Progress for masters of the construction site! Mining and tunnelling
|
|
|
- Alfred Hicks
- 5 years ago
- Views:
Transcription
1 Progress for masters of the construction site! Mining and tunnelling
2 CONTENTS 7 Tool range Page Round shank cutter bits Shank system Ø 14mm / 0,55 8 Round shank cutter bits Shank system Ø 19,4mm / 0, Round shank cutter bits Shank system Ø 22mm / 0,86 10 Round shank cutter bits Shank system Ø 25mm / Round shank cutter bits Shank system Ø 30mm / 1, Round shank cutter bits Shank system Ø 35mm / 1, Round shank cutter bits Shank system Ø 38 / 30mm - 1,5 / 1, Round shank cutter bits Special shank systems Round shank cutter bits Shank system Ø 38mm Krummenauer 29 Round shank cutter bits Shank system Ø 43 / 35mm - 1,7 / 1, Radial pic, Wing bit 33 Microtunnelling Tools for TBM 36 Wear protection 38 Request form / Order form 39 Below the pictures of tools on the following pages you will find the following information: Dimensions: mm / inches Art-No Description Packaging unit Welding instructions see: SUPPORT: Germany : mining@betek.de USA : mining-usa@betek.de Tel.: +49 (0) /
3 8 Shank system Ø 14mm / 0,55 16 / 0,61 14,1 / 0,56 25,7 / 1,01 29,2 / 1,15 16 / 0,63 55,1 / 2,17 25 / 0,98 51 / 2,01 7 / 0,28 19 / 0, / 0,55 14 / 0,55 SR90 25 / 0,98 25 / 0,98 41 / 1,61 BM BM4-14 / TS BM BM7-14 / 2F BHR B14TS Shank system Ø 19,4mm / 0,76 16 / 0,61 15 / 0, / 3, / 4, / 3,94 46 / 1,81 13,3 / 0,52 50 / 1,97 46 / 1,81 24 / 0,94 38 / 1,50 19,4 / 0,76 38 / 1,50 7 / 0,28 19,4 / 0,76 38 / 1,50 19,4 / 0,76 SI36 BC26 40 B3KS BSR63 20 BG20F BC68 40 BG20F
4 9 Shank system Ø 19,4mm / 0,76 8 / 0,31 12 / 0,46 46 / 1,81 16,4 / 0,65 86,3 / 3,40 45,5 / 1,79 19 / 0,75 86,6 / 3,41 19,4 / 0,76 19,4 / 0,76 27 / 1,06 38 / 1,50 BSK19 50 B1K8-K BSK21 50 B1-12 / 38-K Shank system Ø 19,4mm / 0,76 19,8 / 0,78 29,7 / 1,17 SI36 42 / 1,65 45 / 1, ,2 / 1,94 BZ33 Assembly tool BZ31 Disassembly tool BHR DV12 / 2
5 10 Shank system Ø 22mm / 0,87 12 / 0,46 16 / 0,61 22,5 / 0,89 54,2 / 2,13 98,5 / 3,88 102,5 / 4,04 42 / 1,65 19 / 0,75 46 / 1,81 13,3 / 0,52 46 / 1, / 1,65 38 / 1,50 38 / 1,50 85 / 3,35 BC36 40 B1-12 / 22 / SI26 BC33 40 B3KS22 BHR120OL 20 B22S Shank system Ø 22mm / 0,87 16 / 0,61 22,5 / 0,89 43,2 / 1,70 42 / 1,65 87 / 3,43 45 / 1,77 13,3 / 0,52 45,5 / 1,79 45 SI26 38 / 1,50 57 / 2,24 BZ41 BZ32 BC58 50 BHR Assembly tool Disassembly tool B3S / 22-K DV8 / 22-K
6 12 / 0,46 15 / 0,58 15 / 0,58 19 / 0, / 2,52 24 / 0,94 / / 11 Shank system Ø 25mm / 1 0,94 25 / 0,98 44 / 1,73 141,5 / 5,57 BTK BTK BTK BG25F BG25F BG25F SI79 / K 17,4 / 0,69 25 / 0,98 17,4 / 0,69 24 / 0,94 64 / ,4 / 0,69 0, / 2,99 26 / 1,02 BTK BG25F / 1,73 BTK BG25F BTK BG25F BTK ,3 / 0,96 7 / 0,28 BG25F A 18,7 / 0,74 51 / 2, / 1,50 BTK BG25F BSR78 15 BG25F
7 12 Shank system Ø 25mm / 1 17,2 / 0,68 15 / 0,58 12 / 0, / 5, / 5,36 133,5 / 5,26 70 / 2,76 16 / 0,63 70 / 2,76 24 / 0,94 68 / 2,68 21,7 / 0,85 38 / 1,50 25 / 0,98 38 / 1,50 25 / 0,98 43 / 1,69 25 / 0,98 BTK BG25HP BTK BG25HP BTK53 20 B40K12 17,2 / 0,68 22 / 0,85 133,5 / 5,26 128,5 / 5,06 68 / 2,68 16 / 0,63 63 / 2,48 20,5 / 0,81 43 / 1,69 25 / 0,98 43 / 1,69 25 / 0,98 SI184 BTK BG25P BTK BG25P
8 13 Shank system Ø 25mm / 1 16 / 0,61 9,1 / 0,36 12 / 0,46 18,5 / 0,73 61 / 2,40 19 / 0,75 70 / 2,76 13,3 / 0,52 33 / 1,30 33 / 1,30 140,7 / 5,54 BTK01 30 B40K9 BTK03 30 B40HDK12 25 / 0,98 44 / 1,73 BTK99 15 B40 / 3-LSK SI79 / K BZ37 BZ36 BZ43 BZ22 Assembly tool Disassembly tool Bit extractor Bit puller
9 14 Shank system Ø 25mm / 1 25,5 / 1,00 25,5 / 1,00 25,6 / 1,01 72,5 / 2,85 74 / 2,91 74 / 2,90 61 / 2, / 1,73 54 / 2,13 62,5 / 2, / 2,13 85 / 3,35 91 / 3,58 91 / 3,58 BHR31 15 DV25 BHR DV25KS BHR DV25TS 74 / 2,91 25,5 / 1,00 25, 5/100, / 2,64 85 / 3, / 3,97 23 / 0,91 71 / 2,80 63,5 / 2, / 3, / 5,20 BHR186 6 B BHR185 3 B B
10 15 Shank system Ø 30mm / 1,18 15 / 0,58 17,4 / 0,69 75 / 2,95 24 / 0,94 75 / 2,95 24 / 0,94 70 / 2,75 34 / 1,34 75 / 2,95 30 / 1, / 5,94 BGF25 10 BGF10 10 BGF11 10 BG30F B47GK17.5LK75-E/F B47GK22LK70-E/F SI35 / / 2,56 BGF09 10 B47GK22LK75/65 9,1 / 0, / 5,51 30 / 1,17 BSR58 8 BG30F
11 16 Shank system Ø 30mm / 1,18 11 / 0,43 12 / 0,46 15 / 0,58 84,3 / 3,32 84 / 3,31 87 / 3,43 22 / 0,87 21,7 / 0,85 24 / 0,94 50,8 / 2,00 50 / 1, / 6,42 BGF14 15 BG30P BGF21 15 BG30P A SI / 1,97 17,2 / 0,68 17,2 / 0,68 22 / 0,85 84 / 3,31 16 / 0,63 84 / 3,31 16 / 0,63 84 / 3,31 20,5 / 0,81 BGF22 15 BG30P / 1,97 50,8 / 2,00 50 / 1,97 BGF19 15 BG30P A BGF17 15 BG30P BGF26 15 BG30P
12 17 Shank system Ø 30mm / 1,18 82mm shank 12 / 0,46 17,4 / 0,69 77 / 3,03 21,7 / 0,85 77 / 3,03 28,5 / 1,12 34 / 1,34 77 / 3,03 34 / 1,34 48 / 1,89 52 / 2,05 (159 / 6,26) BGK06 15 BGK86 10 BGK / 3,23 B47GK12LK77-K B47GK17.5LK77-KE B47GK22-K BGK90 10 BG30K Shank system Ø 30mm / 1,18 76mm shank 15 / 0,58 22 / 0,85 70 / 2,76 24,3 / 0,96 18,7 / 0,74 87 / 3,43 24 / 0,94 87 / 3,42 20 / 0,78 50 / 1,97 50 / 1,97 (163 / 6,41) BGK91 15 BGK / 2,99 BG30K P BG30K / 1,97 BGK89 15 BG30K
13 18 Shank system Ø 30mm / 1,18 12 / 0,46 15 / 0,58 17,4 / 0,69 17,4 / 0,69 86 / 3,39 21,7 / 0,85 80 / 3,15 24 / 0,94 28,5 / 1,12 75 / 2,95 24 / 0,94 50 / 1,97 54 / 2,13 50 / 1, / 5,94 BGS BG30W BGS95 10 B47GK15LK80 BGS BG30W SR83 BGS89 10 B47GK17.5LK75-E 17,4 / 0,69 75 / 2,95 24 / 0,94 29,4 / 1,16 75 / 2,95 55 / 2,17 BGS80 10 BGS88 10 BGS84 10 BGS B47GK17.5LK75 B47GK19 / 70-E B47GK19 / 70-P BG30W / 0,98 70 / 2,75 34 / 1,34 70 / 2,76 34 / 1,34 70 / 2,75 35 / 1,38 77 / 3,03 27,5 / 1,08 BGS90 10 BGS93 10 BGS16 10 BGS B47GK22LK70-E B47GK22LK70 / 70 B47GK25LK70 / 70 BG30W
14 19 Shank system Ø 30mm / 1,18 30,4 / 1,20 30,4 / 1,20 78 / 3,06 72 / 2,84 65 / 2,56 65 / 2, ,5 / 2,62 66 / 2, / 4, / 3,93 BHR35 5 B30.65 BHR94 5 B43G 80,7 / 3,18 30,4 / 1,20 30,4 /1,20 65 / 2, / 4, / 1, / 3,15 77 / 3, / 3, / 4, / 5,24 BHR75 5 B30.65H BHR183 1 B B SI35 / 22 BZ39 Wedge puller BZ35 Assembly tool BZ34 Disassembly tool
15 20 Shank system Ø 35mm / 1,38 Gauge 89mm / 3,5 89 / 3,50 72 / 2,83 35,1 / 1, / 7, / 4,69 72,5 / 2,85 95 / 3,74 55 / 2,17 34,7 / 1,37 50 / 1,96 BSR BG35H A BR71 10 BR Shank system Ø 35mm / 1,38 Gauge 89mm / 3,5 183 / 7, / 7,20 89 / 3,50 89 / 3,50 27,5 / 1,08 34,7 / 1,37 34,7 / 1,37 55 / 2,17 55 / 2,17 BSR BG35K BSR BG35K
16 21 Shank system Ø 35mm / 1,38 Gauge mm / 4 17,4 / 0, / 3, / 3,94 26 / 1,02 55 / 2,17 55 / 2, / 7,64 55 / 2,17 34,7 / 1,37 22 / 0, / 7,71 195,6 / 7, / 4,0 102 / 4,0 20 / 0, / 4,0 BSR BG35H BSR BG35H P BSR BG35H Shank system Ø 35mm / 1,38 Gauge mm / 4 34,7 / 1,37 50 / 1,97 34,7 / 1,37 55 / 2,17 BSR97 10 BG35K BSR BG35K BZ39 Wedge puller
17 22 Shank system Ø 38 / 30mm - 1,5 / 1,18 25 / 0,98 75 / 2,95 75 / 2,95 34 / 1, / 5,94 24,3 / 0,96 24,3 / 0,96 18,7 / 0,74 38 / 1,5 70 / 2,76 77 / 3,03 77 / 3,03 35 / 1,38 BKF15 10 B47K19 / 70-F 18,7 / 0,74 BKF10 10 B47K25-F BKF17 8 B47K22 / 70-F BKF13 10 B47K24LK70-FE BKF16 8 B47K24 / 70-F 64 / 2,51 142,4 / 5,60 30 / 1,17 37 / 1,46 9,1 / 0,36 SI 35 / 22 BZ35 Assembly tool BZ34 Disassembly tool BSR BS37F
18 23 Shank system Ø 38 / 30mm - 1,5 / 1,18 12 / 0,46 12 / 0,46 88 / 3,46 21,7 / 0,85 12 / 0,46 21,7 / 0,85 77 / 3,03 21,7 / 0,85 17,4 / 0,69 24 / 0,94 48 / 1,89 50 / 1,97 50 / 1, / 5,51 BKS16 10 B46K12LK90 BKS BS38W BKS BS38W SR83 38 / 1,5 50 / 1,97 BKS / 1,34 34 / 1,34 BS38W / 1,97 50 / 1,97 50 / 1,97 BKS BS38W BKS BS38W BKS156 / P 10 BS38W P
19 24 Shank system Ø 38 / 30mm - 1,5 / 1,18 17,4 / 0,69 90 / 3,54 35 / 1,38 25 / 0,98 77 / 3,03 25 / 0, / 6,02 BKS BKS W49K17 / S BS38W SR83 30 / 1,17 38 / 1,49 72 / 2,83 38,3 / 1,51 BKS BS38W / 1,50 63,5 / 2, ,3 / 1,19 66 / 2, / 3,93 BHR38 10 B43H
20 25 Shank system Ø 38mm / 1,5 147,2 / 5, / 5,77 70 / 2,76 80 / 3,14 30 / 1,18 38 / 1,50 58 / 2,28 38 / 1,50 BSR BG38H BSR196 8 BG38H Shank system Ø 38mm / 1,5 17,4 / 0,69 24 / 0,94 70 / 2,76 70 / 2,76 70 / 2,76 30 / 1,18 55 / 2, / 5,79 38 / 1,50 25 / 0,98 25 / 0,98 80 / 3, / 1,18 70 / 2,76 30 / 1,18 70 / 2,76 30 / 1,18 80 / 3,15 35 / 1,38 77 / 3, 03 BSR94 10 BSR BSR BG38K BG38K BG38K P BSR BG38K / 2,56 BSR125 8 BSR133 8 BSR BSR BG38K A BG38K BG38K BG38K
21 94,5 / 3,72 80 / 3,15 80 / 3,15 80 / 3,15 80 / 3,15 34 / 1,34 34 / 1,34 34 / 1,34 58 / 2,28 58 / 2, / 6,18 80 / 3,15 34 / 1,34 30 / 1,18 25 / 0,98 25 / 0, / 1,38 80 / 3,15 40 / 1,57 / / 26 Shank system Ø 38mm / 1,5 Holder length 65mm / 2,6 BSR174 8 BSR180 8 BSR140 8 BG38W A BG38W PA BG38W SR65 / / 1,5 BSR199 8 BG38W AP 3,15 35 / 1,38 3,15 80 / 3,15 80 / 3,15 80 / 3,15 BSR198 6 BSR200 8 BSR201 6 BSR197 6 BG38W A BG38W P BG38W A BG38W A 38,3 / 1,51 86 / 3,39 65,5 / 2, ,5 / 5,06 BHR169 3 B38H
22 25 / 0,98 80 / / 3,15 84 / 3,30 80 / 3,15 30 / 1,18 30 / 1,18 34 / 1,34 35 / 1,38, 27 Shank system Ø 38 mm / 1,5 Holder length 75 mm / 3,0 65 / 2,56 65 / 2,56 68 / 2, / 6,50 BSR114 8 BSR131 8 BSR05 8 BG38W A BG38W P BG38W SR65 / / 1,5 65 / 2,56 BSR BG38W A
23 28 Special shank systems 17,4 / 0,69 13 / 0,50 22 / 0,85 16 / 0,61 174,5 / 6,87 75 / 2,95 13,7 / 0, / 8, / 8,31 255,5 / 10,06 97 / 3,82 25 / 0,98 97 / 3,82 20 / 0, / 4,72 28,5 / 1,12 38 / 1,5 54 / 2,13 38 / 1,5 54 / 2,13 50,8 / 2,00 80 / 3,15 BKF14 8 B47K13LK97L BKF23 8 BS38F BSR109 5 BG51S / 0, / 10,28 165,5 / 6,52 66 / 2,60 30 / 1,18 99 / 3,90 20 / 0,78 38 / 1,50 52 / 2,05 38 / 1,50 55 / 2,17 SI181 34,7 / 1,37 55 / 2,17 BLK10 10 B46K2L BLK12 10 BS38K BSR153 5 BG35X
24 29 Shank system Ø 38mm / 1,5 Krummenauer 17,4 / 0,69 90 / 3,54 17,4 / 0,69 28 / 1, / 4,33 28,5 / 1, / 3, / 4,33 34 / 1, / 8,54 BKR27 8 BKR07 8 BKR25 8 BG38X BKR17.5LK110/S38 BKR19LK100/S38-P 38 / 1,5 65 / 2,56 BKR29 6 BG38X P Shank system Ø 40mm / 1,58 Krummenauer 130 / 5, / 5, / 5,12 34 / 1,34 252,7 / 9,95 BKR26 5 BKR19LK130 / 64 / 2 BKR24 5 BKR19LK130 / 64P 40 / 1,58 BKR28 6 BG40X P
25 30 Shank system Ø 43 / 35mm - 1,70 / 1,38 Gauge 102mm / 4,0 102 / 4, / 4,02 27,5 / 1,08 67 / 2,64 BSR204 6 BS43H H 234 / 9,21 34,7 / 1,37 43,3 / 1,70 67 / 2,64 BSR181 6 BS43H A Shank system Ø 43 / 35mm - 1,70 / 1,38 Gauge 114mm / 4,5 17,4 / 0, / 4, / 4, / 4, / 4,49 30 / 1,18 26 / 1,02 32 / 1,26 67 / 2,64 BSR178 5 BS43H P 67 / 2,64 BSR191 5 BS43H A 67 / 2,64 BSR206 5 BS43H P 246 / 9,69 24,3 / 0, / 4,49 18,7 / 0, / 4,49 27,5 / 1,08 34,7 / 1,37 43,3 / 1,70 67 / 2,64 67 / 2,64 67 / 2,64 BSR182 5 BS43H BSR205 5 BS43H BSR203 5 BS43H
26 31 Shank system Ø 43 / 35mm - 1,70 / 1,38 57,1 / 2,25 G1/4" 128 / 5, / 3,94 77,5 / 3,05 92 / 3,62 43,6 / 1,72 50,8 / 2, / 2, / 5,47 74,6 / 2,94 67 / 2,64 112,2 / 4,42 35 / 1,38 57 / 2,24 182,5 / 7,19 BHR159 1 B300 BR74 5 BR / 3,82 43,6 / 1, / 4,25 43,6 / 1, / ,1 / 3,74,, 66 / 2, / ,7 / 3,14,, 73,2 / 2,88 35,2 / 1,38 57 / 2,24 35,2 / 1,39 57 / 2,24 BR77 5 BR / P BR79 4 BR BZ40 Wedge puller
27 33 Radial pic 18 / 0,71 11 / 0,43 23 / 0,91,, 11 5/ / 0, / 5,39 67 / 2, / 5,08 59 / 2,32 20 / 0,79 41,4 / 1, / 3,93 25,8 / 1,02 41,4 / 1,63 93 / 3,67 25,6 / 1,01 BF33 10 BF137x41.4x25.8 BF39 15 BF129x93x26 15 / 0,59 25 / 0,98 15 / 0,59 25 / 0, / 5,08 22 / 0,87 17 / 0,67 99 / 3,90 22 / 0,87 17 / 0, / 9,06 50 / 1, / 5,39 30,6 / 1,20 50 / 1, / 5,39 35 / 1,38 21,5 / 0,85 41 / 1,61 71 / 2, / 7,87 30,6 / 1,20 BF38 5 BF230x137x30.6 BF45 5 BF200x137x30.6 Wing bit BD BD71-35
28 20 / 0,79 60 / 2,36 38 / 1,50 61 / 2,40 32,5 / 1, ,4 / 1, /, /, 34 Microtunnelling 15 / 0,59 33,5 / 1,32 BFZ35M 25 BFZ38 / M BFZ51 20 BFZ51 60 / 2,36 81 / 3,19 12 / 0,46 11 / 0,43 15 / 0,59 33,5 / 1,32 56,5 / 2,22 50 / 1,97 38 / 1,50 28 / 1,11 60 / 2,36 BFZ BFZ56 BFM08 15 BFM112x50 / S
29 35 Microtunnelling 15 / 0,59 35 / 1,38 15 / 0,59 49,6 / 1, / 5,67 15 / 0,59 53 / 2,09 126/4, / 7,21 99 / 3,90 70 / 2,76 86,5 / 3,41 87,2 / 3, / 5,67 86,4 / 3,40 70 / 2,76 BFM07 5 BFM144x70 BFM16 5 BFM144x86x70 15 / 0,59 49,6 / 1, / 5,67 70 / 2,76 BFM70 5 BFM144x86x70 / 1 BFM71 BFM183x126x100
30 36 Tools for TBM 99 / 3, / 4,53 60 / 2, / 5, / 5, / 3, / 7,48 75 / 2, / 8, / 5, / 8, / 5,63 60 / 2, / 5,24 60 / 2,36 60 / 2,36 BFZ280 BFZ275 BFZ220x115 BFZ222,5x / 3, / 8, / 4,45 79,7 / 3,14 30 / 1, / 5,95 44,7 / 1,76 BFZ303 BFM77 BFZ216x151x100 BFM168x132 / B / 4, / 4, / 6, / 6,10 80 / 3,15 80 / 3,15 BRS13 BRS14 BRS155x110x80 / R BRS155x110x80 / L
31 38 Wear protection / TungStuds TC h2 h1 h 1 : height before welding h 2 : height after welding More info see: BTS01 Ø: 16mm h 1 : 16mm h 2 : 11-12mm TC: Ø7 x 8,4mm BTS02 Ø: 16mm h 1 : 19mm h 2 : 14-15mm TC: Ø7 x 11,4mm BTS03 Ø: 19mm h 1 : 16mm h 2 : 10,5-11,5mm TC: Ø9 x 8,4mm h2 h1 BTS04 BTS05 BTS06 BTS07 Ø: 19mm h 1 : 19mm h 2 : 13,5-14,5mm TC: Ø9 x 12mm Ø: 22mm h 1 : 16mm h 2 : 10-11mm TC: Ø12,6 x 8,4mm Ø: 22mm h 1 : 19mm h 2 : 13-14mm TC: Ø12,6 x 12mm Ø: 22mm h 1 : 22mm h 2 : 16-17mm TC: Ø12,6 x 14mm
32 39 Request form Order form Invoice address BETEK Bergbau- und Hartmetalltechnik Karl-Heinz Simon GmbH & Co. KG Sulgener Str D Aichhalden Tel + 49 (0) / Fax + 49 (0) / info@betek.de USA mining-usa@betek.de Delivery address (if different to Invoice address) Truck Sea freight Air freight Art-No Description Quantity Price / Item Date / signature
33 BETEK GmbH Edition Subject to technical modifications Atelier Türke US GB BETEK GmbH & Co. KG Sulgener Str D Aichhalden Germany Service hotline + 49 (0) / Service fax line + 49 (0) / mining@betek.de Sales partner
Get-A-Quote on Your Bell & Gossett e-1510 Pump
Get-A-Quote on Your Bell & Gossett e- e- Identification Guide Need a New e- Series? Need it ped Fast? In Bell & Gossett upgraded the old pump to the new e pump. Changes include the re-design of the volute
Bell & Gossett Series 1510 Centrifugal Pumps
Learn How To Repair On-Line: the www.statesupply.com Bell Gossett 50 Series Email: s Sales@StateSupply.com Bell & Gossett Series 50 Centrifugal s Great Pricing on 50 s! s in Two-Days or Less! 50 Dimension
TM ETRS-TM35FIN-ETRS89 WTG
Noise calculation model: ISO 9613-2 General Wind speed: 8,0 m/s Ground attenuation: General, Ground factor: 0,4 Meteorological coefficient, C0: 0,0 db Type of demand in calculation: 1: WTG noise is compared
CUSTOM ADD-ONS FOR ENGLISH UNITS
Spindles Flange Piloted Slot Collet Jacobs Taper Morse Taper See note on next page for location in the Specification Code No. Description A B C AA Flange 2.625 3.619/3.621 5.313 AB Piloted Slot 2.3125
Combined pump and gripper Medium
VGS 3010 H D W Dimension and connection W D H Feed pressure Vacuum Exhaust/blow mm mm mm 1 Housing VGS3010 23 30 Ø6 mm, 3x G1/8", M5 2 COAX cartridge 2:1 No COAX cartridge 65 2:2 COAX cartridge 2-stage
Issue/Rev. 0.3 (2/04) Bulletin P
Form No. P0906.03 E-Type Transmitter Parts List Issue/Rev. 0.3 (2/04) Bulletin P0906.03 (Previous Design) Switch and Network Assembly The Switch and Network Assembly is no longer available. To replace
Partner for Change : Appendix A
11/8/217 Partner for Change - 218: Appendix A Practice Greenhealth Awards Probo.CI CEC_HOSPITAL no.35321 Partner for Change - 218: Appendix A Introduction Completion of Appendix A mandatory. Please indicate
List of system parts and belonging Descriptive Documents
DeltaV Scalable Process System includes the following system parts: Item Model Name Type Technical Data 1. KL1601X1-BA1 I/O Port (IOP) 2. KL2101X1-BA1 CHARM I/O Card (CIOC) 3. KL2102X1-BA1 Wireless I/O
Cutting Tool. NEW SUPER DRILL (Standard Head Type) BLADE (For Standard Head) NEW SUPER DRILL SET (Flat Head Type) BLADE (For Flat Head)
1,166 167 168,169 170 170 173 173 174 174 174 NEW SUPER DRILL (Standard Head Type) BLADE (For Standard Head) NEW SUPER DRILL SET (Flat Head Type) BLADE (For Flat Head) EXTENTION ARBOR (For Standard Head)
Drive, Fuse & Circuit Breaker Ratings
Fuses 1, Fuse & Breaker s The tables on the following pages provide drive ratings (including continuous, 1 minute and 3 second) and recommended AC line input fuse and circuit breaker information. Both
Vacuum Automation 2.1. The future depends on good product choices
Vacuum Automation 2.1 The future depends on good product choices Combined pump and gripper 432 433 Combined pump and gripper Introduction...434 Small...436 Medium...438 Large...452 Accessories...455 434
INLINE FEMALE UPDATE ENTERTAINMENT DIVISION - SYNTAX - Via Asti 84/A Rivoli (Turin) - ITALY
INLINE FEMALE The new SYNTAX SVK audio series has been conceived and manufactured to set a higher standard for studio applications. Its IP67 waterproof rating makes it perfectly suitable also for outdoor
The Product Range. Technical Data
The Product Range Section 3.1 - Basic Cylinder Bore sizes (mm): 10, 16, 25, 32, 40, 50 The basic cylinder series satisfies the support and guidance requirements of a great diversity of applications. Various
Table 1d - FSA for All Returns, Females Tax Year
PR 10 Newfoundland and Labrador A0A 20,250 597,345 1,920 1,720 2,580 3,150 1,960 1,610 1,360 1,030 1,020 740 550 460 630 470 410 290 290 70 20 A0B 8,850 249,804 780 740 1,200 1,520 1,010 790 540 430 370
Temperature Measurement Resistance thermometers
Temperature transmitters for mounting in the connection head The following temperature transmitters are available for mounting in the connection head: SITRANS TH100 Programmable two-wire temperature transmitter
1. COVER COMP CYLINDER HEAD
CONTENTS FIG. 1 COVER COMP CYLINDER HEAD FIG. 2 CAMSHAFT COMP FIG. 3 HOLDER CAMSHAFT COMP FIG. 4 CYLINDER HEAD COMP FIG. 5 CARBURETOR FIG. 6 AIR CLEANER FIG. 7 LEFT CRANKCASE COVER FIG. 8 DRIVE PULLEY
Installation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual 6100 Series Industrial Center Drive Conveyors Table of Contents Warnings General Safety......................... 2 Introduction....................................
2200 Series Center Drive Conveyors
2200 Series Center Drive Conveyors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 20 975 Cottonwood Ave. TEL: 1-800-397-8664 TEL: 262-367-7600 Hartland,
B&G Series e-60 Cast Iron Circulating Pumps
Toll Free: 800.772.2099 Order Online: Fax: 651.774.7156 Sales@StateSupply.com B&G Series e-60 Cast Iron Circulating s Please visit StateSupply.com to view pump related detailed capacity curves. Upgraded
Push Button Units and Indicator Lights
3SB3, Inscriptions, 22 mm Insert labels Push Button Units and Indicator Lights Push buttons (clear) and illuminated push buttons with a flat button can be fitted with insert labels for identification purposes,
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Sub-base non plug-in 4 6 Air return Manual operator Solenoid 4-way pilot with balanced poppet Bonded spool 2 7 8 2 67
Push buttons and Visual indicators
Push buttons and Visual indicators Catalogue PDE2587TCUK December 2014 WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH,
TM HR HAND RECEIPT MANUAL
HAND RECEIPT MANUAL COVERING THE END ltem/components OF END ITEM (COEI), BASIC ISSUE ITEMS (Bll), AND ADDITIONAL AUTHORIZATION LIST (ML) RELATED TO TRUCK, 5-TON, 6x6, M809 SERIES (DIESEL): CHASSIS, M809,
DeZURIK G-SERIES MANUAL ACTUATOR USED ON BOS BUTTERFLY VALVES
G-SERIES MANUAL ACTUATOR USED ON BOS BUTTERFLY VALVES Instruction D10465 August 2012 Instructions These instructions provide information about G-Series Manual Actuators. They are for use by personnel who
SPARE CONNECTORS 2008
SPARE PARTS MANUAL ART.NO.: 3208201 ENGLISH INDEX SPARE CONNECTORS AA-AR SPARE CONNECTORS AS-BK SPARE CONNECTORS BL-BZ SPARE CONNECTORS CA-CP 1x 2x 3x 4x SPARE CONNECTORS CQ-DM SPARE CONNECTORS DN-EL
502A24M 4/90 Supersedes 502,137M
ELECTRIC KITS AND UNITS ACCESSORIES _pu Lithe echnica blication U.S.A. :c' 1990 Lennox industries inc. Dallas, Texas, USA 502A24M 4/90 Supersedes 502,137M REPLACEMENT ELEMENT ELECTRIC PACKAGES INSTALLATION
SA SyStem. NeW. Part-off and grooving system for radial grooving. high positive inserts for aluminium self-clamping blades.
SA SyStem Part-off and grooving system for radial grooving NeW high positive inserts for aluminium self-clamping blades www.arno.de 01/2013 Content Content SA-Monoblock holder... Page 4 9 SA-Blades...
3200 Series End Drive Flat and Cleated Belt Conveyors
00 Series End Drive Flat and Cleated Belt Conveyors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 0 975 Cottonwood Ave. TEL: -800-97-8664 TEL: 6-67-7600
FedEx Express Rates. Effective Sept. 15, 2008
FedEx Express Rates Effective Sept. 15, 2008 Table of Contents FedEx Express Intra-Canada Rates 2 Postal Code Index 3 FedEx First Overnight 4 FedEx Intra-Canada Index 12 FedEx Priority Overnight 14 FedEx
Installation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual 00 Series Center Drive Conveyors Table of Contents Warnings General Safety........................... Introduction....................................... Product
Florida Dept. of State Summary Data 2016 Overvote-Undervote Report
Florida Dept. of State Summary Data 6 Overvote-Undervote Report 5 6 9 5 6 9 5 6 9 5 6 9 5 6 9 5 5 5 5 5 A B C D E F G H 6 GENERAL ELECTION REPORT ON OVERVOTES AND UNDERVOTES Tabulation Device County EV
Homepage > Products > Control units > VARYCONTROL > Secondary silencer > Type TX. Type TX
Homepage > Products > Control units > VARYCONTROL > Secondary silencer > Type TX Type TX FOR THE REDUCTION OF AIR-REGENERATED NOISE OF AIR TERMINAL UNITS TYPE TVJ, OR EN Rectangular secondary silencers
Push-Buttons and Visual indicators. Catalogue PD0C00018UK02-ev
Push-Buttons and Visual indicators Catalogue PD0C00018UK02-ev WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL
SELECTION LIST REVISION This book contains the following models: Chevy/GMC Dodge Ford
SELECTION LIST ---------- REVISION 0 ---------- This book contains the following models: 1973-2002 Chevy/GMC 1994-2002 Dodge 1980-2002 Ford Form #64135-120102 WESTERN PRODUCTS P.O. BOX 245038 MILWAUKEE,
AUTUMN 2013 TIME SCHEDULE
AUTUMN 2013 TIME SCHEDULE Instructor 110 A LC 3 M W F 830-920 195 L EEB 105 CRAIG 11903 11904 AA QZ T 930-1020 25 L MUS 219 11905 # AB QZ T 1030-1120 25 L DEN 213 11906 AC QZ T 1230-120 25 L SMI 107 11907
Parts List, Wiring Diagrams
Parts List, Wiring Diagrams PAS180-300 SERIES PACKAGE GAS ELECTRIC UNITS TABLE OF CONTENTS PARTS LIST----------- 2-16 PARTS DRAWING - - - - - 17-28 WIRING DIAGRAMS - - - 29-52 Printed in U.S.A. 5/22/08
SST-90 LED Binning and Labeling
SST-90 LED Binning and Labeling Introduction This document describes the binning and labeling nomenclature for PhlatLight LED products as well as the orderable bin kits for each part. With each build of
8WH6 ipo Installation Terminals
/2 Introduction /4 8WH through-type terminals /6 8WH through-type screw terminals /8 8WH N-conductor isolating terminals /10 8WH N-conductor isolating screw terminals /12 8WH installation terminals More
SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices. Orifice plate with annular chambers. 4/358 Siemens FI
Application Dimensional drawings Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -60 to +550 C. Design Two support rings with replaceable orifice disk
REV: 000. Super Seca Flash Cure Units
REV: 000 Super Seca Flash Cure Units Table Of Contents Introduction 2 Standard Operating Guide 2 Features & Specs 2 External Layout 4-15 Internal Layout 16-24 Plug Guide 25 Wiring Diagrams 26-28 F.A.Q.
Air Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices S T C. Tel:
Air Cylinders Precision Engineered Fine Quality Excellent Prices Advanced Design connects fluid power to industrial automation Tel: 650-856 8833 www.stcvalve.com H1 83 Contents Air Cylinder Numbering System
MCC omponents Itasca Street Chatsworth
omponents 21201 Itasca Street Chatsworth!"# $%!"# SMBJ5.0 THRU SMBJ170CA Features For surface mount applications in order to optimize board space Low profile package Fast response time: typical less than
PCD & CBN TANGENTIAL MILLING
& TANGENTIAL MILLING CONTENTS Highlights 4 Codifiy 6 Shell Type 7 Cylindrical Type 8 Monoblock Type 9 Inserts 12 Adaptors 18 Setting Procedures 24 Spare Parts 26 Cutting Parameters 31 HIGHLIGHTS HIGHLIGHTS
AR35.30-D-4815H Remove and install drive pinion and ring gear with differential
AR35.30-D-4815H Remove and install drive pinion and ring gear with differential 8.5.09 REAR AXLE 741.412 /415 in MODEL 906.11 /21 /61 /71 /13 /23 /63 /73 REAR AXLE 741.413 /414 /416 /420 in MODEL 906.15
NEU NEW NOUVEAU NUEVO NIEUW NY
NEU NEW NOUVEAU NUEVO NIEUW NY RoseBox The future generation of Cassettes! Even more attractive, most versatile applications! Comprehensive range! The new rose plastic RoseBox range sets a completely new
MODEL H-2000-E HIGH PRESSURE PROPORTIONING UNIT. Parts Identification
55942-ID Issue 9 November 99 MODEL H-2000-E HIGH PRESSURE PROPORTIONING UNIT GUSMER EUROPE, S.A. A SUBSIDIARY OF THE GUSMER MACHINERY GROUP, INC. Rambla Torre de l Onclet, 7 Sector Industrial Masia d en
C R
Selection guide for feedthrough components Type mm Feedthrough capacitors I R V R C C R V µf B85121*C160 16 16 110... 440 B85121*250 B85121*E750 B85121*250 B85121*750 B85121*630, 101, 201 Feedthrough filters
Set-up, Operation & Maintenance Manual
Set-up, Operation & Maintenance Manual 2100 Series Center Drive Conveyors Table of Contents Warnings General Safety.................... 2 Introduction................................ 2 Product Description..........................
Technician's instructions. GENTLEpower LUX Contra-angle 25 LP - REF
Technician's instructions GENTLEpower LUX Contra-angle 25 LP - REF 1.001.2849 Distributed by: KaVo Dental GmbH Bismarckring 39 D-88400 Biberach Phone +49 (0) 7351 56-0 Fax +49 (0) 7351 56-1488 Manufacturer:
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Manual operator Solenoid Individual mounting Sub-base non Sub-base Manifold mounting Manifold base Sub-base/ manifold base non with latching solenoid
SMB5.0A(CA) - SMB440A(CA)
SMB5.0A(CA) - SMB440A(CA) SURFACE MOUNT TRANSIENT VOLAGE SUPPESSOR DIODE VOLTAGE RANGE: 5.0-440 V POWER: 600Wa t t s Features Mechanical Data Glass Passivated Die Construction Uni- and Bi-Directional Versions
Installation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual 3200 Series Flat Belt LPZ Conveyors Table of Contents Warnings General Safety........................... 2 Introduction....................................... 2
ROTARY SHAFT / OIL SEALS GASKETS LINER RINGS REPAIR KITS BONDED SEALS O RINGS. Automotive Seals VW BARNWELL THE SEAL OF APPROVAL
ROTARY SHAFT / OIL SEALS GASKETS LINER RINGS REPAIR KITS BONDED SEALS O RINGS Automotive Seals VW BARNWELL THE SEAL OF APPROVAL QUALITY AND SERVICE GUARANTEED Total Sealing Solutions Founded in 1972, M
Miniature Valves MH1. Extremely small, fast and versatile. Info 206
Miniature Valves MH1 Extremely small, fast and versatile Info 206 MH1 Miniature Valves Benefits and Applications of the MH1 Miniature Valve The MH1 offers maximum reliability, even in constant operation
INSTRUCTIONS FOR USING THE AUGERS
INSTRUCTIONS FOR USING THE AUGERS CONCERNED TO IMPROVE OUR PRODUCTS AND THE SAFETY OF PEOPLE, WE GIVE YOU SOME ADVICE AND RECOMMENDATIONS ON HOW TO USE THE AUGER. // DRILLING AND CORING TOOLS, ACCESSORIES
Ergonomic Solutions. 1 Catalog
Ergonomic Solutions www.3arm.net 1 Catalog Index 3 Arm is a division of the Tecnospiro Machine Tool Company located in Sant Joan de Vilatorrada a small village about 40 miles west of Barcelona. They are
SOFFIATORE ELIET. BL 450 versione 2 (dal ) ESPLOSO RICAMBI
SOFFIATORE ELIET BL 450 versione 2 (dal 01-02-2001) ESPLOSO RICAMBI Via Spinà, 9 C.P. 103 36033 ISOLA VICENTINA (VI) ITALIA Tel. 0444 977655 r.a. Fax 0444 977200 E-mail info@sabreitalia.com http://www.sabreitalia.com
DATE: May 19, 2000 Service Instruction No. 1443E (Supersedes Service Instruction No. 1443D) Engineering Aspects are FAA Approved
DATE: May 19, 2000 (Supersedes Service Instruction No. 1443D) Engineering Aspects are FAA Approved SUBJECT: MODELS AFFECTED: TIME OF COMPLIANCE: Approved Slick Magnetos on Textron Lycoming Engines See
MIRROR, GLASS AND PANEL TRIM
... MIRROR, GLASS AND PANEL TRIM RIGHT SHAPES RIGHT PRICE RIGHT NOW J CAP ALUMINUM CAP FOR 1/16" MATERIAL FR 0230, BC ALUMINUM CAP FOR 3/32" MATERIAL FR 0330, BC ALUMINUM CAP FOR 5/32" MATERIAL FR 0430,
SPRINGS; SHOCK-ABSORBERS; MEANS FOR DAMPING VIBRATION
CPC - F16F - 2017.08 F16F SPRINGS; SHOCK-ABSORBERS; MEANS FOR DAMPING VIBRATION Springs, shock-absorbers or vibration-dampers; Their arrangement in, or adaptation for, particular apparatus if not provided
OIL BURNERS MAIOR P 45 AB. techniques for energy saving MODEL. HYDRAULIC SYSTEM 220/380 V 60 Hz LB
OIL BURNERS techniques for energy saving MODEL MAIOR P 45 AB HYDRAULIC SYSTEM 220/380 V 60 Hz LB462 09.12.99 TECHNICAL DATA MODEL MAIOR P 45 AB Thermal power max. kcal/h 450.000 kw 522 Thermal power min.
There are many pre-designs of Vulkan launcher.
There are many pre-designs of Vulkan launcher. This is next one: age A(x8) - h=45 m, d=3,9 m age B - h=57 m, d=7,75 m age C - h=27 m, d=6,7 m escape syem - h=3,8 m, d=1,1 m Model 2 H ~920 mm Paper used:
DeZURIK MANUAL G-SERIES ACTUATOR USED ON PEF 100% PORT PLUG VALVES
MANUAL G-SERIES ACTUATOR USED ON PEF 100% PORT PLUG VALVES Instruction D10456 August 2012 Manual G-Series Actuator used on Instructions These instructions provide information about Manual G-Series Actuators
APPENDIX VIII. SOUND AND SHADOW FLICKER ASSESSMENT
APPENDIX VIII. SOUND AND SHADOW FLICKER ASSESSMENT 140 New Victoria Community Wind Project July 6, 2016 Sound and Shadow Flicker Report AL-PRO Wind Energy Consulting Canada Inc. Introduction Celtic Current
1ZSE en, Rev. 7. Transformer bushings, type GOB Technical guide
1ZSE 2750-102 en, Rev. 7 Transformer bushings, type GOB Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers, access to all the technical
Pressure measurement. Process pressure VEGABAR 14 VEGABAR 17. Product Information
Pressure measurement Process pressure VEGABAR 4 VEGABAR 7 Product Information Contents Contents Description of the measuring principle........................................................... Type overview..............................................................................
Level Limit Switch liquiphant FTL 360 / FTL 361
Technical Information TI 184F/00/en evel imit Switch liquiphant FT 360 / FT 361 evel limit switch iquiphant II with vibrating probe. For all types of liquid. iquiphant level limit switch: FT 360, compact
Homepage > Products > Control units > VARYCONTROL > Secondary silencer > Type TX. Type TX
Homepage > Products > Control units > VARYCONTROL > Secondary silencer > Type TX Type TX FOR THE REDUCTION OF AIR-REGENERATED NOISE OF AIR TERMINAL UNITS TYPE TVJ, OR EN Rectangular secondary silencers
Safety 14 ga. Welded Plastic Bin Security Fire Resistant Gas Cylinder
All Cabinets Ship Flyer CAB07B...Many in 48 hrs. Heavy Duty All Welded CABINETS 40 Models Safety 14 ga. Welded Plastic Bin Security Fire Resistant Gas Cylinder Powder Coated Finish Safety Cabinets are
Fax: Tel:
Section 1 Standard Stock Grinding Wheels 1 Shape Stock Code Sizes mm Specification m/s RPM Sale Price Stock Qty In Stock? Description Application T5 M50161 25 x 25 x 6.35 R/O/S 13 x 13 3SA 060 K V114 45
Cylinder Kits TURFMASTER no Description Model OEM no.
HONDA ACYLHONGX100 ACYLHONGX120 CP120011001 ACYLHONGX160 CP160011001 Dia. 56mm Piston Assy. AAB30237 Ring Set AAB30354 Dia. 60 mm Piston Assy. 13701-ZH7-010 AAB30239 Ring Set AAB30322 Dia. 68mm Piston
MOONEY INTERNATIONAL CORPORATION The Symbol of Performancet MOONEY SPECIAL LETTER Date:
MOONEY INTERNATIONAL CORPORATION The Symbol of Performancet MOONEY SPECIAL LETTER 15-24 Date: 11-19-2015 SUBJECT: MODELS/ S/N AFFECTED: To ADVISE MOONEY OWNERS/OPERATORS of the LYCOMING Service Instruction
Summary of estimated process emissions from identified cement production Richard Heede Climate Accountability Institute
0 A B C D E F G H I J K L M N O P Q R S T U V W Cemex Summary of estimated process emissions from identified cement production Climate Accountability Institute dataset marker Cement Notes China, PRC 0
ValueLine. BAUER BG 26 Rotary Drilling Rig Base Carrier BT 70
BAUER Rotary Drilling Rig Base Carrier BT 7 The BAUER BG The BG Perfection is achieved when there is nothing left to take away. Drilling uncased deep boreholes stabilized by drilling fluid, or drilling
BSW , -204 Inductive Rotary Cam Switches. User's Guide. Rotary Cam Switches BSW BSW
BSW 86-0, -04 User's Guide Rotary Cam Switches BSW 86-0 BSW 86-04 Balluff GmbH Schurwaldstrasse 9 7765 Neuhausen a.d.f. Germany Tel. +49 758 7-0 Fax +49 758 500 balluff@balluff.de www.balluff.com Read
1ZSE en, Rev. 9. Transformer bushings, type GOB Technical guide
1ZSE 2750-102 en, Rev. 9 Transformer bushings, type GOB Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
G3 UNIVERSAL GRIP CONFIGURATION GUIDE
G3 UNIVERSAL GRIP CONFIGURATION GUIDE www.ottoexcellence.com Industrial Grips for Demanding Applications OTTO serves agriculture, construction, off-highway, material handling and specialized industrial
Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
Boiler Tube Cleaners Tube Cleaners for Straight Tubes
Tube Cleaners for Straight Tubes 1/2" to 1-3/8" (12.7 to 34.9 mm) I.D. Range: 1/2 in. (12.7 mm) - 1-3/8 in. (34.9 mm) Deposit: heavy-medium to soft Midget Motor with optional heads shaft wrench; metal
Spiral Bevel Gearboxes Type BG. General. 1. Construction Features. 2. Lubrication
Spiral Bevel Gearboxes Type BG General Spiral bevel gearboxes BG incorporate the most modern advances in bevel gearbox design and construction. These gearboxes offer an extensive range of ratios together
TELECOMMUNICATIONS SPECIAL PURPOSE FUSES
TELECOMMUNICATIONS SPECIAL PURPOSE FUSES Ferraz Shawmut telecommunications fuses are specially designed for the protection of telecommunications equipment which includes telephone switching equipment,
colours for the facade
A widec range of colours for the facade profine GmbH KBE Fenstersysteme Motzener Str. 31-33 12277 Berlin Phone: +49 (0)30 86873-0 Fax: +49 (0)30 86873-386 Email: kbe@profine-group.com www.kbe-online.de
fischer Superbond System
fischer Superbond System The universal solution for cracked concrete. ETA-12/0258 fischer Superbond System FSB: The universal solution for concrete. Advantages at a glance Variable of 60 600 mm Free choice
Cartesian Robot ICSB/ICSPB.
Cartesian Robot ICSB/ICSPB www.intelligentactuator.com The ICSA Series Cartesian Robots Have Been Totally Upgraded! The ICSB/ICSPB Cartesian robots are pre-configured units based on the seven 2-axis configurations
Increased Performance for Turbo Gears BHS AeroMaXX
Increased Performance for Turbo Gears BHS AeroMaXX 1 A Purely Passive-Mechanical Solution BHS AeroMaXX Effi ciency Meets Reliability The BHS AeroMaXX technology from Voith is a simple and reliable solution
AR28.10-P-1004SYZ Disassemble, assemble and seal MODEL /18, /28 with TRANSMISSION 722.9
AR28.10-P-1004SYZ Disassemble, assemble and seal 31.7.07 MODEL 221.08 /18, 204.08 /28 with TRANSMISSION 722.9 1 Collar nut 2 Output flange 3 Radial shaft seal 4 Intermediate housing 5 Automatic transmission
6801 Series. Flanged Ball Valves, API 607 Firesafe. ASME Class 300, Flanged Ends. Full Port. 2-pc, Split Body. Carbon or Stainless Steel
Features Investment cast 2-piece bolted body construction Blow-out proof stem Reinforced seats Adjustable, live-loaded graphite packing API 598 inspection and testing API 67 5th Edition fire tested Locking
Standard!Hydraulic Cylinders affiliated with aadag group we can checkered lilies of the valley
StandardHydraulic Cylinders affiliated with aadag group we can checkered lilies of the valley IB.ING. GmbH Maschinenbau Stahlbau Hydraulik Phone +49(0)231 / 07-0 Fax +49(0)231 / 07-77 02.2011 GB IB.ING.
Basic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
Diamond Systems DIAMOND SYSTEMS
DIAMOND SYSTEMS 88 Diamond drilling tools Diamond coring tool DD 110-W Page 92 Diamond coring tool DD 150-U Page 92 Diamond coring tool DD 160 Page 93 Diamond coring tool DD 200 G02 Page 93 Diamond coring
Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
Installation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual Flat Belt Center Drive LPZ Conveyors Table of Contents Warnings General Safety........................... 2 Introduction.......................................
400W, 5V - 188V Surface Mount Transient Voltage Suppressor
400W, 5V - 188V Surface Mount Transient Voltage Suppressor FEATURES Low profile package Ideal for automated placement Glass passivated junction Excellent clamping capability Fast response time: Typically
SIGNAGE & SAFETY ACCESSORIES
SIGNAGE & SAFETY ACCESSORIES Tab 18 SUBSTATION MIMIC KEYBOARD SUBSTATION MIMIC KEYBOARD Item Code DSSB-SSA-SMK343 DSSB-SSA-SMK363 500kV Size 3' x 4' x 3" 3' x 6' x 3" Power Plant 275kV (AIS) SUBSTATION
Flat Belt Center Drive LPZ Conveyors
Flat Belt Center Drive LPZ Conveyors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 20 975 Cottonwood Ave. TEL: 1-800-397-8664 TEL: 262-367-7600 Hartland,
How to determine which TYPE of swirl flap manifold you have/need.
How to determine which TYPE of swirl flap manifold you have/need. In order to determine your manifolds type, you could remove your engine cover or let us know your engine code. Engine code is written either
MCC SMBJ5.0 THRU SMBJ440CA. Features. Transient Voltage Suppressor 5.0 to 440 Volts 600 Watt. Mechanical Data
omponents 20736 Marilla Street Chatsworth!"# $%!"# SMBJ5.0 THRU SMBJ440CA Features For surface mount applications in order to optimize board space Low profile package Fast response time: typical less than
DRILLS. Down The Hole Button Bits
DRILLS Down The Hole Button Bits ECM Drills Down The Hole drilling equipment ECMining, the registered holder of ECMDrills, has sourced globally competitive and proven high quality Down The Hole (DTH) drilling
SMA6J5.0A(CA) - SMA6J440A(CA)
SMA6J5.0A(CA) - SMA6J440A(CA) SURFACE MOUNT TRANSIENT VOLAGE SUPPESSOR DIODE VOLTAGE RANGE: 5.0-440 V POWER: 600Wa t t s Features Glass Passivated Die Construction Uni- and Bi-Directional Versions Available
Product Information. Gripper change system GWS
Product Information GWS GWS Flat. Robust. Strong. GWS gripper change system pneumatic gripper change system Field of application Fast conversion of production lines for other products; the use of various