The third-party trademarks used herein are trademarks of their respective owners.

Transcription

1 The third-party trademarks used herein are trademarks of their respective owners. Johnson & Johnson Medical Limited PO BOX 1988, Simpson Parkway, Livingston, West Lothian, EH54 0AB, United Kingdom. Incorporated and registered in Scotland under company number SC DePuy Orthopaedics, Inc. 700 Orthopaedic Drive Warsaw, IN USA Tel: +1 (800) Fax: +1 (574) DePuy International Ltd St Anthony s Road Leeds LS11 8DT England Tel: +44 (0) Fax: +44 (0) DePuy (Ireland) Loughbeg Ringaskiddy Co. Cork Ireland Tel: Fax: depuysynthes.com Johnson & Johnson Medical Limited All rights reserved. CA#DSEM/JRC/0615/0319 Issued: 06/15

2 This publication is not intended for distribution in the USA. PRODUCT CODE CATALOGUE

3 INTRODUCTION Primary Cementless Fixation 100 SERIES Maximises host bone contact with POROCOAT Porous Coating and GRIPTION. POROCOAT Commercially pure titanium sintered metal beads. SECTOR Three screw holes for optional adjunct fi xation and access to the ilium and posterior column. GRIPTION Commercially pure titanium sintered metal particles on a POROCOAT substrate. 300 SERIES Coated spikes are placed along the radius of the cup and support for additional fi xation. DUOFIX Combination of POROCOAT Porous Coating and highly amorphous hydroxyapatite (HA). MULTI- HOLE 8 to 12 screw holes, depending on shell size for optional adjunct fi xation. Liner Options BANTAM For smaller patients or acetabular dimensions, dysplastic acetabuli (DDH), Multi-hole style only. Proven, Safe Performance Moderately cross-linked polyethylene liners. Revision STANDARD PROFILE Revision cup with additional peripheral screw holes. Zirconia toughened alumina liners. DEEP PROFILE DPX Revision cup with additional peripheral screws, 4-6mm offset at the dome. 1

4 CUPS Primary Cups C 100 Sector MULTIHOLE/BANTAM 300 POROCOAT GRIPTION DUOFIX POROCOAT GRIPTION DUOFIX POROCOAT GRIPTION POROCOAT 38 mm mm mm mm mm Revision Cups Revision STD GRIPTION Deep Profile GRIPTION 48 mm mm Primary Cups (mm) 52 mm Revision Cups (mm) mm mm Trials XX (XX = Cup Size) Trials XX (XX = Cup Size -1) XX (XX = Cup Size -1) 2

5 CUPS Revision Cups Downsizing Downsized by 6 mm: Inserts are downsized due to increased cup thickness that is required to accommodate peripheral screw. For cups up to size inserts are downsized by 3 sizes (6 mm).e.g choosing a cup requires a insert. Downsized by 4 mm: Inserts are downsized due to increased cup thickness that is required to accommodate peripheral screw. For cups of and above inserts are downsized by 2 sizes (4 mm).e.g choosing a cup requires a insert. Revision Trials These codes are used as trial liners with PINNACLE cups from size to (Primary) or to 80 mm (Revision) Spacer Trials (can be modularly combined with any of the Liner Bearing Trials) Liner Bearing Trials Revision Liner Spacer Trial PINNACLE Trial Liner Bearing 28 Neutral Revision Liner Spacer Trial PINNACLE Trial Liner Bearing D Revision Liner Spacer Trial PINNACLE Trial Liner Bearing 28 Lip Revision Liner Spacer Trial PINNACLE Trial Liner Bearing 28 4 N Revision Liner Spacer Trial PINNACLE Trial Liner Bearing 32 Neutral PINNACLE Trial Liner Bearing D PINNACLE Trial Liner Bearing 32 Lip PINNACLE Trial Liner Bearing 32 4 N PINNACLE Trial Liner Bearing 36 Neutral PINNACLE Trial Liner Bearing D PINNACLE Trial Liner Bearing 36 4 N 3

6 LINERS Cup Size Proven, Safe Performance mm liner 28 mm liner 32 mm liner 36 mm liner 40 mm liner 44 mm liner Primary 38 mm 40 mm 42 mm 44 mm 46 mm 48 mm 50 mm 52 mm Revision 78 mm 80 mm Neutral Neutral +4 Neutral Lipped Neutral +4 Neutral Lipped Neutral +4 Neutral Neutral Trials XXX XXX = last 3 figures of implant code XXX (XXX = liner size up to liner OD) XXX (XXX = liner size up to ) XXX (XXX = liner size up to ) XXX (XXX = liner size) XXX (XXX = liner size) 4

7 LINERS Cup Size 28 mm Inner Diameter 32 mm Inner Diameter 36 mm Inner Diameter 40 mm Inner Diameter 44 mm Inner Diameter Primary 38 mm 40 mm 42 mm 44 mm 46 mm 48 mm 50 mm 52 mm Revision 78 mm 80 mm Neutral +4 Neutral Lipped Neutral +4 Neutral Lipped Neutral +4 Neutral Neutral +4 Neutral Neutral Trials XXX XXX XXX XXX XXX 5

8 LINERS Cup Size 32 mm liner Primary 38 mm 40 mm 42 mm 44 mm 46 mm 48 mm 50 mm 52 mm Revision 78 mm 80 mm Ceramic Ceramic Ceramic Trials XX (XX = liner size) XX (XX = liner size) XX (XX = liner size) 6

9 LINERS Enhanced Stability Constrained Liners (GVF) Cup Size 28 mm liner 32 mm liner 36 mm liner 40 mm liner Primary 38 mm 40 mm 42 mm 44 mm 46 mm 48 mm 50 mm 52 mm Revision 78 mm 80 mm +4 Neutral Neutral Neutral Neutral Trials XXX XXX Available for size 52 and 54 only. Use a MARATHON trial for the other sizes XXX XXX 7

10 HEADS CERAMAX Heads DELTA TS Heads (Titanium Sleeve - pre assembled) ARTICUL/EZE 12/14 BIOLOX DELTA HEADS 11/13 BIOLOX DELTA HEADS 9/10 BIOLOX DELTA HEADS ARTICUL/EZE 12/14 DELTA TS HEADS 28 mm 32 mm 36 mm 28 mm 32 mm 36 mm mm 28 mm 32 mm 36 mm 28 mm 32 mm 36 mm 40 mm 44 mm Neck Length Neck Length Neck Length Neck Length Neck Length Neck Length Neck Length Neck Length Neck Length Neck Length

11 HEADS Metal Heads ARTICUL/EZE 12/14 Metal Heads ARTICUL/EZE 11/13 Metal Heads ARTICUL/EZE 9/10 Metal Heads Standard Metal Heads 28 mm 36 mm 40 mm 44 mm 28 mm 36 mm 40 mm 44 mm 28 mm 36 mm 28 mm 32 mm Neck Length -6 Neck Length Neck Length Neck Length Neck Length Neck Length Neck Length Neck Length Neck Length * Neck Length Neck Length Neck Length * Neck Length * * Skirted heads. 9

12 Screw Offerings Length (mm) Dome 6.5 mm Cancellous Peripheral 5.0 mm Cortical Apex Hole mm mm mm mm 30 mm 35 mm 40 mm 45 mm 50 mm 55 mm 65 mm