 60 for ground screws, pigtails and accessories. Compliances UL Standard 54A NEMA OS- Federal Specifiation A-A5924 (formerly W-J-800)

4 FF4 Capacity of Steel Boxes & Covers FF4 The number of conductors and devices allowed in a box is limited by the cubic-inch capacity of the box. Unless superseded by local codes, Section 34-6 of the National Electrical Code governs the number of wires permitted. Section 34-6 is reproduced below: 34.6 Number of Conductors in Outlet, Device, and Junction Boxes, and Conduit Bodies. Boxes and conduit bodies shall be of sufficient size to provide free space for all enclosed conductors. In no case shall the volume of the box, as calculated in 34.6(A), be less than the fill calculation as calculated in 34.6(B). The minimum volume for conduit bodies shall be as calculated in 34.6(C). The provisions of this section shall not apply to terminal housings supplied with motors. FPN: For volume requirements of motor terminal housings, see Boxes and conduit bodies enclosing conductors 4 AWG or larger shall also comply with the provisions of (A) Box Volume Calculations. The volume of a wiring enclosure (box) shall be the total volume of the assembled sections and, where used, the space provided by plaster rings, domed covers, extension rings, and so forth, that are marked with their volume or are made from boxes the dimensions of which are listed in Table 34.6(A). () Standard Boxes. The volumes of standard boxes that are not marked with their volume shall be as given in Table 34.6(A). (2) Other Boxes. Boxes 650 cm3 (00 in.3) or less, other than those described in Table 34.6(A), and nonmetallic boxes shall be durably and legibly marked by the manufacturer with their volume. Boxes described in Table 34.6(A) that have a volume larger than is designated in the table shall be permitted to have their volume marked as required by this section. (B) Box Fill Calculations. The volumes in paragraphs 34.6(B)() through (B)(5), as applicable, shall be added together. No allowance shall be required for small fittings such as locknuts and bushings. () Conductor Fill. Each conductor that originates outside the box and terminates or is spliced within the box shall be counted once, and each conductor that passes through the box without splice or termination shall be counted once. A looped, unbroken conductor not less than twice the minimum length required for free conductors in shall be counted twice. The conductor fill shall be calculated using Table 34.6(B). A conductor, no part of which leaves the box, shall not be counted. Exception: An equipment grounding conductor or conductors or not over four fixture wires smaller than 4 AWG, or both, shall be permitted to be omitted from the calculations where they enter a box from a domed luminaire (fixture) or similar canopy and terminate within that box. (2) Clamp Fill. Where one or more internal cable clamps, whether factory or field supplied, are present in the box, a single volume allowance in accordance with Table 34.6(B) shall be made based on the largest conductor present in the box. No allowance shall be required for a cable connector with its clamping mechanism outside the box. (3) Support Fittings Fill. Where one or more luminaire (fixture) studs or hickeys are present in the box, a single volume allowance in accordance with Table 34.6(B) shall be made for each type of fitting based on the largest conductor present in the box. (4) Device or Equipment Fill. For each yoke or strap containing one or more devices or equipment, a double volume allowance in accordance with Table 34.6(B) shall be made for each yoke or strap based on the largest conductor connected to a device(s) or equipment supported by that yoke or strap.

5 FF5 Capacity of Steel Boxes & Covers FF5 Table 34.6(A) Metal Boxes Box Trade Size Minimum Volume Maximum Number of Conductors* mm in. cm 3 in (4 ¼) round/octagonal (4 ½) round/octagonal (4 2) round/octagonal (4 ¼) square (4 ½) square (4 2) square (4 ¼) square (4 ½) square (4 2) square (3 2 ½) device (3 2 2) device (3 2 2¼) device (3 2 2½) device (3 2 2¾) device (3 2 3½) device (4 2 ½) device (4 2 ) device (4 2 2) device (3¾ 2 2½) masonry box/gang (3¾ 2 3½) masonry box/gang min depth FS single cover/gang (¾) min depth FD single cover/gang (2) min depth FS multiple cover/gang (¾) min depth FD multiple cover/gang (2) *Where no volume allowances are required by 34.6(B)(2) through (B)(5). Table 34.6(B) Volume Allowance Required per Conductor Free Space Within Box for Each Conductor Size of Conductor (AWG) cm 3 in Reproduced with permission NFPA. - All National Electrical Code references are from the 2005 edition.

6 FF6 4 Round Ceiling Fan Boxes FF6 All boxes provided with plastic non-metallic sheathed cable connector, hardware and instruction sheet. Complies with NEC for up to 35 lbs. of ceiling fan load or 70 lbs. of fi xture load. FFS-4CL Bracket, Offset or Cubic Std. Number Depth Clamp Type Expansion Knockouts Inches Pkg. FFS-4CL /2 (2) / Octagonal Ceiling Fan Boxes All boxes provided with plastic non-metallic sheathed cable connector, hardware and instruction sheet. Complies with NEC for up to 35 lbs. of ceiling fan load or 70 lbs. of fi xture load. NM Clamp installed in all -/2 and 2-/8 boxes. AC/MC Cable Clamp is also provided and can be used to replace NM sheathed cable clamp. FFS-56L FFS-56LD FFS-56LD-VB-NW Bracket, Offset or Cubic Std. Number Depth Clamp Type Expansion Knockouts Inches Pkg. FFS-56L -/2 AC/MC, NM (3) / FFS-56LD 2-/8 AC/MC, NM (3) / FFS-56LD-VB-NW 2-/8 AC/MC, NM FB, /2 (2) /

7 FF7 4 Round Ceiling Fan Boxes with Support Bar Hangers Box provided with plastic non-metallic sheathed cable connector, hardware and instruction sheet. Complies with NEC for up to 35 lbs. of ceiling fan load or 70 lbs. of fi xture load. FF7 FFS-4CL-NBH Bracket, Offset or Cubic Std. Number Depth Clamp Type Expansion Knockouts Inches Pkg. FFS-4CL-NBH /2 NBH, 6 to 24 (2) / Note: NBH is for new construction. 4 Octagonal Ceiling Fan Boxes with Support Bar Hangers All boxes provided with plastic non-metallic sheathed cable connector, hardware and instruction sheet. Complies with NEC for up to 35 lbs. of ceiling fan load or 70 lbs. of fi xture load. NM Clamp installed in all -/2 and 2-/8 boxes. AC/MC Cable Clamp is also provided and can be used to replace NM sheathed cable clamp. FFS-56L-NBH FFS-56L-OBH FFS-56LD-NBH FFS-56LD-OBH Bracket, Offset or Cubic Std. Number Depth Clamp Type Expansion Knockouts Inches Pkg. FFS-56L-NBH -/2 AC/MC, NM NBH, 6 to 24 (3) / FFS-56L-OBH -/2 AC/MC, NM OBH, 6 to 24 (3) / FFS-56LD-NBH 2-/8 AC/MC, NM NBH, 6 to 24 (3) / FFS-56LD-OBH 2-/8 AC/MC, NM OBH, 6 to 24 (3) / Note: NBH is for new construction. OBH is for rehabbing old construction.

8 FF8 3 4 Round Boxes With Nonmetallic Sheathed Cable Clamps FF8 Number Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 50LC* CL (3) (365) (4) LC 2 Deep 50L (3) (4) 2 32 * Not UL Listed 50L 2 Deep 3 4 Round Covers For 3 /4 Octagon and Round Boxes Number Depth Cubic In. Knockout Wt. Lbs. Std. (Universal No.) (inches) Cap. Description Per 00 Pkg. 830A Flat 0.0 Blank 7 50 (24C) 8320 Flat KO 7 50 (24C6) 830A /4 Cover Hole Centerline. 4 Round Box With Conduit Knockouts in Bottom Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. 4CL (5) (56) 4CL 2 Deep 3-/2 Cover Hole Centerline.

9 FF9 3 4 Octagonal Boxes With Conduit Knockouts FF9 Number Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 3O-/ (4) 2 -- () (245 2) 3O-/2 2 Deep With Nonmetallic Sheathed Cable Clamps Number Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 560L 2.9 CL-26 (2) 2 (4) 2 32 () (245-N) (4) LXE 2.9 CL-26 (2) 2 (4) 2 32 () (245-NE) (4) LVB 2.9 CL-26 () 2 (4) 2 32 () (245NF) (4) L 2 Deep Two nail holes each end 2-3/4 Cover Hole Centerline. 560LXE 2 Deep Plaster Ears 560LVB 2 Deep Plain Vertical bracket set back Octagon Box Extension Ring With Conduit Knockouts Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. 3OE-/ (4) (255 2) 2-3/4 Cover Hole Centerline. 3OE-/2 2 Deep

10 FF0 4 Octagon Boxes With Conduit Knockouts FF0 4O-/2 2 Deep 4O-3/4 2 Deep 4O-SPL 2 Deep 4OJB-/2 2 Deep JB Bracket set flush, gauging notches 3 8 & 2 4OD-/2 2 8 Deep 4OD-3/4 2 8 Deep 4OD-SPL 2 8 Deep 4OVB-/2 2 Deep Vertical bracket with stud set back 5 8 Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. 4O-/ (4) 2 -- (5) (545 2) 4O-3/ (4) (3) ( ) (2) 3 4 4O-SPL (2) 2 -- (3) (545SPL) (2) 3 4 (2) 3 4 4OJB-/ (4) 2 -- (5) (545J 2) 4OD-/ (4) 2 -- (5) (547 2) 4OD-3/ (4) (3) ( ) (2) 3 4 4OD-SPL (2) 2 -- (3) (547SPL) (2) 3 4 (2) 3 4 4OVB-/ (3) 2 -- (5) (545F 2) SX5-40-/ (4) 2 -- (4) SX5-40-/2 2 Deep 40 2 box on SX5 stud bar hanger adjusts from 2 to /2 Cover Hole Centerline.

11 FF 4 Octagon Boxes With Nonmetallic Sheathed Cable Clamps FF 56L 2 Deep 56N 2 Deep Four nail holes each end 56LJB 2 Deep JB Bracket set flush, Gauging notches 3 8 & 2 56LVB 2 Deep Bracket set back LXE 2 Deep Plaster ears 56LD 2 8 Deep 56LDJB 2 8 Deep JB Bracket set back Gauging notches set back 3 8 & 2 Number Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 56L CL-26 (2) 2 (4) 2 32 () (545) 56N CL-26 (2) 2 (4) 2 32 () (545N) 56LJB CL-26 (2) 2 (4) 2 32 () (545JN) 56LVB CL-26 () 2 (4) 2 32 () (545FN) 56LXE CL-26 (2) 2 (4) 2 32 () (545NE) 56LD CL-26 (2) 2 (4) 2 32 () (547N) 56LDJB CL-26 (2) 2 (4) 2 32 () (547JN) SX8-56L CL-26 (2) 2 (4) SX5-56L CL-26 (2) 2 (4) /2 Cover Hole Centerline. SX8-56L 2 Deep 56L box on SX8 clip bar Hanger adjusts from 2 to 8 2 SX5-56L 2 Deep 56L box on SX5 stud bar Hanger adjusts from 2 to 8 2

12 FF2 4 Octagon Boxes With Armored Cable Clamps FF2 55L 2 Deep Two nail holes each end 55LJB 2 Deep JB Bracket set flush, Gauging Notches 3 8 & 2 55LDJB 2 8 Deep JB Bracket set back, Gauging Notches 3 8 & 2 Number Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 55L CL-25 (2) 2 (4) 2 32 () (545X) (4) LJB CL-25 (2) 2 (4) 2 32 () (4) LDJB CL-25 (2) 2 (4) 2 32 () (4) 2 32 SX5-55L CL-25 (2) 2 (4) (4) /2 Cover Hole Centerline. 4 Octagon Box Extension Rings With Conduit Knockouts SX5-55L 2 Deep 55L box on SX5 stud bar Hanger adjusts from 2 to 8 2 4OE-/2 2 Deep 4OE-3/4 2 Deep 4OE-SPL 2 Deep Number Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 4OE-/ (4) (555 2) 4OE-3/ (4) ( ) 4OE-SPL (2) (555-SPL) (2) /2 Cover Hole Centerline.

13 FF3 4 Octagon and Round Covers For 4 Octagon and Round Boxes FF3 8409A 2 Raised Raised LR 8420LR Number Depth Cubic In. Knockout Wt. Lbs. Std. (Universal No.) (inches) Cap. Description Per 00 Pkg. 8409A 3.5 Ears C to C (54C3 2) Raised 4.5 Ears C to C (54C3 3 4) 8403 Flat 0.0 Blank (540) 843 Flat Knockout (54C6) 849LR Flat 0.0 One Single Flush (54-S) Receptacle 3 32 D 8420LR Flat 0.0 Duplex Receptacle (54-D) 3-/2 Cover Hole Centerline.

14 FF4 4 Square Boxes - 2 Deep With Conduit Knockouts FF4 4SL-/2 4 Deep, Drawn 4S-/2 2 Deep, Welded 4S/2-DR 2 Deep, Drawn 4S-3/4 2 Deep, Welded 4S3/4-DR 2 Deep, Drawn 4SEK 2 Deep, Welded 4S-SPL 2 Deep, Welded 4S-SPL-DR 2 Deep, Drawn Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. 4SL-/ (0) 2 -- (5) (524 2) 4S-/ (2) 2 -- (4) (525 2) 4S/2-DR (2) 2 -- (5) (525 2) 4S-3/ (8) (2) ( ) (2) 3 4 4S3/4-DR (8) (2) ( ) (2) 3 4 4SP Plenum Box 2 Deep, Drawn Without any holes and with reset knockouts (Screws supplied with cover, number 8465P) 4SEK (8) 2 -- (2) (4)Eccentric KO (2)Eccentric KO 4S-SPL (8) 2 -- (2) (525-SPL) (4) (2) 3 4 4S-SPL-DR (8) 2 -- (2) (525-SPL) (4) 3 4 (2) 3 4 4SP (8) 2 -- (3) (4) 3 4 (2) 3 4 Red Box available on FF36

15 FF5 4 Square Boxes - 2 Deep With Conduit Knockouts FF5 4SVB3/4PL 2 Deep, Welded Plain vertical bracket 4SVB-EK-PL 2 Deep, Welded Plain vertical bracket 4SOB-EK 2 Deep, Welded 3 8 Offset vertical bracket 4SAB-EK 2 Deep, Welded Vertical bracket with barbed hooks Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. 4SVB3/4PL (6) (2) (525-V 3 4) (2) 3 4 4SVB-EK-PL (6) 2 -- (2) (3)Eccentric KO (2)Eccentric KO 4SOB-EK (6) 2 -- (2) (3)Eccentric KO (2)Eccentric KO 4SAB-EK (6) 2 -- (2) 2 (3)Eccentric KO (2)Eccentric KO SB-EK (6) 2 -- (2) (525-B 2) (3)Eccentric KO (2)Eccentric KO 4SB-EK 2 Deep, Welded Stud NL Bracket set flush with front of box Red Box available on FF36

16 FF6 4 Square Boxes Deep With Conduit Knockouts FF6 4SD-EK 2 8 Deep, Welded 4SD-3/4 2 8 Deep, Welded 4SD- 2 8 Deep, Welded Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. 4SDVB-EK-PL 2 8 Deep, Welded Plain vertical bracket set flush with front of box 4SD-EK (8) 2 -- (2) (4)Eccentric KO (2)Eccentric KO 4SD-3/ (8) (3) ( ) (2) 3 4 4SD (8) -- (3) (527-) (2) 3 4 4SDVB-EK-PL (6) 2 -- (2) 2 (3)Eccentric KO (2)Eccentric KO SD-SPL (8) 2 -- (3) (527-SPL) (4) 3 4 (2) 3 4 4SPD (8) 2 -- (3) (4) 3 4 (2) 3 4 4SD-SPL 2 8 Deep, Welded Red Box available on FF36 4SPD Plenum Box 2 8 Deep, Drawn Without any holes and with reset knockouts (Screws supplied with cover, catalog number 8465P)

17 FF7 4 Square Boxes with Ground Wire FF7. Provided with ground screw and 0 long No. 2 AWG solid, insulated ground wire. 4SEKP 2 Deep, Welded 4S-SPL-DRP 2 Deep, Drawn 4SVB-EK-PLP 2 Deep, Welded Plain vertical bracket 4SD-EKP 2 8 Deep, Welded 4SDVB-EK-PLP 2 8 Deep, Welded Plain vertical bracket set flush with front of box 4SD-SPLP 2 8 Deep, Welded 4SRVB-EK-PLP 2 Deep, Welded Plain vertical bracket 4SX-EKP 2 Deep, Welded Number Depth (inches) Cubic Inch Capacity Type Clamp Knockout Description Sides Ends Bottom Wt. Lbs. Per 00 With Conduit Knockouts 4SEKP (8) 2 -- (2) (4)Eccentric KO (2)Eccentric KO 4S-SPL-DRP (8) 2 -- (3) (4) 3 4 (2) 3 4 4SVB-EK-PLP (6) 2 -- (2) (3)Eccentric KO (2)Eccentric KO 4SD-EKP (8) 2 -- (2) (4)Eccentric KO (2)Eccentric KO 4SDVB-EK-PLP (6) 2 -- (2) 2 (3)Eccentric KO (2)Eccentric KO SD-SPLP (8) 2 -- (3) (4) 3 4 (2) 3 4 With Nonmetallic Sheathed Cable Clamps 4SRVB-EK-PLP CL-26 (2) 2 (4) 2 32 () ()Eccentric KO With Armored Cable / Metallic Clad Cable Clamps 4SX-EKP CL-3 (4) 2 (4) 2 32 ( ) (2)Eccentric KO Std. Pkg.

18 FF8 4 Square Boxes With Nonmetallic Sheathed Cable Clamps FF8 4SR-EK 2 Deep, Welded Nail holes 4SRB-EK 2 Deep, Welded Stud NL Bracket set flush with front of box 4SRVB-EK-PL 2 Deep, Welded Plain vertical bracket 4SROB-EK 2 Deep, Welded 3 8 offset vertical bracket set flush with front of box 4SRAB-EK 8 Deep, Welded Vertical bracket with barbed hooks 4SRD 2 8 Deep, Drawn Nail holes 4SRDVB-PL 2 8 Deep, Drawn Plain vertical bracket flush with front of box Number Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 4SR-EK CL-26 (4) 2 (4) 2 32 () (2)Eccentric KO 4SRB-EK CL-26 (2) 2 (4) 2 32 () ()Eccentric KO 4SRVB-EK-PL CL-26 (2) 2 (4) 2 32 () ()Eccentric KO 4SROB-EK CL-26 (2) 2 (4) 2 32 () ()Eccentric KO 4SRAB-EK CL-26 (2) 2 (4) 2 32 () ()Eccentric KO 4SRD CL-26 (6) 2 (4) 2 32 () SRDVB-PL CL-26 (3) 2 (4) 2 32 ()

19 FF9 4 Square Boxes With Armored Cable / Metal Clad Cable / Flexible Metal Conduit Clamps FF9 4SX-EK 2 Deep, Welded 4SXAB-EK 2 Deep, Welded Vertical bracket with barbed hooks 4SXVB-EK-PL 2 Deep, Welded Plain vertical bracket 4SXB-EK-PL 2 Deep, Welded Plain NL bracket set flush with front of box 4SXD 2 8 Deep, Drawn 4SXDVB-PL 2 8 Deep, Drawn Plain vertical bracket set flush with front of box Depth Number Cubic Inch Type Knockout Description Wt. Lbs. Std. (inches) (Universal No.) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 4SX-EK CL-3 (4) 2 (4) 2 32 () (525VB) (2)Eccentric KO 4SXAB-EK CL-3 (2) 2 (4) 2 32 () (525VB) ()Eccentric KO 4SXVB-EK-PL CL-3 (2) 2 (4) 2 32 () ()Eccentric KO 4SXB-EK-PL CL-3 (2) 2 (4) 2 32 () ()Eccentric KO 4SXD CL-3 (6) 2 (4) 2 32 () SXDVB-PL CL-3 (3) 2 (4) 2 32 ()

20 FF20 4 Square Boxes with Snap-In Brackets For 2 /2 and 3 5 /8 Metal Studs FF20 4S/2-SB2-/2 2 Deep, Welded For 2 2 metal stud 4S/2-SB3-5/8 2 Deep, Welded For metal stud 4S-SPL-SB2-/2 2 Deep, Welded For 2 2 metal stud 4S-SPL-SB3-5/8 2 Deep, Welded For metal stud 4SR-SB2-/2 2 Deep, Welded For 2 2 metal stud 4SR-SB3-5/8 2 Deep, Welded For metal stud 4SX-SB2-/2 2 Deep, Welded For 2 2 metal stud 4SX-SB3-5/8 2 Deep, Welded For metal stud Stud Depth Size Cubic Inch Type Knockout Description Wt. Lbs. Std. Number (inches) (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. With Conduit Knockouts 4S/2-SB2-/ (9) 2 -- (5) S/2-SB3-5/ (9) 2 -- (5) S-SPL-SB2-/ (6) 2 -- (3) (3) 3 4 (2) 3 4 4S-SPL-SB3-5/ (6) 2 -- (3) (3) 3 4 (2) 3 4 With Nonmetallic Sheathed Cable Clamps 4SR-SB2-/ CL-26 (3) 2 (4) 2 32 () SR-SB3-5/ CL-26 (3) 2 (4) 2 32 () With Armored Cable/Metal Clad Cable Clamps 4SX-SB2-/ CL-3 (3) 2 (4) 2 32 () SX-SB3-5/ CL-3 (3) 2 (4) 2 32 ()

21 FF2 4 Square Box Extension Rings and Thru-Ring With Conduit Knockouts FF2 4SE-/2 Extension Ring 2 Deep, Drawn Top: Two 8-32 screws Bottom: Two slide-on slots 4SE-3/4 Extension Ring 2 Deep, Drawn Top: Two 8-32 screws Bottom: Two slide-on slots 4SSBE-SPL Extension Ring 2 Deep, Welded Top: Two 8-32 screws Bottom: Cutout for switch or handy box 4SES Combo Extension-Thru-Ring 2 Deep, Drawn Top: Two 8-32 screws Bottom: Two 8-32 screws and two slide-on slots Number Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 4SE-/ (2) SE-3/ (8) ( ) 4SSBE-SPL (8) (4) 3 4 4SES (6) (535 2) (4) 3 4 Red Box available on FF37 4 Square Covers Raised Surface Covers Number Depth Cubic Inch WT. Lbs. Std. (Universal No.) (inches) Capacity Description Per 00 Pkg Blank One Toggle Switch (52-T) One GFCI Device One Single Flush Receptacle 3 32 D Two Single Flush Receptacles 3 32 D Opening Openings

22 FF22 4 Square Covers Raised Surface Covers FF N Opening 837N 8373N N Opening Opening Opening Number Depth Cubic Inch Wt. Lbs. Std. (Universal No.) (inches) Capacity Description Per 00 Pkg. 8365N One Duplex Flush Receptacle* Two Toggle Switches (52-2T) One Toggle Switch, One Single Flush Receptacle 3 32 D 837N Two Duplex Flush Receptacles* N One Duplex Flush, One GFCI Device* One Toggle Switch, One GFCI Device N One Toggle Switch, One Duplex Flush* A Single Flush Receptacle D One Single Flush Receptacle 2 2 D A Twist Lock Receptacle 9 32 D (52R54) *Extra mounting screws and nuts provided.

23 FF23 4 Square Covers Flat Covers and Single Device - Plaster Rings/Mud Rings FF Blank KO 8465P Plenum box cover with gasket and screws 8468WB 4 Raised 8468F Flat 8468B 4 Raised 8468A 8468C 5 8 Raised Raised 8466A Raised Number Depth Cubic Inch Wt. Lbs. Std. (Universal No.) (inches) Capacity Description Per 00 Pkg. Flat Covers 8465 Flat -- Blank (52C) 8474 Flat -- 2 KO (52C6) 8465P Flat -- Blank Plenum Box Cover Gasketed with Two Captive Screws Raised Single Device 8468WB 4.5 Single Device (52C36) 8468F Flat 0 Single Device (52C-0) 8468B Single Device (52C62) 8468A Single Device - Drawn (52C3) 8468C Single Device - Drawn (52C4-5 8) Single Device - Drawn (52C4) 8466A 7.5 Single Device - Drawn (52C5) Single Device - Drawn (52C6) Red Box available on FF37

24 FF24 4 Square Covers Single Device - Ceiling Plaster Rings/Mud Rings FF24 846E 4 Raised 846A Raised 846B 3 4 Raised 846C Raised 846D 4 Raised Number Depth Cubic Inch Wt. Lbs Std. (Universal No.) (inches) Capacity Description Per 00 Pkg. 846E 4.5 Ears C to C Open (52C3-4) 846A Ears C to C Open (52C3-2) Ears C to C Open (52C) 846B Ears C to C Open (52C3-3 4) 846C 7.0 Ears C to C Open (52C3-) 846D Ears C to C Open (52C3-4)

25 FF25 4 Square Covers Double Device - Plaster Rings/Mud Rings FF F Flat 8470WB 4 Raised 8470B 4 Raised 8470A 8470C 5 8 Raised Raised 8469A Raised 8469B 4 Raised Number Depth Cubic Inch Wt. Lbs. Std. (Universal No.) (inches) Capacity Description Per 00 Pkg. 8470F Flat 0.0 Double Device (52C-00) 8470WB Double Device (52C37) 8470B Double Device (52C20) 8470A Double Device (52C7) 8470C Double Device (52C8 5 8) Double Device (52C8) 8469A 2.0 Double Device (52C9) 8469B Double Device (52C2)

26 FF26 4 Square Tile Covers Single Device and Double Device - Plaster Rings/Mud Rings FF Raised Raised Raised Raised Raised Number Depth Cubic Inch Wt. Lbs. Std. (Universal No.) (inches) Capacity Description Per 00 Pkg. Single Device Single Device (52C49-2) Single Device (52C49-3 4) Single Device (52C49-) Single Device (52C49-4) Single Device (52C50-2) Single Device (52C5-2) Double Device Double Device (52C52-2) Double Device (52C52-3 4) Double Device (52C5-) Double Device (52C52-4) Double Device (52C53-2) Double Device (52C54-2) Raised Raised Raised

27 FF Square Boxes With Conduit Knockouts FF27 4SJ-3/4 2 Deep, Welded 4SJ-EK 2 Deep, Welded 4SJD-3/4 2 8 Deep, Welded 4SJD-EK 2 8 Deep, Welded 4SJD-3/4-2 8 Deep, Welded 4SJD- 2 8 Deep, Welded 4SJD--/4 2 8 Deep, Welded 4SPJD Plenum Box 2 8 Deep, Drawn (Screws supplied with cover, catalog number 8487P) Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. 4SJ-3/ (8) (2) ( ) (2) 3 4 4SJ-EK (0)Eccentric KO -- () (725-SPL) () 3 4 (2)Eccentric KO 4SJD-3/ (0) (2) ( ) (2) 3 4 4SJD-EK (2)Eccentric KO -- () (727-SPL) () 3 4 (2)Eccentric KO 4SJD-3/ (4) (2) ( SPL) (4) (2) 3 4 4SJD (8) -- (2) (727-) (2) 3 4 4SJD--/ (6) 4 -- (2) (727-4) (2) 3 4 4SPJD (4) 2 -- (3) (6) 3 4 (2) 3 4 Red Box available on FF37

28 FF28 FF Square Boxes with Ground Wire With Conduit Knockouts. Provided with ground screw and 0 long No. 2 AWG solid, insulated ground wire. 4SJ-EKP 2 Deep, Welded 4SJD-EKP 2 8 Deep, Welded Number Depth (inches) Cubic Inch Capacity Knockout Description Sides Ends Bottom Wt. Lbs. Per 00 Std. Pkg. 4SJ-EKP (0)Eccentric KO -- () () 3 4 (2)Eccentric KO 4SJD-EKP (2)Eccentric KO -- () () 3 4 (2)Eccentric KO

29 FF Square Boxes With Conduit Knockouts FF29 4SJD-EK-VB 2 8 Deep, Welded Offset vertical bracket flush with front of box 4SJD--VB 2 8 Deep, Welded Offset vertical bracket flush with front of box Groundskeeper Raised ground feature on boss inside box provides two #0-32 tapped hole, allowing a 3/8 long green ground screw to be threaded into box without contacting mounting surface. Other boxes provided with flat ground tapped hole, except Plenum Boxes. See FF page 60 for ground screws, pigtails and accessories. Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. 4SJD-EK-VB (9)Eccentric KO -- () () 3 4 (2)Eccentric KO 4SJD--VB (6) -- (2) (2) Square Box Extension Rings With Conduit Knockouts 4SJDE-/2-3/4 2 8 Deep, Drawn 8-32 tapped holes and slide-on screw slots in bottom 4SJDE- 2 8 Deep, Drawn 8-32 tapped holes and slide-on screw slots in bottom Depth Cubic Inch Knockout Description Wt. Lbs. Std. Number (inches) Capacity Sides Ends Bottom Per 00 Pkg. 4SJDE-/2-3/ (4) (6) 3 4 4SJDE (8) Red Box available on FF38

30 FF Square Covers Raised Surface FF A 8484BN N 8495 Depth Cubic Inch Wt. Lbs. Std. Number (inches) Capacity Description Per 00 Pkg One GFCI Device A One Toggle Switch, One GFCI Device BN One Duplex Receptacle, One GFCI Device* One Toggle Switch Two Toggle Switches N One Duplex Receptacle* Blank *Extra mounting screws and nuts provided.

31 FF3 4 6 Square Covers Raised Surface FF3 8492N 8493N Opening Opening Opening Opening Opening Number Depth Cubic Inch Wt. Lbs. Std. (Universal No.) (inches) Capacity Description Per 00 Pkg. 8492N Two Duplex Receptacles* N One Toggle Switch, One Duplex Receptacle* Single Receptacle 3 32 D Single Receptacle 9 32 D Twist Lock Receptacle 3 4 D Single Receptacle D Single Receptacle 2 2 D *Extra mounting screws and nuts provided.

32 FF Square Covers Flat and Single Device - Ceiling Plaster Rings/Mud Rings FF Flat 8487K Flat 8487P Plenum box cover with gasket and screws 8488A 8488B 5 8 Raised 8488C 3 4 Raised 8488D Raised 8488E 4 Raised Number Depth Cubic Inch Wt. Lbs. Std. (Universal No.) (inches) Capacity Description Per 00 Pkg Flat - Blank (72C) 8487K Flat - One 2 Knockout (72C6) 8487P Flat - Blank Plenum Box Cover Gasketed with Four Captive Screws Single Device 8488A Ears C to C B Ears C to C C Ears C to C D 7.0 Ears C to C E Ears C to C Red Box available on FF39

33 FF Square Covers Single Device - Plaster Rings/Mud Rings FF B 4 Raised 8485A 8485C 5 8 Raised Raised 8485D Raised 8485E 4 Raised Number Depth Cubic Inch Wt. Lbs. Std. (Universal No.) (inches) Capacity Description Per 00 Pkg. 8485B Single Device A Single Device (72C3) 8485C Single Device Single Device (72C4) 8485D 6.3 Single Device E Single Device

34 FF Square Covers Double Device - Plaster Rings/Mud Rings FF F Flat 8486B 4 Raised 8486A 8486C 5 8 Raised Raised 8486D Raised 8486E 4 Raised Number Depth Cubic Inch Wt. Lbs. Std. (Universal No.) (inches) Capacity Description Per 00 Pkg. 8486F Flat 0.0 Double Devices B Double Devices A Double Devices (72C7) 8486C Double Devices Double Devices D.3 Double Devices E Double Devices

35 FF35 FF Square Tile Covers Single Device and Double Device - Plaster Rings/Mud Rings Raised Raised Raised Raised Raised Depth Cubic Inch Wt. Lbs. Std. Number (inches) Capacity Description Per 00 Pkg. Single Device Single Device Single Device Single Device Single Device Double Device Double Devices Double Devices Double Devices

36 FF36 FF36 4 Square Boxes Red With Conduit Knockouts For fi re alarm circuits. Red powder coat fi nish. 4S-/2RD 2 Deep, Welded 4S-SPL-DRRD 2 Deep, Drawn 4SVB-EK-PLRD 2 Deep, Welded Plain vertical bracket 4SD-EKRD 2 8 Deep, Welded 4SDVB-EK-PLRD 2 8 Deep, Welded Plain vertical bracket set flush with front of box 4SD-SPLRD 2 8 Deep, Welded Number Depth (inches) Cubic Inch Capacity Knockout Description Sides Ends Bottom Wt. Lbs. Per 00 Std. Pkg. 4S-/2RD (2) 2 -- (4) S-SPL-DRRD (8) 2 -- (3) (4) 3 4 (2) 3 4 4SVB-EK-PLRD (6) 2 -- (3) (3)Eccentric KO (2)Eccentric KO 4SD-EKRD (8) 2 -- (3) (4)Eccentric KO (2)Eccentric KO 4SDVB-EK-PLRD (6) 2 -- (3) 2 (3)Eccentric KO (2)Eccentric KO SD-SPLRD (8) 2 -- (3) (4) 3 4 (2) 3 4

37 FF37 FF37 4 Square Box Extension Rings and Thru-Ring Red With Conduit Knockouts For fi re alarm circuits. Red powder coat fi nish. 4SSBE-SPLRD Extension Ring 2 Deep, Welded; Top: Two 8-32 screws Bottom: Cutout for switch or handy box 4SESRD Combo Extension-Thru-Ring 2 Deep, Drawn; Top: Two 8-32 screws Bottom: Two 8-32 screws and two slide-on slots Number Depth Cubic Knockout Description Wt. Lbs. Std. Type Clamp (inches) Inch Capacity Sides Ends Bottom Per 00 Pkg. 4SSBE-SPLRD (8) (4) 3 4 4SESRD (6) (4) Square Flat Cover Red Flat Cover For fi re alarm circuits. Red powder coat fi nish. Number Depth (inches) Cubic Inch Capacity Description Wt. Lbs. Per 00 Std. Pkg. 8465RD Blank 8465RD Flat -- Blank

38 FF38 FF Square Boxes Red With Conduit Knockouts For fi re alarm circuits. Red powder coat fi nish. 4SJD-EKRD 2 8 Deep, Welded Number Depth (inches) Cubic Inch Capacity Knockout Description Sides Ends Bottom Wt. Lbs. Per 00 Std. Pkg. 4SJD-EKRD (2)Eccentric KO -- () () 3 4 (2)Eccentric KO 4 6 Square Box Extension Rings Red With Conduit Knockouts For fi re alarm circuits. Red powder coat fi nish. 4SJDE-/2-3/4RD 2 8 Deep, Drawn 8-32 tapped holes and slide-on screw slots in bottom Number Depth (inches) Cubic Inch Capacity Knockout Description Sides Ends Bottom Wt. Lbs. Per 00 Std. Pkg. 4SJDE-/2-3/4RD (4) (6) 3 4

39 FF39 FF Square Covers Red Flat Cover For fi re alarm circuits. Red powder coat fi nish. Number Depth (inches) Cubic Inch Capacity Description Wt. Lbs. Per RD Flat - Blank Std. Pkg. 8487RD Flat

40 FF40 Handy Boxes 3 3 /4 x /2 and 4 x 2 /8 with Conduit Knockouts FF40 4SS 2 Deep, Drawn 4CSL-/2 4 Deep, Drawn 4SSLS-/2 2 Deep, Drawn 4CS-/2 7 8 Deep, Drawn 4CS-3/4 7 8 Deep, Drawn 4CSVB-/2 7 8 Deep, Drawn Plain vertical bracket set back 5 8 4CSX-/2PL 7 8 Deep, Drawn Plain vertical angle bracket set back 5 8 4SSL-/2 2 8 Deep, Welded 4SSL/2-DR 2 8 Deep, Drawn 4SSL-3/4 2 8 Deep, Welded Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. 3 3 /4 x /2 With Conduit Knockouts 4SS (6) 2 (2) 2 (3) x 2 /8 With Conduit Knockouts 4CSL-/ (6) 2 (2) 2 (3) (5836-2) 4SSLS-/ (6) 2 (2) 2 (3) (5835-2) 4CS-/2* (6) 2 (2) 2 (2) (5836-2) 4CS-3/ (4) 3 4 (2) 3 4 () ( ) 4CSVB-/ (3) 2 (2) 2 (2) (5836-V 2) 4CSX-/2PL (3) 2 (2) 2 (3) (5836-A 2) 4SSL-/ (6) 2 (2) 2 (2) (5837-2) 4SSL/2-DR (6) 2 (2) 2 (2) (5837-2) 4SSL-3/ (4) 3 4 (2) 3 4 (2) ( ) 4SSL3/4-DR (4) 3 4 (2) 3 4 () ( ) * Add suffix -C for CSA Certification 4SSL3/4-DR 2 8 Deep, Drawn

41 FF4 Handy Boxes 4 x 2 /8 with Conduit Knockouts FF4 4SSLVB-/2 2 8 Deep, Welded Plain vertical bracket set back 3 4 4SSLX-/2PL 2 8 Deep, Welded Plain vertical angle bracket set back 5 8 4SSLD-/2 2 2 Deep, Drawn 4SSLE-/2 2 Deep, Drawn 4CSE/2 7 8 Deep, Drawn Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. With Conduit Knockouts 4SSLVB-/ (3) 2 (2) 2 (2) (5837-F 2) 4SSLX-/2PL (3) 2 (2) 2 (2) SSLD-/ (6) 2 (2) 2 (3) (5835-2) Extension Ring for 4 x 2 /8 Handy Box with Conduit Knockouts 4SSLE-/ (6) 2 (2) (5935) With Slide on 4CSE/ (6) 2 (2) (5936-2) With Slide on

42 FF42 Handy Boxes 4 Solid Gang with Conduit Knockouts FF42 33APFB-/2 2 2 Deep, Drawn Three Gang Wide Plain offset side combination Bracket set back 2 34APFB-/2 2 2 Deep, Drawn Four Gang Wide Plain offset side combination Bracket set back 2 Knockout Description Number Depth (Inches) Cubic Inch Capacity Sides Ends Bottom Wt. Lbs. Per 00 Std. Pkg. 33APFB-/ (2)Concentric KO (6)Concentric KO (6)Concentric KO APFB-/ (2)Concentric KO (8)Concentric KO (8)Concentric KO Handy Boxes 4 /8 x 2 3 /8 with Conduit Knockouts 80-/2 3 4 Deep, Drawn 8-/2 2 4 Deep, Drawn 84E 2 Deep, Drawn Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. With Conduit Knockouts 80-/ (6) 2 (2) 2 (2) (6836-2) 8-/ (6) 2 (2) 2 (2) (6837-2) Extension Ring for 4 8 x Handy Box with Conduit Knockouts 84E (6) 2 (2) (6935) With Slide on

43 FF43 FF43 Handy Box Covers For 3 3 /4 x /2, 4 x 2 /8 and 4 /8 x 2 3 /8 Boxes Number Wt. Lbs. Ctn. Std. (Universal No.) Description Per 00 Qty. Pkg. For x 2 4SS Box 2520 Blank (48C) 2520 Number Wt. Lbs. Ctn. Std. (Universal No.) Description Per 00 Qty. Pkg. For 4 x 2 8 Boxes 2540 Blank (58C) 2555 One /2 Knockout (58C6) 2538 Single Receptacle 9 32 D (58C4) Single Receptacle 3 32 D (58C5) 250 Duplex Receptacle (58C7) 2594 One Toggle Switch (58C30) Number Wt. Lbs. Ctn. Std. (Universal No.) Description Per 00 Qty. Pkg. For 4 8 x Boxes 80A Blank (68C-) 80T One Toggle Switch (68C-30) 80G GFI Receptacle A 80T 80G 80W Duplex Receptacle (68C-7) 80X Single Receptacle 3 32 D (68C-5) 80W 80X

44 FF44 4 Octagon Concrete Boxes* With /2 and 3 /4 Single Row Conduit Knockouts FF44 OCR2 OCR2-/2 OCR3 OCR3-/2 OCR4 Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. OCR (4) (5453) (4) 3 4 OCR2-/ (4) (5454) (4) 3 4 OCR (4) (5455) (4) 3 4 OCR3-/ (4) (5456) (4) 3 4 OCR (4) (5457) (4) 3 4 Not rated for ceiling fan usage. 4 Octagon Back Plates No Stud and with 3 /8 Fixture Stud Number Depth Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Sides Ends Bottom Per 00 Pkg. No Stud OCP Flat (3) (5472) (2) 3 4 OCP No stud OCP-3/8 3 8 Fixture stud With 3/8 Fixture Stud OCP-3/8 Flat (2) (5477) (2) 3 4 Material is 4 gauge galvanized steel. *Rings furnished with screws for back plates. Back plate mounting holes are designed to slide onto ring screws.

45 FF45 Adjustable Bar Hangers With Slide-on Clip/ With Slide-on Stud FF45 SX8 Clip SX26 Clip SX5 Stud SX60 Stud Wt. Lbs. Std. Number Description Per 00 Pkg. With Slide-on Clip SX8 Use between 4, 6, 8 and 20 joists SX26 Use between 8, 20, 22, 24 and 26 joists OC With Slide-on Stud SX5 Use between 4, 6, 8 and 20 joists OC SX60 Use between 8, 20, 22, 24 and 26 joists OC Not rated for ceiling fan usage.

46 FF46 3 x 2 Square Corner Switch Boxes With Conduit Knockouts FF Deep, Welded Plaster ears* 2 Deep, Gangable Plaster ears* HB 2 Deep, Gangable Loxbox support on each side Plaster ears* LE 2 Deep, Gangable Four nail holes each side side leveling bosses Deep, Gangable Plaster ears* 222-OW 2 2 Deep, Gangable Old work-support clamps Plaster ears* Deep, Gangable Plaster ears* 222LE 2 2 Deep, Gangable Four nail holes each side side leveling bosses 222NL 2 2 Deep, Gangable Stud NL bracket set back 2 222VB-PL 2 2 Deep, Gangable Plain vertical bracket set back 3 4 Depth Cubic Inch Knockout Description Wt. Lbs. Std. Number (inches) Capacity Sides Ends Bottom Per 00 Pkg. 94* 2 Non-Gangable 7.5 (2) 2 () * 2 Gangable 0.0 (4) 2 (2) 2 (2) HB* 2 Gangable 0.0 (4) 2 (2) 2 (2) LE 2 Gangable 0.0 (4) 2 (2) 2 (2) * 2 2 Gangable 2.5 (4) 2 (2) 2 () OW* 2 2 Gangable 2.5 (4) 2 (2) 2 () * 2 2 Gangable 2.5 (4) 3 4 (2) 3 4 () LE 2 2 Gangable 2.5 (4) 2 (2) 2 () NL 2 2 Gangable 2.5 (4) 2 (2) 2 () VB-PL 2 2 Gangable 2.5 (2) 2 (2) 2 () * Plaster ears support GFCI and decorative cover plates.

47 FF47 3 x 2 Square Corner Switch Boxes With Conduit Knockouts FF Deep, Gangable Plaster ears* Deep, Gangable Plaster ears* 333LE Deep, Gangable Two nail holes each side side leveling bosses 333VB Deep, Gangable Plain vertical bracket set back D 3 2 Deep, Gangable Plaster ears* Deep, Gangable Plaster ears* 333D-LE 3 2 Deep, Gangable Two nail holes each side Depth Cubic Inch Knockout Description Wt. Lbs. Std. Number (inches) Capacity Sides Ends Bottom Per 00 Pkg. 333* Gangable 4.0 (4) 2 (2) 2 () * Gangable 4.0 (4) 3 4 (2) 3 4 () LE Gangable 4.0 (4) 2 (2) 2 () VB Gangable 4.0 (2) 2 (2) 2 () D* 3 2 Gangable 8.0 (4) 2 (4) 2 () * 3 2 Gangable 8.0 (4) 3 4 (4) 3 4 () D-LE 3 2 Gangable 8.0 (4) 2 (4) 2 () * Plaster ears support GFCI and decorative cover plates.

48 FF48 FF x 2 Square Corner Switch Boxes With Conduit Knockouts Depth Cubic Inch Knockout Description Wt. Lbs. Std. Number (inches) Capacity Sides Ends Bottom Per 00 Pkg. SB () (2) 2 32 SB Deep, Welded Plain flat vertical bracket perfect for remodeling 4 Square Corner Switch Boxes With Conduit Knockouts 32AP/2 2 8 Deep, Welded Two gang 32AP-SPL 2 8 Deep, Welded Two gang 32APFB-SPL 2 8 Deep, Welded Two gang plain vertical bracket Depth Cubic Inch Knockout Description Wt. Lbs. Std. Number (inches) Capacity Sides Ends Bottom Per 00 Pkg. 32AP/ (6) 2 (6) 2 (5) AP-SPL (4) 2 (4) 2 (3) (2) 3 4 (2) 3 4 (2) APFB-SPL (2) 2 (2) 2 (3) () 3 4 (4) 3 4 (2) 3 4

49 FF49 FF49 3 x 2 Bevel Corner Switch Boxes 2 4 Deep With Nonmetallic Sheathed Cable Clamps 388LE-OR-44LE 2 4 Deep, Gangable External nail brackets leveling bosses 388LR-OR-44LR 2 4 Deep, Gangable external nail brackets leveling bosses Plaster ears* 388-OR Deep, Gangable external nail brackets Plaster ears* 388HB 2 4 Deep, Gangable Loxbox support welded on each side Plaster ears* 388VB-OR-44VB 2 4 Deep, Gangable Plain vertical bracket set back DW 2 4 Deep, Gangable Stud NL bracket set back 4 388NL-OR-44NL 2 4 Deep, Gangable Stud NL bracket set back 2 388LES 2 4 Deep, Gangable, Welded External nail brackets leveling bosses Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. Number (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 388LE-OR-44LE CL (4) 2 32 () Gangable 388LR-OR-44LR* CL (4) 2 32 () Gangable 388-OR-44* CL (4) 2 32 () Gangable 388HB* CL (4) 2 32 () Gangable 388VB-OR-44VB CL (4) 2 32 () Gangable 388DW CL (4) 2 32 () Gangable 388NL-OR-44NL CL (4) 2 32 () Gangable 388LES CL (4) 2 32 () Non-Gangable 388LESN CL (4) 2 32 () Non-Gangable 388VB-PL2G CL (8) 2 32 (2) Welded Assembly * Plaster ears support GFCI and decorative cover plates. 388LESN 2 4 Deep, Welded Two 6 penny nails in external brackets leveling bosses 388VB-PL2G 2 4 Deep, Welded Plain vertical bracket set back 3 4

50 FF50 FF50 3 x 2 Square Corner Switch Boxes With Nonmetallic Sheathed Cable Clamps 95 2 Deep, Welded Plaster ears* Deep, Gangable Plaster ears* Deep, Gangable Plaster ears* 384LR 2 2 Deep, Gangable Leveling bosses Plaster ears* 384LE 2 2 Deep, Gangable Two nail holes each side leveling bosses 384-OW 2 2 Deep, Gangable Old work support clamps Plaster ears* 384NL 2 2 Deep, Gangable Stud NL bracket set back 2 384DW-PL 2 2 Deep, Gangable Stud NL bracket set back 4 Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. Number (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg Non-Gangable 7.5 CL (4) * 2 Gangable 0.0 CL (4) 2 32 () * 2 2 Gangable 2.5 CL (2) 2 () (4) LR* 2 2 Gangable 2.5 CL (2) 2 () (4) LE 2 2 Gangable 2.5 CL (2) 2 () (4) OW* 2 2 Gangable 2.5 CL-26 (4) 2 (2) 2 () (4) NL 2 2 Gangable 2.5 CL (2) 2 () (4) DW-PL 2 2 Gangable 2.5 CL (2) 2 () (4) VB-PL 2 2 Deep, Gangable Bracket set back VB-PL 2 2 Gangable 2.5 CL (2) 2 () (4) 2 32 * Plaster ears support GFCI and decorative cover plates.

51 FF5 FF5 3 x 2 Square Corner Switch Boxes With Nonmetallic Sheathed Cable Clamps 384LES-VB 2 2 Deep, Welded Plain vertical bracket set back LES 2 2 Deep, Welded Four nail holes each side 384VB-PL2G 2 2 Deep, Welded Plain vertical bracket set back LES 2 2 Deep, Welded External nail brackets 385-LESN 2 2 Deep, Welded Two 6 penny nails in side Deep, Gangable Plaster ears* 389VB Deep, Deep, Gangable Plain vertical bracket set back D 3 2 Deep, Gangable Two nail holes each side Plaster ears* 384DLE 3 2 Deep, Gangable Two nail holes each side 384D-NL 3 2 Deep, Gangable Stud NL bracket set back 2 Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. Number (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 384LES-VB CL (2) 2 () Non-Gangable (4) LES CL (2) 2 () Non-Gangable (4) VB-PL2G CL (2) 2 (2) Non-Gangable, Welded Assembly (8) LES CL (2) 2 () Non-Gangable (4) LESN CL (2) 2 () Non-Gangable (4) * CL-26 (4) 2 (2) 2 () Gangable (4) VB CL-26 (2) 2 (2) 2 () Gangable (4) D* CL-26 (4) 2 (2) 2 () Gangable (4) D-VBPL 3 2 Deep, Gangable Plain vertical bracket set back DLE CL-26 (4) 2 (2) 2 () Gangable (4) D-NL CL-26 (4) 2 (2) 2 () Gangable (4) D-VBPL CL-26 (2) 2 (2) 2 () Gangable (4) 2 32 * Plaster ears support GFCI and decorative cover plates.

52 FF52 FF52 3 x 2 Corner Switch Boxes With Ground Wire With Conduit Knockouts Provided with ground screw and 0 long No. 2 AWG solid, insulated ground wire. 384DP 3 2 Deep, Gangable Two nail holes each side, Plaster ears 384DLEP 3 2 Deep, Gangable Two nail holes each side 384D-VBPLP 3 2 Deep, Gangable Plain vertical bracket set back 3 4 Number Depth (inches) Cubic Inch Capacity Type Clamp Knockout Description Sides Ends Bottom Wt. Lbs. Per DP 3 2 Gangable 8.0 CL-26 (4) 2 (2) 2 () (4) DLEP 3 2 Gangable 8.0 CL-26 (4) 2 (2) 2 () (4) D-VBPLP 3 2 Gangable 8.0 CL-26 (2) 2 (2) 2 () (4) 2 32 Std. Pkg.

53 FF53 FF53 3 x 2 8 Square Corner Switch Boxes With Nonmetallic Sheathed Cable Clamps 6LES Deep, Welded External nail brackets 6LESN Deep, Welded Two 6 penny nails in side Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. Number (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 6LES CL (2) 2 () Non-Gangable (4) LESN CL (2) 2 () Non-Gangable (4) x 2 Square Corner Switch Boxes With Nonmetallic Sheathed Cable Clamps 6LE 2 2 Deep, Gangable Patented raised ground screw hole, external nail brackets, leveling bosses 6LE-VB 2 2 Deep, Gangable Patented raised ground screw hole bracket set back 3 4 8LES Deep, Welded External nail brackets Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. Number (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 6LE CL-26 (4) 2 (2) 2 () Gangable (4) LE-VB CL-26 (2) 2 (2) 2 () Gangable (4) LES CL-26 (4) 2 (2) 2 () Non-Gangable (4) 2 32

54 FF54 FF54 3 x 2 Square Corner Switch Boxes With Armored Cable/Metal Clad Cable/Flexible Metal Conduit Clamps 7F 2 Deep, Gangable Plaster ears* 73F 2 2 Deep, Gangable Plaster ears* 73FNL 2 2 Deep, Gangable Stud NL bracket set back 2 73FVB 2 2 Deep, Gangable Plain vertical bracket set back FHB 2 2 Deep, Gangable Lox Box supports Plaster ears* 74F Deep, Gangable Plaster ears* 74FVB-PL Deep, Gangable Plain vertical bracket set back 3 4 8LESNX Deep, Welded Two lb penny nails in external brackets Depth Cubic Inch Type Knockout Description Wt. Lbs Std. Number (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 7F* 2 Gangable 0.7 CL-3 -- (4) 2 32 () F* 2 2 Gangable 2.5 CL-3 -- (2) 2 () (4) FNL 2 2 Gangable 2.5 CL-3 -- (2) 2 () (4) FVB 2 2 Gangable 2.5 CL-3 -- (2) 2 () (4) FHB* 2 2 Gangable 2.5 CL-3 -- (2) 2 () (4) F 3 2 Deep, Gangable Plaster ears* 74F* Gangable 4.0 CL-3 (4) 2 (2) 2 () (4) FVB-PL Gangable 4.0 CL-3 (2) 2 (2) 2 () (4) LESNX Non-Gangable 8.0 CL-3 (4) 2 (2) 2 () (4) F* 3 2 Gangable 8.0 CL-3 (4) 2 (2) 2 () (4) FVB 3 2 Gangable 8.0 CL-3 (4) 2 (2) 2 () (4) 2 32 * Plaster ears support GFCI and decorative cover plates. 75FVB 3 2 Deep, Gangable Plain vertical bracket set back 3 4

55 FF55 FF55 3 x 2 Square Corner Switch Boxes With Ground Wire With Armored Cable/Metal Clad Cable/Flexible Metal Conduit Clamps Provided with ground screw and 0 long No. 2 AWG solid, insulated ground wire. 75FP 3 2 Deep, Gangable Plaster ears* 75FVBP 3 2 Deep, Gangable Plain vertical bracket set back 3 4 Number Depth (inches) Cubic Inch Capacity Type Clamp Knockout Description Sides Ends Bottom Wt. Lbs. Per 00 75FP 3 2 Gangable 8.0 CL-3 (4) 2 (2) 2 () (4) FVBP 3 2 Gangable 8.0 CL-3 (4) 2 (2) 2 () (4) 2 32 Std. Pkg.

56 FF56 FF56 Multigang Switch Boxes 7 /8 Deep with Conduit Knockouts 2G5075S Two Gang Wide, Welded 3G5075S Three Gang Wide, Welded 4G5075S Four Gang Wide, Welded 5G5075S Five Gang Wide, Welded 6G5075S Six Gang 4 8 Wide, Welded 7G5075S Seven Gang Wide, Welded 8G5075S Eight Gang Wide, Welded Number Knockout Description Dimensions No. of Wt. Lbs. Cubic Inch W x H Gangs per 00 Capacity Sides Ends Bottom Std. Pkg. 2G5075S 6-7/8 x 4-9/ (4) 2 (2) 2 (3) (4)Eccentric (2)Eccentric (2) 3 4 3G5075S 8-3/4 x 4-9/ (6) 2 (2) 2 (3) (4)Eccentric (2)Eccentric (2) 3 4 4G5075S 0-9/6 x 4-9/ (6) 2 (2) 2 (6) (6)Eccentric (2)Eccentric (4) 3 4 5G5075S 2-5/6 x 4-9/ (8) 2 (2) 2 (6) (6)Eccentric (2)Eccentric (4) 3 4 6G5075S 4-/8 x 4-9/6. 6 (8) 2 (2) 2 (6) (8)Eccentric (2)Eccentric (4) 3 4 7G5075S 5-5/6 x 4-9/ (0) 2 (2) 2 (9) (8)Eccentric (2)Eccentric (6) 3 4 8G5075S 7-3/4 x 4-9/ (0) 2 (2) 2 (9) (0)Eccentric (2)Eccentric (6) 3 4

57 FF57 FF57 Multigang Switch Box Covers 3 /4 Raised Device Covers 2GC75N Two Gang 7 6 Wide 3GC75N Three Gang Wide 4GC75N Four Gang Wide 5GC75N Five Gang Wide 6GC75N Six Gang 4 8 Wide 7GC75N Seven Gang Wide 8GC75N Eight Gang Wide Number Dimensions W x H Cubic Inch Capacity No. of Gangs Wt. Lbs. per 00 2GC75N x GC75N x GC75N x GC75N x GC75N 4 8 x GC75N x GC75N x Device covers will also fi t the next smaller size box. Std. Pkg. Low Voltage Partition For Multigang Switch Boxes Number Description Wt. Lbs. per 00 Std. Pkg. LVP-N 7 8 Partition for use with 3 4 Raised Covers

58 FF58 Masonry Boxes 2 /2 Deep x 3 3 /4 High With Concentric Conduit Knockouts (Non-gangable) FF58 M Wide, Welded Single gang M Wide, Welded Two gang M Wide, Welded Three gang M Wide, Welded Four gang LVP-250 Partition Width Cubic Inch Concentric Knockout Description Wt. Lbs. Std. Number (inches) Capacity Sides Ends Bottom Per 00 Pkg. M (4) (2) (2) M (4) (4) (4) M (4) (6) (6) M (4) (8) (4) Low Voltage Partitions LVP For 2 2 Two and Three Gang Masonry

59 FF59 Masonry Boxes 3 /2 Deep x 3 3 /4 High with Concentric Conduit Knockouts (Non-gangable) FF59 M Wide, Welded Single gang M Wide, Welded Two gang M Wide, Welded Three gang M Wide, Welded Four gang LVP-350 Partition Width Cubic Inch Concentric Knockout Description Wt. Lbs. Std. Number (inches) Capacity Sides Ends Bottom Per 00 Pkg. M (4) (4) (2) M (4) (8) (4) M (4) (2) (6) M (4) (6) (4) Low Voltage Partitions LVP For 3 2 Two, Three and Four Gang Masonry Boxes

60 FF60 Outlet Box/Switch Box Accessories FF60 MSC-OBN Outlet Box Metal stud clip 490 Switch Box Extension 892 LOX BOX Switch Box Supports 896 E-Z-IN Switch box supports Wt. Lbs. Ctn. Std. Number Description Per 00 Qty. Pkg. Outlet Box Metal Stud Clip MSC-OBN Mounts all types, sizes and depths of outlet boxes to any metal stud Switch Box Extension 490 Fits all single-gang switch boxes with 8 screws Depth cubic inch wiring capacity Switch Box Supports 892 LOX BOX fi ts standard switch boxes - wall 4 minimum to 4 maximum * E-Z-IN wall 4 minimum to 4 maximum * Used in pairs. GR2 Grounding clip SCR032-PTL0C Insulated Grounding screw and pigtail SCR032-PTL0B Bare Wire Grounding screw and pigtail SCR032 Grounding screw Wt. Lbs. Std. Number Description Per 00 Pkg. Grounding Clip GR2 For use with No. 4 or No. 2 non-metallic sheathed cable having ground wire Washer Head Grounding Screws and Pigtails SCR032-PTL0C 3 8 long thread with 0 solid insulated, No. 2 AWG wire pigtail SCR032-PTL0B 3 8 long thread with 0 solid bare wire, No. 4 AWG wire pigtail SCR long thread green