PO W ERCO N H A N D LIN G SYST EM S (PT Y) LT D.

Size: px
Start display at page:

Download "PO W ERCO N H A N D LIN G SYST EM S (PT Y) LT D."

Transcription

1 POWERCON CR MONORAIL SYSTEM GUIDE About us: POWERCON HANDLING SYSTEMS specialises in complete overhead monorail conveyors as well as complete Turnkey Operation and Factory Automation projects. Established in 1982, our track record speaks for itself. We believe in building long-term relationships with our customers by continuously designing and manufacturing the highest quality products while continuously exceeding our customer s expectations in material handling solutions. Our work ethics and dedication make us the leaders in our field. Our factory incorporates the following facilities: In-House CAD drawing / design office Our own sheet metal works with bending breaks, punching and guillotine Our own fully equipped machine shop In-house roller manufacturing with high speed presses / swages Laser cutting large format laser cutter Electrical workshop (Robotics engineering level) We are one of the largest supplier of components to the industry This means we manufacture all our own conveyors and stock components in-house so that we have complete control over delivery lead times, quality of workmanship and the ability to assemble and test every part of a system before dispatching. We can dispatch spares immediately if required. Even replacement conveyor frames are manufactured from scratch and can be dispatched within 24 hours if necessary. Why use a Powercon CR 45 and CR60 series Monorail system: 1. Keep valuable floor space clear. Many factories have unused space in the air or rafters that is not utilised. 2. High temperature applications for powder coating systems 3. Doubles as storage and buffering of product Page 1 of 18

2 4. Cost effective option to alternative options 5. High efficiency with low power consumption 6. Easy installation 7. Low maintenance costs 8. Safe 9. Clean 10. Versatile 11. Easily re-routed or modified 12. Robust drop forged construction 13. Close pitch on pendants (150mm) means by moving the removable pendant the life span can be significantly extended further 14. Bi-planer chain allows for multi direction options 15. Excellent after sales support Options: CR45 CR60 Riveted wheel arrangements for both vertical and horizontal wheels Solid machine wheels for both vertical and horizontal wheels, suitable for heavier loads and longer systems with a large number of bends. Powercon Monorail conveyor (CR 45 or CR60) This system is utilising the conveyor to store components for the duration of the curing time. Once the components paint is dry, it can be removed and packed. Page 2 of 18

3 Here a monorail conveyor is used to provide elevated storage while avoiding manufacturing and other critical manufacturing equipment, then lowering at various loading and off-loading stations. This ensures valuable floor space is maximized. Monorail for moving boxes or crates Page 3 of 18

4 Guidelines for POWERCON OVERHEAD MONORAIL At POWERCON, we offer complete turnkey solutions including the design, drawings, specifications and installation as required. However, should you wish to install your own unit, here are a few guide lines to consider when designing your conveyor. 1. Locate a convenient conveyor path. Consider keeping lines parallel and close to simplify support structures and eliminate wasted space. 2. Establish where suitable loading and offloading areas should be. Take into consideration situations such cooling may be required after an oven or drying time for paint. 3. Consider the material to be handled per minute or hour, spacing and clearances required between the products. Longer items may require larger turning spaces. 4. Determine number of carriers per minute or hour. 5. Consider whether supports require being floor mounted and/or roof mounted. There are many options available and in some cases we can use a variety of options simultaneously. 6. Verify all clearances, both horizontal and vertical taking walls, columns etc into consideration. 7. Consider the environment; ovens require expansion joints and track should be run outside of wash tunnels. 8. A layout drawing with elevations will assist us in advising best position for drive, take-up, service unit and expansion joint placement. Show loading and off loading positions as well as much information regardless of whether or not it seems significant. 9. Allow a minimum of 300mm between directional vertical / horizontal changes. 10. Calculate total chain length of the chain. Add all straight sections, the drive, take-up, inspection units, expansion joints and bends into account. 11. If possible, always position your drive at the highest elevation. 12. Always position the take-up at a low point directly after the drive, without horizontal bends in between the drive and bend if possible. The best position for the take up is always directly after the drive. 13. Longer systems may use multiple drives, but these need to be electrically synchronised. Although in some cases it is possible to use a single 3 phase Variable speed drive, this is only possible if the load can be accurately shared between each unit. Other methods include using Tachometers or any other method with individual variable speed drives and a PLC to monitor each units speed and correct them continuously. It is advisable that an electrical engineer designs a suitable solution. Page 4 of 18

5 Parallel lines share support structures, simplifying supports while reducing costs. CHAIN PULL CALCULATIONS The chain pull calculations are to be used conservatively and are to be used as a guide line only. There are many factors to take into account including system age and condition, loading, ambient temperatures, number of bends etc. Here is an example of a typical system chain pull calculation. Please consider that in vertical inclines and declines, the loads cancel each other. However, if the full load in exists on inclined bends but not on declines, you need to factor these loads into the equation. Conveyor load capacity: Recommended load: CR45-45kg maximum per pendant CR60-60kg maximum per pendant (A 30% safety factor should be considered in the load capacity) Example (basic chain pull calculation): Conveyor chain length: 120m Weight of chain: 5kg per meter Weight of product: 40 kg Product spacing: 1,2m (100 pendants used in total) Carrier bar weight: 3kg Number of 90 bends: 12 Speed: 10m/min Therefore: Total load = (120X5kg) + (100X40) + (100X3) = 4,900kg total load. Rolling friction = 5% (4%-8% depending on system layout use chart below) 4,900 X 5% = 245kg = 540Lb Page 5 of 18

6 The total permissible chain pull is 10, 000Lb, therefore this is a safe load situation. Should the loading exceed 10, 000Lb, 2 drives or more may be required. Drive units should be evenly spaced, evenly loaded throughout the system and they should be electrically synchronized. Rolling friction chart: Take all horizontal and vertical bends into consideration. Conveyor with 0-10 X 90 bends 4% Conveyor with X 90 bends 5% Conveyor with X 90 bends 6% Conveyor with X 90 bends 8% It is recommended that an engineers safety factor of 30% be factored in. DETERMINING THE CONVEYOR LINE SPEED Conveyor speed is determined by a combination of carrier capacity and spacing as shown below: V = Q x P V = Conveyor speed (meter/min) Q = Quantity of carriers to be handled (no/min) P = Carrier spacing (meter) COMPONENT IDENTIFICATION: Caterpillar Drive unit (Basic unit, without drive motor) Page 6 of 18

7 CR45 Chain (1) and CR60 Chain (2) Both chains have 10,000Lb breaking strain but the wheel design determines the load capacity. The HD CR 60 is also recommended for longer systems with a large number of bends. Other models of this is chain is also available on request CR single pendant are standard and double pendants are available on request: CR Track is supplied as follows: Straight sections 3m long lengths 57mm X67mm Horizontal bends are supplied in Radius 600mm Vertical up / down bends are supplied in Radius 750mm All sections can be supplied with or without joining flanges Page 7 of 18

8 Hanger (optional rotating fork and drip tray) There are many options available here, either off the shelf or as special design. Allow Powercon Handling Systems to design an attachment to suit your unique application. CR Take-up unit Take-up units are offered in 1,2m CRS or 2,5m CRS with duel tension spring arrangement. The standard unit uses duel spring tensioners to maintain constant line tension while remove chain slack created by the drive in some cases. Optional pneumatic take up units are also available on request. 1,2m CRS take-up Page 8 of 18

9 DRAWINGS: CHAIN / TRACK DIMENSIONS: TAKE UP (1200MM SHOWN) Page 9 of 18

10 EXPANSION JOINT TRACK FLANGES Page 10 of 18

11 DRIVE UNIT OVERALL DIMENSIONS HORIZONTAL BENDS SUPPLIED IN ANY ANGLE REQUIRED Page 11 of 18

12 VERTICAL UP AND DOWN BENDS SERVICE UNIT (LUBRICATOR AND INSPECTION SECTION) Page 12 of 18

13 TRACK CLAMPING SYSTEM SINGLE SCISSOR PENDANT Page 13 of 18

14 JOINING CLAMPS FOR BUTT WELDING TRACK VARIABLE SPEED PANEL: Page 14 of 18

15 ANCILLARY COMPONENTS Page 15 of 18

16 Daily: MAINTENANCE SCHEDULE Before start up the following inspection needs to be carried out: 1. Check for loose components or damage 2. Ensure no obstructions with chain and or hangers 3. Check there is sufficient tension on take-up springs 4. In the event you have multiple drives, ensure the take-up units are evenly tensioned 5. Check for oil leaks 6. Ensure chain is lubricated 7. Check for abnormal wear 8. Ensure chain is sufficiently lubricated (should appear moist) Weekly: 1. Open inspection section and inspect chain for lubrication and damage 2. Check drive unit pressure bar, drive chain and bottom plates for wear 3. Check primary drive chain and sprockets for wear and correct tension 4. Check chain tension on conveyor If pendants are held between the two fingers and pushed upwards, it should move upwards by approximately millimetres. (Do this at the inspection section with the lid removed) 5. Check free movement of the tensioner / take-up unit. 6. Check correct operation and cleanliness of the torque limiter if fitted. To adjust it - Loosen the three adjusting bolts until the clutch slips under full load. Tighten each adjusting bolt by approximately onequarter revolution at a time until the chain moves without any slippage. Finally tighten one-quarter turn each. Torque limiter will now slip if the chain jams, but will not slip under the load. Lubrication: Lubricate chain weekly for at least 3-4 circulations on the circuit until the chain is visibly wet. Only use Omega 613 High temperature oil or equivalent SAE 10 suitable for high temperatures and micro fog applications. N.B. We recommend Omega 613 for all high temperature applications. Failure to use this oil may result in your guarantee being void. Lubrication method: This method is for a line running at approximately 2-3m/min (most common speed for powder coating conveyors). Should you be running your line faster or slower, you may want to vary step 2 accordingly. 1. Set air pressure on regulator 2-3 bars. 2. Open oil regulator to at least 1 drop of oil per second. 3. Check physically if lubrication reaches the chain and bearings. 4. Use only OMEGA 613 molybdenum based lubricant. 5. Over-lubrication can cause dripping on products without serving any real purpose. Page 16 of 18

17 Monthly: 1. Check gearbox oil level and check for any leaks 2. Apply, if necessary, appropriate grease to the transmission chain, taking care not to allow any grease to drip onto the torque limiter. 3. Check for any excess wear on bearings. 4. Check for any wear on track and bends. 5. If V- belt driven, check for V-belt wear, as well as free operation of springloaded variable speed pulley. 6. Lubricate chain monthly or as required as per schedule above Low temperature application Chain: Besides lubrication, chain tension is important. A general rule is the springs should be tensioned to approximately 180% of their original length. Wear Patterns: Wear grooves may appear on the friction surfaces over an extended period of time. This is a normal wear condition, and does not impair functioning of the unit. Never machine the friction surface to remove grooves or score marks resulting from normal wear. Motors and Gearboxes (Reducers): Except for keeping the units clean and checking the level of oil in the gearboxes maintenance of these units is minimal. Oil levels in gearboxes should be checked when unit is warm, but not running. If either unit fails, replace it with the same unit. Send the failed unit to the nearest service representative for repairs. Sprockets: Sprockets should be checked for proper alignment, that they are securely fastened to shafts and that they are wearing in a normal fashion. If sprockets show signs of wearing on the sides of their teeth, this is an indication of miss-alignment. If the tips of their teeth are wearing off this is a sign of an elongated chain or a loose chain. Note: When replacing sprockets, or chains it is advisable that they both be changed. Taper Lock Hubs/Bushings (when used): The proper installation of taper lock bushing is critical. If not installed properly, the bushings can break loose, with the potential of damage to equipment and a safety hazard for personnel. Please follow the following instructions for installation of taper lock bushings: Refer to supplier for torque setting of bushes. TROUBLE SHOOTING Premature wear: - Lack of lubrication - Exposure to abrasives - Corrosion - Conveyor over-loaded Page 17 of 18

18 Slipping clutch / tripping System surges: Oil dripping on parts Drive jumping - Conveyor Overloaded - Excessive chain stretch - Slack Conveyor Chain Backing into the Drive Unit - Pinched Track - Caterpillar Chain Damaged - Clutch Friction Liners Worn Out - Worn bends - Pendant, Hook, or Load Hang-ups - Slack Chain - Excessive Chain Pull - Pinched Track - Excessive Chain Length - Defective Drive - Common with extremely slow moving conveyor lines - Over lubricated, reduce the lubrication rate and monitor - Chain needs to be services / cleaned - Slack Chain - Misaligned Track Joints - Take-up not set up properly or ineffective - Drive chain worn needs replacing It is not always possible to diagnose every issue, therefore we recommend calling out a Powercon trained technician. Notes: Page 18 of 18

INSTRUCTION MANUAL FOR MODEL TAC - TRAY ACCUMULATOR CONVEYOR SYSTEM MONORAIL STYLE

INSTRUCTION MANUAL FOR MODEL TAC - TRAY ACCUMULATOR CONVEYOR SYSTEM MONORAIL STYLE INSTRUCTION MANUAL FOR MODEL TAC - TRAY ACCUMULATOR CONVEYOR SYSTEM MONORAIL STYLE - 1 - T A TABLE OF CONTENTS C 1. OPERATION 3 1.1. START INSTRUCTIONS 3 1.2. STOP INSTRUCTIONS 3 2. PREVENTIVE MAINTENANCE

More information

Signature Overhead System INSTALLATION MANUAL

Signature Overhead System INSTALLATION MANUAL Signature Overhead System TM INSTALLATION MANUAL PACLINE Installation Manual Read All Instructions Carefully Proper installation is not difficult, and by adhering to the following procedures the conveyor

More information

TABLE OF CONTENTS Section Page 12 Benefits of Rapid Overhead Conveyors Glossary 4-6 Track and Accessories 7-9 Trolleys and Chain Attachments

TABLE OF CONTENTS Section Page 12 Benefits of Rapid Overhead Conveyors Glossary 4-6 Track and Accessories 7-9 Trolleys and Chain Attachments Z TABLE OF CONTENTS Section Page 12 Benefits of Rapid Overhead Conveyors 3 Glossary 4-6 Track and Accessories 7-9 Trolleys and Chain 10-14 Attachments 15-16 Load Bar Assemblies 17 Conveyor Accessories

More information

B.I. Brooks and Sons Inc. Overhead Conveyor

B.I. Brooks and Sons Inc. Overhead Conveyor B.I. Brooks and Sons Inc. Overhead Conveyor 3 and 4 I-Beam Conveyor Components X348 and X458 Track, Chain, and Trolleys Roller Turns and Traction Wheel Turns Drive Units Chain Take Ups in business since

More information

Tel: (905) Fax: (905) BELT ON ROLLER CONVEYOR OWNERS MANUAL

Tel: (905) Fax: (905) BELT ON ROLLER CONVEYOR OWNERS MANUAL Tel: (905) 624-6499 Fax: (905) 624-0228 BELT ON ROLLER CONVEYOR OWNERS MANUAL Table of Contents INTRODUCTION... 3 SAFETY WARNINGS... 5 BEFORE STARTING MAINTENANCE... 5 DURING MAINTENANCE... 5 AFTER MAINTENANCE...

More information

Installation and Main te nance Manual. Model RB190, SB350, RBI190, & SBI350 Effective June, 2005

Installation and Main te nance Manual. Model RB190, SB350, RBI190, & SBI350 Effective June, 2005 Installation and Main te nance Manual Model RB190, SB350, RBI190, & SBI350 Effective June, 2005 Contents Warning Labels... 3 Receiving & Uncrating... 4 Installation Saftey...5 Assembly... 6 Set-Up... 7

More information

750 Series Press Conveyor Installation and Maintenance Manual

750 Series Press Conveyor Installation and Maintenance Manual 750 Series Press Conveyor Installation and Maintenance Manual Metzgar Conveyor Co. - 2010 METZGAR CONVEYORS SAFETY PRECAUTIONS WARNING: DO NOT ATTEMPT MAINTENANCE ON ANY CONVEYORS WHILE IN OPERATION. BEFORE

More information

3.25, 4.5, 7.5 Tabletop Conveyor Specifications

3.25, 4.5, 7.5 Tabletop Conveyor Specifications 3.25, 4.5, 7.5 Tabletop Conveyor Specifications Complete Conveyor Systems and Equipment Conveyor Specifications Frame Material Thickness Material Finish Design 12 GA Mild steel Stardust Silver" powder

More information

5683EN. Conveyor system WL. Conveyor assembly manual. Created by EBCCW 00:06

5683EN. Conveyor system WL. Conveyor assembly manual. Created by EBCCW 00:06 Created by EBCCW 00:06 by EBCCW 96:05 00:06 5683EN Conveyor system WL Conveyor assembly manual Created by EBCCW 96:05 00:06 Created by EBCCW 00:06 by EBCCW 96:05 00:06 5683EN Conveyor system WL Created

More information

Before equipment use, please read this operation manual carefully. Serial Number: Date Purchased:

Before equipment use, please read this operation manual carefully. Serial Number: Date Purchased: Pushed & Geared Trolleys OPERATION MANUAL This operation manual is intended as an instruction manual for trained personnel who are in charge of installation, maintenance, repair etc. Before equipment use,

More information

DynaCon Instruction Manual

DynaCon Instruction Manual DynaCon Instruction Manual Table of Contents Technical Specification & Warranty.... 3 Construction, Benefits & Safe Operating Procedures... 4 Noise Levels... 5 Installation, Operation & Maintenance...

More information

INSTALLATION AND MAINTENANCE MANUAL DRAG CHAIN CONVEYOR MODEL DC-60

INSTALLATION AND MAINTENANCE MANUAL DRAG CHAIN CONVEYOR MODEL DC-60 INSTALLATION AND MAINTENANCE MANUAL DRAG CHAIN CONVEYOR MODEL DC-60 Version 2014.1 - - TABLE OF CONTENTS INTRODUCTION Receiving, Inspection and Uncrating... 3 Ordering Replacement Parts... 3 SAFETY INFORMATION

More information

ROSTA MOTORBASES ROSTA. Self-Tensioning Motor Mount for Belt Drives. without slippage self-adjusting maintenance-free

ROSTA MOTORBASES ROSTA. Self-Tensioning Motor Mount for Belt Drives. without slippage self-adjusting maintenance-free MOTORBASES Self-Tensioning Motor Mount for Belt Drives without slippage self-adjusting maintenance-free Technology Tensioning Motorbase Type MB for Belt Drives The elastic tensioning motorbase type MB,

More information

B DUAL DRUM SANDER

B DUAL DRUM SANDER OWNER S MANUAL B2022-25 DUAL DRUM SANDER INDEX GENERAL SAFETY INSTRUCTIONS Page 3 Specifications Page 4 Features Page 5 Assembly Instructions Initial Assembly Page 6 Installing Abrasives Page 7 Adjusting

More information

RolsplicerTM. Maintenance Manual And Illustrated Parts List

RolsplicerTM. Maintenance Manual And Illustrated Parts List RolsplicerTM Maintenance Manual And Illustrated Parts List List of Illustrations Figure Page. Rolsplicer 3 2. Roller Adjustment 4 3. Rolsplicer 6 4. Lid Hold Down Assembly 8 5. Automatic Lid Speed Adjustment

More information

Index. 1. Important safety instructions Overview of the lift Installation instructions Operation instructions 8-9

Index. 1. Important safety instructions Overview of the lift Installation instructions Operation instructions 8-9 2 Index 1. Important safety instructions 4-5 1.1 Safety Warnings 1.2 Qualified personnel 1.3 Safety 1.4 Warning signs 2. Overview of the lift 6 2.1 General descriptions 2.2 Technical data 2.3 Construction

More information

Marine Engineering Exam Resource Review of Couplings

Marine Engineering Exam Resource Review of Couplings 1. What are rigid couplings used for? Used to join drive shafts together. True alignment and rigidity are required. Example Drive shafts and production lines, bridge cranes, solid shaft that needs to be

More information

MAINTENANCE - LPX PORTABLE TREATER

MAINTENANCE - LPX PORTABLE TREATER MAINTENANCE - LPX PORTABLE TREATER Proper maintenance of the Portable LPV Treater is critical for peak performance, reliability and accuracy of this system. The following is a guideline for the type of

More information

Conveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer

Conveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear

More information

Timing Belt Installation

Timing Belt Installation Timing Belt Installation The following is an installation guideline designed to combat problems resulting from improper installation of timing belt drives. 1) Loosen Motor. Check to make sure that the

More information

Installation and Maintenance Instructions JSE1-0128MAEAD Extruder Clutch. World Leader in Modular Torque Limiters

Installation and Maintenance Instructions JSE1-0128MAEAD Extruder Clutch. World Leader in Modular Torque Limiters World Leader in Modular Torque Limiters Installation and Maintenance Instructions JSE1-0128MAEAD Extruder Clutch 1304 Twin Oaks Street Wichita Falls, Texas 76302 (940) 723-7800 Fax: (940) 723-7888 E-mail:

More information

LUBRICATION, INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS FOR STAINLESS STEEL CONE DRIVE SPEED REDUCERS

LUBRICATION, INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS FOR STAINLESS STEEL CONE DRIVE SPEED REDUCERS LUBRICATION, INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS FOR STAINLESS STEEL CONE DRIVE SPEED REDUCERS Cone Drive double-enveloping worm gear speed reducers are used throughout industry to provide

More information

4", 8", 12", 18", 24" Belt Conveyor Specifications

4, 8, 12, 18, 24 Belt Conveyor Specifications 4", 8", 12", 18", 24" Belt Conveyor Specifications Complete Conveyor Systems and Equipment Conveyor Specifications Frame Material Thickness Material Finish Design 12 GA Stainless Steel #4 polish finish

More information

TABLE OF CONTENTS PART 7 - MACHINERY AND MACHINERY GUARDING

TABLE OF CONTENTS PART 7 - MACHINERY AND MACHINERY GUARDING TABLE OF CONTENTS PART 7 - MACHINERY AND MACHINERY GUARDING Page DEFINITIONS...7-1 SAFEGUARDS...7-1 GUARDING...7-2 PULLEYS, BELTS AND BELT-SHIFTERS...7-3 CONTROLS...7-3 FLYWHEELS...7-3 GRINDING WHEELS...7-3

More information

MECHANICAL OVERLOAD CLUTCHES SECTION CONTENTS

MECHANICAL OVERLOAD CLUTCHES SECTION CONTENTS TRIG-O-MATIC LITE MECHANICAL OVERLOAD CLUTCHES LOR SERIES SECTION CONTENTS FEATURES...8 OPERATING PRINCIPLES...8 SELECTION...9 HOW TO ORDER...9 RATINGS AND DIMENSIONS...10 MOUNTING ARRANGEMENTS...11 BUSHING

More information

Installation and Maintenance Instructions JSE2-0241MAEAD Extruder Clutch. World Leader in Modular Torque Limiters

Installation and Maintenance Instructions JSE2-0241MAEAD Extruder Clutch. World Leader in Modular Torque Limiters World Leader in Modular Torque Limiters Installation and Maintenance Instructions JSE2-0241MAEAD Extruder Clutch 1304 Twin Oaks Street Wichita Falls, Texas 76302 (940) 723-7800 Fax: (940) 723-7888 E-mail:

More information

OPERATION SERVICE PARTS TUGIT2. Manually Operated Short Handle Lever Hoist A3140-XXX

OPERATION SERVICE PARTS TUGIT2. Manually Operated Short Handle Lever Hoist A3140-XXX OPERATION SERVICE PARTS TUGIT2 Manually Operated Short Handle Lever Hoist A3140-XXX Sold & Serviced by Morgan Aero 1450 80 th Street SW Everett WA U.S.A. 425/438.9600 SAFETY PRECAUTIONS WARNING! Improper

More information

Installation and Maintenance Instructions JSE MAEAD Extruder Clutch. World Leader in Modular Torque Limiters

Installation and Maintenance Instructions JSE MAEAD Extruder Clutch. World Leader in Modular Torque Limiters World Leader in Modular Torque Limiters Installation and Maintenance Instructions JSE.5-0104MAEAD Extruder Clutch 1304 Twin Oaks Street Wichita Falls, Texas 76302 (940) 723-7800 Fax: (940) 723-7888 E-mail:

More information

Randy Recommends... If your bike has chain drive, here are some things you should know.

Randy Recommends... If your bike has chain drive, here are some things you should know. Chains part 1: Sizing Motorcycle drive chains are made up of alternating internal links and external links, connected by pins. The internal links consist of two plates connected to each other through two

More information

HQZ & RBM MODEL LIFT & TRANSFERS

HQZ & RBM MODEL LIFT & TRANSFERS Technical Documentation HQZ & RBM MODEL LIFT & TRANSFERS Each serial number is unique to that specific conveyor and provides mk North America with complete order details. The conveyor serial number is

More information

INSTALLATION, OPERATION AND MAINTENANCE MANUAL WALL EXHAUST FANS BELT & DIRECT DRIVE XB, HV, HVA, ADD, DDS, DDP

INSTALLATION, OPERATION AND MAINTENANCE MANUAL WALL EXHAUST FANS BELT & DIRECT DRIVE XB, HV, HVA, ADD, DDS, DDP INSTALLATION, OPERATION AND MAINTENANCE MANUAL WALL EXHAUST FANS BELT & DIRECT DRIVE XB, HV, HVA, ADD, DDS, DDP The purpose of this manual is to aid in the proper installation and operation of the fans.

More information

The gear boxes can be run at the same speeds as the actuator models. Do not exceed torque ratings.

The gear boxes can be run at the same speeds as the actuator models. Do not exceed torque ratings. 1. What is the lifting torque required? The lifting torque for a single actuator depends on the load, the worm gear ratio, type of screw (machine cut or ball screw) and the pitch of the lifting screw.

More information

I-BEAM 348 and 458 Overhead Heavy Duty Monorail Conveyor

I-BEAM 348 and 458 Overhead Heavy Duty Monorail Conveyor I-BEAM 348 and 458 Overhead Heavy Duty Monorail Conveyor Standard Conveyor 2 3/8" 1" Ø11/16" 4" 8" 41 Standard Conveyor I-BEAM TRACK & CHAIN 3" & 4" I-BEAM TRACK Hi-Carbon Steel Track The Richards-Wilcox

More information

701 & 801 Series Belt Conveyor Installation and Maintenance Manual

701 & 801 Series Belt Conveyor Installation and Maintenance Manual 701 & 801 Series Belt Conveyor Installation and Maintenance Manual Metzgar Conveyor Co. - 2010 METZGAR CONVEYORS SAFETY PRECAUTIONS WARNING: DO NOT ATTEMPT MAINTENANCE ON ANY CONVEYORS WHILE IN OPERATION.

More information

INSTALLATION AND MAINTENANCE MANUAL TROUGH BELT CONVEYOR MODEL TBOH

INSTALLATION AND MAINTENANCE MANUAL TROUGH BELT CONVEYOR MODEL TBOH INSTALLATION AND MAINTENANCE MANUAL TROUGH BELT CONVEYOR MODEL TBOH Version 2014.1 - - TABLE OF CONTENTS INTRODUCTION Receiving, Inspection and Uncrating... 3 Ordering Replacement Parts... 3 SAFETY INFORMATION

More information

ZRF-P 2040 TIMING BELT CONVEYOR

ZRF-P 2040 TIMING BELT CONVEYOR Technical Documentation ZRF-P 2040 TIMING BELT CONVEYOR Each serial number is unique to that specific conveyor and provides mk North America with complete order details. The conveyor serial number is located

More information

BX7322 Adventurer Tow Bar Operator Manual & Installation Instructions. (5,000 lb) 2 Inch Coupler

BX7322 Adventurer Tow Bar Operator Manual & Installation Instructions. (5,000 lb) 2 Inch Coupler Operator Manual & Installation Instructions (5,000 lb) 2 Inch Coupler General Information DO NOT INSTALL, OPERATE OR USE THIS EQUIPMENT UNTIL THE FOLLOWING OPERATING AND SAFETY INSTRUCTIONS HAVE BEEN READ

More information

Mechanical Equipment - Course 230.1

Mechanical Equipment - Course 230.1 Mechanical Equipment - Course 230.1 BELT DRIVES A conunon method of transmitting power is a combination of belts and pulleys, There are many types of belts and pulleys used for the transmission of power

More information

INSTALLATION AND MAINTENANCE MANUAL BELT DRIVEN LIVE ROLLER CONVEYOR

INSTALLATION AND MAINTENANCE MANUAL BELT DRIVEN LIVE ROLLER CONVEYOR INSTALLATION AND MAINTENANCE MANUAL BELT DRIVEN LIVE ROLLER CONVEYOR Version 2014.1 - - TABLE OF CONTENTS INTRODUCTION Receiving, Inspection and Uncrating... 3 Ordering Replacement Parts... 3 SAFETY INFORMATION

More information

Tel: (905) Fax: (905) CDLR CONVEYOR OWNERS MANUAL

Tel: (905) Fax: (905) CDLR CONVEYOR OWNERS MANUAL Tel: (905) 624-6499 Fax: (905) 624-0228 CDLR CONVEYOR OWNERS MANUAL Table of Contents INTRODUCTION... 3 SAFETY WARNINGS... 5 BEFORE STARTING MAINTENANCE... 5 DURING MAINTENANCE... 5 AFTER MAINTENANCE...

More information

Gantry System for both Floor and Roof Truss Lines SQ-1 INTELLIGENT GANTRY. Operators Manual

Gantry System for both Floor and Roof Truss Lines SQ-1 INTELLIGENT GANTRY. Operators Manual Gantry System for both Floor and Roof Truss Lines SQ-1 INTELLIGENT GANTRY Operators Manual FOREWORD This manual explains the proper maintenance of Square 1 Design Gantry Rollers as well as the daily lubrication

More information

Maintenance and Repair

Maintenance and Repair Maintenance and Repair WARNING ALWAYS shut off the engine, remove key from ignition, make sure the engine is cool, and disconnect the spark plug and positive battery terminal from the battery before cleaning,

More information

INSTALLATION, OPERATION AND MAINTENANCE MANUAL WALL EXHAUST FANS BELT DRIVE XBL FANS

INSTALLATION, OPERATION AND MAINTENANCE MANUAL WALL EXHAUST FANS BELT DRIVE XBL FANS INSTALLATION, OPERATION AND MAINTENANCE MANUAL WALL EXHAUST FANS BELT DRIVE XBL FANS The purpose of this manual is to aid in the proper installation and operation of the fans. These instructions are intended

More information

INSTALLATION AND MAINTENANCE MANUAL BELT CONVEYOR MODEL BS100B

INSTALLATION AND MAINTENANCE MANUAL BELT CONVEYOR MODEL BS100B INSTALLATION AND MAINTENANCE MANUAL BELT CONVEYOR MODEL BS100B Version 2014.1 - - TABLE OF CONTENTS INTRODUCTION Receiving, Inspection and Uncrating... 3 Ordering Replacement Parts... 3 SAFETY INFORMATION

More information

ACI Hoist & Crane. Festoon System. 689 S.W. 7th Terrace Dania, FL (954) Fax (954) Toll Free A-HOIST ( )

ACI Hoist & Crane. Festoon System. 689 S.W. 7th Terrace Dania, FL (954) Fax (954) Toll Free A-HOIST ( ) ACI Hoist & Crane Festoon System 689 S.W. 7th Terrace Dania, FL 33004 (954) 921-1171 Fax (954) 921-7117 Toll Free 1-888-4-A-HOIST (1-888-424-6478) www.acihoist.com 2 Standard Duty C-Track Index 1. General

More information

KFM-P 2040 INCLINE BELT CONVEYOR

KFM-P 2040 INCLINE BELT CONVEYOR Technical Documentation KFM-P 2040 INCLINE BELT CONVEYOR Each serial number is unique to that specific conveyor and provides mk North America with complete order details. The conveyor serial number is

More information

MANUAL TRANSAXLE Return to Main Table of Contents

MANUAL TRANSAXLE Return to Main Table of Contents MANUAL TRANSAXLE Return to Main Table of Contents GENERAL... 2 MANUAL TRANSAXLE CONTROL... 12 SHIFT LEVER ASSEMBLY... 14 MANUAL TRANSAXLE... 15 MANUAL TRANSAXLE ASSEMBLY... 17 FIFTH SPEED SYNCHRONIZER

More information

GUF-P MINI BELT CONVEYOR

GUF-P MINI BELT CONVEYOR Technical Documentation GUF-P MINI BELT CONVEYOR Each serial number is unique to that specific conveyor and provides mk North America with complete order details. The conveyor serial number is located

More information

Modular belt conveyor WL678X

Modular belt conveyor WL678X Modular belt conveyor 678X Contents System information...139 Conveyor sections...140 Modular Belts - Introduction...141 Modular belts...142 Conveyor Beams - Introduction...143 Conveyor frame components...145

More information

MBF-P 2040 PLASTIC MODULAR BELT CONVEYOR

MBF-P 2040 PLASTIC MODULAR BELT CONVEYOR Technical Documentation PLASTIC MODULAR BELT CONVEYOR Each serial number is unique to that specific conveyor and provides mk North America with complete order details. The conveyor serial number is located

More information

GatesFacts Technical Information Library Gates Compass Power Transmission CD-ROM version 1.2 The Gates Rubber Company Denver, Colorado USA

GatesFacts Technical Information Library Gates Compass Power Transmission CD-ROM version 1.2 The Gates Rubber Company Denver, Colorado USA Timing Belt Selection And Troubleshooting David E. Roos Maintenance Technology September 1989 Evenly spaced teeth on the bottom surface of synchronous or timing belts mesh with grooves on the pulleys for

More information

Belt Conveyor Systems

Belt Conveyor Systems Belt Conveyor Systems Product & Installation Manual 24-in, 36-in, and 48-in Widths Manual #: IM-704-01 i 11/14 ii Table of Contents SECTION 1 OVERVIEW 1-1 System Length 1-1 Component Dimensions 1-2 Drive

More information

Modular belt conveyor WL526X

Modular belt conveyor WL526X Modular belt conveyor 526X Modular plastic belt conveyor 526X Contents System information...123 Conveyor sections...124 Modular Belts - Introduction...125 Modular belts...126 Conveyor Beams - Introduction...127

More information

7400 Series End Drive Conveyors

7400 Series End Drive Conveyors 700 Series End Drive Conveyors Installation, Maintenance and Parts Manual Flat Belt Conveyor Cleated Belt Conveyor DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 0 975 Cottonwood Ave. TEL: -800-97-866

More information

Webb Chain Conveyors. Technical Selection Guide for Conveyor Components. Power Only Overhead and Inverted Conveyors. Hand Pushed Trolleys

Webb Chain Conveyors. Technical Selection Guide for Conveyor Components. Power Only Overhead and Inverted Conveyors. Hand Pushed Trolleys Webb Chain Conveyors Technical Selection Guide for Conveyor Components Power Only Overhead and Inverted Conveyors Hand Pushed Trolleys Chain-on-Edge Floor Conveyors ISO 9001 Registered Our mission is to

More information

Installation and Operation Manual. Manufacturers of Innovative Materials Handling Equipment since 1957.

Installation and Operation Manual. Manufacturers of Innovative Materials Handling Equipment since 1957. SWINGSET DISTRIBUTOR Installation and Operation Manual Manufacturers of Innovative Materials Handling Equipment since 1957. 491 North Emerson Street * Cambridge MN 55008-1316 U.S.A. Toll Free (800) 328-8002

More information

Modular belt conveyor WL374X

Modular belt conveyor WL374X S Modular belt conveyor Contents System information...107 Conveyor sections...109 Modular Belts - Introduction...110 Modular belts...111 Conveyor Beams - Introduction...112 Conveyor frame components...114

More information

Tech Note Truck 14 & 15.5 Twin Plate Cast Iron Type Installation Guidelines

Tech Note Truck 14 & 15.5 Twin Plate Cast Iron Type Installation Guidelines 1. (14 & 15.5 ) Check condition of the flywheel. Grind to resurface or replace flywheel. Surface MUST BE machined or premature clutch failure can occur. Flywheel depth must be 2.938 (74.62mm) for 14 (350mm)

More information

MicroSpan. Transfers. Transfers. 1 revised SpanTech LLC

MicroSpan. Transfers. Transfers. 1 revised SpanTech LLC Transfers MicroSpan Transfers 1 revised -7 revised -7 2 Contents Overview... 4 Nose Bar Dimensions... MicroSpan Chain Types... 6 MicroSpan Features... 7 Power Transmission... 7 Variable Angles... 8 Lift

More information

Instruction Manual For Auto Shift Hydraulic Lift Table

Instruction Manual For Auto Shift Hydraulic Lift Table Instruction Manual For Auto Shift Hydraulic Lift Table Model Number: CART-550-AS Note: Owner/Operator must read and understand this Instruction Manual before operating the lift & tilt table. Contents 1

More information

OWNER S MANUAL EPT-55 ! WARNING! HAND PALLET TRUCK

OWNER S MANUAL EPT-55 ! WARNING! HAND PALLET TRUCK HAND PALLET TRUCK EPT-55 OWNER S MANUAL! WARNING! DO NOT OPERATE OR SERVICE THIS PRODUCT UNLESS YOU HAVE READ AND FULLY UNDERSTOOD THE ENTIRE CONTENTS OF THIS MANUAL. FAILURE TO DO SO MAY RESULT IN PROPERTY

More information

tRIPr Chief Grain Cart. Operator s Manual. Operator s Manual

tRIPr Chief Grain Cart. Operator s Manual. Operator s Manual 125-000-01 125-000-01 1tRIPr 1tRIPr Operator s Manual 1210 Chief Grain Cart Operator s Manual Operator s Manual TO THE DEALER Predelivery/Delivery Checklist 1210 Grain Cart PREDELIVERY/DELIVERY CHECKLIST

More information

ROLLER CHAIN SPROCKETS INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3

ROLLER CHAIN SPROCKETS INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3 Index SECTION E ROLLER CHAIN SPROCKETS PRODUCT PAGE INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3 SECTION I STANDARD SPROCKETS...E-4 E-112 Shear Pin Sprockets, Bolt-On...E-4 E-6 Type D Sprockets, Detachable

More information

The Importance Of Proper. Maintenance Inspections On Belt Conveyors

The Importance Of Proper. Maintenance Inspections On Belt Conveyors On Belt Conveyors By Neil Kinder & Charles Pratt Equipment Characteristics Irrespective of the material, the same type of conveyors are used, all using the same technology, operating principles, operating

More information

Aerowerks Toll Free :

Aerowerks Toll Free : Toll Free : 888-774-1616 Fax : (905)-363-6998 URL: www.aero-werks.com 1 Aerowerks 2018 TABLE OF CONTENTS 1. OPERATION 3 1. START AND STOP INSTRUCTIONS 3 2. PREVENTIVE MAINTENANCE 4-6 2. PREVENTIVE MAINTENANCE

More information

PAGE 1 OF 5 HEALTH, SAFETY & ENVIRONMENTAL MANUAL PROCEDURE: S360 Overhead Cranes & Lifts Procedure REV 4.0 8/14/2012

PAGE 1 OF 5 HEALTH, SAFETY & ENVIRONMENTAL MANUAL PROCEDURE: S360 Overhead Cranes & Lifts Procedure REV 4.0 8/14/2012 PAGE 1 OF 5 PURPOSE: OVERHEAD CRANES AND LIFTS PROCEDURE The purpose of this procedure is to define the safety and training requirements for use of overhead cranes and lifts. Procedure: Definitions Designated

More information

Premium Dry Freight (Plywood) Door Installation REFERENCE FIGURE 1

Premium Dry Freight (Plywood) Door Installation REFERENCE FIGURE 1 Premium Dry Freight (Plywood) Door Installation A Premium door can be identified as usually having a two-spring balancer, 2 diameter (nominal) rollers, and end hinges with removable covers. If your Whiting

More information

LESSON Transmission of Power Introduction

LESSON Transmission of Power Introduction LESSON 3 3.0 Transmission of Power 3.0.1 Introduction Earlier in our previous course units in Agricultural and Biosystems Engineering, we introduced ourselves to the concept of support and process systems

More information

Serial N... MX1 Chain Driven Pipe Cutting and Bevelling Machine Parts and Operating Manual

Serial N... MX1 Chain Driven Pipe Cutting and Bevelling Machine Parts and Operating Manual Serial N... MX1 Chain Driven Pipe Cutting and Bevelling Machine Parts and Operating Manual Table of contents Section Description Page 1.0 General Information 2 2.0 Specification 2 2.1 General Specification

More information

DIAMOND ROLLER CHAIN. For Agricultural and Construction Equipment

DIAMOND ROLLER CHAIN. For Agricultural and Construction Equipment DIAMOND ROLLER CHAIN For Agricultural and Construction Equipment FABRICATION While roller chain would appear to be a simple product, the number of components in a ten foot section of 40 pitch chain totals

More information

IMPORTANT INSTRUCTIONS FOR OPERATION & MAINTENANCE OF

IMPORTANT INSTRUCTIONS FOR OPERATION & MAINTENANCE OF IMPORTANT INSTRUCTIONS FOR OPERATION & MAINTENANCE OF CONVEYORS EASIKIT 300 EASIKIT 450 EASIKIT 600, 900, 1200 & 1500 The manufacturer does not accept responsibility for any loss, damage to other equipment,

More information

Please contact us today and allow us to show you how we can help you with your material handling.

Please contact us today and allow us to show you how we can help you with your material handling. LOADING AUTOMATION, INC. Automated Shipping and Receiving Systems www.loading-automation.com LOADING AUTOMATION, INC is proud to announce they are now the exclusive suppliers of the Hydraroll roller track

More information

Installation Operation Maintenance. LSSN Butterfly Valve AGA Approved 50MM - 150MM. QAD#IM6055.REVA

Installation Operation Maintenance. LSSN Butterfly Valve AGA Approved 50MM - 150MM.  QAD#IM6055.REVA LSSN Butterfly Valve Installation Operation Maintenance Licence Number: 5326 www.challengervalves.com.au 1 Index 1. INTRODUCTION 1.1 Design Features 3 1.2 Flange and Pipe Compatibility 4 1.3 Operating

More information

Bellows. GT Exhaust Accessories Installation and Operation Manual. Rev. B. (c) Copyright 2012, GT Exhaust, Inc. All Rights Reserved

Bellows. GT Exhaust Accessories Installation and Operation Manual. Rev. B. (c) Copyright 2012, GT Exhaust, Inc. All Rights Reserved Bellows GT Exhaust Accessories Installation and Operation Manual Rev. B (c) Copyright 2012, GT Exhaust, Inc. All Rights Reserved Published: October 4, 2012 NOTICE The instructions herein must be expressly

More information

Webb-Stiles Enclosed Track

Webb-Stiles Enclosed Track Webb-Stiles Enclosed Track Webb-Stiles Enclosed Track Conveyors utilize the Universal Enclosed Track Chain and many industry standard components for enclosed track conveyors. Enclosed Track Conveyors are

More information

WARNING DO NOT USE THE PRODUCTS IN THIS GUIDE IN AIRCRAFT APPLICATIONS. THE PRODUCTS IN THIS GUIDE ARE NOT INTENDED FOR USE IN AIRCRAFT APPLICATIONS.

WARNING DO NOT USE THE PRODUCTS IN THIS GUIDE IN AIRCRAFT APPLICATIONS. THE PRODUCTS IN THIS GUIDE ARE NOT INTENDED FOR USE IN AIRCRAFT APPLICATIONS. P O W E R T R A N S M I S S I O N P R O D U C T S power transmission belt drive system Installation, Maintenance and Troubleshooting Guide WARNING DO NOT USE THE PRODUCTS IN THIS GUIDE IN AIRCRAFT APPLICATIONS.

More information

Felco Industries, Ltd Grant Creek Road P O Box Missoula, Montana (406) Fax (406)

Felco Industries, Ltd Grant Creek Road P O Box Missoula, Montana (406) Fax (406) Standard Slider Bedding Conveyor Model Number: STD 10-20 Serial Number: Bedding Conveyor Patent Number: 4,462,747 Felco Industries, Ltd. 3660 Grant Creek Road P O Box 16750 Missoula, Montana 59808-6750

More information

Ford Full-Size Rack & Pinion Kit Instructions #

Ford Full-Size Rack & Pinion Kit Instructions # 1949-1951 Ford Full-Size Rack & Pinion Kit Instructions # 8011660 Unisteer offers a limited warranty against all manufacturer defects of their kits and supplied parts. Unisteer will not honor any warranty

More information

CHESTER HOIST AIR LOW HEADROOM CHAIN HOISTS AL-680 SECTION A

CHESTER HOIST AIR LOW HEADROOM CHAIN HOISTS AL-680 SECTION A CHESTER HOIST AIR LOW HEADROOM CHAIN HOISTS AL-680 SECTION A OPERATING and MAINTENANCE INSTRUCTIONS FOR AL SERIES HOISTS Users should refer to the ANSI B30.16 American National Standard and ASME HST-5M

More information

401, 430 & 460 Series Belt Driven Live Roller Conveyor Installation and Maintenance Manual

401, 430 & 460 Series Belt Driven Live Roller Conveyor Installation and Maintenance Manual 401, 430 & 460 Series Belt Driven Live Roller Conveyor Installation and Maintenance Manual Metzgar Conveyor Co. 2010 METZGAR CONVEYORS SAFETY PRECAUTIONS WARNING: DO NOT ATTEMPT MAINTENANCE ON ANY CONVEYORS

More information

Jet Fans. Instruction Manual READ AND SAVE THESE INSTRUCTIONS WARRANTY

Jet Fans. Instruction Manual READ AND SAVE THESE INSTRUCTIONS WARRANTY Jet Fans Instruction Manual READ AND SAVE THESE INSTRUCTIONS WARRANTY All Leader Fan products are guaranteed to be free from defects of workmanship or material and to function satisfactorily when properly

More information

443 / M440 Series Lineshaft Driven Live Roller Conveyor Installation and Maintenance Manual

443 / M440 Series Lineshaft Driven Live Roller Conveyor Installation and Maintenance Manual 443 / M440 Series Lineshaft Driven Live Roller Conveyor Installation and Maintenance Manual Metzgar Conveyor Co. - 2010 METZGAR CONVEYORS SAFETY PRECAUTIONS WARNING: DO NOT ATTEMPT MAINTENANCE ON ANY CONVEYORS

More information

SLIDE DOOR OPERATOR ADDENDUM

SLIDE DOOR OPERATOR ADDENDUM SLIDE DOOR OPERATOR MODELS SD & GSD ADDENDUM 2 YEAR W ARRANTY Serial # (located on electrical box cover) NOT FOR RESIDENTIAL USE 1B6 Installation Date Wiring Type LISTED DOOR OPERATOR SPECIFICATIONS Adjustable

More information

Features / Benefits... PT5-2

Features / Benefits... PT5-2 CONTENTS Features / Benefits................................................... PT5-2 PT Component Specification........................................................ PT5-3 How To Order.......................................................

More information

Wye Connector. GT Exhaust Accessories Installation and Operation Manual. Rev. A. (c) Copyright 2012, GT Exhaust, Inc. All Rights Reserved

Wye Connector. GT Exhaust Accessories Installation and Operation Manual. Rev. A. (c) Copyright 2012, GT Exhaust, Inc. All Rights Reserved Wye Connector GT Exhaust Accessories Installation and Operation Manual Rev. A (c) Copyright 2012, GT Exhaust, Inc. All Rights Reserved Published: April 30, 2012 NOTICE The instructions herein must be expressly

More information

STRUT SPRING COMPRESSOR

STRUT SPRING COMPRESSOR OWNER S MANUAL PRODUCT CODE: 1221T STRUT SPRING COMPRESSOR Capacity Stroke Spring Coil Spring Spring Coil Net Weight (Maximum) Thickness Length Diameter 1,000kg 330mm 10-18mm 210-570mm 100-158mm 36kg Made

More information

BX7322 Adventurer Tow Bar Operator Manual & Installation Instructions

BX7322 Adventurer Tow Bar Operator Manual & Installation Instructions Please visit www.blueox.com for the latest version of these installation instructions. BX7322 Operator Manual & Installation Instructions Serial Number (5,000 lb) 2 Inch Coupler 292-1263 Rev J Page 1 of

More information

COOKSON OWNER'S MANUAL

COOKSON OWNER'S MANUAL COOKSON OWNER'S MANUAL FDO-A10 INDUSTRIAL DUTY FIRE DOOR OPERATOR R L I S T E D 3040233 US CONTROL PANEL SERIAL# OPERATOR SERIAL# 9001.DWG ECN 0959 REV 4 SPECIFICATIONS MOTOR TYPE:...INTERMITTENT HORSEPOWER:...1/8

More information

Dupont Circle Station - Escalator A03S01 (South Entrance) Assessment Checklist

Dupont Circle Station - Escalator A03S01 (South Entrance) Assessment Checklist Dupont Circle Station - Escalator A03S01 (South Entrance) Assessment Checklist 143 Dupont Circle Station - Escalator A03S02 (South Entrance) Dupont Circle Station Escalator A03S02 (South Entrance) Escalator

More information

OPERATOR MANUAL Combo Belt Conveyor

OPERATOR MANUAL Combo Belt Conveyor 1 OPERATOR MANUAL Combo Belt Conveyor Document No. 11-01, Rev., 0816 2 WARNINGS THIS CONVEYOR IS DESIGNED FOR A SPECIFIC APPLICATION. CHECK FRAME AND METAL BELT FOR DAMAGE DURING SHIPMENT. READ THE MANUAL

More information

BX7322 Adventurer Tow Bar Operator Manual & Installation Instructions

BX7322 Adventurer Tow Bar Operator Manual & Installation Instructions Please visit www.blueox.com for the latest version of these installation instructions. BX7322 Operator Manual & Installation Instructions Serial Number (5,000 lb) 2 Inch Coupler 292-1263 Rev J Page 1 of

More information

Assortment 2013_FPT BOOK.indb /02/13 6:57 PM

Assortment 2013_FPT BOOK.indb /02/13 6:57 PM Assortment Contents Why compete against your supplier when you can be our partner Chain Tensioners...14 see Chains section for details Anti-Vibration Mounts...224 Key Steel...225 Motor Rails...226 Self

More information

Felco Industries, Ltd Grant Creek Road P.O. Box Missoula, Montana (406) Fax (406)

Felco Industries, Ltd Grant Creek Road P.O. Box Missoula, Montana (406) Fax (406) Bedding Conveyor - Model 60 Serial Number Bedding Conveyor Patent Number: 4,462,747 Felco Industries, Ltd. 3660 Grant Creek Road P.O. Box 16750 Missoula, Montana 59808-6750 (406) 728-9103 1-800-221-5427

More information

Maintenance manual XT modules

Maintenance manual XT modules Maintenance manual XT modules Copyright FlexLink 2013 The contents of this publication are the publishers and may not be reproduced (even extracts) unless permission is granted. Every care has been taken

More information

Conveyor Layouts 1-1 SECTION 1 OVERVIEW 1-1. Conveyor Manuals 1-1 Using this Manual 1-2. New Construction 1-1 Extensions or Modifications 1-1

Conveyor Layouts 1-1 SECTION 1 OVERVIEW 1-1. Conveyor Manuals 1-1 Using this Manual 1-2. New Construction 1-1 Extensions or Modifications 1-1 SECTION 1 OVERVIEW 1-1 Conveyor Layouts 1-1 New Construction 1-1 Extensions or Modifications 1-1 Conveyor Manuals 1-1 Using this Manual 1-2 Component Details Section 1-2 Assembly and Installation Section

More information

Belt Conveyor Systems

Belt Conveyor Systems Belt Conveyor Systems Product Manual 36 and 48 Widths Release 111114 i 11/2011 SECTION 1 OVERVIEW... 1-1 System Length... 1-1 Component Dimensions... 1-2 Calculating Floor Support Heights... 1-3 Recommended

More information

PO Box 645, Stockton, Missouri, FAX superiorgearbox.com

PO Box 645, Stockton, Missouri, FAX superiorgearbox.com I000-7000-D0447-A 4/7/05 1 SAFETY PRECAUTIONS CAUTION Please read this entire document prior to operating the gear drive. Gear drive failure and / or injury to operators may be caused by improper installation,

More information

Power Transmission Belt Drive System Installation, Maintenance and Troubleshooting Guide

Power Transmission Belt Drive System Installation, Maintenance and Troubleshooting Guide Power Transmission Drive System Installation, Maintenance and Troubleshooting Guide www.contitech.us Table of Contents Installation Guide 2 Table of Contents Installation V-s V-s 3 Banded s Torque Team

More information

Sisu S-Cam Drum Brakes

Sisu S-Cam Drum Brakes Sisu S-Cam Drum Brakes (For hub reduction rear axles since 1992) Maintenance Manual Sisu Axles, Inc. Autotehtaantie 1 P.O. Box 189 FIN-13101 Hämeenlinna Finland Phone int + 358 204 55 2999 Fax int + 358

More information

Timing Belt Design Hints A guide to Timing Belt drives

Timing Belt Design Hints A guide to Timing Belt drives Timing Belt Design Hints A guide to Timing Belt drives Properties This table is provided to assist in specifying an Optibelt drive element for a particular drive application. Ambient temperature Maximum/minimum

More information