Parts Manual EN
|
|
- Ross Webb
- 5 years ago
- Views:
Transcription
1 Parts Manual PL Series Inline Extended Grinders For additional product information visit our website at
2 Nomenclature 12 X 1 1 XX - 36 XX OH Tool Series 12 = Ergo Grinder/Sander Throttle Type L = Locking Lever S = Locking Lever Motor Size 1 = 0.3 hp Handle Style 1 = Straight, Extended Speed Options (RPM) Front Exhaust Rear Exhaust Front Exhaust Rear Exhaust (3" Extended) (3" Extended) (5" Extended) (5" Extended) 00 = 28, = 28, = 28, = 28, = 25, = 25,000 Termination Code 36 = 300 Series 1/4" Capacity Collet (3-piece) Optional Collet (no extra cost) 08 = 1/8" 14 = 7/32" M6 = 6mm Overhose Option (extra cost) OH = Overhose (rear exhaust models only) Page 2
3 Description and Instructions Language Version: This Parts Manual is the Original Instructions intended for all persons who will use or repair these tools. Product Identification: Refer to the Model Nomenclature page in this document. Noise and Vibration: Refer to documents CE-1007DC and CE-1007TD. General Safety: Refer to General Safety document, CE-2007 for general safety operating instructions for this equipment. Lubrication: Refer to lubrication document, PL65-LUB, for general lubrication instructions. CAUTION: Do not use lubricant subsitutes. This could result in damage to the tool. General Description: Air powered inline extended grinder. Intended Use: These air powered grinders are intended for material removal applications using carbide burs, mounted points, or mounted wheels. Use only for their designated purpose. Do not use as a hammer, lever or other improper usage that can cause tool damage and operator injury. Copyright protection: Apex Tool Group, LLC reserves the right to modify, supplement or improve this document or the product without prior notice. This document may not be reproduced in any way, shape or form, in full or parts thereof, or copied to another natural or machine readable language or to a data carrier, whether electronic, mechanical, optical or otherwise without the express persmission of Apex Tool Group, LLC. Page 3
4 Front Exhaust Grinders A 2 3 Models 12L L S L L Page 4
5 Front Exhaust Grinders Illustration "A" Ref Number # X EN Description Housing Wrench K1 Inlet Adapter K1 Exhaust Plug K1 O-Ring PT 1 K1 O-Ring K1 Filter Disc K1 Filter Retainer PT 1 Rear Plate (includes 1 Ref. 18) K2 Valve Spring K2 Valve K2 Valve Seat K2 Lever Pin K2 Push Rod K2 Lock-Off Lever Assembly Motor Housing PT 1 Cylinder PT 1 K3 Ball Bearing K3 Pin 19 Table "A" 4 K3 Rotor Blade (*) PT 1 K3 Spacer K3 Shim Packet PT 1 K3 Ball Bearing S 1 Rotor PT 1 Front Plate (includes 1 Ref. 18) PT 1 Coupling Nut Coupling K4 Lock Ring Sleeve K1 Muffler Felt K4 Lock Ring Wrench (7/16") Wrench (11/16") Repair Kits K Air Inlet Kit K Throttle Kit K3 Table "A" 1 1 Motor Kit K Housing Kit * Table "A" 1 1 Rotor Blade Kit (contains 50 Rotor Blades) (#) Quantity (X) Included in Repair Kit (K#) or Recommended Spare Parts (quantity shown based on 1-5 tools in operation) Table "A" Ref. Description # 12(-) (-)1111 # 12(-) (-) Rotor Blade PT PT K3 Motor Kit * Rotor Blade Kit Page 5
6 Page 6 Rear Exhaust Grinders B w/o Overhose Models 12L L S with Overhose
7 Rear Exhaust Grinders Illustration "B" Ref Number # X EN Description Housing Wrench K5 Inlet Adapter (non Overhose version) K5 Inlet Adapter (Overhose version) K5 Diffuser K5 Filter Disc K5 Filter Retainer K5 Muffler (Overhose version) PT 1 K5 O-Ring (Overhose version) PT 1 Rear Plate (includes 1 Ref. 18) K2 Valve Spring K2 Valve K2 Valve Seat K2 Lever Pin K2 Push Rod K2 Lock-Off Lever Assembly Motor Housing PT 1 Cylinder PT 1 K3 Ball Bearing K3 Pin PT 4 K3 Rotor Blade (*) PT 1 K3 Spacer K3 Shim Packet PT 1 K3 Ball Bearing S 1 Rotor PT 1 Front Plate (includes 1 Ref. 18) PT 1 Coupling Nut Coupling K6 Lock Ring Sleeve K6 Lock Ring Wrench (7/16") Wrench (11/16") Repair Kits K Throttle Kit K Motor Kit K Air Inlet Kit (non Overhose version) Air Inlet Kit (Overhose version) K Housing Kit * Rotor Blade Kit (contains 50 Rotor Blades) (#) Quantity (X) Included in Repair Kit (K#) or Recommended Spare Parts (quantity shown based on 1-5 tools in operation) Page 7
8 3 and 5 Extension Assemblies C Press replacement bearing 1/4 below the end of the spindle housing. Page 8
9 3 and 5 Extension Assemblies Illustration "C" Ref Number # X K7 Retaining Ring PT 1 Coupling Nut 3 505PT 1 K7 Ball Bearing PT 1 Spindle (3" Extended) 1561PT 1 Spindle (5" Extended) Sleeve Housing (3" Extended) 6125PT 1 Housing (5" Extended) PT 1 K7 Needle Bearing PT 1 Chuck Body 9 308PT 1 Collet (1/4") PT 1 K7 Nosepiece PT 1 K7 Collet Chuck Cap Repair Kits K Output Kit EN Description (#) Quantity (X) Included in Repair Kit (K#) or Recommended Spare Parts (quantity shown based on 1-5 tools in operation) Page 9
10
11
12 Sales & Service Centers Note: All locations may not service all products. Please contact the nearest Sales & Service Center for the appropriate facility to handle your service requirements. Detroit, MI Houston, TX Lexington, SC Los Angeles, CA Apex Tool Group Apex Tool Group Apex Tool Group Apex Tool Group Sales & Service Center Sales & Service Center 670 Industrial Drive Sales & Service Center 2630 Superior Court 6550 West Sam Houston Lexington, SC Stanton Avenue Auburn Hills, MI Parkway North, Suite 200 Tel: Unit B Tel: Houston, TX Tel: Buena Park, CA Fax: Tel: Fax: Tel: Fax: Fax: Seattle, WA York, PA Canada Germany Apex Tool Group Apex Tool Group Apex Tool Group Apex Tool Group Sales & Service Center Sales & Service Center Sales & Service Center GmbH & Co. OHG nd Avenue N.E East Market Street 5925 McLaughlin Road Industriestraße 1 Redmond, WA York, PA Mississauga, Ont. L5R 1B Westhausen Tel: Tel: Canada Germany Fax: Fax: Tel: Tel: +49 (0) Fax: Fax: +49 (0) England France China Mexico Apex Tool Group Apex Tool Group S.N.C. Cooper (China) Co., Ltd. Cooper Tools GmbH & Co. OHG 25 rue Maurice Chevalier a company of de México S.A. de C.V. C/O Spline Gauges B.P. 28 Apex Tool Group, LLC a company of Piccadilly, Tamworth Ozoir-La-Ferrière 955 Sheng Li Road, Apex Tool Group, LLC Staffordshire B78 2ER Cedex, France Heqing Pudong, Shanghai Vialidad El Pueblito #103 United Kingdom Tel: China Parque Industrial Querétaro Tel: Fax: Tel: Querétaro, QRO Fax: Fax: Mexico Tel: +52 (442) Fax: +52 (442) Brazil Hungary Cooper Tools Industrial Ltda. Apex Tool Group a company of Hungaria Kft Apex Tool Group, LLC Platànfa u.2 Av. Liberdade, Györ Zona Industrial - Iporanga Hungary Sorocaba Tel: SP Brazil Fax: Tel: Fax: Apex Tool Group, LLC 1000 Lufkin Road Apex, NC Phone: Fax: (PL )/Printed in USA 12/2012/Copyright Apex Tool Group, LLC
Parts Manual PL
Parts Manual PL30-027-7 45-828 03/0/20 0L27 & 0K27 Series Low Profile Right Angle Grinder/Sander 2 Series Handles Shown Throttle Type Free Speed (RPM) Grinders / Sanders Termination 2,000 3,500 4,500 Type
More information21L1341 Series Inline Vent Trimmer
Parts Manual 21L1341 Series Inline Vent Trimmer For additional product information visit our website at http://www.apextoolgroup.com Nomenclature Includes (Illustration "B") Model Vent Trimmer Drive Pinion
More information35 Series Screwdrivers
Parts Manal 823121EN 35 Series Screwdrivers For additional product information visit our website at http://www.apextoolgroup.com 823121EN Cleco Description Language Version: This Parts Manual is the Original
More informationProduct Manual PL31-15LF 04/02/ LF Series Inline Grinders
Product Manual PL31-15LF 15LF Series Inline Grinders 15 L F 0 X X - XX NL Tool Series 15 = Drill Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 0 = Straight Exhaust Type 5 = Front Exhaust
More information14TTA-2311 Pistol Grip Clecomatic Clutch Nutrunner
Parts Manual 14TTA-2311 Pistol Grip Clecomatic Clutch Nutrunner For additional product information visit our website at http://www.apextoolgroup.com Model Nomenclature A 14 T T A - 2311 Tool Series 14
More information12-10 Series Inline Grinder
Parts Manual 45-858EN 2-0 Series Inline Grinder Termination -36 Terminations -4 and -6 For additional product information visit our website at http://www.apextoolgroup.com 45-858EN Dotco Nomenclature and
More information10R90 Series Light Duty Precision Turbine Grinder
Parts Manual 45-8043 10R90 Series Light Duty Precision Turbine Grinder CAUTION Do Not Lubricate This Tool! For additional product information visit our website at http://www.apextoolgroup.com 45-8043 Dotco
More information15D Series Pistol Grip and Inline Drills
Parts Manual 823144EN 15D Series Pistol Grip and Inline Drills For additional product information visit our website at http://www.apextoolgroup.com 823144EN Cleco Product Information The original language
More informationAiretool. 999-C-45 ( ) Electric Rolling Motor. Operating & Service Manual PL EN 01/26/2012
Operating & Service Manual PL19-6009EN 999-C-45 (8405492) Electric Rolling Motor For additional product information visit our website at http://www.apextoolgroup.com PL19-6009EN Description Tool Specifications
More information48EP Series Electronically Controlled Pistol Grip Nutrunner
Parts Manual PL2EN-48EP- 0/09/202 48EP Series Electronically Controlled Pistol Grip Nutrunner For additional product information visit our website at http://www.apextoolgroup.com PL2EN-48EP- 0/09/202 Cleco
More information48EP Series Electronically Controlled Pistol Grip Nutrunner
Parts Manual PL2EN-8EP /0/20 8EP Series Electronically Controlled Pistol Grip Nutrunner For additional product information visit our website at http://www.apextoolgroup.com PL2EN-8EP /0/20 Cleco General
More information19RA Series Right Angle Nutrunner
Parts Manual P12-1014EN 19RA Series Right Angle Nutrunner For additional product information visit our website at http://www.apextoolgroup.com P12-1014EN Cleco Model Nomenclature A 19 R A X XX XX X Tool
More informationMA3W-2238 Radial Piston Power Motor
Parts Manual MA3W-2238 Radial Piston Power Motor For additional product information visit our website at http://www.apextoolgroup.com Specifications and Description Specifications Table: Model Maximum
More informationParts Manual PL C 12/28/2010. MP4400 Series (Type 4) Random Orbital Sander. Non-Vacuum Models. Vacuum Models MP 44 XX - XX XX
Parts Manual MP4400 Series (Type 4) Random Orbital Sander Non-Vacuum Models Vacuum Models MP 44 XX - XX XX Orbit Pattern 00 = 3/6" Offset (Black Handle) - Standard Sanding Orbit 03 = 3/32" Offset (Chrome
More informationA6R-2218 Reversible Axial Piston Power Motors
Instruction Manual A6R-2218 Reversible Axial Piston Power Motors For additional product information visit our website at http://www.apextoolgroup.com Nomenclature Model Number Maximum Allowable RPM * Stall
More informationParts Manual EN PL /18/ L41 Series Inline Extended Grinders
Parts Manual 45-8188EN PL30-850 12L41 Series Inline Extended Grinders For additional product information visit our website at http://www.apextoolgroup.com 45-8188EN Dotco Nomenclature 12 L 4 1 XX - XX
More information75RM-2024 Right Angle Fixtured Nutrunner
Instruction Manual PL12-1092EN 75RM-2024 Right Angle Fixtured Nutrunner For additional product information visit our website at http://www.apextoolgroup.com Cleco Product Information PL70-1092EN The original
More information14RA Series Right Angle Nutrunners
Parts Manual 822EN RA Series Right Angle Nutrunners For additional product information visit our website at http://www.apextoolgroup.com 822EN Cleco General Information anguage Version: This Parts Manual
More informationSW100PRY220 ( ) Reversible Pistol Grip Swivel Reaction Bar Nutrunner
Parts Manual PL2-029EN Formerly: PC-468-5080 SW00PRY220 (4685080) Reversible Pistol Grip Swivel Reaction Bar Nutrunner Caterpillar # 8T-590 For additional product information visit our website at http://www.apextoolgroup.com
More information14PTA & 14TTA Series Pistol Grip Nutrunners
Parts Manual 4PTA & 4TTA Series Pistol Grip Nutrunners 4PTA Series 4TTA Series For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language
More information21 Series Double Reduction Rotary Vane Power Motors
Instruction Manual 45-8059EN Series Double Reduction Rotary Vane Power Motors For additional product information visit our website at http://www.apextoolgroup.com 45-8059EN Cleco General Information For
More informationParts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder
Parts Manual PL30-12R04 12R04 Series 0.1 HP Inline Pencil Grinder For additional product information visit our website at http://www.apextoolgroup.com Dotco Nomenclature 12 R 04 XX - X X Series 12 = Ergo
More information10N10 Series Inline Grinder
Parts Manual 0N0 Series Inline Grinder For additional product information visit our website at http://www.apextoolgroup.com Nomenclature and Specifications Product Type 0 = Aluminum Housing Grinder Throttle
More informationParts Manual EN
Parts Manual 45-8213EN PL30-1212 12L12 and 12S12 Series 0.3 HP Right Angle Grinder/Sander For additional product information visit our website at http://www.apextoolgroup.com 45-8213EN Dotco Nomenclature
More information10LF and 12LF Series Right Angle Grinders
Product Manual 10LF and 12LF Series Right Angle Grinders XX L F 2 XX - XX Tool Series 10 = Aluminum Housing 12 = Ergo Housing Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 2 = Right
More information10N M6 Series Right Angle Grinder
Parts Manual PL30-2042EN 10N1200-36M6 Series Right Angle Grinder For additional product information visit our website at http://www.apextoolgroup.com PL30-2042EN Dotco Nomenclature and Specifications Product
More informationParts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at
Parts Manual 10L4321 Router For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language of this manual is English. Product Safety Information:
More information15K Series Extented Mini Right Angle Drill Attachment
Parts Manual PL30-2052EN 15K27-5172 Series Extented Mini Right Angle Drill Attachment For additional product information visit our website at http://www.apextoolgroup.com PL30-2052EN Dotco Nomenclature
More information10LF and 12LF Series Right Angle Grinder and Sander
Product Manual 4-842EN 10LF and LF Series Right Angle Grinder and Sander For additional product information visit our website at http://www.apextoolgroup.com 4-842EN Dotco Nomenclature XX L F 2 XX - XX
More informationParts Manual EN
Parts Manual 4-83EN PL30- - Series Right Angle Grinder, Sander, and Router For additional product information visit our website at http://www.apextoolgroup.com 4-83EN Dotco Nomenclature X XX - XX XX XX
More informationAiretool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015
Operating & Service Manual PL9-6026EN 0/0/205 Airetool Gas Line Cleaners Range: 3/4 (9.05mm) to -/2 (38.0mm) For additional product information visit our website at http://www.apextoolgroup.com PL9-6026EN
More informationTechnical Information Cutting Speeds
Technical Information Cutting Speeds Speed, Feed & Power Please use the chart below as a guide only. Many variables contribute to the optimum parameters for each application. These variables include: particular
More informationN60 Rotary Vane Pneumatic Motor
Parts Manual PL70-1043EN 24-1312N60 Rotary Vane Pneumatic Motor For additional product information visit our website at http://www.apextoolgroup.com PL70-1043EN Cleco 24-1312N60 Rotary Vane Motor Model
More informationA6R-2221 Reversible Axial Piston Power Motor
Instruction Manual A6R-2221 Reversible Axial Piston Power Motor For additional product information visit our website at http://www.apextoolgroup.com Nomenclature Model Number Maximum Allowable RPM Stall
More informationMR30 Series Rotary Vane Power Motors
Instruction Manual PL70-1057EN MR30 Series Rotary Vane Power Motors For additional product information visit our website at http://www.apextoolgroup.com PL70-1057EN Cleco General Information For this Instruction
More information41NDR Series Air Shut-Off Ratchet Wrench
Instruction Manual PL17EN-41NDR 41NDR Series Air Shut-Off Ratchet Wrench For additional product information visit our website at http://www.apextoolgroup.com PL17EN-41NDR Cleco General Information For
More informationAiretool Airetrol Rolling Motor. Operating & Service Manual IM 03/23/2012
Operating & Service Manual 90074-IM 1550-900 Airetrol Rolling Motor For additional product information visit our website at http://www.apextoolgroup.com 90074-IM Description Free Speed Maximum Torque Minimum
More information1700 and 1900 Series Horizontal Grinders
Instruction Manual 823136EN 1700 and 1900 Series Horizontal Grinders For additional product information visit our website at http://www.apextoolgroup.com 823136EN Cleco General Information For this Instruction
More information88 Series Inline and Pistol Grip Screwdrivers
Parts Manual 823018EN 88 Series Inline and Pistol Grip Screwdrivers For additional product information visit our website at http://www.apextoolgroup.com 823018EN Cleco Nomenclature 88 XXX A XX - X C X
More informationDC Electric Assembly Tools
APTOOL.RU Phone: +7 (495) 723-19-55 Please note that all locations may not service all products. Please contact the nearest Apex Tool Group Sales & Service Center for the appropriate facility to handle
More informationParts Manual EN
Parts Manual 4- PL0- - Series Right Angle Grinder, Sander, and Router For additional product information visit our website at http://www.apextoolgroup.com 4- Dotco Nomenclature X XX - XX XX XX OH Product
More informationB4R Series Reversible Axial Piston Power Motors
Instruction Manual B4R Series Reversible Axial Piston Power Motors For additional product information visit our website at http://www.apextoolgroup.com Nomenclature Model Number Maximum Allowable RPM Stall
More informationAiretool. 720 Series Airetrol Rolling Motor. Operating & Service Manual IM 05/11/2011
Operating & Service Manual 90014-IM 05/11/2011 Airetool 720 Series Airetrol Rolling Motor Model Number Part Number (Order) 720-550-B 8405391 720-1800-B 8405383 720-2500-B 8405541 For additional product
More informationBalance Arms Air Cylinder and Spring Models
Parts Manual 8385 0/06/0 Balance Arms Air Cylinder and Spring Models For additional product information visit our website at http://www.apextoolgroup.com Safety Recommendations For your safety and the
More informationMM Series Radial Piston Power Motors
Instruction Manual MM Series Radial Piston Power Motors For additional product information visit our website at http://www.apextoolgroup.com Specifications Model Number Maximum Allowable Stall Starting
More informationSP-1037EN M. Durable Production Performance. CurrentControl For Quality Critical Joints
SP-1037EN 0208 7.5M Durable Production Performance CurrentControl For Quality Critical Joints Cleco CurrentControl 18 & 48 Series Durability. Spee Cost Effective Solution for Quality Critical Applications.
More informationParts Manual PL /25/ Series Inline Grinders
Parts Manual 45-8015 PL30-1025-1 04/25/2011 10-25 Series Inline Grinders Throttle Type Free Speed (RPM) Terminations 23,000 18,000 200 Collet 300 Collet Cone & Plug Type 1 Button 10B2580 10B2582-01 -36-77
More information19P & 19T Series Pistol Grip Screwdrivers
Service Manual P12-1012EN 19P & 19T Series Pistol Grip Screwdrivers 19P Series 19T Series For additional product information visit our website at http://www.apextoolgroup.com P12-1012EN Cleco General Information
More information10LF and 12LF Series Right Angle Grinder and Sander
Product Manual 4-42 0LF and LF Series Right Angle Grinder and Sander For additional product information visit our website at http://www.apextoolgroup.com 4-42 Dotco Nomenclature XX L F 2 XX - XX XX XX
More informationParts Manual PL /21/ Series Right Angle Grinders, Sanders & Drills
Parts Manual 45-8008 PL30-1012 04/21/2011 10-12 Series Right Angle Grinders, Sanders & Drills Throttle Type Free Speed (RPM) Grinders/Sanders Drills Terminations Grinders/Sanders Drills (Chuck) 12,000
More information20PTHH Pulse shut-off nutsetter
Instruction Manual P2121BA/EN 2014-06 20PTHH Pulse shut-off nutsetter For additional product information visit our website at http://www.apexpowertools.eu Notes on this instruction manual The original
More informationCorded Electric Assembly Tools 1 MILLION CYCLES MAINTENANCE-FREE*
Corded Electric Assembly Tools 1 MILLION CYCLES MAINTENANCE-FREE* Get Ready to Streamline Your Assembly Line. Streamline your assembly line and increase your return on investment. Manufacturing solutions
More informationAiretool. CC-325-HP High Pressure Water Flush Condenser Tube Cleaner. Operating & Service Manual IM 05/11/2011
Operating & Service Manual 90093-IM 05/11/2011 Airetool CC-325-HP High Pressure Water Flush Condenser Tube Cleaner For additional product information visit our website at http://www.apextoolgroup.com Safety
More information400QGDBV Series S400 & S600 In-line Positive Feed Drills
Parts Manual 8 06/0/0 400QGDBV Series S400 & S600 Inline Positive Feed Drills For additional product information visit our website at http://www.apextoolgroup.com Safety Recommendations For your safety
More information88 Series Screwdrivers
Parts Manual 8308 0/07/0 88 Series Screwdrivers For additional product information visit our website at http://www.apextoolgroup.com Safety Recommendations For your safety and the safety of others, read
More informationAutomated Systems. AutomatedSystems. Your Global Automation Solutions Partner.
Automated Systems AutomatedSystems. Your Global Automation Solutions Partner. Is YourSingle-Source ForTotal Automation Solutions. We are, part of Cooper Power Tools, a Division of Cooper Industries, which
More informationPeck Feed Drills ADVANCED DRILLING EQUIPMENT 3-1 SP EN M
Peck Feed Drills ADVANCED DRILLING EQUIPMENT SP-1300-3-EN-0806-.25M 3-1 Introduction Peck Feed Drills Our peck feed drills are a unique category unto themselves. These drills drill a short distance, then
More informationParts Manual PL /25/ Series Inline Extended Grinders
Parts Manual 45-8006 PL30-1011 04/25/2011 10-11 Series Inline Extended Grinders Throttle Type Free Speed (RPM) 3" Extension 5" Extension 28,000 25,000 28,000 25,000 Termination 300 Collet Button 10B1100
More informationModel Number Part Number (Order) Description. PATP Ram PATP-9400-P Hydraulic Pump PATP-HT Hose Tube Assembly
Operating & Service Manual 90113-IM 05/11/2011 Airetool PATP Series Pneumatic/Hydraulic Tube Puller Model Number Part Number (Order) Description PATP-9000 5524902 Ram PATP-9400-P 2999307 Hydraulic Pump
More information61MF-910 Series Non-Reversible Rotary Vane Power Motors
Parts Manual PL71-61MF-911 04/08/2011 61MF-910 Series Non-Reversible Rotary Vane Power Motors For additional product information visit our website at http://www.apextoolgroup.com Cleco MOTOR UNITS 3/4"
More informationAiretool. ATP III Electric/Hydraulic Pump. Instruction Manual PL EN 05/15/2015
Instruction Manual PL19-6000EN ATP III Electric/Hydraulic Pump For additional product information visit our website at http://www.apextoolgroup.com PL19-6000EN Specifications Pump Model Motor Motor Voltage
More information12 L * OH**
Parts Manual Ersatzteil--Liste 12L27.. series 0.9 hp ERGO Short Coupled Low Profile Grinders & Sanders 45--8175 TOOL CLASSIFICATION 12 = ERGO Grinder/Sander 12 L 2 7 12 27 08* OH** -- TYPICAL MODEL THROTTLE
More informationCordless Solutions for Critical Fastening
Cordless Solutions for Critical Fastening Up To 16* LiveWire Tools. 1 Line Controller. * Contact Regional Application Center for requirements greater than 10. WLAN Technical Data/Options: Save Up to 50%
More informationCordless Solutions for Critical Fastening
Cordless Solutions for Critical Fastening Up To 16* LiveWire Tools. 1 Line Controller. * Contact Regional Application Center for requirements greater than 10. WLAN Technical Data/Options: Save Up to 50%
More informationIndustrial Power Tools
Industrial Power Tools Index Table of Contents Page Page Page Page 14502.................. 36 22034... 11,22,23,24,25,26,27 51653.................. 35 51654.................. 35 544283PT... 9 613301.................
More information14CN Series Rivet Shaver
Parts Manual 45-8453 04/21/2011 14CN Series Rivet Shaver For additional product information visit our website at http://www.apextoolgroup.com Cleco Nomenclature 45-8453 A 14 C N L 60-95 Tool Classification
More informationEdition 10 March Air Grinder, Die Grinder and Sander. G3 Series (Angle) Parts Information. Save These Instructions
80153232 Edition 10 March 2015 Air Grinder, Die Grinder and Sander G3 Series (Angle) Parts Information Save These Instructions G3 Series (Angle) Air Grinder, Die Grinder and Sander Exploded Diagram - Body
More informationContent 1. Laserline series 3
FT LASERLINE Series TECHNICAL DATA SHEET FT LASERLINE Series 1. Laserline series Content 1. Laserline series 3 2. Connectors 4 3. Control system 4 4. Options 5 4.1 Automatic flow control 5 4.2 FT communication
More informationPARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )
Form ZA Date 0December/G Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM). Pin. Ball Bearing. Lower End Plate. O-Ring.
More informationParts Manual PL /21/ Series Right Angle Grinders & Sanders
Parts Manual 45-8025 PL30-1027-1 04/21/2011 10-27 Series Right Angle Grinders & Sanders Throttle Type Free Speed (RPM) Terminations 6,000 9,000 11,000 200 Collet 3/8"-24 Ext. Type 27 (mm) 5/8"-11 Ext.
More informationEdition 2 October Air Die Grinder. M2 Series. Parts Information. Save These Instructions
48420558 Edition 2 October 2013 Air Die Grinder M2 Series Parts Information Save These Instructions M2 Series, Air Die Grinder - Exploded View (Motor & Motor Housing) 16 1 21 14 15 13 7 5 4 3 2 12 30 28
More informationEdition 3 July Air Grinder. M2 Series. Parts Information. Save These Instructions
48420541 Edition 3 July 2015 Air Grinder M2 Series Parts Information Save These Instructions M2 Series Air Grinders - Exploded View (Motor & Motor Housing) 22 21 16 14 15 13 7 5 4 2 1 20 12 6 3 31 29 28
More informationParts Information. Air Grinders, Air Die Grinders, Air Sanders and Air Belt Sanders. Save These Instructions. G1 Series (Angle)
80156458 Edition 5 May 2014 Air Grinders, Air Die Grinders, Air Sanders and Air Belt Sanders G1 Series (Angle) Parts Information Save These Instructions G1 Series (Angle) Air Grinder, Die Grinder, Sander
More informationPARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )
PARTS LIST FOR NO. SERIES AM ANGLE TOOLS Form ZA Date 0March/F Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM).
More informationSelector Valve RV 713
Selector Valve RV 713 Key valve features RV 713 is a 3 way selector valve designed for flows up to 42gpm (160 Lpm) and max. operating pressures up to 3,625 psi (250 bar). Spools, both 2 and 3 position,
More informationMonoblock Directional Control Valve RM 230
Monoblock Directional Control Valve RM 230 Key valve features RM 230 light is a monoblock valve, designed for max. operating pressures up to 3,000 psi (210 bar) and typ. pump flows up to 20 gpm (70 Lpm).
More informationPrecision Grinders 50, ,000 RPM
Precision Grinders 50,000 100,000 RPM 0.06 0.2 hp (0.044 0.015 kw) Variety of configurations to meet all your application needs Ideal for precision deburring and metal removal Turbine, governed and nongoverned
More informationProduct Parts Information
Product Parts Information Plain, Hand Chain (Geared) and Air Powered Trolleys Models TR2U015 TR2U030 TRU060 TRU120 TRU125 TRU250 (Dwg. MHP2671) Save These Instructions Form MHD56290 Edition 3 June 2006
More information4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02
P641G RAILWAY INDEX Mitsubishi Materials is constantly engaging ultra modern technologies in the research and development of cutting tools. Results of the research provide solutions for the ever increasing
More information1700 & 1900 Series Vertical Grinders
Parts Manual 82008 0/10/2011 1700 & 1900 Series Vertical Grinders For additional product information visit our website at http://www.apextoolgroup.com Cleco Nomenclature 82008 XX XX B V X - XX Tool Series
More informationEdition 9 March Air Grinder, Die Grinder and Sander. G2 Series (Angle) Parts Information. Save These Instructions
04581237 Edition 9 March 2015 Air Grinder, Die Grinder and Sander G2 Series (Angle) Parts Information Save These Instructions G2 Series (Angle) Air Grinder, Air Die Grinder and Air Sander - Exploded Diagram
More informationParts Manual. cascade
c Parts Manual Model Serial Number Paper Roll Clamp 0G-RCP-B00R corporation OR Write: Cascade Corporation, P.O. Box 08, Portland, OR 90 Internet: www.cascorp.com 4 Decals C-4-4 RC04.ill C-4-4 SHORT ARM
More informationEdition 5 September Air Grinder, Die Grinder and Sander. G2 Series (Angle) Parts Information. Save These Instructions
04581237 Edition 5 September 2008 Air Grinder, Die Grinder and Sander G2 Series (Angle) Parts Information Save These Instructions G2 Series (Angle) Air Grinder, Air Die Grinder and Air Sander Exploded
More informationParts Manual. cascade
c Parts Manual Model Serial Number Revolving Drum Clamp D-DFR-AR0 corporation To Order Parts call: 888--, Fax: 888-9-0 OR Write: Cascade Corporation, P.O. Box 08, Portland, OR 90 Internet: www.cascorp.com
More informationParts Manual. cascade
c Parts Manual Model Serial Number 90F Roll Clamp 90F-RCP-2 corporation OR Write: Cascade Corporation, P.O. Box 208, Portland, OR 9220 Internet: www.cascorp.com All dealerships with an open account, please
More informationEdition 3 March Air Grinders and Air Die Grinders. G2 Series (Horizontal) Parts Information. Save These Instructions
04581229 Edition 3 March 2010 Air Grinders and Air Die Grinders G2 Series (Horizontal) Parts Information Save These Instructions G2 Series (Horizontal) Air Grinder and Air Die Grinder Exploded Diagram
More informationRFN Series Service and Parts
Filters RFN Series Service and Parts up to 166 gpm (630 l/min), up to 145 psi (10 bar) 1. Maintenance 1.1 General Please follow the maintenance instructions. 1.2 Installation Before installing the filter
More informationCONTENTS. General information Ordering example: Guide pillar Guide bush Ball bearing cage Strokes 32.
CONTENTS Pages General information.02 Ordering example:.04 Guide pillar.05 Guide bush.06 CA EB BA HB JB NB GB Ball bearing cage.07 PA Strokes.08 Clamp positions.09 Demountable pillar.10 EPO Middle pillar.11
More informationU.S. INDUSTRIAL TOOL INSTALLATION AND SERVICE PARTS LISTING PORTABLE OFFSET HANDLE PNEUMATIC TOOLS SERIES US7387
U.S. INDUSTRIAL TOOL INSTALLATION AND SERVICE PARTS LISTING PORTABLE OFFSET HANDLE PNEUMATIC TOOLS SERIES US7387 MOTOR HOUSING MOTOR GEAR CASE CHUCK ASSEMBLY NO. MODEL NO. ASSEMBLY NO. ASSEMBLY NO. ASSEMBLY
More informationEdition 4 August Air Grinders and Air Die Grinders. G2 Series (Horizontal) Parts Information. Save These Instructions
04581229 Edition 4 August 2015 Air Grinders and Air Die Grinders G2 Series (Horizontal) Parts Information Save These Instructions G2 Series (Horizontal) Air Grinder and Air Die Grinder - Exploded View
More informationEdition 14 August Air Impact Wrench. Models 1712B2 and 1712P2. Parts Information. Save These Instructions
03531753 Edition 14 August 2012 Air Impact Wrench Models 1712B2 and 1712P2 Parts Information Save These Instructions Model 1712B2 Air Impact Wrench - Exploded View 53 43 45 36 44 37 45A 47 35 45B 34A 56
More informationParts Manual. cascade
c Parts Manual Model Serial Number F-Series Sideshifter -SSS-A147R0 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234
More informationEdition 1 June Air Grinder and Die Grinder. TA and TXA Series, Angle. Parts Information. Save These Instructions
16574055 Edition 1 June 2006 Air Grinder and Die Grinder TA and TXA Series, Angle Parts Information Save These Instructions TA and TXA Angle Grinder and Die Grinder Exploded Diagram 41 45 60 43 46 47 40
More informationwww.martinsprocket.com AK Single Groove FHP Sheaves Bored-To-Size Martin Datum Pitch L Weight Part A(4L) 3L Stock Finished Bores Thru Lbs. Number OD Belts Belts Type Includes Keyway and Setscrew F E Bore
More informationParts Manual. cascade
c Parts Manual Model Serial Number D-RR-24A 892 corporation OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com Rotator Group 4 2 7 8 RR02.ill $ # @! 9 0 REF QTY
More informationI-Wrench for Production
I-Wrench for Production mart and Flexible. LiveWire I-Wrench Wireless. Flexible. User-Friendly. Your productivity, your freedom. ur leco LiveWire I-Wrench is a true all around production tool to meet your
More informationParts Manual. cascade
c Parts Manual Model Serial Number 0F Roll Clamp 0F-RCS-2 corporation For Technical Assistance call: 800-227-22, Fax: 888-29-8207 OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet:
More informationParts Manual. cascade
c Parts Manual Model Serial Number G Roll Clamp G-RCF-B004R0 corporation OR Write: Cascade Corporation, P.O. Box 08, Portland, OR 90 Internet: www.cascorp.com 4 Decals cascade C-4-4 RC04.ill cascade C-4-4
More informationHENRY TOOLS. General Safety and Maintenance Manual MODELS 4402-RAS 4402-RASK 4402-RASC
HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual K C Model Number 4402RAS 4402RAC Exhaust Direction Front or Side Throttle Type (L) Lever or (K) Safety Lever Speed 13500 R.P.M.
More informationParts Manual. cascade
c Parts Manual Model Sideshifter Serial Number 60E-SSS-359 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet:
More information