STANDARD DESIGN SHIELDS AND CONTACTS
|
|
- Nelson Heath
- 6 years ago
- Views:
Transcription
1 S ONE-PIECE Off the Shelf, On Spec and On Budget One-piece standard surface mount shields offer six sides of protection, with the sixth side being the board itself. One-piece designs offer economical shielding protection where access to covered components is not necessary. There are no tooling costs associated with either the one and/or two-piece design. S TWO-PIECE Reduce Board Damage From Inspection and Repairs Two-piece standard surface mount shields offer users the flexibility to inspect or repair shielded components without risking board damage by removing the entire shield or incurring tooling costs. Covers snap on and off with ease, which makes repair of the component under the shield quicker and easier and reduces board re-work. Two-piece shields are available unassembled* and are designed to survive drop, shock and no-rattle tests. *Pre-assembly is an option. Consult sales. STANDARD ONE-PIECE BOARD LEVEL SHIELDS BMI-S-101 BMI-S-102 BMI-S-103 BMI-S-104 BMI-S-106 BMI-S-105 BMI-S-107 LENGTH.538 (13,66).650 (16,50) (26,21) (32,00) (36,83) (38,10) (44,37) OVERAL.476 (12,10).650 (16,50) (26,21) (32,00) (33,68) (25,40) (44,37).100 (2,54).142 (3,60).384 (9,75) TAPE STANDARD TWO-PIECE BOARD LEVEL SHIELD FRAMES LEGNTH TAPE S PER WEIGHT 24 mm 20 mm g 32 mm 24 mm g 44 mm 32 mm g 44 mm 36 mm g 56 mm 40 mm g 56 mm 32 mm g 56 mm 56 mm g TAPE TAPE S PER TYPICAL PROPERTIES & PERFORMANCE - ALL S PROPERTY TEST METHOD RESULT Co-planarity LTWI-1119 <0,10 mm Solderability ANSI/JSTD-002 >99% Solderability MIL-STD-202 Method 208 >99% Adhesion ASTM B-571 Passes 3 Axis Mechanical Shock LTES-461 Passes DESIGN PARAMETERS - ALL S PICK-UP SPOT DIAMETER MATERIAL MATERIAL THICKNESS TAPE MATERIAL 6 mm or greater 0,20 mm CRS Tin 0,20 mm LTIMS-LCB Cover tape material DIAMETER MATERIAL PACKAGING LTIMS-PSA 330 mm (101, 102, 103, 104, ) 381 mm (105, 106, 107, 205, 206, 207, 208, 209, 210) Plastic EIA-481 BMI-S-201-F.538 (13,66).476 (12,10).100 (2,54) 24 mm 20 mm 1000 BMI-S-202-F.650 (16,50).650 (16,50).142 (3,60) 32 mm 24 mm 700 BMI-S-203-F (26,21) (26,21) 44 mm 32 mm 300 BMI-S-209-F (29,36).728 (32,00).275 (7,00) 56 mm 28 mm 400 BMI-S-204-F (32,00) (32,00) 44 mm 36 mm 225 BMI-S-206-F (36,83) (33,68) 56 mm 40 mm 300 BMI-S-205-F (38,10) (25,40) 56 mm 44 mm 250 BMI-S-210-F (44,02) (30,50).118 (3,00) 56 mm 40 mm 450 BMI-S-207-F (44,37) (44,37).384 (9,75) 56 mm 56 mm 120 BMI-S-208-F (39,60) (39,60).276 (7,00) 56 mm 48 mm 200 All dimensions shown are in inches (millimeters) unless otherwise specified. 6
2 ONE-PIECE BMI-S x.476 (13,66 x 12,70).100 (2,54) TAPE TAPE S PER 24 mm 20 mm 1000 Works exceptionally well in small component areas 48 VQFP TWO-PIECE Works exceptionally well in small component areas 48 VQFP TAPE TAPE S PER BMI-S-201-F.538 x.476 (13,66 x 12,70).100 (2,54) 24 mm 20 mm 1000 The cover is ordered as a separate part. The part number is BMI-S-201-C and is packaged in the same quantity as the frame. 7
3 ONE-PIECE NO. BMI-S-102 BMI-S x.650 (16,50 x 16,50).142 (3,60) TAPE TAPE S PER 32 mm 24 mm VQFP 44, 48 QFP TWO-PIECE NO. BMI-S-202 BMI-S-202-F.650 x.650 (16,50 x 16,50).142 (3,60) TAPE TAPE S PER 32 mm 24 mm 700 The cover is ordered as a separate part. The part number is BMI-S-202-C and is packaged in the same quantity as the frame. 48 VQFP 44, 48 QFP 8
4 ONE-PIECE BMI-S x (26,21 x 26,21) S PER 44 mm 32 mm , 44, 52 pin PLCC 121, 169 BGA 44, 48, 64, 80 QFP TWO-PIECE BMI-S-203-F x (26,21 x 26,21) S PER 44 mm 32 mm 300 The cover is ordered as a separate part. The part number is BMI-S-203-C and is packaged in the same 32, 44, 52 pin PLCC 121, 169 BGA 44, 48, 64, 80 QFP 9
5 ONE-PIECE BMI-S x (32,00 x 32,00) S PER 44 mm 36 mm , 169, 225 BGA 32, 44, 52, 68 PLCC TWO-PIECE S PER 121, 169, 225 BGA 32, 44, 52, 68 PLCC BMI-S-204-F x (32,00 x 32,00) 44 mm 36 mm 225 The cover is ordered as a separate part. The part number is BMI-S-204-C and is packaged in the same 10
6 ONE-PIECE BMI-S x (38,10 x 25,40) S PER 56 mm 32 mm BGA 32, 44, 52 PLCC TWO-PIECE NO. BMI-S-205 BMI-S-205-F x (38,10 x 25,40) S PER 56 mm 44 mm 250 The cover is ordered as a separate part. The part number is BMI-S-205-C and is packaged in the same 121 BGA 32, 44, 52 PLCC 11
7 ONE-PIECE NO. BMI-S-106 BMI-S x (36,83 x 33,68) S PER 56 mm 40 mm , 169, 225 BGA 32, 44, 52, 68 PLCC TWO-PIECE NO. BMI-S-206 BMI-S-206-F x (36,83 x 33,68) S PER 56 mm 40 mm 300 The cover is ordered as a separate part. The part number is BMI-S-206-C and is packaged in the same 121, 169, 225 BGA 32, 44, 52, 68 PLCC 12
8 ONE-PIECE BMI-S-107 BMI-S x (44,37 x 44,37).384 (9,75) S PER 56 mm 56 mm 120 Supplied in 56 mm EIA standard carrier tape 121, 169, 225, 313 BGA 32, 44, 52, 68, 84 PLCC 48, 100, 208 VQFP 44, 48, 64, 80, 100, 120, 160 QFP TWO-PIECE BMI-S-207 S PER 121, 169, 225, 313 BGA 32, 44, 52, 68, 84 PLCC 48, 100, 208 VQFP 44, 48, 64, 80, 100, 120, 160 QFP BMI-S-207-F x (44,37 x 44,37).384 (9,75) 56 mm 56 mm 120 The cover is ordered as a separate part. The part number is BMI-S-207-C and is packaged in the same 13
9 1,50 STANDARD DESIGN SHIELDS AND CONTACTS TWO-PIECE BMI-S-208 S PER BMI-S-208-F x (39,60 x 39,60).276 (7,00) 56 mm 48 mm 200 The cover is ordered as a separate part. The part number is BMI-S-208-C and is packaged in the same 39,60 38,10 6,00 40,20 40,40 1,00 TYP 36,30 34,10 19,80 30,30 28,10 1,50 x 2 24,30 22,10 1,50 19,80 38,10 39,60 40,20 18,30 16,10 12,30 10,10 6,30 4,10 0,50 TYP 7,00 0, ,10 6,30 10,10 12,30 3,30 6,30 9,30 12,30 15,30 18,30 21,30 24,30 27,30 30,30 33,30 36,30 16,10 18,30 22,10 24,30 28,10 30,30 34,10 36,30 40,40 TWO-PIECE BMI-S-209 S PER BMI-S-209-F x (29,36 x 18,50).275 (7,00) 44 mm 28 mm 400 The cover is ordered as a separate part. The part number is BMI-S-209-C and is packaged in the same 18,50 17,00 16,00 x 2 9,25 2,50 x 2 1,50 R0,25 x 4 6,00 19,10 16,10 3,00 X X Z Z 26,96 26,96 1,50 x 2 3,00 19,30 13,75 11,55 7,75 5,55 1,00 TYP 1,50 2,50 x 2 13,93 14,68 15,43 26,86 x 2 27,86 29,36 0,50 TYP 3,00 2,98 x 2 5,73 8,98 x 2 11,73 14,98 x 2 17,73 20,98 x 2 23,73 4,98 26,98 x 2 7,18 10,98 13,18 16,98 19,18 22,98 25,18 30,
10 TWO-PIECE BMI-S-210 S PER BMI-S-210-F x (44,00 x 30,50).118 (3,00) 56 mm 40 mm 120 The cover is ordered as a separate part. The part number is BMI-S-210-C and is packaged in the same 1,00 TYP 31,30 2x 28,75 2X 26,55 2X 22,75 2X 20,55 2X 16,75 2X 14,55 2X 10,75 2X 8,55 31,10 28,10 3,00 A A B B 27,55 x2 24,30 2X 4,75 2X 2,55 21,55 x2 18,30 1,50 x2 3,00 15,55 x2 12,30 9,55 x2 6,30 3,55 x2 2X 3,30 2X 5,50 2X 9,30 2X 11,50 2X 15,30 2X 17,50 2X 21,30 2X 23,50 2X 27,30 2X 29,50 2X 33,30 2X 35,50 2X 39,30 2X 41,50 44,80 2,40 4,30 x2 7,05 10,30 x2 13,05 16,30 x2 19,05 22,30 x2 25,05 28,30 x2 31,05 34,30 x2 37,05 40,30 x2 41,60 44,60 0,50 TYP 15
GT Series Sealed Ultraminiature Toggle Switches
Sealed Ultraminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature
More informationPOLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The device provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C&K ET Series Sealed Subminiature Switches Features/Benefits Sealed against
More informationPLED Ultra Low Holding Current Series
RoHS Description Agency Approvals This PLED ultra-low holding current series exhibits a low holding current parameter that makes it compatible with LED lighting strings. The series provide a switching
More informationTable 2: Ratings Symbol Parameter Test Conditions Min. Typ. Max. Unit Source Document
FEATURES and BENEFITS Significant spaceflight heritage (TRL 9) Sealed Sub-Miniature Snap Action Meets MIL-PRF-8805 enclosure design symbol 3 Spaceflight qualified Gold Contacts Vibration resistant Compact
More informationSensitive Triacs. Description. Features. 10Amps. Applications. Schematic Symbol. Symbol Parameter Value Unit = 50 C SOT-223 T L TO-92 T C
Description New 1Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking junctions are
More informationGT Series Sealed Ultraminiature Toggle Switches
Sealed Ultraminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature
More informationFast Acting Fuse SMD Thin Film
Electrical Specifications Operating temperature : -55 C to +25 C Current carrying capacity : For MCF0402E and MCF0603E at -55 C 7% of rating, at -25 C 0% of rating, at +25 C 80% of rating For MCF0603C
More informationModel C2023J5003A00. Ultra Low Profile db, 90 Hybrid Coupler
Model C223J53A Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C223J53A is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. It is
More informationASMT-QWBG / ASMT-QWBH / ASMT-QWBJ 0.5W Cool White Power PLCC4 Surface Mount LED Datasheet
ASMT-QWBG / ASMT-QWBH / ASMT-QWBJ 0.5W Cool White Power PLCC4 Surface Mount LED Datasheet CAUTION: Static sensitive device. Please observe appropriate precautions during handling and processing. Description
More informationFeatures. P d typ. (W) I max (A) 1206L012 A X X 1206L016 B
RoHS Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER
More informationC&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
More information2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description
RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
More informationPOLY-FUSE Resettable PTCs Surface Mount > 1206L Series
Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER
More informationET Series Sealed Subminiature Rocker Switches
ET Series Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation
More informationET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
More informationET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation Computers
More informationPDR Product Datasheet
PDR Product Datasheet PDR IR-X400-B BOSCH Focused IR BGA Rework System PDR IR-X400-B - Focused IR SMT/BGA Rework System The PDR IR-X400-B SMT/BGA rework system, using PDR s patented Focused IR technology
More informationC&K GT Series Sealed Ultraminiature Toggle Switches
C&K T Series Sealed Ultraminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models
More informationET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications
More informationC&K ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoS compliant Typical Applications Telecommunications Instrumentation Computers
More informationTransient Voltage Suppression Diodes SMTO ka > LTKAK6 series. Description. Features. Test Current I T. Reverse Breakdown Voltage (V BR I T
SMTO-218-6 ka > LTKAK6 series LTKAK6 Series RoHS Pb e3 Description The LTKAK6 series offers superior clamping characteristics over standard S.A.D. technologies by virtue of the Littelfuse Foldbak technology,
More informationRadial Leaded > 72R Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)
72R Series RoHS * Description The 72R Series is designed to provide overcurrent protection to 72Vdc maximum voltage with a maximum 40A short circuit rating. Features 72Vdc max voltage w/max 40A short circuit
More informationRadial Leaded > 16R Series. Description. Features. Applications. Additional Information. Datasheet. Maximum Time To Trip Current (A) P d typ.
16R Series RoHS Description Littelfuse 16R Series Radial Leaded PTCs are designed to provide resettable overcurrent protection serving a wide range of electronics applications. With maximum 16 volts and
More informationSurface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)
0603L Series RoHS Description The 0603L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationPOLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
More informationSurface Mount Multilayer Ceramic Chip Capacitors MIL Qualified, Type MIL-123
Surface Mount Multilayer Ceramic Chip Capacitors MIL Qualified, Type MIL-123 ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C, unless otherwise specified FEATURES Space-level reliability
More informationFeatures. Samples. I max (A) P d. typ. (W)
0805L Series RoHS Description The 0805L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationSurface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications
Surface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications ELECTRICAL SPECIFICATIONS FEATURES Manufactured with a combination of design, materials and tight process control to achieve
More information0.15 +/ (0.006" +/ ) / (0.033" +/ ) / (0.088" +/ ") 1.91 (0.075") 1.09 (0.043") 0.91 (0.
Note: For wave solder, increase the spacing in both the horizontal Surface Mount Polymeric.66 and Electrostatic +/- vertical.6 dimensions by Discharge Suppressors.54 (.") where denoted by an asterisk (*).4
More informationSLF Series. SMD Power Inductors APPLICATIONS OUTLINE PRODUCT IDENTIFICATION FEATURES SLF - -
Yageo corporation INUCTORS / BEAS SLF Series SM Power Inductors APPLICATIONS Portable telephones, computers, hard disk drives and other electronic equipment. OUTLINE SLF series is designed for low profile
More informationPower Splitter/Combiner
Ultra-Small Ceramic Power Splitter/Combiner 2 Way-90 50Ω 2500 to 4500 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C Power Input (as a splitter) 15W* max. *
More informationPCB Single Row Connectors
SERIES PB Single Row onnectors Vertical Surface Mount PB onnectors with Jackscrews How to Order Vertical Surface Mount PB onnectors feature gold alloy TwistPin contacts. These nanomimiature connectors
More informationFeatures 60R010X & 60R017X. P d typ. (W) I max (A) V max (Vdc)
60R Series RoHS * Description The 60R Series radial leaded device is designed to provide overcurrent protection for ( 60V) applications where space is not a concern and resettable protection is preferred.
More informationSingle 2 Piece Contacts: BTB
Dissecting linear LED lighting from a connector standpoint looks very simple from far away, but up close there is no magical solution. Even though there have been new connectors developed in recent years
More informationSurface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.)
1210L Series RoHS Description The 1210L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationSOLID TANTALUM CHIP CAPACITORS T510 SERIES High Capacitance-Low ESR
SOLID TANTALUM CHIP CAPACITORS T510 SERIES High Capacitance-Low Ultra Low < 30 mω New E/7260 Case with < 18 mω Up to 5 Amps ripple current RoHS Compliant & Leadfree Termination (see www. kemet.com for
More informationSurface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A)
1812L Series RoHS Description The 1812L Series PTC provides surface mount overcurrent protection for applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
More informationSOLID TANTALUM CHIP CAPACITORS T496 SERIES Fail-Safe Fused
Built-in fuse protects against damaging short circuit failure mode Precision-molded, laser-marked case Symmetrical, compliant terminations Taped and reeled per EIA 481-1 geometry and footprints equivalent
More informationFeature. -Low profile, High Current are Available. Shock and Pressure. -Tighter Tolerance of ±2% -Smaller Size of 0402 (1005) -CATV Filter, Tuner
Wire Wound Chip Inductor-WL Series Feature -Wire wound Ceramic Construction Provide High SRFs -Ultra-compact Inductors Provide Exceptional Q Values -Low profile, High are Available -Miniature SMD Chip
More informationP & P Technology Ltd
P & P Technology Ltd General Information Produced effectively from a single continuous filament, knitted wire meshes produce very high levels of EMI shielding performance when evenly compressed between
More informationWL Series Wire Wound Chip Inductor
Feature -Wire wound Ceramic Construction Provide High SRFs -Ultra-compact Inductors Provide Exceptional Q Values -Low profile, High are Available -Miniature SMD Chip Inductor for Fully Automated Assembly
More information74x Series Chip Resistor Arrays
Features Low Cost Thick Film Technology Leadless Surface Mount Construction Concave Convex Terminations Solder Coated Nickel Barrier Pads Isolated and Bussed Circuit Configurations Improved TCR Tracking
More informationFigure 3: Schematic (switch shown installed on both MLB Lower Ring & Upper Ring). Switch is SPDT-DB (Form Z)
Feature Significant spaceflight heritage Sealed, Sub-Miniature, Snap- Action Meets MIL-PRF-8805 enclosure design symbol 3 Gold contacts Test verified Variable installation Benefit TRL9. More than 200 have
More informationEMC Shielding. Contents
EMC Shielding Contents Introduction SMT Shielding Clips Shielding Cans for SMT Clips Spring Contacts Positive Stop Extended (Antenna) Box Style Multi-Directional Development Kit EMC Shielding Introduction
More informationTechnology Advancements in Board Level Shields for EMI Mitigation
Technology Advancements in Board Level Shields for EMI Mitigation Not Your Daddy s s Metal Can Gray Fenical inarte EMC and ESD Engineer APPROACH Fixing the CAUSE of the problem is usually always better
More informationSOLID TANTALUM CHIP CAPACITORS
SOLID TANTALUM CHIP CAPACITORS T491 SERIES - Precision Molded Chip Meets or Exceeds EIA Standard 535BAAC Taped and Reeled per EIA 481-1 Symmetrical, Compliant Terminations Optional Gold-plated Terminations
More informationConductive Fabric Over Foam Gaskets
Product Overview This product is manufactured from a synthetic polyester or nylon yarn which is plated to give electrical conductivity over the surface of the fibre and then woven in a traditional way
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1)
SIDACtor Series - DO-214 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides
More informationSMD Wire Wound Chip Inductor
GSW Series SMD Wire Wound Chip Inductor Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors
More informationPositive Temperature Coefficient (PTC) Data Sheet
Positive Temperature Coefficient (PTC) Data Sheet Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable
More informationAxial Lead & Cartridge Fuses 2AG > Time Lag > 229/230 Series
229/ 2AG, Slo-Blo Fuse with Indicating Option PS E Description Agency Approvals Agency Agency File Number Ampere Range E10480 250mA - 3.5A LR 29862 250mA - 7A E10480 4A - 7A Littelfuse 229/230 series Slo-Blo
More informationT he Cole Series S3900 miniature P.C. termination rotary switch
S3900 series T he Cole Series S3900 miniature P.C. termination rotary switch is designed to provide the ultimate mechanical and electrical reliability in instrumentation, industrial controls, medical equipment,
More informationData sheet SMD Wire Wound Chip Inductor WL Series
Data sheet SMD Wire Wound Chip Inductor W Series Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high
More informationPOLY-FUSE Resettable PTCs. 2920L Series. Surface Mount > 2920L Series E R RoHS. Description
2920L Series RoHS Description The 2920L Series PTC provides surface mount overcurrent protection for medium voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
More informationMulti-Layer Power Inductors (IP_L Series)
Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x
More informationMicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
More informationSurface Mount Terminal Blocks. 950-D-SMD-DS 5.00 mm (0.197 in) Spacing poles PICTURES TECHNICAL INFORMATION. page 1/5 950-D-SMD-DS
page 1/5 Surface Mount Terminal Blocks 950-D-SMD-DS 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 950-D-SMD-DS TECHNICAL INFORMATION Description 5 mm spacing, surface mount adapted terminal block for
More informationFeatures. V max (Vdc) I max (A) typ. (W) P d
2016L Series RoHS Description The 2016L Series PTC provides surface mount overcurrent protection for low voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
More information74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern
A FEATURES Shielded Construction with very low DCR Heating Current rating up to 17.9 Amps Saturation Current rating up to 7.5 Amps (based on only 10% inductance drop) Inductance up to 1mH for all case
More informationC&K EP Series Sealed Tiny Pushbutton Switches
Models Available Features/enefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available Typical Applications
More informationSOFT-SHIELD 5000 Series Conductive Jacket over Foam EMI Gaskets
Seals Conductive elastomers Knitted wire mesh Conductive coatings, sealants, adhesives Cable shielding products EMI/ESD shielding laminates Shielded vents and windows Commercial and military EMI testing
More informationSurface Mount Terminal Blocks. 930-D-SMD (-DS) 3.50 mm (0.138 in) Spacing poles PICTURES TECHNICAL INFORMATION. page 1/5 930-D-SMD-DS
page 1/5 Surface Mount Terminal Blocks 930-D-SMD (-DS) 3.50 mm (0.138 in) Spacing - 2-12 poles PICTURES 930-D-SMD-DS TECHNICAL INFORMATION Description The floating terminal contacts ensure total co-planar
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & ANTI-SULFURATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: RMNW K HTS-1 /3 Date: 217. 4. 21 Data sheet : ANTI-SULFURATION RMNW1,16,2,32,35 AEC-Q2 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock conditions Temperature: +5 C +35 C Relative
More informationALUMINUM ORGANIC CAPACITORS
ALUMINUM ORGANIC CAPACITORS A700 Series APPLICATIONS Input/Output Filters for voltage regulators, converters, and SMPS Battery Decoupling (portable, handheld electronics) Power Decoupling (Procesor, Transmitter
More informationRockers Product Selection Guide
s Product Selection Guide Series 7000 E ET T 9000 DA D Switch Type Subminiature Subminiature & Lever andle Poles/Throws,, 3PDT, 4PDT,, 3PDT,, DPST, Max. Current 5 Amps 7.5 Amps 3 Amps 3 Amps 4 Amps Washable
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - DO-214 E Description
SIDACtor Series - DO-214 RoHS Pb e3 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series
More informationCRS-A Series High Power Anti-Surge Resistor
*RoHS COMPLIANT, **HALOGEN FREE & AEC-Q200 COMPLIANT Features Thick film technology Power rating up to 2 watts at 70 C High power surge withstanding Sulfur-resistant design (ASTM B-809) RoHS compliant*
More informationSURFACE MOUNT NOMENCLATURE AND PACKAGING
SURFACE MOUNT NOMENCLATURE AND PACKAGING Tel 800-776-9888 Email info@topline.tv w w w. t o p l i n e. t v Contents Overview... 3 Flat Chip... 4 MELF Components...10 Tantalum Capacitors.... 12 Transistors
More information1.0" Min. L.S..762/.030. Styles SR15, SR20, SR30, SR40, SR50
Radial Leads/SkyCap GENERAL INFORMATION AVX SR Series Conformally Coated Radial Leaded MLC Temperature Coefficients: C0G (NP0), X7R, Z5U 200, 100, 50 Volts (300V, 400V & 500V also available) Case Material:
More informationSE 300 Solder Paste Inspection System Gauge Repeatability and Reproducibility Procedure and Results
SE 300 Solder Paste Inspection System Gauge Repeatability and Reproducibility Procedure and Results Background Any time a process is measured there is some variation. This variation comes from two sources:
More informationALUMINUM ORGANIC CAPACITORS
ALUMINUM ORGANIC CAPACITORS A700 Series APPLICATIONS Input/Output Filters for voltage regulators, converters, and SMPS Battery Decoupling (portable, handheld electronics) Power Decoupling (Procesor, Transmitter
More informationWire Wound Chip Inductor
FEATURES Ceramic base provides high SRF Ultra-compact inductors provide high Q factors High current range available Miniature SMD chip inductor for fully automated assembly Outstanding endurance from Pull-up
More informationC&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
More informationTypical Performance Data
Surface Mount Attenuator/Switch 75Ω Bi-Phase to Maximum Ratings Operating Temperature -4 C to 85 C Storage Temperature -55 C to C Control Current 3mA Permanent damage may occur if any of these limits are
More informationLow profile Fast response to fault current Compatible with high temperature solders
Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable for ultra portable applications where space
More informationCustomer P/N: UDE P/N: GD4-QU Description:
To: Customer P/N: UDE P/N: Description: RJ45 1X4 Tab Down Through Hole 10G Base-T Contact Area : 30μ" Min.Gold LED: without LED 100% RoHS without exemption Spec No. GD416005-00 Update Date 2016/11/28 Revision
More informationWK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603
WK25S WK20S WK10S WK12S WK08S WK06S ±5% 5%, ±10 10%, ±20 20% Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to change
More informationBATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS. Ideal contacts for A AA AAA N Contacts available for.062 and.093
BATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS Ideal contacts for A AA AAA N Contacts available for.062 and.093 size batteries. thick PC boards Space saving design installs directly onto
More informationIPC-7351B Electronic Component Zero Orientation For CAD Library Construction
AppNote 10831 A P P N O T E S SM IPC-7351B Electronic Zero Orientation For CAD Library Construction Copyright 2010 Mentor Graphics Corporation Trademarks that appear in Mentor Graphics product publications
More informationMULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED
MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED Multilayer ceramic capacitors are available in a variety of physical sizes and configurations, including leaded devices and surface mounted chips. Leaded
More informationSeries 206/208 Through-Hole DIP Switch
Available with SPST, SPDT, DPST, 3PST circuitry choices Available with low profile, standard, or extended actuator heights. Consult the ordering information for options. RoHS compliant Optional top tape
More informationDATA SHEET TAPE AND REEL TYPE LED LAMPS. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LG2040-PF/TRS-X REV. : DATE : 21 - Feb.
TAPE AND REEL TYPE LED LAMPS Pb Lead-Free Parts LG2040-PF/TRS-X DATA SHEET DOC. NO : REV. : QW0905- LG2040-PF/TRS-X A DATE : 21 - Feb. - 2006 PART NO. Package Dimensions LIGITEK ELECTRONICS CO.,LTD. LG2040-PF/TRS-X
More informationIR BGA Rework Station T862++ User Manual
IR BGA Rework Station T862++ TAIAN PUHUI ELECTRIC TECHNOLOGY CO.,LTD www.tech168.cn CONTENT 1. Features...2 2. Technical Parameters..3 3. List of content...... 3 4. Description of the main parts.....4
More informationMolded Chip Wirewound Inductors
FEATURES EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC
More informationC308F 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications
Technical Data 4405 Supersedes October 2017 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications Agency information curus Recognition file number: E19180, Guide JDYX2/JDYX8 Applications
More informationTemperature Coefficient of Resistance Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage Insulation Resistance
.220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor Networks RoHS Compliant Electrical Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature Range Temperature
More information0.3 mm Pitch, 1.0 mm Height FPC Connector
0.3 mm Pitch, 1.0 mm Height FPC Connector FH26 Series Space saving(51 pos. shown) 1.0mm 3.2mm.8mm Metal fittings do no protrude outside of the connector body Features 1. Low-profile 0.3 mm pitch FPC connector
More informationBi-Directional Coupler
Bi-Directional Coupler DC Pass, High Power 50Ω 30dB Coupling 200W 225 to 450 MHz The Big Deal High power handling, up to 200W High directivity, 28 db Low insertion loss, 0.15 db Product Overview Mini-Circuits
More informationDETAIL 'A' INTERIOR INSTALLATION. OVERALL ISOMETRIC VIEW (unless noted otherwise) 300C CARRIER 12 GA HANGER WIRE, BY OTHERS, NOT BY HUNTER DOUGLAS
3 " NOM. 316 G, ER V RO N HA. TYP SEE DETAILS A1.7 THROUGH A1.10 FOR FIXTURE OPENING RECOMMENDATIONS IE ARR XC 12 GA HANGER WIRE, BY OTHERS, NOT BY HUNTER DOUGLAS SEE DETAIL A1.2 A "M 1'-0 300C PANEL SPLICE
More informationCONTENTS HMK SERIES X.100 CONNECTORS
HMK SERIES CONTENTS HMK SERIES -.100 X.100 CONNECTORS PAGE 5 Introduction 6 Specifications 7 Ordering Chart - 2 & 3 Row 2 ROW UNINTERRUPTED (17-65 CONTACTS) 8 FC, FD, FS, FW, SC, SD, SS, SW- Socket, Straight
More informationSystem. Specifications
Kit Part Numbering System WebCode XK1 926 Series 900 = QFP Lead Template 901 = FC176 Flip Chip 902 = FC88 Flip Chip 903 = FC317 Flip Chip 904 = FC220 Flip Chip 905 = CBGA Ceramic Substrates 906 = FC96
More informationSemiconductor Manufacturing Technology. Semiconductor Manufacturing Technology
Semiconductor Manufacturing Technology Michael Quirk & Julian Serda October 2001 by Prentice Hall Chapter 20 Assembly and Packaging Four Important Functions of IC Packaging 1. Protection from the environment
More informationBristol Tape Corporation An ISO 9001:2000 Certified Company. 3M Converter Markets
3M Converter Markets Specialty Tapes Low Outgassing Electrically Conductive Thermally Conductive Thermal Pads Thermo-Bond Films Repulpable Plate Mounting Page 1 of 8 SPECIALTY TAPES Low Outgassing Tapes:
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationWire Wound Chip Inductor-WB Series
Wire Wound Chip Inductor-WB Series Construction 4 1 3 1 Ceramic Core 3 Electrode (Ag/Pd+Ni+Sn) 2 Magnet Wire 4 UV Glue 2 Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors
More information(TRWL) Wire Wound Chip Ceramic Inductor
Version: April 12, 2018 (TRWL) Wire Wound Chip Ceramic Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications ELECTRICAL SPECIFICATIONS FEATURES C0G (NP0) and X7R dielectrics offered C0G (NP0) is an ultra-stable dielectric offering a
More informationSolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing
More information