Index. Symbols RECESSED DOWNLIGHTS 10 CEILING AND SUSPENSIONS 248 SMALL DOWNLIGHTS 72 TECHNICAL SUSPENSION 316 RECESSED PROJECTORS

Transcription

1 indoor

2 Index Symbols RECESSED DOWNLIGHTS CCT FLASH CEILING AND SUSPENSIONS CCT HI 12 CCTLed DOWNLIGHT 38 CCTLed DOWNLIGHT DEEP 24 CCTLed DOWNLIGHT TRIMLESS 34 CCTLed DOWNLIGHT WALL WASHER 64 HELIUM 62 KRIPTON 276 BeBOP 250 CCTLed TUBE 278 CCTLed PENDANT DESE NEW 292 ERCOLE 288 KRONO 296 LITE-BOX MINIDESE MINIMA Q-BO MINIMINIMA REQUISITES AND INFORMATION UNLESS SPECIFIED OTHERWISE CONSORZIO ECOLIGHT All fixtures of the Interior Targetti collection have been designed and produced to comply with European standard EN relative to the safety requisite of light fixtures. - all fixtures are supplied without lamps; - all fixtures are sold separately; - all measurements are expressed in millimeters; - all fixtures at low voltage are supplied without transformer; - all fixtures can be supplied, on request, with nominal voltage of 110V and 240V. Targetti Sankey Spa belongs to the Consorzio Ecolight established in 2004 to comply with the previsions of European Directive 2002/96/CE-RAEE converted by Italian law into Legislative Decree no.151 of July 25th 2005 for the management, recovery and treatment of electrical and electronic devices at the end of their usable life, in respect of all the regulations in force on the subject of environmental safeguards. DIRECTIVES EUROPEAN COUNCIL SMALL DOWNLIGHTS All fixtures comply with the following directives: - EMC Directive 2004/108/CE - LV Directive 2006/95/CE - RoHS Directive 2002/95/CE The CE seal of approval is printed on the packaging. The colors of the products illustrated are reproduced as faithfully as possible compatibly with the technical limitations of the printed medium. The company reserves the right to make changes to the production without notice. Reproduction of this catalogue or any part of it is prohibited. The products illustrated in this catalogue are covered by one or more Italian or international patents. The company will take legal action against any imitators. INSULATION CLASS DEGREE OF PROTECTION* TECHNICAL SUSPENSION 316 BeBOP BTT RECESSED MICRO NEW QUICK 322 CARTESIO RECESSED PROJECTORS NEW 318 DIVA 328 IO PLANE SHERAZADE 338 SLIM LINE NEW NEW Protective screen, keeps out solids exceeding 50 mm in size Class I luminaire in which the protection against electrical shock is guaranteed by the connections of the conductive elements accessible to a protective conductor (earth connection) ARC KRIPTON 84 ARC TRIMLESS 90 NEW ARC ARC 50 KRIPTON 146 NEW ARC 50 TRIMLESS Protective screen, keeps out solids exceeding 1 mm in size ARGON FLOOD FLUSH FORUM HALL NEW MINIMA MINIMINIMA Class II luminaire (double insulation), protected against the accidental contact with parts under tension from the user Protective screen, keeps out water falling from above and solids exceeding 1 mm in size LIGHT BEAM APERTURES 366 Protective screen, keeps out rain and solids exceeding 1 mm in size Class III luminaire, suitable for connection to very low voltage circuits CCTLed CCTLed CCTLed CLOUD ARCHITECTURAL ARCHITECTURAL ARCHITECTURAL MINI TRIMLESS CLOUD MINI KR KRIPTON PLUS Q-BO SLIM WALL SQUADRA MINIARC TRIMLESS MINIARC KRIPTON NAUTUS Cable length PROJECTORS 190 STRIP NEW TARGETTI SANKEY SpA Certificated ISO 9001 n TAR1 COVE PROJECTOR FOHO Ò MAGMA PUR RAY RAY MINI EUROSTANDARD TRACK COVELUM BELT The Enec mark, awarding of the ISO9001 certificate and the CE brand all guarantee that the activities carried out internally in the company are governed and controlled by procedures which assure constant level of quality. from to 5 10 Narrow Spot NSP Spot SP Flood FL Medium Wide Flood MWFL Wide Flood WFL Very Wide Flood VWFL Wall Washer WW note* -- Housing degree of protection -- Optic degree of protection QUADRO SHERAZADE 240 Protective screen, keeps out dust and water spray Weight of the single fixture MINIARC Protective screen, keeps out water spray and solids exceeding 1mm in size PARTICULAR SYMBOLS SYSTEMS 368 MAGMA ENEC European Norms Electrical Certification Protective screen, keeps out rain and solids exceeding 12 mm in size Luminaire in which the connection to a protective conductor (earth connection) guarantees the immunity to radio noises ARC SAFETY STANDARDS SLIM RECTANGLE WALL MOUNTED beam

3 light emission certified Performance Our each and every product is developed in accordance with the following benchmarks: light control, efficiency and scrupulous attention to the smallest functional aspects.

4 applied passion Attention to details Innocean Design Agency - Frankfurt, Germany. Project: Ippolito Fleiz Group. Photographer: Robert Hoernig Every product is designed for optimum functionality without sacrificing the quality of design.

5 tailored solutions Originality Uffizi Museum - Florence, Italy They are original insofar as they are flexible: Targetti products excel in the ability to integrate into different architectural environments.

6 minimum maintenance Sustainability Targetti products are sustainable because they are designed to last, that is, to keep their original features intact over time.

7 RECESSED DOWNLIGHT

8 CCTled Downlight RECESSED DOWNLIGHT INNOVATIVE CCTLed combines aesthetic features and performance in a single product resulting in a lighting performance and versatile design tool. Different versions from a range that takes the concept of innovation to its extreme, reaching out into the future of technology. Innocean Design Agency - Frankfurt, Germany. Project: Ippolito Fleiz Group. Photographer: Robert Hoernig 12 DOWNLIGHTS DOWNLIGHTS 13

9 CCTled Downlight TRIMLESS VERSIONS The TRIMLESS version is distinguished by a frame made of white painted aluminium, thanks to its special design can be used directly used as counterring eliminating other installation templates. Nothing is left to chance. The round ring is perforated in order to ensure a secure grip for a soft plastering finish and anodized to prevent the formation of rust which would mark the false ceiling over time. A TRIM FOR EVERY ARCHITECTURAL DESIGN The CLASSIC version can be combined with three different decorative rings, having a completely new design, compatible with the three optics. Rings with straight or rounded edge and the new XL ring that is able to further reduce the size of the emitting surface. All declined in two different colours, black and white. Specifically designed for the TECH version, thanks to its considerable size and brand new smooth effect, the XL ring allows creating a captivating play between light and matter, for professional spaces full of charm. The range is completed by two other rings complete with safety screen: micro-prismatic diffusive or silk printed. KRIPTON VERSIONS The entire range of recessed projectors are compatible with a decorative plaster ring that makes it possible to insert the fixture into the false ceiling, thus redefining the technical quality of the CCTLed light through a more decorative and versatile approach. The plaster rings can be painted with traditional water-based paints to coordinate the lighting project with the aesthetics of the architectural concept. Assembly is really quick and easy. It is possible to order the plaster component separately for installation on site so once the electric wiring is fitted the lighting fixture can even be installed at a later stage. 14 DOWNLIGHTS DOWNLIGHTS 15

10 CCTled Downlight LONG TERM QUALITY AND PERFORMANCE CCTLed s heat sink is able to keep the s junction point temperatures below the prescribed levels, thereby maximising performance and above all, maintaining this over time. The source within the CCTLed works below 115 which is why it can have a realistic life span of up to 100 thousand hours. 10 cm CCTLed Downlight Diameter Ø 160mm Recessed depth H. 100mm all versions Fixture s luminous flux 22W > 2000lm 32W > 2700lm (3000K) Color temperature 2700K, 3000K, 4000K Optics Smart, Tech, Feel, Wall Washer Lifetime (hours) Maximum operating temperature of CCTLed L70B10 L70B T j (C ) (Junction temperature) Plate data of lamp supplied by manufacturer EVEN MORE PERFORMANCE Thanks to its universal interface CCT is able to follow the evolution of sources. This little-big downlight is now fitted with a new source that makes it possible to lower power consumption with the same flux and therefore improve overall efficiency. TOOLS FREE INSTALLATION SMALL DOWNLIGHT WITH UP TO 32W Everything is so quick and easy with CCTLed. The installation is fast and intuitive. Every detail is designed to reduce installation times without the need for any kind of tool, not even for the connection to the driver unit. The sliding device for mounting to the false ceiling is extremely easy, the power supply is provided with a quick connector, the optics system has a bayonet lock as do the different decorative rings. With a mounting depth of just 10cm this downlight is the smallest and best performing in the market. power output of up to 32W with fixture fluxes up to 2849lm. Great performance in a compact body. CCTLed CCTLed may also be a wall fixture, or ceiling or suspension mounted in the sophisticated TUBE version. A complete program for illuminating projects in any environment. All the CCTLed DOWNLIGHT optics are available in the TUBE version. QUICK CONNECTION PLUG CCTLed comes pre-wired, it is provided with a quick connection plug for immediate connection to the power supply. All the accessory power supplies have two doors that open separately for easy management of both In and Out connections. program 16 DOWNLIGHTS DOWNLIGHTS 17

11 CCTled Downlight The three CCTLed versions names - SMART, TECH and FEEL - suggest the different light feelings and effects as well as some ideal applications of the downlight. It is up to the sensitivity of the designer to evaluate the different characteristics and to explore different uses which, in fact, are endless. Optics with different geometries and mirror facetted or smooth matt finishes can be combined together to create a wide range of lighting effects, always ensuring the highest level of efficacy, visual comfort and chromatic quality. TECH The light is emitted in an efficient and controlled manner by the internal reflector while the external one outlines a luminous ring that enhances the evocative effect. CCTLed TECH is suitable to be installed not only in environments regulated by the EN standard on direct glare limitation, but also in areas with high ceilings or double volumes, where light control is fundamental to ensure good illuminating values, precision and visual comfort. 22W - max 2056 lm 32W - max 2714 lm α= 70 UGR<19 L =1000 cd/m 2 SMART CCTLed SMART is not only characterised by the geometry of the reflector, but also by its combination with an innovative microprismatic dome refractor that shields the source and distributes the light in a soft and diffused manner. CCT Led is ideal where a diffused and perfectly homogeneous general lighting is required. FEEL Only 25W consumption for an extremely original downlight, whose design and the completely hidden ligth source are able to create captivating atmospheres with great visual comfort. The final effect is extremely comfortable, keeping the performances in line with the EN standard (UGR<19). 22W - max 2158 lm 32W - max 2849 lm α= 80 UGR<22 25W - max 1676 lm α= 70 UGR<19 L =1500 cd/m 2 L =1500 cd/m 2 18 DOWNLIGHTS DOWNLIGHTS 19

12 CCTled Downlight CCTled Downlight WALL WASHER The distinctive feature of the CCTLed Wall Washer is a particularly sophisticated dual optic system comprising three different elements. The first captures and reflects the rays emitted by the source, which would otherwise reach the wall in a haphazard way; the second is the primary element that creates the real wall washer beam; the third is a diffusive plane filter, which serves to soften the final effect. Finally, an external reflector is added to collect and reflect 3% of the light emission recovered through small openings. The result is soft lighting while contributing to the aesthetic design of the fixture. DEEP The primary facetted optic s distinctive geometry, specifically designed by Targetti for sources, magnifies the 3000lm s performance. Available both in the SPOT and FLOOD versions for lighting spaces with heights of over 6 meters with significant illumination values and exceptional uniformity. SP FL SP FL α= 19 α= 33 n. 16 CCTLed n. 16 CCTLed UGR<19 UGR<19 AVERAGE ILLUMINANCE CALCULATION ROOM TYPE Reflection surfaces: 0,70-0,50-0,20 Maintenance factor: 0,80 Work s plane: 0,20 10 m 10 m H. 6 m 576W tot. 576W tot. 1,63W/m 2 /100lx 1,8W/m 2 /100lx Em= 353 Em= 320 U= 0,36 U= 0,71 1,2 m 1 m H 3.00 m - recommended space between each fixures 1.20m H 6.00 m - recommended space between each fixures 1.00m H. 3 m Available both in the 22W and 32W version, the CCTLed WALL WASHER is ideal for lighting up large vertical surfaces. Any space with illuminated walls will appear larger and more appealing. A 120 cm spacing between each fixture is sufficient to provide a completely uniform effect. This is real efficacy! DEEP VERSION FOR GREAT HEIGHTS The DEEP version is the best performing amongst the CCTLed downlights, particularly developed for lighting environments with great heights or double volumes. Exceptional performance with highly controlled beams and extremely low energy consumptions. 20 DOWNLIGHTS

13 CCTLed DOWNLIGHT PROGRAM SMART IP43 o 0,45m 0,9 OPTIC COLOR CURRENT CODE. 22W facetted 2700K 600mA TS 658 1T3252 recessed downlight. Black painted die cast aluminium body and heat sink. High emission warm white (2700K and 3000K) or neutral white (4000K) with Ra 84; Ra 97 on request. Flood precision reflector available in facetted version or smooth matt finishing with high reflectance. Microprismatic refractor. The fixture is suitable for installation in workplaces (UGR<22). Ultra rapid tools free mounting system for false ceiling installation from 0,5 to 30mm. For installation in concrete wall or ceiling, to be completed with the special carter available as an accessory. Passive dissipation system. Equipped with cable (450mm) and plug for easy and safe connection to the driver. To be completed with decorative ring and power supply, available in electronic, electronic dimmable 1/10V and DALI dimmable. Emeregency kit with 3h battery. 170mm 500mm Ø 175 Ø ,5 Ø 160 mm 22W facetted 3000K 600mA TS W facetted 4000K 600mA TS W matt 2700K 600mA TS W matt 3000K 600mA TS W matt 4000K 600mA TS W facetted 2700K 900mA TS W facetted 3000K 900mA TS W facetted 4000K 900mA TS W matt 2700K 900mA TS W matt 3000K 900mA TS 654 1T2913 1T2914 1T3254 1T2917 1T2918 1T3253 1T2915 1T2916 1T3255 1T W matt 4000K 900mA TS 654 1T2920 The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site Power supply 600mA 900mA Electronic V 1T3625 1T Electronic 1/10V + touch dimm V 1T3626 1T2967 DALI dimmable electronic V 1T3627 1T2968 Emergency kit CODE Emergency + battery pack 3h 1T3144 Synchronization cable CODE Synchronizes the dimming between 2 drivers. It is possible to connect up to 10 driver in order to maintain a uniform effect for all fixtures. 1T2833 Installation accessories See page 40 TS ,6W TS ,6W Imax 691 cd/klm 72 KELVIN 2700K 3000K 4000K 2285 lm 2431 lm 2503 lm 1937 lm 2061 lm 2123 lm EFFICACY 76 lm/w 80 lm/w 83 lm/w IMAX 1579 cd 1680 cd 1730 cd Imax 596 cd/klm 82 KELVIN 2700K 3000K 4000K 2285 lm 2431 lm 2503 lm 1970 lm 2096 lm 2159 lm EFFICACY 77 lm/w 82 lm/w 84 lm/w IMAX 1363 cd 1450 cd 1494 cd Rings Squared ring with microprismatic diffusive screen White 1T3035 Squared ring with silk screen printed White 1T2939 TS W KELVIN 2700K 3000K 4000K 3015 lm 3208 lm 3304 lm 2557 lm 2720 lm 2802 lm EFFICACY 71 lm/w 76 lm/w 78 lm/w TS W KELVIN 2700K 3000K 4000K 3015 lm 3208 lm 3304 lm 2600 lm 2766 lm 2849 lm EFFICACY 72 lm/w 77 lm/w 79 lm/w Rounded ring White Black 1T2933 1T3529 Squared ring Plaster ring White Black White 1T2935 1T3530 1T4213 Imax 691 cd/klm 72 IMAX 2083 cd 2216 cd 2283 cd Imax 596 cd/klm 82 IMAX 1798 cd 1913 cd 1971 cd 22 DOWNLIGHTS DOWNLIGHTS 23

14 CCTLed DOWNLIGHT TRIMLESS PROGRAM SMART IP23 o 0,45m 0,9 OPTIC COLOR CURRENT CODE. 22W facetted 2700K 600mA TS 658 1T3262 Trimless recessed downlight for plasterboard. Anodised die cast aluminium body white painted and black painted die cast dissipator. High emission warm white (2700K and 3000K) or neutral white (4000K) with Ra 84; Ra 97 on request. Flood precision reflector available in polished facetted version or smooth matt finishing with high reflectance. Microprismatic refractor. The fixture is suitable for installations in workplaces (UGR<22). Ultra rapid tools free mounting system for false ceiling installation from 0,5 to 30mm. Passive dissipation system. Equipped with cable (450mm) and plug for easy and safe connection to the driver. To be completed with power supply, available in electronic, electronic dimmable 1/10V and DALI dimmable. Emeregency kit with 3h battery. 170mm Ø 175 Ø ,5 Ø 160 mm 22W facetted 3000K 600mA TS W facetted 4000K 600mA TS W matt 2700K 600mA TS W matt 3000K 600mA TS W matt 4000K 600mA TS W facetted 2700K 900mA TS W facetted 3000K 900mA TS W facetted 4000K 900mA TS W matt 2700K 900mA TS 654 1T2940 1T2941 1T3264 1T2944 1T2945 1T3263 1T2942 1T2943 1T W matt 3000K 900mA TS W matt 4000K 900mA TS 654 1T2946 1T2947 The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site Power supply 600mA 900mA Electronic V 1T3625 1T Electronic 1/10V + touch dimm V 1T3626 1T2967 DALI dimmable electronic V 1T3627 1T2968 Emergency kit CODE Emergency + battery pack 3h 1T3144 Synchronization cable CODE Synchronizes the dimming between 2 drivers. It is possible to connect up to 10 driver in order to maintain a uniform effect for all fixtures. 1T2833 Installation accessories See page 40 TS ,6W TS ,6W KELVIN 2700K 3000K 4000K KELVIN 2700K 3000K 4000K lm 2431 lm 2503 lm 1937 lm 2061 lm 2123 lm lm 2431 lm 2503 lm 1970 lm 2096 lm 2159 lm EFFICACY 76 lm/w 80 lm/w 83 lm/w EFFICACY 77 lm/w 82 lm/w 84 lm/w Imax 691 cd/klm 72 IMAX 1579 cd 1680 cd 1730 cd Imax 596 cd/klm 82 IMAX 1363 cd 1450 cd 1494 cd TS W TS W KELVIN 2700K 3000K 4000K KELVIN 2700K 3000K 4000K lm 3208 lm 3304 lm 2557 lm 2720 lm 2802 lm lm 3208 lm 3304 lm 2600 lm 2766 lm 2849 lm EFFICACY 71 lm/w 76 lm/w 78 lm/w EFFICACY 72 lm/w 77 lm/w 79 lm/w Imax 691 cd/klm 72 IMAX 2083 cd 2216 cd 2283 cd Imax 596 cd/klm 82 IMAX 1798 cd 1913 cd 1971 cd 24 DOWNLIGHTS DOWNLIGHTS 25

15 CCTLed DOWNLIGHT PROGRAM TECH IP43 o 0,45m 0,9 OPTIC COLOR CURRENT CODE. 22W facetted 2700K 600mA TS 660 1T3256 recessed downlight. Die cast aluminium body and heat sink, black painted. High emission warm white (2700K and 3000K) or neutral white (4000K) with Ra 84; Ra 97 on request. Optic system consisting of a double reflector: primary internal facetted optic for low luminance emission with outer matt diffusive treatment, secondary facetted or smooth matt finish reflector. Polycarbonate micro-prismatic refractor. The fixture is suitable for installation in workplaces, in compliance with European standard EN (UGR<19). Ultra rapid tools free mounting system for false ceiling installation from 0,5 to 30mm. For installation in concrete wall or ceiling, to be completed with the special carter available as an accessory. Passive dissipation system. Equipped with cable and plug (450mm) for easy and safe connection to the driver. To be completed with decorative ring and power supply, available in electronic, electronic dimmable 1/10V and DALI dimmable. Emeregency kit with 3h battery. 170mm 500mm Ø 175 Ø ,5 Ø 160 mm 22W facetted 3000K 600mA TS W facetted 4000K 600mA TS W matt 2700K 600mA TS W matt 3000K 600mA TS W matt 4000K 600mA TS W facetted 2700K 900mA TS W facetted 3000K 900mA TS W facetted 4000K 900mA TS W matt 2700K 900mA TS W matt 3000K 900mA TS W matt 4000K 900mA TS 656 1T2921 1T2922 1T3258 1T2925 1T2926 1T3257 1T2923 1T2924 1T3259 1T2927 1T2928 The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site Power supply 600mA 900mA Electronic V 1T3625 1T Electronic 1/10V + touch dimm V 1T3626 1T2967 DALI dimmable electronic V 1T3627 1T2968 Emergency kit CODE Emergency + battery pack 3h 1T3144 Synchronization cable CODE Synchronizes the dimming between 2 drivers. It is possible to connect up to 10 driver in order to maintain a uniform effect for all fixtures. 1T2833 Installation accessories See page 40 TS ,6W TS ,6W Imax 733 cd/klm 69 KELVIN 2700K 3000K 4000K 2285 lm 2431 lm 2503 lm 1877 lm 1997 lm 2056 lm EFFICACY 73 lm/w 78 lm/w 80 lm/w IMAX 1676 cd 1783 cd 1836 cd Imax 721 cd/klm 70 KELVIN 2700K 3000K 4000K 2285 lm 2431 lm 2503 lm 1877 lm 1997 lm 2056 lm EFFICACY 73 lm/w 78 lm/w 80 lm/w IMAX 1648 cd 1753 cd 1806 cd Rings Squared ring with silk screen printed White 1T2939 Rounded ring White Black 1T2933 1T3529 TS W KELVIN 2700K 3000K 4000K 3015 lm 3208 lm 3304 lm 2477 lm 2636 lm 2715 lm EFFICACY 69 lm/w 73 lm/w 75 lm/w TS W KELVIN 2700K 3000K 4000K 3015 lm 3208 lm 3304 lm 2477 lm 2635 lm 2714 lm EFFICACY 69 lm/w 73 lm/w 75 lm/w Squared ring White Black 1T2935 1T3530 XL ring Plaster ring White Black White 1T2934 1T3531 1T4213 Imax 733 cd/klm 69 IMAX 2211 cd 2352 cd 2422 cd Imax 721 cd/klm 70 IMAX 2174 cd 2313 cd 2382 cd 26 DOWNLIGHTS DOWNLIGHTS 27

16 CCTLed DOWNLIGHT TRIMLESS PROGRAM TECH 0,9 0,45m IP23 o OPTIC COLOR CURRENT CODE. 22W facetted 2700K 600mA TS 660 1T3266 Trimless recessed downlight for plasterboard. Anodised die cast aluminium body white painted and black painted die cast dissipator. High emission warm white (2700K and 3000K) or neutral white (4000K) with Ra 84; Ra 97 on request. Optic system consisting of a double reflector: primary internal polished facetted optic for low luminance emission with outer matt diffusive treatment, secondary polished facetted or smooth matt finishing reflector for a decorative luminous effect. Polycarbonate microprismatic refractor. The fixture is suitable for installation in workplaces, conforms to European standard EN (UGR<19). Ultra rapid tools free mounting system for false ceiling installation from 0,5 to 30mm. Passive dissipation system. Equipped with cable (450mm) and plug for easy and safe connection to the driver. To be completed with power supply, available in electronic, electronic dimmable 1/10V and DALI dimmable. Emeregency kit with 3h battery. 170mm 500mm Ø 175 Ø ,5 Ø 160 mm 22W facetted 3000K 600mA TS W facetted 4000K 600mA TS W matt 2700K 600mA TS W matt 3000K 600mA TS W matt 4000K 600mA TS W facetted 2700K 900mA TS W facetted 3000K 900mA TS W facetted 4000K 900mA TS W matt 2700K 900mA TS W matt 3000K 900mA TS W matt 4000K 900mA TS 656 1T2948 1T2949 1T3268 1T2952 1T2953 1T3267 1T2950 1T2951 1T3269 1T2954 1T2955 Power supply 600mA 900mA Electronic V 1T3625 1T Electronic 1/10V + touch dimm V 1T3626 1T2967 DALI dimmable electronic V 1T3627 1T2968 Emergency kit CODE Emergency + battery pack 3h 1T3144 Synchronization cable CODE Synchronizes the dimming between 2 drivers. It is possible to connect up to 10 driver in order to maintain a uniform effect for all fixtures. 1T2833 Installation accessories See page 40 TS ,6W TS ,6W KELVIN 2700K 3000K 4000K KELVIN 2700K 3000K 4000K lm 2431 lm 2503 lm 1877 lm 1997 lm 2056 lm lm 2431 lm 2503 lm 1877 lm 1997 lm 2056 lm EFFICACY 73 lm/w 78 lm/w 80 lm/w EFFICACY 73 lm/w 78 lm/w 80 lm/w Imax 733 cd/klm 69 IMAX 1676 cd 1783 cd 1836 cd Imax 721 cd/klm 70 IMAX 1648 cd 1753 cd 1806 cd TS W TS W KELVIN 2700K 3000K 4000K KELVIN 2700K 3000K 4000K lm 3208 lm 3304 lm 2477 lm 2636 lm 2715 lm lm 3208 lm 3304 lm 2477 lm 2635 lm 2714 lm Imax 733 cd/klm 69 EFFICACY 69 lm/w 73 lm/w 75 lm/w IMAX 2211 cd 2352 cd 2422 cd Imax 721 cd/klm 70 EFFICACY 69 lm/w 73 lm/w 75 lm/w IMAX 2174 cd 2313 cd 2382 cd The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site 28 DOWNLIGHTS DOWNLIGHTS 29

17 CCTLed DOWNLIGHT PROGRAM FEEL recessed downlight. Die cast aluminium body and heat sink, black painted. High emission warm white (2700K and 3000K) or neutral white (4000K) with Ra 84; Ra 97 on request. Optic system consisting of a flood precision reflector available in facetted version or smooth matt finish with high reflectance; a micro-prismatic refractor and a metallised parabolic cusp with complete with shielding plate for a totally indirect light emission. The fixture is suitable for installation in workplaces with videoterminals compliant to European standard UNI EN (UGR<19). Ultra rapid tools free mounting system for false ceiling installation from 0,5 to 30mm. For installation in concrete wall or ceiling, to be completed with the special carter available as an accessory. Passive dissipation system. Equipped with cable (450mm) and plug for easy and safe connection to the driver. To be completed with decorative ring and power supply, available in electronic, electronic dimmable 1/10V and DALI dimmable. Emeregency kit with 3h battery. 0,9 0,45m IP43 o OPTIC COLOUR CURRENT CODE Power supply 700mA 25W facetted 2700K 700mA TS 662 1T Electronic V 1T mm 25W facetted 3000K 700mA TS 662 1T Electronic 1/10V + touch dimm V 1T mm 99,5 25W facetted 4000K 700mA TS W matt 2700K 700mA TS 663 1T2930 1T3261 DALI dimmable electronic V 1T2965 Ø 175 Ø 160 mm 25W matt 3000K 700mA TS 663 1T2931 Emergency kit CODE 25W matt 4000K 700mA TS 663 1T2932 Emergency + battery pack 3h 1T3144 Ø 140 Synchronization cable CODE Synchronizes the dimming between 2 drivers. It is possible to connect up to 10 driver in order to maintain a uniform effect for all fixtures. 1T2833 The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site Installation accessories See page 40 Rings TS Imax 501 cd/klm 73 28,2W KELVIN 2700K 3000K 4000K 2439 lm 2595 lm 2672 lm 1530 lm 1627 lm 1676 lm EFFICACY 54 lm/w 58 lm/w 59 lm/w IMAX 1222 cd 1301 cd 1340 cd TS Imax 415 cd/klm 70 28,2W KELVIN 2700K 3000K 4000K 2439 lm 2595 lm 2672 lm 1363 lm 1450 lm 1493 lm EFFICACY 48 lm/w 51 lm/w 53 lm/w IMAX 1011 cd 1076 cd 1108 cd Squared ring with silk screen printed Squared ring White White Black 1T2939 1T2935 1T3530 Rounded ring Plaster ring White Black White 1T2933 1T3529 1T DOWNLIGHTS DOWNLIGHTS 31

18 CCTLed DOWNLIGHT TRIMLESS PROGRAM FEEL Trimless recessed downlight for plasterboard. Anodised die cast aluminium body white painted and black painted die cast dissipator. High emission warm white (2700K and 3000K) or neutral white (4000K) with Ra 84; Ra 97 on request. Optic system consisting of a flood precision reflector available in polished facetted version or smooth matt finishing with high reflectance, microprismatic refractor and shielding plate for a totally indirect emission. The fixture is suitable for installation in workplaces with videoterminals compliant to European standard EN (UGR<19). Ultra rapid tools free mounting system for false ceiling installation from 0,5 to 30mm. Passive dissipation system. Equipped with cable (450mm) and plug for easy and safe connection to the driver. To be completed with power supply, available in electronic, electronic dimmable 1/10V and DALI dimmable. Emeregency kit with 3h battery. 0,9 0,45m IP23 o OPTIC COLOUR CURRENT CODE Power supply 700mA 25W facetted 2700K 700mA TS 662 1T Electronic V 1T mm 500mm 99,5 25W facetted 3000K 700mA TS W facetted 4000K 700mA TS W matt 2700K 700mA TS 663 1T2956 1T2957 1T Electronic 1/10V + touch dimm V DALI dimmable electronic V 1T2964 1T2965 Ø 175 Ø 160 mm 25W matt 3000K 700mA TS 663 1T2958 Emergency kit CODE 25W matt 4000K 700mA TS 663 1T2959 Emergency + battery pack 3h 1T3144 Ø 140 Synchronization cable CODE Synchronizes the dimming between 2 drivers. It is possible to connect up to 10 driver in order to maintain a uniform effect for all fixtures. 1T2833 The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site Installation accessories See page 40 TS ,2W TS ,2W KELVIN 2700K 3000K 4000K KELVIN 2700K 3000K 4000K lm 2595 lm 2672 lm 1530 lm 1627 lm 1676 lm lm 2595 lm 2672 lm 1363 lm 1450 lm 1493 lm EFFICACY 54 lm/w 58 lm/w 59 lm/w EFFICACY 48 lm/w 51 lm/w 53 lm/w Imax 501 cd/klm 73 IMAX 1222 cd 1301 cd 1340 cd Imax 415 cd/klm 70 IMAX 1011 cd 1076 cd 1108 cd 32 DOWNLIGHTS DOWNLIGHTS 33

19 CCTLed DOWNLIGHT PROGRAM WALL WASHER Recessed wall washer downlight. Black painted die-cast aluminium body and heat sink. Warm white (2700K and 3000K) or neutral white (4000K) high output with Ra 84; Ra 97 on request. Wall washer optic. Ultra rapid tool-free mounting system for false ceiling installations from 0,5 to 30mm. For installation in concrete wall or ceiling, to be completed with the special carter available as an accessory. Passive dissipation system. Equipped with cable (450mm) and plug for quick, secure connection to the driver. To be completed with decorative ring and power supply, available in electronic, electronic dimmable 1/10V and DALI dimmable. Emeregency kit with 3h battery. IP43 o 0,45m 0,9 OPTIC COLOUR CURRENT CODE Power supply 600mA 900mA 22W Wall Washer 2700K 600mA TS 722 1T Electronic V 1T3625 1T mm 500mm 99,5 22W Wall Washer 3000K 600mA TS W Wall Washer 4000K 600mA TS W Wall Washer 2700K 900mA TS 723 1T3369 1T3370 1T Electronic 1/10V + touch dimm V DALI dimmable electronic V 1T3626 1T3627 1T2967 1T2968 Ø 175 Ø 160 mm 32W Wall Washer 3000K 900mA TS 723 1T3372 Emergency kit CODE 32W Wall Washer 4000K 900mA TS 723 1T3373 Emergency + battery pack 3h 1T3144 Ø 140 Synchronization cable CODE Synchronizes the dimming between 2 drivers. It is possible to connect up to 10 driver in order to maintain a uniform effect for all fixtures. 1T2833 The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site Installation accessories See page 40 Rings TS ,6W KELVIN 2700K 3000K 4000K 2167 lm 2305 lm 2374 lm 1276 lm 1358 lm 1399 lm EFFICACY 50 lm/w 53 lm/w 55 lm/w TS W KELVIN 2700K 3000K 4000K 2953 lm 3142 lm 3236 lm 1740 lm 1851 lm 1906 lm EFFICACY 48 lm/w 51 lm/w 53 lm/w Rounded ring White Black 1T2933 1T3529 Squared ring Plaster ring White Black White 1T2935 1T3530 1T4213 Imax 450 cd/klm IMAX 975 cd 1038 cd 1069 cd Imax 450 cd/klm IMAX 1329 cd 1414 cd 1456 cd 34 DOWNLIGHTS DOWNLIGHTS 35

20 CCTLed DOWNLIGHT trimless PROGRAM WALL WASHER Trimless recessed wall washer downlight for plasterboard false ceilings. White anodised die-cast aluminium body and black painted die-cast aluminium heat sink. Warm white (2700K and 3000K) or neutral white (4000K) high output with Ra 84; Ra 97 on request. Wall washer optic. Ultra rapid tools free mounting system for false ceiling installation from 0,5 to 30mm. Equipped with cable (450mm) and plug for easy and safe connection to the driver. To be completed with power supply, available in electronic, electronic dimmable 1/10V and DALI dimmable. Emeregency kit with 3h battery. IP23 o 0,45m 0,9 OPTIC COLOUR CURRENT CODE Power supply 600mA 900mA 22W Wall Washer 2700K 600mA TS 722 1T Electronic V 1T3625 1T mm 500mm 99,5 22W Wall Washer 3000K 600mA TS W Wall Washer 4000K 600mA TS W Wall Washer 2700K 900mA TS 723 1T3375 1T3376 1T Electronic 1/10V + touch dimm V DALI dimmable electronic V 1T3626 1T3627 1T2967 1T2968 Ø 175 Ø 160 mm 32W Wall Washer 3000K 900mA TS 723 1T3378 Emergency kit CODE 32W Wall Washer 4000K 900mA TS 723 1T3379 Emergency + battery pack 3h 1T3144 Ø 140 Synchronization cable CODE Synchronizes the dimming between 2 drivers. It is possible to connect up to 10 driver in order to maintain a uniform effect for all fixtures. 1T2833 The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site Installation accessories See page 40 TS ,6W TS W KELVIN 2700K 3000K 4000K KELVIN 2700K 3000K 4000K lm 2305 lm 2374 lm 1276 lm 1358 lm 1399 lm lm 3142 lm 3236 lm 1740 lm 1851 lm 1906 lm EFFICACY 50 lm/w 53 lm/w 55 lm/w EFFICACY 48 lm/w 51 lm/w 53 lm/w Imax 450 cd/klm IMAX 975 cd 1038 cd 1069 cd Imax 450 cd/klm IMAX 1329 cd 1414 cd 1456 cd 36 DOWNLIGHTS DOWNLIGHTS 37

21 CCTLed DOWNLIGHT PROGRAM DEEP Low luminance recessed downlight. Black painted die-cast aluminium body and heat sink. Black polycarbonate interface. Warm white (3000K) or neutral white (4000K) high output with Ra 84; Ra 97 on request. Optical system consists of lower reflector made of matt metallised polycarbonate and precision low luminance optic with convex facets made of metallised polycarbonate with reflectancy Scratch Proof Formula treatment and high level mirror effect available in Spot and Flood versions. (UGR<19). Ultra rapid tool-free mounting system for false ceiling installations from 0,5 to 30mm. Passive dissipation system. Set up with cable (450 mm) and plug for quick, secure connection to the driver. To be completed with decorative ring and power supply, available in electronic, electronic dimmable 1/10V and DALI dimmable. Emeregency kit with 3h battery. IP43 0,45m o 1,0 OTTICA COLOUR CURRENT CODE Power supply 900mA 32W SP 3000K 900mA TS 708 1T Electronic V 1T mm 32W SP 4000K 900mA TS W FL 3000K 900mA TS 709 1T3158 1T Electronic 1/10V + touch dimm V DALI dimmable electronic V 1T2967 1T mm W FL 4000K 900mA TS 709 1T3160 Ø 175 Ø 160 mm Emergency kit CODE Emergency + battery pack 3h 1T3144 Ø 101 Synchronization cable Synchronizes the dimming between 2 drivers. It is possible to connect up to 10 driver in order to maintain a uniform effect for all fixtures. CODE 1T2833 The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site Installation accessories See page 40 Rings Squared ring with silk screen printed White 1T2939 Rounded ring White Black 1T2933 1T3529 TS W KELVIN 3000K 4000K 3200 lm 3296 lm 2542 lm 2618 lm EFFICACY 71 lm/w 73 lm/w TS W KELVIN 3000K 4000K 3200 lm 3296 lm 2485 lm 2559 lm EFFICACY 69 lm/w 71 lm/w Squared ring White Black 1T2935 1T3530 XL ring Plaster ring White Black White 1T2934 1T3531 1T4213 Imax 6330 cd/klm 19 IMAX cd cd Imax 2537 cd/klm 33 IMAX 8119 cd 8363 cd 38 DOWNLIGHTS DOWNLIGHTS 39

22 CCTLed ACCESSORIES Installation accessories ø Carter for concrete installation* Polycarbonate box to be used for installation in brick or reinforced concrete walls and ceilings. To be completed with the carter for the driver and the special grid. 1T Carter for concrete installation of the external driver* Polycarbonate box for the housing of the external driver to be used together with the carter for concrete installation in brick or reinforced concrete ceilings and walls. 1T2961 Installation grid* Polycarbonate radial grid painted in white for installation of the fixture in the dedicated carter. The special rings shape of the grid allows simple and safe plastering of the fixture. 1T2962 ø205 Ø 232 Ø 139 Retrofit kit for CCTLed Classic** Outer ring in white polycarbonate with bayonet locking system. Suitable for recessing holes between 190 and 215mm. Metal body complete with rapid mounting system for false ceilings between 1 and 25mm thick. The accessory in not compatible with the decorative rings available for CCTLed. 1T3725 IP54 ring** Squared ring with transparent screen 1T2937 * Accessories not compatible with the DEEP and Trimless versions. ** Accessories not compatible with the Trimless versions. 40 DOWNLIGHTS DOWNLIGHTS 41

23 CCT FLASH CCT flash GREEN GENERATION Recessed downlight for compact, energy-saving, fluorescent lamps Increased performance with maximum respect for the environment. The technology and the quality of the Green Generation CCT FLASH fixtures, together with the use of state-of-the-art high-efficacy compact fluorescent light bulbs, allows up to an additional 25% in energy savings compared with the standard versions, thereby reducing CO 2 emissions. Re-lamping becomes a simple and immediate operation, thanks to the Twist & Lock socket which allows the light source to be locked in place and released by simply turning it. With the new range of Green Generation models, CCT FLASH has confirmed itself as the ideal solution for combining high performance visual comfort and energy savings, in strict compliance with the most recent European standards. OFFICE LIGHTING Low-luminance controlled optics, especially designed for illuminating offices equipped with video terminals which require luminance and UGR values in compliance with the EN standard. DIMMABLE WITH A CLICK Targetti s Easy Dimm function allows a single fixture or an entire system to be dimmed by means of a wall-mounted button, which is compatible with standard recessed switch boxes. Besides simplifying the installation, this setup makes the use of the dimmer extremely easy for the user, who is free to decide which lighting effect to create with a simple click. INNUMERABLE VERSIONS -Hg CCT FLASH has always been an intelligent, reliable, high performance light fixture. It has versions to meet every need: from simple task lighting to more sophisticated versions for the office. ENERGY SAVING +25% ENERGETIC CLASS REDUCED MERCURY CONTENT TWIST AND LOCK SOCKET DIGITAL CONTROL 42 DOWNLIGHTS DOWNLIGHTS 43

24 CCT flash TYPE LAMP OPTIC SUPPLY FLOOD LOW LUMIN. WALL WASHER WIDE RANGE OF ACCESSORIES Metal decorative rings finished in facetteded chrome, brushed aluminium and steel, as well as coloured sanded polycarbonate, allow all CCT versions to be integrated into any architectural context. When installed together with a flush glass, the fixture obtains a protection rating of IP44. TC-TEL TC-TEL 1x 18W 2x 18W 1x 26W 2x 26W 1x 32W 2x 32W 1x 42W 2x 42W 1x 14/17W 2x 14/17W 1x 14/17W 2x 14/17W 1x 14/17W 2x 14/17W 1x 14/17W 2x 14/17W electronic dimmable 1/10V dimmable DALI emergency electronic dimmable DALI emergency DALI emergency MULTIPLE EFFECTS A large variety of lighting effects thanks to the possibility of installing various accessories: luminance control grids as well as silk-screen printed and sandblasted screens for softly diffusing the light. TC-TEL TC-TEL 1x 18W 2x 18W 1x 26W 2x 26W 1x 32W 2x 32W 1x 42W 2x 42W 1x 14/17W 2x 14/17W 1x 14/17W 2x 14/17W 1x 14/17W 2x 14/17W 1x 14/17W 2x 14/17W electronic dimmable 1/10V dimmable DALI emergency electronic dimmable DALI emergency DALI emergency TC-TEL 1x 18W 2x 18W 1x 26W 2x 26W 1x 32W 2x 32W 1x 42W 2x 42W electronic dimmable 1/10V dimmable DALI emergency TC-TEL 1x 14/17W 2x 14/17W 1x 14/17W 2x 14/17W 1x 14/17W 2x 14/17W 1x 14/17W 2x 14/17W electronic dimmable DALI emergency DALI emergency TC-DEL 2x 18W 2x 26W electronic TC-DEL 2x 18W 2x 26W dimmable DALI PROTECTION RATING UP TO IP54 IP44-rated protection screens, together with the silicone accessories to be applied on the finishing ring, provide the entire range of CCT FLASH fixtures with a protection rating of IP54, making them suitable for installation in all public areas, as well as within covered outdoor areas, thereby guaranteeing increased application flexibility. IP54 44 DOWNLIGHTS DOWNLIGHTS 45

25 CCt FLASH FLOOD Recessed downlight for compact fluorescent lamps. Body and bezel in white polycarbonate. Flood reflector in metallized polycarbonate, with highly-reflective Scratch Proof Formula lacquering. Rapid mounting system for false ceiling installation. Available with electronic, electronic dimmable 1-10V, digital dimmable DALI and permanent emergency power supplies. IP23 o TC-TEL SUPPLY WEIGHT CODE IP23 o TC-TEL SUPPLY WEIGHT CODE GX24q-2 1x 18W electronic 0,8 Kg TS EL GX24q-2 2x 18W electronic 0,8 Kg TS EL 75mm 100 1x 18W dimmable 1/10V 0,8 Kg TS D 75mm 100 2x 18W dimmable 1/10V 0,8 Kg TS D Ø 185 1x 18W dimmable DALI 0,8 Kg TS DA Ø 175 mm Ø 225 Ø 215 mm 2x 18W dimmable DALI 0,8 Kg TS DA 1x 18W emergency* 2,5 Kg TS H 2x 18W emergency* 1,8 Kg TS H GX24q-3 1x 26W electronic 0,8 Kg TS EL GX24q-3 2x 26W electronic 0,8 Kg TS EL 1x 26W dimmable 1/10V 0,8 Kg TS D 2x 26W dimmable 1/10V 0,8 Kg TS D 1x 26W dimmable DALI 0,8 Kg TS DA 2x 26W dimmable DALI 0,8 Kg TS DA 1x 26W emergency* 2,5 Kg TS H 2x 26W emergency* 1,8 Kg TS H GX24q-3/4 1x 32/42W electr. multipower 0,7 Kg TS EL 75mm 140 GX24q-3/4 2x 32/42W electr. multipower 1,4 Kg TS EL 1x 32/42W dimmable 1/10V 0,8 Kg TS D 2x 32/42W dimmable 1/10V 1,4 Kg TS D 1x 32/42W dimmable DALI 0,8 Kg TS DA Ø 225 Ø 215 mm 2x 32/42W dimmable DALI 1,4 Kg TS DA 1x 32/42W emergency* 2,5 Kg TS H 2x 32/42W emergency* 2,2 Kg TS H * Permanent emergency with common neutral. Emergency version with separated neutrals available on request. NOTE CCT FLASH FLOOD when installed together with the low luminance grid the fixture becomes suitable for installation in work environments and conforms to European standard EN (luminance <1000 cd/m² at 65 in all directions, UGR <19) for the illumination of VDU workstations. SUPPLY INCLUDED (LxHxP) P L Electronic mono lamp 185x55x95 mm Dimmable 197x85x115 mm Ø Ø Ø H Electronic 2x18W and 2x26W 197x65x115 mm Electronic 2x32W and 2x42W 197x85x115 mm Electronic with emergency 197x85x115 mm Power supply specifications See page 402 ACCESSORIES See page DOWNLIGHTS DOWNLIGHTS 47

26 CCt FLASH LOW LUMINANCE Recessed downlight for compact fluorescent lamps. Body and bezel in white polycarbonate. Low luminance reflector in metallized polycarbonate, with highly-reflective Scratch Proof Formula lacquering. Rapid mounting system for false ceiling installation. Available with electronic, electronic dimmable 1-10V, digital dimmable DALI and permanent emergency power supplies. IP23 o TC-TEL SUPPLY WEIGHT CODE IP23 o TC-TEL SUPPLY WEIGHT CODE GX24q-2 1x 18W electronic 0,8 Kg TS EL GX24q-2 2x 18W electronic 1,3 Kg TS EL 75mm 185 1x 18W dimmable 1/10V 0,8 Kg TS 293 1x 18W dimmable DALI 0,8 Kg TS D 54002DA 75mm 200 2x 18W dimmable 1/10V 1,0 Kg TS 295 2x 18W dimmable DALI 1,0 Kg TS D 54006DA Ø 225 Ø 215 mm 1x 18W emergency* 2,7 Kg TS 293 GX24q-3 1x 26W electronic 0,8 Kg TS H 54010EL Ø 265 Ø 250 mm 2x 18W emergency* 1,9 Kg TS 295 GX24q-3 2x 26W electronic 1,3 Kg TS H 54012EL 1x 26W dimmable 1/10V 0,8 Kg TS D 2x 26W dimmable 1/10V 1,3 Kg TS D 1x 26W dimmable DALI 0,8 Kg TS DA 2x 26W dimmable DALI 1,3 Kg TS DA 1x 26W emergency* 2,7 Kg TS H 2x 26W emergency* 2,3 Kg TS H GX24q-3/4 1x 32/42W electr. multipower 0,8 Kg TS EL GX24q-3/4 2x 32/42W electr. multipower 1,7 Kg TS EL 1x 32/42W dimmable 1/10V 0,8 Kg TS D 75mm 240 2x 32/42W dimmable 1/10V 1,8 Kg TS D 1x 32/42W dimmable DALI 0,8 Kg TS DA 2x 32/42W dimmable DALI 1,8 Kg TS DA 1x 32/42W emergency* 2,5 Kg TS H Ø 265 Ø 250 mm 2x 32/42W emergency* 3,1 Kg TS H * Permanent emergency with common neutral. Emergency version with separated neutrals available on request. NOTE CCT FLASH LOW LUMINANCE is suitable for installation in work environments and conforms to European standard EN (luminance <1000 cd/m² at 65 in all directions, UGR <19) for the illumination of VDU workstations. SUPPLY INCLUDED (LxHxP) P L Electronic mono lamp 185x55x95 mm Dimmable 197x85x115 mm H Electronic 2x18W and 2x26W 197x65x115 mm Electronic 2x32W and 2x42W 197x85x115 mm Electronic with emergency 197x85x115 mm Power supply specifications See page 402 ACCESSORIES See page DOWNLIGHTS DOWNLIGHTS 49

27 CCt FLASH GREEN GENERATION FLOOD Recessed downlight for high efficacy compact fluorescent lamps. Body in polycarbonate, round bezel in polycarbonate with white finishing. Flood reflector in metallized polycarbonate, with highly-reflective Scratch Proof Formula lacquering. Rapid mounting system for false ceiling installation. Available with electronic, DALI dimmable, electronic emergency and DALI emergency power supplies. LOW LUMINANCE Recessed downlight for high efficacy compact fluorescent lamps. Body in polycarbonate, round bezel in polycarbonate with white finishing. Low luminance reflector in metallized polycarbonate, with highlyreflective Scratch Proof Formula lacquering. Rapid mounting system for false ceiling installation. Available with electronic, DALI dimmable, electronic emergency and DALI emergency power supplies. IP23 o TC-TEL SUPPLY WEIGHT CODE GR14 q 1x 14/17W electronic 0,6 Kg TS 579 1T2489 IP23 o TC-TEL SUPPLY WEIGHT CODE 75mm 100 1x 14/17W dimmable DALI 0,7 Kg TS 579 1T2491 GR14 q 1x 14/17W electronic 0,7 Kg TS 581 1T2481 Ø 185 Ø 175 mm 1x 14/17W emergency 1,3 Kg TS 579 1T mm 185 1x 14/17W dimmable DALI 0,8 Kg TS 581 1T2483 1x 14/17W DALI emergency 1,4 Kg TS 579 1T2492 1x 14/17W emergency 1,4 Kg TS 581 1T mm 100 2x 14/17W electronic 0,7 Kg TS 580 2x 14/17W dimmable DALI 0,8 Kg TS 580 1T2493 1T2495 Ø 225 Ø 215 mm 1x 14/17W DALI emergency 1,5 Kg TS 581 2x 14/17W electronic 0,8 Kg TS 582 1T2484 1T2485 Ø 225 Ø 215 mm 2x 14/17W emergency 1,4 Kg TS 580 1T mm 200 2x 14/17W dimmable DALI 0,9 Kg TS 582 1T2487 2x 14/17W DALI emergency 1,5 Kg TS 580 1T2496 2x 14/17W emergency 1,5 Kg TS 582 1T2486 Ø 265 Ø 250 mm 2x 14/17W DALI emergency 1,6 Kg TS 582 1T2488 NOTE CCT FLASH FLOOD when installed together with the low luminance grid the fixture becomes suitable for installation in work environments and conforms to European standard EN (luminance <1000 cd/m² at 65 in all directions, UGR <19) for the illumination of VDU workstations. NOTE CCT FLASH LOW LUMINANCE is suitable for installation in work environments and conforms to European standard EN (luminance <1000 cd/m² at 65 in all directions, UGR <19) for the illumination of VDU workstations. SUPPLY INCLUDED (LxHxP) SUPPLY INCLUDED (LxHxP) P L Electronic 123x22x78 mm Electronic with emergency 123x22x78 mm 197x85x115 mm P L Electronic 123x22x78 mm Electronic with emergency 123x22x78 mm 197x85x115 mm H Electronic dimmable 197x85x115 mm Dali with emergency 2x 197x85x115 mm H Electronic dimmable 197x85x115 mm Dali with emergency 2x 197x85x115 mm Power supply specifications See page 420 Power supply specifications See page 402 ACCESSORIES See page 58 ACCESSORIES See page 58 Ø Ø 50 DOWNLIGHTS DOWNLIGHTS 51

28 CCt FLASH SQUARE Recessed downlight for compact fluorescent lamps. Body and square bezel in white polycarbonate. Flood reflector in metallized polycarbonate, with highlyreflective Scratch Proof Formula lacquering. Rapid mounting system for false ceiling installation. Available with electronic, analog dimmable electronic 1-10V, digital dimmable DALI and permanent emergency power supplies. IP23 o TC-TEL SUPPLY WEIGHT CODE IP23 o TC-TEL SUPPLY WEIGHT CODE GX24q-2 1x 18W electronic 0,5 Kg TS 485 1T1215 GX24q-2 2x 18W electronic 0,5 Kg TS 486 1T1229 1x 18W dimmable 1/10V 1,2 Kg TS 485 1T1216 2x 18W dimmable 1/10V 1,6 Kg TS 486 1T1230 1x 18W dimmable DALI 1,2 Kg TS 485 1T1216DA 2x 18W dimmable DALI 1,6 Kg TS 486 1T1230DA 1x 18W emergency* 2,6 Kg TS 485 1T1217 2x 18W emergency* 2,6 Kg TS 486 1T1231 GX24q-3 1x 26W electronic 0,5 Kg TS 485 1T1219 GX24q-3 2x 26W electronic 0,5 Kg TS 487 1T1233 1x 26W dimmable 1/10V 1,4 Kg TS 485 1T1220 2x 26W dimmable 1/10V 1,6 Kg TS 487 1T1234 1x 26W dimmable DALI 1,4 Kg TS 485 1T1220DA 2x 26W dimmable DALI 1,6 Kg TS 487 1T1234DA 1x 26W emergency* 2,6 Kg TS 485 1T1221 2x 26W emergency* 3,0 Kg TS 487 1T1235 GX24q-3/4 1x 32/42W electr. multipower 0,5 Kg TS 485 1T1222 GX24q-3/4 2x 32/42W electr. multipower 0,5 Kg TS 487 1T1236 1x 32/42W dimmable 1/10V 1,6 Kg TS 485 1T1223 2x 32/42W dimmable 1/10V 1,8 Kg TS 487 1T1237 1x 32/42W dimmable DALI 1,6 Kg TS 485 1T1223DA 2x 32/42W dimmable DALI 1,8 Kg TS 487 1T1237DA 1x 32/42W emergency* 2,8 Kg TS 485 1T1224 2x 32/42W emergency* 3,0 Kg TS 487 1T1238 * Permanent emergency with common neutral. Emergency version with separated neutrals available on request. SUPPLY INCLUDED (LxHxP) P L Electronic mono lamp 155x20x40 mm Dimmable 197x85x115 mm H Electronic 2x18W and 2x26W 155x20x40 mm Electronic 2x32W and 2x42W 197x85x115 mm Electronic with emergency 197x85x115 mm Ø Ø Ø ACCESSORIES IP44 Polycarbonate screen Transparent Central sanding 1T1242 1T1243 Power supply specifications See page DOWNLIGHTS DOWNLIGHTS 53

29 CCt FLASH GREEN GENERATION SQUARE Recessed downlight for high efficacy compact fluorescent lamps. Body in polycarbonate, square bezel in polycarbonate with white finishing. Flood reflector in metallized polycarbonate, with highly-reflective Scratch Proof Formula lacquering. Rapid mounting system for false ceiling installation. Available with electronic, DALI dimmable, electronic emergency and DALI emergency power supplies. IP23 o TC-TEL SUPPLY WEIGHT CODE GR14 q 1x 14/17W electronic 0,6 Kg TS 583 1x 14/17W dimmable DALI 0,7 Kg TS 583 1x 14/17W emergency 1,1 Kg TS 583 1x 14/17W DALI emergency 1,2 Kg TS 583 2x 14/17W electronic 0,6 Kg TS 584 2x 14/17W dimmable DALI 0,7 Kg TS 584 2x 14/17W emergency 1,2 Kg TS 584 2x 14/17W DALI emergency 1,3 Kg TS 584 1T2497 1T2499 1T2498 1T2500 1T2501 1T2503 1T2502 1T2504 SUPPLY INCLUDED (LxHxP) P L H Electronic 123x22x78 mm Electronic dimmable 197x85x115 mm Electronic with emergency 123x22x78 mm 197x85x115 mm Dali with emergency 2x 197x85x115 mm ACCESSORIES IP44 Polycarbonate screen Transparent Central sanding 1T1242 1T1243 Power supply specifications See page 402 Ø Ø 54 DOWNLIGHTS DOWNLIGHTS 55

30 CCt WALL WASHER Asymmetric recessed downlight for compact fluorescent lamps. White polycarbonate body and die-cast aluminium ring painted white. Metallized polycarbonate asymmetric reflector with highly-reflective Scratch Proof Formula lacquering. Rapid mounting system for false ceiling installation. Available with electronic and digital dimmable DALI power supplies. Asymmetric recessed downlight for compact fluorescent lamps. White polycarbonate body and die-cast aluminium ring painted white. Metallized polycarbonate asymmetric reflector with highly-reflective Scratch Proof Formula lacquering. Rapid mounting system for false ceiling installation. Available with electronic and digital dimmable DALI power supplies. IP23 o TC-DEL SUPPLY WEIGHT CODE IP23 o TC-DEL SUPPLY WEIGHT CODE G24q-2 2x 18W electronic 1,5 Kg TS EL G24q-2 2x 18W electronic 2,9 Kg TS EL 75mm 150 2x 18W dimmable DALI 1,5 Kg TS 278 G24q-3 2x 26W electronic 2,1 Kg TS DA 46970EL 75mm 190 2x 18W dimmable DALI 2,9 Kg TS 277 G24q-3 2x 26W electronic 3,1 Kg TS DA 46990EL Ø 275 Ø 260 mm 2x 26W dimmable DALI 2,1 Kg TS DA Ø 275 Ø 260 mm 2x 26W dimmable DALI 3,1 Kg TS DA SUPPLY INCLUDED (LxHxP) SUPPLY INCLUDED (LxHxP) P L Electronic dual lamp 2x 18/26W 155x20x40 mm P L Electronic dual lamp 2x 18/26W 155x20x40 mm H Dimmable 197x85x115 mm H Dimmable 197x85x115 mm Power supply specifications See page 402 Power supply specifications See page DOWNLIGHTS DOWNLIGHTS 57

31 CCt ACCESSORIES CCT FLASH LOW LUMINANCE with radial grid FLOOD MONOLAMP FLOOD BILAMP LOW LUMINANCE MONOLAMP LOW LUMINANCE MONOLAMP WALL WASHER Tempered glass, flush mounting, silk screen printed or sandblasted at the centre Silk screened Sandblasted Silk screened Sandblasted Silk screened Sandblasted Silk screened Sandblasted IP24 Tempered glass, protruded mounting, silk screen printed or sandblasted at the centre Silk screened Sandblasted Silk screened Sandblasted Silk screened Sandblasted Silk screened Sandblasted IP44 CCT FLASH FLOOD with anti-glare grid Polycarbonate IP44 screen, transparent or sandblasted at the centre 2. 1T1172 Transparent 1T1244 Sandblasted 1T1173 Transparent 1T1245 Sandblasted 1T1173 Transparent 1T1245 Sandblasted 1T1174 Transparent 1T1246 Sandblasted IP44 Decorative ring made of white or frosted coloured polycarbonate White Blue White Blue White Blue White Blue White Blue CCT FLASH LOW LUMINANCE with anti-glare grid Decorative ring made of metal with chrome, aluminium and brushed steel finishings Chrome 54090L Aluminium 1T1462 Brushed steel Chrome 54091L Aluminium 1T1463 Brushed steel Chrome 54091L Aluminium 1T1463 Brushed steel Chrome 54092L Aluminium 1T1464 Brushed steel Chrome 54092L Aluminium 1T1464 Brushed steel Decorative cylindrical component made of transparent sandblasted polycarbonate. 10 cm Anti-glare grid made of polycarbonate CCT FLASH FLOOD with silk screened glass Radial anti-glare grid made of polycarbonate for visual comfort Refractive screen. Transparent CCT FLASH FLOOD with sandblasted glass Plate for plank ceiling mounting L=290 mm Ø 172 mm L=390 mm Ø 172 mm L=290 mm Ø 212 mm L=390 mm Ø 212 mm L=290 mm Ø 212 mm L=390 mm Ø 212 mm L=290 mm Ø 252 mm L=390 mm Ø 252 mm L=290 mm Ø 252 mm L=390 mm Ø 252 mm IP54 Kit Silicone sealing kit for round ring. 1T2418 1T2418 1T2418 1T2418 IP54 The IP54 degree of protection is obtained through the combination of the silicone kit with the protective screens IP44. 1 IP44 protection degree is obtained by combining the decorative ring, made of polycarbonate, and the borosilicate glass. 2 Cannot be mounted together with the decorative metal ring. 3 It can only be used together with flush glass. 4 Cannot be installed on the 2 x32/42w versions. 5 The plates with a side measurement of 290 mm can be installed on planks having a 300 or 100 mm opening and take up the space of 1 or 3 components, respectively. The plates with a side measurement of 390 mm can be installed on planks having a 200 mm opening and take up the space of 2 components. 58 DOWNLIGHTS DOWNLIGHTS 59

32 NO SIGN PLASTERS DOWNLIGHT WITH PLASTER FRAME A series of fixtures designed to blend in with the architecture discreetly illuminating any environment. Each fitting has a plaster frame which is to be plastered to the false ceiling; this frame can either be painted or adorned with typical indoor decorations, thereby completely blending in with the surrounding architecture. KRIPTON VERSIONS KRIPTON combines the soft lines of the plaster frame with a series of high performance fixtures able to satisfy any requirement. The core technology is the same as that which is employed for all Targetti fixtures: quality of materials, professional optical systems and a wide selection of sizes, power supplies and light sources. The fixture is available in versions for halogen, metal halide and fluorescent lamps, as well as s. The optics are available in all beam angles, in order to best satisfy every design requirement. HELIUM VERSIONS Patrizia Pepe Store - Florence, Italy Round recessed fixtures with square and defined edges frames; this is what characterises the HELIUM downlight series. A series of plaster-framed recessed units which maintain all of the performance characteristics of normal downlights, but with an innovative design. 60 DOWNLIGHTS DOWNLIGHTS 61

33 kripton FLOOD Recessed downlight for plasterboard false ceilings for compact fluorescent lamps. Body in polycarbonate. Flood reflector in metallized polycarbonate, with highly-reflective Scratch Proof Formula lacquering. To be completed with plaster bezel to be plastered into gypsum-board ceiling. Available with electronic 220/240V, dimmable electronic 1/10V and permanent emergency power supplies. LOW LUMINANCE Recessed low luminance downlight for plasterboard false ceilings for compact fluorescent lamps. Body in polycarbonate. Flood reflector in metallized polycarbonate, with highly-reflective Scratch Proof Formula lacquering. To be completed with plaster bezel to be plastered into gypsum-board ceiling. Available with electronic 220/240V, dimmable electronic 1/10V and permanent emergency power supplies. IP23 o TC-TEL SUPPLY WEIGHT CODE IP23 o TC-TEL SUPPLY WEIGHT CODE GX24 q-2 2x18W electronic 1,1 Kg TS 294 1V7491 GX24 q-2 2x18W electronic 1,2 Kg TS 295 1V mm 167 2x18W emergency* 1,3 Kg TS 294 1V mm 275 2x18W emergency* 1,6 Kg TS 295 1V mm Ø 367mm 2x18W dimmable elect. 1,1 Kg TS 294 GX24 q-3 2x26W electronic 1,1 Kg TS 294 1V7493 1V mm Ø 407mm 2x18W dimmable elect. 1,2 Kg TS 295 GX24 q-3 2x26W electronic 1,2 Kg TS 295 1V7507 1V mm 2x26W emergency* 1,3 Kg TS 294 1V mm 2x26W emergency* 1,6 Kg TS 295 1V7510 2x26W dimmable elect. 1,1 Kg TS 294 1V7497 2x26W dimmable elect. 1,2 Kg TS 295 1V7511 GX24 q-3/4 2x32/42W electr. multipower 1,1 Kg TS 307 1V7498 GX24 q-3/4 2x32/42W electr. multipower 1,2 Kg TS 308 1V7512 2x32/42W emergency* 1,3 Kg TS 307 1V7499 2x32/42W emergency* 1,6 Kg TS 308 1V7513 2x32/42W dimmable elect. 1,1 Kg TS 307 1V7500 2x32/42W dimmable elect. 1,2 Kg TS 308 1V7514 PLASTER WEIGHT CODE PLASTER WEIGHT CODE 3,6 Kg 1V7543 4,4 Kg 1V7544 * Permanent emergency with common neutral. Emergency version with separated neutrals available on request. * Permanent emergency with common neutral. Emergency version with separated neutrals available on request. ACCESSORIES ACCESSORIES IP43 o Glass sandblasted screen 1V7134S IP43 o Glass sandblasted screen 1V7134 Ø Ø 62 DOWNLIGHTS DOWNLIGHTS 63

34 HELIUM FLOOD Recessed flood downlight with plaster frame for false ceilings installation for compact fluorescent lamps. Polycarbonate body and plaster frame. Flood reflector in metallized polycarbonate, with highly-reflective Scratch Proof Formula lacquering. To be completed with plaster frame to be plastered to the false-ceiling. Available with electronic, dimmable electronic 1/10V and permanent emergency power supplies. The permanent emergency version is complete with common neutral, this version is available on request with separated neutrals. LOW LUMINANCE Recessed low luminance downlight with plaster farme for false ceilings installation for compact fluorescent lamps. Polycarbonate body and sharp edges rectangular plaster frame. Low luminance reflector in metallized polycarbonate, with highly-reflective Scratch Proof Formula lacquering. To be completed with plaster frame to be plastered to the false-ceiling. Available with integrated electronic, dimmable electronic 1/10V and permanent emergency power supplies. The permanent emergency version is complete with common neutral, this version is also available with separated neutrals on request. IP23 o TC-TEL SUPPLY WEIGHT CODE IP23 o TC-TEL SUPPLY WEIGHT CODE GX24 q-2 2x18W electronic 1,1 Kg TS 294 1V7491 GX24 q-2 2x18W electronic 1,2 Kg TS 295 1V mm mm 310mm 2x18W emergency* 1,3 Kg TS 294 2x18W dimmable elect. 1,1 Kg TS 294 1V7492 1V mm mm 2x18W emergency* 1,6 Kg TS 295 2x18W dimmable elect. 1,2 Kg TS 295 1V7506 1V GX24 q-3 2x26W electronic 1,1 Kg TS 294 1V mm GX24 q-3 2x26W electronic 1,2 Kg TS 295 1V x26W emergency* 1,3 Kg TS 294 1V x26W emergency* 1,6 Kg TS 295 1V7510 2x26W dimmable elect. 1,1 Kg TS 294 1V x26W dimmable elect. 1,2 Kg TS 295 1V7511 GX24 q-3/4 2x32/42W electr. multipower 1,1 Kg TS 307 1V7498 GX24 q-3/4 2x32/42W electr. multipower 1,2 Kg TS 308 1V7512 2x32/42W emergency* 1,3 Kg TS 307 1V7499 2x32/42W emergency* 1,6 Kg TS 308 1V7513 2x32/42W dimmable elect. 1,1 Kg TS 307 1V7500 2x32/42W dimmable elect. 1,2 Kg TS 308 1V7514 PLASTER WEIGHT CODE PLASTER WEIGHT CODE 2,7 Kg 1V7404 3,7 Kg 1V7405 * Permanent emergency with common neutral. Emergency version with separated neutrals available on request. * Permanent emergency with common neutral. Emergency version with separated neutrals available on request. ACCESSORIES ACCESSORIES IP43 o Glass sandblasted screen 1V7134S IP43 o Glass sandblasted screen 1V7134 Ø Ø 64 DOWNLIGHTS DOWNLIGHTS 65

35 HELIUM ASYMMETRIC Asymmetric-emission recessed fixture for plasterboard false ceilings for fluorescent lamps. The fixture consists of a metal body with an aluminium asymmetric reflector and a rectangular gypsum frame, which is to be plastered onto the plasterboard ceiling. Asymmetric emission for an even illumination of vertical surfaces. Electronic ballast. DICRO Recessed fixture for plasterboard false ceilings for halogen dichroic lamps. The fixture consists of a body and frame in a single plaster element with a square or round edge, which is to be plastered onto the plasterboard ceiling. Metal lamp support painted white. Transformer available as an accessory. IP23 o TC-L REFLECTOR SUPPLY WEIGHT CODE IP23 o QR-CB 51 Version WEIGHT CODE 2G11 24W asymmetric electronic 3,5 Kg VI 118 1V7400 GU 5.3 max 50W 12V square 0,5 Kg 1V W asymmetric electronic 4,8 Kg VI 118 1V mm max 50W 12V round 0,5 Kg 1V mm mm 70mm 123mm mm 118mm mm mm mm ø70mm 123mm mm 118mm REMOTE SUPPLY LxPxH CODE H P L Electronic transformer V/12V AC 50-60Hz dimmable TRIAC + IGBT 20-60W 94x20x31 mm W 118x21x35 mm DOWNLIGHTS DOWNLIGHTS 67

36 cct hi COMPACT RECESSED DOWNLIGHTS FOR HALOGEN AND METAL HALIDE LAMPS HIGH-Efficacy DOWNLIGHTS The high-efficacy, the reduced size and the perfect light diffusion, resulting from the convex faceted reflector, makes of CCT HI the most suitable tool for lighting large rooms, where higher illumination values and perfect light homogeneity are required. VISUAL COMFORT WITH ONLY 10 cm OF HEIGHT The use of double-ended light sources, together with the new generation of convex faceted optics, provide a diffused illumination, maintaining a high level of visual comfort, with only 10 cm of recessed height. HIGH QUALITY GLASS Accessories The attention to details, together with the quality of the materials employed, make the CCT HI a downlight which is capable of characterising the architectural context. The high quality and the thickness of the glass accessorie sincrease the aesthetic value of the fixture while providing a protection rating of IP44. 10,5 cm 68 DOWNLIGHTS DOWNLIGHTS 69

37 cct hi ROUND Recessed downlight for metal halide and halogen lamps. Body and round ring made of die-cast aluminium painted white. Flood reflector with convex facets made of facetteded anodised aluminium. Rapid mounting system for false ceiling installation. Magnetic and electronic Power supply available as an accessory. SQUARE Recessed downlight for metal halide and halogen lamps. Body and square ring made of die-cast aluminium painted white. Flood reflector with convex facets made of facetteded anodised aluminium. Rapid mounting system for false ceiling installation. Magnetic and electronic Power supply available as an accessory. IP23 1,2 o HIT-DE CODE 1,2 IP23 o HIT-DE CODE RX7s 70W TS 509 1T2136 RX7s 70W TS 510 1T2138 >100mm 150W TS 509 1T2137 >100mm 150W TS 510 1T mm 75mm 105 QT-DE 12 (114,2 mm) CODE mm QT-DE 12 (114,2 mm) CODE Ø 190 Ø 170 mm R7s max 160W TS 509 1T mm R7s max 160W TS 510 1T REMOTE SUPPLY LxPxH CODE REMOTE SUPPLY LxPxH CODE P L Magnetic power supply V 50/60 Hz 70W 150W 216x78x80 mm 216x78x80 mm P L Magnetic power supply V 50/60 Hz 70W 150W 216x78x80 mm 216x78x80 mm H Electronic power supply V 50/60 Hz 70W 150W 150x35x80 mm 210x35x80 mm 1T0501 1T0502 H Electronic power supply V 50/60 Hz 70W 150W 150x35x80 mm 210x35x80 mm 1T0501 1T0502 ACCESSORIES ACCESSORIES IP44 Trasparent glass with sandblasted edge 12 mm thickness 1T2142 IP44 Trasparent glass with sandblasted edge 12 mm thickness 1T2144 IP44 Sandblasted glass 12 mm thickness 1T2143 IP44 Sandblasted glass 12 mm thickness 1T2145 UV filter for HIT-DE version only Flush silk screen printed borosilicate glass Ø Flush borosilicate glass with central sandblast 1T2350 Ø Plate for plank ceiling mounting Plate for plank ceiling mounting depth. 290 mm depth. 390 mm DOWNLIGHTS DOWNLIGHTS 71

38 SMALL DOWNLIGHT

39 BeBOP RECESSED COMPACT RECESSED SMALL AND EFFICIENT Notwithstanding its small size, with just a 14W power source, BeBOP produces more light than a 50W dichroic halogen lamp, BeBOP s passive dissipation guarantees the will operate at a junction temperature below that specified by the manufacturer. This means the source maintains long-term health providing continued high quality performance even after thousands of hours of use. IP43 AND IP43 VERSIONS One version, two different power outputs, two color temperatures, all available both in the version with no screen and in the IP43 version available with the sandblasted screen. Performance and safety guaranteed. Real dimensions SOURCE BeBOP 40000h 9W 14W TRADITIONAL DICHROIC QR-CB h 35W 50W PLUG & LIGHT Quick connection system for easy and safe connection. The power supply, available as an accessory, is prewired and equipped with a easy plug connector. Art Room Alexander Bürkle - Freiburg Germany. Photo: Günther Lehnert COORDINATED SIMPLICITY BeBop is available in recessed, pendant and ceiling-mounted versions. See pag SMALL DOWNLIGHT SMALL DOWNLIGHT 75

40 BeBOP RECESSED Low luminance recessed compact downlight for lamps. Matt white painted polycarbonate body and rounded ring. Die-cast aluminium finned heat sink, side wiring complete with quick connection system for easy and safe connection to the power supply. Optical consists of extremely high efficiency matt aluminium reflector with a great light beam control. High power, available in three different colour temperatures, all within 3 MacAdam chromatic tollerance. Diffuse screen integrated for the IP43 version. Quick installation with springs for mounting into the false ceiling. Remote electronic driver available as an accessory. 0,3 SUPPLY COLOUR CODE REMOTE SUPPLY 250mA 400mA 9W electronic 250mA 2700K o TS 704 1T Power Supply Kit V AC 50/60Hz 1T4214 1T4215 9W electronic 250mA 3000K o TS 704 1T Pre-wired with a quick connection plug. DALI dimmable. hmin* 9W electronic 250mA 4000K o TS 704 1T3534 Power Supply Kit V AC 50/60Hz 1T3975 1T W electronic 400mA 2700K o TS 705 1T3535 Pre-wired with a quick connection plug. No dimmable 85,4 14W electronic 400mA 3000K o TS 705 1T W electronic 400mA 4000K o TS 705 1T3537 Accessories CODE 9W electronic 250mA 2700K IP43 o TS 706 9W electronic 250mA 3000K IP43 o TS 706 1T3538 1T3539 Synchronization cable Synchronizes the dimming between 2 drivers. It is possible to connect up to 10 driver in order to maintain a uniform effect for all fixtures. L.1500mm 1T W electronic 250mA 4000K IP43 o TS W electronic 400mA 2700K IP43 o TS 707 1T3540 1T3541 Quick connectin plug 1T4196 * 14W Versions: h min = 100mm IP43 14W electronic 400mA 3000K o TS 707 1T3542 Emergency kit IP43 14W electronic 400mA 4000K o TS 707 1T3543 Emergency + battery pack 3H 1T3144 TS ,5W TS ,2W The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site KELVIN 2700K 3000K 4000K KELVIN 2700K 3000K 4000K lm 883 lm 909 lm 735 lm 786 lm 809 lm lm 1507 lm 1552 lm 1256 lm 1342 lm 1382 lm EFFICACY 64 lm/w 68 lm/w 70 lm/w EFFICACY 77 lm/w 83 lm/w 85 lm/w 89% Imax 1511 cd/klm 45 IMAX 1247 cd 1334 cd 1374 cd 89% Imax 1366 cd/klm 49 IMAX 1926 cd 2059 cd 2120 cd TS ,5W TS ,2W KELVIN 2700K 3000K 4000K KELVIN 2700K 3000K 4000K lm 883 lm 909 lm 698 lm 746 lm 769 lm lm 1507 lm 1552 lm 1191 lm 1274 lm 1312 lm EFFICACY 61 lm/w 65 lm/w 67 lm/w EFFICACY 73 lm/w 79 lm/w 81 lm/w 85% Imax 1280 cd/klm 45 IMAX 1057 cd 1130 cd 1164 cd 85% Imax 1118 cd/klm 48 IMAX 1575 cd 1685 cd 1735 cd 76 SMALL DOWNLIGHT SMALL DOWNLIGHT 77

41 QUICK Compact recessed fixture TECHNOLOGY AND PASSIVE DISSIPATION The latest generation and passive dissipation for QUICK, Targetti s small downlight, is available in two power ranges - 9W and 14W warm white. The intelligent heat management and a specifically developed advanced optic system, which enhance the sources performance, are in fact the fixtures strengths and answer the ever more stringent regulations with regards to energy efficiency. recessed Low luminance recessed small downlight. Metallised polycarbonate body with decorative ring in anodised aluminium or painted white. Finned heat sink made of die-cast aluminium, side exit of the wiring complete with a quick-connection system to the power supply. Optic system consisting of upper reflector in aluminium providing maximum light efficiency and beam control. Anti-glare lower reflector in high-resistant policarbonate with internal polished metalisation. Builtin diffusive screen in sandblasted polycarbonate. Quick connector with springs for ceiling mounting. Remote electronic driver available as an accessory. 0,2 IP44 o SUPPLY RING COLOUR CODE h min* 9W electronic 250mA white 3000K TS 674 1T3040 VISUAL COMFORT PLUG & LIGHT IP44 PROTECTION A CONCRETE ALTERNATIVE TO TRADITIONAL SOURCES Inherently energy efficient, QUICK compares favorably with traditional sources also due to the superior chromatic rendering and the quality of light emission, which is enhanced by the special gloss metalized reflector. The 9W version ensures the same quantity and quality provided by a 35W dichroic halogen lamp, whereas the 14W version is better still: the light effect is very much the same as a 50W dichroic lamp, with the a higher luminous flux. 9W 14W 14W electronic 250mA electronic 400mA electronic 400mA aluminium white aluminium 3000K 3000K 3000K TS 674 TS 675 TS 675 1T3041 1T3044 1T3045 * 14W Versions: h min = 100mm REMOTE SUPPLY 250mA 400mA Power Supply Kit V AC 50/60Hz 1T4214 1T Pre-wired with a quick connection plug. DALI dimmable. TRADITIONAL DICHROIC Power Supply Kit V AC 50/60Hz 1T3975 1T3976 NO MAINTENANCE REQUIRED ENERGY SAVING EASY DIMM SOURCE QUICK 40000h 9W 14W QR-CB h 35W 50W Pre-wired with a quick connection plug. No dimmable. Accessories Synchronization cable Synchronizes the dimming between 2 drivers. It is possible to connect up to 10 driver in order to maintain a uniform effect for all fixtures. L.1500mm CODE 1T2833 Quick connectin plug 1T4196 PLUG & LIGHT Quick connection system for easy and safe connection. The power supply, available as an accessory, is prewired and equipped with a easy plug connector. Emergency kit Emergency + battery pack 3H 1T3144 TS ,5W TS ,2W KELVIN 3000K KELVIN 3000K lm 710 lm lm 1207 lm EFFICACY 62 lm/w EFFICACY 74 lm/w Imax 1695 cd/klm 45 IMAX 1203 cd Imax 1535 cd/klm 48 IMAX 1853 cd SMALL DOWNLIGHT 79

42 BTT RECESSED MICRO Recessed downlight for halogen dichroic lamps. Die-cast aluminium body and metal painted ring. Recessed lamp position by means of a black PPS antiglare ring with a bayonet connection. The lamp can be quickly replaced with no need for tools and without dismounting the fixture. Recessed mini downlight for wall or ceiling installation for monochromatic sources. Diecast aluminium finned body to ensure perfect heat dissipation. Hreaded ring nut for quick installation. equipped with lens. Installation by means of pressure. Pre-wired with a 20 cm cable. IP23 o QR-CB 51 RING COLOUR WEIGHT CODE 0,03 OPTIC COLOUR CODE GU 5.3 max 50W 12V round aluminium 0,1 Kg ,2W WFL 3000K TS 617 1T2347 max 50W 12V round chrome 0,1 Kg ,2W WFL 4000K TS 617 1T2348 max 50W 12V round white 0,1 Kg max 50W 12V square aluminium 0,2 Kg max 50W 12V square white 0,2 Kg max 50W 12V square brushed steel 0,2 Kg 1T1731 REMOTE SUPPLY LxPxH CODE REMOTE SUPPLY (LxHxP) 350mA H P L Electronic transformer V/12V AC 50-60Hz dimmable TRIAC + IGBT 20-60W 94x20x31 mm W 118x21x35 mm IP Electronic power supply 15W V 50/60Hz Allows to feed up to 10 MICRO connected in series in constant current. 1T1757 TS cd/1000lm Imax K 49 cd 4000K 62 cd 80 SMALL DOWNLIGHT SMALL DOWNLIGHT 81

43 RECESSED PROJECTORS

44 CCTLed ARCHITECTURAL FIXED AND ADJUSTABLE RECESSED PROJECTOR THE SOLUTION FOR ARCHITECTURAL ILLUMINATION CCTLed ARCHITECTURAL is the latest addition to the CCTLed family. With the innovative downlight features, common denominators of all CCTLed products, which include the construction system, the size (same mounting diameter), the original heat sink and platform, this new low luminance version is particularly suitable for professional architectural illumination, providing high performance, precision and versatility. A complex optic system, four different beam widths, interchangeable reflectors and rings answering individual architectural project requirements and light engineering. PROJECT ORIENTED SOLUTIONS CCTLed ARCHITECTURAL is designed with the architectural project in mind, which is why one of its top features is the option of defining the aesthetic characteristics through the choice of 4 different secondary reflectors, without modifying the light emission in any way. The standard product is always supplied with a secondary reflector in metallized polycarbonate and matt finish, but can also be equipped with the specular aluminum version, the matt white finished version or the black matt solution for an all black finish. The different versions may be combined with the black or white, square or rounded rings in the CLASSIC version, or with the colour of the plaster ceilings for the TRIMLESS version. Integrating light into architecture has never been so simple. 84 RECESSED PROJECTORS RECESSED PROJECTORS 85

45 CCTLed ARCHITECTURAL PROFESSIONAL, COMPACT AND HIGH PERFORMING Available in 2200 and 3200 lumen sources for both the fixed and adjustable versions, CCTLed ARCHITECTURAL s compactness sets it apart. With only maximum 151 mm in depth, and 160 mm in diameter they can guarantee a very low luminance. CLASSIC AND TRIMLESS Two versions for two different architectural solutions. The CLASSIC version with two interchangeable rings (round and squared edged), and the TRIMLESS version with no visible ring. The installing procedure is the same for both versions: quick and easy thanks to the patented spring mechanism. The first is completed with the selected ring, the second requires no installation template and is finished by smooth plastering. CCTLed Architectural Diameter Ø 160mm Recessed depth H. 142mm fixed version H. 151mm adjustable version Fixture s luminous flux 25W > 2300lm 32W > 2900lm Colour temperature 2700K, 3000K, 4000K Optics Spot, Flood, Medium Wide Flood, Wide Flood CUTTING-EDGE OPTICAL SOLUTIONS One of the strengths of CCT architectural is its optical system which is composed of three different elements: the optic chamber, the grooved collar and the secondary reflector. The heart of the system is the extractable and interchangeable optic chamber which contains the different optics with four different beam widths. The optic is locked to the cup by the use of a protective front element. The different accessories can be added simply by inserting them directly between the two main elements of the cup for a completely clean and secure effect. QUICK AND USER FRIENDLY INSTALLATION The installation is identical for all versions: simple and quick by means of the patented new springs. The sliding of the brackets along a rack rod with an automatic progressive lock, provides a secure and immediate positioning of the fixture. MODULATE WITH EASE All the CCTLed collection fixtures a choice of five different power supplies. Electronic, dimmable 1/10V which can be modulated with a touch dimm switch and DALI dimmable for more complex where the whole lighting installation may be digitally programmed and controlled. A complete emergency 1 or 3 hours kit is available for all of the above. LONG TERM RELIABILITY As with the Downlight versions, the long term maintained performances of the source are guaranteed by the dissipation system. A distinctive feature both for its design and for the performance it guarantees. The source, available in 2200 and 3200lm operates at a junction temperature far below that specified by the manufacturer, therefore guaranteeing a constant performance in time. ZOOM AND CUT OFF FOR HIGHLY PROFESSIONAL RESULTS CCTLed ARCHITECTURAL can be equipped with two unique optic accessories. The CUT OFF considerably reduces the fall-off component, focusing the emission. The ZOOM is designed with a sophisticated system of lenses capable of defining a very precise and well distributed beam around the object, with a manually adjustable diameter. ZOOM CUT OFF RECESSED PROJECTORS 87

46 CCTLed ARCHITECTURAL PROGRAM FIXED Low luminance fixed recessed spotlight. Black painted die-cast aluminium body and heat sink. Black polycarbonate interface. Warm white (2700K and 3000K) or neutral white (4000K) high output with Ra 84; Ra97 on request. Polycarbonate secondary reflector with matt metallized lower finish and antiglare grooved black upper finish. Primary optical assembly complete with precision optic with convex facets, made of metallized polycarbonate and available in Spot, Flood, Medium wide flood and Wide flood versions. Scratch Proof Formula treatment with high reflectance mirror effect. Tool-free ultra-fast mounting system into false ceilings measuring from 0.5 to 30 mm. To be completed with decorative ring. Passive dissipation system. Pre-wired with 450mm cable and plug for a quick and safe, tool-free connection to the driver. Remote power supply kit available in versions: basic electronic, 1/10V dimmable and DALI dimmable. Emeregency kit with 3h battery. 1,0 0,45m IP23 o OPTIC COLOR CURRENT CODE Power supply 700mA 900mA 25W SP 2700K 700mA TS 736 1T Electronic V 1T2963 1T mm 500mm 25W SP 3000K 700mA TS W SP 4000K 700mA TS 736 1T3106 1T Electronic 1/10V + touch dimm V DALI dimmable electronic V 1T2964 1T2965 1T2967 1T W FL 2700K 700mA TS 737 1T3549 Ø 175 Ø 160 mm 25W FL 3000K 700mA TS W FL 4000K 700mA TS 737 1T3110 1T3111 Emergency kit Emergency + battery pack 3h CODE 1T W MWFL 2700K 700mA TS 738 1T W MWFL 3000K 700mA TS 738 1T3114 Synchronization cable CODE Ø 85 25W MWFL 4000K 700mA TS W WFL 2700K 700mA TS 739 1T3115 1T3553 Synchronizes the dimming between 2 drivers. It is possible to connect up to 10 driver in order to maintain a uniform effect for all fixtures. 1T W WFL 3000K 700mA TS W WFL 4000K 700mA TS 739 1T3118 1T3119 Accessories See page 98 32W SP 2700K 900mA TS 732 1T W SP 3000K 900mA TS 732 1T W SP 4000K 900mA TS 732 1T3109 Rings 32W FL 2700K 900mA TS 733 1T3550 White 1T2933 White 1T W FL 3000K 900mA TS W FL 4000K 900mA TS 733 1T3112 1T3113 Rounded ring Black 1T3529 Squared ring Black 1T W MWFL 2700K 900mA TS 734 1T W MWFL 3000K 900mA TS 734 1T3116 Plaster ring White 1T W MWFL 4000K 900mA TS 734 1T W WFL 2700K 900mA TS W WFL 3000K 900mA TS W WFL 4000K 900mA TS 735 1T3554 1T3120 1T3121 Secondary accessory reflectors Specular Black 1T3138 1T3139 White 1T RECESSED PROJECTORS RECESSED PROJECTORS 89

47 CCTLed ARCHITECTURAL TRIMLESS PROGRAM FIXED Low luminance trimless fixed recessed spotlight for plasterboard false ceilings. White anodised die-cast aluminium body and black painted die-cast aluminium heat sink. Black polycarbonate interface. Warm white (2700K and 3000K) or neutral white (4000K) high output with Ra84; Ra 97 on request. Polycarbonate secondary reflector with matt metallized lower finish and anti-glare texturised black upper finish. Primary optical assembly complete with precision optic with convex facets, made of metallized polycarbonate and available in Spot, Flood, Medium wide flood and Wide flood versions. Scratch Proof Formula treatment with high level mirror effect. Ultra rapid tools free mounting system for false ceiling installation from 0,5 to 30mm. No installation template required. Passive dissipation system. Equipped with cable (450mm) and plug for easy and safe connection to the driver. To be completed with power supply, available in electronic, electronic dimmable 1/10V and DALI dimmable. Emeregency kit with 3h battery. 1,0 0,45m IP23 o OPTIC COLOR CURRENT CODE Power supply 700mA 900mA 25W SP 2700K 700mA TS 736 1T Electronic V 1T2963 1T W SP 3000K 700mA TS 736 1T Electronic 1/10V + touch dimm V 1T2964 1T mm 500mm 25W SP 4000K 700mA TS W FL 2700K 700mA TS 737 1T3123 1T3565 DALI dimmable electronic V 1T2965 1T W FL 3000K 700mA TS 737 1T3126 Emergency kit CODE Ø 175 Ø 160 mm 25W FL 4000K 700mA TS W MWFL 2700K 700mA TS 738 1T3127 1T3567 Emergency + battery pack 3h 1T W MWFL 3000K 700mA TS 738 1T3130 Synchronization cable CODE Ø 85 25W MWFL 4000K 700mA TS W WFL 2700K 700mA TS 739 1T3131 1T3569 Synchronizes the dimming between 2 drivers. It is possible to connect up to 10 driver in order to maintain a uniform effect for all fixtures. 1T W WFL 3000K 700mA TS 739 1T W WFL 4000K 700mA TS 739 1T3135 Accessories See page 98 32W SP 2700K 900mA TS 732 1T W SP 3000K 900mA TS 732 1T W SP 4000K 900mA TS 732 1T W FL 2700K 900mA TS 733 1T W FL 3000K 900mA TS 733 1T W FL 4000K 900mA TS 733 1T3129 Secondary accessories reflectors 32W MWFL 2700K 900mA TS 734 1T3568 Specular 1T W MWFL 3000K 900mA TS 734 1T3132 Black 1T W MWFL 4000K 900mA TS 734 1T3133 White 1T W WFL 2700K 900mA TS 735 1T W WFL 3000K 900mA TS 735 1T W WFL 4000K 900mA TS 735 1T RECESSED PROJECTORS RECESSED PROJECTORS 91

48 CCTLed ARCHITECTURAL PROGRAM ADJUSTABLE Low luminance fixed recessed spotlight. Black painted die-cast aluminium body and heat sink. Black polycarbonate interface. Warm white (2700K and 3000K) or neutral white (4000K) high output with Ra84; Ra 97 on request. Polycarbonate secondary reflector with matt metallized lower finish and anti-glare grooved black upper finish. Primary optical assembly complete with precision optic with convex facets, made of metallized polycarbonate and available in Spot, Flood, Medium wide flood and Wide flood versions. Scratch Proof Formula treatment with high reflectance mirror effect. Adjustable 355 in the horizontal plane and 30 in the vertical plane with micrometric aiming system. Double aiming lock. Tool-free ultra-fast mounting system into false ceilings measuring from 0.5 to 30 mm. To be completed with decorative ring. Passive dissipation system. Pre-wired with 450mm cable and plug for a quick and safe, toolfree connection to the driver. Remote power supply kit available in versions: basic electronic, 1/10V dimmable and DALI dimmable. Emeregency kit with 3h battery. 1,0 0,45m IP23 o OPTIC COLOR CURRENT CODE Power supply 700mA 900mA mm 30 25W SP 2700K 700mA TS W SP 3000K 700mA TS W SP 4000K 700mA TS 736 1T3555 1T3074 1T Electronic V Electronic 1/10V + touch dimm V DALI dimmable electronic V 1T2963 1T2964 1T2965 1T2966 1T2967 1T mm W FL 2700K 700mA TS 737 1T W FL 3000K 700mA TS 737 1T3078 Emergency kit CODE Ø 175 Ø 160 mm 25W FL 4000K 700mA TS 737 1T3079 Inverter + Battery pack 3h 1T W MWFL 2700K 700mA TS 738 1T W MWFL 3000K 700mA TS 738 1T3082 Synchronization cable CODE Ø 85 25W MWFL 4000K 700mA TS W WFL 2700K 700mA TS 739 1T3083 1T3561 Synchronizes the dimming between 2 drivers. It is possible to connect up to 10 driver in order to maintain a uniform effect for all fixtures. 1T W WFL 3000K 700mA TS W WFL 4000K 700mA TS 739 1T3086 1T3087 Accessories See page 98 32W SP 2700K 900mA TS 732 1T W SP 3000K 900mA TS 732 1T W SP 4000K 900mA TS 732 1T3077 Rings 32W FL 2700K 900mA TS 733 1T3558 White 1T2933 White 1T W FL 3000K 900mA TS W FL 4000K 900mA TS 733 1T3080 1T3081 Rounded ring Black 1T3529 Squared ring Black 1T W MWFL 2700K 900mA TS 734 1T W MWFL 3000K 900mA TS 734 1T3084 Plaster ring White 1T W MWFL 4000K 900mA TS 734 1T W WFL 2700K 900mA TS W WFL 3000K 900mA TS W WFL 4000K 900mA TS 735 1T3562 1T3088 1T3089 Secondary accessory reflectors Specular Black 1T3138 1T3139 White 1T RECESSED PROJECTORS RECESSED PROJECTORS 93

49 CCTLed ARCHITECTURAL TRIMLESS PROGRAM ADJUSTABLE Low luminance trimless adjustable recessed spotlight for plasterboard false ceilings. White anodised die-cast aluminium body and black painted die-cast aluminium heat sink. Black polycarbonate interface. Warm white (2700K and 3000K) or neutral white (4000K) high output with Ra84; Ra97 on reuqest. Polycarbonate secondary reflector with matt metallized lower finish and anti-glare texturised black upper finish. Black polycarbonate primary optical assembly complete with precision optic with convex facets, made of metallized polycarbonate and available in Spot, Flood, Medium wide flood and Wide flood versions. Scratch Proof Formula treatment with high level mirror effect. Adjustable 355 in the horizontal plane and 30 in the vertical plane with micrometric adjustment system. Double aiming lock. Ultra rapid tools free mounting system for false ceiling installation from 0,5 to 30mm. No installation template required. Passive dissipation system. Equipped with cable (450mm) and plug for easy and safe connection to the driver. To be completed with power supply, available in electronic, electronic dimmable 1/10V and DALI dimmable. Emeregency kit with 3h battery. 1,0 0,45m IP23 o OPTIC COLOR CURRENT CODE Power supply 700mA 900mA mm 30 25W SP 2700K 700mA TS W SP 3000K 700mA TS W SP 4000K 700mA TS 736 1T3571 1T3090 1T Electronic V Electronic 1/10V + touch dimm V DALI dimmable electronic V 1T2963 1T2964 1T2965 1T2966 1T2967 1T mm W FL 2700K 700mA TS 737 1T W FL 3000K 700mA TS 737 1T3094 Emergency kit CODE Ø 175 Ø 160 mm 25W FL 4000K 700mA TS 737 1T3095 Emergency + battery pack 3h 1T W MWFL 2700K 700mA TS 738 1T W MWFL 3000K 700mA TS 738 1T3098 Synchronization cable CODE Ø 85 25W MWFL 4000K 700mA TS W WFL 2700K 700mA TS 739 1T3099 1T3577 Synchronizes the dimming between 2 drivers. It is possible to connect up to 10 driver in order to maintain a uniform effect for all fixtures. 1T W WFL 3000K 700mA TS W WFL 4000K 700mA TS 739 1T3102 1T3103 Accessories See page 98 32W SP 2700K 900mA TS 732 1T W SP 3000K 900mA TS 732 1T W SP 4000K 900mA TS 732 1T W FL 2700K 900mA TS 733 1T W FL 3000K 900mA TS 733 1T3096 Secondary accessories reflectors 32W FL 4000K 900mA TS 733 1T3097 Specular 1T W MWFL 2700K 900mA TS 734 1T3576 Black 1T W MWFL 3000K 900mA TS 734 1T3100 White 1T W MWFL 4000K 900mA TS 734 1T W WFL 2700K 900mA TS 735 1T W WFL 3000K 900mA TS 735 1T W WFL 4000K 900mA TS 735 1T RECESSED PROJECTORS RECESSED PROJECTORS 95

50 CCTLed ARCHITECTURAL TS ,4W TS ,4W KELVIN 2700K 3000K 4000K KELVIN 2700K 3000K 4000K lm 2610 lm 2688 lm 2086 lm 2219 lm 2285 lm lm 2610 lm 2688 lm 2076 lm 2209 lm 2275 lm EFFICACY 73 lm/w 78 lm/w 80 lm/w EFFICACY 73 lm/w 78 lm/w 80 lm/w Imax 7829 cd/klm 14 IMAX cd cd cd Imax 2943 cd/klm 28 IMAX 7219 cd 7680 cd 7910 cd TS ,4W TS ,4W KELVIN 2700K 3000K 4000K KELVIN 2700K 3000K 4000K lm 2610 lm 2688 lm 2131 lm 2267 lm 2335 lm lm 2610 lm 2688 lm 2162 lm 2300 lm 2369m EFFICACY 75 lm/w 80 lm/w 82 lm/w EFFICACY 76 lm/w 81 lm/w 83 lm/w Imax 1655 cd/klm 45 IMAX 4059 cd 4318 cd 4447 cd Imax 1142 cd/klm 59 IMAX 2801 cd 2980 cd 3069 cd TS W TS W KELVIN 2700K 3000K 4000K KELVIN 2700K 3000K 4000K lm 3200 lm 3296 lm 2558 lm 2721 lm 2803 lm lm 3200 lm 3296 lm 2546 lm 2709 lm 2790 lm EFFICACY 71 lm/w 76 lm/w 78 lm/w EFFICACY 71 lm/w 75 lm/w 77 lm/w Imax 7829 cd/klm 14 IMAX cd cd cd Imax 2943 cd/klm 28 IMAX 8852 cd 9417 cd 9700 cd TS W TS W KELVIN 2700K 3000K 4000K KELVIN 2700K 3000K 4000K lm 3200 lm 3296 lm 2614 lm 2781 lm 2864 lm lm 3200 lm 3296 lm 2651 lm 2820 lm 2905 lm EFFICACY 73 lm/w 77 lm/w 80 lm/w EFFICACY 74 lm/w 78 lm/w 81 lm/w Imax 1655 cd/klm 45 IMAX 4977 cd 5295 cd 5454 cd Imax 1142 cd/klm 59 IMAX 3435 cd 3655 cd 3764 cd The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site Opera House Theater - Florence, Italy Project: ABDR Associati - Lighting design: Studio Baldieri - Photographer: Luigi Filetici 96 RECESSED PROJECTORS RECESSED PROJECTORS 97

51 CCTLed ARCHITECTURAL OPTICAL ACCESSORIES Chromatic filters Interference flat glass filters. Tone filters Interference flat glass filters to vary the colour temperature of light. Blade light filter Grooved refractive glass filter. This makes the beam take on an oval shape and when combined with narrow beams, the light blade appears more prominent. Red Green Blue Yellow Magenta Gold Cold Peach 1T3424 1T3425 1T3426 1T3427 1T3428 1T3431 1T3429 1T3430 1T3141 Diffusive filter Microprismatic refractive flat glass filter. This softens the luminous effect. 1T3140 Anti-glare grid Black lacquered metal honeycomb grid. 1T3423 Cut-off Tube Allows for the beam to be focused while removing the fall-off component. 1T3142 Zoom Allows for the beam to be manually focused and shaped into different dimensions through the use of a system of lenses, resulting in a very uniform and defined effect. 1T3432 Installation accessories Ø 232 Ø 139 Retrofit kit for CCTLed* Outer ring in white polycarbonate with bayonet locking system. Suitable for recessing holes between 190 and 215mm. Metal body complete with rapid mounting system for false ceilings between 1 and 25mm thick. The accessory in not compatible with the decorative rings available for CCTLed. 1T3725 IP54 ring* Squared ring with transparent screen 1T2937 * Accessories not compatible with the Trimless versions. Power supply accessoires Synchronization cable Synchronizes the dimming between 2 drivers. It is possible to connect up to 10 driver in order to maintain a uniform effect for all fixtures. L T2833 Opera House Theater - Florence, Italy Project: ABDR Associati - Lighting design: Studio Baldieri - Photographer: Luigi Filetici 98 RECESSED PROJECTORS RECESSED PROJECTORS 99

52 CCTLed ARCHITECTURAL MINI CLASSIC TRIMLESS TWO OPTICAL SYSTEMS CCTLed Architectural Mini is fitted with two different optical systems. The first has aluminium micro optics for high performance (up to 90 lm/w) with soft, wide beams. The second has new PMMA lenses for more defined, precise beams where precision is a fundamental design requirement. - Die-cast aluminium heat sink with a separate optical chamber. The adjustable version can move up to 30 - Proprietary lenses and optics for different light effects - Removable front to mount various accessories - Injection moulded polymer frame - Interchangeable internal reflectors - Decorative rings in different shapes and sizes NEW COMPACT VERSIONS FOR THE CCT RANGE Quality effects especially for architectural design. This is the mission for the new recessed downlight, CCTLed Architectural Mini by Targetti. It gets its purpose, design philosophy and flexibility from the larger version combined with its reduced size, two different optical systems for five different light effects and a series of rings and reflectors to customize it elegantly. ONE DIAMETER, DIFFERENT SOLUTIONS CCTLed Architectural Mini is available with different power outputs, two different heights and multiple configurations, but with the same recess dimensions. Fixed or adjustable versions with mechanical aiming and locking system, trimless finish and classic finish with dedicated rings and reflectors of various colours for the classic finish. All can be fitted with two different optical systems that produce multiple light effects: clean and precise or soft, wide beams. Schorndorf Town hall, Stuttgart, Germany - interior design: Ippolito Fleitz Group, Germany - Photographer: Zooey Braun 100 RECESSED PROJECTORS RECESSED PROJECTORS 101

53 CCTLed ARCHITECTURAL MINI HIGH QUALITY The sources in the CCTLed Architectural Mini are among the best on the market, available in two different colour temperatures (3000K and 4000K), with Ra 80 and supplied with higher colour rendering on request; together with the optical systems means maximum efficiency in a small dimension. PINHOLE RINGS FOR ACCENTUATED EFFECTS If you are looking for a more precise, punctual effect and full camouflage of the unit the pinhole configuration is the ideal choice. Two different rings, one for the fixed version and one for the adjustable version for a highly controlled luminance without any blurred edges. A highly professional effect with a small footprint. RINGS AND REFLECTORS FOR A DIFFERENT DRESS One of the qualities of CCTLed Mini is its ability to always appear differently. It knows how to be discrete and camouflage with the architecture with its trimless finish or acquire a more decisive character when accessorised with different reflectors and coordinated rings. White, black and the new gold and copper reflectors for elegant solutions with a certain value. White and black round and square rings for architectural projects and the retail sector. FLEXIBLE FEEDING INCLUDED CCTLed Architectural Mini comes equipped with a driver. Available in an electronic or dimmable DALI version for maximum control of lighting management. 102 RECESSED PROJECTORS RECESSED PROJECTORS 103

54 CCTLed ARCHITECTURAL MINI FIXED 0,5 IP43 o Optic with convex facets OPTIC COLOR SUPPLY COD. Low luminance recessed projector. Painted black die-cast aluminium heat sink. White polycarbonate body for trimless installations in plasterboard false ceilings or with a decorative ring accessory for standard installations. High output in warm white (3000K) or neutral white (4000K) with Ra84; Ra97 on request. Secondary reflector in painted white polycarbonate matt aluminium. Optical unit complete with removable front ring to insert dedicated optical accessories, fitted with methacrylate lenses in the Spot and Flood versions or precision optics with polished anodised aluminium convex facets for the Medium wide flood and Wideflood versions. Rapid mounting system with springs for installation in false ceilings from 0, 5 to 25mm. Passive dissipation system. Complete with driver for the basic electronic and the dimmable DALI versions V 50/60Hz Ø 105 mm 12W MWFL 3000K electronic TS C03 12W MWFL 4000K electronic TS C03 12W MWFL 3000K DALI TS C03 12W MWFL 4000K DALI TS C03 17W MWFL 3000K electronic TS C05 17W MWFL 4000K electronic TS C05 17W MWFL 3000K DALI TS C05 17W MWFL 4000K DALI TS C05 17W WFL 3000K electronic TS C06 17W WFL 4000K electronic TS C06 1T4652 1T4653 1T4654 1T4655 1T4660 1T4661 1T4662 1T4663 1T4664 1T W WFL 3000K DALI TS C06 1T4666 Optic with methacrylate lens 17W WFL 4000K DALI TS C06 1T4667 0,5 IP43 o 250 OPTIC COLOR SUPPLY COD. 11W SP 3000K electronic TS C01 1T W SP 4000K electronic TS C01 1T4645 Trimless version doesn t need the ring accessory W SP 3000K DALI TS C01 1T W SP 4000K DALI TS C01 1T4647 Rings 12W FL 3000K electronic TS C02 1T4648 White 1T Ø 105 mm 12W FL 4000K electronic TS C02 12W FL 3000K DALI TS C02 12W FL 4000K DALI TS C02 1T4649 1T4650 1T4651 Round ring Black 1T W SP 3000K electronic TS C04 18W SP 4000K electronic TS C04 18W SP 3000K DALI TS C04 1T4656 1T4657 1T4658 Sqaured ring White Black 1T4698 1T W SP 4000K DALI TS C04 1T4659 White 1T4700 Pinhole ring Black 1T4701 TS C ,6W KELVIN 3000K 4000K 1189 lm 1241 lm 889 lm 928 lm TS C ,1W KELVIN 3000K 4000K 1469 lm 1532 lm 1052 lm 1097 lm TS C ,1W KELVIN 3000K 4000K 1469 lm 1532 lm 1216 lm 1268 lm Round ring (IP54) White Black 1T4704 1T4705 EFFICACY 71 lm/w 74 lm/w EFFICACY 75 lm/w 78 lm/w EFFICACY 86 lm/w 90 lm/w Imax 9470 cd/klm 15 IMAX cd cd Imax 2624 cd/klm 30 IMAX 3853 cd 4019 cd Imax 1372 cd/klm 48 IMAX 2015 cd 2102 cd Secondary accessories reflectors TS C04 21,2W TS C05 20,1W TS C06 20,1W White 1T KELVIN 3000K 4000K 1936 lm 2019 lm 1420 lm 1481 lm KELVIN 3000K 4000K 2150 lm 2242 lm 1699 lm 1772 lm KELVIN 3000K 4000K 2150 lm 2242 lm 1725 lm 1799 lm Refletcor Black Copper 1T4707 1T4708 Imax 5902 cd/klm 20 EFFICACY 67 lm/w 70 lm/w IMAX cd cd Imax 1368 cd/klm 46 EFFICACY 84 lm/w 88 lm/w IMAX 2941 cd 3067 cd Imax 927 cd/klm 60 EFFICACY 86 lm/w 89 lm/w IMAX 1993 cd 2079 cd Gold 1T RECESSED PROJECTORS RECESSED PROJECTORS 105

55 CCTLed ARCHITECTURAL MINI Optic with convex facets ADJUSTABLE Low luminance recessed adjustable projector. Painted black die-cast aluminium heat sink. Black polycarbonate interface. White polycarbonate body for trimless installations in plasterboard false ceilings or with a decorative ring accessory for standard installations. High output in warm white (3000K) or neutral white (4000K) with Ra 84; Ra 97 on request. Secondary reflector in painted white polycarbonate matt aluminium. Optical unit complete with removable front ring to insert dedicated optical accessories, fitted with methacrylate lenses in the Narrow Spot, Spot and Flood versions or precision optics with polished anodised aluminium convex facets for the Medium wide flood and Wideflood versions. Adjustable horizontally to 355 and vertically to 30 with a micrometric aiming system. Beam locking. Rapid mounting system with springs for installation in false ceilings from 0, 5 to 25mm. Passive dissipation system. Complete with driver for the basic electronic and dimmable DALI versions V 50/60Hz IP43 0,5 o , Ø 105 mm 60 Trimless version doesn t need the ring accessory. OPTIC COLOR SUPPLY COD. 12W 12W 12W 12W 17W 17W 17W 17W 17W 17W 17W 17W MWFL MWFL MWFL MWFL MWFL MWFL MWFL MWFL WFL WFL WFL WFL 3000K 4000K 3000K 4000K 3000K 4000K 3000K 4000K 3000K 4000K 3000K 4000K electronic electronic DALI DALI electronic electronic DALI DALI electronic electronic DALI DALI TS C03 TS C03 TS C03 TS C03 TS C05 TS C05 TS C05 TS C05 TS C06 TS C06 TS C06 TS C06 1T4680 1T4681 1T4682 1T4683 1T4688 1T4689 1T4690 1T4691 1T4692 1T4693 1T4694 1T4695 Optic with methacrylate lens Rings 0,5 IP43 o OPTIC COLOR SUPPLY COD. White 1T ,0 3W NSP 3000K electronic TS C07 3W NSP 4000K electronic TS C07 1T4668 1T4669 Round ring Black 1T W NSP 3000K DALI TS C07 3W NSP 4000K DALI TS C07 1T4670 1T4671 Squared ring White 1T W SP 3000K electronic TS C01 1T4672 Black 1T W SP 4000K electronic TS C01 1T Ø 105 mm 11W SP 3000K DALI TS C01 11W SP 4000K DALI TS C01 1T4674 1T4675 Pinhole ring White Black 1T4702 1T W FL 3000K electronic TS C02 1T W FL 4000K electronic TS C02 1T4677 White 1T W FL 3000K DALI TS C02 12W FL 4000K DALI TS C02 1T4678 1T4679 Round ring (IP54) Black 1T W SP 3000K electronic TS C04 18W SP 4000K electronic TS C04 1T4684 1T4685 Secondary accessories reflectors TS C01 12,6W 18W SP 3000K DALI TS C04 1T4686 White 1T KELVIN 3000K 4000K 1189 lm 1241 lm 889 lm 928 lm 18W SP 4000K DALI TS C04 1T4687 Reflector Black Copper 1T4711 1T4712 Imax 9470 cd/klm 15 EFFICACY 71 lm/w 74 lm/w IMAX cd cd Gold 1T4713 TS C02 14,1W TS C03 14,1W TS C04 21,2W TS C05 20,1W TS C06 20,1W TS C07 3,3W KELVIN 3000K 4000K KELVIN 3000K 4000K KELVIN 3000K 4000K KELVIN 3000K 4000K KELVIN 3000K 4000K KELVIN 3000K 4000K lm 1532 lm 1052 lm 1097 lm lm 1532 lm 1216 lm 1268 lm lm 2019 lm 1420 lm 1481 lm lm 2242 lm 1699 lm 1772 lm lm 2242 lm 1725 lm 1799 lm lm 212 lm 170 lm 180 lm EFFICACY 75 lm/w 78 lm/w EFFICACY 86 lm/w 90 lm/w EFFICACY 67 lm/w 70 lm/w EFFICACY 84 lm/w 88 lm/w EFFICACY 86 lm/w 89 lm/w EFFICACY 51 lm/w 55 lm/w Imax 2624 cd/klm 30 IMAX 3853 cd 4019 cd Imax 1372 cd/klm 48 IMAX 2015 cd 2102 cd Imax 5902 cd/klm 20 IMAX cd cd Imax 1368 cd/klm 46 IMAX 2941 cd 3067 cd Imax 927 cd/klm 60 IMAX 1993 cd 2079 cd Imax cd/klm 6 IMAX 7115 cd 7542 cd 106 RECESSED PROJECTORS RECESSED PROJECTORS 107

56 ARC FIXED AND ADJUSTABLE RECESSED PROJECTOR FOR HALOGEN AND METAL HALIDE LAMPS PROFESSIONAL The ARC family provides superior technical performances and the best optical solutions for both light control and visual comfort. Highly versatile, providing both traditional and innovative optics system, the ARC system guarantees high performances with maximum visual comfort thanks to the various optical solutions available. Countless functional solutions and possible applications to offer a comprehensive range of professional recessed spotlights. Elliptical Mirror OPTICS More than 1000 convex ellipsoidal facets for the new optics allowing a perfect management of lighting reflections in all directions. Each reflected ray has a different angle of incidence, resulting into a fan of light that guarantees maximum homogeneity of the light beam. Facets with nearly flat cross-sections provide for spot effects, maintaining narrow and controlled beams; while facets with marked ellipsoidal convexity provide for flood effects, where the light diffuses and dissolves in an imperceptible way. invisible ring A series of fixtures designed to blend in with the architecture and decisively illuminate any room. High performance and precision units for minimalist and geometric spaces, equipped with a support counter-ring which is installed and plastered to the false ceiling, thereby disappearing from view. Casa Bosque de Santa Fe Project: Arch. Enrique Bardasano - Lighting design: Alfredo Morayta 108 RECESSED PROJECTORS RECESSED PROJECTORS 109

57 ARC FIXED Fixed recessed low luminance projector for halogen and metal halide lamps. Anodized aluminium fixture body with white varnished die-cast aluminium ring. Louvered die cast aluminium heat sink. In all versions the optic system consists of an anti-glare reflector in polished anodized aluminium, in the discharge versions, this is integrated with precision optics with elliptic convex facets, anti glare spill-ring and extra clear prismatic safety glass. Rapid mounting system for false ceiling installation. Remote power supply system available as an accessory. ADJUSTABLE Adjustable recessed low luminance projector for halogen and metal halide lamps. Anodized aluminium fixture body with white varnished die-cast aluminium ring. Louvered die cast aluminium heat sink. In all versions the optic system consists of anti-glare projector in polished anodized aluminium, in the discharge versions, this is integrated with precision optics with elliptic convex facets, anti glare spill-ring and extra clear prismatic safety glass. Rapid mounting system for false ceiling installation. 355 adjustable on the horizontal plan and 30 on the vertical one by friction. Remote power supply system available as an accessory. IP23 IP23 0,8 o 0,8 o HIT-CE OPTIC CODE HIT-CE OPTIC CODE G12 35/50/70/100/150W SP TS G12 35/50/70/100/150W SP TS mm /50/70/100/150W FL TS /50/70/100/150W MWFL TS T mm /50/70/100/150W FL TS /50/70/100/150W MWFL TS T2463 Ø 190 Ø 180 mm 35/50/70/100/150W WFL TS Ø 190 Ø 180 mm 35/50/70/100/150W WFL TS Complete with prismatic safety glass. Complete with prismatic safety glass. IP23 IP23 0,7 o QR111 0,7 o CODE QR111 CODE G53 max 100W 12V G53 max 100W 12V mm mm 197 Ø 190 Ø 180 mm Ø 190 Ø 180 mm REMOTE SUPPLY LxPxH CODE P L 35W 214x79x79 mm H Magnetic power supply V 50/60 Hz 70W 214x79x79 mm W 214x79x79 mm W 150x35x80 mm 1T0500 Electronic power supply V 50/60 Hz 70W 150x35x80 mm 1T W 150W 185x33x96 mm 210x35x80 mm 1T2531 1T0502 Electronic transformer /12V AC 50/60 Hz dimmable TRIAC + IGBT W 118x21x35 mm Accessories See page RECESSED PROJECTORS RECESSED PROJECTORS 111

58 ARC TRIMLESS FIXED Fixed trimless recessed low luminance projector for plasterboard false ceilings for halogen and metal halide lamps. Anodized aluminium fixture body with patented mounting system using a white varnished pressure die-cast aluminium template for false ceiling installation. Louvered die cast aluminium heat sink. In all versions the optic system consists of an anti-glare reflector in polished anodized aluminium, in the discharge versions, this is integrated with precision optics with elliptic convex facets, anti glare spill-ring and extra clear prismatic safety glass. Remote power supply system available as an accessory. ADJUSTABLE Adjustable trimless recessed low luminance projector for plasterboard false ceilings for halogen and metal halide lamps. Anodized aluminium fixture body with patented mounting system using a white varnished pressure die-cast aluminium template for false ceiling installation. Louvered die cast aluminium heat sink. In all versions the optic system consists of an anti-glare reflector in polished anodized aluminium, in the discharge versions, this is integrated with precision optics with elliptic convex facets, anti glare spill-ring and extra clear prismatic safety glass. 355 adjustable on the horizontal plan and 30 on the vertical one by friction. Remote power supply system available as an accessory. IP23 IP23 0,8 o 0,8 o HIT-CE OPTIC CODE HIT-CE OPTIC CODE G12 35/50/70/100/150W SP TS 557 1T1194 G12 35/50/70/100/150W SP TS 561 1T mm /50/70/100/150W FL TS /50/70/100/150W MWFL TS 559 1T1195 1T mm /50/70/100/150W FL TS /50/70/100/150W MWFL TS 563 1T1179 1T2466 Ø 146 Ø 236 Ø 170 mm 35/50/70/100/150W WVFL TS 560 Complete with prismatic safety glass. 1T1196 Ø 146 Ø 236 Ø 170 mm 35/50/70/100/150W WFL TS 564 Complete with prismatic safety glass. 1T1180 IP23 IP23 0,7 o QR111 0,7 o CODE QR111 CODE G53 max 100W 12V 1T2465 G53 max 100W 12V 1T mm mm 197 Ø 146 Ø 170 mm Ø 146 Ø 170 mm Ø 236 Ø 236 REMOTE SUPPLY LxPxH CODE P L 35W 214x79x79 mm H Magnetic power supply V 50/60 Hz 70W 214x79x79 mm W 214x79x79 mm W 150x35x80 mm 1T0500 Electronic power supply V 50/60 Hz 70W 150x35x80 mm 1T W 150W 185x33x96 mm 210x35x80 mm 1T2531 1T0502 Electronic transformer /12V AC 50/60 Hz dimmable TRIAC + IGBT W 118x21x35 mm Accessories See page RECESSED PROJECTORS RECESSED PROJECTORS 113

59 ARC KRIPTON FIXED Fixed recessed low luminance projector for plasterboard false ceilings for halogen and metal halide lamps. Anodized aluminium fixture body. To be completed with plaster bezel, to be installed into gypsum-board ceiling, on which the fixture is to be fixed through springs. Louvered die cast aluminium heat sink. In all versions the optic system consists of an anti-glare reflector in polished anodized aluminium, in the discharge versions, this is integrated with precision optics with elliptic convex facets, anti glare spill-ring and extra clear prismatic safety glass. Remote power supply system available as an accessory. ADJUSTABLE Adjustable recessed low luminance projector for plasterboard false ceilings for halogen and metal halide lamps. Anodized aluminium fixture body. To be completed with plaster bezel to be installed into gypsumboard ceiling on which the fixture is to be fixed through springs. Louvered die cast aluminium heat sink. In all versions the optic system consists of anti-glare projector in polished anodized aluminium, in the discharge versions, this is integrated with precision optics with elliptic convex facets, anti glare spill-ring and extra clear prismatic safety glass. 355 adjustable on the horizontal plan and 30 on the vertical one by friction. Remote power supply system available as an accessory. IP23 IP23 3,6 o 3,6 o HIT-CE OPTIC CODE PLASTER CODE HIT-CE OPTIC CODE PLASTER CODE G12 35/50/70/100/150W SP TS V7613 G12 35/50/70/100/150W SP TS V mm /50/70/100/150W FL TS /50/70/100/150W MWFL TS T mm /50/70/100/150W FL TS /50/70/100/150W MWFL TS T /50/70/100/150W WFL TS /50/70/100/150W WFL TS mm 357mm Ø 367mm Complete with prismatic safety glass. 190mm 357mm Ø 367mm Complete with prismatic safety glass. IP23 3,0 IP23 o QR111 CODE o 3,0 PLASTER CODE QR111 CODE PLASTER CODE G53 max 100W V7613 G53 max 100W 12V V mm 75mm mm 357mm Ø 367mm 190mm 357mm Ø 367mm REMOTE SUPPLY LxPxH CODE P L 35W 214x79x79 mm H Magnetic power supply V 50/60 Hz 70W 214x79x79 mm W 214x79x79 mm W 150x35x80 mm 1T0500 Electronic power supply V 50/60 Hz 70W 150x35x80 mm 1T W 150W 185x33x96 mm 210x35x80 mm 1T2531 1T0502 Electronic transformer /12V AC 50/60 Hz dimmable TRIAC + IGBT W 118x21x35 mm Accessories See page RECESSED PROJECTORS RECESSED PROJECTORS 115

60 ARC WALL WASHER Asymmetric recessed projector for metal halide lamps. Body in anodized aluminium. Louvered die cast aluminium heat sink. Visible ring in white varnished die-cast aluminium. Asymmetric reflector in polished aluminium made up of a unique element which guarantees the asymmetry of the light beam and its aperture parallely to the wall. Completed with a semi-diffusing refractive screen for a perfect lighting distribution. Remote power supply system available as an accessory. 1,2 IP23 o HIT-CE OPTIC CODE G12 35/50/70/100/150W WW TS 556 1T2413 >10mm for 150W Complete with safety glass. 75mm 217 Ø 190 Ø 180 mm REMOTE SUPPLY LxPxH CODE P L 35W 214x79x79 mm H Magnetic power supply V 50/60 Hz 70W 214x79x79 mm W 214x79x79 mm W 150x35x80 mm 1T0500 Electronic power supply V 50/60 Hz 70W 150x35x80 mm 1T W 150W 185x33x96 mm 210x35x80 mm 1T2531 1T0502 THE WASH LIGHT EFFECT The complexity of vertical surface lighting calls for the use of particularly precise geometries of the reflectors, as well as for the use of specially treated materials for the optical components. The ARC range is completed with the metal halide wall washer version, with optical systems which have been optimised for various light sources, for creating extremely uniform light distribution upon the entire wall. 116 RECESSED PROJECTORS RECESSED PROJECTORS 117

61 ARC TRIMLESS ARC KRIPTON WALL WASHER Asymmetric trimless recessed projector for metal halide lamps. Anodized aluminium fixture body with patented mounting system using a white varnished pressure die-cast aluminium template for false ceiling installation. Louvered die cast aluminium heat sink. Asymmetric reflector in polished aluminium made up of a unique element which guarantees the asymmetry of the light beam and its aperture parallely to the wall. Completed with a semi-diffusing refractive screen for a perfect lighting distribution. Remote power supply system available as an accessory. WALL WASHER Asymmetric recessed projector for plasterboard false ceilings for metal halide lamps. Body in anodized aluminium. Louvered die cast aluminium heat sink. To be completed with plaster bezel, to be installed into gypsum-board ceiling, on which the fixture is to be fixed through springs. Asymmetric reflector in polished aluminium made up of a unique element which guarantees the asymmetry of the light beam and its aperture parallely to the wall. Completed with a semi-diffusing refractive screen for a perfect lighting distribution. Remote power supply system available as an accessory. 1,2 IP43 o HIT-CE OPTIC CODE G12 35/50/70/100/150W WW TS 556 1T2467 4,0 IP43 o HIT-CE OPTIC CODE PLASTER CODE 75mm 216 Complete with safety glass. 75mm G12 35/50/70/100/150W WW TS 556 Complete with safety glass. 1T2413 1V7613 Ø 146 Ø 236 Ø 170 mm 221 REMOTE SUPPLY LxPxH CODE P L 35W 214x79x79 mm mm 357mm Ø 367mm H Magnetic power supply V 50/60 Hz 70W 214x79x79 mm REMOTE SUPPLY LxPxH CODE 150W 214x79x79 mm P L 35W 214x79x79 mm W 150x35x80 mm 1T0500 H Magnetic power supply V 50/60 Hz 70W 214x79x79 mm Electronic power supply V 50/60 Hz 70W 150x35x80 mm 1T W 214x79x79 mm W 185x33x96 mm 1T W 150x35x80 mm 1T W 210x35x80 mm 1T0502 Electronic power supply V 50/60 Hz 70W 150x35x80 mm 1T W 150W 185x33x96 mm 210x35x80 mm 1T2531 1T RECESSED PROJECTORS RECESSED PROJECTORS 119

62 ARC DEEp Professional recessed projector for metal halide and halogen lamps. Aluminium body black painted. Diecast aluminium external ring white painted. Optical system made up of upper elliptical reflector in textured metallized aluminium and lower reflector in metallized aluminium. Fixed version for halogen lamp, tilting version for metal halide lamp with rotation on slide +/-30 and aiming lock. Complete with transparent borosilicate protection glass. 1,2 IP43 o HIT-CE OPTIC VERSION CODE G12 150W FL tilting TS mm 277 To be completed with remote power supply. Ø 190 Ø 170 mm REMOTE SUPPLY LxPxH CODE P L Magnetic power supply V 50/60 Hz 150W 214x79x79 mm H Electronic power supply V 50/60 Hz 150W 210x35x80 mm 1T Walker St - Sidney, Australia. Project: DJC LIGHTING FOR LARGE SPACES The ARC DEEP double optical focus system, resulting from the combination of two different reflectors (the first one elliptical and the second one parabolic), controls the beam of light to illuminate from great heights while guaranteeing maximum visual comfort and completely eliminating glare. 120 RECESSED PROJECTORS RECESSED PROJECTORS 121

63 MINIARC FIXED AND ADJUSTABLE RECESSED PROJECTOR FOR, HALOGEN AND METAL HALIDE LAMPS Big performance in a small format, for the Targetti family of recessed projectors with very small dimensions. This is a valuable combination from a project point of view, that characterizes both the innovative versions and the versions for halogen and discharge lamps. Even the classic version of MINIARC for 70W discharge lamps confirms Targetti natural vocation to innovation. Wherever high performance and extremely small dimensions are required, MINIARC always guarantees precise light beams and high optical efficacy. TWO SUPER-PERFORMING VERSIONS Despite its compact size, the specifications of MINIARC make it an authentically professional projector, one of the highest performing luminaires in its category. Two power ratings (9W and 14W), both characterised by the same design, the same small size (the recess hole measures just 10cm in diameter and 13cm in depth ) and the same high quality of light sources. The level of performance is excellent and longlasting, both in terms of efficacy and energy saving. FITTED IN A MOMENT, LASTS A LIFETIME With its installation springs and driver quick connection plug, fitting the new MINIARC is very simple. And once it s mounted, you can simply forget about it, as its s have a lifespan of no less than hours, so the small, recessed luminaire by Targetti needs practically no maintenance at all. WASH LIGHT EFFECT A Wall Washer version of MINIARC is also available. The effect is the result of the combination of a properly aligned Spot reflector with a parallel prism glass lens, which allows to wash small and medium sized walls. PASSIVE DISSIPATION MINIARC has been developed paying special attention to thermal management. The heat produced is dissipated passively and needs no fan, thus contributing to the high level of performance during time. THE MINIARC NO SIGN VERSION MINIARC not only means performance and precision but also architectural harmony. The NO SIGN plaster version blends in to its surroundings effortlessly and clean lines and simplicity prevail in the trimless version. 122 RECESSED PROJECTORS RECESSED PROJECTORS 123

64 MINIARC FIXED Fixed recessed professional projector. Finned heat sink in die-cast aluminium. Decorative ring in die-cast aluminium with white paint finish. Optic system consisting of lower reflector in specular metallized polycarbonate, anti-glare upper reflector in aluminium with opaque finish, main faceted optic in pure high reflectance aluminum and textured glass for light mixing. Side exit of the wiring complete with a quick-connection system to the power supply system for connecting to the electic outlet. Quick connector with springs for ceiling mounting. Remote electronic driver available as an accessory. ADJUSTABLE Adjustable recessed professional projector. Finned heat sink in die-cast aluminium. Decorative ring in die-cast aluminium with white paint finish. Optic system consisting of lower reflector in specular metallized polycarbonate, anti-glare upper reflector in aluminium with opaque finish, main faceted optic in pure high reflectance aluminium and textured glass for light mixing. 359 adjustable on the horizontal plan and 30 on the vertical one with mechanical aiming locking system. Side exit of the wiring complete with a quick-connection system to the power supply system for connecting to the electic outlet. Quick connector with springs for ceiling mounting. Remote electronic driver available as an accessory. IP43 IP23 0,6 o SUPPLY OPTIC COLOUR CODE 0,6 o SUPPLY OPTIC COLOUR CODE 9W electronic 250mA FL 3000K TS 677 1T3050 9W electronic 250mA SP 3000K TS 676 1T mm h 128 9W electronic 250mA FL 4000K TS W electronic 400mA FL 3000K TS W electronic 400mA FL 4000K TS 678 1T3051 1T3052 1T mm h 132 9W electronic 250mA FL 3000K TS 677 9W electronic 250mA SP 4000K TS 676 9W electronic 250mA FL 4000K TS 677 1T3055 1T3056 1T3057 Ø 114 Ø 105 mm Ø 114 Ø 105 mm Available until June 2015 * versions 14W h min= 50mm * versions 14W h min= 50mm 14W electronic 400mA SP 3000K TS W electronic 400mA FL 3000K TS W electronic 400mA SP 4000K TS W electronic 400mA FL 4000K TS 678 Available until June T3058 1T3059 1T3060 1T3061 REMOTE SUPPLY 250mA 400mA Power Supply Kit V AC 50/60Hz 1T4214 1T Pre-wired with a quick connection plug. DALI dimmable. Power Supply Kit V AC 50/60Hz 1T3975 1T3976 Pre-wired with a quick connection plug. No dimmable TS ,5W KELVIN 3000K 4000K TS ,5W KELVIN 3000K 4000K Accessories CODE lm 909 lm 764 lm 782 lm lm 909 lm 764 lm 782 lm Synchronization cable Synchronizes the dimming between 2 drivers. It is possible to connect up to 10 driver in order to maintain a uniform effect for all fixtures. L.1500mm 1T2833 EFFICACY 66 lm/w 68 lm/w EFFICACY 66 lm/w 68 lm/w Quick connectin plug 1T4196 Imax 4983 cd/klm 15 IMAX 3806 cd 3897 cd Imax 2999 cd/klm 26 IMAX 2291 cd 2345 cd TS ,2W TS ,2W Emergency kit KELVIN 3000K 4000K 1507 lm 1552 lm 1124 lm 1158 lm KELVIN 3000K 4000K 1507 lm 1552 lm 1187 lm 1223 lm Emergency + battery pack 3H 1T3144 Imax 2690 cd/klm 30 EFFICACY 69 lm/w 71 lm/w IMAX 3025 cd 3114 cd Imax 3589 cd/klm 22 EFFICACY 73 lm/w 75 lm/w IMAX 4261 cd 4388 cd The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site RECESSED PROJECTORS RECESSED PROJECTORS 125

65 MINIARC TRIMLESS FIXED Fixed trimless recessed professional projector for plasterboard false ceilings. Finned dissipation body in die-cast aluminium. Patented mounting system using a white varnished pressure die cast aluminium template for false ceiling installation. Optic system consisting of lower reflector in shiny metallized polycarbonate, anti-glare upper reflector in aluminium with opaque finish, main faceted optic in pure aluminium with maximum luminance and textured glass for light mixing. Side exit on the power cord with quick-connect system for connecting to the electric outlet. Quick installation for mounting to the ceiling. Remote electronic driver available as an accessory. ADJUSTABLE Adjustable trimless recessed professional projector for plasterboard false ceilings. Finned dissipation body in die-cast aluminium. Patented mounting system using a white varnished pressure die cast aluminium template for false ceiling installation. Optic system consisting of lower reflector in shiny metallized polycarbonate, anti-glare upper reflector in aluminium with opaque finish, main facetted optic in pure aluminium with maximum luminance and textured glass for light mixing. 359 adjustable on the horizontal plan and 30 on the vertical one with mechanical aiming locking system. Side exit on th epower cord with quick-connect system for connecting to the electric outlet. Quick installation for mounting to the ceiling. Remote electronic driver available as an accessory. IP43 IP23 0,6 o SUPPLY OPTIC COLOUR CODE 0,6 o SUPPLY OPTIC COLOUR CODE 9W electronic 250mA FL 3000K TS 677 1T3062 9W electronic 250mA SP 3000K TS 676 1T3066 h 9W electronic 250mA FL 4000K TS 677 1T h 9W electronic 250mA FL 3000K TS 677 1T mm W electronic 400mA FL 3000K TS W electronic 400mA FL 4000K TS 678 1T3064 1T mm 132 9W electronic 250mA SP 4000K TS 676 9W electronic 250mA FL 4000K TS 677 1T3068 1T3069 Ø 99 Ø 100 mm Available until June 2015 Ø 99 Ø 100 mm Ø 149 Ø 149 * versions 14W h min= 50mm * versions 14W h min= 50mm 14W electronic 400mA SP 3000K TS W electronic 400mA FL 3000K TS W electronic 400mA SP 4000K TS W electronic 400mA FL 4000K TS 678 Available until June T3070 1T3071 1T3072 1T3073 REMOTE SUPPLY 250mA 400mA Power Supply Kit V AC 50/60Hz 1T4214 1T Pre-wired with a quick connection plug. DALI dimmable. Power Supply Kit V AC 50/60Hz 1T3975 1T3976 Pre-wired with a quick connection plug. No dimmable. TS ,5W TS ,5W Accessories CODE KELVIN 3000K 4000K 883 lm 909 lm 764 lm 782 lm EFFICACY 66 lm/w 68 lm/w KELVIN 3000K 4000K 883 lm 909 lm 764 lm 782 lm EFFICACY 66 lm/w 68 lm/w Synchronization cable Synchronizes the dimming between 2 drivers. It is possible to connect up to 10 driver in order to maintain a uniform effect for all fixtures. L.1500mm Quick connectin plug 1T2833 1T4196 Imax 4983 cd/klm 15 IMAX 3806 cd 3897 cd Imax 2999 cd/klm 26 IMAX 2291 cd 2345 cd TS ,2W KELVIN 3000K 4000K TS ,2W KELVIN 3000K 4000K Emergency kit Emergency + battery pack 3H 1T lm 1552 lm 1124 lm 1158 lm lm 1552 lm 1187 lm 1223 lm Imax 2690 cd/klm 30 EFFICACY 69 lm/w 71 lm/w IMAX 3025 cd 3114 cd Imax 3589 cd/klm 22 EFFICACY 73 lm/w 75 lm/w IMAX 4261 cd 4388 cd The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site RECESSED PROJECTORS RECESSED PROJECTORS 127

66 MINIARC KRIPTON FIXED Fixed recessed professional projector. Finned dissipation body in die-cast aluminium. Plaster bezel to be installed into gypsum-board ceiling. Optic system consisting of lower reflector in shiny metallized polycarbonate, anti-glare upper reflector in aluminium with opaque finish, main facetted optic in pure aluminium with maximum luminance and textured glass for light mixing. Side exit on the power cord with quick-connect system for connecting to the electric outlet. Quick connector for mounting to the ceiling. Remote electronic driver available as an accessory. ADJUSTABLE Adjustable recessed professional projector. Finned dissipation body in die-cast aluminium. Plaster bezel to be installed into gypsum-board ceiling. Optic system consisting of lower reflector in shiny metallized polycarbonate, anti-glare upper reflector in aluminium with opaque finish, main facetted optic in pure aluminium with maximum luminance and textured glass for light mixing. Optic group 359 adjustable on horizontal plan and 30 on the vertical one with mechanical locking system. Side exit on the power cord with quick-connect system for connecting to the electric outlet. Quick connector for mounting to the ceiling. Remote electronic driver available as an accessory. IP43 IP23 0,6 o SUPPLY OPTIC COLOUR CODE 0,6 o SUPPLY OPTIC COLOUR CODE 9W electronic 250mA FL 3000K TS 677 1T3050 9W electronic 250mA SP 3000K TS 676 1T3054 h 9W electronic 250mA FL 4000K TS 677 1T3051 h 9W electronic 250mA FL 3000K TS 677 1T mm W electronic 400mA FL 3000K TS W electronic 400mA FL 4000K TS 678 1T3052 1T mm 179 9W electronic 250mA SP 4000K TS 676 9W electronic 250mA FL 4000K TS 677 1T3056 1T mm Ø 225mm 115mm Ø 225mm 14W electronic 400mA SP 3000K TS 679 1T mm 210mm * versions 14W h min= 50mm PLASTER CODE * versions 14W h min= 50mm 1V7614 Available until June W electronic 400mA FL 3000K TS W electronic 400mA SP 4000K TS W electronic 400mA FL 4000K TS 678 1T3059 1T3060 1T3061 PLASTER Available until June 2015 CODE 1V7614 The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site REMOTE SUPPLY 250mA 400mA Power Supply Kit V AC 50/60Hz 1T4214 1T4215 TS ,5W KELVIN 3000K 4000K TS ,5W KELVIN 3000K 4000K 67 Pre-wired with a quick connection plug. DALI dimmable. Power Supply Kit V AC 50/60Hz 1T3975 1T lm 909 lm 764 lm 782 lm lm 909 lm 764 lm 782 lm Pre-wired with a quick connection plug. No dimmable TS 678 Imax 4983 cd/klm 15 EFFICACY 66 lm/w 68 lm/w IMAX 3806 cd 3897 cd 16,2W TS 679 Imax 2999 cd/klm 26 EFFICACY 66 lm/w 68 lm/w IMAX 2291 cd 2345 cd 16,2W Accessories Synchronization cable Synchronizes the dimming between 2 drivers. It is possible to connect up to 10 driver in order to maintain a uniform effect for all fixtures. L.1500mm CODE 1T KELVIN 3000K 4000K 1507 lm 1552 lm 1124 lm 1158 lm EFFICACY 69 lm/w 71 lm/w KELVIN 3000K 4000K 1507 lm 1552 lm 1187 lm 1223 lm EFFICACY 73 lm/w 75 lm/w Quick connectin plug Emergency kit 1T4196 Imax 2690 cd/klm 30 IMAX 3025 cd 3114 cd Imax 3589 cd/klm 22 IMAX 4261 cd 4388 cd Emergency + battery pack 3H 1T RECESSED PROJECTORS RECESSED PROJECTORS 129

67 MINIARC FIXED Fixed recessed low luminance projector for halogen and metal halide lamps. The projector consists of die cast white painted aluminium decorative ring, zinc-coated steel sheet brackets with louvered die cast aluminium heat sink, side feeding cable with rapid connection system. Optic system consisting of a higher anti-glare reflector in anodized aluminium, polished metallized polycarbonate lower reflector. Main reflector facetted in polished anodized aluminium for discharge versions. Ryton holder ring for glass. Extra-clear safety glass. Rapid lock mounting system for false-ceiling installation. Remote electronic power supply available as an accessory. ADJUSTABLE Adjustable recessed low luminance projector for halogen and metal halide lamps. The projector consists of die cast white painted aluminium decorative ring, zinc-coated steel sheet brackets with louvered die cast aluminium heat sink, side feeding cable with rapid connection system. Optic system consisting of a higher anti-glare reflector in anodized aluminium, polished metallized polycarbonate lower reflector. Main reflector facetted in polished anodized aluminium for discharge versions. Ryton holder ring for glass. Extra-clear safety glass. Optic group 359 adjustable on the horizontal plan and 30 on the vertical one with mechanical locking system. Rapid lock mounting system for false-ceiling installation. Remote electronic power supply available as an accessory. IP43 0,5 o HIT-Tc-CE OPTIC CODE 0,6 IP23 o HIT-Tc-CE OPTIC CODE G8.5 20/35/50/70W FL TS 525 1T2312 G8.5 20/35/50/70W SP TS 517 1T2314 >50mm Complete with safety glass. >50mm 20/35/50/70W FL TS 518 1T mm mm /35/50/70W WFL TS 519 1T2316 Complete with safety glass. Ø 114 Ø 105 mm Ø 114 Ø 105 mm IP23 0,3 o QR-CB 51 CODE 0,3 IP23 o QR-CB 51 CODE GU5.3 max 50W 12V 1T2431 GU5.3 max 50W 12V 1T2317 >50mm >50mm 50mm mm 112 Ø 114 Ø 105 mm Ø 114 Ø 105 mm REMOTE SUPPLY LxPxH CODE H P L Electronic transformer V/12V AC 50-60Hz dimmable TRIAC + IGBT 20-60W 94x20x31 mm W 140x31x67 mm 1T0240 Electronic power supply V 50-60Hz 35W 150x35x80 mm 1T W 150x35x80 mm 1T0501 Accessories See page RECESSED PROJECTORS RECESSED PROJECTORS 131

68 MINIARC TRIMLESS FIXED Fixed trimless recessed low luminance projector for plasterboard false ceilings for halogen, metal halide lamps and s. Anodized aluminium fixture body with patented mounting system using a white varnished pressure die-cast aluminium template for false ceiling installation. Die cast aluminium heat sink with upper and lower louvering, side feeding cable with rapid connection system. Optic system consisting of a higher anti-glare reflector in anodized aluminium, polished metallized polycarbonate lower reflector. Main reflector facetted in polished anodized aluminium for discharge and versions. Ryton holder ring for glass. Extra-clear safety glass. Remote electronic power supply available as an accessory. ADJUSTABLE Adjustable trimless recessed low luminance projector for plasterboard false ceilings for halogen, metal halide lamps and s. Anodized aluminium fixture body with patented mounting system using a white varnished pressure die-cast aluminium template for false ceiling installation. Die cast aluminium heat sink with upper and lower louvering, side feeding cable with rapid connection system. Optic system consisting of a higher anti-glare reflector in anodized aluminium, polished metallized polycarbonate lower reflector. Main reflector facetted in polished anodized aluminium for discharge and versions. Ryton holder ring for glass. Extra-clear safety glass. Optic group 359 adjustable on the horizontal plan and 30 on the vertical one with mechanical locking system. Remote electronic power supply available as an accessory. IP43 0,5 o HIT-Tc-CE OPTIC CODE 0,6 IP23 o HIT-Tc-CE OPTIC CODE G8.5 20/35/50/70W FL TS 525 1T2468 G8.5 20/35/50/70W SP TS 517 1T2472 >50mm Complete with safety glass. >50mm 20/35/50/70W FL TS 518 1T mm 150,7 50mm /35/50/70W WFL TS 519 1T2474 Complete with safety glass. Ø 99 Ø 100 mm Ø 99 Ø 100 mm Ø 149 Ø 149 IP23 0,3 o QR-CB 51 CODE 0,3 IP23 o QR-CB 51 CODE GU5.3 max 50W 12V 1T2469 GU5.3 max 50W 12V 1T mm mm 112 Ø 99 Ø 100 mm Ø 99 Ø 100 mm Ø 149 Ø 149 REMOTE SUPPLY LxPxH CODE H P L Electronic transformer V/12V AC 50-60Hz dimmable TRIAC + IGBT 20-60W 94x20x31 mm W 140x31x67 mm 1T0240 Electronic power supply V 50-60Hz 35W 150x35x80 mm 1T W 150x35x80 mm 1T0501 Accessories See page RECESSED PROJECTORS RECESSED PROJECTORS 133

69 MINIARC KRIPTON FIXED Fixed recessed low luminance projector for plasterboard false ceilings for halogen and metal halide lamps. Die cast aluminium heat sink with upper and lower louvering, side feeding cable with rapid connection system. To be completed with plaster bezel, to be installed into gypsum-board ceiling, on which the fixture is to be fixed through springs. Optic system consisting of a higher anti-glare reflector in anodized aluminium, polished metallized polycarbonate lower reflector. Main reflector facetted in polished anodized aluminium. Ryton holder ring for glass. Extra-clear safety glass. Remote electronic power supply available as an accessory. ADJUSTABLE Adjustable recessed low luminance projector for plasterboard false ceilings for halogen and metal halide lamps. Die cast aluminium heat sink with upper and lower louvering, side feeding cable with rapid connection system. To be completed with plaster bezel, to be installed into gypsum-board ceiling, on which the fixture is to be fixed through springs. Optic system consisting of a higher anti-glare reflector in anodized aluminium, polished metallized polycarbonate lower reflector. Main reflector facetted in polished anodized aluminium. Ryton holder ring for glass. Extra-clear safety glass. Optic group 359 adjustable on the horizontal plan and 30 on the vertical one with mechanical locking system. Remote electronic power supply available as an accessory. IP43 IP23 1,8 o HIT-Tc-CE OPTIC CODE PLASTER CODE 1,8 o HIT-Tc-CE OPTIC CODE PLASTER CODE G8.5 20/35/50/70W FL TS 525 1T2312 1V7614 G8.5 20/35/50/70W SP TS 517 1T2314 1V7614 >50mm Complete with safety glass. >50mm 20/35/50/70W FL TS 518 1T mm mm /35/50/70W WFL TS 519 1T2316 Complete with safety glass. Ø 107 Ø 210 Ø 225 mm Ø 107 Ø 210 Ø 225 mm IP23 IP23 1,5 o QR-CB 51 CODE PLASTER CODE 1,5 o QR-CB 51 CODE PLASTER CODE GU5.3 max 50W 12V 1T2431 1V7614 GU5.3 max 50W 12V 1T2317 1V mm mm 159 Ø 107 Ø 225 mm Ø 107 Ø 225 mm Ø 210 Ø 210 REMOTE SUPPLY LxPxH CODE H P L Electronic transformer V/12V AC 50-60Hz dimmable TRIAC + IGBT 20-60W 94x20x31 mm W 140x31x67 mm 1T0240 Electronic power supply V 50-60Hz 35W 150x35x80 mm 1T W 150x35x80 mm 1T0501 Accessories See page RECESSED PROJECTORS RECESSED PROJECTORS 135

70 MINIARC WALL WASHER Wall washer fixed recessed projector for metal halide lamps. The projector consists of die cast white painted aluminium decorative ring, zinc-coated steel sheet brackets with louvered die cast aluminium heat sink, side feeding cable with rapid connection system. Optic system consisting of main polished anodized aluminium facetted spot optic, anodized polished aluminium anti-glare higher reflector and polished metallized polycarbonate lower reflector. Extra clear safety glass with glass ribbed lens for wall washer effect. Ryton holder ring for glass. Rapid lock mounting system for false-ceiling installation. Remote electronic ballast available as an accessory. 0,6 IP43 o HIT-Tc-CE OPTIC CODE G8.5 20/35/50/70W WW TS 524 1T2313 >50mm Complete with safety glass. 50mm 164 Ø 114 Ø 105 mm REMOTE SUPPLY LxPxH CODE H P L Electronic transformer V/12V AC 50-60Hz dimmable TRIAC + IGBT 20-60W 94x20x31 mm W 140x31x67 mm 1T0240 Electronic power supply V 50-60Hz 35W 150x35x80 mm 1T W 150x35x80 mm 1T0501 Lausanne, Switzerland Lighting design: Carré Mambo - François Dufour Lighiting consultant : Roldy Cueto 136 RECESSED PROJECTORS RECESSED PROJECTORS 137

71 MINIARC TRIMLESS MINIARC KRIPTON WALL WASHER Asymmetric trimless recessed projector for metal halide lamps. Anodized aluminium fixture body with patented mounting system using a white varnished pressure die-cast aluminium template for false ceiling installation. Die cast aluminium heat sink with upper and lower louvering. Side feeding cable with rapid connection system. Optic system consisting of main polished anodized aluminium facetted spot optic, anodized polished aluminium anti-glare higher reflector and polished metallized polycarbonate lower reflector. Extra clear safety glass with glass ribbed lens for wall washer effect. Ryton holder ring for glass. Remote electronic ballast available as an accessory. WALL WASHER Asymmetric recessed projector for plasterboard false ceilings for metal halide lamps. Die cast aluminium heat sink with upper and lower louvering, side feeding cable with rapid connection system. To be completed with plaster bezel to be installed into gypsumboard ceiling on which the fixture is to be fixed through springs. Optic system consisting of main polished anodized aluminium facetted spot optic, anodized polished aluminium anti-glare higher reflector and polished metallized polycarbonate lower reflector. Extra clear safety glass with glass ribbed lens for wall washer effect. Ryton holder ring for glass. Remote electronic ballast available as an accessory. 0,6 IP43 o HIT-Tc-CE OPTIC CODE 1,8 IP43 o HIT-Tc-CE OPTIC CODE PLASTER CODE G8.5 20/35/50/70W WW TS 524 1T2480 G8.5 20/35/50/70W WW TS 524 1T2313 1V7614 >50mm Complete with safety glass. >50mm Complete with safety glass. 50mm mm 211 Ø 99 Ø 100 mm Ø 149 Ø 107 Ø 225 mm Ø 210 REMOTE SUPPLY LxPxH CODE REMOTE SUPPLY LxPxH CODE H P L Electronic transformer V/12V AC 50-60Hz dimmable TRIAC + IGBT 20-60W 94x20x31 mm H P L Electronic transformer V/12V AC 50-60Hz dimmable TRIAC + IGBT 20-60W 94x20x31 mm W 140x31x67 mm 1T W 140x31x67 mm 1T0240 Electronic power supply V 50-60Hz 35W 150x35x80 mm 1T0500 Electronic power supply V 50-60Hz 35W 150x35x80 mm 1T W 150x35x80 mm 1T W 150x35x80 mm 1T RECESSED PROJECTORS RECESSED PROJECTORS 139

72 ARC 50 Recessed low luminance fixed downlight projector for halogen dichroic lamps. Anti-glare aluminium reflector. PPS ring allowing the substitution of the lamp without removing the fixture from the false ceiling. Polished aluminium external ring. Rapid lock mounting system for false-ceiling installation. 0,1 IP23 o QR-CB 51 CODE GU5.3 max 50W 12V mm 122 Ø 100 Ø 95 mm REMOTE SUPPLY LxPxH CODE H P L Electronic transformer V/12V AC 50-60Hz dimmable TRIAC + IGBT 20-60W 94x20x31 mm Accessories See page 144 Lausanne, Switzerland Lighting design: Carré Mambo - François Dufour Lighiting consultant : Roldy Cueto 140 RECESSED PROJECTORS RECESSED PROJECTORS 141

73 ARC 50 TRIMLESS ARC 50 KRIPTON FIXED Trimless recessed low luminance projector for halogen dichroic lamps. Installation counter-ring made of die-cast aluminium and fully recessed into the false ceiling. Ryton ring for rapid lamp mounting. Antiglare reflector made of polished and treated aluminium. Electronic transformer available as an accessory. FIXED Recessed low luminance fixed downlight projector for plasterboard false ceilings for halogen dichroic lamps. Anti-glare polished aluminium reflector. PPS ring allowing the substitution of the lamp without removing the fixture from the false ceiling. To be completed with plaster bezel to be installed into gypsum-board ceiling. Remote electronic ballast available as an accessory. 0,1 IP23 o QR-CB 51 CODE 1,4 IP23 o QR-CB 51 CODE PLASTER CODE GU5.3 max 50W 12V 1T1191 GU5.3 max 50W 12V V mm 123 Ø 93 Ø 94mm 75mm 162 Ø 152 Ø 102 Ø 225 mm Ø 210 REMOTE SUPPLY LxPxH CODE REMOTE SUPPLY LxPxH CODE H P L Electronic transformer V/12V AC 50-60Hz dimmable TRIAC + IGBT 20-60W 94x20x31 mm W 118x21x35 mm H P L Electronic transformer V/12V AC 50-60Hz dimmable TRIAC + IGBT 20-60W 94x20x31 mm W 118x21x35 mm Accessories See page 144 Accessories See page RECESSED PROJECTORS RECESSED PROJECTORS 143

74 ARC AND MINIARC ACCESSORIES ARC MINIARC / ARC 50 FIXED HIT-CE FIXED QR111 ADJUSTABLE HIT-CE ADJUSTABLE QR111 WALL WASHER FIXED / ADJUSTABLE QR-CB 51 Chromatic filters Interference glass filters*. Diameter 106 mm. 1T2532 Red 1T2533 Green 1T2534 Blue 1T2535 Yellow 1T2536 Magenta Red Green Blue Yellow Magenta 1T2532 Red 1T2533 Green 1T2534 Blue 1T2535 Yellow 1T2536 Magenta Red Green Blue Yellow Magenta only for ARC Red Green Blue Yellow Magenta Corrective filters Interference glass filters to modify the colour temperature of the light*. Diameter 106 mm. 1T2538 Sun 1T2539 Sunset 1T2540 Polar 1T2538 Sun 1T2539 Sunset 1T2540 Polar UV Stop filter Interference glass filter to reduce considerably the UV/B rays and to block (>90%) the UV/A* rays. Diameter 106mm. 1T T only for ARC Blade filter Parallel ribbed glass filter to ovalize the light beam; more evident when combined with spot optics. Diameter 106mm. only for MINIARC 1T2432 Safety glass Diameter 106 mm. included included The use of any accessory filter, in the discharge versions, substitutes the safety glass leaving the degree of protection unaltered. * Curved prismatic glass for fixed and adjustable versions for HIT-CE lamps.

75 CLOUD Recessed extractable projector TWO DIMENSIONS, MULTIPLE BENEFITS The CLOUD range today has different solutions in terms of size, lumen packages, colour temperature and beam angles to cover a wide range of installations. From low power solutions with just 11W in the MINI version, to high power, high performance solutions 45W in the standard version. MAXIMUM ORIENTATION The main feature of an extractable projector is maximum orientation allowing for any object to be illuminated from the ceiling. CLOUD may be oriented on the horizontal plan up to 355, whereas on the vertical plan aiming is achieved through friction and can be internally retract by 25 and extracted by 75. Precision illumination with CLOUD is easy! Innocean Design Agency - Frankfurt, Germany. Project: Ippolito Fleiz Group. Photographer: Robert Hoernig THE NEW GENERATION EXTRACTABLE PROJECTOR The unique design is the distinguishing trait of CLOUD. A single piece, where only the optic s enclosure is visible, while the more voluminous heat sink remains hidden into the ceiling even when the body is fully extracted, minimizing its presence. A beautiful creation by Targetti s design department, who has masterfully brought together aesthetics, discretion and functionality Curves alternate with squared edges creating a harmonious blend in which no detail is left to chance. A truly innovative design that both surprises and captivates. Two size, seven different power outputs with as many performances and four beam angles. 146 RECESSED PROJECTORS RECESSED PROJECTORS 147

76 CLOUD DETAILS WITH STYLE Nothing in CLOUD is left to chance. When completely extracted, part of its body is aligned to the false ceiling totally sealing the opening, when slightly retracted, a black ryton kicker hides any escaping light coming from within the false ceiling. Aesthetics, discretion and performance are perfectly united in CLOUD. PASSIVE DISSIPATION The thermal design has been an integral part of the development of the entire fixture and particularly of the heat sink. Thanks to its unique geometry and wide exposed surface, CLOUD is able to properly dissipate the considerable heat generated by a 5000lm source. As with all the Targetti fixtures, CLOUD also works well below the levels indicated by the manufacturers, thus guaranteeing long term performance. TWO DIFFERENT OPTICAL SYSTEM, MULTIPLE EFFECTS TCLOUD is fitted with aluminium micro optics that ensure high performance (up to 90 lm/w), and wide, soft beams, or the innovative Proprietary PMMA lenses that were designed and produced directly by Targetti, which guarantees quality and reliability and makes it possible to obtain highly defined beams. EXTENSIVE CHOICE OF SUPPLIES Extensive choice of drivers: electronic, dimmable 1/10V, dimmable DALI, and all with emergency devices are available. Connection to the power supply is simple; the power cable is connected to the heat sink to avoid it winding around the fixture during aiming procedures. A quick connection plug allows a tool-free connection to the desired driver. Instant installation that lasts a lifetime. Spot Flood Medium wide flood Wide flood 148 RECESSED PROJECTORS RECESSED PROJECTORS 149

77 CLOUD Recessed extractable projector. Extractible head and remote heat sink in die-cast aluminium painted in plaster white or deep black finish, with rotation system by friction on hinges. Removable front ring made of diecast aluminium painted in plaster white or deep black finish for the insertion of dedicated optical accessories. Installation frame made of die-cast aluminium painted in plaster white or deep black finish. Warm white, Ra84 high emission ; Ra97 on request. Metallized polycarbonate precision optics specifically developed for sources, with convex facets, available in Spot, Flood, Medium wide flood and Wide flood versions. High reflectance Scratch Proof Formula treatment. May be manually aimed from -25 to +75 in the vertical plane and 355 in the horizontal plane. Tool-free ultra-fast installation system for mounting into false ceilings measuring from 0.5 to 30 mm. Passive dissipation system. Pre-wired with 450 mm cable and plug for quick and secure connection to the driver. To be completed with a control gear kit, available in versions: basic electronic, 1/10V dimmable and DALI dimmable. Emeregency kit with 3h battery. 130mm 1,3 Ø 108 0,45m 400mm Ø Ø 162 mm OPTIC COLOUR FINISHES CURRENT CODE 21W 21W 21W 21W 37W 37W 37W 37W 37W 37W 37W 37W SP SP FL FL SP SP FL FL MWFL MWFL WFL WFL 4000K 4000K 4000K 4000K 4000K 4000K 4000K 4000K 4000K 4000K 4000K 4000K white black white black white black white black white black white black 600mA 600mA 600mA 600mA 1050mA 1050mA 1050mA 1050mA 1050mA 1050mA 1050mA 1050mA TS 753 TS 753 TS 754 TS 754 TS 755 TS 755 TS 756 TS 756 TS 757 TS 757 TS 758 TS 758 1T4112 1T4114 1T4113 1T4115 1T4116 1T4120 1T4117 1T4121 1T4118 1T4122 1T4119 1T W FL 4000K white 900mA TS 759 1T W FL 4000K black 900mA TS 759 1T W MWFL 4000K white 900mA TS 760 1T W MWFL 4000K black 900mA TS 760 1T4128 1,3 0,45m OPTIC COLOUR FINISHES CURRENT CODE 45W WFL 4000K white 900mA TS 761 1T mm 21W SP 3000K white 600mA TS 753 1T W WFL 4000K black 900mA TS 761 1T W SP 3000K black 600mA TS 753 1T mm Ø 108 Ø Ø 162 mm 21W FL 3000K white 600mA TS W FL 3000K black 600mA TS W SP 3000K white 1050mA TS W SP 3000K black 1050mA TS W FL 3000K white 1050mA TS 756 1T3608 1T3617 1T3609 1T3618 1T3610 SUPPLY 600mA 900mA 1050mA Electronic V Electronic 1/10V + touch dimm V DALI dimmable electronic V 1T3625 1T2966 1T3781 1T3626 1T2967 1T3782 1T3627 1T2968 1T W FL 3000K black 1050mA TS 756 1T W MWFL 3000K white 1050mA TS 757 1T W MWFL 3000K black 1050mA TS 757 1T3620 Emergency kit CODE 37W WFL 3000K white 1050mA TS 758 1T3612 Emergency + battery pack 3h 1T W WFL 3000K black 1050mA TS 758 1T W FL 3000K white 900mA TS 759 1T3613 Synchronization cable CODE 45W FL 3000K black 900mA TS W MWFL 3000K white 900mA TS 760 1T3622 1T3614 Synchronizes the dimming between 2 drivers. It is possible to connect up to 10 driver in order to maintain a uniform effect for all fixtures. 1T W MWFL 3000K black 900mA TS 760 1T W WFL 3000K white 900mA TS 761 1T W WFL 3000K black 900mA TS 761 1T3624 Accessories See page RECESSED PROJECTORS RECESSED PROJECTORS 151

78 CLOUD MINI Optic with methacrylate lens 0,7 IP23 o OPTIC COLOR FINISHES SUPPLY COD. Led recessed extractable projector. Head, front ring and heat sink in die-cast aluminium painted in plaster white or deep black finish. Extractable optic group and integrated dissipator with rotation system by friction on hinges. Warm white and neutral white Ra84 high emission ; Ra97 on request. Dedicated optic groups equipped with proprietary methacrylate lens or precision optics with convex facets made of superpure aluminium available in Spot, Flood, Medium wide flood and Wide flood versions. May be manually aimed from -20 to +75 in the vertical plane and 355 in the horizontal plane. Removable front ring for the insertion of dedicated optical accessories. Tool-free ultra-fast installation system for mounting into false ceilings measuring from 0.5 to 25mm. Passive dissipation system. Electronic or DALI driver included ,5 min 250 Ø min 100 Ø 125 mm 11W SP 3000K white electronic TS W SP 3000K black electronic TS W SP 4000K white electronic TS W SP 4000K black electronic TS W SP 3000K white DALI TS W SP 3000K black DALI TS W SP 4000K white DALI TS W SP 4000K black DALI TS W FL 3000K white electronic TS 845 1T4216 1T4217 1T4228 1T4229 1T4343 1T4344 1T4355 1T4356 1T W FL 3000K black electronic TS 845 1T W FL 4000K white electronic TS 845 1T4230 Optic with convex facets 12W FL 4000K black electronic TS 845 1T4231 0,7 IP23 o OPTIC COLOR FINISHES SUPPLY COD. 12W FL 3000K white DALI TS 845 1T W MWFL 3000K white electronic TS 846 1T W FL 3000K black DALI TS 845 1T W MWFL 3000K black electronic TS 846 1T W FL 4000K white DALI TS 845 1T W MWFL 4000K white electronic TS 846 1T W FL 4000K black DALI TS 845 1T W MWFL 4000K black electronic TS 846 1T W MWFL 3000K white DALI TS 846 1T W SP 3000K white electronic TS 847 1T W MWFL 3000K black DALI TS 846 1T W SP 3000K black electronic TS 847 1T W MWFL 4000K white DALI TS 846 1T W SP 4000K white electronic TS 847 1T4234 min 250 Ø W MWFL 4000K black DALI TS 846 1T W SP 4000K black electronic TS W SP 3000K white DALI TS 847 1T4235 1T min W MWFL 3000K white electronic TS 848 1T W SP 3000K black DALI TS 847 1T ,5 75 Ø 125 mm 17W MWFL 3000K black electronic TS W MWFL 4000K white electronic TS W MWFL 4000K black electronic TS 848 1T4225 1T4236 1T W SP 4000K white DALI TS W SP 4000K black DALI TS 847 1T4361 1T W MWFL 3000K white DALI TS 848 1T W MWFL 3000K black DALI TS W MWFL 4000K white DALI TS 848 1T4352 1T4363 TS ,6W KELVIN 3000K 4000K TS ,1W KELVIN 3000K 4000K TS ,1W KELVIN 3000K 4000K 17W MWFL 4000K black DALI TS 848 1T lm 1241 lm 889 lm 928 lm lm 1542 lm 1057 lm 1104 lm lm 1542 lm 1222 lm 1276 lm 17W WFL 3000K white electronic TS W WFL 3000K black electronic TS 849 1T4226 1T4227 Imax 9470 cd/klm 15 EFFICACY 70 lm/w 73 lm/w IMAX cd cd Imax 2624 cd/klm 30 EFFICACY 75 lm/w 78 lm/w IMAX 3875 cd 4046 cd Imax 1372 cd/klm 48 EFFICACY 87 lm/w 90 lm/w IMAX 2026 cd 2115 cd 17W WFL 4000K white electronic TS W WFL 4000K black electronic TS W WFL 3000K white DALI TS W WFL 3000K black DALI TS W WFL 4000K white DALI TS 849 1T4238 1T4239 1T4353 1T4354 1T4365 TS ,2W KELVIN 3000K 4000K 1936 lm 2021 lm 1420 lm 1482 lm EFFICACY 67 lm/w 70 lm/w TS ,1W KELVIN 3000K 4000K 2120 lm 2213 lm 1675 lm 1749 lm EFFICACY 83 lm/w 87 lm/w TS ,1W KELVIN 3000K 4000K 2120 lm 2213 lm 1701 lm 1775 lm EFFICACY 84 lm/w 88 lm/w 17W WFL 4000K black DALI TS 849 1T4366 Imax 5902 cd/klm 20 IMAX cd cd Imax 1368 cd/klm 46 IMAX 2901 cd 3028 cd Imax 927 cd/klm 60 IMAX 1965 cd 2052 cd 152 RECESSED PROJECTORS RECESSED PROJECTORS 153

79 CLOUD CLOUD ACCESSORIES TS W TS W TS ,3W OPTICAL ACCESSORIES (LARGE VERSION) CODE cd/1000lm α = Imax 6783 cd/klm KELVIN 3000K 4000K 2446 lm 2519 lm 2071 lm 2132 lm EFFICACY 86 lm/w 89 lm/w IMAX cd cd cd/1000lm α = Imax 2734 cd/klm KELVIN 3000K 4000K 2446 lm 2519 lm 2049 lm 2110 lm EFFICACY 85 lm/w 88 lm/w IMAX 6687 cd 6887 cd cd/1000lm α = Imax 6838 cd/klm KELVIN 3000K 4000K 3760 lm 3873 lm 3093 lm 3185 lm EFFICACY 73 lm/w 75 lm/w IMAX cd cd Chromatic filters Interference glass filters. To be completed with dedicated holder ring. Red Green Blue Yellow Magenta 1T1712 1T1713 1T1714 1T1715 1T1716 TS 756 cd/1000lm α = cd/klm 42,3W KELVIN 3000K 4000K 3760 lm 3873 lm 3032 lm 3123 lm EFFICACY 72 lm/w 74 lm/w IMAX 9929 cd cd TS 757 cd/1000lm α = Imax 1592 cd/klm 42,3W KELVIN 3000K 4000K 3760 lm 3873 lm 3087 lm 3180 lm EFFICACY 73 lm/w 75 lm/w IMAX 5985 cd 6165 cd TS 758 cd/1000lm α = Imax 1084 cd/klm 42,3W KELVIN 3000K 4000K 3760 lm 3873 lm 3041 lm 3132 lm EFFICACY 72 lm/w 74 lm/w IMAX 4076 cd 4198 cd Tone filters Interference glass filters to vary the colour temperature of light. To be completed with dedicated holder ring. Blade light filter Parallel ribbed glass filter. This makes the beam take on an oval shape and when combined with spotlights, the light blade appears more prominent. To be completed with dedicated holder ring. Gold Cold Peach 1T1786 1T1777 1T1759 1T1708 TS W KELVIN 3000K 4000K 4995 lm 5145 lm TS W KELVIN 3000K 4000K 4995 lm 5145 lm TS W KELVIN 3000K 4000K 4995 lm 5145 lm Diffusive filter Wired refractive glass filter. This softens the luminous effect. To be completed with dedicated holder ring. 1T lm 4257 lm 4245 lm 4373 lm 4174 lm 4300 lm cd/1000lm α = 35 Imax 2055 cd/klm EFFICACY 81 lm/w 83 lm/w IMAX cd cd cd/1000lm α = 47 Imax 1440 cd/klm EFFICACY 83 lm/w 86 lm/w IMAX 7192 cd 7408 cd cd/1000lm α = 59 Imax 1022 cd/klm EFFICACY 82 lm/w 84 lm/w IMAX 5105 cd 5258 cd Anti-glare grid Black lacquered metal honeycomb structure. To be completed with dedicated holder ring. 1T1711 Cut-off Tube Allows for the beam to be focused while removing the fall-off component. 1T3142 Zoom Allows for the beam to be manually focused and shaped into different dimensions through the use of a system of lenses, resulting in a very uniform and defined effect. 1T3432 Asymmetric screen Metal painted asymmetric screen, to be complited with holder ring, ideal for a wall wash effect. 1T3143 Holder ring Black painted aluminium holder ring for the accessories. 1T3727 The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site RECESSED PROJECTORS RECESSED PROJECTORS 155

80 NAUTUS design Daniel Bernard EXTRACTABLE RECESSED PROJECTOR FOR HALOGEN AND METAL HALIDE LAMPS MULTIPLE VERSIONS There are many versions available: large and small, for halogen and discharge lamps, with round and square finishing rings and with an original curved profile. DESIGN AND FUNCTIONALITY The original asymmetry of the shapes, the essentiality of the design and the attention to details makes of NAUTUS a fixture which is capable of integrating and characterising any environment. 156 RECESSED PROJECTORS RECESSED PROJECTORS 157

81 NAUTUS LARGE Extractable recessed projector for metal halide and halogen lamps. Die-cast aluminium outer ring. Extractable, die-cast aluminium optical body with a friction sliding system on a flexible, double bar and a finned heat heat sink. Can be adjusted 355 horizontally and 58 vertically. Discharge versions equipped with precision optics having a parabolic section presenting different profiles and finishes according to the beam angle. Spot and Flood lights, complete with anti-glare spill-ring. Rapid mounting electrical connection system. Complete with borosilicate safety glass. IP43 0,8 o HIT-CE OPTIC RING COLOUR CODE 0,8 IP43 o QR111 RING COLOUR CODE G12 35/50/70/100/150W SP round aluminium TS 488 1T1290 G53 max 100W 12V round aluminium 1T mm /50/70/100/150W SP round black TS /50/70/100/150W SP round white TS 488 1T1291 1T mm 160 max 100W 12V round black max 100W 12V round white 1T1315 1T1316 Ø 160 mm 35/50/70/100/150W FL round aluminium TS 489 1T1293 Ø 160 mm max 100W 12V square aluminium 1T1317 Ø /50/70/100/150W FL round black TS /50/70/100/150W FL round white TS 489 1T1294 1T1295 Ø 170 max 100W 12V square black max 100W 12V square white 1T1318 1T /50/70/100/150W WFL round aluminium TS 490 1T /50/70/100/150W WFL round black TS 490 1T1297 REMOTE SUPPLY LxPxH CODE 35/50/70/100/150W WFL round white TS 490 1T1298 P L 35W 214x79x79 mm /50/70/100/150W VWFL round aluminium TS 491 1T1299 H Magnetic power supply V 50/60 Hz 70W 214x79x79 mm /50/70/100/150W VWFL round black TS 491 1T W 214x79x79 mm /50/70/100/150W VWFL round white TS 491 1T W 150x35x80 mm 1T /50/70/100/150W SP square aluminium TS 488 1T1302 Electronic power supply V 50/60 Hz 70W 150x35x80 mm 1T /50/70/100/150W SP square black TS 488 1T W 185x33x96 mm 1T /50/70/100/150W SP square white TS 488 1T W 210x35x80 mm 1T /50/70/100/150W FL square aluminium TS /50/70/100/150W FL square black TS 489 1T1305 1T1306 Electronic transformer /12V AC 50/60 Hz dimmable TRIAC + IGBT W 118x21x35 mm /50/70/100/150W FL square white TS 489 1T /50/70/100/150W WFL square aluminium TS 490 1T /50/70/100/150W WFL square black TS /50/70/100/150W WFL square white TS 490 1T1309 1T1310 Accessories See page /50/70/100/150W VWFL square aluminium TS 491 1T /50/70/100/150W VWFL square black TS 491 1T1312 Ø Ø Ø Ø 35/50/70/100/150W VWFL square white TS 491 1T RECESSED PROJECTORS RECESSED PROJECTORS 159

82 NAUTUS SMALL Extractable and compact recessed projector for metal halide and halogen lamps. Die-cast aluminium outer ring. Extractable, die-cast aluminium optical body with a friction sliding system on a flexible, double bar and a finned heat heat sink. Can be adjusted 355 horizontally and 58 vertically. Discharge versions equipped with precision optics having a parabolic section presenting different profiles and finishes according to the beam angle. Spot and Flood lights, complete with anti-glare spill-ring. Rapid mounting electrical connection system. Complete with borosilicate safety glass. 0,2 IP43 o HIT-Tc-CE OPTIC RING COLOUR CODE 0,2 IP43 o QR-CB 51 RING COLOUR CODE G8.5 35/50/70W SP round aluminium TS 492 1T1320 GU5.3 max 50W 12V round aluminium 1T mm /50/70W SP round black TS 492 1T1321 max 50W 12V round black 1T /50/70W SP round white TS 492 1T1322 max 50W 12V round white 1T1340 Ø 125 mm 35/50/70W FL round aluminium TS 493 1T1323 max 50W 12V square aluminium 1T1341 Ø /50/70W FL round black TS 493 1T1324 max 50W 12V square black 1T /50/70W FL round white TS 493 1T1325 max 50W 12V square white 1T /50/70W WFL round aluminium TS 494 1T /50/70W WFL round black TS 494 1T1327 REMOTE SUPPLY LxPxH CODE 35/50/70W WFL round white TS /50/70W SP square aluminium TS 492 1T1328 1T1329 H P L Electronic power supply V 50/60 Hz 35W 70W 150x35x80 mm 150x35x80 mm 1T0500 1T /50/70W SP square black TS /50/70W SP square white TS 492 1T1330 1T1331 Electronic transformer /12V AC 50/60 Hz dimmable TRIAC + IGBT 20-60W 94x20x31 mm W 118x21x35 mm /50/70W FL square aluminium TS 493 1T /50/70W FL square black TS 493 1T /50/70W FL square white TS /50/70W WFL square aluminium TS 494 1T1334 1T1335 Accessories See page /50/70W WFL square black TS 494 1T /50/70W WFL square white TS 494 1T1337 Ø Ø Ø 160 RECESSED PROJECTORS RECESSED PROJECTORS 161

83 NAUTUS ACCESSORIES OPTICAL ACCESSORIES for NAUTUS HIT-CE OPTICAL ACCESSORIES for NAUTUS HIT-Tc-CE Red 1T1700 Red 1T1712 Green 1T1701 Green 1T1713 Chromatic filters Interference flat glass filters. Diameter 101mm. Blue 1T1702 Chromatic filters Interference flat glass filters. Diameter 70mm. Blue 1T1714 Yellow 1T1703 Yellow 1T1715 Magenta 1T1704 Magenta 1T1716 Corrective filters Interference flat glass filters to vary the colour temperature of light. Diameter 101 mm. Sun Sunset Polar 1T1705 1T1706 1T1707 Corrective filters Interference flat glass filters to vary the colour temperature of the light. Diameter 70 mm. Sun Sunset Polar 1T1717 1T1718 1T1719 Blade light filter Striped refractive glass filter. This makes the beam take on an oval shape and when combined with spotlights, the light blade appears more prominent. Diameter 101 mm. 1T1696 Light blade filter Parallel ribbed glass filter. This makes the beam take on an oval shape and when combined with spotlights, the light blade appears more prominent. Diameter 70 mm. 1T1708 Diffusive filter Parallel ribbed glass filter. This softens the luminous effect. Diameter 101 mm. 1T1697 Diffusive filter Wired refractive flat glass filters. This softens the luminous effect. Diameter 70 mm. 1T1709 Anti-glare grid Honey comb structure made of metal painted black. Diameter 101 mm. Max 70W in the HIT-CE version. 1T1699 Anti-glare grid Honey comb structure made of metal painted black. Diameter 70 mm. Max HIT-Tc-CE 35W. 1T1711 UV Stop filter Interference flat glass filters to reduce the UV/B rays and block (>90%) the UV/A rays. Diameter 101 mm. 1T1698 UV Stop filter Interference flat glass filters to reduce the UV/B rays and block (>90%) the UV/A rays. Diameter 70 mm. 1T RECESSED PROJECTORS RECESSED PROJECTORS 163

84 MAGMA GIMBAL RECESSED AND EXTRACTABLE PROJECTOR FOR HALOGEN, METAL HALIDE AND SOURCES WIDE SELECTION, MAXIMUM MODULARITY Gimbal or extractable in order to best satisfy every design requirement. The Gimbal version is discreet and effective, with an adjustability of +/-30 by means of concentric rings. The extractable version is able to provide an adjustability of up to +/-70. In the MAGMA series, the fixture s body can be equipped with the power supply and optics which are most suited to the design requirements. In this way, the same composition can include different wattages and beam angles in order to create an endless number of light settings. Harmont & Blaine showroom - Rome WFL FL SP RECESSED PROJECTORS 165

85 MAGMA TYPE LAMP OPTIC SP FL MWFL WFL ROUND GIMBAL MORE AND MORE LIGHTS HIT-CE 35W 50W 70W 100W 150W 35W 50W 70W 100W 150W 35W 50W 70W 100W 150W 35W 50W 70W 100W 150W MAGMA has updated its versions and fitted them with an optical platform and a CCT Architectural source for improved precision and performance. Similar performance, sources and beam widths for products from different segments in order to meet different project needs consistently. 24W 37W 24W 37W 24W 37W SQUARE GIMBAL 1x HIT-CE 2x HIT-CE 3x HIT-CE 35W 50W 70W 100W 150W 35W 50W 70W 100W 150W 35W 50W 70W 100W 150W 35W 50W 70W 100W 150W ROUND EXTRACTABLE COORDINATED PROFESSIONAL LIGHT MAGMA also has a projector version with the same power supply, optics and sources to meet different needs consistently. HIT-CE 35W 50W 70W 100W 150W 35W 50W 70W 100W 150W 35W 50W 70W 100W 150W 35W 50W 70W 100W 150W SQUARE EXTRACTABLE 1x HIT-CE 2x HIT-CE 3x HIT-CE 35W 50W 70W 100W 150W 35W 50W 70W 100W 150W 35W 50W 70W 100W 150W 35W 50W 70W 100W 150W 166 RECESSED PROJECTORS RECESSED PROJECTORS 167

86 MAGMA GIMBAL recessed professional projector. Die-cast aluminium body and internal rings and aluminium external rings. Available in two-tone painted aluminium/ black or all white. Gimbal system on concentric rings makes it possible to adjust the optic unit +/-30 on any axis. High emission warm white or neutral white. Ra84; Ra 97 on request. Precision optics with convex facets in metallised polycarbonate available in Spot, Flood and Medium wide flood versions. Treated with a highly reflective Scratch Proof Formula. A large range of accessories and optic screens can be fitted to the fixture. o be completed with a control gear kit, available in versions: basic electronic, 1/10V dimmable and DALI dimmable. Emeregency kit with 3h battery. Power supply 700mA 1050mA Electronic V 1T2963 1T Electronic 1/10V + touch dimm V 1T2964 1T3782 DALI dimmable electronic V 1T2965 1T3783 Emergency kit CODE Inverter + Battery pack 3h 1T3144 Synchronization cable Synchronizes the dimming between 2 drivers. It is possible to connect up to 10 driver in order to maintain a uniform effect for all fixtures. CODE 1T2833 IP23 o OPTIC CURRENT FINISHES COLOR CODE 25W SP 700mA plaster white 3000K TS 631 1T4007 >160mm >160mm W SP 700mA plaster white 4000K TS W SP 700mA aluminium/black 3000K TS 631 1T4008 1T4009 Accessories See page 174 Ø 200 Ø 180 mm 25W SP 700mA aluminium/black 4000K TS W FL 700mA plaster white 3000K TS 632 1T4010 1T W FL 700mA plaster white 4000K TS 632 1T W FL 700mA aluminium/black 3000K TS 632 1T W FL 700mA aluminium/black 4000K TS 632 1T W MWFL 700mA plaster white 3000K TS 633 1T W MWFL 700mA plaster white 4000K TS 633 1T W MWFL 700mA aluminium/black 3000K TS 633 1T W MWFL 700mA aluminium/black 4000K TS 633 1T W SP 1050mA plaster white 3000K TS W SP 1050mA plaster white 4000K TS W SP 1050mA aluminium/black 3000K TS W SP 1050mA aluminium/black 4000K TS W FL 1050mA plaster white 3000K TS 632 1T4019 1T4020 1T4021 1T4022 1T4023 TS W KELVIN 3000K 4000K 2571 lm 2649 lm 2187 lm 2253 lm EFFICACY 75 lm/w 78 lm/w TS W KELVIN 3000K 4000K 2571 lm 2649 lm 2176 lm 2242 lm EFFICACY 75 lm/w 77 lm/w TS W KELVIN 3000K 4000K 2571 lm 2649 lm 2234 lm 2302 lm EFFICACY 77 lm/w 79 lm/w 38W FL 1050mA plaster white 4000K TS 632 1T4024 Imax 7810 cd/klm 14 IMAX cd cd Imax 2949 cd/klm 28 IMAX 7581 cd 7811 cd Imax 1655 cd/klm 45 IMAX 4254 cd 4383 cd 38W FL 1050mA aluminium/black 3000K TS W FL 1050mA aluminium/black 4000K TS W MWFL 1050mA plaster white 3000K TS W MWFL 1050mA plaster white 4000K TS W MWFL 1050mA aluminium/black 3000K TS 633 1T4025 1T4026 1T4027 1T4028 1T4029 TS ,5 W KELVIN 3000K 4000K 3382 lm 3483 lm 2876 lm 2962 lm EFFICACY 68 lm/w 70 lm/w TS ,5W KELVIN 3000K 4000K 3382 lm 3483 lm 2863 lm 2948 lm EFFICACY 67 lm/w 69 lm/w TS ,5W KELVIN 3000K 4000K 3382 lm 3483 lm 2939 lm 3027 lm EFFICACY 69 lm/w 71 lm/w 38W MWFL 1050mA aluminium/black 4000K TS 633 1T4030 Imax 7810 cd/klm 14 IMAX cd cd Imax 2949 cd/klm 28 IMAX 9972 cd cd Imax 1655 cd/klm 45 IMAX 5596 cd 5763 cd The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site RECESSED PROJECTORS RECESSED PROJECTORS 169

87 MAGMA HIT GIMBAL Adjustable recessed projector for metal halide lamps. Body and internal rings made of die-cast aluminium. Die-cast aluminium outer ring. Available bicolour aluminium-black or all white painted. Gimbal system on concentric rings for the optics to be adjusted +/-30 on either axis. Rapid mounting system for false ceiling installation. Rapid mounting electrical connection system. Complete with safety glass. IP23 o HIT-CE RING FINISHES WEIGHT CODE REMOTE SUPPLY LxPxH CODE G12 1x max 150W round white 1,0 Kg 1T3651 P L 35W 214x79x79 mm >75mm >75mm 129 1x max 150W round aluminium-black 1,0 Kg 1x max 150W square white 1,8 Kg 1T2204N 1T3652 H Magnetic power supply V 50/60 Hz 70W 150W 214x79x79 mm 214x79x79 mm Ø 200 Ø 180 mm 1x max 150W square aluminium-black 1,8 Kg 2x max 150W rectangular white 3,1 Kg 1T2206N 1T W 150x35x80 mm Electronic power supply V 50/60 Hz 70W 150x35x80 mm 1T0500 1T0501 2x max 150W rectangular aluminium-black 3,1 Kg 1T2207N 100W 185x33x96 mm 1T2531 3x max 150W rectangular white 4,5 Kg 1T W 210x35x80 mm 1T0502 3x max 150W rectangular aluminium-black 4,5 Kg 1T2208N The fitting must be completed with the necessary quantity of optics according to the typology chosen. OPTIC FINISHES CODE Accessories See page 174 SP white TS 585 SP aluminium-black TS 585 FL white TS 586 FL aluminium-black TS 586 MWFL white TS 587 MWFL aluminium-black TS 587 WFL white TS 588 WFL aluminium-black TS 588 1T2097N 1T2101N 1T2098N 1T2102N 1T2558N 1T2559N 1T2099N 1T2103N 170 RECESSED PROJECTORS RECESSED PROJECTORS 171

88 MAGMA EXTRACTABLE Extractable recessed projector for metal halide lamps. Die-cast aluminium body painted black. Outer ring made of die-cast aluminium painted black. Available bi-colour aluminium-black or all white painted. Extractable optics that can be adjusted +/-70 on either axis. Rapid mounting system to the false ceiling. Rapid mounting electrical connection system. Complete with safety glass. IP23 o HIT-CE RING FINISHES WEIGHT CODE REMOTE SUPPLY LxPxH CODE G12 1x max 150W round white 1,0 Kg 1T3647 P L 35W 214x79x79 mm x max 150W round aluminium-black 1,0 Kg 1T2205N H Magnetic power supply V 50/60 Hz 70W 214x79x79 mm >75mm 245 1x max 150W square white 1,8 Kg 1x max 150W square aluminium-black 1,8 Kg 1T3648 1T2209N 150W 35W 214x79x79 mm 150x35x80 mm T0500 Ø 200 Ø 180 mm 2x max 150W rectangular white 3,1 Kg 2x max 150W rectangular aluminium-black 3,1 Kg 1T3649 1T2210N Electronic power supply V 50/60 Hz 70W 150x35x80 mm 100W 185x33x96 mm 1T0501 1T2531 3x max 150W rectangular white 4,5 Kg 1T W 210x35x80 mm 1T0502 3x max 150W rectangular aluminium-black 4,5 Kg 1T2211N The fitting must be completed with the necessary quantity of optics according to the typology chosen. OPTIC FINISHES CODE Accessories See page 174 SP white TS 585 SP black TS 585 FL white TS 586 FL black TS 586 MWFL white TS 587 MWFL black TS 587 WFL white TS 588 WFL black TS 588 1T2097N 1T2101N 1T2098N 1T2102N 1T2558N 1T2559N 1T2099N 1T2103N 172 RECESSED PROJECTORS RECESSED PROJECTORS 173

89 MAGMA HIT-CE Chromatic and UV Stop filters Interference filters on flat glass. UV filter to reduce the UV/B rays and block (>90%) the UV/A rays. Diameter is 101 mm. To be completed with additional holder ring. 1T1700 1T1701 1T1702 1T1703 1T1704 1T1698 Red Green Blue Yellow Magenta UV Stop 1T1712 1T1713 1T1714 1T1715 1T1716 Red Green Blue Yellow Magenta Corrective filters Interference filters on flat glass to vary the colour temperature of the light. Diameter is 101 mm. To be completed with additional holder ring. 1T1705 Sun 1T1706 Sunset 1T1707 Polar 1T1786 Sun 1T1777 Sunset 1T1759 Polar Diffusive and Blade filter Refractive filter on flat glass. Wired diffusive filter to soften the luminous effect; ribbed blade filter to ovalize the beam. Diameter is 101 mm. To be completed with additional holder ring. 1T1697 1T1696 Diffusive Blade of light 1T1709 1T1708 Diffusive Blade of light Holder ring Painted aluminium ring to hold the accessories. 1T2109N 1T2110N White Black 1T3727 Anti-glare grid Honey comb structure made of black painted metal complete with holder ring and transparent protection glass. Diameter is 101 mm. Max 70W in the HIT-CE version. 1T2561N 1T2562N White Black 1T1711 Cut-off Tube Allows for the beam to be focused while removing the fall-off component. 1T3142 Zoom Allows for the beam to be manually focused and shaped into different dimensions through the use of a system of lenses, resulting in a very uniform and defined effect. 1T3432 Asymmetric screen Metal painted asymmetric screen, to be complited with holder ring, ideal for a wall wash effect. 1T3143 Harmont & Blaine store - Rome, Italy 174 RECESSED PROJECTORS RECESSED PROJECTORS 175

90 KR1 MULTI OPTIC RECESSED PROJECTOR FOR HALOGEN, METAL HALIDE AND SOURCES Carlo Pazolini Flagship Store - New York, USA. Project: Arch. G. Borruso FOR RETAIL OUTLETS The option of different configurations from one to four lamps, even of different types make KR1 the perfect fixture for the retail sector that requires products capable of integrating both aesthetics and functional flexibility. Each optical element can be easily adjusted by up to +/- 43 on one side and +/- 20 on the other side. The 3x version also allows mounting discharge, halogen or light sources at the same time for complete and precise effects. 176 RECESSED PROJECTORS RECESSED PROJECTORS 177

91 Kr1 Adjustable recessed projector for halogen, metal halide and sources. Black painted metal body. Metal frame in aluminium colours finish. Light emission depending on the beam width of the selected source. Optics +/- 43 adjustable on the long side and +/- 20 on the short one. Rapid mounting system to the false ceiling by means of pre-galvanised steel brackets. Remote power supply available as an accessory. MODULO 1X MODULO 2X IP23 1,8 o DR111 FINISHES CODE 3,0 IP23 o DR111 FINISHES CODE GU10 15W aluminium 1T3388 GU10 2x 15W aluminium 1T3397 B H2 H h Does not require accessory driver. Not dimmable. B H2 H h Does not require accessory driver. Not dimmable. A l A l A B H H2 l h HIT-CE OPTIC FINISHES CODE A B H H2 l h HIT-CE OPTIC FINISHES CODE DR111 G12 max 150W WFL aluminium VI 130 1V DR111 G12 2x max 70W WFL aluminium VI 130 1V HIT-CE HIT-CE QR QR QR-CB 51 MR QR-CB 51 MR16 IP23 1,1 o QR111 FINISHES CODE 3,0 IP23 o QR111 FINISHES CODE G53 max 100W aluminium 1V7164 G53 2x max 100W aluminium 1V7166 IP23 0,7 o QR-CB 51 MR16 FINISHES CODE 1,1 IP23 o QR-CB 51 MR16 FINISHES CODE GU5.3 max 50W / 5,5-7,5W aluminium 1V7160 GU5.3 max 2x 50W / 5,5-7,5W aluminium 1V7161 Version with MR16 lamp can be powered using an electronic transformer for halogen lamps. MR16 lamp 5,5W not dimmable, MR16 lamp 7,5W dimmable. Version with MR16 lamp can be powered using an electronic transformer for halogen lamps. MR16 lamp 5,5W not dimmable, MR16 lamp 7,5W dimmable. LAMPS DR111 OPTIC COLOUR CODE GU10 15W SP (24 ) 3000K MR16 15W FL (35 ) 3000K GU5.3 5,5W 12V FL (50 ) 3000K 7,5W 12V FL (38 ) 3000K For correct operation of KR1 version, we recommend use of the lamps and the accessory ballasts indicated in this catalogue. 0B335 0B336 0B330 0B331 Ø 178 RECESSED PROJECTORS RECESSED PROJECTORS 179

92 KRIPTON PLUS SINGLE MODULE Adjustable recessed fixture for plasterboard false ceilings for metal halide and halogen lamps. The fixture consists of a metal body and optic support with a black finish and square gypsum frame, which is to be plastered onto the plasterboard ceiling. The optics can be adjusted +/- 43 on one axis and +/- 20 on the other. Power supply available as an accessory. 4,3 IP23 o HIPAR30-CE CODE E27 max 70W 1V7250 H P h L l 4,0 IP23 o QR111 CODE G53 max 100W 12V 1V7247 H P h L l 4,0 IP23 o QR-CB 51 CODE GU5.3 max 50W 12V 1V7244 H P h L l L H P l h HIPAR QR111 QR-CB 51 Parque Arauco - Santiago, Chile. Project: arch. Paulina Sir, arch. Cristian Fernández REMOTE SUPPLY LxPxH CODE P L 35W 214x79x79 mm Magnetic power supply V 50/60 Hz H 70W 214x79x79 mm THE ESSENCE OF LIGHT Discreet and versatile, Kripton Plus adapts to every environment. Complete with its plaster frame, this unit is capable of becoming part of the architecture of any environment. The unit can employ up to three halogen or metal halide adjustable light sources to illuminate any space, while concealing its technological components. Electronic power supply V 50/60 Hz Electronic transformer /12V AC 50/60 Hz dimmable TRIAC + IGBT 35W 150x35x80 mm 70W 150x35x80 mm 20-60W 94x20x31 mm W 118x21x35 mm 1T0500 1T RECESSED PROJECTORS RECESSED PROJECTORS 181

93 kripton plus DOUBLE MODULE Adjustable recessed fixture for plasterboard false ceilings for metal halide and halogen lamps. The fixture consists of a metal body and optic support with a black finish and a rectangular gypsum frame, which is to be plastered onto the plasterboard ceiling. The optics can be adjusted +/- 43 on the long side and +/- 20 on the short side. Power supply available as an accessory. TRIPLE MODULE Adjustable recessed fixture for plasterboard false ceilings for metal halide and halogen lamps. The fixture consists of a metal body and optic support with a black finish and a rectangular gypsum frame, which is to be plastered onto the plasterboard ceiling. The optics can be adjusted +/- 43 on the long side and +/- 20 on the short side. Power supply available as an accessory. IP23 5,5 o HIPAR30-CE CODE 6,0 IP23 o HIPAR30-CE + 2x QR111 CODE E27 2x max 70W 1V7251 E27 G53 1x max 70W + 2x max 100W 1V7252 H P H P h L l L l IP23 5,4 o QR111 CODE 7,5 IP23 o QR111 CODE G53 2x max 100W 1V7248 G53 3x max 100W 1V7249 H P h H P h L l L l IP23 4,0 o QR-CB 51 CODE 4,3 IP23 o QR-CB 51 CODE GU5.3 2x max 50W 1V7245 GU5.3 3x max 50W 1V7246 H P h H P h L l L l L H P l h L H P l h HIPAR HIPAR QR QR QR-CB QR-CB 51 REMOTE SUPPLY LxPxH CODE H P L Magnetic power supply V 50/60 Hz 35W 70W 214x79x79 mm 214x79x79 mm Electronic power supply V 50/60 Hz 35W 70W 150x35x80 mm 150x35x80 mm 1T0500 1T0501 Magnetic transformer 230V/12V AC 50-60Hz 300W Ø 182 mm H 90 mm 1V7163 Electronic transformer /12V AC 50/60 Hz dimmable TRIAC + IGBT 20-60W 94x20x31 mm W 118x21x35 mm RECESSED PROJECTORS RECESSED PROJECTORS 183

94 ARGON PURA LUCE The fixtures white dress allows to hide it from view while illuminating any type of environment that requires flexibility, precision and performance. From the simple single module to the triple module, the Argon series can be equipped with any pre-focused light source, from small dichroic halogens to high-performance discharge lamps. Emilio Pucci Museum - Villa Granaiolo, Castelfioentino - Florence, Italy. 184 RECESSED PROJECTORS RECESSED PROJECTORS 185

95 ARGON Adjustable recessed fixture for plasterboard false ceilings for pre focused metal halide and halogen lamps. The fixture consists of an optic support and a square gypsum frame, which is to be plastered onto the plasterboard ceiling. The optics can be adjusted 355 horizontally and 35 vertically. The fixture is to be equipped with the bottom screen in translucent methacrylate. Power supply available as an accessory. IP23 o HIR111-CE SUPPLY WEIGHT CODE IP23 o QR-CB 51 SUPPLY WEIGHT CODE GX8.5 1x 35/70W accessory 3,1 Kg 1V7413 GU5.3 1x max 50W 12V accessory 1,9 Kg 1V7411 2x 35/70W accessory 4,1 Kg 1V7416 2x max 50W 12V accessory 2,3 Kg 1V7414 3x 35/70W accessory 5,0 Kg 1V7419 3x max 50W 12V accessory 2,8 Kg 1V7417 LOWER TRANSLUCENT SCREEN COLOUR DIMENSIONS CODE LOWER TRANSLUCENT SCREEN COLOUR DIMENSIONS CODE white 150x150 mm 1V7427 white 100x100 mm 1V7423 white 300x150 mm 1V7435 white 200x100 mm 1V7431 white 450x150 mm 1V7443 white 300x100 mm 1V7439 IP23 o QR111 SUPPLY WEIGHT CODE REMOTE SUPPLY LxPxH CODE G53 1x max 50W 12V accessory 3,1 Kg 2x max 50W 12V accessory 4,1 Kg 1V7412 1V7415 H P L Electronic power supply V 50/60 Hz 35W 70W 150x35x80 mm 150x35x80 mm 1T0500 1T0501 3x max 50W 12V accessory 5,0 Kg 1V7418 Magnetic transformer 230V/12V AC 50-60Hz 300W Ø 182 mm H 90 mm 1V7163 LOWER TRANSLUCENT SCREEN COLOUR DIMENSIONS CODE Electronic transformer /12V AC 50/60 Hz dimmable TRIAC + IGBT 20-60W 94x20x31 mm W 118x21x35 mm white white white 150x150 mm 300x150 mm 450x150 mm 1V7427 1V7435 1V7443 FOR HIR111-CE AND QR111 LAMPS FOR QR-CB 51 LAMPS mm mm mm mm mm mm mm mm mm mm mm mm 186 RECESSED PROJECTORS RECESSED PROJECTORS 187

96 QUADRO Square trimless recessed low luminance fixture for halogen and sources. Body and counter-ring in a single die-cast aluminium element painted white and fully recessable into the false ceiling. the corner version has a special shape to be installed in the corner between the ceiling and the wall. Can be adjusted +/-30 vertically and 355 horizontally. Remote electronic transformer available as an accessory. IP23 o SMALL QR-CB 51 MR16 VERSION WEIGHT CODE GU5.3 max 50W 12V / 5,5W / 7,5W fixed 0,1 Kg 1T mm 123 Version with MR16 lamp can be powered using an electronic transformer for halogen lamps. MR16 lamp 5,5W not dimmable, MR16 lamp 7,5W dimmable. 65mm Ø 63 65mm LARGE IP23 o QR111 DR111 VERSION WEIGHT CODE G53 max 100W 12V / 15W fixed 0,2 Kg max 100W 12V / 15W adjustable 0,2 Kg 1T1200 1T mm P DR111 lamp not dimmable. h L l CORNER LARGE L P l h QR111 DR111 VERSION WEIGHT CODE Fixed Adjustable Adjustable corn. G53 max 100W 12V / 15W adjustable 0,2 Kg DR111 lamp not dimmable. 1T1895 LAMPS DR111 OPTIC COLOUR CODE G53 15W SP (24 ) 3000K 15W FL (35 ) 3000K 0B333 0B334 MR16 GU5.3 5,5W FL (50 ) 3000K 7,5W FL (38 ) 3000K 0B330 0B331 For correct operation of QUADRO version, we recommend use of the lamps and the accessory ballasts indicated in this catalogue. REMOTE SUPPLY LxPxH CODE Helium Schöpflin Stiftung - Germany. Phographer: Günther Lehnert H P L Electronic transformer V/12V AC 50-60Hz dimmable TRIAC + IGBT 20-60W 94x20x31 mm W 118x21x35 mm RECESSED PROJECTORS RECESSED PROJECTORS 189

97 PROJECTORS

98 Ó PROFESSIONAL PROJECTOR FOR AND METAL HALIDE LAMPS A LINE ENHANCED BY CONSTANT DEVELOPMENT The Ó projector stands out for its natural attitude for innovation. The fixture is minimalist, compact and light, especially the versions, thanks to drivers that are built into the body of the fixture. PROJECT PROFESSION The new TARGETTI Ò projector offers both and discharge lamp versions with differentiated power ratings and a highly distinctive style. Whether the environment is contained and intimate or spacious and complex, Ò provides all the power and efficacy of a comprehensive lighting range that is ready to meet any and every design requirement. 192 PROJECTORS PROJECTORS 193

99 Ó LONG-LASTING PERFORMANCE GUARANTEED Paris Plaza Norte -Lima, Perù With its latest generation sources Ò offers renewed style and efficacy of up to 87lm/W. Two power ratings are available (24W and 30W) and four different beam openings: Spot, Flood, Medium Wide Flood and Wide Flood. Thanks to passive heat management, Ò succeeds in keeping the s junction point temperature well below the data on the manufacturer s ratings plate, thereby guaranteeing excellent performances over the entire life cicle of the product. MULTI EFFECT ACCESSORIES Thanks to the special optic system, O is able not only to equip 4 different optics for the same number of beam widths, but a series of optic accessories as well. A screw tightening mechanism locks the optic onto a special cup which hides and protects the profile. This is where up to four different accessories contemporarily can be added for achieving highly professional final effects. DISCHARGE LAMP VERSIONS Available in two power ratings, 35W and 70W, the Ò discharge lamp version has the same compact design and high performance as the rest of the product range. Its high precision, extra-pure aluminium optic system with its choice of 3 beam openings, Spot, Flood and Wide Flood, limits any risk of glare by assuring perfectly controlled luminance. Its ample adjustability and double aiming block make it a highly versatile luminaire that is ideal for accent lighting in both stores and sales points and prestige historic and architectural locations too. ZOOM AND CUT OFF TUBE FOR HIGHLY PROFESSIONAL RESULTS Ò can be equipped with two unique optic accessories. The cutoff tube considerably reduces the fall-off component, focusing the emission. The zoom is designed with a sophisticated system of lenses capable of defining a precise beam with adjustable width around the object. 194 PROJECTORS PROJECTORS 195

100 Ó TUNABLE Exhibition El Greco Santa Cruz Museum Toledo, Spain. WIRELESS CONTROL COLOR TONES O Tunable offers a specifically designed array of carefully selected sources, capable of producing a a tuneable white light emission with very rich spectra, coming very close to the curve of the black body of the CIE diagram, where a huge number of different tones of white can be designed in their different compositions and final colour temperatures. Wireless technology is a perfect retrofit to Eurotrack standards which does not therefore entail additional tracks and wiring; it is possible to vary the blends of the emitted light of sources within the O Tunable. The result will always be a light with a rich spectrum along all its wavelengths, calibrated specifically for the artwork to be illuminated, and resulting in a surprisingly realistic effect. Besides the perceptive level, O TUNABLE technology also brings significant advantages in terms of preservation thanks to the exact control of the light emitted with no IR rays or dangerous UV rays and drastically reducing maintenance on the fixtures: no relamping is needed and the luminous flux is equal to 70% after operation hours. 196 PROJECTORS PROJECTORS 197

101 Ó Professional adjustable projector. Body in extruded aluminium available in three finishes: titanium grey, plaster white or deep black. Front interchangeable optic camera in black polycarbonate, back ring with radial grid for heat dissipation. s with warm or neutral white emission colour temperatures. Precision optics in metallized polycarbonate with spot, flood, medium-wide flood or wide flood beam openings. The body can be adjusted from 0 to 90 on a vertical plane and by 355 on a horizontal plane with double blocking equipped with a friction system. Possibility to assemble a wide range of accessories and optic screens. Electronic driver integrated in the body of the fixture. 1,0 OPTIC COLOUR FINISH CODE 1,2 OPTIC COLOUR FINISH CODE 24W SP 3000K Ra97 titanium grey TS724 1T W SP 3000K Ra97 titanium grey TS728 1T W FL 3000K Ra97 titanium grey TS725 1T W FL 3000K Ra97 titanium grey TS729 1T W MWFL 3000K Ra97 titanium grey TS726 1T W MWFL 3000K Ra97 titanium grey TS730 1T W WFL 3000K Ra97 titanium grey TS727 1T W WFL 3000K Ra97 titanium grey TS731 1T W SP 3000K Ra97 plaster white TS724 1T W SP 3000K Ra97 plaster white TS728 1T W FL 3000K Ra97 plaster white TS725 1T W FL 3000K Ra97 plaster white TS729 1T W MWFL 3000K Ra97 plaster white TS726 1T W MWFL 3000K Ra97 plaster white TS730 1T W WFL 3000K Ra97 plaster white TS727 1T W WFL 3000K Ra97 plaster white TS731 1T W SP 3000K Ra97 deep black TS724 1T W SP 3000K Ra97 deep black TS728 1T W FL 3000K Ra97 deep black TS725 1T W FL 3000K Ra97 deep black TS729 1T W MWFL 3000K Ra97 deep black TS726 1T W MWFL 3000K Ra97 deep black TS730 1T W WFL 3000K Ra97 deep black TS727 1T W WFL 3000K Ra97 deep black TS731 1T W SP 4000K Ra84 titanium grey TS724 1T W SP 4000K Ra84 titanium grey TS728 1T W FL 4000K Ra84 titanium grey TS725 1T W FL 4000K Ra84 titanium grey TS729 1T W MWFL 4000K Ra84 titanium grey TS726 1T W MWFL 4000K Ra84 titanium grey TS730 1T W WFL 4000K Ra84 titanium grey TS727 1T W WFL 4000K Ra84 titanium grey TS731 1T W SP 4000K Ra84 plaster white TS724 1T W SP 4000K Ra84 plaster white TS728 1T W FL 4000K Ra84 plaster white TS725 1T W FL 4000K Ra84 plaster white TS729 1T W MWFL 4000K Ra84 plaster white TS726 1T W MWFL 4000K Ra84 plaster white TS730 1T W WFL 4000K Ra84 plaster white TS727 1T W WFL 4000K Ra84 plaster white TS731 1T W SP 4000K Ra84 deep black TS724 1T W SP 4000K Ra84 deep black TS728 1T W FL 4000K Ra84 deep black TS725 1T W FL 4000K Ra84 deep black TS729 1T W MWFL 4000K Ra84 deep black TS726 1T W MWFL 4000K Ra84 deep black TS730 1T W WFL 4000K Ra84 deep black TS727 1T W WFL 4000K Ra84 deep black TS731 1T PROJECTORS PROJECTORS 199

102 Ó ACCESSORIES The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site OPTICAL ACCESSORIES ( version) Red 1T3424 Green 1T3425 TS ,6W TS ,6W Chromatic filters Interference flat glass filters. Blue 1T Imax 7847 cd/klm 14 KELVIN 3000K 4000K 1972 lm 2731 lm 1677 lm 2322 lm EFFICACY 61 lm/w 84 lm/w IMAX cd cd Imax 2938 cd/klm 28 KELVIN 3000K 4000K 1972 lm 2731 lm 1669 lm 2311 lm EFFICACY 61 lm/w 84 lm/w IMAX 5793 cd 8023 cd Tone filters Interference flat glass filters to vary the colour temperature of light. Yellow Magenta Gold Cold Peach 1T3427 1T3428 1T3431 1T3429 1T3430 TS ,6W KELVIN 3000K 4000K 1972 lm 2731 lm 1713 lm 2373 lm TS ,6W KELVIN 3000K 4000K 1972 lm 2731 lm 1738 lm 2407 lm Blade light filter Grooved refractive glass filter. This makes the beam take on an oval shape and when combined with narrow beams, the light blade appears more prominent. 1T3141 Imax 1654 cd/klm 45 EFFICACY 62 lm/w 86 lm/w IMAX 3263 cd 4518 cd Imax 1142 cd/klm 59 EFFICACY 63 lm/w 87 lm/w IMAX 2252 cd 3119 cd Diffusive filter Microprismatic refractive flat glass filter. This softens the luminous effect. 1T3140 TS ,4W TS ,4W KELVIN 3000K 4000K 2429 lm 3188 lm 2066 lm 2711 lm KELVIN 3000K 4000K 2429 lm 3188 lm 2056 lm 2698 lm Anti-glare grid Black lacquered metal honeycomb grid. 1T3423 Imax 7850 cd/klm 14 EFFICACY 60 lm/w 79 lm/w IMAX cd cd Imax 2938 cd/klm 28 EFFICACY 60 lm/w 78 lm/w IMAX 7136 cd 9365 cd Cut-off Tube Allows for the beam to be focused while removing the fall-off component. 1T3142 TS ,4W KELVIN 3000K 4000K 2429 lm 3188 lm 2111 lm 2771 lm TS ,4W KELVIN 3000K 4000K 2429 lm 3188 lm 2141 lm 2810 lm Zoom Allows for the beam to be manually focused and shaped into different dimensions through the use of a system of lenses, resulting in a very uniform and defined effect. 1T3432 Imax 1655 cd/klm 45 EFFICACY 61 lm/w 80 lm/w IMAX 4020 cd 5276 cd Imax 1142 cd/klm 59 EFFICACY 62 lm/w 82 lm/w IMAX 2774 cd 3641 cd Asymmetric screen Metal painted asymmetric screen, to be complited with holder ring, ideal for a wall wash effect. 1T3143 Ceiling mounting adapter Adapter for Eurostandard type projectors to be installed on the ceiling. Diameter is 100mm; 32mm thick. Recessed adapter Adapter for a recessed installation of Eurostandard type projectors. Outer diameter is 130 mm. Recess hole depth 60 mm. Recess hole diameter 105/125 mm. Aluminium White Black Aluminium White Black 1T2219 1T2221 1T2220 1T2224+1T2219 1T2223+1T2221 1T2222+1T PROJECTORS PROJECTORS 201

103 Ó HIT ACCESSORIES Professional adjustable projector for metal halide lamps. Optic body in extruded aluminium painted deep black, plaster white and titanium grey. Front ring and back ring with radial grid for heat dissipation, in metal with black paint finish. Double locking of the pointing by means of cap screws with hidden access points. Power supply body in extruded aluminium painted in the same colour as the optic body. The two bodies are separated from each other to optimise heat dissipation; terminals in black polycarbonate. Precision optics in super-pure aluminium. Optic body can be adjusted by 0 to -90 on a vertical plane and by 355 on a horizontal plane by means of an articulated joint in die-cast aluminium. Electronic driver integrated. Accessory holder front Cut-off screen Asymmetric screen 1T2910 1T2911 1T2912 Anti-glare louver 1T1711 1,8 HIT-Tc-CE OPTIC FINISH CODE FILTERS G8.5 35W SP titanium grey TS646 1T2841 Red 1T W FL titanium grey TS647 1T2842 Green 1T W WFL titanium grey TS648 35W SP plaster white TS646 1T2843 1T2844 Chromatic and UV Stop Blue Yellow 1T1714 1T W FL plaster white TS647 1T2845 Magenta 1T W WFL plaster white TS648 1T2846 UV Stop 1T W SP deep black TS646 1T2847 Sun 1T W FL deep black TS647 1T2848 Corrective Sunset 1T W WFL deep black TS648 1T2849 Polar 1T W SP titanium grey TS646 1T W FL titanium grey TS647 1T2851 Blade of light filter 1T W WFL titanium grey TS648 1T W SP plaster white TS646 1T W FL plaster white TS647 1T2854 Soft beam filter 1T W WFL plaster white TS648 1T W SP deep black TS646 70W FL deep black TS647 70W WFL deep black TS648 1T2856 1T2857 1T2858 Ceiling mounting adapter Adapter for Eurostandard type projectors to be installed on the ceiling. Diameter is 100 mm; 32mm thick. Aluminium White Black 1T2219 1T2221 1T2220 TS TS TS Recessed adapter Adapter for a recessed installation of Eurostandard type projectors. Outer diameter is 130 mm. Recess hole depth 60 mm. Recess hole diameter 105/125 mm. Aluminium White Black 1T2224+1T2219 1T2223+1T2221 1T2222+1T cd/1000lm cd/1000lm cd/1000lm HIT-CE 56% I max 4166 cd/klm α = 15 HIT-CE 52% I max 2496 cd/klm α = 22 HIT-CE 43% I max 442cd/klm α = PROJECTORS PROJECTORS 203

104 RAY Professional projectors ESSENTIAL DESIGN Distinguished for its essential design, the RAY projector is clearly intended for retail projects. Clean profiles, absolute matt colors, totally tool free, sources, with power output up to 50W and differentiated optics. Two sizes to satisfy different exigencies in terms of scale for a complete lighting project. Simple but at the same time distinguished by details and performance of a surely leading character. Waku Waku Dammtor, Germany - Interior design: Ippolito Fleitz Group, Germany - Photographer: Benjamin Nadjib PERFECTLY BALANCED RAY has been carefully designed to ensure that its center of gravity is always aligned with the track independently of where it is aimed. This enables the projectors weight to be distributed evenly on the track which does not bend and stays parallel to the floor, even after all the fixtures have been positioned. VERSIONS UP TO 6500 LUMEN RAY using the innovative power- sources of up to 6500lm and beam intensities of over candela; the same performance of a discharge lamp and zero maintenance. PROJECTORS 205

105 RAY RAY MINI Professional adjustable projector. Die-cast aluminium body painted with deep black or plaster-white finish. Front ring made of black ryton, high temperature plastic polymer. High output with warm white light emission Ra84. Ra97 on request. Super-pure aluminium precision optic with ellipsoidal convex facets. Spot, flood or wide flood beam angles. Adjustable from 0 to -90 in the vertical plane and 359 in the horizontal plane. Mechanical aiming lock in vertical plane and graduated ring nut for locking in the horizontal plane. EUROSTANDARD adapter. Electronic driver built into luminaire body. Professional adjustable projecto. Die-cast aluminium body painted with deep black or plaster-white finish. Front ring made of black ryton, high temperature plastic polymer. High output with warm white light emission Ra84. Ra97 and 4000K on request. Metallised polycarbonate precision optic with ellipsoidal convex facets. Spot, flood or medium wide flood beam angles. Adjustable from 0 to -90 in the vertical plane and 359 in the horizontal plane. Mechanical aiming lock in vertical plane and graduated ring nut for locking in the horizontal plane. EUROSTANDARD adapter. Electronic driver built into luminaire body. 2,8 OPTIC COLOUR FINISH CODE 2,8 OPTIC COLOUR FINISH CODE 32W SP 3000K White TS 742 1T W SP White TS 832 1T W FL 3000K White TS 740 1T W FL White TS 833 1T W SP 3000K Black TS 742 1T ø115 30W MWFL White TS 834 1T W FL 3000K Black TS 740 1T W SP Black TS 832 1T W FL 3000K White TS 741 1T W FL Black TS 833 1T W WFL 3000K White TS 743 1T W MWFL Black TS 834 1T W FL 3000K Black TS 741 1T W WFL 3000K Black TS 743 1T3695 RAY 4000K version available on request. TS W TS W TS ,2W TS ,2W KELVIN 3000K KELVIN 3000K KELVIN 3000K KELVIN 3000K lm 2866 lm lm 2802 lm lm 2477 lm lm 2468 lm EFFICACY 80 lm/w EFFICACY 78 lm/w cd/1000lm EFFICACY 75 lm/w cd/1000lm EFFICACY 74 lm/w Imax cd/klm 10 IMAX cd Imax 3426 cd/klm 26 IMAX cd α = 14 Imax 7845 cd/klm IMAX cd α = 28 Imax 2939 cd/klm IMAX 8564 cd TS W TS W TS ,2W KELVIN 3000K KELVIN 3000K KELVIN 3000K The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site Imax 3071 cd/klm 28 EFFICACY IMAX 6498 lm 5334 lm 97 lm/w cd Imax 1296 cd/klm 51 EFFICACY IMAX 6498 lm 5273 lm 96 lm/w 8425 cd cd/1000lm α = Imax 1655 cd/klm EFFICACY IMAX 2914 lm 2532 lm 76 lm/w 4821 cd ACCESSORIES Flaps 1T PROJECTORS PROJECTORS 207

106 RAY MINI ACCESSORIES OPTICAL ACCESSORIES Chromatic filters Interference flat glass filters. Tone filters Interference flat glass filters to vary the colour temperature of light. Blade light filter Grooved refractive glass filter. This makes the beam take on an oval shape and when combined with narrow beams, the light blade appears more prominent. Red Green Blue Yellow Magenta Gold Cold Peach 1T1712 1T1713 1T1714 1T1715 1T1716 1T1786 1T1777 1T1759 1T1708 Diffusive filter Microprismatic refractive flat glass filter. This softens the luminous effect. 1T1709 Anti-glare grid Black lacquered metal honeycomb grid. 1T1711 Cut-off Tube Allows for the beam to be focused while removing the fall-off component. 1T3142 Zoom Allows for the beam to be manually focused and shaped into different dimensions through the use of a system of lenses, resulting in a very uniform and defined effect. 1T3432 Asymmetric screen Metal painted asymmetric screen, to be complited with holder ring, ideal for a wall wash effect. 1T3143 Holder ring 1T3727 Ceiling mounting adapter Adapter for Eurostandard type projectors to be installed on the ceiling. Diameter is 100mm; 32mm thick. Recessed adapter Adapter for a recessed installation of Eurostandard type projectors. Outer diameter is 130 mm. Recess hole depth 60 mm. Recess hole diameter 105/125 mm. White Black White Black 1T2221 1T2220 1T2223+1T2221 1T2222+1T PROJECTORS PROJECTORS 209

107 PUR design Daniel Bernard PROFESSIONAL PROJECTOR FOR led sources AND METAL HALIDE LAMPS PERFECT DETAILS Formal rigor and extreme cleanliness of the volumes characterize the PUR professional projector. The defined lines, sharp edges, the pure forms that distinguish PUR are the result of careful study of the expressive potential of Ryton; resistant to high temperatures, Ryton allows one to obtain, through a careful production process, highly defined surfaces for attentive attention to detail. IMPRESSIVE AMBIENTS Optics with convex ellipsoidal facets find in PUR their natural design application, form and effect. Available in four beam angles, these optics are differentiated in the geometry and convexity of the facets for maximum precision of the light effect. Paris Plaza Norte - Lima, Perù 210 PROJECTORS

108 PUR RELIABLE AIM Easy aiming, reliable over time, thanks to the system with Allen screws hidden on the body and the optic chamber. Adjustability of the apparatus of 359 on the adaptater, from + to -90 of the optical body, with a graduated scale for precise and secure aiming of the projector. MAXIMUM COMFORT Different types of anti-glare spill rings especially tailored to the different lamps and reflectors allow optimal control of the beams of light for maximum visual comfort in any application. NEW HIGH PERFORMANCE PUR features an important update with new versions equipped with last generation COB and dedicated optics, according to the indoor programme of projectors. A new solution proposing precision and performance in order to fulfil the different exigencies of a complete project also thanks to dedicated professional accessories. TOOLS-FREE RELAMPING Instant, easy relamping without using tools. A simple movement of rotation and pressure on the glass allows for the extraction of the front for relamping; the security cable secures the front hooked to the body of the projector to allow you to carry out the tools-free maintenance in complete safety. 212 PROJECTORS PROJECTORS 213

109 PUR Professional projector for metal halide lamps. Entirely made in Ryton painted with Deep Black, Plaster White or Titanium Grey finishing. Completed with the new interchangeable optics with ellipsoidal convex facets. Antiglare spill-ring calibrated according to different beam angles. Adjustability of the optic body from -90 to +90 in the vertical plan and of the entire unit of 359 horizontally. Double locking of pointing through Allen screw with hidden access points. Electronic power supply separate from the optic body to optimize the dissipation of heat. Complete with extra clear tempered safety glass. 1,0 IP40 HIT-CE OPTIC SUPPLY COLOUR CODE G12 35W 35W 35W 35W 35W 35W SP FL MWFL WFL SP FL electronic electronic electronic electronic electronic electronic titanium grey titanium grey titanium grey titanium grey plaster white plaster white TS 565 TS 566 TS 567 TS 568 TS 565 TS 566 1T2573 1T2574 1T2575 1T2576 1T2565 1T W MWFL electronic plaster white TS W WFL electronic plaster white TS W SP electronic deep black TS W FL electronic deep black TS W MWFL electronic deep black TS W WFL electronic deep black TS W SP electronic titanium grey TS W FL electronic titanium grey TS W MWFL electronic titanium grey TS W WFL electronic titanium grey TS W SP electronic plaster white TS W FL electronic plaster white TS W MWFL electronic plaster white TS W WFL electronic plaster white TS W SP electronic deep black TS W FL electronic deep black TS W MWFL electronic deep black TS W WFL electronic deep black TS 568 1T2567 1T2568 1T2569 1T2570 1T2571 1T2572 1T2585 1T2586 1T2587 1T2588 1T2577 1T2578 1T2579 1T2580 1T2581 1T2582 1T2583 1T2584 Accesories See page PROJECTORS PROJECTORS 215

110 PUR ACCESSORIES OPTICAL ACCESSORIES ( versions) Red 1T3424 Professional projector fitted with sources. Body and optical unit in graphite filled polymer painted with deep black, plaster white and titanium grey finishes. Double aiming locking system with an Allen screw with hidden access points. Black anti-glare front ring. High emission warm white (3000K) or neutral white (4000K). Ra84; Ra97 on request. Primary optical unit complete with precision optics with convex facets in metallised polycarbonate available in Spot, Flood and Medium wide flood versions. Treated with a highly reflective Scratch Proof Formula. Adjustable optic body from -90 to +90 vertically and the entire unit 359 horizontally. Designed for installation with several optical accessories that can be ordered separately. Integrated EUROSTANDARD adaptor. Integrated electronic driver. Chromatic filters Interference flat glass filters. Tone filters Interference flat glass filters to vary the colour temperature of light. Blade light filter Grooved refractive glass filter. This makes the beam take on an oval shape and when combined with narrow beams, the light blade appears more prominent. Green Blue Yellow Magenta Gold Cold Peach 1T3425 1T3426 1T3427 1T3428 1T3431 1T3429 1T3430 1T3141 Diffusive filter Microprismatic refractive flat glass filter. This softens the luminous effect. 1T3140 1,0 IP40 OPTIC COLOUR FINISH CODE 19W SP 3000K Titanium grey TS W SP 4000K Titanium grey TS 783 1T3953 1T3954 Anti-glare grid Black lacquered metal honeycomb grid. 1T W FL 3000K Titanium grey TS W FL 4000K Titanium grey TS W MWFL 3000K Titanium grey TS 785 1T3955 1T3956 1T3957 Cut-off Tube Allows for the beam to be focused while removing the fall-off component. 1T W MWFL 4000K Titanium grey TS W SP 3000K Plaster white TS W SP 4000K Plaster white TS 783 1T3958 1T3941 1T3942 Zoom Allows for the beam to be manually focused and shaped into different dimensions through the use of a system of lenses, resulting in a very uniform and defined effect. 1T W FL 3000K Plaster white TS W FL 4000K Plaster white TS W MWFL 3000K Plaster white TS 785 1T3943 1T3944 1T3945 Asymmetric screen Metal painted asymmetric screen, to be complited with holder ring, ideal for a wall wash effect. 1T W MWFL 4000K Plaster white TS W SP 3000K Deep black TS 783 1T3946 1T3947 OPTICAL ACCESSORIES (HIT versions 19W SP 4000K Deep black TS 783 1T3948 UV Filter 1T W FL 3000K Deep black TS 784 1T W FL 4000K Deep black TS W MWFL 3000K Deep black TS W MWFL 4000K Deep black TS 785 1T3950 1T3951 1T3952 Diffusive filter Microprismatic refractive flat glass filter. This softens the luminous effect. 1T2455 ACCESSORIES (all versions) TS Imax 6467 cd/klm 13 21W KELVIN 3000K 4000K 1904 lm 1980 lm 1610 lm 1674 lm EFFICACY 77 lm/w 80 lm/w IMAX cd cd TS Imax 3210 cd/klm 25 21W KELVIN 3000K 4000K 1904 lm 1980 lm 1603 lm 1667 lm EFFICACY 76 lm/w 79 lm/w IMAX 6113 cd 6358 cd TS Imax 1675 cd/klm 43 21W KELVIN 3000K 4000K 1904 lm 1980 lm 1646 lm 1711 lm EFFICACY 78 lm/w 81 lm/w IMAX 3190 cd 3318 cd Ceiling mounting adapter Adapter for Eurostandard type projectors to be installed on the ceiling. Diameter is 100mm; 32mm thick. Recessed adapter Adapter for a recessed installation of Eurostandard type projectors. Outer diameter is 130 mm. Recess hole depth 60 mm. Recess hole diameter 105/125 mm. Aluminium White Black Aluminium White Black 1T2219 1T2221 1T2220 1T2224+1T2219 1T2223+1T2221 1T2222+1T PROJECTORS PROJECTORS 217

111 MAGMA PROFESSIONAL PROJECTOR FOR HALOGEN, METAL HALIDE AND SOURCES WIDE SELECTION The MAGMA projector series is part of a family of lighting fixtures which is designed with optics that employ all of the most commonly used indoor lighting sources. The multitude of optics, the numerous lighting sources implemented and the countless installation possibilities render MAGMA series projectors suitable for the installation in any environment, from retail lighting to display lighting, and in any architectural situation in which the light must be aimed with precision. NEW HIGH PERFORMANCE MAGMA features an important update with new versions equipped with last generation COB and dedicated optics, according to the indoor programme of projectors. A new solution proposing precision and performance in order to fulfil the different exigencies of a complete project also thanks to dedicated professional accessories. AIMING STABILITY The long-lasting adjustment of the projectors is ensured by their two fastening bolts which act upon the rotation hinges and maintain the desired direction, even after relamping operations. The horizontal adjustability of 359, and the vertical adjustability from +70 to -90, allow for these projectors to be oriented in any required direction. MABIC - Maranello Library, Modena (Italy) - Project: Arata Isozaki, Andrea Maffei. 218 PROJECTORS PROJECTORS 219

112 MAGMA Professional projector. Painted die-cast aluminium power supply body and optic body. The body can be adjusted to 359 horizontally and the optic unit can be adjusted to 180 vertically using the aiming locking system. High emission warm white or neutral white. Ra84; Ra97 on request. Precision optics with convex facets in metallised polycarbonate available in Spot, Flood and Medium wide flood versions. Treated with a highly reflective Scratch Proof Formula. A large range of accessories and optic screens can be fitted to the fixture. The integrated electronic driver is separated from the optic unit to optimise heat dissipation. 1,8 OPTIC FINISHES COLOR CODE TS ,2W Accesories See page W SP plaster white 3000K TS W SP plaster white 4000K TS W SP aluminium 3000K TS W SP aluminium 4000K TS W SP black 3000K TS 631 1T4031 1T4032 1T4033 1T4034 1T Imax 1655 cd/klm 45 KELVIN 3000K 4000K 3140 lm 3234 lm 2729 lm 2810 lm EFFICACY 77 lm/w 80 lm/w IMAX 5196 cd 5352 cd Adapter for ceiling and recessed installation See page W SP black 4000K TS 631 1T4036 TS ,2W 32W FL plaster white 3000K TS W FL plaster white 4000K TS W FL aluminium 3000K TS 632 1T4037 1T4038 1T KELVIN 3000K 4000K 3140 lm 3234 lm 2658 lm 2738 lm 32W FL aluminium 4000K TS W FL black 3000K TS 632 1T4040 1T4041 Imax 2949 cd/klm 28 EFFICACY 75 lm/w 78 lm/w IMAX 9258 cd 9536 cd 32W FL black 4000K TS 632 1T4042 TS ,2W 32W MWFL plaster white 3000K TS 633 1T KELVIN 3000K 4000K 32W MWFL plaster white 4000K TS W MWFL aluminium 3000K TS 633 1T4044 1T lm 3234 lm 2670 lm 2750 lm 32W MWFL aluminium 4000K TS W MWFL black 3000K TS 633 1T4046 1T4047 Imax 7810 cd/klm 14 EFFICACY 76 lm/w 78 lm/w IMAX cd cd 32W MWFL black 4000K TS 633 1T4048 The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site PROJECTORS PROJECTORS 221

113 MAGMA Hermitage Museum Repository - St Petersburg, Russia Project: Trofimov Studio 222 PROJECTORS PROJECTORS 223

114 MAGMA HIT / QR111 Professional projector for halogen and metal halide lamps. Die cast painted aluminium power supply and optics housings. 359 adjustable body on the horizontal axis. 180 adjustable optics on the vertical axis with mechanical locking device to ensure aiming stability. Metal halide version to be completed with the precision elliptical optics with convex facets. Optics are equipped with ring and protection glass to be ordered separately in the same colour of the fixture. Bayonet lock mounting system for an easy relamping. Anti-glare steel spill ring inside the optics housing. Electronic power supply separated from the optics housing in order to optimize the heat dissipation. IP40 HIT-CE COLOUR SUPPLY WEIGHT CODE IP40 QR111 COLOUR SUPPLY WEIGHT CODE G12 35W aluminium electronic 1,1 Kg 1T2081N G53 max100w aluminium electronic 1,1 Kg 1T2087N 35W white electronic 1,1 Kg 1T2079N max100w white electronic 1,1 Kg 1T2085N 35W black electronic 1,1 Kg 1T2080N max100w black electronic 1,1 Kg 1T2086N 70W aluminium electronic 1,1 Kg 1T2084N 70W white electronic 1,1 Kg 1T2082N Accesories See page W black electronic 1,1 Kg 1T2083N 150W aluminium electronic 1,4 Kg 1T2284N Adapter for ceiling and recessed installation See page W white electronic 1,4 Kg 1T2282N 150W black electronic 1,4 Kg 1T2283N OPTIC COLOUR CODE SP aluminium TS 585 SP white TS 585 SP black TS 585 FL aluminium TS 586 FL white TS 586 FL black TS 586 MWFL aluminium TS 587 MWFL white TS 587 MWFL black TS 587 WFL aluminium TS 588 WFL white TS 588 WFL black TS 588 1T2105N 1T2097N 1T2101N 1T2106N 1T2098N 1T2102N 1T2560N 1T2558N 1T2559N 1T2107N 1T2099N 1T2103N 224 PROJECTORS PROJECTORS 225

115 MAGMA WALL HIT/QR111 Professional projector for halogen and metal halide lamps. Die cast painted aluminium power supply and optics housings. Wall mounting system through die cast aluminium bracket which allows +/-120 adjustment on the horizontal axis of fixture body. 180 adjustable optics on the vertical axis with mechanical locking device to ensure aiming stability. Metal halide version to be completed with the precision elliptical optics with convex facets. Optics are equipped with ring and protection glass to be ordered separately in the same colour of the fixture. Bayonet lock mounting system for an easy relamping. Antiglare steel spill ring inside the optics housing. Electronic power supply separated from the optics housing in order to optimize the heat dissipation. IP40 1,1 HIT-CE COLOUR SUPPLY CODE IP40 QR111 COLOUR SUPPLY CODE G12 35W aluminium electronic 1T2287N G53 max100w aluminium electronic 1T2293N 35W white electronic 1T2285N max100w white electronic 1T2291N 35W black electronic 1T2286N max100w black electronic 1T2292N 70W aluminium electronic 1T2290N 70W white electronic 1T2288N Accesories See page W black electronic 1T2289N OPTIC COLOUR CODE SP aluminium TS 585 SP white TS 585 SP black TS 585 FL aluminium TS 586 FL white TS 586 FL black TS 586 MWFL aluminium TS 587 MWFL white TS 587 MWFL black TS 587 WFL aluminium TS 588 WFL white TS 588 WFL black TS 588 1T2105N 1T2097N 1T2101N 1T2106N 1T2098N 1T2102N 1T2560N 1T2558N 1T2559N 1T2107N 1T2099N 1T2103N 226 PROJECTORS PROJECTORS 227

116 MAGMA ACCESSORIES HIT-CE QR111 Chromatic and UV Stop filters Interference filters on flat glass. UV filter to reduce the UV/B rays and block (>90%) the UV/A rays. Diameter is 101 mm. To be completed with additional holder ring. 1T1712 1T1713 1T1714 1T1715 1T1716 Red Green Blue Yellow Magenta 1T1700 1T1701 1T1702 1T1703 1T1704 1T1698 Red Green Blue Yellow Magenta UV Stop 1T1700 1T1701 1T1702 1T1703 1T1704 1T1698 Red Green Blue Yellow Magenta UV Stop Corrective filters Interference filters on flat glass to vary the colour temperature of the light. Diameter is 101 mm. To be completed with additional holder ring. 1T1786 Sun 1T1777 Sunset 1T1759 Polar 1T1705 Sun 1T1706 Sunset 1T1707 Polar 1T1705 Sun 1T1706 Sunset 1T1707 Polar Diffusive and Blade filter Refractive filter on flat glass. Wired diffusive filter to soften the luminous effect; ribbed blade filter to ovalize the beam. Diameter is 101 mm. To be completed with additional holder ring. 1T1709 1T1708 Diffusive Blade of light 1T1697 1T1696 Diffusive Blade of light 1T1697 1T1696 Diffusive Blade of light Holder ring Painted aluminium ring to hold the accessories. 1T3727 1T2111N 1T2109N 1T2110N Aluminium White Black 1T2111N 1T2109N 1T2110N Aluminium White Black Anti-glare grid Honey comb structure made of black painted metal. HIT-CE and QR111 versions complete with holder ring and transparent protection glass. Diameter is 101 mm. Max 70W in the HIT-CE version. 1T3423 1T2563N 1T2561N 1T2562N Aluminium White Black Barn door flaps Adjustable barn door flaps made of metal painted black. 1T2112 Black 1T2112 Black 1T2112 Black Asymmetric screen Metal painted asymmetric screen. HIT-CE and QR111 versions complete with holder ring. 1T2259 1T2260 1T2261 White/Black Grey/Black Black 1T2259 1T2260 1T2261 White/Black Grey/Black Black 1T2259 1T2260 1T2261 White/Black Grey/Black Black Ceiling mounting adapter Adapter for Eurostandard type projectors to be installed on the ceiling. Diameter is 100 mm; 32 mm thick. 1T2219 1T2221 1T2220 Aluminium White Black 1T2219 1T2221 1T2220 Aluminium White Black 1T2219 1T2221 1T2220 Aluminium White Black Recessed adapter Adapter for a recessed installation of Eurostandard type projectors. Outer diameter is 130 mm. Recess hole depth 60 mm. Recess hole diameter 105/125 mm. 1T2224+1T2219 Aluminium 1T2223+1T2221 White 1T2222+1T2220 Black 1T2224+1T2219 Aluminium 1T2223+1T2221 White 1T2222+1T2220 Black 1T2224+1T2219 Aluminium 1T2223+1T2221 White 1T2222+1T2220 Black Paris Copiapò Store - Copiapò, Chile. 228 PROJECTORS PROJECTORS 229

117 FOHO PROFESSIONAL PROJECTOR FOR HALOGEN AND METAL HALIDE LAMPS TYPE LAMP OPTIC SP FL WFL HIT-CE 70W 150W 70W 150W 70W 150W HIT-Tc-CE 35W 50W 70W 35W 50W 70W 35W 50W 70W QPAR30 100W 100W COMPACT AND VERSATILE With an essential and extremely compact design, the professional FOHO projector guarantees maximum functional versatility. The fixture is designed for pre-focused halogen or metal halide lamps with three different beam angles. The interchangeable professional optics, with a pure aluminium reflective treatment, allow for clean and precise beams of light to be obtained. QR-111 max 100W max 100W max 100W RELIABLE AND PERFORMING Attention to details and selected materials, with the optical body and the power supply compartment separated in order to guarantee superior heat dissipation. High precision ring-nuts guarantee quick, easy and lasting alignment. QR-CB51 max 50W max 50W max 50W 230 PROJECTORS PROJECTORS 231

118 FOHO SMALL BIG Professional projector for metal halide lamps. Metal painted body with die-cast aluminium bearing structures painted in titanium in the aluminium versions and same colour in the other versions. Can be adjusted from 0 to -90 vertically and 359 horizontally. Bar locking system. To be completed with precision optics that have a parabolic section presenting different profiles and finishes according to the beam angle. Transparent feeding cable. Electronic power supply located in the rear side of the fixture in order to optimise heat dissipation. Complete with borosilicate safety glass. Professional projector for metal halide lamps. Metal painted body with die-cast aluminium bearing structures painted in titanium in the aluminium versions and same colour in the other versions. Can be adjusted from 0 to -90 vertically and 359 horizontally. Graduated ring nut for the locking system. To be completed with precision optics that have a parabolic section presenting different profiles and finishes according to the beam angle. Transparent feeding cable. Electronic ballast power factor corrected located in the rear side of the fixture in order to optimise heat dissipation. Complete with borosilicate safety glass. IP40 HIT-Tc-CE COLOUR SUPPLY WEIGHT CODE IP40 HIT-CE COLOUR SUPPLY WEIGHT CODE G8.5 35W Aluminium electronic 0,8 Kg 1T2029 G12 70W Aluminium electronic 2,1 Kg 1T W White electronic 0,8 Kg 1T W White electronic 2,1 Kg 1T W Black electronic 0,8 Kg 1T W Black electronic 2,1 Kg 1T W Aluminium electronic 0,8 Kg 1T W Aluminium electronic 2,7 Kg 1T W White electronic 0,8 Kg 1T W White electronic 2,7 Kg 1T W Black electronic 0,8 Kg 1T W Black electronic 2,7 Kg 1T3635 OPTIC COLOUR CODE OPTIC COLOUR CODE SP Aluminium TS 475 1T2044 SP Aluminium TS 379 1T2035 SP White TS 475 1T2047 SP White TS 379 1T2038 SP Black TS 475 1T2050 SP Black TS 379 1T2041 FL Aluminium TS 445 1T2045 FL Aluminium TS 474 1T2036 FL White TS 445 1T2048 FL White TS 474 1T2039 FL Black TS 445 1T2051 FL Black TS 474 1T2042 WFL Aluminium TS 476 1T2046 WFL Aluminium TS 381 1T2037 WFL White TS 476 1T2049 WFL White TS 381 1T2040 WFL Black TS 476 1T2052 WFL Black TS 381 1T2043 Accesories See page PROJECTORS PROJECTORS 233

119 FOHO Projector for halogen and halogen dichroic lamps. Metal painted body with die-cast aluminium bearing structures painted in titanium in the aluminium versions and same colour in the other versions. Can be adjusted from 0 to -90 vertically and 359 horizontally. Bar locking system. Transparent feeding cable. Electronic transformer located in the rear side of the fixture in order to optimise heat dissipation. QR-111 version complete with a front silicone ring that is polished black finish. 0,6 QPAR 30 COLOUR CODE E27 100W Aluminium 1T W 100W White Black 1T0759 1T1357 0,6 QR111 COLOUR SUPPLY CODE G53 max 100W Aluminium electronic max 100W White electronic max 100W Black electronic 1T0684 1T0685 1T1359 0,6 QR-CB 51 COLOUR SUPPLY CODE GU5.3 max 50W Aluminium electronic max 50W White electronic max 50W Black electronic 1T0690 1T0691 1T1377 Hermitage Museum Repository - St Petersburg, Russia Project: Trofimov Studio 234 PROJECTORS PROJECTORS 235

120 FOHO SUSPENSION Professional suspended projector for metal halide lamps. Metal painted body with die-cast aluminium bearing structures painted in titanium in the aluminium versions and same colour in the other versions. Can be adjusted from 0 to -90 vertically and 359 horizontally. Graduated double ring nut for the locking system on the projector and the ceiling rose. To be completed with interchangeable precision optics that have a parabolic section presenting different profiles and finishes according to the beam angle. Complete with borosilicate safety glass. Complete with two steel suspension cables with micrometric adjustment system and feeding cable (L mm). Electronic ballast power factor corrected located in the rear side of the fixture in order to optimise heat dissipation. IP40 HIT-CE COLOUR SUPPLY WEIGHT CODE G12 70W Aluminium electronic 2,1 Kg 70W White electronic 2,1 Kg 150W Aluminium electronic 2,7 Kg 150W White electronic 2,7 Kg 1T3636 1T3637 1T3638 1T3639 OPTIC COLOUR CODE SP Aluminium TS 379 SP White TS 379 FL Aluminium TS 474 FL White TS 474 WFL Aluminium TS 381 WFL White TS 381 1T2035 1T2038 1T2036 1T2039 1T2037 1T2040 Accesories See page PROJECTORS PROJECTORS 237

121 FOHO ACCESSORIES HIT-CE HIT-Tc-CE QPAR 30 QR111 QR-CB 51 Chromatic filters and UV Stop filters Interference filters on flat glass. UV Stop filter reduces the UV/B rays and blocks (>90%) the UV/A rays Red Green Blue Yellow Magenta UV Stop 1T1712 1T1713 1T1714 1T1715 1T1716 1T1710 Red Green Blue Yellow Magenta UV Stop Universal filters see page Red Green Blue Yellow Magenta UV Stop Corrective filters Interference filters on flat glass to vary the colour temperature of the light Sun Sunset Polar 1T1717 Sun 1T1718 Sunset 1T1719 Polar Blade of light filter Ribbed refractive filter on flat glass. This makes the beam take on an oval shape and when combined with spotlights, the light blade appears more prominent. 1T1708 Diffusive filter Wired refractive filter on flat glass. This softens the luminous effect. 1T1709 Anti-glare grid Honey comb structure made of metal painted black. Max 35W in the HIT-Tc-CE lamp. 1T1711 max 35W Barn doors flaps Adjustable barn doors flaps made of metal painted black. 1T0739 1T0741 Shaper Adjustable highly efficient optical system with four guillotine-type shaping lamellas that can be adjusted and a removable mask. 1T0742 Ceiling and wall mounted adapter (1) Adapter for Eurostandard type projectors to be installed on the ceiling. Diameter is 100mm; 32mm thick. 1T2219 1T2221 1T2220 Aluminium White Black 1T2219 1T2221 1T2220 Aluminium White Black 1T2219 1T2221 1T2220 Aluminium White Black 1T2219 1T2221 1T2220 Aluminium White Black 1T2219 1T2221 1T2220 Aluminium White Black Recessed adapter (1) Adapter for a recessed installation of Eurostandard type projectors. Outer diameter is 130 mm. Recess hole depth 60 mm. Recess hole diameter 105/125 mm. 1T2224+1T2219 Aluminium 1T2223+1T2221 White 1T2222+1T2220 Black 1T2224+1T2219 Aluminium 1T2223+1T2221 White 1T2222+1T2220 Black 1T2224+1T2219 Aluminium 1T2223+1T2221 White 1T2222+1T2220 Black 1T2224+1T2219 Aluminium 1T2223+1T2221 White 1T2222+1T2220 Black 1T2224+1T2219 Aluminium 1T2223+1T2221 White 1T2222+1T2220 Black (1) Not installable on walls if combined with the HIT-CE versions. 238 PROJECTORS PROJECTORS 239

122 COVE PROJECTOR PROFESSIONAL PROJECTOR FOR METAL HALIDE LAMPS LIGHT PROJECTED FROM CORNICES An adjustable spot light for base mounted installation. The fixture s body can be easily hidden on shelving and on cornices while the separate optical body can be freely adjusted, offering extremely flexible orientation. The fixture can be configured in two different manners so as to increase its adjustability. The joint can be positioned on top of the base, in a vertical position, in order to easily illuminate the floor, or else positioned above the base in order to illuminate ceilings and vaults. Tribuna degli Uffizi - Florence, Italy - Lighting design: Massimo Iarussi 240 PROJECTORS PROJECTORS 241

123 COVE PROJECTOR ACCESSORIES Red Projector for metal halide lamps. Feeder body and optic body made of painted metal. Die-cast aluminium front ring and articulated joints. The optics can be adjusted 359 horizontally and +/-90 vertically, with a locking system. Precision optics with a parabolic section presenting different profiles and finishes according to the beam angle. Electronic power supply separated from the optical unit in order to optimise heat dissipation. Complete with borosilicate safety glass. Set-up for the accessory holder extension bar to be mounted. Chromatic and UV Stop filters Interference colour filters on flat glass. Interference UV filter on flat glass to reduce the UV/B rays and block (>90%) the UV/A rays. Diameter is 106 mm. To be completed with additional holder ring and bar. Corrective filters Interference filters on flat glass to vary the colour temperature of the light. Diameter is 106 mm. To be completed with additional holder ring and bar. Green Blue Yellow Magenta UV Stop Sun Sunset Polar Diffusive filter - Blade of light filter Refractive filter on flat glass. Wired diffusive filter to soften the luminous effect; ribbed blade filter to ovalize the beam. Diameter is 106 mm. To be completed with additional holder ring and bar. Diffusive Blade of light Holder ring Painted die-cast aluminium ring. To be completed with chrome bar for ring installation. Aluminium White T1738 2,2 HIT-CE OPTIC SUPPLY COLOUR CODE G12 35W SP electronic Aluminium TS 585 1T1422 Holder ring s bar Chromed aluminium bar to fasten the rings. Polished chrome 1T W FL electronic Aluminium TS 586 1T W MWFL electronic Aluminium TS W WFL electronic Aluminium TS W SP electronic White TS 585 1T2555 1T1424 1T1413 Anti-glare grid Honey comb structure made of black painted metal complete with holder ring. To be completed with holder ring s bar. Aluminium White T W FL electronic White TS W MWFL electronic White TS W WFL electronic White TS 588 1T1414 1T2552 1T1415 Barn doors flaps Adjustable barn door flaps made of metal painted black complete with holder ring. To be completed with holder ring s bar. Aluminium White 1T0298 1T W SP electronic Aluminium TS W FL electronic Aluminium TS W MWFL electronic Aluminium TS W WFL electronic Aluminium TS 588 1T1425 1T1426 1T2556 1T1427 Asymmetric screen Painted metal, asymmetric screen can be adjusted up to 180 complete with holder ring. An asymmetric effect is obtained when combined with FL and WFL optics. To be completed with holder ring s bar. Aluminium White T W SP electronic White TS 585 1T W FL electronic White TS 586 1T W MWFL electronic White TS 587 1T W WFL electronic White TS 588 1T W SP electronic Aluminium TS 585 1T W FL electronic Aluminium TS 586 1T W MWFL electronic Aluminium TS 587 1T W WFL electronic Aluminium TS 588 1T W SP electronic White TS 585 1T W FL electronic White TS 586 1T W MWFL electronic White TS 587 1T W WFL electronic White TS 588 1T PROJECTORS PROJECTORS 243

124 EUROSTANDARD 230V TRACK Electrified track in extruded aluminium, epoxy powder paint finished. Rectangular section with asymmetric profile for the correct connection of modules. Four conductors in copper 4 mm2 (three phases and one neutral max 16A), insulated in PVC. Earth conductor 4 mm2 incorporated in the extrusion. Separate switching possible for three circuits. Available in the recessed version with lateral fins for ceiling mounting. To be used with projectors equipped with Eurostandard adapters. Maximum charge 3.6kW for each feeding unit. MODULES L 1000 mm L 2000 mm L 3000 mm White N ,8 N ,8 N ,7 STANDARD Black N ,8 N ,8 N ,7 Aluminium N ,8 N ,8 N ,7 White N ,9 N ,8 N ,7 RECESSED Black N ,9 N ,8 N ,7 Aluminium N ,9 N ,8 N ,7 COVER PROFILE White N55011 IP40 White N55023 DEAD END Black N55123 Magasin Rossignol - Centre Commercial Clayes Sous Bois - Project: Naço Architectures. Photographer: Jordane BODIN DALI dimmable EUROSTANDARD tracks available upon request. 244 PROJECTORS PROJECTORS 245

125 EUROSTANDARD 230V TRACK CONNECTORS SUPPLIES STRAIGHT White Black N55024 N55124 L CONNECTOR External Can be used as power supply. White sx Black sx N55043A N55143A LATERAL Left live end White Black N55022A N55122A White N55020 CENTRAL CURVE Can be used as power supply. White Black N55040 N55140 L CONNECTOR Internal Can be used as power supply. White dx Black dx N55043B N55143B LATERAL Right live end White Black N55022B N55122B Black N55120 T CONNECTOR External Can be used as power supply. T CONNECTOR Internal Can be used as power supply. White dx Black dx White sx Black sx White sx Black sx White dx Black dx N55042A N55142A N55042C N55142C N55042B N55142B N55042D N55142D X CONNECTOR External Can be used as power supply. White Black N55044 N55144 ADAPTER FOR SUSPENSION Adapter for track mounting of suspension luminaires with steel cable. White Black 1T2505 1T2506 ADAPTER White FOR SUPPLY Allows the power supply from Eurostandard track. Black N55021 N55121 MOUNTING SYSTEMS SUSPENSION Steel suspension cable. Max load 20Kg. To be completed with dedicated suspension bracket. White Black N55037 N55137 CEILING MOUNTING BRACKET White Black Aluminium N55027 N55127 N55227 CIRCUITS Eurostandard can separately combine up to 3 circuits for a maximum of 16A. The three circuits can be combined thanks to the integrated selector on the adapter. The mechanical carrying capacity of the track is 5kg or 0.5kg every 200 mm of length, in the event that the maximum distance between one suspension point and another is, respectively, 1000 mm or 2000 mm. SUSPENSION BRACKET Max load 20kg. White Black N55039 N55139 TOOL Tool for bending conductors, to be used if it s necessary to cut the track during the installation. N55015 RIGID SUPPORT BRACKET White Aluminium N55082 N STRAIGHT COUPLER FOR STABILITY For projectors with Euro standard joints White Black Aluminum 1T4204 1T4263 1T4200 The lateral positioning of the earth line renders the structure of the track asymmetrical; this makes line connection easier, but particular attention should be paid to the choice of connectors, all available in either right or left versions, according to the position of the earth contact. The following diagrams show some possible configurations with the relevant codes. 246 PROJECTORS PROJECTORS 247

126 architectural CEILING and SUSPENSION

127 CCTLed TUBE SUSPENSION, CEILING AND WALL MOUNTED V2L2 MiILESTONE - Vienna, Austrai. Project: Weichenberger ONE PLATFORM, INFINITE SOLUTIONS The option of selecting between the different forms of installation: ceiling, suspension, wall and track together with the different power and optic solutions, allows for use of the same fixture within an entire project, particularly when combined with the recessed CCTLed versions: a uniform quality effect with different installation solutions. CCTLed Tube Diameter Ø 180mm height H. 250mm SMART, TECH, FEEL versions H. 291mm DEEP version Mounting Suspension, Wall mounted, Ceiling, Track Fixture s luminous flux 22W > 2200lm 32W > 2700lm (3000K) Color temperature 3000K, 4000K Optics Smart, Tech, Feel, Deep FOUR OPTIC SOLUTIONS The optic solutions are the same as in the recessed downlight version: SMART, TECH, FEEL and the DEEP high performing version - optic solutions for the most different environments, from retail and hospitality to offices, with the DEEP optic for heights heights up to 12 meters. 250 ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 251

128 CCTLed TUBE A PROFESSIONAL PROGRAM CCTLed TUBE is the solution for surface installations. Two power options, two colour temperatures, four optic solutions (SMART, TECH, FEEL and DEEP), each available in different power source and installation options. This is the CCTLed TUBE program which combines perfectly with the recessed CCTLed versions. For more details on optics, see pag. 18 QUALITY DETAILS Small details which tell of the attention and care taken in the design of a quality product. Following the current interior design trends, the aluminum body is lacquered in a plaster white finish. The ring included has a squared off profile but can easily be substituted with other rounded accessory rings. The TECH version, for example, can be completed with the extra large ring for a decidedly smooth finish, the space between body and ring lightening the overall look. 252 ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 253

129 CCTLed TUBE PROGRAM SMART Ceiling-mounted, pendant, wall-mounted or trackmounted luminaire for high output sources. Plaster-white painted aluminium body. Plaster-white painted polycarbonate decorative squared ring. Black painted die-cast aluminium internal frame and heat sink. Warm white (3000K) or neutral white (4000K) high output. Ra84; Ra97 on request. Precision flood optic available in faceted version with high reflectance mirror finish or smooth with high reflectance matt finish. Polycarbonate micro-prismatic refractor. Luminaire suitable for installation in workplaces (UGR<22). To be completed with mounting system for for wall, ceiling, suspended or track-mounted installations. Passive heath dissipation system. Driver integrated in luminaire body, available in versions: basic electronic, DALI dimmable, basic emergency and DALI emergency. Emergency versions equipped with 3 hour battery pack. OPTICS SUPPLY COLOR WEIGHT CODE 22W 22W 22W 22W 22W 22W 22W 22W 22W 22W 22W 22W facetted facetted matt matt facetted facetted matt matt facetted facetted matt matt electronic electronic electronic electronic dimmable DALI dimmable DALI dimmable DALI dimmable DALI electr. with emergency electr. with emergency electr. with emergency electr. with emergency 3000K 4000K 3000K 4000K 3000K 4000K 3000K 4000K 3000K 4000K 3000K 4000K 2,0 Kg 2,0 Kg 2,0 Kg 2,0 Kg 2,0 Kg 2,0 Kg 2,0 Kg 2,0 Kg 2,5 Kg 2,5 Kg 2,5 Kg 2,5 Kg TS 658 TS 658 TS 657 TS 657 TS 658 TS 658 TS 657 TS 657 TS 658 TS 658 TS 657 TS 657 1T3162 1T3163 1T3164 1T3165 1T3182 1T3183 1T3184 1T3185 1T3202 1T3203 1T3204 1T W facetted dimm. DALI with emerg. 3000K 2,5 Kg TS 658 1T W facetted dimm. DALI with emerg. 4000K 2,5 Kg TS 658 1T W matt dimm. DALI with emerg. 3000K 2,5 Kg TS 657 1T W matt dimm. DALI with emerg. 4000K 2,5 Kg TS 657 1T W facetted electronic 3000K 2,0 Kg TS 653 1T W facetted electronic 4000K 2,0 Kg TS 653 1T W matt electronic 3000K 2,0 Kg TS 654 1T W matt electronic 4000K 2,0 Kg TS 654 1T W facetted dimmable DALI 3000K 2,0 Kg TS 653 1T W facetted dimmable DALI 4000K 2,0 Kg TS 653 1T W matt dimmable DALI 3000K 2,0 Kg TS 654 1T W matt dimmable DALI 4000K 2,0 Kg TS 654 1T W facetted electr. with emergency 3000K 2,5 Kg TS 653 1T W facetted electr. with emergency 4000K 2,5 Kg TS 653 1T W matt electr. with emergency 3000K 2,5 Kg TS 654 1T W matt electr. with emergency 4000K 2,5 Kg TS 654 1T3217 TS ,6W KELVIN 3000K 4000K 2431 lm 2503 lm 2061 lm 2123 lm TS ,6W KELVIN 3000K 4000K 2431 lm 2503 lm 2096 lm 2159 lm 32W facetted dimm. DALI with emerg. 3000K 2,5 Kg TS W facetted dimm. DALI with emerg. 4000K 2,5 Kg TS W matt dimm. DALI with emerg. 3000K 2,5 Kg TS W matt dimm. DALI with emerg. 4000K 2,5 Kg TS 654 1T3234 1T3235 1T3236 1T3237 Imax 691 cd/klm 72 EFFICACY 80 lm/w 83 lm/w IMAX 1680 cd 1730 cd Imax 596 cd/klm 82 EFFICACY 82 lm/w 84 lm/w IMAX 1450 cd 1494 cd All lighting fixtures have to be completed with mounting system, see page 262 TS W TS W KELVIN 3000K 4000K KELVIN 3000K 4000K lm 3304 lm 2720 lm 2802 lm lm 3304 lm 2766 lm 2849 lm Accessries See page 262 Imax 691 cd/klm 72 EFFICACY 76 lm/w 78 lm/w IMAX 2216 cd 2283 cd Imax 596 cd/klm 82 EFFICACY 77 lm/w 79 lm/w IMAX 1913 cd 1971 cd The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 255

130 CCTLed TUBE PROGRAM TECH Ceiling-mounted, pendant, wall-mounted or trackmounted luminaire for high output lamps. Plaster-white painted aluminium body. Plaster-white painted polycarbonate decorative squared ring. Black painted die-cast aluminium internal frame and heat sink. Warm white (3000K) or neutral white (4000K) high output. Ra84; Ra97 on request. Optical system made up of a double reflector: primary reflector low luminance, faceted with high reflectance mirror finish and diffusing matt outer treatment; secondary reflector with mirror or matt finish for a decorative lighting effect. Polycarbonate micro-prism refractor. Luminaire suitable for installation in workplaces where video terminals are used, in conformity with EN12464 (UGR<19). To be completed with mounting system for for wall, ceiling, suspended or trackmounted installations. Passive heat dissipation system. Driver integrated in luminaire body, available in versions: basic electronic, DALI dimmable, basic emergency and DALI emergency. Emergency versions equipped with 3hour battery pack. OPTICS SUPPLY COLOR WEIGHT CODE 22W 22W 22W 22W 22W 22W 22W 22W 22W 22W 22W 22W 22W facetted facetted matt matt facetted facetted matt matt facetted facetted matt matt facetted electronic electronic electronic electronic dimmable DALI dimmable DALI dimmable DALI dimmable DALI electr. with emergency electr. with emergency electr. with emergency electr. with emergency dimm. DALI with emerg. 3000K 4000K 3000K 4000K 3000K 4000K 3000K 4000K 3000K 4000K 3000K 4000K 3000K 2,0 Kg 2,0 Kg 2,0 Kg 2,0 Kg 2,0 Kg 2,0 Kg 2,0 Kg 2,0 Kg 2,5 Kg 2,5 Kg 2,5 Kg 2,5 Kg 2,5 Kg TS 660 TS 660 TS 659 TS 659 TS 660 TS 660 TS 659 TS 659 TS 660 TS 660 TS 659 TS 659 TS 660 1T3166 1T3167 1T3168 1T3169 1T3186 1T3187 1T3188 1T3189 1T3206 1T3207 1T3208 1T3209 1T W facetted dimm. DALI with emerg. 4000K 2,5 Kg TS 660 1T W matt dimm. DALI with emerg. 3000K 2,5 Kg TS 659 1T W matt dimm. DALI with emerg. 4000K 2,5 Kg TS 659 1T W facetted electronic 3000K 2,0 Kg TS 655 1T W facetted electronic 4000K 2,0 Kg TS 655 1T W matt electronic 3000K 2,0 Kg TS 656 1T W matt electronic 4000K 2,0 Kg TS 656 1T W facetted dimmable DALI 3000K 2,0 Kg TS 655 1T W facetted dimmable DALI 4000K 2,0 Kg TS 655 1T W matt dimmable DALI 3000K 2,0 Kg TS 656 1T W matt dimmable DALI 4000K 2,0 Kg TS 656 1T W facetted electr. with emergency 3000K 2,5 Kg TS 655 1T W facetted electr. with emergency 4000K 2,5 Kg TS 655 1T W matt electr. with emergency 3000K 2,5 Kg TS 656 1T W matt electr. with emergency 4000K 2,5 Kg TS 656 1T3221 TS ,6W KELVIN 3000K 4000K 2431 lm 2503 lm 1977 lm 2056 lm TS ,6W KELVIN 3000K 4000K 2431 lm 2503 lm 1997 lm 2056 lm 32W facetted dimm. DALI with emerg. 3000K 2,5 Kg TS W facetted dimm. DALI with emerg. 4000K 2,5 Kg TS W matt dimm. DALI with emerg. 3000K 2,5 Kg TS W matt dimm. DALI with emerg. 4000K 2,5 Kg TS 656 1T3238 1T3239 1T3240 1T3241 Imax 733 cd/klm 69 EFFICACY 78 lm/w 80 lm/w IMAX 1783 cd 1836 cd Imax 721 cd/klm 70 EFFICACY 78 lm/w 80 lm/w IMAX 1753 cd 1806 cd All lighting fixtures have to be completed with mounting system, see page 262 TS W TS W KELVIN 3000K 4000K KELVIN 3000K 4000K lm 3304 lm 2636 lm 2715 lm lm 3304 lm 2635 lm 2714 lm Accessries See page 262 Imax 733 cd/klm 69 EFFICACY 73 lm/w 75 lm/w IMAX 2352 cd 2422 cd Imax 721 cd/klm 70 EFFICACY 73 lm/w 75 lm/w IMAX 2313 cd 2382 cd The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 257

131 CCTLed TUBE PROGRAM FEEL Ceiling-mounted, pendant, wall-mounted or trackmounted luminaire for high output lamps. Plaster-white painted aluminium body. Plaster-white painted polycarbonate decorative squared ring. Black painted die-cast aluminium internal frame and heat sink. Warm white (3000K) or neutral white (4000K) high output. Ra84; Ra97 on request Optical system consists of flood reflector available in faceted high reflectance mirror finish or high reflectance matt finish version, microprismatic refractor and a metallised parabolic cusp complete with shielding plate for a totally indirect light emission. Luminaire suitable for installation in workplaces where Display Screen Equipment is used, in conformity with EN (UGR<19). To be completed with mounting system for for wall, ceiling, suspended or trackmounted installations. Passive heat dissipation system. Driver integrated in luminaire body, available in versions: basic electronic, DALI dimmable, basic emergency and DALI emergency. Emergency versions equipped with 3 hour battery pack. OPTICS SUPPLY COLOR WEIGHT CODE 25W 25W 25W 25W 25W 25W 25W 25W 25W 25W 25W 25W 25W facetted facetted matt matt facetted facetted matt matt facetted facetted matt matt facetted electronic electronic electronic electronic dimmable DALI dimmable DALI dimmable DALI dimmable DALI electr. with emergency electr. with emergency electr. with emergency electr. with emergency dimm. DALI with emerg. 3000K 4000K 3000K 4000K 3000K 4000K 3000K 4000K 3000K 4000K 3000K 4000K 3000K 2,0 Kg 2,0 Kg 2,0 Kg 2,0 Kg 2,0 Kg 2,0 Kg 2,0 Kg 2,0 Kg 2,5 Kg 2,5 Kg 2,5 Kg 2,5 Kg 2,5 Kg TS 662 TS 662 TS 663 TS 663 TS 662 TS 662 TS 663 TS 663 TS 662 TS 662 TS 663 TS 663 TS 662 1T3170 1T3171 1T3172 1T3173 1T3190 1T3191 1T3192 1T3193 1T3210 1T3211 1T3212 1T3213 1T W facetted dimm. DALI with emerg. 4000K 2,5 Kg TS W matt dimm. DALI with emerg. 3000K 2,5 Kg TS W matt dimm. DALI with emerg. 4000K 2,5 Kg TS 663 1T3231 1T3232 1T3233 All lighting fixtures have to be completed with mounting system, see page 262 Accessries See page 262 TS ,2W TS ,2W KELVIN 3000K 4000K KELVIN 3000K 4000K lm 2672 lm 1627 lm 1676 lm lm 2672 lm 1450 lm 1493 lm Imax 501 cd/klm 73 EFFICACY 58 lm/w 59 lm/w IMAX 1301 cd 1340 cd Imax 415 cd/klm 70 EFFICACY 51 lm/w 53 lm/w IMAX 1076 cd 1108 cd The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 259

132 CCTLed TUBE PROGRAM DEEP High performance luminaire for ceiling-mounting, pendant-style suspension, wall-mounting or track-mounting for high output lamps. Plasterwhite painted aluminium body. Plaster-white painted polycarbonate decorative squared ring. Die-cast aluminium internal frame and heat sink. Warm white (3000K) or neutral white (4000K) high output. Ra84; Ra97 on request. Optical system consists of lower reflector made of polished metallized polycarbonate and precision very low luminance optic with convex facets and high reflectance mirror finish made of metallized polycarbonate with Scratch Proof Formula treatment available in Spot and Flood versions. (UGR<19). To be completed with mounting system for for wall, ceiling, suspended or track-mounted installations. Passive heat dissipation system. Driver integrated in luminaire body, available in versions: basic electronic, DALI dimmable, basic emergency and DALI emergency. Emergency versions equipped with 3 hour battery pack. OPTICS SUPPLY COLOR WEIGHT CODE 32W 32W 32W 32W 32W 32W 32W 32W 32W 32W 32W 32W 32W SP SP FL FL SP SP FL FL SP SP FL FL SP electronic electronic electronic electronic dimmable DALI dimmable DALI dimmable DALI dimmable DALI electr. with emergency electr. with emergency electr. with emergency electr. with emergency dimm. DALI with emerg. 3000K 4000K 3000K 4000K 3000K 4000K 3000K 4000K 3000K 4000K 3000K 4000K 3000K 2,1 Kg 2,1 Kg 2,1 Kg 2,1 Kg 2,1 Kg 2,1 Kg 2,1 Kg 2,1 Kg 2,6 Kg 2,6 Kg 2,6 Kg 2,6 Kg 2,6 Kg TS 708 TS 708 TS 709 TS 709 TS 708 TS 708 TS 709 TS 709 TS 708 TS 708 TS 709 TS 709 TS 708 1T3433 1T3434 1T3435 1T3436 1T3437 1T3438 1T3439 1T3440 1T3441 1T3442 1T3443 1T3444 1T W SP dimm. DALI with emerg. 4000K 2,6 Kg TS W FL dimm. DALI with emerg. 3000K 2,6 Kg TS W FL dimm. DALI with emerg. 4000K 2,6 Kg TS 709 1T3446 1T3447 1T3448 All lighting fixtures have to be completed with mounting system, see page 262 Accessries See page 262 TS W TS W KELVIN 3000K 4000K KELVIN 3000K 4000K lm 3296 lm 2542 lm 2618 lm lm 3296 lm 2485 lm 2559 lm Imax 6330 cd/klm 19 EFFICACY 71 lm/w 73 lm/w IMAX cd cd Imax 2537 cd/klm 33 EFFICACY 69 lm/w 71 lm/w IMAX 8119 cd 8363 cd The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 261

133 CCTLed TUBE Mounting systems Rings Eurostandard track kit. 1T0130 Eurostandard kit Rounded ring Plaster white 1T3248 Eurostandard track kit suspension. 1T3242 Ceiling mounting kit electr./electr. emergency dimm. DALI Dali emergency 1T0123 1T0123DA 1T3243 Squared ring with microprismatic diffusive screen Plaster white 1T3249 electr./electr. emergency 1T0124 Suspension kit L max 1000 mm dimm. DALI 1T0124DA Squared ring with silk screen printed Plaster white 1T3250 Dali emergency 1T3244 Double suspension kit L max 2000 mm electr./electr. emergency dimm. DALI Dali emergency 1T3245 1T3246 1T3247 XL ring For versions TECH and DEEP Plaster white 1T3251 electr./electr. emergency 1T3449 Wall mounting kit dimm. DALI 1T3450 Dali emergency 1T3451 electronic/electronic with emergency 1T3452 Wall mounting kit for double emission dimm. DALI 1T3453 Dali emergency 1T ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 263

134 DESE SUSPENSION, CEILING AND WALL MOUNTED FOR COMPACT FLUORESCENT AND METAL HALIDE LAMPS UNIQUE DESIGN, WIDE SELECTION A unique design for multiple architectural solutions, thanks to a wide range of available light sources and various installation possibilities. Each fixture can be combined with different installation systems: ceiling-mounted, suspended, wall-mounted and track mounted, distinguishing each space with its clean design and transparent ring, which becomes illuminated together with the lamp. VARIOUS EFFECTS Different professional optics according to different light sources; each version has a recessed lamp with an internal black ring for glare control. Florence Airport - Florence, Italy 264 ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 265

135 DESE TC-TEL SUPPLY COLOUR WEIGHT CODE Ceiling, suspended, wall or track mounted fixture for compact fluorescent and metal halide lamps. Painted aluminium body and bayonet connection end collar made of polycarbonate with an anti-glare black internal section. Transparent polycarbonate ring that can be replaced with coloured rings available as accessories. Aluminium precision optics with different profiles and finishes depending on the type of source. To be completed with wall. Ceiling, suspension or track mounting systems. Integrated magnetic power factor corrected, electronic, DALI dimmable or permanent emergency power supply. GX24q-3 26/32W electronic aluminium 3,1 Kg TS /32W dimmable DALI aluminium 3,1 Kg TS /32W emergency aluminium 3,6 Kg TS /32W electronic white 3,1 Kg TS /32W dimmable DALI white 3,1 Kg TS /32W emergency white 3,6 Kg TS 290 GX24q-5 57W electronic aluminium 3,1 Kg TS W emergency aluminium 3,6 Kg TS W electronic white 3,1 Kg TS W emergency white 3,6 Kg TS 290 1T0145 1T0145DA 1T0146 1T0141 1T0141DA 1T0142 1T0151 1T0152 1T0147 1T0148 To be completed with mounting system. The degree of protection reaches IP40 with the protection glass IP40 HIT-DE SUPPLY COLOUR WEIGHT CODE RX7s 70W magnetic aluminium 4,9 Kg TS W magnetic white 4,9 Kg TS W magnetic aluminium 5,2 Kg TS W magnetic white 5,2 Kg TS 223 1T0137 1T0135 1T0140 1T0138 To be completed with mounting system. Complete with magnetic ballast inserted in the fixture s body. Accessories See page ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 267

136 DESE ACCESSORIES MOUNTING SYSTEMS ACCESSORIES 0,8 Eurostandard track kit white black 1T0130 1T0131 Polycarbonate bezels. Ø 200 mm transparent Y ,8 Ceiling mounting kit 1T0123 Ceiling mounting kit UV Stop filter Y00029 Ceiling mounting DALI kit 1T0123DA 0,8 Suspension kit L max 1000 mm white white DALI aluminium 1T0124 1T0124DA 1T0126 IP40 Safety glass for TC-TEL Y00032 aluminium DALI 1T0126DA 0,8 Double suspension kit L max 2000 mm white white DALI aluminium 1T2076 1T2076DA 1T2078 aluminium DALI 1T2078DA 0,8 Wall mounting kit white white DALI aluminium 1T0127 1T0127DA 1T0129 aluminium DALI 1T0129DA 268 ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 269

137 MINIDESE SUSPENSION, CEILING AND WALL MOUNTED FOR COMPACT FLUORESCENT AND METAL HALIDE LAMPS MULTIPLE APPLICATIONS The same application possibilities as the DESE range, but with reduced dimensions. The optical body, together with the various professional optics and installation systems, makes of MINIDESE a fixture which is capable of satisfying every design and application requirement. The MINIDESE s bayonet front ring allows for the lamp to be installed and replaced with extreme ease, with no need for tools. CUSTOM OPTICS Four different professional interchangeable optics in highly-reflective pure aluminium: Spot, Flood, Wide Flood and Very Wide Flood, with differentiated geometries based on the beam angle; the Spot and Flood versions are equipped with anti-glare spill rings in order to guarantee maximum visual comfort. SP FL WFL VWFL Hermitage Museum Repository - St Petersburg, Russia Project: Trofimov Studio 270 ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 271

138 MINIDESE Ceiling, suspended, wall or track mounted fixture for compact fluorescent and metal halide. Metal painted body. Integrated elettronic power supply. The metal halide version must be completed with additional optics with anti-glare black ryton ring with bayonet connection completed. 3,1 HIT-CE COLOUR SUPPLY CODE G12 35W 35W 35W aluminium white black electronic electronic electronic 1T2115 1T2113 1T W aluminium electronic 70W white electronic 70W black electronic 1T2118 1T2116 1T2117 To be completed with mounting system. OPTICS SP TS 379 FL TS 474 WFL TS 381 VWFL TS 336 CODE 1T1966 1T1967 1T1968 1T1969 1,0 TC-TEL COLOUR SUPPLY OPTICS CODE GX24q-3 26W aluminium electronic VWFL TS W white electronic VWFL TS W black electronic VWFL TS 290 1T2121 1T2119 1T2120 To be completed with mounting system. Accessories See page ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 273

139 MINIDESE ACCESSORIES MOUNTING SYSTEMS FILTERS FOR HIT-CE LAMPS 0,6 white 1T2132 Red 1T1700 Eurostandard track kit black 1T2133 Green 1T1701 0,4 aluminium 1T2134 Chromatics and UV Stop Blue Yellow 1T1702 1T1703 Ceiling mounting kit 1T2131 Magenta 1T1704 UV Stop 1T1698 0,6 Suspension kit L max 2000 mm white black 1T2125 1T2126 Correctives Sun Sunset 1T1705 1T1706 aluminium 1T2127 Polar 1T1707 1,0 Double suspension kit L max 2000 mm white aluminium aluminium DALI 1T2128 1T2129 1T2130 Refractives blade of light diffusive 1T1696 1T1697 0,8 white 1T2122 Wall mounting kit aluminium 1T aluminium DALI 1T ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 275

140 BeBOP BeBOP SUSPENSION AND CEILING MOUNTED FOR DIRECT LIGHT pendant and ceiling mounted for direct diffuse lighting. Plaster-white painted aluminium body. Plasterwhite painted polycarbonate front element. Die-cast aluminium finned heat sink. Optical system consists of extremely high reflectance aluminium upper reflector with optimised light beam control for high output source. Ra84; Ra97 on request. Complete with 2000 mm long steel suspension cable with micrometric adjustment system. Electronic driver built into the luminaire body. White power cable complete with coordinated canopy. CEILING MOUNTED 1,3 SUPPLY COLOR CODE 12W electronic 350mA 2700K TS W electronic 350mA 3000K TS W electronic 350mA 4000K TS 744 1T3640 1T3641 1T3642 SUSPENSION SUPPLY COLOR CODE 12W electronic 350mA 2700K TS W electronic 350mA 3000K TS W electronic 350mA 4000K TS 744 1T3544 1T3545 1T3546 The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site TS W KELVIN 2700K 3000K 4000K lm 1378 lm 1419 lm 1166 lm 1247 lm 1285 lm 90% Imax 1389 cd/klm 49 EFFICACY 78 lm/w 83 lm/w 86 lm/w IMAX 1790 cd 1914 cd 1972 cd 276 ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 277

141 CCTLed PENDANT SUSPENSION FOR DIFFUSED AND DIRECT LIGHT, FOR SOURCES SUSPENDING CCTLed PENDANT is the new suspension fixture in the CCTLed family, which with its performance features and method of installation further expands the range. Indeed, originality as well as the dissipation system s design, which are features of this range, are finally put on show, becoming the recognisable element of the new suspension. In addition, two different optic systems, designed ad hoc for sources, and a large reflector are available in the transparent or metallized version. CCTLed Pendant Diameter Ø 317mm height H. 279mm all versions Reflector Transparent, Metallized Fixture s luminous flux Transparent refl. 22W > 1400lm - 32W > 1900lm Metallized refl. 22W > 2000lm - 32W > 2600lm Color temperature 3000K, 4000K Optics OFFICE, AMBIENT

142 CCTLed PENDANT DIFFUSED EFFECT The main external reflector reflector is the element that visibly distinguishes the two CCTLed PENDANT versions. In fact the optic system is provided by a set of all the different elements. Besides the outer transparent reflector, a special internal transparent TECH optic (the same used in the downlight program) equipped with a microprismatic screen that shields the, is the heart of the system. The set of all the elements creates a direct and diffused light, with no loss of performance. TECHNICAL SUSPENSION WITH UGR<19 The metallized reflector suspension is the high tech solution equipped with an OFFICE optic with UGR<19. PASSIVE DISSIPATION An excellent heat management guarantees maintained long-term performance PASSIVE DISSIPATION An excellent heat management guarantees maintained long-term performances microprismatic dome refractor DOME Screens the source and softly distributes the light OPTICS OFFICE or ARCHITECTURAL optics for professional results OPTICS Transparent facetted optics OPTIC CAMERA The special element allows for the different optics and accessories to be installedaccessories to be installed REFLECTOR Transparent reflector for a diffused light effect REFLECTOR Metallized reflector for a direct light effect 280 ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 281

143 CCTLed PENDANT PROGRAM TRANSPARENT REFLECTOR Suspension with diffused downlight for high output lamps. Black painted metal frame and black painted die-cast aluminium heat sink. Transparent polycarbonate outer prismatic diffuser. Warm white (3000K) or neutral white (4000K) high output. Ra84; Ra97 on request. Equipped with transparent polycarbonate faceted inner optic and microprismatic dome refractor optic mm long steel suspension cables with micrometric adjustment system Auto Block-System ABS. Built-in driver on the ceiling canopy: basic electronic, DALI dimmable, basic emergency and DALI emergency. Emergency versions equipped with 3 hour battery pack integrated in secondary canopy. AMBIENT SUPPLY COLOR WEIGHT CODE 22W electronic 3000K 2,0 Kg TS T W electronic 4000K 2,0 Kg TS T W dimmable DALI 3000K 2,0 Kg TS T W dimmable DALI 4000K 2,0 Kg TS T W electronic with emergency 3000K 2,7 Kg TS T W electronic with emergency 4000K 2,7 Kg TS T W dimmable DALI with emergency 3000K 2,7 Kg TS T W dimmable DALI with emergency 4000K 2,7 Kg TS W electronic 3000K 2,0 Kg TS W electronic 4000K 2,0 Kg TS W dimmable DALI 3000K 2,0 Kg TS W dimmable DALI 4000K 2,0 Kg TS W electronic with emergency 3000K 2,7 Kg TS W electronic with emergency 4000K 2,7 Kg TS W dimmable DALI with emergency 3000K 2,7 Kg TS W dimmable DALI with emergency 4000K 2,7 Kg TS T3347 1T3272 1T3273 1T3296 1T3297 1T3320 1T3321 1T3344 1T3345 ACCESSORIES Cover Dissipator cover Black White 1T4061 1T4062 TS W TS ,6W KELVIN 3000K 4000K KELVIN 3000K 4000K lm 3277 lm lm 2405 lm 1920 lm 1978 lm 1409 lm 1451 lm cd/1000lm α = 39 Imax 1000 cd/klm EFFICACY 53 lm/w 55 lm/w IMAX 3182 cd 3278 cd cd/1000lm α = 39 Imax 1000 cd/klm EFFICACY 55 lm/w 57 lm/w IMAX 2335 cd 2405 cd The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 283

144 CCTLed PENDANT PROGRAM Metallized reflector Suspension for high output lamps. Black painted metal frame and black painted die-cast aluminium heat sink. Metallized methacrylate prismatic outer diffuser. Warm white (3000K) or neutral white (4000K) high output. Ra84; Ra97 on request. Equipped with inner precision optics with convex facets made of metallized polycarbonate with Scratch Proof Formula treatment and high reflectance mirror finish available in Office version with UGR<19 or architectural Spot, Flood, Medium Wide Flood and Wide Flood versions mm long steel suspension cables with micrometric adjustment system Auto Block-System ABS. Built-in driver on the ceiling canopy: basic electronic, DALI dimmable, basic emergency and DALI emergency. Emergency versions equipped with 3 hour battery pack integrated in secondary canopy. OFFICE SUPPLY COLOR WEIGHT CODE 22W 22W 22W 22W 22W 22W 22W 22W 32W electronic electronic dimmable DALI dimmable DALI electronic with emergency electronic with emergency dimmable DALI with emergency dimmable DALI with emergency electronic 3000K 4000K 3000K 4000K 3000K 4000K 3000K 4000K 3000K 2,0 Kg 2,0 Kg 2,0 Kg 2,0 Kg 2,7 Kg 2,7 Kg 2,7 Kg 2,7 Kg 2,0 Kg TS 720 TS 720 TS 720 TS 720 TS 720 TS 720 TS 720 TS 720 TS 714 1T3294 1T3295 1T3318 1T3319 1T3342 1T3343 1T3366 1T3367 1T W electronic 4000K 2,0 Kg TS W dimmable DALI 3000K 2,0 Kg TS W dimmable DALI 4000K 2,0 Kg TS W electronic with emergency 3000K 2,7 Kg TS W electronic with emergency 4000K 2,7 Kg TS W dimmable DALI with emergency 3000K 2,7 Kg TS W dimmable DALI with emergency 4000K 2,7 Kg TS 714 1T3293 1T3316 1T3317 1T3340 1T3341 1T3364 1T3365 ACCESSORIES Cover Dissipator cover Black White 1T4061 1T4062 TS W TS ,6W KELVIN 3000K 4000K KELVIN 3000K 4000K lm 3304 lm 2636 lm 2715 lm lm 2503 lm 1997 lm 2056 lm cd/1000lm α = 70 Imax 721 cd/klm EFFICACY 73 lm/w 75 lm/w IMAX 2313 cd 2382 cd cd/1000lm α = 70 Imax 721 cd/klm EFFICACY 78 lm/w 80 lm/w IMAX 1753 cd 1805 cd The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 285

145 CCTLed PENDANT MasterChef Italia Studios

146 krono SUSPENSION FOR DIFFUSED AND DIRECT LIGHT, FOR COMPACT FLUORESCENT, AND METAL HALIDE LAMPS DOUBLE EFFECT Double effects thanks to the various finishes of the prismatic reflectors. Metallized for direct light alone and ribbed transparent in order to add the diffused light component; the discharge versions come complete with safety screens in transparent methacrylate, which are also available as an accessory for the fluorescent versions. ADJUSTABLE SUSPENSION With great attention to details, the KRONO fixture makes use of a micrometric adjustment cable suspension system. Complete with an aluminium-coloured polycarbonate canopy predisposed for the passage of the feeding cable. THREE SIZES Abel & Baker - Helsinki, Finland The professional suspension KRONO fixture adapts to any environment, even of large proportions. Three different versions are available, small, medium and large, for use with 32W fluorescent lamps and metal halide lamps up to 400W. 288 ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 289

147 KRONO 6,0 TC-TEL SUPPLY CODE GX24q-4 2x 42W electronic TS Suspension for compact fluorescent and metal halide lamps. Metal housing and painted in aluminium finish and component holder made in extruded anodised aluminium finned for heat dissipation. Prismatic reflector made of metallized methacrylate or transparent polycarbonate. Metal halide versions complete with IP40 protection screen. Steel suspension cables complete with canopy (L 3000mm) with micrometric Auto Block- System ABS. Available with integrated magnetic, electronic, DALI dimmable or permanent emergency power supply. Feeding cable complete with canopy. MEDIUM 2x 42W permanent emergency TS 373 2x 42W dimmable DALI TS 281 REFLECTOR prismatic transparent TS 281 prismatic metallized TS H 34335DA IP40 6,0 HIT-CE SUPPLY CODE MEDIUM G12 150W magnetic power factor correct. REFLECTOR prismatic transparent TS 340 prismatic metallized TS ,5 TC-TEL SUPPLY REFLECTOR CODE IP40 HIE-OF SUPPLY CODE SMALL GX24q-3 2x 32W electronic prismatic transparent TS 281 2x 32W electronic prismatic metallized TS LARGE E40 250W magnetic power factor correct. 9, x 32W dimmable DALI prismatic transparent TS DA REFLECTOR 2x 32W dimmable DALI prismatic metallized TS DA prismatic transparent TS x 32W permanent emerg. prismatic transparent TS H prismatic metallized TS x 32W permanent emerg. prismatic metallized TS H IP40 3,5 HIT-CE SUPPLY REFLECTOR CODE HIE-OF SUPPLY CODE SMALL G12 70W 70W magnetic power factor correct. magnetic power factor correct. prismatic transparent TS 340 prismatic metallized TS E40 400W magnetic power factor correct. 10, REFLECTOR prismatic transparent TS ACCESSORIES IP40 Methacrylate prismatic protective screen for TC-TEL 2x 32W for TC-TEL 2x 42W Ø Ø Ø Ø Ø Ø 290 ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 291

148 ERCOLE SUSPENSION FOR AND COMPACT FLUORESCENT LAMPS PROVIDING DIRECT OR DIRECT/INDIRECT LIGHTING SO LARGE A large suspension fixture the largest version has a diameter of 150 cm for large spaces, capable of illuminating any space in an extremely diffused way. Available in the direct emission version or direct/indirect emission. CONTEMPORARY LIGHTNESS Notwithstanding its size, ERCOLE is extremely light. Body made in a single piece of moulded Baydur polymer and diffuser made of a single sheet of opal polycarbonate diffuser; equipped with high efficiency fluorescent sources. The light is uniformly diffused. Ideal for lighting areas with high ceilings or to give the context an extremely contemporary feel. 292 ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 293

149 ERCOLE ERCOLE SUSPENSION Direct or direct/indirect emission suspension fixtue for lamps. Metal frame, body in matt coloured Baydur polimer and lower diffuser in opaline polycarbonate. Complete with steel suspension cables (L.max 4000mm) with micrometric Zip regulation system on the upper side of the luminaire. Integrated electronic dimmable DALI power supply. Complete with feeding cable (L=5000mm) and canopy. SUSPENSION Direct or direct/indirect emission suspension fixtue for compact fluoescent lamps. Metal frame, body in matt coloured Baydur polimer and lower diffuser in opaline polycarbonate. Direct emission version complete with upper screen in alug-bond, direct/indirect emission version complete with upper screen in opaline polycarbonate. Integrated power supply. Complete with steel suspension cables (L.max 4000mm) with micrometric Zip regulation system on the upper side of the luminaire. DIRECT DIRECT IP40 FINISHING ØDxH WEIGHT CODE IP40 TC-LEL FINISHING ØDxH WEIGHT CODE 140W plaster white 1050x Kg TS 825 1T4205 2G11 10x36W plaster white 1050x Kg ES 126_ B 140W deep black 1050x Kg TS 825 1T x36W deep black 1050x Kg ES 126_ N 330W plaster white 1500x Kg TS 826 1T x55W plaster white 1500x Kg ES 126_ B 330W deep black 1500x Kg TS 826 1T x55W deep black 1500x Kg ES 126_ N min 150 max 4800 DIRECT/INDIRECT min 150 max 4800 DIRECT/INDIRECT H FINISHING ØDxH WEIGHT CODE 173W plaster white 1050x Kg TS 827 1T4209 H TC-LEL FINISHING ØDxH WEIGHT CODE 2G11 10x36W plaster white 1050x Kg ES 126_ B Ø D 173W deep black 1050x Kg TS W plaster white 1500x Kg TS 828 1T4210 1T4211 Ø D 10x36W deep black 1050x Kg ES 126_2 10x55W plaster white 1500x Kg ES 126_ N 42654B 363W deep black 1500x Kg TS 828 1T x55W deep black 1500x Kg ES 126_ N TS ,4W TS W KELVIN 3000K KELVIN 3000K lm lm cd EFFICACY 63 lm/w cd EFFICACY 65 lm/w = 115 Imax 3507 cd IMAX 3507 cd = 115 Imax 3507 cd IMAX 3507 cd TS KELVIN 377W 3000K - TS KELVIN 413,6W 3000K - ES 126_ ES 126_ lm lm cd EFFICACY 56 lm/w cd EFFICACY 58 lm/w cd/1000lm cd/1000lm = 117 Imax 7166 cd IMAX 7166 cd = 117 Imax 7166 cd IMAX 7166 cd TC-LEL 40% Imax 147 cd/klm 108 TC-LEL 63% Imax 166 cd/klm 294 ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 295

150 LITE-BOX design VCA-Vannini Cesaretti Architetti Boxes of light, ceiling-mounted or suspension fixtures for fluorescent lamps. Precise lines, sharp corners, no visible screws and a specially treated lexan diffuser which allows for a totally uniform effect on the surface. Available in the direct/indirect and direct-light only versions. Electronic, dimmable and emergency power supplies guarantee maximum functional flexibility. 296 ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 297

151 LITE-BOX SUSPENSION Direct or direct/indirect emission suspension fixture for fluorescent lamps. Anodised aluminium body. Upper cover made of metal (direct light emission version) or opal lexan (direct/ indirect light emission version). Lower diffuser made of white sandblasted, opal lexan. Steel suspension cables complete with canopy (L 2000mm) with micrometric Auto Block-System ABS. Available with integrated electronic, dimmable electronic 1/10V, DALI and permanent emergency power supply, autonomy 1h. IP40 TC-L EMISSION SUPPLY WEIGHT CODE IP40 T16 EMISSION SUPPLY WEIGHT CODE 2G11 2x 18W direct/indirect electronic 3,6 Kg VI 025 1V7300 G5 2x 54W direct/indirect electronic 5,3 Kg VI 025 1V7091 2x 36W direct electronic 4,7 Kg VI 024 1V7305 2x 54W direct/indirect dimmable DALI 5,3 Kg VI 025 1V7091DA 2x 36W direct dimmable DALI 4,7 Kg VI 024 1V7305DA 3x 54W direct/indirect electronic* 7,0 Kg VI 025 1V7093 4x 36W direct/indirect electronic 5,7 Kg VI 025 1V7302 3x 54W direct/indirect elect. dimmable 1/10V 7,5 Kg VI 025 1V7308 A B H x 18W 2x 36W 4x 36W direct electronic 5,7 Kg VI 024 4x 36W direct dimmable DALI 5,7 Kg VI 024 4x 55W direct/indirect electronic 5,5 Kg VI 025 1V7303 1V7303DA 1V7311 A B H x 54W 3x 54W 3x 54W direct/indirect dimm. Dali with emergency 7,5 Kg VI 025 3x 54W direct electronic* 7,5 Kg VI 024 3x 54W direct elect. dimmable 1/10V 7,5 Kg VI 024 1V7308DA 1V7094 1V x 36W 4x 55W direct/indirect elect. dimmable 1/10V 5,5 Kg VI 025 1V x 39W 3x 54W direct dimm. Dali with emergency 7,5 Kg VI 024 1V7309DA x 55W 4x 55W direct/indirect dimmable DALI 5,5 Kg VI 025 1V7312DA 3x 54W direct emergency** 8,2 Kg VI 024 1V7310 NOTE ** Emergency device for feeding in permanent light. Autonomy 1 h. Restart time less than 0,5 seconds. Complies with European standards for public environments. 3x 39W direct/indirect electronic* 6,3 kg VI 025 3x 39W direct/indirect dimmable DALI 6,3 kg VI 025 3x 39W direct electronic* 6,7 kg VI 024 3x 39W direct elect. dimmable 1/10V 6,5 kg VI 024 3x 39W direct dimmable DALI 6,5 kg VI 024 3x 39W direct emergency** 7,3 kg VI 024 1V7122 1V7122DA 1V7122A 1V7306 1V7306DA 1V7307 NOTE * Two electronic reactors cabled for allowing the single switching of 2 out of 3 lamps. ** Emergency device for feeding in permanent light. Autonomy 1 h. Restart time less than 0,5 seconds. Complies with European standards for public environments. FEEDING AND SUSPENSION CABLES* CODE Bi pole feeding cable Bi pole feeding cable Three pole feeding cable Three pole feeding cable Steel suspension cable length 5000 mm length mm length 5000 mm length mm length mm for versions TC-L and T16 2x for versions TC-L and T16 2x for versions TC-L 4x for versions TC-L 4x 1V7260 1V7261 1V7262 1V7263 1V7264 Steel suspension cables (2000 mm) with micrometric height adjustment. * Accessories to be ordered only for installations higher than 2000 mm. Emergency and dimmable versions excluded. 298 ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 299

152 LITE-BOX WALL/CEILING Wall or ceiling mounted fixture for fluorescent lamps. Anodised aluminium body. Front diffuser made of white sandblasted, opal lexan. Available with integrated electronic, dimmable electronic 1/10V, DALI and permanent emergency power supply, 1h autonomy. IP40 TC-L SUPPLY WEIGHT CODE IP40 T16 SUPPLY WEIGHT CODE 2G11 2x 18W electronic 3,5 Kg VI 024 1V7313 G5 3x 39W electronic 6,7 Kg VI 024 1V7121 B 2x 36W electronic 4,5 Kg VI 024 1V7318 B 3x 39W elect. dimmable 1/10V 6,3 Kg VI 024 1V7320 2x 36W dimmable DALI 4,5 Kg VI 024 1V7318DA 3x 39W dimmable DALI 6,3 Kg VI 024 1V7320DA H A 2x 36W emergency* 4,9 Kg VI 024 1V7319 H A 3x 39W emergency* 7,1 Kg VI 024 1V7321 A B H x 18W 4x 36W electronic 5,5 Kg VI 024 4x 36W dimmable DALI 5,5 Kg VI 024 1V7315 1V7315DA A B H x 39W 3x 54W electronic 7,7 Kg VI 024 3x 54W elect. dimmable 1/10V 7,7 Kg VI 024 1V7092 1V x 36W 4x 55W electronic 5,5 Kg VI 024 1V x 54W 3x 54W dimmable DALI 7,7 Kg VI 024 1V7322DA x 36W 4x 55W elect. dimmable 1/10V 5,5 Kg VI 024 1V7325 3x 54W emergency* 8,4 Kg VI 024 1V x 55W 4x 55W dimmable DALI 5,5 Kg VI 024 4x 55W emergency* 6,5 Kg VI 024 1V7325DA 1V7326 NOTE * Emergency device for feeding in permanent light. Autonomy 1 h. Restart time less than 0,5 seconds. Complies with European standards for public environments. NOTE * Emergency device for feeding in permanent light. Autonomy 1 h. Restart time less than 0,5 seconds. Complies with European standards for public environments. 300 ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 301

153 MINIMA and MINIMINIMA DIRECT/INDIRECT LIGHT SUSPENSION AND CEILING MOUNTED FOR led sources and LINEAR FLUORESCENT LAMPS LINEAR AND SUBTLE A single element, linear and subtle, with a depth of only 5,5 centimetres, obtained by excavating a solid piece of material, with no folds or seams; sharp and precise corners and edges, with no visible coupling or fastening systems. The protective screen is perfectly flush and hides the light sources while diffusing the light perfectly. THE SAME EXTERIOR FOR A HIGHER PERFORMANCE SOLUTION MINIMINIMA has the same exterior but is more powerful thanks to its state of the art modules. Not only minimal design but high performance. 302 ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 303

154 MINIMA CEILING MOUNTED Ceiling fixture with direct light emission for linear fluorescent lamps. Body made of fireproof, painted polymer plastic with opal polycarbonate diffuser. Integrated electronic power supply. IP40 T16 COLOUR AxBxH WEIGHT CODE G5 39W aluminium 900x55x58 mm 1,2 Kg TS W white 900x55x58 mm 1,2 Kg TS W black 900x55x58 mm 1,2 Kg TS W aluminium 1200x55x58 mm 1,6 Kg TS W white 1200x55x58 mm 1,6 Kg TS W black 1200x55x58 mm 1,6 Kg TS T4154 1T T4156 1T4157 MINIMA wall mounted See page ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 305

155 MINIMA SUSPENSION Suspended fixture with direct or direct/indirect light emission for linear fluorescent lamps. Body made of fireproof, painted polymer plastic or chrome version made of chromed aluminium with opal polycarbonate diffuser. Version with direct/indirect light emission complete with upper protection screen. Integrated electronic power supply. DIRECT EMISSION DIRECT/INDIRECT EMISSION IP40 T16 COLOUR AxBxH WEIGHT CODE IP40 T16 COLOUR AxBxH WEIGHT CODE G5 39W chrome 900x38x58 mm 2,8 Kg TS G5 39W aluminium 900x55x58 mm 1,2 Kg TS W white 900x55x58 mm 1,2 Kg TS 574 1T W aluminium 900x55x58 mm 1,2 Kg TS W black 900x55x58 mm 1,2 Kg TS 574 1T W white 900x55x58 mm 1,2 Kg TS 572 1T W aluminium 1200x55x58 mm 1,6 Kg TS W black 900x55x58 mm 1,2 Kg TS 572 1T W white 1200x55x58 mm 1,6 Kg TS 574 1T W aluminium 1200x55x58 mm 1,6 Kg TS W black 1200x55x58 mm 1,6 Kg TS 574 1T W white 1200x55x58 mm 1,6 Kg TS 572 1T W black 1200x55x58 mm 1,6 Kg TS 572 1T4163 Complete with off-center canopy. DIRECT EMISSION DIRECT/INDIRECT EMISSION 306 ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 307

156 MINIMINIMA CEILING MOUNTED SUSPENSION Ceiling fixture with direct light emission for linear fluorescent and s sources. Body made of chromed or painted aluminium with opal polycarbonate diffuser. Integrated electronic power supply. Suspended fixture with direct light emission for linear fluorescent and s sources. Body made of chromed or painted aluminium with opal polycarbonate diffuser. Integrated electronic power supply. IP40 FINISHES COLOR Weight Code IP40 FINISHES COLOR Weight Code 32 12W chrome 3000K 1,2 Kg TS W aluminium 3000K 1,2 Kg TS 748 1T4178 1T W chrome 3000K 1,5 Kg TS W aluminium 3000K 1,5 Kg TS 748 1T4182 1T W white 3000K 1,2 Kg TS 748 1T W white 3000K 1,5 Kg TS 748 1T W black 3000K 1,2 Kg TS 748 1T W black 3000K 1,5 Kg TS 748 1T4185 T16 FINISHES Weight Code T16 FINISHES Weight Code G5 24W chrome 1,2 Kg TS G5 24W chrome 1,6 Kg TS W aluminium 1,2 Kg TS W aluminium 1,6 Kg TS W white 1,2 Kg TS 576 1T W white 1,6 Kg TS 576 1T W black 1,2 Kg TS 576 1T W black 1,6 Kg TS 576 1T4169 MINIMINIMA wall mounted See page 355 TS 576 TS KELVIN 14,7W 3000K 1500 lm 763 lm Imax 189 cd/klm EFFICACY 52 lm/w 308 ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 309

157 Q-BO SUSPENSION AND CEILING MOUNTED FOR HALOGEN AND METAL HALIDE LAMPS THE ESSENTIALITY OF THE FORM A simple and clean form, in harmony with any environment. Two versions entirely made of aluminium: the small one decorative and the large one high-performing, with two application possibilities, ceilingmounted or suspended. The use of the accessory filters allows for the variety of effects to be increased, by shading, colouring or shaping the beam of light. Q-BO wall mounted see page 358 Santa Chiara former Convent - Facoltà di Lettere e Filosofia - Gorizia, Italy Project: Politecnica Ingegneria e Architettura - Florence, Italy 310 ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 311

158 Q-BO CEILING MOUNTED Ceiling mounted fixture with direct light emission for halogen and metal halide lamps. Body made of painted extruded aluminium white or natural finish. Version for discharge lamp, complete with electronic power supply located in the mounting plate. Supplied as standard without screens, which are available as accessories. SUSPENSION Suspended fixture with direct light emission for halogen and metal halide lamps. Body made of painted extruded aluminium white or natural finish. Version for discharge lamp, complete with electronic power supply located in the mounting plate. Supplied as standard without screens, which are available as accessories. SMALL SMALL QT14/c EMISSION COLOUR WEIGHT CODE QT14/c EMISSION COLOUR WEIGHT CODE G9 max 20W direct white 0,2 Kg VI 079 1V7370 G9 max 20W direct white 0,6 Kg VI 079 1V7371 max 20W direct aluminium 0,2 Kg VI 079 1V7173 max 20W direct aluminium 0,6 Kg VI 079 1V7174 LARGE LARGE QT-DE 12 (74,9 mm) EMISSION COLOUR WEIGHT CODE QT-DE 12 (74,9 mm) EMISSION COLOUR WEIGHT CODE R7s max 120W direct white 1,4 Kg VI 081 1V7374 R7s max 120W direct white 1,4 Kg VI 081 1V7375 max 120W direct aluminium 1,4 Kg VI 081 1V7180 max 120W direct aluminium 1,4 Kg VI 081 1V7181 LARGE HIT-Tc-CE EMISSION SUPPLY COLOUR WEIGHT CODE G8.5 35W direct electronic white 1,9 Kg TS 600 1V7569 Complete with steel suspension cable and transparent feeding cable with canopy, length 2000 mm. Micrometric system for regulating distance from the ceiling. 35W direct electronic aluminium 1,9 Kg TS 600 1V7568 Ø FEEDING AND SUSPENSION CABLES* CODE Three pole feeding cable Three pole feeding cable Steel suspension cable length 5000 mm length mm length mm 1V7262 1V7263 1V7264 * Accessories to be ordered only for installations higher than 2000 mm. 312 ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 313

159 Q-BO ACCESSORIES ACCESSORIES IP40 Aluminium frame with sandblasted glass small version large version 1V7332 1V7331 Aluminium plate with central slot for light-blade effect small version large version 1V7177 1V7184 IP40 White frame with sandblasted glass small version large version 1V7361 1V7360 White plate with central slot for light-blade effect small version large version 1V7367 1V ARCHITECTURAL CEILING AND SUSPENSION ARCHITECTURAL CEILING AND SUSPENSION 315

160 TECHNICAL SUSPENSIONS

161 DIVA Its name says everything about how its likes to be the protagonist. Impossible not to notice or admire it. Soft lines, impalpable materials, no joins or screws, only shape and pure light. LIGHT AND MATERIAL DIVA is the new high range suspension lamp for office lighting. It is made of CRISTALPLANT, a technologically advanced and unique composite material that is made up of a high percentage of natural extremely pure polyester polymers and acrylics; it is therefore an inert, hypoallergenic and non-toxic material. DIVA with CRISTALPLANT has soft surfaces without joints that interact freely with the light. LIGHT AS THE FOCUS IN THE OFFICE A clean yet sinuous suspension lamp, DIVA has a pure design that hides professional technology suitable for office lighting that meets all the regulations specified in the EN standard in terms of luminance, colour rendering and glare. Its elegant shape not only makes it a functional tool but a centre stage furnishing. CONTROLLING THE ILLUMINATED SPACE DIVA provides three different lighting effects: direct light, indirect light or direct/indirect light. The direct component is managed by a controlled luminance textured PMMA screen while the indirect component is entrusted to a highly efficient, Lambertian emission COB source. The result is a pleasantly lit space with perfectly balanced luminance. TECHNICAL SUSPENSIONS 319

162 DIVA UGR <19 Stand-alone direct or indirect light suspension lamp fitted with sources. White CRISTALPLANT body. Controlled low luminance direct light EN , UGR<19 and L65<1500/3000 cd/ m² according to the power supply. Optimised uniform indirect light for a minimum suspension height of 1500mm. Fitted with separate switches. Three different light effects available: direct light, indirect light and mixed direct/indirect light. Complete with two steel suspension cables with an Auto Block-System ABS micrometric adjustment system, Can be adjusted vertically by +/-15. Integrated electronic or dimmable DALI power supply. Emergency power unit available as an accessory. Pre-wired with a standard transparent power cable or DALI and white canopy V 50/60Hz 19 FINISHES SUPPLY COLOR Code W CRISTALPLANT electronic 3000K TS 803 1T4522 max W CRISTALPLANT electronic 4000K TS 840 1T W CRISTALPLANT dimmable DALI 3000K TS 803 1T W CRISTALPLANT dimmable DALI 4000K TS 840 1T TS 803 Emergency lighting KELVIN 55,4W 3000K Emergency kit 1T4074 UGR < lm Imax 259 cd/klm EFFICACY 97 lm/w TS KELVIN 55,4W 4000K UGR < lm Imax 263 cd/klm EFFICACY 101 lm/w TECHNICAL SUSPENSIONS 321

163 CARTESIO SCENOGRAPHY CARTESIO is able to create three different effects: direct emission, indirect emission or mixed direct/ indirect emission. The direct component is managed by a textured PMMA screen to control glare while the indirect component is managed by a highly efficient COB source that lights the ceiling with a Lambertian emission to balance the luminance. VISUAL CAPACITY AND QUALITY Light quantiity and quality are the main parameters used to evaluate visual capacity inside the workspace. The EN standard defines these parameters and above all their balance. The rectangular CARTESIO versions, fitted with the direct emission component guarantee more than 500lux on the work surface, in line with the requirements outlined in the standard and have a UGR value of 16 which is considerably lower than the limits indicated in the standard (UGR<19), which ensures reliability and maximum freedom when designing spaces. In addition to this there is the indirect component that contributes to softly balancing the luminance to reduce user eyestrain and improve perception of the illuminated space. The CARTESIO range meets all office technical requirements. From lighting workstations with VDTs as well where the EN standard is more rigorous, to meeting rooms and corridors. Rectangular or square solutions for suspension, ceiling or wall mounted installations. Indirect Direct Direct/Indirect 322 TECHNICAL SUSPENSIONS TECHNICAL SUSPENSIONS 323

164 CARTESIO UGR <19 Direct/indirect light suspension fixture fitted with sources. Extruded aluminium body with aluminium terminals. Plaster white finish. Diffuse indirect emission. Low luminance direct emission (EN , UGR < 19 and L65 < 3000 cd/m²). Pre-set for multiple lighting effects: direct light, indirect light, mixed direct/indirect light. Fitted with two steel suspension cables with an Auto Block-System ABS micrometric regulation. The fixture can be adjusted vertically +/-15. Integrated quick IN/OUT connectors to connect to the power supply. Preset for modular configurations with dedicated optional accessories complete with wiring cable. Integrated electronic or electronic dimmable DALI driver. Emergency unit available as an accessory. To be completed with a standard transparent power cable or DALI complete with plaster white canopy V 50/60Hz 11 FINISHES SUPPLY COLOR Code W plaster white electronic 3000K TS 803 1T W plaster white electronic 4000K TS 840 1T W plaster white dimmable DALI 3000K TS 803 1T W plaster white dimmable DALI 4000K TS 840 1T4069 INSTALLATION 1292 max Installing the CARTESIO range is really simple. The rectangular versions can be installed singularly or in modular configuration. They are fitted with integrated a couple of quick input and output connectors, one on each side, to connect to the power supply and a canopy that must be ordered separately. A range of dedicated optional accessories can be ordered for modular configurations complete with a power cable to connect the suspensions together. The square suspension versions have only one connector to connect to the power cable and a canopy. TS KELVIN 55,4W 3000K Canopy Plaster white Standard 1T4071 Imax 259 cd/klm UGR <19 EFFICACY 5369 lm 97 lm/w Plaster white DALI 1T4072 Emergency lighting TS Imax 263 cd/klm KELVIN 55,4W 4000K UGR <19 EFFICACY 5620 lm 101 lm/w Emergency kit Linear connector Standard DALI 1T4074 1T4075 1T TECHNICAL SUSPENSIONS TECHNICAL SUSPENSIONS 325

165 CARTESIO UGR UGR Direct light suspension fixture fitted with sources. Extruded aluminium body with aluminium terminals. Plaster white finish. Uniform direct emission (UGR<22). Fitted with two steel suspension cables with an Auto Block-System ABS micrometric regulation. The fixture can be adjusted vertically +/-15. Integrated quick input connectors to connect to the power supply. Integrated electronic driver or electronic dimmable DALI. Emergency unit available as an accessory. To be completed with a standard transparent power cable or DALI complete with plaster white canopy V 50/60Hz Direct light suspension fixture fitted with sources. Extruded aluminium body with aluminium terminals. Plaster white finish. Uniform direct emission (UGR<22). Fitted with two steel suspension cables with an Auto Block-System ABS micrometric regulation. The fixture can be adjusted vertically +/-15. Integrated quick input connectors to connect to the power supply. Integrated electronic driver or electronic dimmable DALI. Emergency unit available as an accessory. To be completed with a standard transparent power cable or DALI complete with plaster white canopy V 50/60Hz FINISHES SUPPLY COLOR Code 26W plaster white electronic 3000K TS 843 1T W plaster white electronic 4000K TS 843 1T ,5 FINISHES SUPPLY COLOR Code 26W plaster white electronic 3000K TS 843 1T W plaster white electronic 4000K TS 843 1T W plaster white dimmable DALI 3000K TS 843 1T W plaster white dimmable DALI 4000K TS 843 1T W plaster white dimmable DALI 3000K TS 843 1T W plaster white dimmable DALI 4000K TS 843 1T4248 max TS ,4W KELVIN 3000K 4000K Canopy Plaster white Standard 1T4071 Plaster white DALI 1T4072 TS ,4W KELVIN 3000K 4000K UGR <22 <22 UGR <22 <22 Imax 321 cd/klm lm 2954 lm EFFICACY 94 lm/w 100 lm/w Emergency lighting Emergency kit 1T4074 Imax 321 cd/klm lm 2954 lm EFFICACY 94 lm/w 100 lm/w Emergency lighting Emergency kit 1T TECHNICAL SUSPENSIONS TECHNICAL SUSPENSIONS 327

166 io design Daniel Bernard UGR <19 SINGLE OR SYSTEM SUSPENSION FOR LINEAR FLUORESCENT LAMPS Direct/ indirect or only indirect modular suspension for linear fluorescent lamps. Body made of extruded anodised aluminium. Painted metal lateral end caps. Transparent polycarbonate upper safety screen.the fixture can be installed either individually or else in system by means of dedicated accessories for a straight or 90 junction. Lower screen made of opal polycarbonate or low luminance grid. Steel suspension cable and transparent feeding cable complete with canopy (L = 2000mm) with micrometric regulation system Auto Block-System ABS. Integrated electronic and DALI dimmable multipower power supply. Feeding cable complete with canopy to be ordered separately. 7,1 IP40 T16 EMISSION VERSION SUPPLY CODE G5 2x 28/54W indirect elect. multipower VI 131 2x 28/54W indirect dimmable DALI VI 131 2x 28/54W direct/indirect opal screen elect. multipower VI 132 2x 28/54W direct/indirect opal screen dimmable DALI VI 132 2x 28/54W direct/indirect low luminance grid elect. multipower VI 133 2x 28/54W direct/indirect low luminance grid dimmable DALI VI 133 1V7475 1V7475DA 1V7476 1V7476DA 1V7477 1V7477DA FEEDING AND SUSPENSION CABLES* CODE Three pole feeding cable Three pole feeding cable Steel suspension cable Canopy without feeding cable Canopy without feeding cable length 5000 mm length mm length mm square circular 1V7262 1V7263 1V7264 1V7524 1V7213AB * Accessories to be ordered only for installations higher than 2000 mm. Accessories Joint for connecting two modules at 90. Joint for 1,8 1V7484 connecting two modules 0,6 in straight line. 1V7485 Off-center canopy complete with feeding cable length 2000mm. Maximum power 2kW. For double switching For single switching 1V7570 1V7523 Off-center canopy complete with feeding cable length 2000mm. Maximum power 2kW. For single switching Dimmable DALI 1V7213 1V7213DA MAXIMUM VISUAL COMFORT IO distributes the light in an optimal manner, by balancing direct and indirect emissions, so as to obtain maximum visual comfort while respecting the current lighting standards for offices and environments in which video terminals are present. The fixture can be installed separately or in system configuration (linear or 90 angular) thanks to the special accessory joints. 328 TECHNICAL SUSPENSIONS TECHNICAL SUSPENSIONS 329

167 sherazade design P. Targetti, l. querci, L. Gigli, M. Materassi UGR <19 SUSPENSION Suspension for direct and indirect light emission for linear fluorescent lamps. Slab in polished white or black polymethylmethacrylate (PMMA). Diffusive screen or low luminance grid to control direct emission. Die-cast aluminium mounting elements. Steel suspension cable (L = 2000mm) with micrometric Auto Block-System ABS. Integrated electronic and DALI dimmable power supply. Transparent feeding cable complete with canopy. 8,0 T16 VERSION COLOUR SUPPLY CODE G5 2x 54W diffusive screen white electronic TS 522 2x 54W diffusive screen white Dimmable DALI TS 522 2x 54W diffusive screen black electronic TS 522 2x 54W diffusive screen black Dimmable DALI TS 522 2x 54W low luminance grid white electronic TS 523 2x 54W low luminance grid white Dimmable DALI TS 523 2x 54W low luminance grid black electronic TS 523 2x 54W low luminance grid black Dimmable DALI TS 523 1T2264 1T2264DA 1T2265 1T2265DA 1T2262 1T2262DA 1T2263 1T2263DA BLACK AND WHITE CHARM A direct/indirect-light suspension born from the Sherazade lighting system, which is destined for stand alone use. An ultra-thin sheet, in the absolute colours of black and white, that cuts and characterizes the space. A pure and highperformance design. Two different optical configurations allow for the fixture to adapt to any environment where light must act as a protagonist. A sandblasted screen for softly diffused lighting and low-luminance grid for complete visual comfort in compliance with the current standards. 330 TECHNICAL SUSPENSIONS TECHNICAL SUSPENSIONS 331

168 PLANE design Daniel Bernard DIRECT/INDIRECT LIGHT SUSPENSION AND CEILING MOUNTED FOR LINEAR FLUORESCENT LAMPS LIGHT LINES Following the new trends in office design, PLANE fixture can be installed as a system, for illuminating large work stations, with sequentially positioned fixtures using a single power supply. SOFT AND CONTROL LIGHT High-performance and maximum visual comfort thanks to a special system of reflectors and diffusers which direct the light and distribute it uniformly throughout the space, thereby guaranteeing correct and balanced luminance values which respect the performance requirements prescribed by the current standards. Available with electronic and dimmable DALI with Easy Dimm power supplies. ELEGANT BEAM OF LIGHT A direct/indirect-light suspension fixture which is both elegant and minimalist thanks to its slender profile and special screen capable of perfect light management. The screen softly distributes the light, creating a clean and incredibly uniform effect. AUTO BLOCK SYSTEM A micrometric adjustment Auto Block System ABS, complete with canopy, providing the possibility of inclining the fixture on the horizontal axis by +/-15, for an improved functional simplicity and flexibility. 332 TECHNICAL SUSPENSIONS TECHNICAL SUSPENSIONS 333

169 PLANE UGR <19 SUSPENSION Suspension fixture with direct and indirect light emission for linear fluorescent lamps. Aluminium body with sides in aluminium finish and terminals in titanium finish. Silk screen printed white methacrylate screen, upper part in opal finish and lower part in sandblasted finish. Specular aluminium reflector. Available with electronic or dimmable electronic power supply inserted in the fixture s body. Steel suspension cables and transparent feeding cable complete with canopy, 2000 mm length. Micrometric Auto Block-System ABS, providing the possibility of inclining the fixture +/-15 on its horizontal axis. CEILING/WALL Wall and ceiling mounted fixture with direct and indirect light emission for linear fluorescent lamps. Aluminium body with sides in aluminium finish and terminals in titanium finish. Silk screen printed white methacrylate screen, internal part in opal finish and external part in sandblasted finish. Specular aluminium reflector. Electronic power supply inserted in the fixture s body. Dimmable electronic power supply available upon request. 8,0 IP40 T16 SUPPLY CODE IP40 T16 SUPPLY LENGTH L WEIGHT CODE G5 2x 28W electronic TS 240 1T0231 G5 2x 24W electronic 580 mm 6,0 Kg TS 240 1T1100 2x 28W dimmable DALI TS 240 1T0231D 2x 54W electronic 1180 mm 8,0 Kg TS 240 1T1102 2x 54W electronic TS 240 1T0230 2x 54W dimmable DALI TS 240 1T0230D 334 TECHNICAL SUSPENSIONS TECHNICAL SUSPENSIONS 335

170 PLANE SYSTEM UGR <19 Modular suspension with direct/indirect light emission for linear fluorescent lamps. This can be mounted in a system configuration by connecting a master lighting module with one or more slave modules. Aluminium body with sides in aluminium finish and terminals painted in titanium finish. Silk screen printed white methacrylate screen, internal part in opal finish and external part in sandblasted finish. Specular aluminium reflector. Electronic or dimmable DALI with Easy Dimm power supply inserted in the fixture s body. The master module is complete with two suspension steel cables that have a micrometric Auto Block-System ABS and can be inclined +/-15 horizontally; complete with a transparent 2000 mm feeding cable with canopy. Slave module equipped with suspension cable only. IP40 8,0 T16 VERSION SUPPLY CODE G5 2x 54W master electronic TS 240 2x 54W master dimmable DALI TS 240 2x 54W slave electronic TS 240 2x 54W slave dimmable DALI TS 240 1T0230 1T0230D 1T1104 1T2660 LIGHT SYSTEM Thanks to the combination of a master module with various slave modules, it is possible to obtain continuous lines of light using a single power supply available even in dimmable DALI with Easy Dimm. 336 TECHNICAL SUSPENSIONS TECHNICAL SUSPENSIONS 337

171 SLIM design Daniel Bernard Indirect or direct/indirect modular suspension for sources and linear fluorescent lamps EXTREMELY THIN Surprisingly thin and minimalist, SLIM is a professional suspension fixture, providing indirect or combined direct/indirect lighting, in a structure which is only 40mm wide and 26 mm high. Thanks to the accessory joints, it is possible to assemble the single-lamp modules in-line, or with 90 angles, in such a way so as to create closed or open systems, with total freedom of composition. SLIM RECTANGLE The simplicity of the SLIM system in a closed rectangular module for two linear fluorescent lamps or s, available in both the indirect-only lighting version, as well as in the combined direct and indirect lighting version. These fixtures can also take advantage of special joints, which offer maximum installation flexibility, to be configured as a complete lighting system. DOUBLE EFFECT The indirect-only lighting version is equipped with a single thin aluminium element, while the direct/indirect lighting version is embellished with a frosted polycarbonate diffusive screen to provide for perfectly diffused illumination. SLIM WALL see page 352 IED - Florence, Italy 338 TECHNICAL SUSPENSIONS TECHNICAL SUSPENSIONS 339

172 SLIM LINE Indirect or direct/indirect modular suspension for sources and linear fluorescent lamps. Body made of extruded anodised aluminium. Polycarbonate lateral end caps. Transparent polycarbonate upper safety screen. Lower diffusive screen made of ribbed, extruded opal polycarbonate. Steel suspension cables (L = 2000mm) with micrometric Auto Block-System ABS. The modules 1800mm length can be connected in straight line or 90 corner. version: integrated electronic power supply. Fluorescent version: integrated electronic multipower or dimmable DALI power supply. Short modules can be installed in a linear or 90 system configuration by means of specific accessories. T16 EMISSION SUPPLY LENGHT CODE G5 28W/54W indirect electronic multipower 1800 mm 1,7 VI 110 1V W/54W indirect Dimmable DALI 1800 mm 1,7 VI 110 1V7337DA 28W/54W direct/indirect electronic multipower 1800 mm 1,7 VI 111 1V W/54W direct/indirect Dimmable DALI 1800 mm 1,7 VI 111 1V7338DA To be completed with off-center canopy complete with feeding cable. 2x 28/54W indirect electronic multipower 2920 mm 3,4 VI 110 1V7335 2x 28/54W indirect Dimmable DALI 2920 mm 3,4 VI 110 1V7335DA 2x 28/54W direct/indirect electronic multipower 2920 mm 3,4 VI 111 1V7336 2x 28/54W direct/indirect Dimmable DALI 2920 mm 3,4 VI 111 1V7336DA Complete with transparent feeding cable. To be completed with cableless off-center canopy, code 1V7524 or 1V7213AB. EMISSION SUPPLY COLOUR LENGHT CODE FEEDING AND SUSPENSION CABLES CODE 19W indirect electronic 3000K 1800 mm 4,0 TS 751 1T4186 Three pole feeding cable* length 5000 mm 1V W direct/indirect electronic 3000K 1800 mm 4,0 TS 752 1T4187 Three pole feeding cable* length mm 1V W indirect electronic 3000K 3370 mm 7,2 TS 751 1T4188 Steel suspension cable* length mm 1V W direct/indirect electronic 3000K 3370 mm 7,2 TS 752 1T4189 Canopy without feeding cable square 1V7524 To be completed with feeding cable, code 1V7523 o 1V7213. Canopy without feeding cable circular 1V7213AB * Accessories to be ordered only for installations higher than 2000 mm. 2x 28/54W versions excluded. Accessories Joint for connecting two modules in line or at 90. For the codes: 1V7337, 1V7338, 1T3521, 1T3522. straight line 90 corner 1V7344 1V7345 Power supply Kit square Off-center canopy completed with feeding circular cable L 2000 mm. Maximun power 2kW. circular DALI 1V7523 1V7213 1V7213DA TS 751 TS 752 NOTE: In system like installations the quantity of feeding cables to be ordered depends on how many separate modules one decides to turn on. 21W 41,6W 41,6W 83W KELVIN 3000K KELVIN 3000K cd/1000lm α = Imax 318 cd/klm 2253 lm 4506 lm 2046 lm 4093 lm EFFICACY 97 lm/w 98 lm/w cd/1000lm α = Imax 159cd/klm 4506 lm 9012 lm 3362 lm 6725 lm EFFICACY 81 lm/w 81 lm/w 340 TECHNICAL SUSPENSIONS TECHNICAL SUSPENSIONS 341

173 SLIM RECTANGLE Indirect or direct/indirect modular suspension for sources and for linear fluorescent lamps. Body made of extruded anodised aluminium. Polycarbonate lateral end caps. Transparent polycarbonate upper safety screen. Lower diffusive screen made of ribbed, extruded opal polycarbonate. Steel suspension cables (L = 2000mm) with micrometric Auto Block- System ABS. Single modules can be installed in a system configuration by means of specific accessories. version: integrated electronic power supply. Fluorescent version: integrated electronic multipower and dimmable DALI power supply. To be completed with feeding cable complete with off-center canopy. T16 EMISSION SUPPLY CODE G5 2x 28/54W indirect electronic multipower 4,2 VI 110 2x 28/54W indirect Dimmable DALI 4,2 VI 110 2x 28/54W direct/indirect electronic multipower 4,2 VI 111 2x 28/54W direct/indirect Dimmable DALI 4,2 VI 111 1V7333 1V7333DA 1V7334 1V7334DA To be completed with feeding cable, code 1V7523 o 1V7213. EMISSION SUPPLY COLOUR CODE FEEDING AND SUSPENSION CABLES* CODE 38W indirect electronic 3000K 7,2 TS 751 1T4190 Three pole feeding cable length 5000 mm 1V W direct/indirect electronic 3000K 7,2 TS 752 1T4191 Three pole feeding cable length mm 1V7263 To be completed with feeding cable, code 1V7523 o 1V7213. Steel suspension cable length mm 1V7264 Canopy without feeding cable square 1V7524 Canopy without feeding cable circular 1V7213AB * Accessories to be ordered only for installations higher than 2000 mm. Accessories Joint for connecting two modules in line. 1V7343 Power supply Kit square Off-center canopy completed with feeding circular cable L 2000 mm. Maximun power 2kW. circular DALI 1V7523 1V7213 1V7213DA TS 751 TS 752 Note: In system like installations the quantity of feeding cables to be ordered depends on how many separate modules one decides to turn on. 41,6W 56,5W KELVIN 3000K KELVIN 3000K cd/1000lm α = Imax 318 cd/klm EFFICACY 4506 lm 4093 lm 98 lm/w cd/1000lm α = Imax 159cd/klm EFFICACY 6620 lm 4940 lm 87 lm/w 342 TECHNICAL SUSPENSIONS TECHNICAL SUSPENSIONS 343

174 WALL-MOUNTED

175 FLUSH design Daniel Bernard WALL OR CEILING RECESSED FOR HALOGEN AND FLUORESCENT LAMPS Recessed fixture wall or ceiling mounted for fluorescent and halogen sources. Metal body and outer casing. Slim flat anodized aluminium frame. Diffuser in opal white lexan with quick coupling on the body of the fixture using a click system. Electronic power supply, electronic dimmable 1/10V and in permanent emergency. IP40 o QT9 LP SUPPLY WEIGHT CODE G4 max 20W 12V additional 0,8 Kg - 1V7143 QT9 LP SUPPLY WEIGHT CODE L H l h QT9 LP TC-L 2x 18W TC-L 2x 24W G11 2x 18W electronic 2,3 Kg VI 024 2x 18W dimmable elect. 1/10V 2,3 Kg VI 024 2x 18W emergency 3,4 Kg VI 024 2x 24W electronic 3,4 Kg VI 024 2x 24W dimmable elect. 1/10V 3,4 Kg VI 024 2x 24W emergency 4,0 Kg VI 024 1V7283 1V7284 1V7285 1V7286 1V7287 1V7380 REMOTE SUPPLY LxPxH CODE Ghella Headquarter - Rome, Italy Project: RicciSpaini Architetti Associati s.r.l H P L Electronic transformer V/12V AC 50-60Hz dimmable TRIAC + IGBT 20-60W 94x20x31 mm Blue and orange adhesive films included for fixtures with QT9 LP lamps max 20W. WALL OR CEILING MOUNTED A sign of perfectly diffused light contained within an elegant frame in anodised aluminium, FLUSH can be both wall and ceiling mounted in order to guarantee the utmost formal coherence with the architectural design. 346 WALL-MOUNTED WALL-MOUNTED 347

176 FLUSH design Daniel Bernard FLUSH ACCESSORIES Recessed fixture wall or ceiling mounted for fluorescent and halogen sources. Metal body and outer casing. Slim flat anodized aluminium frame. Diffuser in opal white lexan with quick coupling on the body of the fixture using a click system. Electronic power supply, electronic dimmable 1/10V and in permanent emergency. BOX FOR INSTALLATION IN CONCRETE WALLS OR CEILINGS For codes: 1V7143 1V7253 For codes: 1V7283, 1V7284, 1V7285 1V For codes: 1V7286, 1V7287, 1V7380 1V7255 For codes: 1V7146, 1V7288 1V7256 IP40 o T16 SUPPLY WEIGHT CODE G5 39W electronic 4,1 Kg VI 024 1V W dimmable elect. 1/10V 4,1 Kg VI 024 1V7288 For codes: 1V7147, 1V7289, 1V7290 1V7257 2x 39W electronic 5,8 Kg VI 024 1V7147 2x 39W dimmable elect. 1/10V 5,8 Kg VI 024 1V7289 2x 39W emergency 7,6 Kg VI 024 1V7290 L H l h T16 39W T16 2x 39W WALL-MOUNTED WALL-MOUNTED 349

177 FORUM design Daniel Bernard 4,8 IP55 TC-L SUPPLY CODE 2G11 2x 18W magnetic TS 353 N42429 Wall recessed fixture for compact fluorescent, halogen lamps and. Moulded polycarbonate body. Satin-finished aluminium reflector with asymmetric light distribution. Partially silk screen printed tempered safety glass, 5mm thick with shock-absorbing anti-vandal mounting system, with no holes for extra resistance to accidental knocks. 316L stainless steel external metal parts. The anchor system allows for millimetric adjustment in the recessed hole. Magnetic or electronic power supply. 3,8 IP55 TC-L SUPPLY CODE 2G11 36W magnetic TS 354 N42439 IP55 QT12 SUPPLY CODE 5,5 IP55 TC-L SUPPLY CODE GY6.35 max 50W 12V additional 0,9 TS 355 N G11 2x 36W magnetic TS 353 N42449 QT14/c CODE G9 max 33W 0,9 TS 355 N COLOUR SUPPLY CODE 4,5 IP55 TC-L SUPPLY CODE 2W white electronic 0,9 TS 169 1T0220 2G11 2x 55W electronic TS 353 N42459E ACCESSORIES CODE Stainless steel surface mounting frame. For wall or ceiling mounting of Forum QT12 LP and. N42480 REMOTE SUPPLY LxPxH CODE H P L Electronic transformer V/12V AC 50-60Hz dimmable TRIAC + IGBT 20-60W 94x20x31 mm WALL-MOUNTED WALL-MOUNTED 351

178 SLIM WALL design Daniel Bernard Indirect or direct/indirect modular suspension for sources and linear fluorescent lamps. Body made of extruded anodised aluminium. Polycarbonate lateral end caps. Transparent polycarbonate upper safety screen. Lower diffusive screen made of ribbed, extruded opal polycarbonate. version: integrated electronic power supply. Fluorescent version: integrated electronic multipower and dimmable DALI power supply. OPTIC COLOR WEIGHT CODE 13W indirect 3000K 1,8 Kg TS W direct/indirect 3000K 1,8 Kg TS 752 1T4192 1T4193 T16 OPTIC SUPPLY WEIGHT CODE G5 24W indirect electronic 1,0 Kg VI W direct/indirect electronic 1,5 Kg VI 111 1V7339 1V7340 OPTIC COLOR WEIGHT CODE 25W indirect 3000K 3,7 Kg TS W direct/indirect 3000K 3,7 Kg TS 752 1T4194 1T4195 DOUBLE VERSION Two versions, with indirect lighting only or combined direct/indirect lighting, complete with a screen; transparent in the upper portion and opal grooved in the lower portion in order to soften the effect. Thanks to the multi power ballast the fixture can mount lamps with different wattages for an increased flexibility. T16 OPTIC SUPPLY WEIGHT CODE G5 28/54W 28/54W 28/54W indirect indirect direct/indirect electronic multi power electronic multi power DALI electronic multi power 1,9 Kg 1,9 Kg 1,9 Kg VI 110 VI 110 VI 111 1V7341 1V7341DA 1V /54W direct/indirect electronic multi power DALI 1,9 Kg VI 111 1V7342DA SLIM suspension see page 340 TS 751 TS ,4W 28W 28W 55,6W KELVIN 3000K 3000K KELVIN 3000K 3000K indirect direct/indirect cd/1000lm α = Imax 318 cd/klm 1502 lm 3004 lm 1364 lm 2728 lm EFFICACY 95 lm/w 97 lm/w cd/1000lm α = Imax 159cd/klm 3004 lm 6008 lm 2242 lm 4483 lm EFFICACY 80 lm/w 81 lm/w 352 WALL-MOUNTED WALL-MOUNTED 353

179 MINIMA WALL-MOUNTED Wall mounted fixture for linear fluorescent lamps with indirect or direct/indirect light emission. Body made of fireproof, painted polymer plastic or chrome version made of chromed aluminium with opal polycarbonate diffuser. Versions with direct/indirect light emission complete with upper protection screen. Integrated electronic power supply. INDIRECT LIGHT IP40 T16 COLOUR DIMENSIONS (AxBxH) WEIGHT CODE G5 39W chrome 900x30x62mm 2,2 Kg TS W aluminium 900x58x55mm 1,2 Kg TS W white 900x58x55mm 1,2 Kg TS W black 900x58x55mm 1,2 Kg TS W aluminium 1200x58x55mm 1,6 Kg TS W white 1200x58x55mm 1,6 Kg TS W black 1200x58x55mm 1,6 Kg TS T4142 1T T4146 1T4147 DIRECT/INDIRECT LIGHT T16 COLOUR DIMENSIONS (AxBxH) WEIGHT CODE G5 39W chrome 900x30x62mm 2,1 Kg TS W aluminium 900x58x55mm 1,2 Kg TS W white 900x58x55mm 1,2 Kg TS W black 900x58x55mm 1,2 Kg TS W aluminium 1200x58x55mm 1,6 Kg TS W white 1200x58x55mm 1,6 Kg TS W black 1200x58x55mm 1,6 Kg TS T4144 1T T4148 1T4149 The Groove - Loc. Pian dell Isola - Incisa Val d Arno (FI), Italy - Project: Eng. Luciano Marradi, Arch. Roberto Fabbri Photographer: Alessandro Maurelli, Marco Bartolozzi IED - Florence, Italy MINIMA CEILING MOUNTED AND SUSPENSION See page 304 LINEAR AND SUBTLE A single element, linear and subtle, with a depth of only 5,5 centimetres, obtained by excavating a solid piece of material, with no folds or seams; the corners are sharp, with no visible coupling or fastening systems. The protective screen is perfectly flush and hides the light sources while diffusing the light perfectly. 354 WALL-MOUNTED WALL-MOUNTED 355

180 MINIMINIMA WALL-MOUNTED Wall mounted fixture for linear fluorescent and sources with indirect or direct/indirect light emission. Body made of chromed or painted aluminium with opal polycarbonate diffuser. Version with direct/ indirect light emission complete with upper protection screen. Integrated electronic power supply. INDIRECT LIGHT IP40 FINISHES COLOR WEIGHT CODE 12W chrome 3000K 1,2 Kg TS W aluminium 3000K 1,2 Kg TS W white 3000K 1,2 Kg TS W black 3000K 1,2 Kg TS 749 1T4170 1T4171 1T4172 1T4173 T16 FINISHES WEIGHT CODE G5 24W chrome 1,2 Kg TS W aluminium 1,2 Kg TS W white 1,2 Kg TS W black 1,2 Kg TS T4150 1T4151 DIRECT/INDIRECT LIGHT FINISHES COLOR WEIGHT CODE 12W chrome 3000K 1,3 Kg TS W aluminium 3000K 1,3 Kg TS W white 3000K 1,3 Kg TS W black 3000K 1,3 Kg TS 750 1T4174 1T4175 1T4176 1T4177 TS 749 T16 FINISHES WEIGHT CODE KELVIN 14,7W 3000K G5 24W chrome 1,2 Kg TS W aluminium 1,2 Kg TS lm 24W white 1,2 Kg TS 578 1T4152 White Sposa Atelier - Castiglion Fiorentino, Arezzo - Project: Andrea Rocchi - Photographer: Freely Photo Imax 187 cd/klm EFFICACY 735 lm 50 lm/w 24W black 1,2 Kg TS 578 1T4153 IED - Florence, Italy TS 750 MINIMINIMA CEILING MOUNTED AND SUSPENSION See page KELVIN 14,7W 3000K 1500 lm 934 lm Imax 112 cd/klm EFFICACY 63 lm/w 356 WALL-MOUNTED WALL-MOUNTED 357

181 Q-BO MINIMALIST DESIGN IMPRESSIVE LIGHTING The fixture provides both functional and impressive lighting, as well as decorative lighting aimed at characterising a space. The Q-BO wall fixture, with its simple and minimalist shape, is entirely realised in extruded anodised aluminium and is available in the small or large version for a double lighting effect. COMPLETE RANGE In order to meet the market s functional and technical lighting requirements, Q-BO is available in various solutions; wall-mounted, ceiling mounted and suspension units with direct-only or direct/indirect emissions, for halogen and metal halide lamps. DESIGN WITH LIGHT In order to guarantee maximum flexibility of the lighting effect, the fixture can be completed with various accessories, such as sandblasted or blue silkscreened glass elements to soften or tint the beam, or else metal screens with slots to create extraordinary decorative effects. Point Hair Care Center - Helsinki, Finland. Lighting Design: Jukka Korpihete 358 WALL-MOUNTED WALL-MOUNTED 359

182 Q-BO WALL Wall mounted fixture with direct or direct/indirect light emission for halogen or metal halide lamps. Body made of painted extruded aluminium white or natural finish. Discharge lamp version complete with electronic power supply located in the fastening plate. Supplied as standard without screens, which are available as accessories. SMALL QT14/c EMISSION COLOUR WEIGHT CODE ACCESSORIES G9 max 20W direct white 0,2 Kg VI 079 max 20W direct aluminium 0,2 Kg VI 079 max 33W direct/indirect white 0,2 Kg VI 080 1V7368 1V7171 1V7369 IP40 Aluminium frame with sandblasted glass small version large version 1V7332 1V7331 LARGE max 33W direct/indirect aluminium 0,2 Kg VI 080 1V7172 Aluminium plate with central slot for light-blade effect small version large version 1V7177 1V7184 QT-DE 12 (74,9 mm) EMISSION COLOUR WEIGHT CODE R7s max 120W max 120W direct/indirect direct/indirect white aluminium 1,2 Kg 1,2 Kg VI 082 VI 082 1V7372 1V7178 IP40 White frame with sandblasted glass small version large version 1V7361 1V7360 LARGE White plate with central slot for light-blade effect small version large version 1V7367 1V7364 HIT-Tc-CE EMISSION SUPPLY COLOUR WEIGHT CODE G8.5 70W direct/indirect electronic white 1,9 Kg VI W direct/indirect electronic aluminium 1,9 Kg VI 083 1V7373 1V7179 Q-BO SUSPENSION AND CEILING MOUNTED See page WALL-MOUNTED WALL-MOUNTED 361

183 FLOOD design Daniel Bernard Wall mounted fixture with indirect light emission for sources, halogen lamps and fluorescent compact lamps. Painted metal body. version: the L.330mm is fitted with three boards with 16 sources; the L.700mm is fitted with six boards with 16 sources. Painted white aluminium sheet regenerator. Transparent protective glass. DALI dimmable 500mA driver included. Halogen version: complete with transparent borosilicate protective glass. Fluorescent version: available with integrated magnetic, electronic or dimmable DALI power supply. COLOUR LENGTH L SUPPLY CODE QT-DE 12 (114,2 mm) COLOUR LENGTH L CODE 19W white 330 mm DALI 2,5 TS F01 1T4512 R7s max 230W white 330 mm 2,3 TS 368 N W white 700 mm DALI 3,5 TS F01 1T4513 max 230W aluminium 330 mm 2,3 TS 368 N W aluminium 330 mm DALI 2,5 TS F01 1T4514 Available until July W aluminium 700 mm DALI 3,5 TS F01 1T4515 TC-L COLOUR SUPPLY LENGTH L CODE 2G11 2x 18W white magnetic 330 mm 3,9 TS 360 2x 18W aluminium magnetic 330 mm 3,9 TS 360 2x 36W white double switching 700 mm 5,1 TS 360 2x 36W white dimm. DALI 700 mm 5,1 TS 360 2x 36W aluminium double switching 700 mm 5,1 TS 360 2x 36W aluminium dimm. DALI 700 mm 5,1 TS 360 2x 55W white electronic 700 mm 5,1 TS 360 N80014 N80019 N80024 N80024DA N80029 N80029DA N80034E 2x 55W white dimm. DALI 700 mm 5,1 TS 360 N80034EDA 2x 55W aluminium electronic 700 mm 5,1 TS 360 N80039E 2x 55W aluminium dimm. DALI 700 mm 5,1 TS 360 N80039EDA TS F KELVIN 22W 3000K 43W Imax 328 cd/klm lm 4500 lm 2022 lm 4044 lm EFFICACY 92 lm/w 94 lm/w 362 WALL-MOUNTED WALL-MOUNTED 363

184 HALL design daniel bernard HALL design Daniel Bernard Wall mounted fixture with indirect light emission for sources and metal halide lamps. Painted metal body. version: fitted with 3 boards with 32 sources and an aluminium reflector. Transparent protective glass. Integrated 500mA power supply. Discharge version: aluminium asymmetric reflector, transparent borosilicate protective glass. Built-in safety fuse. Integrated magnetic power supply. 3,5 COLOUR SUPPLY CODE 37W white DALI TS H01 37W aluminium DALI TS H01 1T4506 1T4507 HIT-DE COLOUR SUPPLY CODE RX7s 70W 70W 150W 150W white aluminium white aluminium magnetic magnetic magnetic magnetic 5,4 5,4 6,1 6,1 TS 362 TS 362 TS 362 TS 362 N80244 N80249 N80204 N80209 HIT-DE COLOUR SUPPLY CODE Fc2 250W white magnetic 7,5 TS W aluminium magnetic 7,5 TS 363 N80224 N80229 TS H KELVIN 43W 3000K 4500 lm Hermitage Museum Repository - St Petersburg, Russia Project: Trofimov Studio Imax 506 cd/klm 105 β=67 EFFICACY 4019 lm 93 lm/w 364 WALL-MOUNTED WALL-MOUNTED 365

185 SQUADRA design daniel bernard Wall mounted fixture with indirect light emission for sources and halogen lamps. Painted metal body. version: fitted with 3 boards with 16 sources. Painted white aluminium sheet regenerator. Transparent protective glass. Integrated 500mA power supply. Halogen version: aluminium asymmetric reflector, transparent borosilicate protective glass. Double lighting with built-in switch. 2,5 COLOUR SUPPLY CODE W white electronic TS S01 19W aluminium electronic TS S01 1T4500 1T W white DALI TS S01 19W aluminium DALI TS S01 1T4502 1T4503 2,4 QT-DE 12 (114,2 mm) COLOUR SUPPLY CODE R7s 2x max 120W white double switching TS 361 2x max 120W aluminium double switching TS 361 N80264 N80269 Available until June 2015 TS S KELVIN 22W 3000K 2250 lm 2045 lm Imax 324 cd/klm 114 EFFICACY 93 lm/w 366 WALL-MOUNTED WALL-MOUNTED 367

186 SYSTEMS

187 SHERAZADE design P. Targetti, L. Querci, L. Gigli, M. Materassi MODULAR SYSTEM FOR FLUORESCENT, HALOGEN, METAL HALIDE LAMPS AND s MAXIMUM CREATIVE FREEDOM Flat, curved and wavy modules provide for a three-dimensional system which winds in absolute freedom. Accent lighting with halogen, metal halide and lamps, diffused lighting with linear and compact fluorescent lamps. GREAT BRIGHTNESS In the absolute colours of black and white, both with a glossy finish, SHERAZADE modules are made from lacquered PMMA, which is characterised by its exceptional brightness, high thermal resistance and totally recyclable nature. QUICK AND EASY INSTALLATION All of the modules come pre-wired and equipped with quick connection plugs, allowing for an installation both quick and easy. The individual modules connect to each other mechanically thanks to the coupling/suspension arm. Three separate power circuits allow for the lighting to be managed in absolute freedom. 370 SYSTEMS

188 SHERAZADE PLANAR FLUORESCENT Modular suspension for linear fluorescent lamps with direct/indirect light emission to be installed in a system. Polished white or black body made of polymethylmethacrylate (PMMA). Highly efficient low luminance version with controlled optics made of anodised aluminium; diffused light version with a white, satin finish methacrylate screen, equipped with an aluminium internal flow recuperator. Electronic power supply. To be completed with suspension and power supply kits. 9,0 T16 OPTIC SUPPLY COLOUR CODE G5 2x 54W low luminance grid electronic white TS 523 2x 54W low luminance grid electronic black TS 523 2x 54W diffusive screen electronic white TS 522 2x 54W diffusive screen electronic black TS 522 1T2406 1T2407 1T2408 1T2409 MOUNTING AND SUPPLY KIT See page SYSTEMS SYSTEMS 373

189 SHERAZADE PLANAR MODULES QR111 DR111 SUPPLY COLOUR LENGTH CODE Multi-lamp or source-free planar modules to be installed as a single suspension or in a system configuration. Polished white or black body made of polymethylmethacrylate (PMMA). The optics are adjustable by means of a patented gyroscopic system, +/- 175 horizontally and +/- 45 vertically. Complete with electronic ballast. To be completed with suspension and power supply kits. G53 1x max 100W/15W 1x max 100W/15W 2x max 100W/15W 2x max 100W/15W 2x max 100W/15W electronic electronic electronic electronic electronic white black white black white 750 mm 750 mm 750 mm 750 mm 1500 mm 3,4 3,4 3,7 3,7 5, x max 100W/15W 4x max 100W/15W 4x max 100W/15W electronic electronic electronic black white black 1500 mm 1500 mm 1500 mm 5,4 6,0 6, DR111 lamp not dimmable 1T2615 1T2616 1T2621 1T2622 1T2627 1T2628 1T2148 1T2149 HIR111-CE SUPPLY COLOUR LENGTH CODE GX8.5 1x 35W 1x 35W 2x 35W 2x 35W 2x 35W electronic electronic electronic electronic electronic white black white black white 750 mm 750 mm 750 mm 750 mm 1500 mm 3,4 3,4 3,7 3,7 5, x 35W electronic black 1500 mm 5,4-4x 35W electronic white 1500 mm 6,0-4x 35W electronic black 1500 mm 6,0-1T2617 1T2618 1T2623 1T2624 1T2629 1T2630 1T2150 1T2151 ACCESSORIES TC-TEL SUPPLY COLOUR LENGTH CODE GX24q-3 1x 26W electronic white 750 mm 3,4 TS 514 1T2619 Anti-glare ring Anti-glare ring to shield the lamp. 1T2198 1x 26W electronic black 750 mm 3,4 TS 514 1T2620 2x 26W electronic white 750 mm 3,7 TS 514 1T2625 2x 26W electronic black 750 mm 3,7 TS 514 1T2626 MOUNTING AND SUPPLY KIT See page 380 4x 26W electronic white 1500 mm 5,4 TS 514 1T2631 4x 26W electronic black 1500 mm 5,4 TS 514 1T2632 LAMPS DR111 OPTIC COLOR CODE SOURCE-FREE COLOUR LENGTH CODE G53 15W SP (24 ) 3000K 0B333 white 750 mm 1,7-1T W FL (35 ) 3000K 0B334 black 750 mm 1,7-1T2614 For correct operation of SHERAZADE version, we recommend use of the lamps and the accessory ballasts indicated in this catalogue. white 1500 mm 5,0 - black 1500 mm 5,0-1T2146 1T SYSTEMS SYSTEMS 375

190 SHERAZADE WAVE MODULES Multi-lamp or source-free wave modules to be installed as a single suspension or in a system configuration. Polished white or black body made of polymethylmethacrylate (PMMA). The optics are adjustable by means of a patented gyroscopic system, +/-175 horizontally and +/-45 vertically. Complete with electronic ballast. To be completed with suspension and power supply kits. QR111 DR111 SUPPLY COLOUR LENGTH CODE ACCESSORIES G53 2x max 100W/15W electronic white 1500 mm 5,5 1T2633 2x max 100W/15W electronic black 1500 mm 5,5 1T2634 Anti-glare ring Anti-glare ring to shield the lamp. 1T2198 4x max 100W/15W electronic white 1500 mm 6,0 1T2156 4x max 100W/15W electronic black 1500 mm 6,0 1T2157 DR111 lamp not dimmable MOUNTING AND SUPPLY KIT See page 380 HIR111-CE SUPPLY COLOUR LENGTH CODE LAMPS DR111 OPTIC COLOR CODE GX8.5 2x 35W electronic white 1500 mm 5,5 1T2635 G53 15W SP (24 ) 3000K 0B333 2x 35W electronic black 1500 mm 5,5 1T W FL (35 ) 3000K 0B334 4x 35W electronic white 1500 mm 6,0 1T2158 For correct operation of SHERAZADE version, we recommend use of the lamps and the accessory ballasts indicated in this catalogue. 4x 35W electronic black 1500 mm 6,0 1T2159 SOURCE-FREE COLOUR LENGTH CODE white 1500 mm 5,0 1T2154 black 1500 mm 5,0 1T SYSTEMS SYSTEMS 377

191 SHERAZADE CURVE MODULES Multi-lamp or source-free curve modules to be installed as a single suspension or in a system configuration. Polished white or black body made of polymethylmethacrylate (PMMA). The optics are adjustable by means of a patented gyroscopic system, +/- 175 horizontally and +/- 45 vertically. Complete with electronic power supply. Curve 90 predisposed for two lamps, curve 45 predisposed for four lamps. To be completed with suspension and power supply kits. QR111 DR111 SUPPLY COLOUR CURVE CODE ACCESSORIES LARGE CURVE 45 SMALL CURVE 90 G53 2x max 100W/15W electronic white 90 3,1-2x max 100W/15W electronic black 90 3,1-1T2164 1T2165 Anti-glare ring Anti-glare ring to shield the lamp. 1T2198 4x max 100W/15W electronic white 45 6,0-1T2172 4x max 100W/15W electronic black 45 6,0-1T2173 DR111 lamp not dimmable MOUNTING AND SUPPLY KIT See page 380 HIR111-CE SUPPLY COLOUR CURVE CODE GX8.5 2x 35W electronic white 90 3,1-1T2166 LAMPS DR111 OPTIC COLOR CODE 2x 35W electronic black 90 3,1-1T2167 G53 15W SP (24 ) 3000K 0B333 4x 35W electronic white 45 6,0-1T W FL (35 ) 3000K 0B334 4x 35W electronic black 45 6,0-1T2175 For correct operation of SHERAZADE version, we recommend use of the lamps and the accessory ballasts indicated in this catalogue. TC-TEL SUPPLY COLOUR CURVE CODE GX24q-3 2x 26W 2x 26W electronic electronic white black ,1 3,1 TS 514 1T2168 TS 514 1T2169 SOURCE-FREE COLOUR CURVE CODE white black white black ,5 2,5 5,0 5, T2162 1T2163 1T2170 1T SYSTEMS SYSTEMS 379

192 SHERAZADE ACCESSORY MODULES CURVES Angle COLOUR CODE MOUNTING AND SUPPLY 45 white 1,0 1T black 90 white 90 black 1,0 1,0 1,0 1T2179 1T2643 1T2644 Suspension kit Suspension kit and module joints of the system. Complete with a 2000 mm steel cable with a micrometric Auto Block-System ABS. 1T2190 Wall mounting kit Wall mounting and connection kit for system modules. 1T2197 CONNECTIONS Type COLOUR CODE three sides three sides four sides four sides white black white black 1,7 1,7 2,0 2,0 1T2639 1T2640 1T2641 1T2642 Power supply kit Power supply kit complete with 5-pole cable for a max of 3 separated switching. Max 2kW. white black 1T2414 1T2415 HEIGHT RAISERS COLOUR CODE white black white black 2,0 2,0 1,5 1,5 1T2195 1T2196 1T2180 1T2181 RIGID SUSPENSIONS COLOUR Cabling CODE white no 2,7 1T2182 black no 2,7 1T2183 white yes* 2,7 1T2416 black yes* 2,7 1T2417 * Cabled version complete with feeding cable for connection to the mains supply system. END MODULES COLOUR CODE white black 0,3 0,3 1T2637 1T SYSTEMS SYSTEMS 381

193 STRIP

194 BELT FLEXIBLE LIGHTING PROFILES WITH VERSATILE RANGE luminous strips, supplied in 5 mt. reels for indoor and outdoor use and distinguished for their high luminous efficacy, the dimmable option, zero maintenance and zero UV emissions; available in warm white (2800K and 3000K) up to 77W and in the 50W RGB version. MAXIMUM FLEXIBILITY Its compact size, ductility and different power allows BELT to create a luminous feature (up to 1200lm/m) highlighted by a soft halo of light that can be shaped according to the design requirements: cove lighting, lighting of niches, pathways, etc. The 24V power supply also allows creating longer installations without having to worry about voltage drops. EASY INSTALLATION The silicone version with adhesive backing is quick and easy to assemble, thanks to 3M bioadhesive film or the included silicone clips, available for the and IP68 version. All the profiles are pre-wired and come with IP connectors (Outdoor versions) for fast and safe wiring. Each strip can also be cut to length at regular intervals of 6 s. The product is supplied with a special kit for restoring the waterproof properties of the profile for the outdoor versions. This kit is also available separately as an accessory. ALUMINIUM PROFILES FOR INSTALLATION ON SIGHT A complete range of rigid profiles in anodised aluminium available as accessories, increases the flexibility of the system offering many different installation possibilities, e.g. countertop, recessed, on sloping surfaces. The profiles come with a white diffusive screen and are available in two different finishes - white and aluminium to be used in any type of setting or context. Leaning Tower of Pisa - Italy 384 STRIP STRIP 385

195 BELT light strip. Flexible PVC profile, supplied in 5 meter reels with 120 S/m (77W versions) and 60 s/m (24W and 41W), equipped with wires and connectors on both ends. Available in the RGB Version with 60/m (50W). Front-emitting s with a projection angle of 120 available with or IP68 protection. The strips can be installed using 3M bioadhesive film or silicone fixing clips (supplied). For the visible installation, the rigid profiles are also available as accessories. The strip can be cut to length with a pair of scissors at intervals of 6 s (restoring the waterproof properties with the caps supplied for IP68 versions). Each reel comes with an extra kit of male-female connectors for cutting the light profile in two segments. Maximum length for single feeding 5 meters. To be fed with 230V/24V- DC electronic transformer available as an accessory. Dimming is possible by means of the special Kit available as accessory. Also suitable for outdoor and permanent underwater installation. 24V-DC IP68 INDOOR INSTALLATION VOLT LIGHT BEAM APERTURE COLOUR CODE 24W 41W 77W 24V 24V 24V K 2800K 2800K TS 747 TS 747 TS 747 1T3579 1T3580 1T3581 OUTDOOR AND INDOOR INSTALLATION VOLT LIGHT BEAM APERTURE COLOUR CODE 24W 24V K TS W 24V K TS W 24V K TS W 24V 120 RGB RGB TS 747 1T3582 1T3583 1T3584 1T3585 ACCESSORIES See page 402 REMOTE SUPPLY LxHxP CODE P L 50W 24V 165x64x22 mm 1T3726 H 75W 24V 225x47x38 mm IP67 1T W 24V 230x87x43 mm IP67 1T W 24V 238x63x43 mm IP67 1T3588 CONTROLLER 2x120W Controller DALI 2x 5A 12/24V 1T /41W - 60 /m - 24/41W - 60 /m - IP68 240W Controller 1-10V 12/24V active/passive 1x 10A 1T W/ch Controller DMX RGB 6A/ch 12/24V 1T W Versions maximum 15 meters can be connected to the same power supply - 41W Versions maximum 10 meters can be connected to the same power supply - 77W Versions maximum 5 meters can be connected to the same power supply Two strips of 77W can be connected in parallel to the same power supply 77W /m - 77W /m - IP68 TS ,5W 41,5W 77,2W 50,3W RGB 50W - 60 /m - IP68 cd/1000lm α = Imax 330 cd/klm KELVIN 2800K 3000K 2800K 3000K 2800K 3000K RGB 2044m 1854lm 3216lm 2917lm 5955lm 5402lm 1256lm 2044m 1854lm 3216lm 2917lm 5955lm 5402lm 1256lm EFFICACY 83 lm/w 76 lm/w 77 lm/w 70 lm/w 77 lm/w 70 lm/w 25 lm/w IMAX 674cd 612cd 1061cd 962cd 1965cd 1782cd 414cd The rapid technical progress of sources results in continuous changes in terms of luminous flux and, consequently, efficacy. The information provided by the catalogue should therefore be referred to the date of publication - for regularly updated information please visit the site STRIP STRIP 387

196 BELT ACCESSORIES Rigid profiles in anodised aluminium for countertop installations complete with white diffusive plastic cover. Profiles for countertop installations complete with diffusive cover mm Profiles for countertop installations complete with diffusive cover mm Kit containing 2 profile closing caps + 2 clips* Profiles for countertop installations complete with diffusive cover mm Profiles for countertop installations complete with diffusive cover mm Kit containing 2 profile closing caps + 2 clips* * 1 kit for max 2000 mm Aluminium Aluminium Aluminium White White White 1T3594 1T3705 1T3600 1T3595 1T3708 1T3601 Rigid profiles in anodised aluminium for recessed installations complete with white diffusive plastic cover. Profiles for recessed installations complete with diffusive cover mm Profiles for recessed installations complete with diffusive cover mm Kit containing 2 profile closing caps + 2 clips* Profiles for recessed installations complete with diffusive cover mm Profiles for recessed installations complete with diffusive cover mm Kit containing 2 profile closing caps + 2 clips* * 1 kit for max 2000 mm Aluminium Aluminium Aluminium White White White 1T3596 1T3706 1T3602 1T3597 1T3709 1T3603 Iberotel - Apulia, Italy Rigid profiles in anodised aluminium for sloping installations (45 ) complete with white diffusive plastic cover. Profiles for sloping installations (45 ) complete with diffusive cover mm Profiles for sloping installations (45 ) complete with diffusive cover mm Kit containing 2 profile closing caps + 2 clips* Profiles for sloping installations (45 ) complete with diffusive cover mm Profiles for sloping installations (45 ) complete with diffusive cover mm Kit containing 2 profile closing caps + 2 clips* * 1 kit for max 2000 mm Aluminium Aluminium Aluminium White White White 1T3598 1T3707 1T3604 1T3599 1T3710 1T3605 Cut kit IP68* (kit for 4 cuts with caps and resin) Cut kit (kit for 4 cuts) - For BELT 24W and 41W Cut kit (kit for 4 cuts) - For BELT 77W * Not suitable for RGB version. 1T3592 1T3593 1T3743 Hotel Savoia, Genova - Italy 388 STRIP STRIP 389

197 COVELUM Flexible linear system complete with adjustable modules. The system allows to create continuous light rows with concave and convex curves with no need of special tools. Possibility to adjust the led modules for a perfect illumination even on uneven surfaces e.g: historical buildings. May be field-cut after any module. Complete with clip-on lampholders for a quick toolfree installation of the modules along the line. To be completed with mounting kit (one for each meter). Electronic transformer 230V/12V DC available as an accessory. LENGTH L COLOUR WEIGHT CODE 12W 1000 mm 2800K 0,5 Kg TS W 1000 mm 4000K 0,5 Kg TS W 2000 mm 2800K 0,9 Kg TS W 2000 mm 4000K 0,9 Kg TS 746 1T2674 1T2675 1T2676 1T2677 Minimum bending radius 305 mm REMOTE SUPPLY LxHxP CODE H P L Power supply electronic for white s 230/240VAC-12VDC 20W 70W max 1x (Code 1T2674/5) 145x19x55 mm max 2x (Code 1T2676/7) 248x50x60 mm T1585 T1586 ACCESSORIES Corner electrical connector for 90 curves 1T2679 Mounting Kit Clear polycarbonate mounting clips (3 pcs). 1T2678 PVC end caps Can be used to protect and insulate the conductors at the end of a run. 1T2680 spare part module Warm white 2800K Neutral white 4000K 1T2681 1T2682 TS cd/1000lm +Watt Store - Florence, Italy. Project: arch. Sara Crema Photographer: Federico Paoli cd/klm 390 STRIP STRIP 391

198 FILTERS

199 CHROMATIC FILTERS CHROMATIC FILTERS ABACUS These filters play with light to create true light scenarios, to draw attention and to provide emotions. Chromatic filters in various colours which are calibrated for the various light sources technical characteristics. Intense and perfectly saturated colours for scenes which are sure to impress. CURVED FLAT ø 106 mm prismatic ø 106 mm ø 101 mm ø 70 mm ø 50 mm ø 35 mm 1T T1700 1T T T1701 1T T T1702 1T T T1703 1T T T1704 1T ARC HIT-CE ARC QR111 NAUTUS HIT-CE NAUTUS HIT-Tc-CE ARC 50 QR-CB 51 FOHO + shaper QR-CB 51 TRAIL HIT-CE QR111 MAGMA HIT-CE FOHO HIT-Tc-CE FOHO QR-CB 51 FOHO HIT-CE MINIDESE HIT-CE COVE PROJECTOR HIT-CE TRANSMITTANCE INDEX TABLE SOURCES RED COLOURS GREEN BLUE YELLOW MAGENTA τ τ τ τ τ QR-CB K 0,14 0,33 0,47 0,87 0,12 QR-CB K 0,14 0,29 0,43 0,87 0,12 UNIVERSAL CHROMATIC FILTERS Universal filters for QR111 lamps. Available in 8 colours plus the UV Stop filter. QT-DE K 0,18 0,31 0,20 0,94 0,14 QR K 0,11 0,31 0,16 0,89 0,11 HIT 3000 K 0,12 0,36 0,16 0,93 0,10 HIT 4000 K 0,05 0,44 0,21 0,87 0,07 Red Green Blue Yellow UV Stop HIT 4200 K 0,10 0,38 0,22 0,86 0, The numeric value refers to the transmittance index of the filter in relation to the lighting source. The number indicated, multiplied by the lux obtained with a given light source, makes it possible to calculate the real illumination values after filtering. Optimized chromatic effect Average chromatic effect Poor chromatic effect Magenta Light Green Cyan *The rubber ring is only to be used with the QR111 lamp with an 8 beam angle. Orange Rubber ring* 1T FILTERS FILTERS 395

200 CORRECTIVE FILTERS TONE FILTERS Corrective filters which modify the spectrum of the light sources, varying their spectral composition and changing their colour temperature, thereby warming or cooling the light. The use of corrective filters allows for the chromatic qualities of an object to be exalted, emphasising its communicative message, for example, in terms of freshness, warmth, fragrance and purity. This makes possible to alter the perception of various objects within the same environment by simply applying a different filter to each light source. Corrective filters for halogen lamps which have been specifically designed to optimise the chromatic qualities of these light sources on every wavelength. Calibrated with the utmost precision, each tone has three different grades, for soft, medium and dark effects, which allow for maximum light tone accuracy to be obtained. COLD SUN Calibrated for the HIT-CE 3000K lamp, this filter reduces the colour temperature of about 300K, favouring warm colours. SUNSET Calibrated for the HIT-CE 3000K lamp, this filter reduces the colour temperature of about 700K, favouring reddish colours. POLAR Calibrated for the HIT-CE 4200K lamp, this filter increases the colour temperature of about 500K, exalting cold colours. soft medium dark TONE FILTERS ABACUS CORRECTIVE FILTERS ABACUS SKIN FLAT ø 50 mm CURVED FLAT soft medium dark ø 106 mm prismatic ø 106 mm ø 101 mm ø 70 mm soft medium dark COLD 1T1744 1T1745 1T1746 SUN 1T T1705 1T1717 SKIN 1T1741 1T1742 1T1743 SUNSET 1T T1706 1T1718 GOLD GOLD 1T1747 1T1748 1T1749 POLAR 1T T1707 1T1719 PEACH 1T1750 1T1751 1T1752 ARC HIT-CE TRAIL HIT-CE NAUTUS HIT-CE NAUTUS HIT-Tc-CE soft medium dark FOHO HIT-CE MAGMA HIT-CE FOHO HIT-Tc-CE PEACH ARC 50 COVE PROJECTOR HIT-CE FOHO QR-CB 51 soft medium dark 396 FILTERS FILTERS 397

201 REFRACTIVE FILTERS UV STOP FILTERS BEAM ANGLE NO FILTER WITH DIFFUSIVE FILTER WITH Blade of light FILTER Modelling filters with surface treatments which allow for the beam to be moulded, softened or made oval, thereby altering its shape and edges without changing the characteristics of its colour. Filters which allow for the elimination of type UV/B ultraviolet rays and the reduction of type UV/A ultraviolet rays (>90%). Transmission % λ (nm) REFRACTIVE FILTERS ABACUS UV STOP FILTERS ABACUS FLAT UNIVERSAL CURVED FLAT ø 106 mm ø 101 mm ø 70 mm ø 106 mm ø 106 mm prismatic ø 106 mm ø 101 mm ø 70 mm Diffusive T1697 1T T T1698 1T1710 Blade T1696 1T FOHO HIT-CE NAUTUS HIT-CE QR111 NAUTUS HIT-TC-CE For lamps QR111 ARC HIT-CE ARC QR111 NAUTUS HIT-CE QR111 NAUTUS HIT-TC-CE COVE PROJECTOR HIT-CE MAGMA HIT-CE QR111 FOHO HIT-TC-CE MONDIAL QR111 MAGMA HIT-CE QR111 FOHO HIT-TC-CE MINI DESE HIT-CE TRAIL HIT-CE QR111 MINIDESE HIT-CE FOHO HIT-CE 398 FILTERS FILTERS 399

202 TECHNICAL DATA