Parts Manual EN
|
|
- Sibyl Porter
- 6 years ago
- Views:
Transcription
1 Parts Manual 4- PL0- - Series Right Angle Grinder, Sander, and Router For additional product information visit our website at
2 4- Dotco Nomenclature X XX - XX XX XX OH Product Classification = Ergo Grinder/Sander Throttle Type L = Locking Lever S = Locking Lever (same configuration as "L") Motor Size = 0. Horsepower Tool Style = Right Angle Speed Options (RPM) Front Exhaust Rear Exhaust 00 =,000 0 =,000 0 = 0,000 = 0,000 Primary Termination Code = /"-4 External Thread Spindle (Type Cutoff Wheels) = /4"- Internal Thread Spindle 4 = /"-4 Internal Thread Spindle = /"-4 Internal Thread Spindle = 00 Series, /4" ( piece) Collet 4 = /4" Universal Collet Spindle Extended Termination Code B = Belt Sander (/4" x ") B = Belt Sander (/" x ") B = Belt Sander (/" x 4") B4 = Belt Sander (" x ") B = Belt Sander (" x 4") RT = Router Options Optinal Collets LH = Left Hand Rotation Motor Overhose Option (extra cost) OH = Exhaust Overhose (Rear exhaust models only) Page
3 Dotco Product Information 4- The original language of this manual is English. Product Safety Information: Intended Use: This pneumatic material removal tool is to be used only for removing material by utilizing appropriate abrasive wheels, rotary files or other material removal cutting devices. For product safety information and requirements for grinding without a wheel guard refer to Apex Tool Group, LLC or Apex Tool Group GmbH & Co. OHG documents: GS-00, General Safety Pneumatic Grinders CE-0, General Safety Sanders CE-0, General Safety Material Removal Tools WARNING This product must not be modified in any manner unless approved in writing by Apex Tool Group, LLC or Apex Tool Group GmbH & Co. OHG. All safety devices must be properly installed and maintained in good working order. EC Declaration of Conformity: We affirm that this machine is in accordance with the following EC regulations (00/4/EC). Applied harmonized standards are ISO 00:00-. The name, job function and address of the person authorized to compile the technical file. Mr. Vishnu Irigireddy Director of Global R&D- Mechanical Engineering Apex Tool Group 0 Industrial Drive Lexington, SC 0 Signature: Vishnu Irigireddy Date: December, 0 Noise and Vibration: L Series Noise Level: db(a) S Series Noise Level: db(a) L Series Vibration Level: <. m/s S Series Vibration Level: <. m/s Air Line Lubrication: Use Apex Tool Group, LLC or Apex Tool Group GmbH & Co. OHG s lightweight air tool oil 000 (available in quantities shown in the following chart) or an SAE- lightweight spindle oil. Part No. Packaged Designation 40 Quart (0.4 liter) Airlube 0W/NR-40LB DR 4 US Gallon (. liter) Airlube 0W/NR-40LB DR Grease: Part No. Packaged Designation 4-00 oz. (0.0 kg) Angle Head: Moly-XL SAE 0 40 oz. (0.0 kg) Planetary: Magnalube-G oz. (0.4 kg) Planetary: Magnalube-G Air Supply Line: Parameter Air Hose Minimum inside diameter: /4" (,4 mm) Maximum length:.0' (,4 m) Air Pressure Recommended: 0 psi (0 kpa) Air quality according to ISO -, quality Compressed air class.4. The compressed air must be clean and dry. Service and Repair: Tool service and repair should be performed by an authorized Apex Tool Group, LLC or Apex Tool Group GmbH & Co. OHG Center. Refer to the last page of this manual for locations. Disposal: Observe local disposal guidelines for all components of this tool and its packaging. Copyright Protection: Apex Tool Group, LLC or Apex Tool Group GmbH & Co. OHG reserves the right to modify, supplement or improve this document or the product without prior notice. This document may not be reproduced in any way, shape or form, in full or parts thereof, or copied to another natural or machine readable language or to a data carrier, whether electronic, mechanical, optical or otherwise without the express permission of Apex Tool Group, LLC or Apex Tool Group GmbH & Co. OHG Page
4 4- Dotco Front Exhaust Motor Assembly A Models (-)00 )-)0 Off Off Off Page 4
5 Dotco Front Exhaust Motor Assembly 4- Illustration "A" - Front Exhaust Models -0 Housing Wrench 0-0 Inlet Adapter 0-0 Exhaust Plug 4 O-Ring 0PT O-Ring 0-04 Filter Disc 0-0 Filter Retainer 00PT Rear Plate (includes Ref.) - Right Hand Rotation Models PT Rear Plate (includes Ref.) - Left Hand Rotation Models - Code "LH" 0- Valve Spring 0 0- Valve 0-04 Valve Seat 04 Lever Pin 0-0 Push Rod 0- Lock-Off Lever Assembly 0-00 Motor Housing 00PT Cylinder 04PT Ball Bearing 04 4 Pin 00PT 4 Rotor Blade Rotor Blade Kit (0 Blades) 0 0PT Spacer Shim Packet PT Ball Bearing 00S Rotor 4 04PT Front Plate (includes Ref. ) - Right Hand Rotation Models PT Front Plate (includes Ref. ) - Left Hand Rotation Models - Code "LH" 0-04 Lock Ring Table "A" Pinion Gear 0-04 Lock Ring Sleeve 0-0 Muffler Felt (X) Recommended Spare Parts (quantity shown based on - tools in operation) Table "A" Ref. # (-)00 # (-)0 Pinion 0-0 Page
6 4- Dotco Rear Exhaust Motor Assembly B Off Models without Overhose 0 Models (-)0 (-) Models with Overhose Off Off Page
7 Dotco Rear Exhaust Motor Assembly 4- Illustration "B" - Rear Exhaust Models -0 Housing Wrench 0-0 Inlet Adapter (without Overhose) 0-0 Inlet Adapter (Overhose Models) 0-0 Diffuser Filter Disc 0-0 Filter Retainer 0-0 Muffler (Overhose Models) 0PT O-Ring (Overhose Models) 00PT Rear Plate (includes Ref.) 0- K Valve Spring 0 0- Valve 0-04 Valve Seat 04 Lever Pin 0-0 Push Rod 0- Lock-Off Lever Assembly 0-00 Motor Housing 00PT Cylinder 04PT K Ball Bearing 04 K Pin 00PT 4 K Rotor Blade Rotor Blade Kit (0 Blades) 0 0PT Spacer K Shim Packet PT K Ball Bearing 00S Rotor 4 04PT Front Plate (includes Ref., qty. ) Lock Ring Table "B" Pinion Gear 0-04 Lock Ring Sleeve 0-0 Seal (X) Recommended Spare Parts (quantity shown based on - tools in operation) Table "B" Ref. # (-)0 # (-) Pinion 0-0 Page
8 4- Dotco Angle Head C Off 4 0 Off Service Note: Replacement rings are.00 undersize and must be expanded using service tool # 4-00 to slip onto angle housing. Page
9 Dotco Angle Head 4- Illustration "C" - Angle Head 0-04 Angle Head Cover 04PT Angle Housing (includes Ref., 4) PT Grease Fitting 4 PT Wear Ring 04PT Ball Bearing PT Lube Disc Table "C" Bevel Gear Shim Packet PT Ball Bearing 0 0PT Lock Ring Gear Lube (not shown) Grease Gun (not shown) (X) Recommended Spare Parts (quantity shown based on - tools in operation) Table "C" Ref. # (-)00 (-)0 # (-)0 (-) Bevel Gear 0-0 PT Page
10 4- Dotco Primary Terminations D Termination / -4 External Thread Termination 4 Universal Collet Termination Series 00 Collet Countersink towards spindle shoulder. Termination /4 - Internal Thread Termination 4 / -4 Internal Thread Termination / -4 Internal Thread 0 Page 0
11 Dotco Primary Terminations 4- Illustration "D" Termination - /"-4 External Thread Spindle 0PT Spindle (includes Ref. ) Spacer 0PT Woodruff Key 4-4 Flange - Flange - Wheel Guard (includes Ref. ) - Cap Screw /" Wrench (not shown) /" Wrench (not shown) /4" Wrench (not shown) Termination - /4"- Internal Thread Spindle 0 Spindle 0PT Woodruff Key 0-00 /" Wrench Termination 4 - /"-4 Internal Thread Spindle 4 Spindle 0PT Woodruff Key -00 /" Wrench Termination - /"-4 Internal Thread Spindle 0PT Spindle 0PT Woodruff Key -00 /" Wrench Termination - 00 Series, /4" ( piece) Collet 0PT Spindle 0PT Woodruff Key Table "D" Collet (/4") 0 0PT Nosepiece -00 /" Wrench -0 /" Wrench Termination 4 - Universal Collet S Spindle 0PT Woodruff Key 4 Table "D" Collet (/4") Collet Nut -00 /" Wrench -0 /" Wrench (X) Recommended Spare Parts (quantity shown based on - tools in operation) Table "D" 00 Series Optional Collets Part No. Arbor Size Part No. Arbor Size Part No. Arbor Size 0PT /4" 0PT /" 0PT mm 0PT /4" 0PT /" 0 /" 0PT * /4" 04PT /" mm * Standard Collet Table "D" Universal Series Optional Collets Part No. Arbor Size Part No. Arbor Size Part No. Arbor Size 0 /" mm /" 0PT * /4" 0PT mm * Standard Collet Page
12 4- Dotco Extended Terminations E Termination -RT (Router) 4 F Termination -B (/4 x Belt Sander) 4 0 Page
13 Dotco Extended Terminations 4- Illustration "E" - Router Termination (RT) Router Housing Assembly (includes Ref. -4) 0 Retaining Ring -00 Ball Bearing 4 - Screw (#- x. SHCS) (X) Recommended Spare Parts (quantity shown based on - tools in operation) Illustration "F" - Belt Sander Termination B -- -S Belt Sander Assembly (includes Ref. -) - Guard PT Screw - Spacer 4 - Boom 00PT 4 Screw PT Pin -4 Cushioned Platen 04PT Yoke Spring - Yoke 0 PT Yoke Pin Wheel Assembly (includes Ref. -) 4PT Ball Bearing -04 Wheel (includes Ref. ) - Tire - Spacer -0 Drive Wheel (B Termination) (includes Ref. ) -0 Drive Wheel (B Termination) (includes Ref. ) -04 Tire - Sanding Belt (0 Grit) - Sanding Belt (0 Grit) (X) Recommended Spare Parts (quantity shown based on - tools in operation) Page
14 4- Dotco Extended Terminations G Termination -B (/ x Belt Sander) H Termination -B (/ x 4 Belt Sander) Page
15 Dotco Extended Terminations 4- Illustration "G" - Belt Sander Termination B -- -0S Belt Sander Assembly (includes Ref. -) - Guard PT Screw - Boom 4 - Steel Platen 0PT 4 Screw 00PT 4 Screw 0 4 Nylon Washer PT Pin - Cushioned Platen 0 04PT Yoke Spring - Yoke 0PT Yoke Pin -- - Wheel Assembly (includes Ref. -) 4PT 4 Ball Bearing - Wheel (includes Ref. ) -0 Tire 4PT Spacer -0 Drive Wheel (B Termination) (includes Ref. ) -0 Drive Wheel (B Termination) (includes Ref. ) -04 Tire 0-4 Sanding Belt (0 Grit) - Sanding Belt (0 Grit) (X) Recommended Spare Parts (quantity shown based on - tools in operation) Illustration "H" - Belt Sander Termination B -- -S Belt Sander Assembly (includes Ref. -) - Guard PT Screw -0 Boom 4 - Steel Platen 0PT 4 Screw 00PT 4 Screw 0 4 Nylon Washer PT Pin -4 Cushioned Platen 0 04PT Yoke Spring - Yoke 0PT Yoke Pin -- - Wheel Assembly (includes Ref. -) 4PT 4 Ball Bearing - Wheel (includes Ref. ) -0 Tire 4PT Spacer -0 Drive Wheel (B Termination) (includes Ref. ) -0 Drive Wheel (B Termination) (includes Ref. ) -04 Tire 0 - Sanding Belt (0 Grit) - Sanding Belt (0 Grit) (X) Recommended Spare Parts (quantity shown based on - tools in operation) Page
16 4- Dotco Extended Terminations I Termination -B4 ( x Belt Sander) J Termination -B ( x 4 Belt Sander) Page
17 Dotco Extended Terminations 4- Illustration "I" - Belt Sander Termination B Belt Sander Assembly (B4 Termination) (includes Ref. -) -- - Belt Sander Assembly (B4 Termination) (includes Ref. -) - Guard - Guard - Screw 4-4 Boom - Steel Platen 0PT Screw 4 Screw 0 Nylon Washer - Cushioned Platen 0-4 Yoke Spring - Yoke PT 4 Yoke Screw -0 Yoke Pin -- - Wheel Assembly (includes Ref. -) 4PT 4 Ball Bearing - Wheel (includes Ref. ) -0 Tire - Spacer 4PT Spacer - Drive Wheel (B4 Termination) (includes Ref. ) 0-0 Drive Wheel (B4 Termination) (includes Ref. ) -04 Tire -04PT Wrench (/") (not shown) - Sanding Belt (0 Grit) - Sanding Belt (0 Grit) (X) Recommended Spare Parts (quantity shown based on - tools in operation) Illustration "J" - Belt Sander Termination B Belt Sander Assembly (B Termination) (includes Ref. -) -- - Belt Sander Assembly (B Termination) (includes Ref. -) - Guard - Guard - Screw 4 - Boom - Steel Platen 0PT Screw 4 Screw 0 Nylon Washer -4 Cushioned Platen 0-4 Yoke Spring - Yoke PT 4 Yoke Screw -0 Yoke Pin -- - Wheel Assembly (includes Ref. -) 4PT 4 Ball Bearing - Wheel (includes Ref. ) -0 Tire - Spacer 4PT Spacer - Drive Wheel (B Termination) (includes Ref. ) 0-0 Drive Wheel (B Termination) (includes Ref. ) -04 Tire -04PT Wrench (/") (not shown) -4 Sanding Belt (0 Grit) -4 Sanding Belt (0 Grit) (X) Recommended Spare Parts (quantity shown based on - tools in operation) Page
10LF and 12LF Series Right Angle Grinder and Sander
Product Manual 4-42 0LF and LF Series Right Angle Grinder and Sander For additional product information visit our website at http://www.apextoolgroup.com 4-42 Dotco Nomenclature XX L F 2 XX - XX XX XX
More informationParts Manual EN
Parts Manual 4-83EN PL30- - Series Right Angle Grinder, Sander, and Router For additional product information visit our website at http://www.apextoolgroup.com 4-83EN Dotco Nomenclature X XX - XX XX XX
More informationParts Manual EN
Parts Manual 45-8213EN PL30-1212 12L12 and 12S12 Series 0.3 HP Right Angle Grinder/Sander For additional product information visit our website at http://www.apextoolgroup.com 45-8213EN Dotco Nomenclature
More information10LF and 12LF Series Right Angle Grinder and Sander
Product Manual 4-842EN 10LF and LF Series Right Angle Grinder and Sander For additional product information visit our website at http://www.apextoolgroup.com 4-842EN Dotco Nomenclature XX L F 2 XX - XX
More information12-10 Series Inline Grinder
Parts Manual 45-858EN 2-0 Series Inline Grinder Termination -36 Terminations -4 and -6 For additional product information visit our website at http://www.apextoolgroup.com 45-858EN Dotco Nomenclature and
More informationParts Manual EN PL /18/ L41 Series Inline Extended Grinders
Parts Manual 45-8188EN PL30-850 12L41 Series Inline Extended Grinders For additional product information visit our website at http://www.apextoolgroup.com 45-8188EN Dotco Nomenclature 12 L 4 1 XX - XX
More information10LF and 12LF Series Right Angle Grinders
Product Manual 10LF and 12LF Series Right Angle Grinders XX L F 2 XX - XX Tool Series 10 = Aluminum Housing 12 = Ergo Housing Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 2 = Right
More information15K Series Extented Mini Right Angle Drill Attachment
Parts Manual PL30-2052EN 15K27-5172 Series Extented Mini Right Angle Drill Attachment For additional product information visit our website at http://www.apextoolgroup.com PL30-2052EN Dotco Nomenclature
More informationParts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder
Parts Manual PL30-12R04 12R04 Series 0.1 HP Inline Pencil Grinder For additional product information visit our website at http://www.apextoolgroup.com Dotco Nomenclature 12 R 04 XX - X X Series 12 = Ergo
More informationParts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at
Parts Manual 10L4321 Router For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language of this manual is English. Product Safety Information:
More information15D Series Pistol Grip and Inline Drills
Parts Manual 823144EN 15D Series Pistol Grip and Inline Drills For additional product information visit our website at http://www.apextoolgroup.com 823144EN Cleco Product Information The original language
More information10N M6 Series Right Angle Grinder
Parts Manual PL30-2042EN 10N1200-36M6 Series Right Angle Grinder For additional product information visit our website at http://www.apextoolgroup.com PL30-2042EN Dotco Nomenclature and Specifications Product
More information10N10 Series Inline Grinder
Parts Manual 0N0 Series Inline Grinder For additional product information visit our website at http://www.apextoolgroup.com Nomenclature and Specifications Product Type 0 = Aluminum Housing Grinder Throttle
More information75RM-2024 Right Angle Fixtured Nutrunner
Instruction Manual PL12-1092EN 75RM-2024 Right Angle Fixtured Nutrunner For additional product information visit our website at http://www.apextoolgroup.com Cleco Product Information PL70-1092EN The original
More information10R90 Series Light Duty Precision Turbine Grinder
Parts Manual 45-8043 10R90 Series Light Duty Precision Turbine Grinder CAUTION Do Not Lubricate This Tool! For additional product information visit our website at http://www.apextoolgroup.com 45-8043 Dotco
More informationN60 Rotary Vane Pneumatic Motor
Parts Manual PL70-1043EN 24-1312N60 Rotary Vane Pneumatic Motor For additional product information visit our website at http://www.apextoolgroup.com PL70-1043EN Cleco 24-1312N60 Rotary Vane Motor Model
More informationParts Manual EN
Parts Manual PL30-1211 12-11 Series Inline Extended Grinders For additional product information visit our website at http://www.apextoolgroup.com Nomenclature 12 X 1 1 XX - 36 XX OH Tool Series 12 = Ergo
More information14PTA & 14TTA Series Pistol Grip Nutrunners
Parts Manual 4PTA & 4TTA Series Pistol Grip Nutrunners 4PTA Series 4TTA Series For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language
More informationParts Manual PL
Parts Manual PL30-027-7 45-828 03/0/20 0L27 & 0K27 Series Low Profile Right Angle Grinder/Sander 2 Series Handles Shown Throttle Type Free Speed (RPM) Grinders / Sanders Termination 2,000 3,500 4,500 Type
More information12 L * OH**
Parts Manual Ersatzteil--Liste 12L27.. series 0.9 hp ERGO Short Coupled Low Profile Grinders & Sanders 45--8175 TOOL CLASSIFICATION 12 = ERGO Grinder/Sander 12 L 2 7 12 27 08* OH** -- TYPICAL MODEL THROTTLE
More information88 Series Inline and Pistol Grip Screwdrivers
Parts Manual 823018EN 88 Series Inline and Pistol Grip Screwdrivers For additional product information visit our website at http://www.apextoolgroup.com 823018EN Cleco Nomenclature 88 XXX A XX - X C X
More informationA6R-2218 Reversible Axial Piston Power Motors
Instruction Manual A6R-2218 Reversible Axial Piston Power Motors For additional product information visit our website at http://www.apextoolgroup.com Nomenclature Model Number Maximum Allowable RPM * Stall
More informationA6R-2221 Reversible Axial Piston Power Motor
Instruction Manual A6R-2221 Reversible Axial Piston Power Motor For additional product information visit our website at http://www.apextoolgroup.com Nomenclature Model Number Maximum Allowable RPM Stall
More information21L1341 Series Inline Vent Trimmer
Parts Manual 21L1341 Series Inline Vent Trimmer For additional product information visit our website at http://www.apextoolgroup.com Nomenclature Includes (Illustration "B") Model Vent Trimmer Drive Pinion
More informationParts Information. Air Grinders, Air Die Grinders, Air Sanders and Air Belt Sanders. Save These Instructions. G1 Series (Angle)
80156458 Edition 5 May 2014 Air Grinders, Air Die Grinders, Air Sanders and Air Belt Sanders G1 Series (Angle) Parts Information Save These Instructions G1 Series (Angle) Air Grinder, Die Grinder, Sander
More informationB4R Series Reversible Axial Piston Power Motors
Instruction Manual B4R Series Reversible Axial Piston Power Motors For additional product information visit our website at http://www.apextoolgroup.com Nomenclature Model Number Maximum Allowable RPM Stall
More informationEdition 10 March Air Grinder, Die Grinder and Sander. G3 Series (Angle) Parts Information. Save These Instructions
80153232 Edition 10 March 2015 Air Grinder, Die Grinder and Sander G3 Series (Angle) Parts Information Save These Instructions G3 Series (Angle) Air Grinder, Die Grinder and Sander Exploded Diagram - Body
More information21 Series Double Reduction Rotary Vane Power Motors
Instruction Manual 45-8059EN Series Double Reduction Rotary Vane Power Motors For additional product information visit our website at http://www.apextoolgroup.com 45-8059EN Cleco General Information For
More information35 Series Screwdrivers
Parts Manal 823121EN 35 Series Screwdrivers For additional product information visit our website at http://www.apextoolgroup.com 823121EN Cleco Description Language Version: This Parts Manual is the Original
More information19RA Series Right Angle Nutrunner
Parts Manual P12-1014EN 19RA Series Right Angle Nutrunner For additional product information visit our website at http://www.apextoolgroup.com P12-1014EN Cleco Model Nomenclature A 19 R A X XX XX X Tool
More informationProduct Manual PL31-15LF 04/02/ LF Series Inline Grinders
Product Manual PL31-15LF 15LF Series Inline Grinders 15 L F 0 X X - XX NL Tool Series 15 = Drill Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 0 = Straight Exhaust Type 5 = Front Exhaust
More informationEdition 2 October Air Die Grinder. M2 Series. Parts Information. Save These Instructions
48420558 Edition 2 October 2013 Air Die Grinder M2 Series Parts Information Save These Instructions M2 Series, Air Die Grinder - Exploded View (Motor & Motor Housing) 16 1 21 14 15 13 7 5 4 3 2 12 30 28
More information3,200 RPM Angle-Head WARNING
Model: 50046 Angle-Head Kit 54002 Mini-Dynorbital Sander 54003 Mini-Dynorbital Sander 50223 2" Disc Sander 51091 Die Grinder 53026 Drill 50047 3" Buffer 50070 Finesse Sanding Kit Parts Page Reorder No.
More informationEdition 9 March Air Grinder, Die Grinder and Sander. G2 Series (Angle) Parts Information. Save These Instructions
04581237 Edition 9 March 2015 Air Grinder, Die Grinder and Sander G2 Series (Angle) Parts Information Save These Instructions G2 Series (Angle) Air Grinder, Air Die Grinder and Air Sander - Exploded Diagram
More informationEdition 5 September Air Grinder, Die Grinder and Sander. G2 Series (Angle) Parts Information. Save These Instructions
04581237 Edition 5 September 2008 Air Grinder, Die Grinder and Sander G2 Series (Angle) Parts Information Save These Instructions G2 Series (Angle) Air Grinder, Air Die Grinder and Air Sander Exploded
More information48EP Series Electronically Controlled Pistol Grip Nutrunner
Parts Manual PL2EN-48EP- 0/09/202 48EP Series Electronically Controlled Pistol Grip Nutrunner For additional product information visit our website at http://www.apextoolgroup.com PL2EN-48EP- 0/09/202 Cleco
More information14TTA-2311 Pistol Grip Clecomatic Clutch Nutrunner
Parts Manual 14TTA-2311 Pistol Grip Clecomatic Clutch Nutrunner For additional product information visit our website at http://www.apextoolgroup.com Model Nomenclature A 14 T T A - 2311 Tool Series 14
More information1700 and 1900 Series Horizontal Grinders
Instruction Manual 823136EN 1700 and 1900 Series Horizontal Grinders For additional product information visit our website at http://www.apextoolgroup.com 823136EN Cleco General Information For this Instruction
More informationSanders, Buffers & Polishers Introduction
Sanders, Buffers & Polishers Introduction Dotco sanders, buffers and polishers are available in a variety of styles and power ratings to provide flexibility in choosing the best tool for the job. Disc
More informationMaintenance Information
04581245 Edition 2 May 2014 Air Grinder, Die Grinder and Sander Series G2 (Angle) Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings,
More informationEdition 4 August Air Grinders and Air Die Grinders. G2 Series (Horizontal) Parts Information. Save These Instructions
04581229 Edition 4 August 2015 Air Grinders and Air Die Grinders G2 Series (Horizontal) Parts Information Save These Instructions G2 Series (Horizontal) Air Grinder and Air Die Grinder - Exploded View
More information48EP Series Electronically Controlled Pistol Grip Nutrunner
Parts Manual PL2EN-8EP /0/20 8EP Series Electronically Controlled Pistol Grip Nutrunner For additional product information visit our website at http://www.apextoolgroup.com PL2EN-8EP /0/20 Cleco General
More informationPARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )
Form ZA Date 0December/G Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM). Pin. Ball Bearing. Lower End Plate. O-Ring.
More informationCP3650 Series CP AB & CP AB Angle Sanders
32 CP3650-20AB CP3650-075AB rpm CP3650-20AB 2000 CP3650-075AB 7500 Index No. Parts No. Description Qty Index No. Parts No. Description Qty 653967390 Adaptater 6 654300330 Inlet 7 656452290 Disc Spring
More informationHydraulic Angle Grinder for Underwater Use Type
M a s c h i n e n f a b r i k G m b H Hydraulic Angle Grinder for Underwater Use Type 1 1585 0010 Illustration can differ from the original Repair Manual and Spare Parts List Compiled: 18.01.13 115850010_Inst_en_Version_03
More informationMaintenance Information
80234313 Edition 2 May 2014 Air Grinder, Die Grinder, Sander and Belt Sander Series G1 (Angle) Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the
More information14RA Series Right Angle Nutrunners
Parts Manual 822EN RA Series Right Angle Nutrunners For additional product information visit our website at http://www.apextoolgroup.com 822EN Cleco General Information anguage Version: This Parts Manual
More informationEdition 1 June Air Grinder and Die Grinder. TA and TXA Series, Angle. Parts Information. Save These Instructions
16574055 Edition 1 June 2006 Air Grinder and Die Grinder TA and TXA Series, Angle Parts Information Save These Instructions TA and TXA Angle Grinder and Die Grinder Exploded Diagram 41 45 60 43 46 47 40
More informationParts Manual PL C 12/28/2010. MP4400 Series (Type 4) Random Orbital Sander. Non-Vacuum Models. Vacuum Models MP 44 XX - XX XX
Parts Manual MP4400 Series (Type 4) Random Orbital Sander Non-Vacuum Models Vacuum Models MP 44 XX - XX XX Orbit Pattern 00 = 3/6" Offset (Black Handle) - Standard Sanding Orbit 03 = 3/32" Offset (Chrome
More informationAiretool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015
Operating & Service Manual PL9-6026EN 0/0/205 Airetool Gas Line Cleaners Range: 3/4 (9.05mm) to -/2 (38.0mm) For additional product information visit our website at http://www.apextoolgroup.com PL9-6026EN
More information0.4 hp. Right Angle Tools
0.4 hp. Right Angle Tools Models: 50210, 50211, 50561, 50570 Lubricants: 95842 Dynabrade Air Lube 10W/NR 95848 Gear Oil Lubricant Gun: 95541 Push-Type Gun 0.4 hp. Right Angle Tools Models: 50210, 50211,
More informationSW100PRY220 ( ) Reversible Pistol Grip Swivel Reaction Bar Nutrunner
Parts Manual PL2-029EN Formerly: PC-468-5080 SW00PRY220 (4685080) Reversible Pistol Grip Swivel Reaction Bar Nutrunner Caterpillar # 8T-590 For additional product information visit our website at http://www.apextoolgroup.com
More informationBP 3050, 3050 R. Spare parts list. Bulk pulverizer. BP 3050 s/n DEQ BP 3050 R s/n DEQ
BP 3050, 3050 R Spare parts list Bulk pulverizer BP 3050 s/n DEQ169179 - BP 3050 R s/n DEQ169179-2018 Construction Tools GmbH No. 3390758101 2018-01-01 General information This spare parts list applies
More informationBP 2050, 2050 R. Spare parts list. Bulk pulverizer. BP 2050 s/n DEQ BP 2050 R s/n DEQ
BP 2050, 2050 R Spare parts list Bulk pulverizer BP 2050 s/n DEQ169181 - BP 2050 R s/n DEQ169181-2018 Construction Tools GmbH No. 3390756701 2018-01-01 General information This spare parts list applies
More informationHENRY TOOLS. General Safety and Maintenance Manual MODELS 4402-RAS 4402-RASK 4402-RASC
HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual K C Model Number 4402RAS 4402RAC Exhaust Direction Front or Side Throttle Type (L) Lever or (K) Safety Lever Speed 13500 R.P.M.
More informationOutput 0.9 H.P. (675 W) 9000 to R.P.M (11000rpm is standard)
HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual COLLET SPINDLE SHOWN Model Number Exhaust Direction Throttle Type 44RAE Side (L) Lever or (K) Safety Lever Speed 9000 to 11000
More informationEdition 3 March Air Grinders and Air Die Grinders. G2 Series (Horizontal) Parts Information. Save These Instructions
04581229 Edition 3 March 2010 Air Grinders and Air Die Grinders G2 Series (Horizontal) Parts Information Save These Instructions G2 Series (Horizontal) Air Grinder and Air Die Grinder Exploded Diagram
More informationPencil Grinders hp, 0.4 hp Die Grinders hp Die Grinders hp Die Grinders...101
Pencil Grinders...92 0.33 hp, 0.4 hp Die Grinders...95 0.4 hp Die Grinders...96 0.5 hp Die Grinders...101 0.55 hp Die Grinder...104 0.7 hp Die Grinders...105 1.0 hp Die Grinders...107 92 Pencil Grinders
More informationMA3W-2238 Radial Piston Power Motor
Parts Manual MA3W-2238 Radial Piston Power Motor For additional product information visit our website at http://www.apextoolgroup.com Specifications and Description Specifications Table: Model Maximum
More informationMaintenance Information
80234313 Edition 1 June 2006 Air Grinder, Die Grinder, Sander and Belt Sander Series G1 (Angle) Maintenance Information Save These Instructions WARNING Always wear eye protection when operating or performing
More informationDisassembly Instructions hp. Mini-Dynafile II
Disassembly Instructions - 0.4 hp. Mini-Dynafile II Important: Use these instructions along with the tool parts page or manual. Notice: Shut off the air supply and depress throttle lever to deplete the
More informationPrecision Grinders 50, ,000 RPM
Precision Grinders 50,000 100,000 RPM 0.06 0.2 hp (0.044 0.015 kw) Variety of configurations to meet all your application needs Ideal for precision deburring and metal removal Turbine, governed and nongoverned
More informationCP3850 Series Grinders
1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 X 5 Ring screw 6156731760 1 1 1 1 1 X 6 Autobalancer
More informationMODELS 48 RA 48 BRA2 48 BRA4 48 BRAD 48 RAS 48 RAZ 48 RAD 48 RAC
General Safety and Maintenance Manual Model Number 48BRA 48BRAZ 48BRAC 48BRAD Exhaust Direction Front or Side Throttle Type (L) Lever or (K) Safety Lever Speed 9000 to 11000 R.P.M. (11000 is Standard)
More informationHydro Cut Series Walk-Behind Mowers
Parts Manual HP Product Mfg. No. Description 92 Hydro Cut, HP Kawasaki, 2 inch (CE) Hydro Cut Series Walk-Behind Mowers Rev. 0/200 Table Of Contents PRODUCT COMPONENTS PAGES Engine Deck & Handle Bars
More informationEdition 3 July Air Grinder. M2 Series. Parts Information. Save These Instructions
48420541 Edition 3 July 2015 Air Grinder M2 Series Parts Information Save These Instructions M2 Series Air Grinders - Exploded View (Motor & Motor Housing) 22 21 16 14 15 13 7 5 4 2 1 20 12 6 3 31 29 28
More informationAiretool. 999-C-45 ( ) Electric Rolling Motor. Operating & Service Manual PL EN 01/26/2012
Operating & Service Manual PL19-6009EN 999-C-45 (8405492) Electric Rolling Motor For additional product information visit our website at http://www.apextoolgroup.com PL19-6009EN Description Tool Specifications
More informationCB Spare parts list. Hydraulic concrete buster. CB 2500 s/n DEQ Construction Tools GmbH No
CB 2500 Spare parts list Hydraulic concrete buster CB 2500 s/n DEQ169050-2018 Construction Tools GmbH No. 3390787501 2018-11-22 General information This spare parts list applies to the following: Part
More information41NDR Series Air Shut-Off Ratchet Wrench
Instruction Manual PL17EN-41NDR 41NDR Series Air Shut-Off Ratchet Wrench For additional product information visit our website at http://www.apextoolgroup.com PL17EN-41NDR Cleco General Information For
More informationRepair Manual and Spare Parts List
Hydraulic Drive Unit Type Techn. Doc. No. 362 and Accessories for Pipe Cutting Machine Darstellung kann vom Original abweichen Repair Manual and 580067000_Inst_en_Version_03 Repair General In general,
More information55407 Spring. 15 mm Pin Wrench
Disassembly Instructions - Variable Speed Pencil Grinder, 60K MAX. Models: 52850, 52855 Important: Use these instructions along with tool parts page or manual. Notice: Shut off air supply. Open 51665 ON/OFF
More informationDIEMAKERS RIFFLERS (18cm)
45 DIEMAKERS RIFFLERS (18cm) 12700 12795 Prices Each Ref.No. Cut 0/2 12700-12732 12740-12763 19.55 12764 12771 19.55 12781 12782 12783 12790-12795 19.55 Less 10% for 6+ of any one shape/cut 46 H3 Short
More informationSpecial Applications Require Special Tools
Index Routers.................. 102-103 Tappers..................... 104 Clinch Nut Tools.............. 106 Rivet Shavers................ 107 Skin Clamp Runners........... 108 Saws................... 109-110
More information4405-RA 4405-R 4405-RA 4405-R S
ACCESSORIES Page 34 Master Parts Breakdowns Updated Feb. 1st 2006 Master Parts Breakdowns Updated Feb. 1st 2006 Page 35 This tool is designed to operate on 90 psig (6.2 bar) maximum air pressure with 1/4
More informationDisassembly Instructions hp. Dynafile II Models: 40352, 40353
Disassembly Instructions - 0.4 hp. Dynafile II Models: 40352, 40353 Important: Use these instructions along with the tool parts page or manual. Notice: Shut off the air supply and depress throttle lever
More informationMM Series Radial Piston Power Motors
Instruction Manual MM Series Radial Piston Power Motors For additional product information visit our website at http://www.apextoolgroup.com Specifications Model Number Maximum Allowable Stall Starting
More informationSIOUX TOOLS FORCE PRODUCT CATALOG ABRASIVE
SIOUX TOOLS FORCE PRODUCT CATALOG ABRASIVE Abrasive Index Straight Die Grinders......................... 25 Right Angle Die Grinders...................... 26 23 SIOUX TOOLS FORCE PRODUCT CATALOG Make Easy
More informationPARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )
PARTS LIST FOR NO. SERIES AM ANGLE TOOLS Form ZA Date 0March/F Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM).
More informationCP3850 Series Grinders
1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 1 1 X 5 Ring screw 6156731760 1 1
More informationFor maximum material removal with minimum effort, choose the best tool.
RediPower For maximum material removal with minimum effort, choose the best tool. How to select your Grinder Collet grinders Choose your tool, then your accessory: carbide burrs, mounted points, brushes,
More informationPneumatic Corner Drill
Maschinenfabrik GmbH Pneumatic Corner Drill Type 2 1602 0030 Illustration can differ from the original Operation and Maintenance Manual Compiled: 31.07.08 216020030_en.doc Page 1 of 12 TECHNICAL SPECIFICATION
More informationClassic12 Belt Sander
Classic12 Belt Sander Section II Parts and Service Manual AMERICAN SANDERS TECHNOLOGY Classic 12 Belt Sander Operator's Manual Page 21 Assembly Drawing #1 11/00 7 8 9 12 13 11 1 10 85 14 6 81 80 79 76
More informationPARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE SCREWDRIVERS
PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE SCREWDRIVERS NON-REVERSING HANDLE ASSEMBLY (SERIAL NO S. STARTING WITH B & D ) Fig. Part Form A278F Date 10-00/B Page 1 of 6 4. 14309 Ring O 5. 14312 Ring
More informationDisassembly Instructions hp Dynafile
Disassembly Instructions - 0.5 hp. 14000 Dynafile Important: Use these instructions along with the tool parts page or manual. Notice: Shut off the air supply and depress throttle lever to dissipate the
More informationTable of contents Copyright ANDREAS STIHL AG & Co. KG 2017 (3)
03-2016 USA Table of contents FS 94, FS 94 C, FS 94 R, FS 94 RC 4 Crankcase, Cylinder 6 Rewind starter 8 Rewind starter ErgoStart/Easy2Start 10 Muffler, Shroud, Ignition system 12 Fuel tank 14 Air filter,
More informationSlow Speed Dynafile II
For Serial No. 1D1000 and Higher Parts Page Reorder No. PD01 54 Effective June, 2001 Slow Speed Dynafile II Models: 40381 Slow Speed Dynafile II Air Motor and Machine Parts! WARNING Always operate, inspect
More informationAFM-14 PART NO Revised: 10/9/01
31-278 & 31-280 6 BELT/12 DISC SANDING CENTER AFM-14 PART NO. 406-12-651-0005 Revised: 10/9/01 Page1/AFM-14/DEB 1 406-12-031-0001 UPPER IDLER COVER 2 406-12-138-0001 KNOB 3 406-12-020-0001 END CAP * 406-12-362-0003
More informationRepair Manual and Spare Parts List
Pneumatic Drive Unit Type Techn. Doc. No. 352 and Accessories for Pipe Cutting Machine Darstellung kann vom Original abweichen Repair Manual and 580027000_Inst_en_Version_02 Repair General In general,
More informationMODELS 45 RA 45 RAC 45 RAZ 45 RAS
General Safety and Maintenance Manual Model Number 45RA 45RAZ 45RAS 45RAC SERIES PNEUMATIC RIGHT ANGLE GRINDER Exhaust Direction Side Throttle Type (L) Lever or (K) Safety Lever Speed 12000 to 14000 R.P.M
More informationEdition 1 May Air Grinder and Die Grinder. HD, HX and HXD Series, Horizontal. Parts Information. Save These Instructions
16574048 Edition 1 May 2006 Air Grinder and Die Grinder HD, HX and HXD Series, Horizontal Parts Information Save These Instructions HD, HX and HXD Grinder and Die Grinder Exploded Diagram 9A 9 12 1413
More informationMaterial Removal Tools
Material Removal Tools mdi - Manufacturers Distributor, Inc Phone: (813) 241-4900 Fax: (813) 571 0422 www.dotcosales.com Sales@DotcoSales.com Model Number Index Model Page 10B1200-32 43 10B2500-01 16 10L1000-36
More information20-G SERIES PRECISION DIE GRINDERS (.2 hp) 40-G & 41-G SERIES DIE GRINDERS (.9 hp) 4110 & 4111 SERIES DIE GRINDERS (.9 hp)
20-G SERIES PRECISION DIE GRINDERS (.2 hp) DIE GRINDER KIT (Add a "K" to end of tool model number). Includes: (1) 20-G or 20-GM (1) 3 /,6" dia. x 5' long hose (4) '/a" carbide burrs - Cylindrical plain
More informationPneumatic Power Motors
Pneumatic Power Motors Buckeye Dotco Gardner-Denver SP-104-EN 0405 10M Table of Contents ISO-9001 Quality System Certified...................... 1 Model Number Index.................................. 2
More informationPneumatic Angle Grinder also for Underwater Use Type
M a s c h i n e n f a b r i k G m b H Pneumatic Angle Grinder also for Underwater Use Type 1 4311 0050 Illustration can differ from the original Repair Manual and Spare Parts List Compiled: 22.06.11 143110050_Inst_en_Version_00
More informationB11 SUM 500L (TBC 4500) 9 septembre 2003 Y258200
SUM 500L (TBC 4500) 9 septembre 2003 Y258200 SUM-500L CYLINDER/PISTON/CRANK SHAFT 01 Ref. Part No. Description Q'ty 006 157-11666-90 SPARK PLUG CAP ASS'Y 1 007 255-04200-20 SPARK PLUG RUBBER COVER 1 008
More informationBEFCO. Parts Manual CYCLONE EZ-FLEX. Three Point Hitch Gang Grooming Mower Front or Rear Mount 112-EZFA, 115-EZFA. Manual B July 2010
BEFCO Parts Manual CYCLONE EZ-FLEX Three Point Hitch Gang Grooming Mower Front or Rear Mount -EZFA, 5-EZFA Manual 97-7B July 00 BEFCO PM, 5-EZF (US) Printed on July, 00 Parts Manual EZFA- Ver. E EZFA-5
More informationMICHIGAN PNEUMATIC TOOL
MICHIGAN PNEUMATIC TOOL Industrial Air Tools Grinders 2016 Serving All Industries Petro Chemical Aircraft Assembly Foundry Rental 1-800-521-8104 www.michiganpneumatic.com MATERIAL REMOVAL Right Angle Grinders
More informationVacuum Models Central Vacuum Pencil Grinder hp Vacuum Die Grinders hp Vacuum Die Grinders hp Vacuum Die Grinders...
Non-Vacuum s Pencil Grinders...47 Quick-Change Pencil Grinder...49.4 hp Die Grinders...52.5 hp Die Grinders...59.55 hp Die Grinder...62.7 hp Die Grinders...63 1 hp Die Grinders...67 Vacuum s Central Vacuum
More informationGeneral Safety and Maintenance Manual. Output. Type 0.9 H.P.675 W. (L) Lever or (K) Safety Lever R.P.M. (18000PM is standard)
HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual SUPER EXTENDED LENGTH DIE GRINDER FEATURING FRONT END DOUBLE ROW BEARINGS FOR SUPPORT. Multiple accessory mounting is possible
More informationGeneral Safety and Maintenance Manual
General Safety and Maintenance Manual MODEL 52H HORIZONTAL GRINDER WITH 6 GUARD MODEL 52HG HORIZONTAL GRINDER WITH 6 GUARD MODEL 52HSJ HORIZONTAL GRINDER WITH CONE WHEEL INSTALLED. 2 H.P. HORIZONTAL GRINDERS
More information