8WH6 ipo Installation Terminals
|
|
|
- Shona Scott
- 6 years ago
- Views:
Transcription
1 /2 Introduction /4 8WH through-type terminals /6 8WH through-type screw terminals /8 8WH N-conductor isolating terminals /10 8WH N-conductor isolating screw terminals /12 8WH installation terminals More technical product information: Service&Support Portal: Product List: Technical specifications Entry List: Updates / Downloads / FAQ / Manuals / Operating instructions / Characteristic curves / Certificates
2 Introduction Overview Devices Page Function 8WH through-type terminals /4 Connection of incoming and outgoing conductors up to 6 mm 2 8WH through-type screw terminals /6 Connection of incoming and outgoing conductors up to 5 mm 2 with screw terminals 8WH N-conductor isolating terminals /8 Terminal blocks up to 6 mm² and connection of an N-busbar 10 mm mm 8WH N-conductor isolating screw terminals /10 Terminal blocks with screw connection up to 5 mm² and connection of an N-busbar 10 mm mm 8WH installation terminals /12 Terminal blocks for connection of an N-busbar 10 mm mm. These terminals offer up to three terminal functions in a single enclosure and are optimized for distribution board applications in installation technology. /2
3 Introduction Terminal type ipo technology Screw terminals ipo technology Order No. Design Standard Standard Insta (digits ) No. of clamping points 2 2 Order No. (digits ) 8WH WH WH6 001 Conductor cross-section Terminal type 1) Color 2.5 mm 2 Through-type Gray AF00 Blue AF01 N-conductor isolating Blue BF00 PE Green/yellow CF07 Insta L Gray QF00 L/L DF00 L/N CF00 PE/L/L HF00 PE/L/N EF00 PE/L/NT FF00 PE/L/N isolating GF00 blade PE/L/L isolating blade NF00 4 mm 2 Through-type Gray AG00 Blue AG01 N-conductor isolating Gray BG00 PE Green/yellow CG07 6 mm 2 Through-type Gray AH00 Blue AH01 N-conductor isolating Blue BH00 PE Green/yellow CH07 10 mm 2 N-conductor isolating Blue BJ01 16 mm 2 Through-type Blue AK01 Gray AK00 N-conductor isolating Blue BK01 PE Green/yellow CK07 5 mm 2 Through-type Gray AM00 Blue AM01 N-conductor isolating Blue BM01 PE Green/yellow CM07 1) Only the main terminal types are listed here. You will find further versions on the following pages. /
4 8WH through-type terminals Overview All types of conductors can be used with 8WH6 ipo technology. Rigid conductors and crimped flexible conductors are plugged directly into the terminal. Flexible, untreated conductors can be connected using a screwdriver. These terminals can be used interconnected with the N-busbar 10 mm. A label can be snapped on to the middle of each terminal at the front. Labels can also be mounted flat on the clamping points of the terminals. Technical specifications 8WH AF00 8WH AF00 8WH CF07 8WH AG00 8WH CG07 8WH AH00 8WH AG01 8WH AH01 8WH AH07 Cross-section mm² (PE) 4 4 (PE) 6 6 (PE) Dimensions Width/length/width of cover mm 5.2 / 59.5 / / 66 / / 66 / 2.2 Height (TS 5/7.5 / TS 5/15) mm 4 / / / 57.5 Rated current I n / cross-section A/ mm² 24 / / / 4 -- / 4 41 / 6 -- / 6 Max. load current I max / cross-section A/ mm² 24 / 4 -- / 4 2 / 6 -- / 6 50/10 -- / 10 Rated voltage U n V Connection capacities Rigid mm² Flexible with end sleeve mm² Stripped length mm Molded plastic type PA Flammability class acc. to UL 94 V0 Support rails/protective conductor busbars Selection and ordering data -- See section "Support rails" on page 1/ -- See section "Support rails" on page 1/ -- See section "Support rails" on page 1/ Version DT Order No. Price per PU PU (UNIT, SET, M) PS*/ P. unit PG Terminal size 2.5 mm² 8WH AF00 8WH CF07 /4 Through-type terminals, terminal size 2.5 mm², acc. to IEC Terminal width 5.2 mm, terminal length 59.5 mm Terminal height (NS 5/7.5) 4 mm Max. load current I max = 24 A Rated voltage U n = 800 V Rigid mm² Flexible with end sleeve mm² AWG Gray 8WH AF Blue 8WH AF PE through-type terminals, terminal size 2.5 mm², IEC WH CF Green/yellow Terminal width 5.2 mm, terminal length 59.5 mm Terminal height 4 mm Cross-section max. 4 mm² Rigid mm² Flexible with end sleeve mm² AWG 24-12
5 8WH through-type terminals Version DT Order No. Price per PU PU (UNIT, SET, M) PS*/ P. unit PG Terminal size 4 mm² 8WH AG00 8WH AG07 Terminal size 6 mm² 8WH AH00 Through-type terminals, terminal size 4 mm², acc. to IEC Terminal width 6.2 mm Terminal length 66 mm Terminal height 46. mm Max. load current I max = 2 A Rated voltage U n = 800 V Rigid mm² Flexible with end sleeve mm² AWG Gray 8WH AG Blue 8WH AG PE through-type terminals, terminal size 4 mm², 8WH CG acc. to IEC Green/yellow Terminal width 6.2 mm Terminal length 66 mm Terminal height 46. mm Rigid mm² Flexible with end sleeve mm² AWG Through-type terminals, terminal size 6 mm², acc. to IEC Terminal width 8.2 mm Terminal length 66 mm Terminal height 50 mm Max. load current I max = 41 A Rated voltage U n = 800 V Rigid mm² Flexible with end sleeve mm² AWG Gray 8WH AH Blue 8WH AH WH AH01 8WH AH07 Accessories 8WH9 14-0AF01 8WH WA00 PE through-type terminals, terminal size 6 mm², acc. to IEC Green/yellow Terminal width 8.2 mm Terminal length 66 mm Terminal height 50 mm Rigid mm² Flexible without end sleeve mm² Flexible with end sleeve mm² AWG WH CH Support brackets Made of blue molded plastic For holding the N-busbar For terminal size mm² 8WH9 14-0AF For terminal size 6 mm² 8WH9 14-0AH Covers Gray For terminal size 2.5 mm² 8WH WA For terminal size 4 mm² 8WH9 00-7WA For terminal size 6 mm² 8WH WA Note: For general accessories for 8WH terminal blocks, see chapter 8. /5
6 8WH through-type screw terminals Overview We offer a comprehensive range of installation terminals with ipo technology for use in building management systems. We also offer a range of compact, cost-effective terminal blocks with screw terminals for connecting larger cross-sections. Terminal blocks mounted on N-busbars are most commonly used in building management systems. In order to enable the butt-mounting of different terminals, contact to the N-busbar is always on the same mounting level. This means that 8WH1-001 screw terminals and 8WH6-001 plug-in terminals can be combined as required and mounted on a single support rail. Labels can be affixed at each clamping point by simply snapping them on at the front. Technical specifications 8WH AK00 8WH AK01 8WH CK07 8WH AM00 8WH AM01 8WH CM07 Cross-section mm² (PE) 5 5 (PE) Max. cross-section with comb (rigid/flexible) mm² 16 / / 5 -- Dimensions Width/length/width of cover mm 12.2 / 42.5 / / 42.5 / / 55 / / 55 / -- Height (TS 5/7.5 / TS 5/15) mm 47 / 54.5 / / 54.5 / / 58.5 / / 58.5 / 56 Max. load current I max /cross-section A/ mm² 101 / / / / 5 Rated impulse withstand voltage/pollution degree kv 6 / 6 / 8 / 8 / Overvoltage category / molded plastic group III / I III / I III / I III / I Connection capacities For one conductor - Rigid mm² Flexible with end sleeve mm² For two conductors of same cross-section - Rigid / flexible mm² / / / / Flexible with end sleeve mm² Stripped length mm Plug gauge (IEC ) B7 B7 B9 B9 Clamping point: Screw thread / tightening torque Nm M4 / M4 / M6 / M5 / Fixing: Screw thread / tightening torque Nm -- M4 / M5 / Molded plastic type PA PA PA PA Flammability class acc. to UL 94 V2 V2 V2 V2 Approval data (UL/cUL and CSA) UL/cUL - Rated voltage / rated current / conductor sizes V/A/AWG 600 / 85 / / -- / / 115 / / -- / 18-2 CSA - Rated voltage / rated current / conductor sizes V/A/AWG 600 / 85 / / -- / / 10 / / -- / -- Selection and ordering data Version Order No. MOQ* Terminal size 16 mm² Through-type screw terminals, terminal size 16 mm² Width 12.2 mm Gray 8WH AK00 Blue 8WH AK01 8WH AK00 /6
7 8WH through-type screw terminals Version Order No. MOQ* Terminal size 16 mm² (contd.) Through-type screw PE terminals, terminal size 16 mm² Width 12.2 mm Enclosed at both ends Green/yellow 8WH CK07 8WH CK07 Terminal size 5 mm² Through-type screw terminals, terminal size 5 mm² Width 16 mm Enclosed at both ends Gray 8WH AM00 Blue 8WH AM01 8WH AM00 Through-type screw PE terminals, terminal size 5 mm² Width 16 mm Enclosed at both ends Green/yellow 8WH CM07 8WH CM07 Accessories Covers, for screw terminals 10/16 mm 2 Width 2 mm Gray 8WH9 005-PA00 8WH9 005-PA00 Bridge, 10-pole For through-type terminals, 16 mm 2, gray and blue 8WH9 00-6AL00 10 units 8WH9 00-6AL00 Bridge, 2-pole For through-type terminals, 5 mm 2, gray and blue 8WH9 00-6BC00 10 units 8WH9 00-6BC00 Bridge, -pole For through-type terminals, 5 mm 2, gray and blue 8WH9 00-6BD00 10 units 8WH9 00-6BD00 Compartment partitions For through-type terminals, 16 mm 2, gray and blue 8WH HA00 8WH HA00 Insulation plates For through-type terminals, 16 and 5 mm 2, gray and blue 8WH GA00 8WH GA00 Note: For general accessories for 8WH terminal blocks, see chapter 8. /7
8 8WH N-conductor isolating terminals Overview The N-conductor disconnect slides are in the same position on all 8WH6-001 terminals using ipo plug-in technology. A 10 mm mm busbar is used. Notice: Only use Cu busbars. Installation instructions: To ensure that the N-busbars are securely mounted, the support brackets must be placed at the beginning and end of each terminal strip (in the case of longer terminal strips: every 20 cm). A label can be snapped on to the middle of the terminal at the front. Labels can also be mounted flat on the clamping points of the terminals (not with N-busbar connection). Technical specifications 8WH BF01 8WH BG01 8WH BH01 Cross-section mm² Dimensions Width/length/width of cover mm 5.2 / 59 / / 66 / / 66 / 2.2 Height (NS 5/7.5 / NS 5/15) mm 46./ / / 57.5 Rated current I n / cross-section A/ mm² 24 / / 4 41 / 6 Rated voltage U n V Connection capacities Rigid mm² Flexible with end sleeve mm² Stripped length mm Molded plastic type PA PA PA Flammability class acc. to UL 94 V0 V0 V0 /8
9 8WH N-conductor isolating terminals Selection and ordering data Version Order No. MOQ* Terminal size 2.5 mm² 8WH BF01 Terminal size 4 mm² 8WH BG01 Terminal size 6 mm² 8WH BH01 Accessories 8WH9 14-0AF01 8WH SA00 8WA2 867/8WA2 868/ 8WA2 870 N-conductor isolating terminals, terminal size 2.5 mm², acc. to IEC Two clamping points Terminal width 5.2 mm Terminal length 59 mm Terminal height (NS 5/7.5) 46. mm Rated current 24 A / cross-section 2.5 mm² Rated voltage U n = 250 V Rigid mm² Flexible with end sleeve mm² AWG 26 to 12 N-conductor isolating terminals, terminal size 4 mm², acc. to IEC Two clamping points Terminal width 6.2 mm Terminal length 66 mm Terminal height (NS 5/7.5) 46. mm Rated current 2 A / cross-section 4 mm² Rated voltage U n = 250 V Rigid mm² Flexible with end sleeve mm² AWG 24 to 10 N-conductor isolating terminals, terminal size 6 mm², acc. to IEC Two clamping points Terminal width 8.2 mm Terminal length 66. mm Terminal height (NS 5/7.5) 50 mm Max. load current I max = 41 A Rated current 41 A / cross-section 6 mm² Rated voltage U n = 400 V Rigid mm² Flexible with end sleeve mm² AWG WH BF01 8WH BG01 8WH BH01 Support brackets Made of blue molded plastic For holding the N-busbar For terminal size mm² 8WH9 14-0AF01 For terminal size 6 mm² 8WH9 14-0AH01 Covers Gray For terminal size 2.5 mm² 8WH SA00 For terminal size 4 mm² 8WH9 00-1SA00 For terminal size 6 mm² 8WH SA00 1 unit Feeder terminals, for N-busbars 6 6 mm and 10 mm Bare Rated uninterrupted current 2 A, for connection of up to 4 mm 2 8WA2 867 Rated uninterrupted current 76 A, for connection of up to 25 mm 2 8WA2 868 Rated uninterrupted current 125 A, for connection of up to 5 mm 2 8WA2 870 N-busbars, 10 mm mm Tin-plated 1000 mm long 8WA unit 8WA2 842 Note: For general accessories for 8WH terminal blocks, see chapter 8. /9
10 8WH N-conductor isolating screw terminals Overview We offer a comprehensive range of installation terminals with ipo plug-in technology for use in building management systems. We also offer a range of compact, cost-effective terminal blocks with screw terminals for connecting larger cross-sections. Technical specifications Terminal blocks mounted on N-busbars are most commonly used in building management systems. In order to enable the butt-mounting of different terminals, contact to the N-busbar is always on the same mounting level. This means that 8WH1-001 screw terminals and 8WH6-001 plug-in terminals can be combined as required and mounted on a single support rail. The compact design of our N-conductor isolating terminals makes for a neat and clearly arranged terminal strip. The N-busbar can be connected over the terminal or over the disconnect slide of the N-conductor isolating terminal. The N-conductor isolating terminal also makes it easy to perform insulation measurements. Labels can be affixed on the clamping points (screw) by simply snapping them on at the front. Notice: Only use Cu busbars. 8WH BJ01 8WH BK01 8WH BM01 Cross-section mm² Dimensions Width/length/width of cover mm 10.2 / 4.5 / / 4.5 / / 55 / -- Height (TS 5/7.5 / TS 5/15) mm 47 / 54.5 / / 61.5 / / 58.5/ 56 Max. load current I max /cross-section A/ mm² 6 / / / 5 Rated impulse withstand voltage/pollution degree kv 6 / 6 / 6 / Overvoltage category / molded plastic group III / I III / I III / I Connection capacities For one conductor - Rigid mm² Flexible with end sleeve mm² For two conductors of same cross-section - Rigid / flexible mm² / / / Flexible with end sleeve mm² Stripped length mm Plug gauge (IEC ) B5 B6 B9 Clamping point: Screw thread / tightening torque Nm M4 / M4 / M6 / Fixing: Screw thread / tightening torque Nm M / M / M5 / Molded plastic type PA PA PA Flammability class acc. to UL 94 V2 V2 V2 /10
11 8WH N-conductor isolating screw terminals Selection and ordering data Version Order No. MOQ* Terminal size 10 mm² N-conductor isolating screw terminals, terminal size 10 mm² Width 10 mm Blue 8WH BJ01 8WH BJ01 Terminal size 16 mm² N-conductor isolating screw terminals, terminal size 16 mm² Width 12 mm Blue 8WH BK01 8WH BK01 Terminal size 5 mm² N-conductor isolating screw terminals, terminal size 5 mm² Width 16 mm Enclosed at both ends Blue 8WH BM01 8WH BM01 Accessories Covers, for screw terminals 10/16 mm 2 Width 2 mm Gray 8WH9 005-PA00 8WH9 005-PA00 Support brackets for N-conductor isolating screw terminals, terminal size mm² For holding the N-busbar To be placed every 20 cm 2 mm wide 8WH BA01 8WH BA01 Terminals Blue To 16 mm 2, width: 10. mm 8WH BA01 To 5 mm 2, width: 14.4 mm, enclosed at both ends 8WH BA01 8WH BA01 N-busbars, 10 mm mm Made of copper, tin-plated 1000 mm long 8WA unit 8WA2 842 Note: For general accessories for 8WH terminal blocks, see chapter 8. /11
12 8WH installation terminals Overview The three-tier plug-in terminals offer optimum operating characteristics for modern building installations. The plug-in connection allows tool-free wiring of the solid conductors. These terminals can be used interconnected with the N-busbar 10 mm. Notice: Only use Cu busbars. Thanks to their compact design, the three-tier terminals can be installed in all types of building distribution boards. A load circuit can be quickly and easily wired, for example using a 5.2 mm wide installation terminal with terminal size 2.5 mm² and PE/L/NT connections. The double bridge shafts support a multitude of individual wiring tasks. This also means it is practical and convenient to make subsequent modifications to the installation. Labels can be mounted flat on the clamping points of the terminals. Technical specifications Installation terminals, standard version Installation terminals with isolating function 8WH QF00 8WH DF00 8WH CF00 Cross-section mm² 2.5 Dimensions Width/length/width of cover mm 5.5 / 101 / 2.2 Height (TS 5/7.5 / TS 5/15) mm 50.5 / 58 Rated current I n cross-section A/ mm² 24 / 4 Max. load current I max /cross-section A/ mm² 0 1) / 4 Rated voltage U n V 400 (L-L) 250 (L-N or L-PE) Connection capacities Rigid mm² Flexible with end sleeve mm² Stripped length without insulation stop sleeve mm 10 (no insulation stop sleeves should be used when using end sleeves) Stripped length with insulation stop sleeve mm 10 (no insulation stop sleeves should be used when using end sleeves) Plug gauge (IEC ) A Molded plastic type PA Flammability class acc. to UL 94 V0 1) -pole terminal block 8WH HF00 8WH EF00 8WH GF00 8WH NF00 8WH PF00 8WH MF00 8WH FF00 /12
13 8WH installation terminals Selection and ordering data Version Order No. MOQ* Terminal size 2.5 mm² 8WH QF00 8WH DF00 Installation terminals, terminal size 2.5 mm², standard version for N- busbar Gray Terminal width 5.2 mm Rigid mm² Flexible with end sleeve mm² AWG Rated current 24 A / cross-section 4 mm² Rated voltage U n = 400 V (L-L) U n = 250 V (L-N or L-PE) L 8WH QF00 L/L 8WH DF00 L/N 8WH CF00 PE/L/L 8WH HF00 PE/L/N 8WH EF00 PE/L/NT 8WH FF00 8WH HF00 8WH FF00 8WH NF00 8WH PF00 Installation terminals, terminal size 2.5 mm², with isolating blade Gray Terminal width 5.2 mm Rigid mm² Flexible with end sleeve mm² AWG Rated current 24 A / cross-section 4 mm² Rated voltage U n = 400 V (L-L) U n = 250 V (L-N or L-PE) PE/L/L (standard version, suitable for isolating terminal) 8WH PF00 PE/L/N isolating blade 8WH GF00 PE/L/L isolating blade 8WH NF00 Installation terminals, terminal size 2.5 mm², for isolating function Gray Terminal width 5.2 mm Rigid mm² Flexible with end sleeve mm² AWG Rated current 24 A / cross-section 4 mm² Rated voltage U n = 400 V (L-L) U n = 250 V (L-PE) PE/L/L (standard version, suitable for isolating terminal) 8WH PF00 PE/L/L isolation 8WH MF00 /1
14 8WH installation terminals Version Order No. MOQ* Accessories Support brackets, for terminal size 2.5 mm² For holding the N-busbar To be placed every 20 cm 2 mm wide 8WH AF01 8WH AF01 Covers, for terminal size 2.5 mm² gray 8WH9 000-SA00 8WH9 000-SA00 Covers, for terminal size 2.5 mm² and isolating terminal in contour gray 8WH SA00 8WH SA00 8WA2 867/8WA2 868/ 8WA2 870 Feeder terminals, for N-busbars 6 6 mm and 10 mm Bare Rated uninterrupted current 2 A, for connection of up to 4 mm 2 8WA2 867 Rated uninterrupted current 76 A, for connection of up to 25 mm 2 8WA2 868 Rated uninterrupted current 125 A, for connection of up to 5 mm 2 8WA2 870 N-busbars, 10 mm mm Made of copper, tin-plated 1000 mm long 8WA unit 8WA2 842 Note: For general accessories for 8WH terminal blocks, see chapter 8. /14
Terminal Blocks Product Catalog Terminal Block Supplement. Introduction. 8WH6 ipo Plug-In Terminals. 8WH6 ipo Installation Terminals
Terminal Blocks 2013 Product Catalog Terminal Block Supplement Introduction 8WH6 ipo Plug-In Terminals 8WH6 ipo Installation Terminals 8WH2 Spring-Loaded Terminals 1 2 3 4 8WH 8WH5 Combination Plug-In
8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
8WH6 ipo Plug-In Terminals
/ Introduction /3 /4 8WH6 through-type terminals /8 8WH6 fuse terminals /9 8WH6 isolating blade terminals /11 8WH6 isolating terminals /13 8WH6 two-tier terminals More technical product information: Service&Support
SIVACON Power Distribution Boards, Busway Systems and Cubicle Systems
SIVACON Power Distribution Boards, Busway Systems and Cubicle Systems /2 Introduction 8PV, 8PT Power Distribution Boards and Motor Control Centers /7 General data 8PS Busbar Trunking Systems /8 Introduction
BETA Switching Switches and Light Indicators
Siemens AG 2008 BETA Switching /2 Product overview /3 5TE8 control switches / 5TE4 pushbuttons /2 5TE5 light indicators /5 5TE8 ON/OFF switches /22 5TE9 busbars /24 5TE switch disconnectors Siemens ET
Crimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
3NP1 Fuse Switch Disconnectors up to 630 A
Switch Disconnectors 3NP1 Fuse Switch Disconnectors up to 630 A Introduction Overview All key product features at a glance available for all sizes Connection of circular conductors and laminated conductors
Siemens AG Switch Disconnectors SENTRON. Configuration. Edition 10/2015. Manual. siemens.com/lowvoltage
SENTRON Configuration Manual Edition 10/2015 siemens.com/lowvoltage 2 Introduction LD main control and EMERGENCY-STOP switches up to 250 A 4 Introduction 7 Front mounting 10 Floor mounting 11 Distribution
Powermate Range pitch 7.00 Powermate Range pitch 7.00
Contents lug and socket connectors with leaf spring connection.2 lug and socket connectors with TO connection.6.1 lug and socket connectors with leaf spring connection STVS S Derating curve STVS SB Socket
Bolt connection terminal blocks OTTA, UHV, HV. General information
OTTA, UHV, HV Bolt connection terminal blocks General information In traffic guidance, above all in the area of battery distribution, terminal blocks are frequently used to connect ring cable lugs. This
Limit Switches and Safety
and Safety Introduction Overview 3SE5 23., 3SE5 21. 3SF1 2.4 3SE5 24., 3SF1 244 3SE5 13., 3SE5 11., 3SF1 114 3SE5 12., 3SF1 124 3SE5 16. 3SE5 232, 3SE5 212, 3SF1 2.4 3SE5 132, 3SE5 112, 3SF1 1.4 Position
Terminal blocks with Push In connection technology. Product Information
Terminal blocks with Push In connection technology Product Information Overview Terminal blocks with Push In connection technology (P-Series) Less is more With the P-Series, Weidmuller is presenting a
PT 2,5-QUATTRO-PE. Extract from the online catalog. Order No.:
Extract from the online catalog PT 2,5-QUATTRO-PE Order No.: 3209594 Ground modular terminal block, Connection method: Push-in connection, Cross section: - 4 mm², AWG 26-12, Width: 5.2 mm, Color: green-yellow,
3/2 Introduction. Unequipped Distribution Boards (Flat Pack) 3/6 8GK1 surface-mounting distribution boards
ALPHA 400 - DIN Wall-Mounted Distribution Boards /2 Introduction Unequipped Distribution Boards (Flat Pack) /6 8GK1 surface-mounting distribution boards Pre-Assembled Unequipped Distribution Boards /7
PIT 2,5-TG. Extract from the online catalog. Order No.:
Extract from the online catalog PIT 2,5-TG Order No.: 3210185 Disconnect terminal block, Connection type: Leg spring connection, Cross section: - 4 mm², AWG: 26-12, Nominal current: 20 A, Nominal voltage:
Protection Equipment
Protection Equipment Price Groups 101, 102, 121, 131, 143 /2 Introduction Motor Starter Protectors/ Circuit Breakers SIRIUS 3RV2 Motor Starter Protectors up to 40 A new /7 General data /13 For motor protection
DOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD
DOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD PRODUCT INFORMATION Double-level terminal blocks SRKD SSLD CONTA-CLIP offers an innovative line of double-level feed-through terminals SRKD and protective-earth terminals
PT 2,5-QUATTRO/2P BU. Extract from the online catalog. Order No.:
Extract from the online catalog PT 2,5-QUATTRO/2P BU Order No.: 3209675 Feed-through modular terminal block, Connection method: Pushin / plug connection, Cross section: - 4 mm², AWG 26-12, Width: 5.2 mm,
Switch Disconnectors. SENTRON 3NP5 Fuse Switch Disconnectors up to 630 A. Introduction. 7/106 Siemens LV
Switch Disconnectors Introduction Siemens AG 2010 Overview 3NP5 0 3NP5 2 3NP5 fuse disconnector range 3NP5 4 SENTRON 3NP5 fuse disconnectors are controls for the occasional manual ing/isolating of loads
ST 4-HESI (5X20) Extract from the online catalog. Order No.: Fuse terminal block for assembly on NS 35, for 5 x 20 cartridge fuse inserts
Extract from the online catalog ST 4-HESI (5X20) Order No.: 3036369 Fuse terminal block for assembly on NS 35, for 5 x 20 cartridge fuse inserts Commercial data EAN 4017918890476 Pack 50 pcs. Customs tariff
UK 6-FSI/C. Extract from the online catalog. Order No.:
Extract from the online catalog UK 6-FSI/C Order No.: 3118203 Flat-type fuse terminal block, cross section: 0.2-6 mm², AWG: 26-8, width: 8.2 mm, color: black Commercial data EAN 4017918100605 Pack 50 pcs.
CONTA-CONNECT SUPPLEMENTS
CONTA-CONNECT SUPPLEMENTS CONTA-CONNECT system HSKG High-power stud terminals HSKG The newest generation of stud terminals from CONTA-CLIP offers secure connections for all energy-transmitting applications.
PCB plug-in connectors
Contents CB plug-in connectors.16 mm pitch.16 mm pitch Male connectors with solder connection.2 Socket connectors with clamping yoke connection.8.1 Male connectors with solder connection SU.16H/9 Derating
PT 2,5-TWIN/1P BU. Extract from the online catalog. Order No.:
Extract from the online catalog PT 2,5-TWIN/1P BU Order No.: 3209646 Feed-through modular terminal block, Connection method: Pushin / plug connection, Cross section: - 4 mm², AWG 26-12, Width: 5.2 mm,
Datasheet. System pitch mm (0.400 inch) - SU/BU BUZ 10.16HP/02/180F AG BK BX
High-performance female connector with the tried-and-tested, guaranteed zero-maintenance, Weidmüller steel clamping yoke. Side-by-side mounting without losing any poles or with patented multifunction flange
Position and Safety Switches
Siemens AG 20 Position and Safety Switches groups 41K, 42A /2 Introduction SIRIUS 3SE5 mechanical position switches /4 General data 3SE5, plastic enclosures /13 - Enclosure width 31 mm acc. to EN 50047
SENTRON 3NP1 Fuse Switch Disconnectors up to 630 A
Introduction Overview All key product features at a glance available for all sizes Connection of circular conductors and laminated conductors Fuse monitoring possible throughout Busbar supports can be
Protection Equipment. 5/2 Introduction
Protection Equipment /2 Introduction SIRIUS 3RV2 Motor Starter Protectors/ Circuit Breakers up to 40 A /6 General data /12 For motor protection /14 For motor protection with overload relay function /1
Stud connection system HSK
CONTA-CONNECT system HSK The newest generation of stud terminals from CONTA-CLIP offers secure connections for all energy-transmitting applications. Depending on the conductor cross-section, stud terminals
PT 2,5-TWIN/1P BU. Extract from the online catalog. Order No.:
Extract from the online catalog PT 2,5-TWIN/1P BU Order No.: 3209646 Feed-through terminal block, Connection method: Push-in / plug connection, Cross section: 0.14 mm² - 4 mm², AWG: 26-12, Width: 5.2 mm,
3RG4 BERO Inductive Proximity Switches
3RG40 11 3RG40 11 0AA00 10/14 3RG40 11 0AB00 10/14 3RG40 11 0AF00 10/13 3RG40 11 0AF05 10/18 3RG40 11 0AF33 10/17 3RG40 11 0AG00 10/13 3RG40 11 0AG05 10/18 3RG40 11 0AG33 10/17 3RG40 11 0CC00 10/14 3RG40
Datasheet. W-series terminal with clamping yoke connection WSI 6
The fuse terminals of the Weidmüller W Series are available in two different forms: Fuse terminal with pivoting retaining lever Fuse terminal with plug-in SIHA fuse holder General ordering data Order No.
STS 2,5. Extract from the online catalog. Order No.:
Extract from the online catalog STS 2,5 Order No.: 3036398 Feed-through modular terminal block, Connection method: Springcage connection, Spring-cage connection, Cross section: 0.08 mm² - 4 mm², AWG 28-12,
IEC TERMINAL BLOCKS. Screw Clamp Connection. Feed Through DIN Rail 433. Ground DIN Rail 439. Fuse Holder DIN Rail 445. Disconnect DIN Rail 448
CONTROL LOGIC IEC TERMINAL BLOCKS TB c3controls line of IEC terminal blocks are both innovative and user-friendly. They are simple to install and are color-coded for easy circuit identification. From standard
SENTRON Switching and Protection Devices Switch Disconnectors
SENTRON Switching and Protection Devices Switch Disconnectors /2 Introduction 3K, 3KE, 3LD Switch Disconnectors 3K, 3KE Switch Disconnectors up to 1000 /4 General data /8 Floor mounting 3LD Main and EMERGENCY-STOP
JCAM SWITCHES. Model Ratings / Product Numbering System...J2 Technical Data...J3
Springer Controls is partnered with MERZ-PCE, a world leader in the manufacturing of switch gears. We offer complete line of Cam Switches with as many as 24 switch contacts. Each contact has two fixed
SENTRON SIVACON ALPHA
SENTRON SIVACON ALPHA Low-Voltage Power Distribution and Electrical Installation Technology Catalog Extract LV 10 Edition 10/2018 siemens.com/lowvoltage Related catalogs Low-Voltage Power Distribution
Molded-Plastic Distribution Systems
Molded-Plastic Distribution Systems / Introduction ALPHA 8HP molded-plastic distribution systems /8 Empty enclosures / Modular installation devices /4 DIAZED/NEOZED fuse systems /7 NP fuse switch disconnectors
SIRIUS 3RV2 Motor Starter Protectors/Circuit Breakers up to 40 A Accessories Enclosures and front plates
Motor Starter Protectors/Circuit Breakers SIRIUS 3RV2 Motor Starter Protectors/Circuit Breakers up to 40 A Accessories Enclosures and front plates Overview Enclosures For stand-alone installation of 3RV20
Combined pump and gripper Medium
VGS 3010 H D W Dimension and connection W D H Feed pressure Vacuum Exhaust/blow mm mm mm 1 Housing VGS3010 23 30 Ø6 mm, 3x G1/8", M5 2 COAX cartridge 2:1 No COAX cartridge 65 2:2 COAX cartridge 2-stage
Printview: Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1-pole; CAGE CLAMP ; commoning option - Item No.
Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1- pole; CAGE CLAMP ; commoning option Item No: 745-871/006-000 Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1-pole; CAGE CLAMP ; commoning
Terminal blocks with clamping yoke and screw connection system
Overview W-Series Terminal blocks with clamping yoke and screw connection system High contact reliability for all standard electrical functions For a long time now, Weidmüller s W-Series terminal with
ZS4-SF1 Screw Clamp Terminal Block
Technical Datasheet 1SNK 161 011 D0201 ZS4-SF1 Screw Clamp Terminal Block Fuse Catalogue Page 1SNK 161 011 S0201 4 mm² 10 AWG 8 mm 0.315 in Spacing Features and Benefits 90 90 180 59.7 2.35" - Protect
Approvals (p. 906) 0 371 61 0 371 63 0 371 64 0 371 66 0 371 69 0 371 68 0 371 00 0 371 08 0 371 20 Connecting (p. 300) 1 connection - 1 entry/1 outlet ELECTRICAL FUNCTION TERMINAL BLOCKS INSULATION EQUIPOTENTIAL
DBL distribution blocks 3x1 pole
TECHNICAL DATASHEET 1SNC166019D0201 - CATALOGUE PAGE 1SNC166020S0201 DBL distribution blocks 3x1 pole 84.6 3.33" 25 0.98" 32.5 1.28" 28.2 1.11" 23.5 0.93" 14.7 0.58" 36.3 1.43" 75 2.95" 62 2.44" 50.7 2"
Datasheet. W-series terminal with clamping yoke connection WDU 4
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
ZS10-ST Screw Clamp Terminal Blocks Test disconnect with sliding link
Technical Datasheet SNK656D0 Catalogue Page ZS-ST Screw Clamp Terminal Blocks Test disconnect with sliding link - Secure your disconnect operations in control circuits with the robust sliding link operated
Data sheet... W terminal earth terminal WPE 4
The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² N). General ordering data Order No. 1010100000 Type
ZS6-D1-PE Screw Clamp Terminal Blocks Double deck with 1 ground circuit
Technical Datasheet SNK649D00 Catalogue Page ZS6-D-PE Screw Clamp Terminal Blocks Double deck with ground circuit - Save space with double deck ground terminal blocks aligned with ZS6-D double deck terminal
Horizontal fuse disconnects
THE NAME FOR SAFETY Horizontal fuse disconnects Horizontal fuse disconnects Horizontal fuse Disconnects are used in building installations, switchgear and controlgear as well as in power utility networks.
SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices. Orifice plate with annular chambers. 4/358 Siemens FI
Application Dimensional drawings Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -60 to +550 C. Design Two support rings with replaceable orifice disk
CRITO Connection technology. Double and triple T and TCC section busbars
Centre feed unit 5 Centre feed unit Centre feed unit 5 Centre feed unit up to 4000 A combines the advantages of high short-circuit capacity, drill-free mounting, brace terminal technology and clearly structured
PANEL PANEL MOUNTING COMPONENTS
PANEL PANEL MOUNTING COMPONENTS For conventional wiring, Wöhner offers a comprehensive range of panel components for fastening to a DIN rail or mounting plate. The fuses and associated connection technology
Female socket block, Screw connection, No. of poles: 12, Width: mm, Colour: Green
Female socket block, Screw connection, No. of poles: 12, Width: 45.72 mm, Colour: Green Business data Connector version Free connector Packaging unit 50 Quantity unit PC Packaging type Carton Type of banding
Data sheet... W-Series WPE 4
The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² WPE 4N). General ordering data Order No. 1010100000
Power distribution components
Industrial electronics Power distribution components Reliable, cost-effective, complete R England sv_001.fm Rittal power distribution components Bar centre distance (mm) Number of poles Busbar dimensions
INNOZED D0 fuse-bases with touch protection
INNOZED D0 fusebases with touch protection INNOZED D0 fusebases with touch protection FUSE HOLDERS, FUSE BASES AND SUPPORTS IEC D0 & D FUSE BASES FEATURES & BENEFITS INNOZED is a fuse base for D0 fuselinks,
Data sheet... OMNIMATE Signal - series LM LM 5.00/04/90 3.5SN OR BX
PCB terminal with proven clamping yoke connection at 5.00 and 5.08 mm pitch. Conductor outlet direction 90, 135 and 180. Suitable for conductor cross-sections up to 2.5 mm². 0.13-2.50 mm² (IEC) / 26-14
MOULDED CASE CIRCUIT BREAKERS BC160N
D MOULDED CASE CIRCUIT BREAKERS BC160N D BC160N COMMERCIAL INFORMATION Circuit breakers...d4 Switch-disconnectors...D5 Connecting sets......d6 Mounting sets......d6 Switches...D7 Shunt trips...d7 Undervoltage
PANEL-MOUNTING COMPONENTS FUSE HOLDERS. Quality
PANEL-MOUNTING COMPONENTS FUSE HOLDERS Quality For conventional wiring, Wöhner offers a comprehensive range of panel components for fastening to a DIN rail or mounting plate. The fuses and associated
Double-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / in
Double-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / 0.394 in Item No.: 736-704 Double-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / 0.394
125 to 4000 A. Functions. Conformity to standards. Approvals and certifications (1) General characteristics. Available on request
125 to 4000 A sirco_353_a_1_cat sirco_296_a_1_cat sirco_300_b switches are manually operated or motorised multipolar load break switches. They break on and off under load and provide safety isolation for
Datasheet. BL/SL 5.08 series BLF 5.08/02/180 SN OR BX
Just as reliable as the tried-and-tested original, with innovation in detail: the BLF 5.08 the PUSH-IN version of the BLZ 5.08 female header features a new connection system and a more compact design.
Series KTU7 UL489 Molded Case Circuit Breakers
Series UL489 Molded Case Circuit Breakers Versatile, convenient and space saving for a variety of applications Sprecher+Schuh s series of UL are UL489 and CE listed for global applications. The current
Motorized switch-disconnectors OTM 40 to 125 Amperes
Motorized switch-disconnectors OTM to 125 mperes With the new range of motorized-switch disconnectors, BB offers now a full range from to 2500 mperes. Thanks to the design, OTM...125 are a good solution
Viking 3 - Screw connection Disconnect terminal blocks
87045 LIMOGES Cedex Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Viking 3 - Screw connection 1. General features... 1 2. Range...2 3. Standards... 2 4. Technical features... 3 5. Dimensions...
Original Manual 2CCC444010M0201 Rev. 1.0, Date of Release: 02/2016. Remote Power Panel Assembly instructions
Original Manual 2CCC444010M0201 Rev. 1.0, Date of Release: 02/2016 Remote Power Panel Assembly instructions Table of contents Unpacking and checking the cabinet Visual control of the packaging 3 Unpacking
SL1Series. Compact Horizontal Limit Switches
Compact Horizontal Limit Switches SL1Series Mechanical life of 0 million operations. Robust long-life and maintenance-free compact horizontal-type limit switches with IP67 seal. Mechanical life exceeds
MS25, MST25, MS20, MST20
Versions: - MS25 with thermal and magnetic releases - MST25 with a thermal release - MS20 - with thermal and magnetic releases for single-phase consumers - MST20 with a thermal for single phase consumers
Technical Brochure. Rotary Type Installation Switches A, 500 V. Brochure OT_M 22 GB D Low Voltage Products
94 D 5384 Technical Brochure Rotary Type nstallation Switches 16...160 A, 500 V Brochure T_M 22 GB 99-08 Low Voltage Products 9809CD03 Rotary Type nstallation Switches 16 A...160 A ew features for installation
Push Button Units and Indicator Lights
3SB3, Inscriptions, 22 mm Insert labels Push Button Units and Indicator Lights Push buttons (clear) and illuminated push buttons with a flat button can be fitted with insert labels for identification purposes,
ZS10-S-R2 Screw Clamp Terminal Blocks Disconnect with lever
Technical Datasheet SNK6D0 Catalogue Page ZS-S-R2 Screw Clamp Terminal Blocks Disconnect with lever Simplify the disconnect operations for the disconnect terminal blocks installed next to fuse terminal
BETA Low-Voltage Circuit Protection
BETA Low-Voltage Circuit Protection /2 Introduction Miniature Circuit Breakers /4 5SP and 5SY miniature circuit breakers / 5SJ6...-.KS miniature circuit breakers with plug-in terminal /21 5SY6 0 miniature
Siemens AG Price groups PG 14O, 41B, 41E, 41F, 41G, 41H, 41J, 42F, 42J
Protection Equipment Siemens AG 2015 Click on the Article No. in the catalog PDF to access it in the Industry Mall and get all related information. Article-No. 3RA1943-2C 3RA1943-2B 3RA1953-2B 3RA1953-2N
FUSERBLOC Fuse combination switches for industrial fuses up to 1250 A
Fuse protection fuser_548_a cat The solution for > Motor load break. > Protection of industrial cabinet. FUSERBLOC 6 to 25 A Strong points fuser_52_a cat Function FUSERBLOC 2 to 4 A FUSERBLOC are manually
SECTION SECTION. EATON 2014 Arrow Hart Buyers Guide
F SECTION SECTION 1 EATON 2014 Arrow Hart Buyers Guide FSECTION Cam-lok Single Pole Connectivity Table of contents Product selector guide F-3 NEMA rating system F-4 F-series F-5 E1010 F-6 E1012 F-7 F-series
IEC Low Voltage General Purpose Protection
, 6A, 0/400VAC (/440VAC) Complying with DIN VDE 0660 Part 07 EN / IEC 60947- DIN VDE 066 Part IEC 6069- DIN VDE 068 DIN VDE 4880 The D0-LINOCUR is a combination of switch-disconnector-fuse and NEOZED 6
Vacuum Automation 2.1. The future depends on good product choices
Vacuum Automation 2.1 The future depends on good product choices Combined pump and gripper 432 433 Combined pump and gripper Introduction...434 Small...436 Medium...438 Large...452 Accessories...455 434
Han K 3/0, K 3/2 / Han HC Modular. Contents Technical characteristics Han K 3/0, Han K 3/ Inserts Han K 3/0, Han K 3/
Han K 3/0, K 3/2 / Han HC Contents Page Technical characteristics Han K 3/0, Han K 3/2... 14.02 Inserts Han K 3/0, Han K 3/2... 14.03 Hoods/Housings Han 24 HPR for Han K 3/0, Han K 3/2... 14.04 Technical
ZS35-PEN Screw Clamp Terminal Blocks Ground + Neutral
Technical Datasheet SNK6047D00 Catalogue Page ZS35-PEN Screw Clamp Terminal Blocks Ground + Neutral Simplify your PE.N connection with ZS35-PE block connected to ZS35-BL through a premounted jumper. SNK6063F004
CONTA-CONNECT. Double-level terminal blocks ZRKD 2,5 Double-level protective earth terminal ZSLD 2,5
CONTA-CONNECT Double-level terminal blocks ZRKD 2,5 Double-level protective earth terminal ZSLD 2,5 With a width of just 5 mm, the new ZRKD series is available in thirteen versions and connects with stranded
DIN rail enclosures. Combirail Alurail CombiNorm-Connect CombiNorm-Compact CombiNorm-Classic
DIN rail enclosures Combirail Alurail CombiNorm-Connect CombiNorm-Compact CombiNorm-Classic BOPLA: Innovative, capable and reliable For more than 40 years Bopla has been supporting customers in a wide
FUSERBLOC Fuse combination switches for industrial fuses up to 1250 A
Fuse protection fuser_548_a_1_cat The solution for > Motor load break > Protection of industrial processes FUSERBLOC 63 to 125 A Strong points fuser_532_a_1_cat Function FUSERBLOC 32 to 4 A FUSERBLOC are
1ZSE en, Rev. 7. Transformer bushings, type GOB Technical guide
1ZSE 2750-102 en, Rev. 7 Transformer bushings, type GOB Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers, access to all the technical
Safety switches for hinges
Safety switches for hinges Selection diagram ACTUATORS L L6 L9 L16 FR FM FX FZ FK CONTACT BLOCKS 6 7 9 14 18 snap action 1NO+1N, make before break, shifted, close 21 4 66 NC 2NO+ 1NO+ CONDUIT ENTRIES Threaded
Air Circuit Breakers
Siemens AG 203 /2 Introduction 3WL air circuit breakers/ non-automatic air circuit breakers up to 6300 A (AC), IEC /8 Introduction /9 3-pole, fixed-mounted versions /6 3-pole, withdrawable versions /23
MULTIBLOC 2.RST8 Size 2, 400A, 690VAC, Design for bus bar installation, Triple Pole
MULTIBLOC 2.RST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC 2.RST8 comprises NH fuse switch disconnectors for 400A. Products are designed in triple
TM ETRS-TM35FIN-ETRS89 WTG
Noise calculation model: ISO 9613-2 General Wind speed: 8,0 m/s Ground attenuation: General, Ground factor: 0,4 Meteorological coefficient, C0: 0,0 db Type of demand in calculation: 1: WTG noise is compared
INNOZED D0 fuse-bases with touch protection
D0 fusebases with touch protection D0 fusebases with touch protection FUSE HOLDERS, FUSE BASES AND SUPPORTS IEC D0 & D FUSE BASES FEATURES & BENEFITS is a fuse base for D0 fuselinks, sizes D0 and D02.
- 1 - General ordering data Order No
General ordering data Order No. 1748280000 Part designation B2L 3.5/28 F SN SW Version EAN 4032248156535 Qty. 20 pc(s). PCB plug-in connector, Female connectors, Tension clamp connection, Clamping range,
Panel-mounting components
Quality Panel-mounting components For conventional cabling, Wöhner offers a comprehensive range of panel components suitable for either plate or DIN-rail mounting. Fuses and the associated connection technology
ZS10-PE Screw Clamp Terminal Blocks Ground
Technical Datasheet SNK606D00 Catalogue Page ZS0-PE Screw Clamp Terminal Blocks Ground Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: - Rail
Unimate Range Pitch 5.08
itch 5.08 in headers Socket connectors CB connection Solder connection SLA 90 250 V / 17.5 A SLA 180 250 V / 17.5 A.2.3 Cable connection Clamping yoke connection TO clamp connection BLA 250 V / 17,5 A
G3 UNIVERSAL GRIP CONFIGURATION GUIDE
G3 UNIVERSAL GRIP CONFIGURATION GUIDE www.ottoexcellence.com Industrial Grips for Demanding Applications OTTO serves agriculture, construction, off-highway, material handling and specialized industrial
ZS4-D-CH Screw Clamp Terminal Blocks Component holder
Technical Datasheet SNK6090D00 Catalogue Page ZS4-D-CH Screw Clamp Terminal Blocks Component holder Protect your circuit with one N4007 diode. SNK64V004 SNK008F0000 3D CAD outline drawings available on
Datasheet. W-series terminal with clamping yoke connection WDU 2.5 RT
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
SIRIUS 3RU2 Thermal Overload Relays
Overview 1 2 3 4 6 1 2 NSB0_0207a Connection for mounting onto contactors: Optimally adapted in electrical, mechanical and design terms to the contactors. The overload relay can be connected directly to
ZS6-S Screw Clamp Terminal Blocks Disconnect with blade
Technical Datasheet SNK646D00 Catalogue Page ZS6-S Screw Clamp Terminal Blocks Disconnect with blade - Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver,
MOULDED CASE CIRCUIT BREAKERS BH630N, BH630S
MOULDED CASE CIRCUIT BREAKERS BH6N, BH6S F BH6N, BH6S COMMERCIAL INFORMATION Switching units, withdrawable device, plug-in device...f4 Switch-disconnector unit...f6 Connecting sets...f7 Mounting sets...f9