MAKING MODERN LIVING POSSIBLE. Danfoss Air Flex Catalogue DANFOSS HEATING

Transcription

1 MAKING MODERN LIVING POSSIBLE Danfoss Air Flex Catalogue DANFOSS HEATING

2 Danish Indoor Climate Labelling Certificate no. Danish Indoor Climate Labelling hereby certifies that the product group Danfoss Air Flex manufactured by Danfoss A/S Ulvehavevej DK-7 Vejle has been approved and awarded a labelling licence The declared indoor-relevant time-value has been determined according to the labelling criteria listed in the following documents issued by the Danish Indoor Climate Labelling: Testing and Labelling Criteria for Furniture, rd edition, and General Labelling Criteria, th edition, 7 The certificate is based on tests of a flexible LDPE/HDPE tube The certificate is valid years from: th October 9 and is subject to annual renewal by attestation of the Schedule - to this certificate according to the procedures of Danish Indoor Climate Labelling. Danish Indoor Climate Labelling may withdraw the rights to use this Certificate in case the company does not meet the requirements. This certificate including schedule - can also be found at: For Danish Indoor Climate Labelling Certification Manager Date..9 VKEWB Danfoss /9

3 Flex pipe Technical data Pressure loss per m [Pa] Danfoss flex pipe - Ø7 mm, straight 7 Flex coupling Used in ventilation systems that require a high level of flexibility - for both supply and exhaust. The raw material consists of environmentally-friendly polystyrene (PE), with no admixtures. Chemical resistance PE is resistant to almost all media (alcohol, grease, mineral oil, etc.). Only concentrated and highly oxidised acids can affect PE. Standard/classification All tubes listed below meet the requirements set out in DIN EN -. Order number Type Ext. diameter Int. diameter Length Weight 9F DFP- Ø Ø m. kg 9F DFP-7 Ø7 Ø m. kg 9F DFP-9 Ø9 Ø7 m 9. kg Pressure loss [Pa/9 degrees] Danfoss flex pipe - Ø7 mm,. m, 9 degrees The Danfoss plastic coupling is used to connect two ends of Danfoss flex pipes. The raw material consists of environmentally-friendly polystyrene (PE), with no admixtures. Standard/classification The products listed below meet the requirements set out in DIN EN -. Order number Type Ext. diameter Int. diameter 9F DPC- Ø Ø 9F7 DPC-7 Ø7 Ø7 9F DPC-9 Ø9 Ø9 Danfoss flex pipe is always delivered in -metre rolls. VKEWB Danfoss /9

4 Flex manifold Technical data Danfoss manifold - supply DMF-/x7 and DMF-/x7 are used in ventilation systems for both supply and exhaust. DMF- /x7 is used for smaller ventilation systems, or in systems in which the volume of air must be distributed to two or more manifolds. Can be set in concrete or mounted in the plant room. In order to facilitate cleaning, mount a DCH-x. Danfoss manifold - exhaust Order number Type H W L D Connection Weight 9F DMF-/x7 ø x ø7. kg 9F7 DMF-/x7 ø x ø7. kg 9F DMF-/x7 ø x ø7.9 kg VKEWB Danfoss /9

5 Flex ceiling/wall box Pressure loss diagram, exhaust (only for box) Pressure loss - DPV -x7 - Ø, exhaust Used in ventilation systems for supply and/or exhaust. Can be mounted on the ceiling or wall. Is equipped for the mounting of DFVS and DFVE valve types. Lindab KI, KIR, KU and KSU control valves can also be mounted in the box. All valves must be ordered separately. 7 Pressure loss - DPV -x7 - Ø, exhaust 7 Pressure loss diagram, supply (only for box) Pressure loss - DPV -x7 - Ø, supply,,, Pressure loss - DPV -x7 - Ø, supply 7 9 Order number Type H W L D Connection Weight 9F9 DPV-/7 ø xø7.7 kg 9F DPV-/7 ø xø7. kg VKEWB Danfoss /9

6 Flex floor box Pressure loss diagram Pressure loss DPGF - x/7, incl. DFG-x 7 9 Pressure loss DPGF - x/7, incl. DFG-x Used in ventilation systems for supply air. Can be set in concrete. Equipped with a telescopic collar for height adjustment. For use with grills type DFG (p. ). 7 9 Height can be adjusted - Order number Type H W L Connection Weight 9F DPGF-x/7 - x ø7. kg 9F DPGF-x/7 - x ø7.9 kg VKEWB Danfoss /9

7 Flex ceiling/wall box Pressure loss diagram, exhaust Flex inspection hatch Pressure loss - DPGW -x/7, incl. DFG-x 7 Pressure loss - DPGW - x, incl. DFG-x Used in ventilation systems for supply and/or exhaust. Can be mounted on the ceiling or wall. Equipped with a telescopic collar for height adjustment. For use with grills type DFG (p. ). 7 9 Pressure loss diagram, supply Pressure loss - DPGW -x/7, incl. DFG-x,,, The Danfoss inspection hatch can be used to access the manifold after mounting. Height can be adjusted Pressure loss - DPGW - x, incl. DFG-x Order number Type Weight 9F DCH-x.7 kg 7 9 Order number Type H W L Connection Weight 9F DPGW-x/7 - x ø7. kg 9F DPGW-x/7 - x ø7.9 kg VKEWB Danfoss /9 7

8 Flex fix Flex transfer Flex grill Flex fix is used to fasten the flexible pipes in e.g. the styropor. Can also be used to fasten the pipes in place when mounting on the wall or ceiling. Order number Type Weight 9F9 DFF-x. kg 9F DFF-x7. kg 9F DFF-x7.9 kg 9F DFF-x9. kg DFT is used when there is a need to combine Flex pipe with steel ducts. Order number Type Weight 9F DFT-7-. kg 9F DFT-9-. kg The DFG can be used for both supply and exhaust. The grill is delivered with spring clamps for mounting in box type DPGW and DPGF. Maintenance Remove the grill to access the box. Clean the outer parts with a damp cloth. Aluminium, naturally anodised Order number Type H W Weight 9F DFG-x. kg 9F DFG-x. kg Pressure loss diagram Pressure loss is indicated with box type DPGW and DPGF. VKEWB Danfoss /9

9 Flex damper Flex end cap Flex sealing ring DDG is used in places requiring air volume regulation. Must be mounted on grill type DFG. DPD is used to protect the Flex pipe as well as manifolds and boxes during mounting. PELD Standard/classification The products listed below meet the requirements set out in DIN EN -. Order number Type 9F DEC- Danfoss flex pipe / 9F DEC-7 Danfoss flex pipe 7/ 9F DEC-9 Danfoss flex pipe 9/7 9F DEC-77 Danfoss manifolds and boxes Available in packages of ten. Danfoss sealing ring, mounted on Danfoss Flex pipe to ensure an airtight seal between the pipe and manifold, box and coupler. Standard/classification The products listed below meet the requirements set out in DIN EN -. Order number 9F9 9F 9F Type DSR- DSR-7 DSR-9 Available in packages of ten. Order number Type H W L Weight 9F DDG-x kg 9F DDG-x kg VKEWB Danfoss /9 9

10 Flex supply valve Technical data Ø Number of rotations L WA [db] [l/s] [m /h] Ø Number of rotations 7 9 The DFVS supply valve has three leaf springs that allow it to be mounted directly in the DPV air box without the use of tools or other devices. Maintenance Remove the valve to access the air box. Clean the outer parts with a damp cloth. [l/s] [m /h] Plastic, RAL 9 Order number Type ød ød Weight 9F DFVS-. kg 9F DFVS- 7. kg VKEWB Danfoss /9

11 Flex exhaust valve Technical data Ø Number of rotations The DFVE exhaust valve has three leaf springs that allow it to be mounted directly in the DPV air box without the use of tools or other devices. Maintenance Remove the valve to access the air box. Clean the outer parts with a damp cloth. L WA [db] [l/s] [m /h] Ø Number of rotations L WA [db] [l/s] [m /h] Plastic, RAL 9 Order number Type ød ød Weight 9F DFVE-. kg 9F9 DFVE- 7. kg VKEWB Danfoss /9

12 For generations now, Danfoss has been delivering solutions used in all aspects of heating and cooling, such as valves, thermostats, pumps and highly advanced control systems. The Danfoss Group consists of a global network of sales companies, agents and distributors, and Danfoss products are sold, serviced and valued around the world. Danfoss products also play an important role when it comes to creating optimal indoor climate and comfort. This has always been our legacy, and the new Danfoss Air system is set to carry on this proud tradition. Danfoss A/S Ulvehavevej 7 Vejle Tel. + 7 Fax VKEWB