Dimensions - Z Sections. Dimensions - C Sections
|
|
- Thomas Daniel
- 5 years ago
- Views:
Transcription
1 t R5 1
2 Steeline Dimensions - C Sections PURINS & GIRTS Dimensions - Z Sections Purlin Section Thickness BMT Section Mass kg/m C C C C C C C C C C C C C C C Purlin Section 1 Thickness BMT Section Mass kg/m Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z C S R5 R5 shear centre centroid t t 1 Quick Selection Purlin Chart for Carports and Garages () - One (1) row of Bridging (10,000 height) Section ind Speed 33m/sec ind Speed 41m/sec ind Speed 50m/sec C C C C C C C C C C C C C NOTE: These tables to be used as a guide only. Independant engineering is required for purlins and girts and is not available in this brochure.
3 Steeline SAE ROO PURIN SPANS Galvaspan G450 - Z350 Terrain Category 3 Roof Structure 0.1 kn/m Pressure Coefficient -0.9 One (1) Row of Bridging Cleated or bracketed fixing only (No Bolting) Results are for a minimum of two spans Maximum 10.0m above General evel Terrain All Purlin Structure
4 Steeline PURINS & GIRTS Dimensions in 22 Nominal Section 60 Size () G () D D G VIC only Other states Standard elongated punched hole. Holes equally spaced above and below centre line Butt Joint ap varies according to span and section size Broad Narrow our Bolt Cleat Narrow 2 Bolt Cleat Rafter or steel frame Broad Bolt in web and flange at end of lap Rafter or steel frame PURINS ACCESSORIES Purlin Bolts M12 Size PB1230 standard purlin bolt (grade 4.6): M12x30 with nut ascia Bolts PB1230 fascia bolt (grade 4.6): M12x30 with nut Purlin Bolts M12 Size PB1230 standard purlin bolt (grade 4.6): M16x45 with nut Adaptor Bracket (4 bolts) General Purpose Bracket 6 holes: 18 diam Cat. NO A B C D E GPB GPB GPB GPB Clamp Plate Cat. NO A AC AC AC AC Angle Connector Cat. NO A AC AC AC AC General Purpose Bracket A Clamp Plate Angle Connector 70 A B C D E A
5 Steeline BRIDGING CONIGURATIONS INISHER Adjustable ascia Bridging Bolt/ock Bolted Starter Bolt/ocator Bolted Ridge Strut Bolt/Bolt Direction ascia Girt Hanger Intermediate Bridging ocator/ock OPTIONA RIDGE TIES Adjustable ocator/ocator Direction of ay Intermediate ock/ocator Turnbuckle Ridge Tie Adjustable Girt oot Sag Rod Ridge Tie Intermediate Bridging Place locator end through purlin holes as per Diagram 1. Snap the next piece of bridging into place by pushing the lock into the locator. Diagram 1 Diagram 2
6 Order orm SNAP TPE BRIDGING GEEONG 75 Heales Road Corio 3214 acsimile AVERTON 11 estside Drive averton North 3026 acsimile Client Job Project Sheet of DRN CH D Date HAVE OU DEDUCTED 2 ROM CEAT CENTRES? es No Bolted Starter (BOT/OCATOR) 003 Intermediate (OCK/OCATOR) 001 Bolted inisher (BOT/OCK) 004 ength Mark Centre ength Mark Centre ength Mark Centre Adjustable Starter (BOT/OCATOR) Apex Ridge Strut (BOT/BOT) Adjustable inisher (BOT/OCK) ength Mark Centre Set Angle ength Mark Centre Set Angle ength Mark Centre Set Angle
7 Order orm PURIN GEEONG 75 Heales Road Corio 3214 acsimile AVERTON 11 estside Drive averton North 3026 acsimile Client Date / / Sheet Project By Other Checked Holes Options inish Delivery Date Sales Docket Z/C Broad PART ENGTH O Broad PART ENGTH O Broad PART ENGTH O Broad PART ENGTH O
8 10 x x 25 HE HD TEKS HE HD TPE x x 40 HE HD TEKS HE HD TPE x x 50 HE HD TEKS HE HD TPE x x 65 A HD TEKS HE HD TPE 17 M6 11 x 50 ROO ZIP 10 x 30 RIPPE TEKS hilst every care is taken in the preparation of these specifications, Steeline JH Stephenson Pty td accept no responsibility for the accuracy of the information supplied. JH STEPHENSON & SON PT TD ABN GEEONG 75 Heales Road Corio 3214 Telephone AVERTON 11 estside Drive averton North 3026 Telephone
BUILDING PRODUCTS LCP PURLINS & GIRTS. Purlin and Girt Structural System. BC 1:2012 FPC Cert. No. ABS-BCI-SG-0001
BUILDING PRODUCTS LCP PURLINS & GIRTS Purlin and Girt Structural System BC 1:2012 FPC Cert. No. ABS-BCI-SG-0001 CERT NO. FM 59595 BS EN ISO 9001 : 2008 FEATURES Cold formed purlins and girts are recognised
More informationPurlins & Girts. LYSAGHT Purlins & Girts User s Manual
urlins & Girts LYSAGHT urlins & Girts User s Manual Rainwater Solutions Roofing & Walling Solutions Fencing Solutions Home Improvements House Framing Solutions Customer Support 1 Using Lysaght Zeds & Cees
More informationStructural Sections. Page 15
Page 15 MILD STEEL CHANNELS Product Shortname: CH AS 3679-300 AS 3679-350 (on indent only) BS4360-43A Mass per Metre = area of section x 0.00785 = kg/m Metres per Tonne = 1000 = metres kg/m Size (A x B)
More informationMEGASPAN PURLINS & GIRTS
MEGASPAN PURINS & GIRTS A Met-TECH GUIDE DESIGN MANUA & CAPACITY TABES NOVEMB 2018 R R R R G NR R R R R R G NR NR R N R G O G G O N G G G N O G O N TR TR T R TR TR TN N TR TR TN N R TR TR T S N N O TR
More informationZeds & Cees Purlins. Users Guide. Purlins & girts structural sections
Zeds & Cees urlins urlins & girts structural sections Users Guide Used in commercial and domestic applications Economical, lightweight alternative to timber purlins & girts Quick and easy to install using
More informationSTRAMIT PURLINS, GIRTS & BRIDGING
STRAMIT PURLINS, GIRTS & BRIDGING p r o d u c t t e c h n i c a l m a n u a l PGB TAB STRAMIT PURLINS, GIRTS & BRIDGING Comprehensive guide to selecting and specifying Stramit Purlins, Girts and Bridging.
More informationTechnical. Supplement. Stramit Purlin & Girt BRIDGING DETAILING GUIDE
Technical Supplement Stramit Purlin & Girt BRIDGING DETAILING GUIDE This guide is intended to give specific details on Stramit systems to structural detailers. For more comprehensive information refer
More informationROOFING SOLUTIONS DESIGN GUIDE PURLINS AND GIRTS DESIGN GUIDE PURLINS AND GIRTS S&T029N
DESIGN GUIDE PURLINS AND GIRTS ROOFING SOLUTIONS DESIGN GUIDE PURLINS AND GIRTS S&T029N JUL 2015 CONTENTS INTRODUCTION 2 Acknowledgements 2 Disclaimer 2 Product Technical Statement 3 Producer Statement
More informationPurlins and Girts. A division of Canam Group
Purlins and Girts A division of Canam Group TABLE OF CONTENTS OUR SOLUTIONS AND SERVICES............................................................ 5 Cautionary statement..................................................................
More informationStructural. Guide. Inside this
August 2013 Inside this Structural Guide Welcome to the Structural Guide 5 Introduction 6 Producer Information 7 Design Considerations 9 MSS & MC Design & Selection 10 MSS Purlins 13 Product Innovation
More informationQuick Selection Guide
topspan Quick Selection Guide 1 LYSAGHT topspan LYSAGHT topspan 2 Introduction In response to industry needs, Lysaght has developed a range of selection tables for the Lysaght range of TOPSPAN profiles.
More informationArray Frame Engineering Certificate
Gamcorp (Melbourne) Pty Ltd A.C.N 141 076 904 A.B.N 73 015 060 240 www.gamcorp.com.au melbourne@gamcorp.com.au Suite 4, 346 Ferntree Gully Rd, Notting Hill VIC 3149. Tel: 03 9543 2211 Fax: 03 9543 4046
More information01 CONTENTS. e-beam. e-beam. Technical Information 03
B 1 01 CONTENTS 02 e-beam Technical Information 03 11 e-beam Strutting Beams 12 Strutting Counter Beams 14 Strutting Hanging Beams 16 Counter Beams 18 Roof Beams 20 ENGINEERED TO LOAD ENGINEERED TO LENGTH
More informationSpan guide for residential framing. September Fully supported by
Span guide for residential framing September 2011 Fully supported by Engineered to perform Structural LVL is engineered for reliable performance and is available in two complementary ranges. and + are
More informationStrutting Beams Supporting Underpurlins Only
Strutting Beams Supporting Underpurlins Only fan struts strutting beam roof area supported by strutting beam = L/2 x B/2 block underpurlin strutting beam strut L = total rafter span strutting beam span
More informationJD3 rated for greater connection strength. makes it easy to spot in the warehouse or on site
JD3 rated for greater connection strength H2S termite treated Distinctive blue colour makes it easy to spot in the warehouse or on site Made in Australia Wesbeam Span Tables Roof Members Rafters 4 Roof
More informationAPPENDIX D. D.1 Macalloy Bars. Approximate safe working loads (kn) Appendix D - Proprietary Components (1/9) Stainless steel architectural ties
Appendix D - Proprietary Components (1/9) APPENDIX D D.1 Macalloy Bars Bar dia. mm Stressing ties Stainless steel stressing ties Stainless steel architectural ties High strength Tie rods grades precision
More informationInstallation InstructionS RB 500 Manual Roller Shades Heavy Duty Clutch Coupled Fascia Series-Coupled Unit...
Installation InstructionS RB 500 Manual Roller Shades Heavy Duty Clutch Coupled Fascia 5-37 Series-Coupled Unit... Installation b a c Install the clutch bracket and intermediate bracket first. a) recess
More informationThis technical bulletin aims to supplement the information relating to holes in the web of James Jones I- Joists given in the Technical Manual.
Holes in the Web of JJI-Joists Sheet 1 of 9 Introduction This technical bulletin aims to supplement the information relating to holes in the web of James Jones I- Joists given in the Technical Manual.
More informationHORIZONTAL SYSTEMS SOME SAY WE OVER-ENGINEER LIFELINES. WE SAY YOU CAN T OVER-DO SAFETY.
SOME SAY WE OVER-ENGINEER LIFELINES. WE SAY YOU CAN T OVER-DO SAFETY. 90 You can always depend on our horizontal safety systems for mobility and fall protection when working at height. That s why safety
More informationMSS PURLINS BRACING MC PURLINS MS TOPHATS MSS SINGLE SPAN FLOOR JOISTS. Version April 2016
MSS PURLINS BRACING MC PURLINS MS TOPHATS MSS SINGLE FLOOR JOISTS Version April 2016 CONTENT WHO WE ARE 5 INTRODUCTION 6 PRODUCER INFORMATION 7 DESIGN CONSIDERATIONS 9 MSS & MC DESIGN & SELECTION 10 MSS
More informationDESIGN TABLE OF PURLIN, GIRT, EAVE BEAM, TIE RUNNER
DESIGN TABLE OF PURLIN, GIRT, EAVE BEAM, TIE RUNNER RECOMMENDED RHS/SHS FOR GIRT TRUSS WIND SPEED WIND SPEED WIND SPEED WIND SPEED WIND SPEED WIND SPEED REMARK SPACING(m) 33 m/s 39 m/s 44 m/s 47 m/s 50
More informationMeypine. Handy Span Guide
Handy Span Guide and are H3 preservative treated pre-primed timbers manufactured from sustainably grown plantation softwoods. They are available in both structural and nonstructural sections, with this
More informationBRACING STRUT SYSTEMS SECTION 4
BRACING STRUT SYSTEMS SECTION 4 01942 402 704 www.mgf.ltd.uk MGF 200 Series Strut 4.1 MGF 300 Series Strut 4.2 MGF 400 Series Strut 4.3 MGF 600 Series Strut 4.4 MGF 1000 Series Strut 4.5 MGF Bracing Strut
More informationMGF TECHNICAL FILE MGF 600 SERIES STRUT. Description. Product Notes.
Description Simple to assemble, heavy duty, modular bracing strut systems designed primarily to be used as cross struts with the MGF 305/406 UC hydraulic bracing system on major excavations. The system
More informationPremium Structural Engineered Wood Products. Technical Data for. LVL Flange and MSR Flange I-Joists
Premium Structural Engineered Wood Products Premium Structural Engineered Wood Products I- USER S guide Technical Data for LVL Flange and MSR Flange I-s THE structural Wood Supplier Wood A renewable building
More informationSummary. Project data. Site data. A. Mulder Construction cc Anton Mulder Birdie Kuilsrivier. Turnberry Village
Summary Project data Project number Commission Street Post code / city Turnberry Village Stellenbosch 6/28/2017 Company Customer Street Post code / city Phone Mobile E-mail A. Mulder Construction cc Anton
More informationClassic roof Formulae Guide V4 l March 2016
Classicroof ormulae Guide V4 l March 2016 CONTENTS TRIGONOMETRY... PAGE 2 EXAMPLE: BASIC... PAGE 3 EXAMPLE: PYTHAGORAS THEOREM... PAGE 4 IND DIMENSION X... PAGE 5 HOW TO CALCULATE: INTRODUCTION... PAGE
More informationEurocode Compliant. supplement. groundworks technical reference section 4: double acting hydraulic braces. supershaft plus technical details
groundworks technical reference section 4 : double acting hydraulic braces supplement supershaft plus technical details Page 1 Eurocode Compliant Issue 1 supershaft plus (SSP) 1. Introduction Supershaft
More informationSeries 2, 3, 4, & 5 Steel - Accessories
- ccessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. Boxed in pairs Expansion Splice Plates Expansion plates allow
More informationPRODUCTS FOR PV SOLAR MOUNTING APPLICATIONS ROOF MOUNT SYSTEMS...3. GROUND and pole MOUNT SYSTEMS...5. L Feet...9. Corrugated/IBR Roof Mounts...
S 1 Index PRODUCTS FOR PV SOLAR MOUNTING APPLICATIONS ROOF MOUNT SYSTEMS...3 GROUND and pole MOUNT SYSTEMS...5 Power Rail Module Mounting System...6 Power Rail Extrusions...7 Power Rail Commercial Extrusions...7
More informationNEW RESIDENCE - Sample Takeoff UpState Estimating / Material Takeoff
NEW RESIDENCE - Sample Takeoff UpState Estimating / www.upstateestimating.com Material Takeoff _NOTES Floor System By Others Roof System-Stick Built... Verify Header/Beam Sizes... Verify Ridge-Hip-Valley
More informationSafety Edge HSC HSC T. Technical data. Intended use. Function
HSC 65-35-01 T 12 Intended use 35 39 ±2 65 +4 All dimensions in mm Safety Edges are used for protecting against risks at Enclosure sealing: shearing and crushing edges, for instance at machine guards,
More informationTechnical Data Sheet. British Standards Compliant. TECHNICAL DATA SHEET System 160 (British Standards)
Technical Data Sheet British Standards Compliant Mass 10 System 160 Mass 25 Mass 50 MAT 75 / 125 Superprop Hydraulics Quickbridge MU Falsework MU Bridging Compact Bridging BarrierGuard 800 Instrumentation
More informationLINTELS WITH TG. Single Spans. Lintels Supporting Truncated Girder Truss INCLUDES TG Set Back 2.4m Maximum 40 kg/m 2 90 kg/m 2
63 Single Spans INCLUDES TG Set Back 2.4m Maximum 40 kg/m 2 90 kg/m 2 TG Set Back 3.6m Maximum 40 kg/m 2 90 kg/m 2 Restraint value for slenderness calculations is 600 mm. K6 factor of 1.0 used. K23 factor
More informationSeries 2, 3, 4, & 5 Aluminum - Accessories
Wedge Lock Splice Plates Standard 4-hole pattern. Furnished in pairs, with hardware. One pair including hardware provided with each section. Boxed in pairs with hardware. For field installation drill 13
More informationOWECON OWL500 Roller Load Cell Series
OWECON OWL500 Roller Load Cell Series The OWECON Roller Load cell has two dual beams placed in each end of the roller and is designed to mount between the two machine sides. The dual load cell beam design
More informationGP Lam LVL. Grade Thickness Depth , , , , , 149, 169, 189, 249 (209and 229 by special order) 2.
GP Lam LVL Grade Thickness Depth 2.0E 1 3 49, 3 1 29 7 1 49, 9 1 49, 9 1 29, 11 1 49, 11 7 89, 149, 169, 189, 249 (209and 229 by special order) 1.5E 1 3 49 7 1 49, 9 1 49, 9 1 29, 11 1 49, 11 7 89, 149,
More informationGP Lam LVL. Grade Thickness Depth , 9 1 4, 9 1 2, , , 14, 16, 18, 24 (20 and 22 by special order) 2.
GP Lam LVL GP Lam LVL Introduction.....................32 Bearing Details...................34 Handling and Installation..........35 Floor Beams.....................35 Window, Patio Door and Garage Door
More informationInstallation instructions, accessories - Rear Seat Entertainment
XC90 Section Group Weight(Kg/Pounds) Year Month 3 39 2004 10 XC90 2003, XC90 2004, XC90 2005, XC90 2006, XC90 2007, XC90 2008 Replaces issue: 2003 12 J3904620 Page 1 of 18 Required tools A0000162 A0000163
More informationLysaght Klip-lok 406. Superior waterproofing performance from a concealed-fixed cladding
Lysaght Klip-lok 406 Superior waterproofing performance from a concealed-fixed cladding Strong, durable, versatile, long spanning, concealed-fix roof and wall cladding with exceptional waterproofing characteristics.
More informationFabricated from grade S x400 steel box section the extensions are quickly assembled into the required
Description Highly versatile, simple to assemble, heavy duty, modular bracing strut system designed primarily to be used as intermediate struts with MGF hydraulic bracing systems. The system can also be
More informationRefresh Roof Composite Panel Existing with Trapezoidal Outer Sheet
COVERWIDTH 1000 www.euroclad.com Refresh Roof Composite Panel Existing with Trapezoidal Outer Sheet Bracket Height Continuous Tophat Height Insulation Thickness* Insulation Value U Value at 1.5M Centres
More informationMultideck 80-V2 Features and Applications
Features and Applications is designed to incorporate all the advantages of the Multideck 60-V2 but in a deeper profile to provide longer spans up to 5.4m unpropped. Concrete Volume Savings Due to its unique
More informationFlat-roof system Windsafe
Flat-roof system Windsafe Modular systems optimized for superimposed loads CONTENTS PAGE 1 General information 2 2 Planning 2 3 Article overview 3 4 Mounting of supports 6 5 Exploded view 7 6 Tolerances
More informationSHELVING PRODUCTS. Maximize Your Storage Space
SHELVING PRODUCTS Maximize Your Storage Space SHELVING UNITS Pre-engineered sections are 36, 42, and 48 wide and 84, 96 and 120 high, with shelves adjustable on 1-1/2 centers. For double row, back-to-back
More informationEDGE METAL & ACCESSORIES FOR SINGLE-PLY ROOFING SYSTEMS
EDGE METAL & ACCESSORIES FOR SINGLE-PLY ROOFING SYSTEMS OUR PROMISE THROUGH ONGOING INTERCHANGE OF EXPERIENCES WITH CONTRACTORS, MULE-HIDE KEEPS ON TOP OF THE LATEST ROOFING REQUIREMENTS AND SOLUTIONS
More informationgroundworks technical reference section 4 : double acting hydraulic braces supplement supershaft plus technical details
groundworks technical reference section 4 : double acting hydraulic braces supplement supershaft plus technical details Issue 4 January 2016 Supershaft Plus is a modular hydraulic system. outer sleeve
More informationSeries 3 & 4 Stainless Steel - Accessories
- Accessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. (Expansion splice quantity subtracted) Boxed in pairs with hardware.
More informationNOVALINE FASCIA SYSTEM INSTALLATION GUIDE
NOVALINE FASCIA SYSTEM INSTALLATION GUIDE LYSAGHT NOVALINE FASCIA SYSTEM NOVALINE fascia system is compatible with most of our popular LYSAGHT gutters, including QUAD 115 & 150 Hi-Front & Lo-Front and
More informationReference Data. Schedule 40 Steel Pipe Data. Schedule 80 Steel Pipe Data
Schedule 40 Steel Pipe Data Maximum Recommended Pipe Size Pipe O.D. Thickness Weight of Pipe Filled With Water Span* Hanger Rod Ft. Meter Sizes 3/8" (10).675 (17.1).091 (2.3).6 (.9).7 (1.0) 7 (2.13) 3/8"-16
More informationGRATE-LOCK PRODUCT SPECIFICATIONS. GRATE-LOCK Plank with Grip or Smooth Surface. 1-1/2", 2-1/2", 3" (4" special order)
QUALITY HOLE PRODUCTS PLANK GRATING McNICHOLS Quality Plank Grating includes a variety of channel configuration choices and walkway styles. Plank Grating is a one-piece construction product that is lightweight
More informationCut to Size Plastics Pty Ltd
Cut Hercules to Size Engineering Plastics Australia Pty Ltd incorporating Incorporated by Hercules Cut to Engineering Size Plastics Pty Australia Ltd 2016 - VERSION C Cut ABN To 73 Size 001 909 Plastics
More informationESR-1414 Reissued July 2014 This report is subject to renewal October 1, 2015.
ICC-ES Evaluation Report www.icc-es.org (00) 23-6 (62) 699-03 ESR-11 Reissued July 201 This report is subject to renewal October 1, 201. A Subsidiary of the International Code Council DIVISION: 0 00 00
More informationCONTACT INFORMATION. Charleston, WV Location. 901 Brooks Street Charleston, WV Telephone: (304)
CONTACT INFORMATION Poca, WV Location (River Plant) 300 Wright Glass Addition Road PO Box 1029 Poca, WV 25159 Telephone: (304) 755-5638 Sales Fax: (304) 755-8611 Accounting Fax: (304) 755-8589 Charleston,
More informationSeries 2, 3, 4, & 5 Aluminum - Accessories
The following is a list of accessories and fittings that can be provided with S8 tray. For more information on these items, contact our Engineering Department. Fittings Horizontal Bends 30 Bends with 24,
More informationMORRISON MS-40C MATERIAL SPREADER
INSTRUCTION MANUAL & PARTS BOOK MORRISON MS-40C MATERIAL SPREADER POWERFUL - EFFICIENT - DEPENDABLE 25 INDUSTRIAL DRIVE, KEYPORT, NEW JERSEY, USA, 07735, 732-566-5400 FAX 732-5444 Doc. # OI M09203 PB M09203
More informationPRECAST CONCRETE SPECIALISTS. Product Catalogue
PRECAST CONCRETE SPECIALISTS Product Catalogue Roodepoort Pipe s manufacturing and storage facility. HEAD OFFICE, P O Box 92, Roodepoort 1725, Tel: (011) 670-7600, Fax: (011) 472-5754 E-mail: info@rocla.co.za
More informationElectrical and Mechanical Supports Systems
Electrical and Mechanical Supports Systems Index - Mechanical & Electrical Support Systems This catalogue contains Mechanical & Electrical Support Systems information only as indicated below. For any additional
More informationSeries 2, 3, 4 Steel Cable Ladder Steel Cable Ladder, Series 2, 3, 4 & 5
Cable Ladder with Slotted Rung (shown with alternating slot orientation) Cable Ladder with Slotted Rung (shown with continuous slot down - also available with continuous slot up) HDS-1 Steel Cable Ladder,
More informationTechnical Data 404D-22
Technical Data 404D-22 IOPU Basic technical data Number of cylinders..................................................... 4 Cylinder arrangement....................................verticle in line Cycle............................................................
More informationGP Lam LVL. (20!and 22! by special order) 13 4! 31 2! 1.5E. Lengths: up to 60 feet. Referenced dimensions are nominal and used for design purposes.
GP Lam LVL Grade 2.0E 1.5E Thickness Depth 13 4!, 31 2! 7 4!, 9 4!, 9 2!, 11 4!, 117 8!, 14!, 16!, 18!, 24! (20!and 22! by special order) 13 4! 7 1 4!, 9 1 4!, 9 1 2!, 111 4!, 117 8!, 14!, 16! 31 2! 45
More informationINDEX OF W.T.I. BEAMS
INDEX OF W.T.I. BEAMS Contents Beam Type Page General Specification 3-7 Roof Construction Mass 8-9 Engineers Certification 10 Rafters Roof Load of Light Sheet (10kg/m2) 13 Single & Continuous Span Roof
More informationLight gage steel framing
Missouri University of Science and Technology Scholars' Mine Center for Cold-Formed Steel Structures Library Wei-Wen Yu Center for Cold-Formed Steel Structures 1-1-2001 Light gage steel framing Dale Industries
More informationTalk to us. We ve got it! Tubecon Africa (PTY) LTD Reg. No. 1977/001592/07. Head Office: Cape Town: Durban: Tel Tel.
Talk to us. We ve got it! Tubecon Africa (PTY) LTD Reg. No. 1977/001592/07 Head Office: Cape Town: Durban: Piet Rautenbach Steet Tel. +27 12 541-3211 Tel. +27 21 949-0658 Tel. +27 31 701-6078 P.O. Box
More informationProfile series I-40. System kit Profile series I-40
Profile series I-40 System kit Profile series I-40 n n n a n n n R n a R 45 Profile series I-40 Contents 1 Technical data/profile machining F f Page 1 2 Page 1 3 Page 1 5 Page 1 8 Profiles Page 2 2 3000
More informationPAII Planetary Series Economy Range Steel
PAII Planetary Series Economy steel version of precision AB range Second generation PA Steel & aluminium construction Square B5 style output flange 5 frame sizes from 042 up to 142 17 reduction ratios
More informationFischerPANEEL. * An enterprise of Tata Steel
5 30 50 00 FischerPANEEL * An enterprise of Tata Steel FischerPANEEL Economical with versatile design possibilities FischerPANEELE are functional building elements for industrial, office and administrative
More informationBRACING STRUT SYSTEMS SECTION 4
BRACING STRUT SYSTEMS SECTION 4 0808 1153 122 design@mgf.ltd.uk mgf.ltd.uk MGF 200 Series Strut 4.1 MGF 300 Series Strut 4.2 MGF 400 Series Strut 4.3 MGF 600 Series Strut 4.4 MGF 1000 Series Strut 4.5
More informationLAND MAINTENANCE REPAIR PARTS MANUAL BUSH HOG MODEL: 307 SECTION: 16
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER, 0
More informationmini orb w.a. design and installation guide
mini orb w.a. design and installation guide lysaght mini orb W.A. 6mm 807mm cover mini orb W.A. is a corrugated sheet with reduced height of corrugation to the more traditional custom orb profile. It is
More informationCATALOGUE PIPE SUPPORTS
CTOGUE B R T IN SIN C E 1 9 2 4 G 90 YERS ST E RU CE T PIPE SUPPORTS O F PIPE SUPPORTS - PICTORI INEX PIPE SUPPORTS The Unistrut pipe support systems covers an extensive range of hangers, pipe clips, pipe
More informationTWO POST 4 TONNE CLEAR FLOOR HOIST
Makers of the famous TWO-POST AND FOUR-POST HOISTS & ACCESSORIES MOLNAR ENGINEERING PTY. LTD. TWO POST 4 TONNE CLEAR FLOOR HOIST MODEL 2P4T PREMIUM SERIES 3 PARTS IDENTIFICATION MANUAL Contents Home Page...
More informationConnectors catalog 6/22/09 3:17 PM Page 1 CONNECTORS PRODUCT INFORMATION CONNECTOR PLATES TRUSS BRACING & RESTRAINING PRODUCTS.
Connectors catalog 6/22/09 3:17 PM Page 1 CONNECTORS PRODUCT INFORMATION CONNECTOR PLATES TRUSS BRACING & RESTRAINING PRODUCTS www.mii.com TM Connectors catalog 6/22/09 3:17 PM Page 2 MITEK QUALITY & SERVICE
More informationWESTERN SPECIFIER. Technical Data for PWI Joists, PWLVL Headers, Beams, Rim Board, Stud, and Dimension
E N G I N E E R E D W O O D WESTERN SPECIFIER Technical Data for PWI Joists, PWLVL Headers, Beams, Rim Board, Stud, and Dimension P R O D U C T S JOIST DIMENSIONS 9½ LVL FLANGE PWI JOIST SERIES JOIST DIMENSIONS
More informationS305/S320 S325/S340 S365/S390
S305/S320 S325/S340 S365/S390 Mobile Scrap and Demolition Shears S320 312B L Reach Boom Mounted * Must be operated with Dozer blade and stabilizer down or two sets or stabilizers down. S325 318B L 320B
More informationLEVELe ELEVATOR INTERIORS WITH LIGHTPLANE INSTALLATION INSTRUCTIONS. STANDARD LEVELe COMPONENTS CEILING COMPONENTS LIGHTPLANE COMPONENTS TOOLS NEEDED
TOOLS NEEDED SUCTION CUP(S) IMPACT DRILL CRESCENT WRENCH #8-18 SQUARE / PHILIPS COMBO DRIVE BIT SQUARE MASKING TAPE PENCIL DRILL BIT EXTENDER 3/8" DRILL BIT TAPE MEASURE CENTER PUNCH LEVEL BRUSH INCLUDED
More informationESR-1414 Reissued October 1, 2011 This report is subject to renewal in one year.
ICC-ES Evaluation Report www.icc-es.org (00) 23-657 (562) 699-053 ESR-11 Reissued October 1, 2011 This report is subject to renewal in one year. A Subsidiary of the International Code Council DIVISION:
More informationGuangzhou Stadium Project TRADITIONAL
ject Pro um i d a t ou S ngzh Gua Traditional Danpalon Multicell provides exceptional quality of light, a rich non-industrial visual appeal and delivers superior durability, thermal insulation and 99.9%
More informationStandard Range Sheds / Workshops SPECIFICATION
Standard Range Sheds / Workshops SPECIFICATION Ex. 16 x 125 Tanalised rebated shiplap boarding for the external cladding (finish thickness 13mm) 11mm OSB 3 (moisture resistant) boards on the roof and floor
More informationRAFTERS. Single and Continuous Spans
7 Single and Continuous Spans Restraint value for slenderness calculations is 1200 mm, in 10, 20, 40( kg/m 2 ) (Restraint may be by Roof Battens) Restraint value for slenderness calculations is 600 mm,
More informationFORESTRY. For Use in Log-Loading, Road Building and Harvester Processing Applications. Engine. Cab and Controls. Undercarriage
FORESTRY For Use in Log-Loading, Road Building and Harvester Processing Applications Engine Isuzu AI-4HK1X Tier 3 turbocharged diesel engine with electronic fuel control, 4-cylinder, water-cooled, EGR
More informationGeneral Purpose Motion Control Couplings
General Purpose Motion Control s Sliding Disc (Oldham) Universal ateral (Uni-at) Backlash-free up to 10 8 turns Can tolerate large misalignments Slight damping characteristics Flex-free mechanical action
More informationES44-LED SERIES DIRECT OR INDIRECT HIGH EFFICIENCY LED - RECESSED, SURFACE, WALL OR SUSPENDED
ES44-LED SERIES DIRECT OR INDIRECT HIGH EFFICIENCY LED - RECESSED, SURFACE, WALL OR SUSPENDED PERFORMANCE CHARACTERISTICS Optical Efficiency: 90.5% max Lumens per watt: 180 max Lumen output: 2200Lm/ft
More informationTechnical Data Sheets
RMD Kwikform Technical Data Sheets Imperial Specification Head Technical Office Brickyard Road, Aldridge, Walsall WS9 8BW, UK. Telephone: +44 1922 743743 Facsimile: +44 1922 743400 Email: info@rmdkwikform.com
More informationCERTIFIED QUALITY SYSTEM ISO 9001:2015 REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRAY ALUMINIUM CABLE LADDER CABLE TRUNKING PRODUCT CATALOGUE Electrical Cable Containment REGISTERED COMPANY Mechanical Support
More informationHi-Tech specially designed components allow for fast and easy assembly.
OPEN SHELVING MEDIUM, HEAVY AND EXTRA HEAVY-DUTY HI-TECH STEEL SHELVING Open Starter Units Include: Two beaded front posts, two angle back posts, one pair of back sway braces, two pair of side sway braces
More informationSheet Metal Connectors, Inc Main Street N.E. Minneapolis, Minnesota
Sheet Metal Connectors, Inc. 5850 Main Street N.E. Minneapolis, Minnesota 55432-5439 Sheet Metal Connectors, Inc. www.smcduct.com SPECIFICATIONS FOR SPIRAL PIPE AND FITTINGS MINNEAPOLIS, MN 5850 Main Street
More informationFeasibility of Ultra Long-Span Suspension Bridges Made of All Plastics
IASE SYMPOSIUM MELOURNE 1 Feasibility of Ultra Long-Span Suspension ridges Made of All Plastics Ken-ichi MAEDA Professor Dr. Eng. Tokyo Metropolitan Univ. Tokyo, Japan Torahiko IKEDA ridge Engineer M.
More informationMultideck 50-V2 Features and Applications
Features and Applications is a dovetail profile deck with a depth of 50mm providing spans up to 4m unpropped. Greater Design Efficiency The larger range of Multideck gauge thicknesses available allow much
More informationBridge Overhang Brackets
Bridge C49, C49D, C49S and C49JR Bridge Dayton Superior offers the bridge contractor four different Horizontal Length versions of the C49 Bridge Bracket, which allows for maximum adjustability to meet
More informationPO W ERCO N H A N D LIN G SYST EM S (PT Y) LT D.
POWERCON CR MONORAIL SYSTEM GUIDE About us: POWERCON HANDLING SYSTEMS specialises in complete overhead monorail conveyors as well as complete Turnkey Operation and Factory Automation projects. Established
More informationWhy Rivet-Span? Primary Components. RIVET-SPAN IS AN ECONOMICAL AND VERSATILE hand-load storage product
Rivet-Span Why Rivet-Span? RIVET-SPAN IS AN ECONOMICAL AND VERSATILE hand-load storage product that is incredibly easy to assemble, yet strong. It starts with a simple, economical design. A unit consists
More informationM3 & M4 Mounts. 8 3 ISO M6 x 20 or Hexagon Socket Head Cap. 7 6 ISO M6 x 35 or Hexagon Socket Head Cap
9 0 G H S - M x Hexagon Socket Head ap 0 S - M orm Spring Washer 9 ISO - M x or Hexagon Socket Head ap S eqivalent ISO - M x 0 or Hexagon Socket Head ap S eqivalent ISO - M x or Hexagon Socket Head ap
More information66M C5 4 x 50, Category 5, 66M connecting block clip. 10"H x 3.4"W x 1.25"D
66 BLOCK SYSTEM Suttle s 66 Block system is used in equipment rooms or in remote and intermediate wiring closets to connect voice or data wiring to customer premise equipment. Blocks are molded of flame
More informationEDGE METAL & ACCESSORIES FOR SINGLE-PLY ROOFING SYSTEMS
EDGE METAL & ACCESSORIES FOR SINGLE-PLY ROOFING SYSTEMS OUR PROMISE THROUGH ONGOING INTERCHANGE OF EXPERIENCES WITH CONTRACTORS, MULE-HIDE KEEPS ON TOP OF THE LATEST ROOFING REQUIREMENTS AND SOLUTIONS
More informationLinear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
More information03-04 Mach 1. Hellion Power Systems Mach 1 Kit Instructions
Hellion Power Systems 03-04 Mach 1 Kit Instructions Part 1 Hellion recommends that the front suspension system be installed either by trained professionals or by 5.Remove rack bolts K-Member Installation
More informationDIVISION: METALS SECTION: STEEL DECKING REPORT HOLDER: 2100 REXFORD ROAD CHARLOTTE, NORTH CAROLINA EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 3 658 (56) 699 053 www.icc es.org ESR 1 Reissued 1/01 This report is subject to renewal 1/0. DIVISION: 05 00 00 METALS SECTION:
More informationESR-2408 Reissued August 2014 This report is subject to renewal August 2015.
ICC-ES Evaluation Report ESR-2408 Reissued August 2014 This report is subject to renewal August 2015. www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council DIVISION:
More information