PUMPS, MOTORS and CONTROLS MANUFACTURING

Transcription

1 PUMPS, MOTORS and CONTROLS MANUFACTURING USEFUL AND VALUABLE PRODUCTS FOR PROGRESS, PROSPERITY AND PEACE ESTABLISHED IN 1976 water is the future Made in ITALY by VALCO SURFACE Copyright VALCO surl all rights reserved Made in ITALY by VALCO HEAD OFFICE, WORKS, PUMP & MOTOR TEST LABORATORY, PUMP & MOTOR RESEARCH CENTRE, PUMPS & WATER HANDLING UNIVERSITY VALCO surl Via dell'industria, I MAROSTICA (Vicenza) Veneto,(Venice Region)-EU-ITALY Ph.: Fax: SURFACE CLOSED COUPLED ELECTRIC PUMPS

2 water is the future J J 145 JET SELF PRIMING - Jetdom 2 Ø 9,5 138J = J = SHALLOW WELL JET SELF PRIMING SINGLE STAGE ELECTROPUMPS FOR SHALLOW WELL LIFTS DOWN TO 8m WITH PUMP BODY MADE OF CAST IRON OR OF STAINLESS STEEL 146 ø 1"BSP ø 1"BSP ø JSS J = 13, 148J = 15,5 148JSS = 9,5 148JSS Stainless Steel SHALLOW WELL JET SELF PRIMING SINGLE STAGE ELECTROPUMPS FOR SHALLOW WELL LIFTS DOWN TO 8m WITH PUMP BODY MADE OF CAST IRON or of STAINLESS STEEL Capacity in litres/minute with water with specific gravity of 1 /Dm 3 = Head in metres continuous duty max water temperature: +5 DEG (pump performance at +1 DEG C) max suction lifts: 8m at DEG C JSS - 148JTSS 138J - 138JT 148J - 148JT 148JSS STAINLESS STEEL VERSION WITH AISI 34 STAINLESS STEEL PUMP BODY cast iron versions with cast iron pump body stainless steel shaft mechanical seals high quality bearings electric motor, with Class F winding and IP54 protection, (1phase version with permanent split capacitor and with a built-in overload motor protector with automatic reset, on 3phase version the overload motor protection must be provided by the user) can draw up water in spite of presence of gas, air, or small quantities of sand. self priming pumps:pumps always ready for use! , Qm/h Ql/min 7 138J 148J 138J 138JT 148J 148JT 148JSS 148JTSS at 5 Hz 1-PHASE 23 V 3-PHASE 23/4 V 1-PHASE 23 V 3-PHASE 23/4 V 1-PHASE 23 V 3-PHASE 23/4 V 3,3 2.4/ / /2.2 Capacitor 14 Kw Hp PERFORMANCE at 29 rpm m 3 /h l/min , ,

3 water is the future CENTRIFUGAL SINGLE STAGE - Irrigua ø SINGLE STAGE CENTRIFUGAL ELECTROPUMPS FOR LOW AND MEDIUM DUTIES C 31 = 8,3 1C = 14, ø C SINGLE STAGE CENTRIFUGAL ELECTROPUMPS FOR LOW AND MEDIUM DUTIES Capacity in litres/minute with water with specific gravity of 1 /Dm 3 = Head in metres continuous duty max water temperature: +5 DEG (pump performance at +1 DEG C) max suction lifts: 4m at DEG C cast iron pump body stainless steel shaft mechanical seals high quality bearings electric motor, with Class F winding and IP54 protection, (1phase version with permanent split capacitor and with a built-in overload motor protector with automatic reset, on 3phase version the overload motor protection must be provided by the user) high quality efficient but inexpensive pumps for low and medium duties! trouble-free, compact, easy to install, inexpensive pump in cast iron C - 1CT - T Ql/min Qm/h C T 1C 1CT at 5 Hz 1-PHASE 23 V 3-PHASE 23/4 V 1-PHASE 23 V 3-PHASE 23/4 V / /2.5 Capacitor 1 Kw Hp m 3 /h l/min PERFORMANCE at 29 rpm

4 water is the future Ø 2" BSP CENTRIFUGAL HIGH CAPACITY 2 x2 SINGLE STAGE - Irrigua Ø 2" BSP HIGH CAPACITY LOW HEAD SINGLE STAGE HEAVY DUTY CAST IRON ELECTROPUMPS 2 x Ø AG6C = 21,6 HIGH CAPACITY LOW HEAD SINGLE STAGE HEAVY DUTY CAST IRON ELECTROPUMPS 2 x2 Capacity in litres/minute with water with specific gravity of 1 /Dm 3 = Head in metres continuous duty max water temperature: +5 DEG (pump performance at +1 DEG C) max suction lifts: 4m at DEG C AG6C - AGT6C cast iron pump body stainless steel shaft mechanical seals high quality bearings electric motor, with Class F winding and IP54 protection, (motor protection must be provided by the user) heavy duty construction with high efficiencies, low pressure but exceptional capacities! Ql/min Qm/h 3 48 AG6C AG6C AGT6C at 5 Hz 1-PHASE 23 V 3-PHASE 23/4 V /3. Capacitor 35 Kw Hp PERFORMANCE at 29 rpm m 3 /h l/min

5 25 PUMP BODY AND MOTOR BRACKET MADE OF BRONZE ø 1 GAS SIDE SUCTION 45 1 water is the future TURBINE PERIPHERAL - Casalinga 85 ø PL BRONZE TURBINE PERIPHERAL ELECTROPUMPS WITH PUMP BODY AND MOTOR BRACKET MADE OF CAST IRON OR OF BRONZE ø 1" GAS Ø END SUCTION PL = 6,15 255PL = 5,33 = 9,95 19 BRONZE BRONZE TURBINE PERIPHERAL ELECTROPUMPS WITH PUMP BODY AND MOTOR BRACKET MADE OF CAST IRON OR OF BRONZE Capacity in litres/minute with water with specific gravity of 1 /Dm 3 = Head in metres continuous duty max water temperature: +5 DEG;for type 254PLHA-E-B +9 DEG C,(pump performance at +1 DEG C) max suction lifts: 4m at DEG C BRONZE VERSION WITH PUMP BODY AND MOTOR BRACKET MADE OF BRONZE cast iron versions with pump body and motor bracket made of cast iron stainless steel shaft mechanical seals high quality bearings electric motor, with Class F winding and IP54 protection, (1phase version with permanent split capacitor and with a built-in overload motor protector with automatic reset, on 3phase version the overload motor protection must be provided by the user) generating high lifts with small power consumption: trouble-free, compact, easy to install, inexpensive pump in cast iron or in bronze! T / 254PLT-HA-E-B 255PL - 255PLT Ql/min Qm/h PL 254PLT-HA-E-B 255PL 255PLT T Capacitor at 5 Hz 1-PHASE 23 V 3-PHASE 23/4 V / PHASE 23 V PHASE 23/4 V 2 / PHASE 23 V PHASE 23/4 V 4.3 / 2.5 Kw Hp m 3 /h l/min. PERFORMANCE at 29 rpm

6 PUMPS, MOTORS & CONTROLS USEFUL PRODUCTS FOR PROGRESS, PROSPERITY AND PEACE Made in ITALY by VALCO SURFACE CLOSED COUPLED ELECTRIC PUMPS VALCO SURFACE CENTRIFUGAL CLOSE COUPLED ELECTROPUMPS PUMPS IN CAST IRON, STAINLESS STEEL, BRONZE AND PLASTIC MATERIALS are manufactured in VALCO's efficient manufacturing facilities: a range of 5 types of SURFACE centrifugal close coupled pumps available in all materials to suit customers application. CONVA, JETDOM, IRRIGUA, CASALINGA are pumps developed with capabilities of self priming, deep well or shallow well operation. VALCO offers a complete range of pumps for all applications with modern high quality designs. VALCO ensures: high quality and high technology with competitive prices the best servicing a global strategy for the promptest delivery of spare parts in a competitive manner reduction of your purchasing and transport costs constant research by our PUMP & MOTOR RESEARCH CENTRE in the development of new and more advanced products.the Research and Development of pumping sets for customers individual requirements are carried out by the Special Pumps Division pumps simple to and cost effective to maintain with design for long life. Specialised engineers use their expertise for all customers to ensure the high quality expectations are met in full. The Technical Project Design and Engineering department is integrated into the business unit with modern advanced testing facilities. The result of ten years investment in innovative products and design have resulted in high customer service and product quality. ALSO AVAILABLE FOLLOWING PRODUCTS OF OUR MANUFACTURE: SUBMERSIBLE borehole pumps in the VERA range to NEMA standard for wells from three to twelve inch sizes REPLACEABLE DIAPHRAGM MEMBRANE TANK-VESSELS ASSOCIATED FITTINGS FOR PUMPS TO ENSURE FAST INSTALLATION AND COMPLETE SUCCESS. Float level switches, electric and electronic level regulators, gauges, hoses and control equipment are all included in the wide range of accessories. COMPACT AC POWER ELECTRIC MOTORS IN STANDARD OR CUSTOM DESIGNS. Totally enclosed fan ventilated ranges for industrial applications. VALCO: THE MOST COMPLETE RANGE OF PUMPS FOR DOMESTIC, AGRICULTURAL AND INDUSTRIAL USE AND A RELIABLE SOURCE OF PUMP AND MOTOR SERVICE! VALCO = HIGH QUALITY AND COMPETITIVE PRICES Consult VALCO for all your pumping and motor requirements VALCO surl Via dell'industria, I MAROSTICA (Vicenza) Veneto - EU - ITALY HEAD OFFICE, WORKS, PUMP & MOTOR TEST LABORATORY, PUMP & MOTOR RESEARCH CENTRE, PUMPS & WATER HANDLING UNIVERSITY Ph.: Fax: valco@valco-costenaro.com Trademarks VALCO, CONVA, JETDOM, IRRIGUA, CASALINGA, VERA are registered trademarks of VALCO surl; trademark is a registered trademark of Valerio Costenaro and VALCO surl is authorized to use it. The features and specifications herein stated are in no way binding for the manufacturer.the company's policy is one of continuous improvement of its products and therefore the right is reserved to supply products which may differ slightly from those illustrated and described in this pubblication and we reserve the right to alter specifications or prices at any time without prior notice. Dimensions in mm. Reduction in speed will result in a fall of performance. Faoria de ponpe, maneghe, tronbe e mati e muturi a eletrizàr. Reproductions even partial not permitted.