Standard!Hydraulic Cylinders affiliated with aadag group we can checkered lilies of the valley
|
|
- Hector Benson
- 5 years ago
- Views:
Transcription
1 StandardHydraulic Cylinders affiliated with aadag group we can checkered lilies of the valley IB.ING. GmbH Maschinenbau Stahlbau Hydraulik Phone +49(0)231 / 07-0 Fax +49(0)231 / GB IB.ING.
2 Request and Ordering System: Hydraulic cylinders Installation dimension in accordance with DIN ISO Series: 1 bar 2 bar 3 bar Mounting type: foot mounting = FU circular flange at the bottom = RB circular flange at the head = RK joint eye at the bottom = GB rod eye at the bottom = SB trunnion flange = SZ without mounting = OB Piston diameter (K ø): Piston rod diameter (KS ø): Stroke length (HL): in Design: screwed = A welded = B Damping: damped = D undamped = - Connection type (AA): inch thread = G metrical thread = M SAE-flange = F Coating (BE): chrome = Cr melt joining = SVB bronze = Bz Hydraulic medium (HM): On request: HFA HFC HLP HLP-E path measurement special sizes Ordering examples: Mounting IB Series type K ø KS ø HL Design Damping AA BE HM other IB 2 SB 45 0 A D G SVB HFA IB 1 RK 0 B - M Cr HLP affiliated with aadag group we can checkered lilies of the valley 1
3 Areas and Forces Series IB1 Area Ratio Area (cm 2 ) Force (kn) Piston Rod Ring Pressure Tension ,4 4,91 1,54 3,37 5, ,4,04 2,54 5, 13,79 1,43 12,5 3,, ,02 2 1,4 19,3,15 13, , ,4 31,1 10,17 20,9 33, ,4,24 15, 34,34 54, 5 1,4 7, 24,2 53, 12,21 1,4 1, 3,47 4, ,71 1 1,4,9 3,59 137, , 1,43 314,00 94,99 219,02 2 3,42 Theoretical calculation of the cylinder force of hydraulic cylinders: Mass Series IB1 Cylinder (kg) at At stroke length = 0 OB GB RK RB SZ kg ,5 -- 0,1 0,91 0,9 0,3 Stroke length , -- 1,2 1,45 1,5 0,5 -- 1, 2,42 2,4 3,00 0, ,7 3,7 4,13 4,77 1, ,73,53 7,13,13 1, ,4 12,20 12, 14,10 2, ,9 19, 20, 25,10 4,0 -- 2,2 34, 3, 45,20 7, 1 --,3 9,, 39,20 11,0 --,0 127,00,00 149,00 15,0 Remark: KS = Piston Rod affiliated with aadag group we can checkered lilies of the valley 2
4 Series IB1 OB M1x1,5 / /4 M10 M l 24,5 33, Dimensions IB1 OB L Remark: KS = Piston Rod, = Width Across Flat affiliated with aadag group we can checkered lilies of the valley 3
5 Series IB1 RB AS Piece ,0,0,0,0,0,0,0 ",5,5, d5, 9,0 11,0 13,5 17,5,0,0 17,5,0 2,0 -- M1x1,5 M1x1,5 -- / /4 /4 G 3/ Diensions IB1 RB l l7 l M M M1x1, M20x1, M5x1, Mx2 Remark: KS = Piston Rod, = Width Across Flat, AS = Number of Screws affiliated with aadag group we can checkered lilies of the valley 4
6 Series IB1 RK AS Piece ,0,0,0,0,0,0,0 ",5,5, d5, 9,0 11,0 13,5 17,5,0,0 17,5,0 2 d M1x1,5 M1x1,5 -- / /4 /4 G 3/ Dimensions IB1 RK 0 l l7 l M M M1x1, M20x1, M3x M2x M5x Mx2 Remark: KS = Piston Rod, = Width Across Flat, AS = Number of Screws affiliated with aadag group we can checkered lilies of the valley 5
7 Series IB1 SZ r 1,0 1,0 1,5 1,5 2,0 2,5 2,5 3,0 2,5 3, d M1x1,5 M1x1,5 -- / /4 /4 G 3/ M10 M12 M1x1,5 M20x1,5 M5x1,5 Mx l l7max Dimensions IB 1 SZ l7min l Remark: KS = Piston Rod, = Width Across Flat affiliated with aadag group we can checkered lilies of the valley
8 Areas and Forces Series IB Areas (cm 2 ) Forces (kn) Area Ratio Piston Rod Ring Pressure Tension 1,43 3,,7 21, 12,5 31, 2 1,9,1, 1,00 2 1,4,1 13,47 33, 19,3 49,10 3 2,0 10,1 9,45 23,5 3 1,4 10,1 20,99,45 21,17 77, 45 2,04 15, 15,27 3, ,4 15, 34,3,,2,5 5 1,9 24,3 25,3 4,10 5 1,4 24,3 53,91 134, 7,54 19,35 1,9 3,4,0,15 1,4 3,4 4,24,55 1,72, 2,0 3,2 59,10 147, 1, 3,2,32 5, 153,94 34, 2,04 7,54, 1, 1,4 7,54 1,,15 201,0 2, 1,,0 10,00 24, 1,,0 159,43 39, 254,47 3,17 1,93 1,72 131, 329,37 1,4 1,72 191,44 47,45 314,1 7,25 1 1,9 153,9 1,20 0,35 1 1, 153,9,20 55, 3,10 9, 1 2,12 201,00 179,10 447, 1 1,9 201,00 29, 724, 4, 17,20 1 2,0 251, 23, 591,00 1 1, 254, 31, 3,20 15, 1539, 2,04 314,10 1, 3, 1,4 314,10 4,10 15,20 4, , 0 1, 3,10 424,20 10, Theoretical calculation of the cylinder force of hydraulic cylinders: Remark: KS = Piston Rod affiliated with aadag group we can checkered lilies of the valley 7
9 Mass Series IB Cylinder (kg) per at stroke length = 0 stroke length FU RB GB SZ RK SB kg , , , , , , , , , , , , , , , , , , , , , , , , , , , , Remark: KS = Piston Rod affiliated with aadag group we can checkered lilies of the valley
10 Series IB2 FU h h1 b b / / /3 3/4 4/ / / / / / /1 1/1 1/1 1/ d d4 M1x1,5 M2x1,5 M35x1,5 M45x1,5 M5x1,5 M5x1,5 Mx2 Mx2 Mx2 Mx3 Mx3 M1x3 M1x Dimensions IB2 FU l l7 l / / / / / / / / / / / / / / Remark: KS = Piston Rod, = Width Across Flat affiliated with aadag group we can checkered lilies of the valley 9
11 Series IB2 RB d9 1/ 10 / 1 /3 3/4 1 4/ 205 / 245 / / 325 / 3 / 3 /1 4 1/1 4 1/1 0 1/ 0 d d d d4 M1x1,5 M2x1,5 M35x1,5 M45x1,5 M5x1,5 M5x1,5 Mx2 Mx2 Mx2 Mx3 Mx3 M1x3 M1x Dimensions IB2 RB l l7 l / / / / / / / / / / / / / / Remark: KS = Piston Rod, = Width Across Flat affiliated with aadag group we can checkered lilies of the valley 10
12 Series IB2 RK 1/ / /3 3/4 4/ / / / / / /1 1/1 1/1 1/ d d d d4 M1x1,5 M2x1,5 M35x1,5 M45x1,5 M5x1,5 M5x1,5 Mx2 Mx2 Mx2 Mx3 Mx3 M1x3 M1x l Dimensions IB2 RK l7 l / / / / / / / / / / / / / / Remark: KS = Piston Rod, = Width Across Flat affiliated with aadag group we can checkered lilies of the valley 11
13 Series IB2 GB W 7 7 ^ b b / / /3 3/4 4/ / / / / / /1 1/1 1/1 1/ d d4 M1x1,5 M2x1,5 M35x1,5 M45x1,5 M5x1,5 M5x1,5 Mx2 Mx2 Mx2 Mx3 Mx3 M1x3 M1x l Dimensions IB2 GB l7 l / ,5 2,0 2/ ,5 32,5 3 3/ ,0,0 45/ ,0,0 5/ ,0 2,5 / ,0,0 1 / ,0 2,0 1 / 5 1 2,0,0 1 / ,0 113,0 / ,0,0 0 1/ ,0 143,0 2 1/ ,0 1,0 2 1/ ,0 1,0 320 / ,0,0 Remark: KS = Piston Rod, = Width Across Flat affiliated with aadag group we can checkered lilies of the valley 12
14 Series IB2 SB b / / /3 3/4 4/ / / / / / d d4 M1x1,5 M2x1,5 M35x1,5 M45x1,5 M5x1,5 M5x1,5 Mx2 Mx2 Mx l l7 2,0 32,5,0,0 2,5,0 2,0,0 113,0,0 Dimensions IB2 SB l / ,5 2/ ,5 3 3/ ,0 45/ ,0 5/ ,0 / ,0 1 / ,0 1 / 5 1 2,0 1 / ,0 / ,0 Remark: KS = Piston Rod, = Width Across Flat affiliated with aadag group we can checkered lilies of the valley 13
15 Series IB2 SZ 1/ / /3 3/4 4/ / / / / / /1 1/1 1/1 1/ d d d4 M1x1,5 M2x1,5 M35x1,5 M45x1,5 M5x1,5 M5x1,5 Mx2 Mx2 Mx2 Mx3 Mx3 M1x3 M1x Dimensions IB2 SZ l l7 l m / / / / / / / / / / / / / / Remark: KS = Piston Rod, = Width Across Flat affiliated with aadag group we can checkered lilies of the valley 14
16 Areas and Forces Serie IB3 IB.ING. GmbH Maschinenbau Stahlbau Hydraulik Remark: KS = Piston Rod Area Ratio Areas (cm 2 ) Force (kn) A K /A R Piston Rod Ring Pressure Tension 2 1,9 12,5,1, 43,9, 3 2,0 19,3 10,1 9,45,71 33, ,04 31,17 15, 15,27 109,10 53,45 5 1,9,2 24,3 25,3 1,91 9,71 1,9 7,00 3,4,0 274,9 1,21 2,0 1,72 3,2 59,10 429, 20, 1 2,04 153,94 7,54, 53,79 23, 1 1, 201,0,0 10,00 3,71 371,00 1 1,93 254,47 1,72 131, 3,5 41,13 1 1,9 314,1 153,9 1, ,5 5, 0 1 2,12 3,10 201,00 179,10 13, 2, 2 1 2,0 4, 254, 23, 171,10 27, 2 2,04 15, 314,10 1, 2, , , 4,20 3,10 424,20 214, 144, Theoretical calculation of the cylinder force of hydraulic cylinders: Mass Series IB3 Remark: KS = Piston Rod Cylinder (kg) per at stroke length = 0 Stroke length (kg) FU RB GB SZ RK SB , , , , , , , , , , , , , ,3 affiliated with aadag group we can checkered lilies of the valley 15
17 Series IB3 FU h h b b d d4 M2x1,5 M35x1,5 M45x1,5 M5x1,5 M5x1,5 Mx2 Mx2 Mx2 Mx3 Mx3 M1x Dimensions IB3 FU l l7 l Remark: KS = Piston Rod, = Width Across Flat affiliated with aadag group we can checkered lilies of the valley 1
18 Series IB3 RB AS Piece ",0,0,0,0,0,0,0,0,5,5,5,5,5 15, d d d7 13,,5 13,5 17,5 17,5,0 2,0,0,0 3,0 3,0 39,0 45,0 45,0 45,0 d Dimensions IB3 RB d4 l l7 l M2x1, M35x1, M45x1, M5x1, M5x1, Mx Mx Mx Mx Mx M1x Remark: KS = Piston Rod, = Width Across Flat, AS = Number of Screws affiliated with aadag group we can checkered lilies of the valley 17
19 Series IB3 RK AS Piece 12 ",0,0,0,0,0,0,0,0,5 45,5 45,5 45,5 45, , d d d7 13,5 13,5 17,5 17,5,0 2,0,0,0 3,0 3,0 39,0 45,0 45,0 45,0 d Dimensions IB3 RB d4 l l7 l Piston Ø M2x1, M35x1, M45x1, M5x1, M5x1, Mx Mx Mx Mx Mx M1x Remark: KS = Piston Rod, = Width Across Flat, AS = Number of Screws affiliated with aadag group we can checkered lilies of the valley 1
20 Series IB3 GB W b b d d4 M2x1,5 M35x1,5 M45x1,5 M5x1,5 M5x1,5 Mx2 Mx2 Mx2 Mx3 Mx3 M1x l Dimensions IB3 GB l7 l , , , , , , , , , , , , , ,0 Remark: KS = Piston Rod, = Width Across Flat affiliated with aadag group we can checkered lilies of the valley 19
21 Series IB3 SB b Mm 3 4 d5 35 d4 M2x1,5 M35x1,5 M45x1,5 M5x1,5 M5x1,5 Mx2 Mx2 Mx2 Mx l l7 34,0,0,0 2,5,0 2,0,0 113,0,0 143,0 Dimensions IB3 SB l Remark: KS = Piston Rod, = Width Across Flat affiliated with aadag group we can checkered lilies of the valley 20
22 Series IB3 SZ d d d4 M2x1,5 M35x1,5 M45x1,5 M5x1,5 M5x1,5 Mx2 Mx2 Mx2 Mx3 Mx3 M1x l Dimensions IB3 SZ l7 l Remark: KS = Piston Rod, = Width Across Flat affiliated with aadag group we can checkered lilies of the valley 21
23 Rod Eye () d 1 d 2 d 3 d 4 l 1 l 2 l 3 l 4 b 1 b 2 W Mass Order Series 2 Series 3 (kg) Reference M1x1, ,43 IBGK , IBGK M2x1, ,10 IBGK3 3 M35x1, ,00 IBGK4 M45x1, , IBGK5 M5x1, , IBGK 1 M5x1, , IBGK7 1 1 Mx ,20 IBGK 1 1 Mx , IBGK9 1 Mx , IBGK10 0 Mx , IBGK Mx , IBGK M1x , IBGK M1x ,00 IBGK M1x ,00 IBGK Mx ,00 IBGK1 affiliated with aadag group we can checkered lilies of the valley
24 Swivel Head () d 1 d 2 d 3 d 4 l 1 l 2 l 3 l 4 b Mass Order Series 2 Series 3 (kg) Reference M1x1, ,43 IBSK , IBSK M2x1, ,10 IBSK3 3 M35x1, ,00 IBSK4 M45x1, , IBSK5 M5x1, , IBSK 1 M5x1, , IBSK7 1 1 Mx ,20 IBSK 1 1 Mx , IBSK9 1 Mx , IBSK10 0 Mx , IBSK Mx , IBSK M1x , IBSK M1x ,00 IBSK M1x ,00 IBSK Mx ,00 IBSK1 affiliated with aadag group we can checkered lilies of the valley 23
25 Thermal Spraying The solution for your corrosion and wear problems Procedure Self-fluxing metal powders on the base of NiCrBSi are catapulted in an acetylene-oxygen flame on the prepared material surface and are melted down inductively afterwards. Application Mandrels, molds, pistons, piston rods, kneaders, fans, mixer blades, gauges, plungers, pump shafts, pump- and turbine blades, rolls, stamps, rollers, shaft protective sleeves. Advantages - Low friction coefficient upon metallic sliding friction - good emergency running characteristics - resistant to roll, sliding, and steel wear - corrosion resistant to water, (warm and cold industrial water, drinking water, seawater) weather effects, industrial atmospheres, diluted sulphuric or phosphoric acids, formic and acetic acids as well as sodium hydroxide - resistant to compressive stress and impact stress - oxidation- and scale resistant - for operating temperatures up to 0 C Technical Data - Chemical composition: C 0,44 %, Si 3,43 %, Cr 10,5 %, Fe 2, % B 1, %, Ni 1,2 % - layer thickness: 0 µm, depending on customer requirement - the hardness of the coating is 0 +/- HV 1, (for maximal pressure hard coatings up to 72 HRC can be applied) - Surface roughness: Ra 0,1 to 0, µm affiliated with aadag group we can checkered lilies of the valley 24
26 Quality DIN EN ISO 01: The shareholders of IB.ING. Ltd. consider product quality one of the most important factors to be considered in building up good customer relations and to differentiate oneself from competitors. Following the premise The customer shall return, not the product IB.ING. has established a quality assurances system, which does more than simply meet highest requirements according to DIN- standards. The central goal is to always exceed all customer expectations. The company has been certified according to DIN EN ISO 01: (first certified in 199). affiliated with aadag group we can checkered lilies of the valley 25
27 References affiliated with aadag group we can checkered lilies of the valley 2
28 Partners affiliated with aadag group we can checkered lilies of the valley 27
29 Contact Carl-Still-Str D-4559 Recklinghausen Germany Phone: +49(0)231 / 07-0 Fax: +49(0)231 / info@ib-ing.de Jürgen Prautzsch Management Tel.:+49(0)231/07"0 E"Mail:juergen.prautzsch@ib-ing.de Frank Leibner Operating Manager Tel.:+49(0)231/07"34 E"Mail:frank.leibner@ib-ing.de Jürgen Meister Sales Tel.:+49(0)231/07"42 E"Mail:juergen.meister@ib-ing.de Michael Sonnenfeld Construction Tel.:+49(0)231/07"44 E"Mail:michael.sonnenfeld@ib-ing.de Stefanie Krzoska Purchasing Tel.:+49(0)231/07"2 E"Mail:stefanie.krzoska@ib-ing.de affiliated with aadag group we can checkered lilies of the valley 2
Hydraulic cylinders type CN - round heads with counterflanges to ISO nominal pressure 16 MPa (160 bar) - max 25 MPa (250 bar)
www.atos.com Table B80-/E Hydraulic cylinders type CN - round heads with counterflanges to ISO 600- - nominal pressure 6 MPa (60 bar) - max MPa (0 bar) SWC Cylinders Designer Software for assisted selection
More informationHydraulic cylinders type CC - round heads with counterflanges to ISO nominal pressure 25 MPa (250 bar) - max 32 MPa (320 bar)
www.atos.com Table B-/E Hydraulic cylinders type CC - round heads with counterflanges to ISO 60 - nominal pressure MPa (0 bar) - max MPa (0 bar) SWC Cylinders Designer Software for assisted selection of
More informationStandard Cylinder Series SZ 100
Standard Cylinder Series SZ 100 Maximum operating pressure up to 100 bar Choice of 13 different piston sizes between 12 und 200mm and 23 different attachments Rugged yet compact design with good guiding
More informationSINGLE ACTING METRIC RANGE
CONTENTS Page 2 General specifications Ram Style No. Female Rod Male Rod Pin Hole 3 Part Numbering System 4 Dimensions 5 Buckling Calculations 6 Buckling Force/ Graphs 7 Load Calculations 8 PBV Flow Chart
More informationDOUBLE ACTING METRIC RANGE
CONTENTS Page 2 General specifications Ram Style No. Female Rod Male Rod 3 Part Numbering System 4 Basic Dimensions 5 Load Calculations 6 Load Calculations 7 Buckling Calculations 8 Buckling Calculations
More informationIntermot Hydraulic Motors. Drum Brakes RC Series
Intermot Hydraulic Motors Drum Brakes RC Series TECHNICAL CATALOGUE INDEX General information Pag. 10 Technical data Pag. 14 Dimensional drawings Pag. 15 Ordering instructions Pag. 17 9 Hydraulic fluids
More informationHydraulic cylinders type CH - big bore sizes to ISO nominal pressure 16 MPa (160 bar) - max 25 MPa (250 bar)
www.atos.com Table B60-6/ Hydraulic cylinders type CH - big bore sizes to ISO 600- - nominal pressure 6 MPa (60 bar) - max 5 MPa (50 bar) SWC Cylinders Designer Software for assisted selection of Atos
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationGENERAL INFORMATION HYDRAULIC MOTORS ITALY
GENERAL INFORMATION INTERMOT produces RADIAL PISTON since 1985: our yearly production is more than 13.000 units which we sell all over the world through our agents and authorized sellers. Our motor range
More informationHYDRAULIC-MOTORS. Radial Piston Motors with fixed displacement RM...X series V g = 250 cm 3 /rev cm 3 /rev
s with fixed displacement RM...X series V g = 250 cm 3 /rev - 900 cm 3 /rev HYDRAULIC-MOTORS Catalogue No. HM1-015E RM 250X - RM 900X Page 2 Features: many displacements for all applications very high
More informationHYDRAULIC CYLINDER HYKS
HYDRAULIC CYLINDER HYKS INTRODUCTION The hydraulic cylinder, as a link between hydraulic control and the machine, is suitable for use in many areas of industry, such as pressing and joining applications,
More informationZBD 1001 Differential Cylinder Data sheet 04.16/DS13210
ZBD 1001 Differential Cylinder Data sheet 04.16/DS13210 Description: This series represents the logical and consistent supplementation of already ISO 6022 (250 bar) and ISO 6020/1 (160 bar) standard series.
More informationLow friction, low wear: The Fast and Slow Motion Specialist iglidur J
Low friction, low wear: The Fast and Slow Motion Specialist iglidur Over 250 sizes available from stock Low wear against different shaft materials Low coefficients of friction running dry Vibration dampening
More informationHydraulic Caliper Disc Brakes SFRA 5
BRAKE SYSTEMS FOR WIND ENERGY Rotor Brake (active) Hydraulic Caliper Disc Brakes SFRA 5 25 PINTSCH BUBENZER is certified according to DIN EN ISO 9001:2000 SFRA 5 (µ = 0,4) SFRA 5 (µ = 0,3) SFRA 5 (µ =
More informationZBD 2512 Differential Cylinder Data sheet 07.16/DS13660
ZBD 2512 Differential Cylinder Data sheet 07./DS Description: The STORZ hydraulic cylinder series ZBD 2512 for the nominal pressure of 250 bar is replaceable with the CDH1 series. By fixing the mounting
More informationDSE /117 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SERIES 11 SUBPLATE MOUNTING ISO p max 350 bar Q max 40 l/min
83 2/117 ED DSE3 DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SUBPLATE MOUNTING ISO 41-3 p max 3 bar Q max l/min MOUNTING SURFACE OPERATING PRINCIPLE ISO 41-3-2-- (CETOP 4.2-4-3-3). 33 3.2 21. 12.7.1.7
More informationand spring operated multiple-disk disc brakes FDLB, LB
Pressure Hydraulically released released and spring operated multiple-disk disc brakes FDLB, LB KWN 01 Couplings from Dresden / Germany By specialists for specialists general information external body
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More informationISO cartridge valves type LIDD and LIQV Flow control, ISO 7368 sizes 16 63
Table H004/E ISO cartridge valves type LIDD and LIQV Flow control, ISO 78 sizes LIDD LIQV/K LIDD and LIQV are flow control valves not compensated, in ISO cartridge design, made by a functional cover and
More informationSITEMA PowerStroke. Technical Information TI-P11. 1 Function. 2 Applications. Mould Closing Devices series FSK. Contents
SITEMA PowerStroke FS ocking, actuating and releasing by hydraulic pressure English translation of German original Technical Information TI-P11 SITEMA PowerStroke Mould Closing Devices series FS TI-P11-EN-01/016
More informationStandard Norm Cylinder DIN 24554
Standard Norm Cylinder DIN 24554 Maximum operating pressure up to 160 bar Choice of 10 different piston sizes between 25 and 200mm with 2 different rod diameters and 4 different attachments each Rugged,
More informationEIPS2 INTERNAL GEAR PUMPS
EIPS2 INTERNAL GEAR PUMPS Internal gear pump Type with constant displacement volume Characteristics Internal gear pump with axial and radial gap compensation Radial compensation with segments Pressure
More informationSITEMA PowerStroke. Technical Information TI-P12. 1 Function. 2 Applications. Mould Closing Devices series FSKP. Contents. Technical Information
Technical Information SITEMA PowerStroke FSP ocking, actuating and releasing by pneumatic pressure TI-P1-EN-0/016 English translation of German original Technical Information TI-P1 SITEMA PowerStroke Mould
More informationPlate Heat Exchangers
Plate Heat Exchangers General Plate heat exchangers are used wherever thermal energy (heat) has to be transferred from one fl uid to another. The advantage is that they can maintain the fl uid temperature
More informationSCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
More informationReturn line and Suction Boost Filter RKM
Return line and Suction Boost Filter up to 850 l/min, up to 10 bar 80 100 120 151 201 251 201/-TH 300 350 400 800 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed
More informationB e n t a x i s hydraulic motors. MSeries
B e n t a x i s hydraulic motors MSeries Contents Definition and main applications of hydraulic motors, advantages of HYDRO LEDUC motors.............. 1 Operating conditions of motors... 2 Determining
More informationBOCCOLE ERNESTO RAAB SRL
C A BOCCOLE T A L O G O NESTO RAAB SRL Via Ghisalba,3-2002 Ospiate di Bollate (MILANO) Tel.: 023830375 - Fax : 0238303207 http://www.ernestoraab.it e-mail: cuscinetti@ernestoraab.it Internal clearance
More informationMOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
More informationP1E Series ISO Cylinders
High fibre nitrile Combined cushion/ Aluminium tube to Zinc diecast end plates Retained cushion piston rod seal non return seal for give high strength on 32, & 50mm bore adjusting screw allows a and polyurethane
More informationHydraulic Piston Accumulators
1. DESCRIPTION 1.1. FUNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas (nitrogen) is utilised in hydropneumatic accumulators for storing
More informationTechnical Data Sheet TI-F55 Locking Units series KFHS (with DGUV approval)
English translation of German original Technical Data Sheet TI-F55 Locking Units series KFHS (with DGUV approval) For a detailed functional description refer to Technical Information TI-F10. Further important
More informationEIPC3 EIPC5 INTERNAL GEAR PUMPS EIPC5 NEW!
EIPC3 EIPC5 INTERNAL GEAR PUMPS new Generation EIPC new technology up to 320 bar industrial version aluminium housing noise-optimized multi-flow-pumps with common suction port NEW! EIPC5 Internal gear
More informationiglidur J The Fast and Slow Motion Specialist
iglidur The Fast and Slow Motion Specialist Used in long-life applications, also with soft shafts. The iglidur plain bearings are designed for the lowest coefficients of friction while running dry and
More informationPiston Accumulators. SK Series 28 INNOVATIVE FLUID POWER. Piston Accumulators. Piston Types. Description. Construction.
SK Series Piston Accumulators Piston Types TYPE 2 Without heck Valves Application (without heck Valve) Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number
More informationPiston Accumulators High pressure
Piston Accumulators High pressure 1. DESCRIPTION 1.1. FUNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas is utilised in hydraulic accumulators
More informationMetric Hydraulic Cylinders Series HMI
Series HMI Conforms to ISO 600/ (99) or working pressures up to 0 bar Vital Technologies for Motion and Control or Cylinder Division Plant Locations See Page II. 05 As the world leader in the design and
More informationHYDRAULIC CYLINDER HYC
www.hydropa.de HYDRAULIC CYLINDER HYC www.hydropa.de INTRODUCTION The hydraulic cylinder, as a link between hydraulic control and the machine, is suitable for use in many areas of industry, such as pressing
More informationEIPC3 EIPC5 EIPC6. Internal gear pumps. eckerle.com
EIPC3 EIPC5 EIPC6 Internal gear pumps eckerle.com Internal gear pump Type EIPC3 for industrial applications with constant displacement volume EIPC3 Characteristics Internal gear pump with axial and radial
More informationPiston Accumulators High pressure
Piston Accumulators High pressure 1. DESCRIPTION 1.1. FUNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas is utilised in hydraulic accumulators
More informationLow wear on all shafts: The Marathon Runner iglidur W300
iglidur Low wear on all shafts: The Marathon Runner iglidur Over 400 sizes available from stock For especially long service life Low coefficient of friction Extremely high wear resistance Also suitable
More informationSteering unit LAGC. Data sheet
Steering unit LAGC Data sheet Nominal sizes Series Maximum flow HE 14365 / 09.2017 40 1000 1 x and 2 x 80 l / min 2 LAGC HE 14365 / 09.2017 Page Content 4 4 5 6 7 8 9 10 11 12 13 14 Features Ordering details
More informationBENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO HPM. pag.3
ENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO 3019-2 HPM pag.3 TECHNICAL FEATURES ENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO 3019-2 TECHNICAL FEATURES Displacement cm 3 /rev 12 17 25 34 40 47 55 64 80
More informationDL /116 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SERIES 10 SUBPLATE MOUNTING ISO p max 320 bar Q max 125 l/min
41 330/116 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO 4401-05 p max 320 bar Q max 125 l/min MOUNTING INTERFACE OPERATING PRINCIPLE ISO 4401-05-04-0-05 (CETOP 4.2-4-05-320)
More informationSuction Filter SF/SFM/SFF and Suction Filter Elements S/S..
Suction Filter /M/F and Suction Filter Elements S/S.. up to 500 l/min Filters: 60 110 160 240 330 M 330 F 400 F 500 Elements: S SH. SU. SG. 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The
More informationMOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
More informationBlock mounting filter, for lateral flange-mounting
Block mounting filter, for lateral flange-mounting RE 51419/2.1 1/18 Type 35PSFN4 to 1; 35PSF13, 15 Size according to DIN 2455: 4 to 1 Additional sizes: 13, 15 Nominal pressure 35 bar [579 psi] Port up
More informationFixed Displacement Bent Axis Axial Piston Motors TMB 700
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001:2015-14001:2015 ISO 9001:2015 Certificate N 12-Q-0200545-TIC ISO 14001:2015 Certificate N 12-E-0200545-TIC
More informationMWA /MWB Roundline Cylinders
MWA /MWB For working pressures up to and bar Catalogue HY7-/UK June Catalogue HY7-/UK Introduction Standard MW Cylinders Parker's MW range of cylinders is designed for medium and heavy duty industrial
More informationSCM DIN. Other advantages:
SCM 012-130 DIN SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design
More informationBlock mounting filter, for lateral flange-mounting
Block mounting filter, for lateral flange-mounting RE 51418/12.1 Replaces: 1.1 1/18 Type 245PSFN4 to 4; 245PSF13, 15 Size according to DIN 2455: 4 to 4 Additional sizes: 13, 15 Nominal pressure 25 bar
More informationHydraulic cylinder Type CDL1
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics RE 17 325/01.03 Replaces: 07.02 Hydraulic cylinder Type CDL1 Series
More informationARMA BAĞLANTI SİSTEMLERİ A.Ş.
ARMA BAĞLANTI SİSTEMLERİ A.Ş. ARMA FIXING SYSTEMS, initially established as a molding workshop in 1980, is an innovative and dynamic company serving its customers in various sectors primarily automotive,
More informationBlock mounting filter, for vertical flange-mounting
Block mounting filter, for vertical flange-mounting RE 51417/12.1 Replaces: 7.1 1/18 Type 45PBFN4 to 1; 45PBF13, 15 Size according to DIN 2455: 4 to 1 Additional sizes: 13, 15 Nominal pressure 45 bar [653
More informationIndustrial Components. Internal gear pumps DHPH2, DHPH3, DHPH5, DHPH6
Industrial Components Internal gear pumps DHPH2, DHPH3, DHPH5, DHPH6 Internal gear pump Type DHPH2 high pressure pump with constant displacement volume Characteristics Internal gear pump with axial and
More informationTorque overview for series 10 / 22 / 35 / 40 / 51
Content 1. General... 3 2. General screw torque for metric screws... 4 3. Mounting torque series 10 plug locking sleeve... 5 3.1. Mounting torque series 10 fastening / jam nut... 5 3.2. Mounting torques
More informationHydraulic cylinders Tie rod design. Type CD70 / CG70. Features. Contents
Hydraulic cylinders Tie rod design Type CD / CG Features types of mounting Piston Ø (ØAL)... mm Piston rod Ø (ØMM) 12... 1 mm Stroke length up to 3 m Project planning software Interactive Catalog System
More informationBlock mounting filter, lateral flange-mounting possible
Block mounting filter, lateral flange-mounting possible RE 0/.0 Replaces: 0.09 / Types 0/0 FEN 000 to 000; 0/0 FE 000, 00, 008 Nominal sizes according to DIN 0: 000 to 000 Nominal sizes according to BRFS:
More informationMOTORS M HYDRAULIC MOTORS
MOTORS M HYDRAULIC MOTORS T E C H N I C A L C A T A L O G Fixed displaced axial piston motors POCLAIN HYDRAULICS Displacement cm³/rev [in³/rev.] M0 M1 M2 M3 From 7,07 [0.43] to 17,84 [1.09] From 9,08 [0.55]
More informationIndustrial Components. Internal gear pumps DHPC3, DHPC5, DHPC6
Industrial Components Internal gear pumps DHPC3, DHPC5, DHPC6 Internal gear pump Type DHPC3 for industrial applications with constant displacement volume Characteristics Internal gear pump with axial and
More informationTorque overview for series 10 / 22 / 35 / 40 / 51
Content 1. General 3 2. General screw torque for metric screws 4 3. series 10 plug locking sleeve 5 3.1 series 10 fastening / jam nut 5 3.2 s series 10 locking sleeve for GISMA endbells 6 3.3 s series
More informationIntermot Hydraulic Motors. Brakes
Intermot Hydraulic Motors Brakes TECHNICAL CATALOGUE INDEX DISK BRAKES Pag. 2 DRUM BRAKES Pag. 9 1 Intermot Hydraulic Motors Disk Brakes F Series TECHNICAL CATALOGUE INDEX F21R F21DR Pag. 3 F80 F80S Pag.
More informationSeries 249 and 249N Swivels
Series 249 and 249N Swivels l Features Strong, durable, versatile swivels specifically designed for the rigorous demands of closed-loop servohydraulic testing applications Series 249 swivels are available
More informationPortable Hardness Tester TIME Ultrasonic Contact Impedance (UCI) Method
Portable Hardness Tester TIME5620 -Ultrasonic Contact Impedance (UCI) Method Larger, clear screen displays probe information, battery information, the average, maximum, minimum readings of select hardness
More informationHigh-Pressure Plunger Pumps ARP -Line 150 ARP 250 ARP 400 ARP 550 ARP 700 ARP 1000 ARP
High-Pressure Plunger Pumps ARP -Line 150 ARP 250 ARP 400 ARP 550 ARP 700 ARP 1000 ARP High-Pressure Plunger Pump Type 150 ARP 200 211 133 255 331 340 250 manometer connection mounting space G 1 1/4 62
More informationSeries T6W Welded Construction Hydraulic Cylinders
Series T6W Welded Construction Hydraulic Cylinders Description Series T6W hydraulic cylinders are available in Industrial and Marine specifications, they are of a heavy duty welded construction and are
More informationcyber force motors linear actuators
cyber motor cyber force motors linear actuators reliable compact precise Your Applications WITTENSTEIN Products that know no limits Joining Electromechanical cylinder with high accuracy for mating and
More informationB e n t a x i s hydraulic motors. MSeries
B e n t a x i s hydraulic motors MSeries Contents Definition and main applications of hydraulic motors, advantages of HYDRO LEDUC motors.............. 1 Operating conditions of motors... 2 Determining
More informationHydraulic cylinder, mill type
Hydraulic cylinder, mill type RE 17338/07.13 Replaces: 07.12 1/74 Series CDH3 / CGH3 / CSH3 Component series 3X Nominal pressure 350 bar (35 MPa) Table of contents H4645_d Contents Features 1 Technical
More informationTECHNICAL INFORMATION
General Nomenclature Spherical Roller Bearings The spherical roller bearing is a combination radial and thrust bearing designed for taking misalignment under load When loads are heavy, alignment of housings
More informationVSK. Functional Description HA /2008. Constant Flow - Control Valves VSK4 VSK2 VSK2 VSK4. Replaces HA /2000
Constant Flow - Control Valves VSK HA 5 5/008 Size 06 p max up to 0 bar Q max up to 0 L/min Replaces HA 5 /000 Wide range of throttling oriffices VSK4 Two models: - cartridge - screw-in cartridge valve
More informationCollet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний "Штрай" Москва, ул. Островитянова, 13
Collet chucks KSZ-MB Collet chuck Power operated collet chucks for bar machining quick collet change Page 148 KSZ-DZ Draw collet chuck for bars KSZ-AZ Draw collet chuck with workstop Page 152 Page 155
More informationISO/VDMA Series ISO 6431 and VDMA Cylinder Line
ISO/VDMA Series ISO 6431 and VDMA 24562 Cylinder Line www.asco.com Table of Contents ISO/VDMA Series Features and Benefits 2 How to Order 3 Technical Information 4 Dimensions Tie-Rod Version 5 Mounting
More informationDescription. Piston rod end. Technical data. Datasheet Type 46 Single rod cylinder according to ISO 6022 / DIN 24333
CE CV LE MM KF MM KK Datasheet Type 46 Single rod cylinder according to ISO 6022 / DIN 24333 Description - Standard cylinder to ISO 6022, DIN 24333 - Strokes up to 2000 mm - Piston diameter: 40 320 mm
More informationhotrod Cartridge Heaters Application Fields
For heating applications: - Packaging machines - Extruders - Casting machines - Hot melt - Cutting knives - Analytical equipment in laboratories Custom options: - Power distribution - Numerous attachments
More informationTank top return-line filter Pi 5000
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Tank top return-line filter Pi 5000 Nominal size 160 up to 00 according to DIN 24550 1. Features
More informationSealing surface pressure and bolt force
Printed in Germany 04/06 39-00004-01 REINZ-Dichtungs-GmbH Reinzstraße 3-7 89233 Neu-Ulm Deutschland Phone +49(0) 731-7046-777 Fax +49(0) 731-7046-399 www.reinz.com Sealing surface pressure and bolt force
More informationInternal Gear Unit. for motor/pump function Series QXM. Reference: 100-P US-10 1/18. Issue:
Internal Gear Unit for motor/pump function Series QXM Reference: 1-P-63-US-1 Issue: 1.218 1/18 2/18 1-P-63-US-1/1.218 Contents Page 1 General... 5 1.1 Product description... 5 1.2 Advantages... 5 1.3 Application...
More informationHydraulic Pump Series F1plus Fixed Displacement
Fixed Displacement Catalog 9129 8218-02 February 1999, GB Content General information, design 3 Specifications 4 Pump cross section 4 Pump and line selection 5 Ordering code 6 Standard versions 6 Installation
More informationEIPH2 EIPH3 EIPH5 EIPH6
EIPH2 EIPH3 EIPH5 EIPH6 Internal gear pumps eckerle.com Internal gear pump Type EIPH2 high pressure pump with constant displacement volume EIPH2 Characteristics Internal gear pump with axial and radial
More informationSeries HOL-W Welded Construction Hydraulic Cylinders
Series HOL-W Welded Construction Hydraulic Cylinders Description Series HOL-W hydraulic cylinders are available in Industrial and Marine specifications, they are of a heavy duty welded construction and
More informationHigh-pressure inline filter, flangeable
High-pressure inline filter, flangeable RE 51405/08.08 1/1 Types FEN 0040 to 1000; FE 0003, 0015, 0018 Nominal size according to DIN 4550: 0040 to 1000 Nominal size according to BRFS: 0003, 0015, 0018
More informationWatz Hydraulik Your specialist for customised and standard hydraulic products
Watz Hydraulik Your specialist for customised and standard hydraulic products About Watz Hydraulik Contents 2 About Watz Hydraulik 3 Watz engineering 4 Hydraulic cylinders 7 Hydraulic systems 8 Control
More informationSteering unit LAGZ. Data sheet. Series 2 x
Steering unit LAGZ Data sheet Nominal sizes 125 620 Series 2 x Maximum flow 50 l / min HE 11868 / 09.2017 2 LAGZ HE 11868 / 09.2017 Page Content 4 4 5 6 7 8 9 10 11 12 13 14 Features Ordering details Function,
More informationPressure relief valve, pilot-operated. Type ZDB and Z2DB. Contents. Features. RE Edition: Replaces: 10.05
Pressure relief valve, pilot-operated Type ZDB and ZDB RE 575 Edition: 06- Replaces: 0.05 Size 6 Component series 4X Maximum operating pressure 35 bar Maximum flow 60 l/min H7746 Features Sandwich plate
More informationOil/air cooler BLK. Fluidcontrol
Fluidcontrol Oil/air cooler BLK Drives and hydraulic aggregates are used in machine construction, raw material production, maritime and many other areas. In hydraulic systems oil transfers power and motion,
More informationSeries 09SVP Single Axis Valve Gate Nozzle
Series 09SVP Single Axis Valve Gate Nozzle Stabilize your Process CAT-01-0065_EN-Rev03 EN 01 / 2018 Product Description - Technical Data NOTICE Valve Pin Operation Operation medium Pressure range Flowrate
More informationFiltrec elements are tested according to ISO 2941, ISO 2942 and ISO 23181
Common HYDRAULIC FILTRATION Side wall mounting suction filters Technical Information Connection Ports: 1-1 1/4-1 1/2 BSP (other thread options on request) 1 1/2 SAE J518-3000/M12 Housing Materials: Cover:
More informationTraction Gas Springs GZ-15 to GZ-40 (Pull Type)
Traction Gas Springs GZ- to GZ-40 (Pull ) Industrial traction gas springs are maintenance-free and ready to install. They are available ex-stock with body diameters from to 40 and forces from N to 000
More informationNDA-25B MKI Fast Rescue Boat Davit
NDA-25B MKI Fast Rescue Boat Davit Norsafe AS P.O. Box 115 N-4852 Faervik, Norway Norsafe Project No.: TBA Norsafe Doc. No.: TSD-0039 Rev. Date: 14.11.2016 Rev. No: 2 Tel: +47 37 05 85 00 Fax: +47 37 05
More informationAxial piston variable pump A4VG Series 32. Europe. RE-E Edition: Replaces:
Axial piston variable pump A4VG Series 32 Europe RE-E 92003 Edition: 04.2016 Replaces: 06.2012 High-pressure pump for applications in a closed circuit Size 28 to 125 Nominal pressure 400 bar Maximum pressure
More informationLHW-3P Load Holding Valve Winch
Table of Content 1 General Description... 2 1.1 Applications... 2 1.2 Mounting Location (Recommendation)... 2 1.3 Function... 2 1.4 Characteristics... 2 2 Technical Data... 3 3 Ordering Information...
More informationCONTENTS. General information Ordering example: Guide pillar Guide bush Ball bearing cage Strokes 32.
CONTENTS Pages General information.02 Ordering example:.04 Guide pillar.05 Guide bush.06 CA EB BA HB JB NB GB Ball bearing cage.07 PA Strokes.08 Clamp positions.09 Demountable pillar.10 EPO Middle pillar.11
More informationDR magnetic piston. Compact Magnetic Sophisticated
DR magnetic piston Compact Magnetic Sophisticated DR Magnetic piston Compact Magnetic Sophisticated Guiding area Magnet Steel disc Spring space for single-acting cylinders Static sealing area Cushioning
More informationGLOBAL STANDARD COOLER
GLOBAL STANDARD COOLER A A OIL-to-AIR COOLING SYSTEMS WITH AC-MOTOR Product Information AKG-Line is a standard line of products from the market leader in high performance aluminium cooling systems. AKG
More informationLKI LKI-HYD COOLING. Series. advanced quality customized designs made in europe. Oil/Air heat exchangers. Low noise level. High performance.
advanced quality customized designs made in europe Oil/Air heat exchangers Series LKI For industrial use LKI-HYD For mobile use OIL-AIR COOLING Low noise level High performance Low cost The cut-away perspective
More informationAxial Piston Pump Series PV Design 45 Variable Displacement. Catalogue HY /UK February 2007
Design 45 Variable Displacement February 2007 Introduction With thru drive for single and multiple pumps Swash plate type for open circuit Technical Features Low noise level Fast response (eg. PV046: upstroke
More informationV160C. Mould Hydraulic Systems. Hydraulic cylinders-iso 6020/2 compact 160 bar V160C
V160C Mould Hydraulic Systems Hydraulic cylinders-iso 6020/2 compact 160 bar V160C V160Ccat.GB01-2006 Hydraulic cylinders-iso 1 2 Chrome-plated steel rod, hardened or tempered and polished. Thickness of
More informationDL /118 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO p max 280 bar Q max 50 l/min
41 211/118 ED DL3 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO 4401-03 p max 280 bar Q max 50 l/min MOUNTING SURFACE OPERATING PRINCIPLE ISO 4401-03-02-0-05 (CETOP
More informationPressure control valves type AGIR, AGIS, AGIU two stage, subplate mounting, ISO 5781 sizes 10, 20 and 32
Table C0701/E Pressure control valves type AGIR, AGIS, AGIU two stage, subplate mounting, ISO 5781 sizes 10, 20 and 32 AGIRR20/***/V AGIU10/11...E Two stage pressure control valves with balanced poppet
More information