WELCOME TO LIGHT BROKERS TO SUIT ANY APPLICATION AND BUDGET.

Transcription

1 LIGHTING CATALOGUE

2

3

4

5 INTRODUCTION LIGHT BROKERS HAS PROVIDED LIGHTING SOLUTIONS ALL OVER AUSTRALIA FOR OVER 20 YEARS. OFFERING CONSULTATION, LIGHTING DESIGN AND A WIDE RANGE OF PRODUCTS WELCOME TO LIGHT BROKERS TO SUIT ANY APPLICATION AND BUDGET. DISCLAIMER All technical data and specifi cations within this catalogue are subject to change without prior notifi cation or public announcement. They are to be used as a guide only and errors and omissions are excepted. Light Brokers Pty Ltd constantly improves or adjusts its range of luminaires, therefore it is essential that important data such as cutout sizes for ceiling holes are to be confi rmed before proceeding with any cutting or construction, as sizes may change without notice. All care has been taken to ensure that the information in this catalogue is correct at the time of publication, and in keeping with Light Broker s policy of constant improvement, products supplied may differ in some detail to those illustrated in this catalogue. Therefore this catalogue shall not form a part of any contract. All products are supplied subject to standard terms and conditions of Light Brokers Pty. Ltd. The LED luminaires are conditionally guaranteed for three years provided the equipment is installed to the satisfaction of Light Brokers, and the relevant authorities. Light Brokers will make any necessary replacements of faulty products during their guarantee period, without charge and upon return of the goods to Light Brokers. We reserve the right to use our own maintenance facilities for rectifi cation and claims for charges by other parties will not be accepted. All lighting designs appearing in this catalogue remain the property of Light Brokers Pty. Ltd. Light Brokers is a registered trademark. PLEASE NOTE: Designs and technologies within this catalogue are covered by patent rights. Lamps are not included with the catalogued luminaires, unless specified, and should be ordered separately. INTRODUCTION 1

6 INTRODUCTION LED TECHNOLOGY THE COMPARISON TABLE* TYPICAL HALOGEN LAMP 35W = Lumens 50W = Lumens 100W = Lumens LIGHT BROKERS LED 3000K CRI85 8W = Equal Performance 13W = Better Performance 28W = Better Performance * Others may compare high colour temperatures as a halogen equivalent. This is not a fair comparison as higher colour temperatures usually have more output. LIGHT EMITTING DIODES LIGHT EMITTING DIODES LED are not a new form of light source, they have been used for many years as indicator lights, on electrical appliances and on many other products and devices that we can all recall. It is only in the last few years that LED s have been developed further so that they can be used for alternatives to traditional lighting. Due to energy saving requirements and higher costs in power and maintenance, we researched and developed a range of LED lighting products that are superior in performance to other available products. We have developed our own technologies, customised diode arrays and leading thermal management processes that has given us patent recognition. Our range of Australian designed and made LED products have proven time and time again that not all LED luminaires are the same. The list of high profile clients around Australia and overseas is growing and our clients have constantly commented on the efficiency and performance of our products. Imitation is the greatest form of flattery, but we are always a step ahead of the rest! TECHNOLOGY The development of our LED technology has produced a wide range of LED fixtures that can perform to its highest level possible from what we can extract from technology. There are a number of core components that must be of the highest available quality to conform to our best practice. For example the LED dies are Japanese made with phosphor coatings that yield long life with no visible colour shift over time. We have standardised on one tight customized colour bin for each colour temperature so our customers can enjoy an environment of consistent colour. Our optical design delivers high light output that is well known around the world. Thermal management design is paramount if you want your LED to last. No short cuts can be taken here. We are meticulous with our designs and materials ensuring long-life and durability to withstand the harsh Australian climate. Our range of LED fixtures are designed and built in Australia and come with a three year warranty. 2

7 LIGHTING DESIGN & SIMULATION INTRODUCTION LIGHTING DESIGN & SIMULATION S A 1 A A A A 1 A A 1 1 A1 A 1 A A A 1 A A A1 A A LIGHTING DESIGN is achieved using the world renowned AGI32 a decade of inhouse experience allows us to accurately simulate lighting environments and recommend the most suitable luminaire. Lux levels can be shown at any point, particularly on the horizontal and vertical planes. Vertical illumination is very important in retail environments. Our lighting designs will show you the Lighting Power Density (watts per m²) in an area in order to be compliant to sections of the building code and AS1680. IES photometric files are available for our range of LED luminaires. 3

8 LEGEND PHOTOMETRY DATA IP RATING / TECHNICAL & SAFETY CLASSIFICATIONS COLOUR CODE SUFFIX (code-xx) First digit Second digit Penetration of solid objects Penetration of water Satin white 0 1 No protection greater than dia 50mm 0 1 No protection dripping water Texture white 2 greater than dia 12mm 2 dripping water when tilted 15Þ Satin black 3 greater than dia 2.5mm 3 rain water Texture black 4 5 greater than dia 1.0mm air borne dust 4 5 splashing water water jets Grey 6 dust tight 6 heavy seas Bright silver 7 water tight Texture silver 8 m submersion Anodised silver angle of adjustable tilt circular hole size for installation Pearlescent silver angle of adjustable rotation rectangular hole size for installation Polished chrome ALL DIMENSIONS SHOWN IN THIS CATALOGUE ARE IN MILLIMETRES. In compliance with European IEC529 and Australian Standard AS UV filter glass supplied with luminaire Class I provided with an earth connection Class II double insulated - no earth connection Class III safe extra low voltage supply Brushed chrome Matt chrome Brushed stainless steel Polished stainless steel Brushed aluminium Polished aluminium Suitable for mounting on normally flammable surface Polished & satin chrome Signifies that a product conforms with the requirements of EEC directives RUST Manufactured from materials that will not rust PHOTOMETRIC DATA ELEMENTS OF PHOTOMETRIC DIAGRAMS Scale of luminous intensity Polar distribution curve of luminous intensity C0 - C180 transverse plane A difference in these cones ndicates an asymmetrical output C90 - C270 Longitudinal plane Lamp icon cd / Klm 30 2x30 150w HQI-TS Lamp power and type h Lux dia. Beam conical angle Distance to luminaire Approximate area of beam falling on to a horizontal plane Average lux levels on the horizontal plane based on 1/2 of maximum intensity 1/2 beam conical angle

9 CONTENTS LED RANGE DRIVERS & CONTROL GEAR METAL HALIDE 61 PENDANTS V DOWNLIGHTS & SPOTLIGHTS FLUORESCENT TRACK LIGHTS EXTERIOR LIGHTING

10 VERONIKA MAINE - WESTFIELD LIVERPOOL NSW

11 LED RANGE 07 45

12 LED RANGE IP44 SELV Recessed downlight with ultra bright LED, with plenty of punch and different beam angle options. This fitting is a true alternative to Dichroic Halogen Lamps. Excellent thermal characteristic for non-airconditioned ceilings up to 60 C Recessed LED downlight with different beam angle options, tilt adjustable and rotatable with low light clipping. Ultra bright 13W version available, more than enough to use as alternative to dichroic. Ambient temperature rating up to 60 C Recessed LED downlight designed to visually integrate within planar ceilings whilst providing low glare illumination. Conical housing with minimal trim width and thickness. Powdercoat paint finish MIN. MOUNTING DEPTH REQUIRED 105MM MIN. MOUNTING DEPTH REQUIRED 120MM SUITABLE FOR CEILING THICKNESS UP TO 40MM THIS MODEL ALSO AVAILABLE IN 18W 90 Chrome Brushed Chrome Black Chrome Brushed Chrome Black CODE BEAM ANGLE COLOUR TEMPERATURE WATTAGE LUMENS 13W or 8W Japanese LED Module 50,000+ hour lifespan Super efficient optical control Clear tempered glass Comfort low glare output Max.15% lumen depreciation after 40,000 hrs Die-cast construction in aluminium alloy Power factor > 0.9 Code-SP-3K-8W Code-FL-3K-8W Code-SP-4K-8W Code-FL-4K-8W Code-SP-5K-8W Code-FL-5K-8W Code-SP-3K-13W Code-FL-3K-13W Code-VWFL-3K-13W Code-SP-4K-13W Code-FL-4K-13W Code-VWFL-4K-13W Code-SP-5K-13W Code-FL-5K-13W Code-VWFL-5K-13W K 2800K 4000K 4000K 5000K 5000K 8W 8W 8W 8W 8W 8W Total system power consumption for 8W=10W K 3000K 3000K 4000K 4000K 4000K 5000K 5000K 5000K 13W 13W 13W 13W 13W 13W 13W 13W 13W Total system power consumption for 13W=14.8W. PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. IES FILES ARE AVAILABLE UPON REQUEST

13 LED RANGE IP20 SELV Single or multiple downlights with independent adjustment. High output energy efficient LED downlight. Tilt adjustable and rotatable with low light clipping. Can operate in very high ambient temperatures of up to 60 C LED LED LED INTERNAL HOUSING IS ALWAYS BLACK INTERNAL HOUSING IS ALWAYS BLACK INTERNAL HOUSING IS ALWAYS BLACK x x x310 CODE BEAM ANGLE COLOUR TEMPERATURE WATTAGE LUMENS (PER ONE LED) 13W or 8W Japanese LED Module 50,000+ hour lifespan Super efficient optical control Comfort low glare output Installation springs suitable for ceiling thickness up to 20mm Tilt adjustable and rotatable Supplied with compatible mains remote, leading and trailing edge LED driver with power cord and moulded plug top Max. 15% lumen depreciation after 40,000 hrs Power factor > 0.9 Code-SP-3K-8W Code-FL-3K-8W Code-SP-4K-8W Code-FL-4K-8W Code-SP-5K-8W Code-FL-5K-8W Code-SP-3K-13W Code-FL-3K-13W Code-VWFL-3K-13W Code-SP-4K-13W Code-FL-4K-13W Code-VWFL-4K-13W Code-SP-5K-13W Code-FL-5K-13W Code-VWFL-5K-13W K 2800K 4000K 4000K 5000K 5000K 8W 8W 8W 8W 8W 8W Total system power consumption for 8W =10W K 3000K 3000K 4000K 4000K 4000K 5000K 5000K 5000K 13W 13W 13W 13W 13W 13W 13W 13W 13W Total system power consumption for 13W =14.8W. PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. IES FILES ARE AVAILABLE UPON REQUEST 9

14 LED RANGE IP65 SELV Recessed square fixed LED downlight with high output optical design system. Compact LED Downlight with wet area protection. High output optical design system. Recessed square aluminium die-cast bezel LED Downlight. Wet area protection and high output optical design system x Black Brushed 70 Brushed Chrome Chrome 13W or 8W Japanese LED Module 50,000 + hour lifespan CEILING RING TO BE FITTED INTO CEILING HOLE FIRST CEILING RING TO BE FITTED INTO CEILING HOLE FIRST Super efficient optical control Comfort low glare output Clear tempered glass with double silicone gaskets Totally sealed unit with cable gland fitted for IP65 protection Supplied with double silicone gasket ceiling ring Die-cast construction in aluminium alloy Supplied completely assembled with remote leading and trailing edge dimmable driver with power cord and moulded plug top 8W is similar output to a 35W MR16 halogen lamp 9.5W or 13.5W total system power consumption Power Factor > 0.9 Max. 15% lumen depreciation after 40,000hrs CODE Code-SP-3K-8W Code-FL-3K-8W Code-SP-4K-8W Code-FL-4K-8W Code-SP-5K-8W Code-FL-5K-8W Code-SP-3K-13W Code-FL-3K-13W Code-SP-4K-13W Code-FL-4K-13W Code-SP-5K-13W Code-FL-5K-13W BEAM ANGLE COLOUR TEMPERATURE 3000K 3000K 4000K 4000K 5000K 5000K WATTAGE 8W 8W 8W 8W 8W 8W Total system power consumption for 8W =10W K 3000K 4000K 4000K 5000K 5000K 13W 13W 13W 13W 13W 13W Total system power consumption for 13W =14.8W. LUMENS PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE. 10 SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. IES FILES ARE AVAILABLE UPON REQUEST

15 LED RANGE IP20 SELV High output energy efficient LED downlight. Unique Square trim adjustable downlight requiring a round ceiling cut out. Deep recessed black baffle LED downlight. Tilt adjustable and ultra low glare. Super bright 13W version available, a true alternative to dichroic. Die-cast construction in aluminium alloy MIN. MOUNTING DEPTH REQUIRED 110MM Polished Brushed Chrome Chrome 13W or 8W Japanese LED Module 50,000+ hour lifespan Super efficient optical control Comfort low glare output Max. 15% lumen depreciation after 40,000 hrs Power factor > 0.9 Supplied completely assembled with remote leading and trailing edge dimmable driver with power cord and moulded plug top CODE Code-SP-3K-8W Code-FL-3K-8W Code-SP-4K-8W Code-FL-4K-8W Code-SP-5K-8W Code-FL-5K-8W Code-SP-3K-13W Code-FL-3K-13W Code-VWFL-3K-13W Code-SP-4K-13W Code-FL-4K-13W Code-VWFL-4K-13W Code-SP-5K-13W Code-FL-5K-13W Code-VWFL-5K-13W BEAM ANGLE COLOUR TEMPERATURE 3000K 3000K 4000K 4000K 5000K 5000K WATTAGE 8W 8W 8W 8W 8W 8W Total system power consumption for 8W =10W K 3000K 3000K 4000K 4000K 4000K 5000K 5000K 5000K 13W 13W 13W 13W 13W 13W 13W 13W 13W Total system power consumption for 13W =14.8W. LUMENS (PER ONE LED) PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE. SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. IES FILES ARE AVAILABLE UPON REQUEST 11

16 LED RANGE IP54 SELV Recessed LED Downlight with deep specular reflector and clear tempered glass Recessed LED Downlight with frost polycarbonate cover for diffused wide light distribution W Japanese LED module Comfort low glare output Installation springs suitable for ceiling thickness of 30mm Manufactured from diecast aluminium alloy with polyester powdercoat finish Silicone gasket to seal against ceiling Supplied completely assembled with remote leading and trailing edge dimmable driver with power cord and moulded plug top Power factor > ,000+ hours lifespan CODE Code-3K Code-4K BEAM ANGLE COLOUR TEMPERATURE WATTAGE LUMENS WIDE 3000K 13W 950 WIDE 4000K 13W 1000 Total system power consumption for 13W = 14.8W PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE. 12 SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. IES FILES ARE AVAILABLE UPON REQUEST

17 LED RANGE IP54 SELV Recessed LED downlight with deep specular reflector and clear tempered glass Recessed LED downlight with frost polycarbonate cover for diffused wide light distribution W Japanese LED module Comfort low glare output Installation springs suitable for ceiling thickness of 30mm CODE Code-3K Code-4K BEAM ANGLE COLOUR TEMPERATURE WATTAGE LUMENS WIDE 3000K 22W 1800 WIDE 4000K 22W 1900 Manufactured from diecast aluminium alloy with polyester powdercoat finish Silicone gasket to seal against ceiling Supplied completely assembled with remote dimmable driver with power cord and moulded plug top Power factor > ,000+ hours lifespan Total system power consumption for 22W = 25W PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE. SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. IES FILES ARE AVAILABLE UPON REQUEST 13

18 LED RANGE IP65 SELV Round recessed LED downlight with very high lumen output due to brilliant optical control. Designed to visually integrate within planar ceilings. Frost polycarbonate cover for soft wide beam distribution W or 18W Japanese LED module Soft wide beam distribution Comfort low glare output Installation springs suitable for ceiling thickness of up to 20mm CODE K-13W K-13W BEAM ANGLE COLOUR TEMPERATURE WATTAGE WIDE 3000K 13W 1000 WIDE 4000K 13W 1050 Total system power consumption for 13W = 13.5W LUMENS Manufactured from die-cast aluminium alloy with polyester powdercoat finish Silicone gasket to seal against the ceiling Totally sealed unit with cable gland fitted for IP65 protection Supplied completely assembled with remote leading and trailing edge dimmable driver with power cord and moulded plug top Power factor > ,000+ hours lifespan Maximum 15% lumen depreciation after 40,000 hours K-18W K-18W WIDE 3000K 18W 1750 WIDE 4000K 18W 1900 Total system power consumption for 18W = 20W 14 SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. FOR DIMMING CONVERTER DRIVER OPTIONS. ADD SUFFIX AFTER THE CODE: /DSI Digital dimming (13W ONLY) /DALI Dimming (13W ONLY) IES FILES ARE AVAILABLE UPON REQUEST

19 LED RANGE IP44 SELV Square recessed LED downlight with frost polycarbonate cover for diffused wide light distribution x125 8W and 13W Japanese LED module Comfort low glare output Installation springs suitable for ceiling thickness of 30mm Manufactured from diecast aluminium alloy with polyester powdercoat finish Very low profile for shallow ceiling spaces Supplied completely assembled with remote leading and trailing edge dimmable driver with power cord and moulded plug top Power factor > ,000+ hours lifespan CODE K-8W K-8W K-13W K-13W BEAM ANGLE COLOUR TEMPERATURE WATTAGE LUMENS WIDE 3000K 8W 670 WIDE 4000K 8W 730 Total system power consumption for 8W =10W WIDE 3000K 13W 950 WIDE 4000K 13W 1000 Total system power consumption for 13W = 13.5W SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. IES FILES ARE AVAILABLE UPON REQUEST 15

20 LED RANGE IP10 Surface mounted LED downlight with an integral driver. Aluminium profile with a multi-directional tilting mechanism. Ideal where a remote driver is not practical or a ceiling cavity does not exist DUAL AXIS TILTING INTERNAL HOUSING IS ALWAYS BLACK PLEASE NOMINATE YOUR CHOICE OF TRIM COLOUR 25 x 25 ON TWO PLANES Black Brushed Aluminium CODE BEAM ANGLE COLOUR TEMPERATURE WATTAGE LUMENS 13W or 8W Japanese LED Module 50,000+ hour lifespan Super efficient optical control Comfort low glare output Aluminium and die-cast alloy construction Supplied completely assembled with integral 240V leading and trailing edge dimmable driver Max. 15% lumen depreciation after 40,000 hrs Power factor > SP-3K-8W FL-3K-8W SP-4K-8W FL-4K-8W SP-5K-8W FL-5K-8W SP-3K-13W FL-3K-13W VWFL-3K-13W SP-4K-13W FL-4K-13W VWFL-4K-13W SP-5K-13W FL-5K-13W VWFL-5K-13W K 3000K 4000K 4000K 5000K 5000K 3000K 3000K 3000K 4000K 4000K 4000K 5000K 5000K 5000K 8W 8W 8W 8W 8W 8W Total system power consumption for 8W =9.5W. 13W 13W 13W 13W 13W 13W 13W 13W 13W Total system power consumption for 13W =13.5W SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. IES FILES ARE AVAILABLE UPON REQUEST

21 EYECARE KIDS OPTOMETRIST - NSW AUSTRALIA 17

22 SEAFOLLY - CASTLE HILL NSW AUSTRALIA 18

23 LED RANGE IP20 SELV A brilliant optically controlled LED downlight widely used in shopping centres and retail outlets as an alternative to Metal Halide, available in adjustable or fixed version in two trim diameter Black Black MIN. MOUNTING DEPTH REQUIRED: 200MM TOTAL WEIGHT: KGS MIN. MOUNTING DEPTH REQUIRED: 200MM TOTAL WEIGHT: KGS 28W Japanese LED Module 30W total system power consumption, 36 or 47 Beam with no harsh cutoff and ultra low glare Super efficient optical control 50,000+ hour lifespan Max. 15% lumen depreciation after 40,000 hrs Power factor > 0.9 with active power factor correction Supplied completely assembled with non-dimmable driver with power cord and moulded plug top Quick connect driver is IP64 Die-cast aluminium alloy body Heatsink manufactured from custom developed aluminium alloy for better and faster heat dissipation Clear tempered glass NOTE: TRIM RINGS ARE AVAILABLE TO COVER LARGER CEILING HOLES. CODE Code-SP-3K Code-FL-3K Code-WFL-3K Code-SP-4K Code-FL-4K Code-WFL-4K Code-SP-5K Code-FL-5K Code-WFL-5K EASILY CONNECTS BEAM ANGLE COLOUR TEMPERATURE 3000K 3000K 3000K 4000K 4000K 4000K 5000K 5000K 5000K Total system power consumption for 28W =30W PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE. IP64 QUICK CONNECT 30W DRIVER WATTAGE 28W 28W 28W 28W 28W 28W 28W 28W 28W LUMENS AVAILABLE AS FIXED OR ADJUSTABLE FOR DIMMING CONVERTER DRIVER OPTIONS. ADD SUFFIX AFTER THE CODE: /DIM Trailing edge mains dimmable /DSI Digital dimming /DALI Dimming FOR MODEL OPTIONS. ADD SUFFIX AFTER THE CODE: /AD1 For 1 way adjustable to 35 /FX For fi xed IES FILES ARE AVAILABLE UPON REQUEST 19

24 LED RANGE IP20 SELV A brilliant optically controlled LED downlight for applications in shopping centres and retail outlets as an alternative to metal halide, but with advantages of no heat output, less power consumption and long life without maintenance MIN. MOUNTING DEPTH REQUIRED: 200MM TOTAL WEIGHT: KGS MIN. MOUNTING DEPTH REQUIRED: 200MM TOTAL WEIGHT: 1.570KGS Black Black 45W and 60W Japanese LED Module or 47 Beam with no harsh cutoff and ultra low glare Super efficient optical control 50,000+ hour lifespan Max. 15% lumen depreciation after 40,000 hrs Power factor > 0.9 with active power factor correction Supplied with remote 240V electronic control gear and quick connect harness Supplied completely assembled with non-dimmable driver with power cord and moulded plug top Quick connect driver (see picture below) Supplied with a single 60W driver is IP64 to protect the electronics from humidity, wet environments and moisture in air conditioned areas Die-cast aluminium alloy body Heatsink manufactured from custom developed aluminium alloy for better and faster heat dissipation Light weight for plaster ceiling NOTE: TRIM RINGS ARE AVAILABLE TO COVER LARGER CEILING HOLES. CODE Code-SP-3K-45W Code-WFL-3K-45W Code-SP-4K-45W Code-WFL-4K-45W Code-SP-5K-45W Code-WFL-5K-45W Code-SP-3K-60W Code-WFL-3K-60W Code-SP-4K-60W Code-WFL-4K-60W Code-SP-5K-60W Code-WFL-5K-60W BEAM ANGLE COLOUR TEMPERATURE 3000K 3000K 4000K 4000K 5000K 5000K WATTAGE 45W 45W 45W 45W 45W 45W Total system power consumption for 45W = 43.5W K 3000K 4000K 4000K 5000K 5000K 60W 60W 60W 60W 60W 60W Total system power consumption for 60W = 59W EASILY CONNECTS PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE. IP64 QUICK CONNECT 60W DRIVER LUMENS AVAILABLE AS FIXED OR ADJUSTABLE 20 FOR MODEL OPTIONS. ADD SUFFIX AFTER THE CODE: /AD1 For 1 way adjustable to 35 /FX For fi xed IES FILES ARE AVAILABLE UPON REQUEST

25 VODAFONE - CHATSWOOD NSW AUSTRALIA 21

26 LED RANGE IP20 SELV LED Recessed Adjustable Downlight utilising high efficiency optical control. Available with two popular beam angles for highlighting and spotlighting. Two way tilt adjustable for aiming flexibility., 36 or 47 Beam angle with no harsh cut-off and ultra low glare x x AVAILABLE IN 2 LIGHT AND 3 LIGHT. TRIMLESS VERSION ALSO AVAILABLE. INTERNAL HOUSING IS ALWAYS BLACK IS ALSO AVAILABLE IN 60W. REFER TO PAGE 20 FOR LUMENS. 20 x20 Black 28W Japanese LED Module 30W total system power consumption Super efficient optical control with ultra low glare 50,000+ hour lifespan CODE Code-SP-3K Code-FL-3K Code-WFL-3K BEAM ANGLE COLOUR TEMPERATURE 3000K 3000K 3000K WATTAGE 28W 28W 28W LUMENS Max.15% lumen depreciation after 40,000 hrs Power factor > 0.9 with active power factor correction Supplied with remote 240V electronic control gear and quick connect harness Supplied completely assembled with non-dimmable driver with power cord and moulded plug top Supplied with a single IP64 driver to protect the electronics from humidity, wet environments and moisture in air conditioned areas Heatsink manufactured from custom developed aluminium alloy for better and faster heat dissipation Code-SP-4K Code-FL-4K Code-WFL-4K Code-SP-5K Code-FL-5K Code-WFL-5K K 4000K 4000K 5000K 5000K 5000K Total system power consumption for 28W = 30W PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE. EASILY CONNECTS 28W 28W 28W 28W 28W 28W IP QUICK CONNECT 30W DRIVER 22 FOR DIMMING CONVERTER DRIVER OPTIONS. ADD SUFFIX AFTER THE CODE: /DIM Trailing edge mains dimmable /DSI Digital dimming /DALI Dimming IES FILES ARE AVAILABLE UPON REQUEST

27 LED RANGE IP20 SELV Recessed LED downlight with very high lumen output due to the brilliant optical control maintaining ultra low glare. Ideal applications include shopping centres and retail outlets as an alternative to Metal Halide but with advantages of no heat output, less power consumption and long life without maintenance. Approx. 65 beam. Recessed LED downlight with very high lumen output due to the brilliant optical control maintaining an ultra low glare. Ideal applications in shopping centres and retail outlets as an alternative to Metal Halide but with advantages of no heat output, less power consumption and long life without maintenance. UNIQUE SQUARE DOUBLE BATWING LIGHT OUTPUT UNIQUE SQUARE DOUBLE BATWING LIGHT OUTPUT x100 Black TOTAL WEIGHT: KGS MINIMUM MOUNTING DEPTH REQUIRED: 110MM CEILING RETENTION SYSTEM FOR CEILINGS UP TO 22MM 165x165 Black 28W Japanese LED Module 30W total system power consumption Unique square double batwing light output Approx. 65 beam Super efficient optical control with ultra low glare 50,000+ hour lifespan Max.15% lumen depreciation after 40,000 hrs Power factor > 0.9 with active power factor correction Supplied completely assembled with non-dimmable driver with power cord and moulded plug top Supplied with a single IP64 driver to protect the electronics from humidity, wet environments and moisture in air conditioned areas Heatsink manufactured from custom developed aluminium alloy for better and faster heat dissipation CODE VWFL-3K VWFL-4K COLOUR TEMPERATURE WATTAGE EASILY CONNECTS IP64 QUICK CONNECT 30W DRIVER LUMENS 3000K 28W K 28W W Japanese LED Module 62W total system power consumption Unique square double batwing light output Approx. 65 beam Super efficient optical control with ultra low glare 50,000+ hour lifespan Max. 15% lumen depreciation after 40,000 hrs Power factor > 0.9 with active power factor correction Supplied completely assembled with non-dimmable driver with power cord and moulded plug top Quick connect driver (see picture) Supplied with a single IP64 driver to protect the electronics from humidity, wet environments and moisture in air conditioned areas Heatsink manufactured from custom developed aluminium alloy for better and faster heat dissipation Optional IP44 Clear glass cover CODE VWFL-3K VWFL-4K COLOUR TEMPERATURE WATTAGE EASILY CONNECTS LUMENS 3000K 60W K 60W 5520 IP64 QUICK CONNECT 60W DRIVER Total system power consumption for 28W = 30W Total system power consumption for 60W = 62W IES FILES ARE AVAILABLE UPON REQUEST 23

28 SEAFOLLY - CASTLE HILL NSW AUSTRALIA 24

29 LED RANGE IP44 LED adjustable wallwasher with wide beam distribution for illuminating vertical displays in retail stores. Constructed in pressure die-cast aluminium with ventilated front housing and tempered safety glass. Features a positive adjustment mechanism x125 45W LED module Constructed from pressure die-cast aluminium alloy with pre-treatment and durable polyester powdercoat paint finish, corrosion resistant. Tempered glass diffuser CODE K K COLOUR TEMPERATURE WATTAGE 3000K 45W K 45W 2550 Total system power consumption for 45W = 43.5W LUMENS Remote mains LED non-dimmable IP64 driver with power cord Power factor > 0.95 with active PFC 50,000+ hours lifespan Maximum 15% lumen depreciation after 40,000 hours of operation IES FILES ARE AVAILABLE UPON REQUEST 25

30 LED RANGE IP40 Recessed LED downlight with low profile housing made of pressed steel with ventilation holes in the front and back. Reflectors in high purity aluminium with satin finish for soft illumination. Recessed adjustable and swivel downlights with Hi-Power LED for optimum performance, up to 40,000 hours lifespan and savings on energy and maintenance. Main body is made of injected ultra pure aluminium machined to shape. Remote LED driver supplied with each downlight for connection to 240v mains Black Chrome Brushed Chrome 35 Brushed Aluminium Brushed Aluminium V 350mA 3x1W Hi-Power LED Recessed fixed cabinet light for high power LED, low energy consumption and long life. Remote LED driver included. LED available in warm or cool white. 210 Lumens per watt v 350 ma 3x1W Hi-Power LED 240v 350 ma 4x1W Hi-Power LED 3x1W Hi-Power LED recessed downlight with adjustable, rotational trim complete with remote 240v driver. Available in warm or cool white. 210 Lumens per watt. 4x1W Hi-Power LED recessed downlight with with adjustable, rotational trim complete with remote 240v driver. Available in warm or cool white. 280 Lumens per watt. 26 IES FILES ARE AVAILABLE UPON REQUEST

31 LED RANGE IP20 SERIES 25 three circuit track for surface mounting or suspended applications. Can be cut to length on site without any special tools. Extruded aluminium profile Powdercoat paint Three separately switchable circuits Flat copper conductors 2.5mm2 Pre punched holes for direct fixing 2 holes per metre SERIES 25 TRACK v 16A Live end with left hand earth contact. Can be made right hand on site v 16A L coupler can be used for feed. 240v 16A : 36 Black: : V D E End cap with locking screw v 16A T coupler can be used for feed mm mm Suspension components Rod 1200mm mm Stainless Steel Wire 2000mm Long Gripple Loop Mounting clip for 7906 and mm v 16A Electrical coupler v 16A Straight coupler, can be used for feed v 16A X coupler can be used for feed v 16A Flexible coupler. Black Black IES FILES ARE AVAILABLE UPON REQUEST 27

32 LED RANGE IP43 Versatile LED track spotlight with fully adjustable 3-circuit track* mount for general lighting and product highlighting * 3-CIRCUIT TRACKS RECOMMENDED ARE SERIES 25 TRACKS SYSTEMS. ALSO COMPATIBLE WITH MANY COMMON EUROPEAN BRAND 3-CIRCUIT TRACKS Black BEAM COLOUR CODE ANGLE TEMPERATURE WATTAGE LUMENS 13W or 8W Japanese LED Module Power Factor > SP-3K-8W FL-3K-8W K 3000K 8W 8W Max.15% lumen depreciation after 40,000hrs 50,000+ hour lifespan Super efficient optical contol Comfort low glare output Clear tempered glass Die-cast aluminium alloy construction SP-4K-8W FL-4K-8W SP-5K-8W FL-5K-8W SP-3K-13W FL-3K-13W SP-4K-13W FL-4K-13W SP-5K-13W FL-5K-13W K 4000K 5000K 5000K 3000K 3000K 4000K 4000K 5000K 5000K 8W 8W 8W 8W Total system power consumption for 8W =9.5W 13W 13W 13W 13W 13W 13W Total system power consumption for 13W =13.5W SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. FOR MODEL OPTIONS. ADD SUFFIX AFTER THE CODE: /SM Surface Mount IES FILES ARE AVAILABLE UPON REQUEST

33 ROCKPORT - CHATSWOOD NSW AUSTRALIA 29

34 LED RANGE IP43 28W LED adjustable track* spotlight utilising high efficiency LED optical controlled design system and resulting in the maximum output of available light * 3-CIRCUIT TRACKS RECOMMENDED ARE SERIES 25 TRACKS SYSTEMS. ALSO COMPATIBLE WITH MANY COMMON EUROPEAN BRAND 3-CIRCUIT TRACKS. 350 Black Fully adjustable three circuit track mount 30W Japanese LED Module or 36 Beam with no harsh cut-off and ultra low glare Super efficient optical control 50,000+ hour lifespan Max. 15% lumen depreciation after 40,000 hrs Power factor > 0.9 with active power factor correction Supplied with 240V electronic integral non-dimmable driver Die-cast and extruded aluminium alloy construction Standard supplied with three circuit track adaptor Clear tempered glass lens BEAM COLOUR CODE ANGLE TEMPERATURE WATTAGE LUMENS SP-3K FL-3K WFL-3K SP-4K FL-4K WFL-4K SP-5K FL-5K WFL-5K K 3000K 3000K 4000K 4000K 4000K 5000K 5000K 5000K 30W 30W 30W 30W 30W 30W 30W 30W 30W Total system power consumption =30W FOR DIMMING CONVERTER DRIVER OPTIONS. ADD SUFFIX AFTER THE CODE: /DIM Leading and trailing edge mains dimmable FOR MODEL OPTIONS. ADD SUFFIX AFTER THE CODE: /SM Surface Mount IES FILES ARE AVAILABLE UPON REQUEST

35 LED RANGE IP20 60W LED Adjustable Track* Spotlight utilising high efficiency LED optical controlled design system and resulting in the maximum output of available light. CODE: * 3-CIRCUIT TRACKS RECOMMENDED ARE SERIES 25 TRACKS SYSTEMS. ALSO COMPATIBLE WITH MANY COMMON EUROPEAN BRAND 3-CIRCUIT TRACKS. 350 Black BEAM COLOUR CODE ANGLE TEMPERATURE WATTAGE LUMENS Fully adjustable three circuit track mount 60W Japanese LED Module or 47 Beam with no harsh cut-off and ultra low glare Super efficient optical control 50,000+ hour lifespan Max. 15% lumen depreciation after 40,000 hrs. Power factor > 0.9 with active power factor correction Supplied with 240V electronic integral non-dimmable driver Die-cast and extruded aluminium alloy construction Standard supplied with three circuit track adaptor Clear tempered glass lens SP-3K WFL-3K SP-4K WFL-4K K 3000K 4000K 4000K 60W 60W 60W 60W Total system power consumption = 60W FOR DIMMING CONVERTER DRIVER OPTIONS. ADD SUFFIX AFTER THE CODE: /DIM Leading and trailing edge mains dimmable FOR MODEL OPTIONS. ADD SUFFIX AFTER THE CODE: /SM Surface Mount IES FILES ARE AVAILABLE UPON REQUEST 31

36 LED RANGE IP54 Track Mounted LED Light for product highlighting, suitable for 3-circuit track*. Assembled with integral dimmable driver * 3-CIRCUIT TRACKS RECOMMENDED ARE SERIES 25 TRACKS SYSTEMS. ALSO COMPATIBLE WITH MANY COMMON EUROPEAN BRAND 3-CIRCUIT TRACKS. 360 Black BEAM COLOUR CODE ANGLE TEMPERATURE WATTAGE LUMENS 13W or 20W Japanese LED Module 13.5W or 20W total system power consumption, 36 and 52 beam reflectors with no harsh cut off and ultra low glare Die-cast aluminium alloy construction with polyester powdercoat Stainless steel fasteners Totally sealed unit with clear tempered glass Integral mains driver leading and trailing edge dimmable Power factor > ,000+ Hours lifespan Max. 15% Lumen depreciation after 40,000 Hrs SP-3K-13W FL-3K-13W SP-4K-13W FL-4K-13W SP-3K-18W FL-3K-18W WFL-3K-18W SP-4K-18W FL-4K-18W WFL-4K-18W K 3000K 4000K 4000K 3000K 3000K 3000K 4000K 4000K 4000K Total system power consumption = 20W 13W 13W 13W 13W Total system power consumption for 13W =13.5W 20W 20W 20W 20W 20W 20W SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. IES FILES ARE AVAILABLE UPON REQUEST FOR MODEL OPTIONS. ADD SUFFIX AFTER THE CODE: /SM Surface Mount

37 LED RANGE IP20 Fully Adjustable Professional LED Projector with integral 240V driver. Available as 3-circuit track* mounting or surface mounted versions * 3-CIRCUIT TRACKS RECOMMENDED ARE SERIES 25 TRACKS SYSTEMS. ALSO COMPATIBLE WITH MANY COMMON EUROPEAN BRAND 3-CIRCUIT TRACKS. 360 Black CODE BEAM ANGLE COLOUR TEMPERATURE WATTAGE LUMENS 30W or 60W Japanese LED Module or 47 Beam with no harsh cut-off and ultra low glare Super efficient optical control 50,000+ hour lifespan Max. 15% lumen depreciation after 40,000 hrs. Power factor > 0.9 with active power factor correction Manufactured from die-cast and extruded aluminium Standard supplied with fully adjustable 3-circuit track adaptor Clear tempered glass lens SP-3K WFL-3K SP-4K WFL-4K SP-5K WFL-5K SP-3K WFL-3K SP-4K WFL-4K K 3000K 4000K 4000K 5000K 5000K Total system power consumption = 30W 3000K 3000K 4000K 4000K Total system power consumption = 60W 30W 30W 30W 30W 30W 30W 60W 60W 60W 60W FOR DIMMING CONVERTER DRIVER OPTIONS. ADD SUFFIX AFTER THE CODE: /DIM Leading and Trailing edge mains dimmable FOR MODEL OPTIONS. ADD SUFFIX AFTER THE CODE: /SM For surface mount IES FILES ARE AVAILABLE UPON REQUEST 33

38 LED RANGE IP20 SELV High output energy efficient LED Pendant, with wide distribution reflector shade in anodised aluminium with matching interior finish. A brilliant optically controlled LED pendant ideal for shopping centres and retail outlet applications, over counters or merchandise. A great alternative to metal halide or halogen luminaires AVAILABLE ONLY IN 47 BEAM ANGLE Anodised 360 Black 13W or 28W Japanese LED Module Super efficient optical control 50,000+ hours lifespan Max. 15% lumen depreciation after 40,000 hrs Comfort low glare output Adjustable stainless steel wire suspension Power factor > 0.9 with active power factor correction Supplied with mains driver for remote mounting Supplied completely assembled with easy quick connect harness and 240V power cord and moulded plug top CODE Fixture is supplied with a 2.2m white cable harness and a 2 metre Gripple Stainless Steel Wire Suspension Kit. EASILY CONNECTS IP64 QUICK CONNECT 30W DRIVER STAINLESS STEEL SUSPENSION WFL-3K-13W WFL-4K-13W K 4000K 13W 13W SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER WFL-3K-28W WFL-4K-28W WFL-3K-28W BEAM ANGLE COLOUR TEMP WATTAGE Total system power consumption for 13W = 13.5W K 28W K 28W K 28W 2360 SUPPLIED WITH NON-DIMMABLE DRIVER. Total system power consumption for 28W = 30W LUMENS 28W Japanese LED Module Super efficient optical control 50,000+ hours lifespan Max. 15% lumen depreciation after 40,000 hrs Power factor > 0.9 with active power factor correction Supplied completely assembled with easy quick connect harness and 240V power cord and moulded plug top Die-cast aluminium alloy body Heatsink manufactured from custom developed aluminium alloy for better and faster heat dissipation. CODE SP-3K FL-3K WFL-3K SP-4K FL-4K WFL-4K SP-5K FL-5K WFL-5K BEAM ANGLE COLOUR TEMP 3000K 3000K 3000K 4000K 4000K 4000K 5000K 5000K 5000K Fixture is supplied with a 2.2m white cable harness and a 2 metre Gripple Stainless Steel Wire Suspension Kit. WATTAGE 28W 28W 28W 28W 28W 28W 28W 28W 28W Total system power consumption for 28W = 30W EASILY CONNECTS IP64 QUICK CONNECT 30W DRIVER STAINLESS STEEL SUSPENSION LUMENS FOR DIMMING CONVERTER DRIVER OPTIONS. ADD SUFFIX AFTER THE CODE: /DIM Trailing edge mains dimmable /DSI Digital dimming /DALI Dimming IES FILES ARE AVAILABLE UPON REQUEST

39 SHADES - ADELAIDE SA 35

40 LED RANGE IP10 SELV LED highbay with contemporary design features and styling, incorporating the latest LED Technology. Ideal for use in shopping areas, food areas and retail outlets Fixture is supplied with a 2.2m white cable harness and a 2m GRIPPLE Stainless Steel Wire Suspension Kit STAINLESS STEEL SUSPENSION Anodised CODE BEAM ANGLE COLOUR TEMPERATURE WATTAGE LUMENS 57W Japanese LED module K WIDE 3000K 60W W total sytem power consumption Super efficient optical control system for maximum light output 50,000+ hours lifespan Maximum 15% lumen depreciation after 40,000 hours Power factor > 0.9 with active power factor correction Supplied with a single 60W electronic driver. The driver has IP64 rating to protect the electronics from humidity, wet environments and moisture in air conditioning areas Driver is mounted remotely Spun aluminium reflector in matt anodised finish inside and outside K WIDE 4000K 60W 5520 Total system power consumption = 60W 36 IES FILES ARE AVAILABLE UPON REQUEST

41 LED RANGE IP44 SELV High output energy efficient LED highbay with excellent ambient and upward lighting. Bug free design with no UV or maintenance issues Fixture is supplied with a 2.2m white cable harness and a 2m GRIPPLE Stainless Steel Wire Suspension Kit STAINLESS STEEL SUSPENSION WHITE CABLE HARNESS Anodised CODE WATTAGE COLOUR TEMP BOTTOM VISOR IP RATING LUMENS 57W Japanese LED module W 4700K CLOSED IP W total system power 4700K colour temperature Super efficient wide light distribution 50,000+ hours lifespan Max. 15% lumen depreciation after 40,000 hrs. Power factor > 0.9 with active power factor correction Supplied assembled with easy connect harness on driver and 240V power cord and moulded plug Adjustable stainless steel wire suspension Remote electronic gear Heatsink manufactured from custom developed aluminium alloy for better and faster heat dissipation. Polycarbonate prismatic diffuser with bottom cover (code 71078) Polycarbonate prismatic diffuser without the bottom cover (code 71079) W 4700K OPEN Total system power consumption for 57W = 60W IP IES FILES ARE AVAILABLE UPON REQUEST 37

42 LED RANGE IP65 CUTTING POINT CUT BETWEEN COPPER DOTS Waterproof IP65 Flexible Side Emitting LED Strip Self-adhesive waterproof and flexible LED Strip for indoor and outdoor use. Soft and flexible PCB makes it possible to bend the strip into any shape Cut off possible every 3 LED position, allowing for different length requirements Suitable for back of signage, advertising, backlights, stairs, coves etc Emitting colour white, other colours on application Can be bent down to 30mm diameter Ultra super bright LEDs Low power consumption Up to 50,000 hour lifespan No maintenance IP65 weather protection Beam angle of 60 3M 200MP PEEL OFF SELF ADHESIVE BACKING CODE 7.2W/m in a five metre reel in warm white colour 7.2W/m in a five metre reel in cool white colour VOLTAGE 12V DC 12V DC COLOUR TEMPERATURE 3300K 4200K WATTAGE /m 7.2W 7.2W WATTAGE /5m reel 36W 36W 240V-12V-DC 5Amps/60W regulated power supply Power factor > 0.9 with active power factor correction. Rated IP64 with power cord and plug. Size 181x62x35mm with 1m power cord and 0.3m output cord. LUMENS /m LUMENS /5m reel LED QTY /5m reel IES FILES ARE AVAILABLE UPON REQUEST

43 7.2W LED RANGE IP W Waterproof IP65 Flexible SMD LED Strip Unique product, waterproof and flexible for outdoor and indoor use. 7.2W (RGB) Ultra super bright LEDs Low power consumption Soft and flexible PCB can bend to any shape Can be bent down to 30mm diameter Cut off possible every 3 LED position, allowing different length requirements Up to 50,000 hour lifespan. No maintenance RGB version available IP65 weather protection officially tested by TUV Beam angle of M 200MP PEEL OFF SELF ADHESIVE BACKING W/m in a five metre reel in cool white colour 7.2W/m in a five metre reel in warm white colour 7.2W/m in a five metre reel in flexible RGB 7.2W per metre = 30 LEDs per metre. 12V DC 14.4W/m in a five metre reel in warm white colour 14.4W/m in a five metre reel in cool white colour 14.4W per metre = 60 LEDs per metre. 12V DC ALSO AVAILABLE IN... Other fixed colours Red, Green, Blue and Yellow are available on request. RGB colour change is available for waterproof IP65 flexible SMD LED strip. CODE VOLTAGE 12V DC 12V DC 12V DC 12V DC 12V DC BEAM ANGLE COLOUR TEMPERATURE 3300K 4200K RGB 3300K 4200K WATTAGE /m 7.2W 7.2W 7.2W 14.4W 14.4W RGB controller (max load of 200 watts) with Wall Switch Mechanism and IR Remote Control RGB Power Repeater (max load of 100 watts) V-12V-DC 5Amps/60W regulated power supply Power factor > 0.9 with active power factor correction. Rated IP64 with power cord and plug. Size 181x62x35mm with 1m power cord and 0.3m output cord V-12V-DC 5Amps/60W regulated power supply This power supply driver will run 5 lengths of 5 metres each. IP67 Waterproof. WATTAGE /reel 36W 36W 36W 72W 72W LUMENS /m LUMENS /reel RGB Wall Switch Plate CLIPSAL compatible (plate not supplied) + MODE BRT IR Remote Control 5050 LED QTY p/m MODE SPEED R G B LED QTY p/reel IES FILES ARE AVAILABLE UPON REQUEST 39

44 VODAFONE STORE - CHATSWOOD NSW 40

45 7.2W 9.6W LED RANGE IP10 Non-waterproof Flexible Ribbon LED Self-adhesive LED strip for indoor use only 14.4W Beam angle of 120 Suitable for any indoor use only Ultra super bright LEDs Very low power consumption Up to 50,000 hour lifespan Length of 5 metres per reel. IP10 JOINING OR CUTTING TO SIZE 7.2W LED Strip can be joined or cut to size at interval of 33mm. 9.6W LED Strip can be joined or cut to size at interval of 50mm. 14.4W LED Strip can be joined or cut to size at interval of 50mm. 3M 200MP PEEL OFF SELF ADHESIVE BACKING W/m in a five metre reel - warm white W/m in a five metre reel - cool white CODE VOLTAGE 12V 12V 24V 24V 12V 12V BEAM ANGLE COLOUR TEMPERATURE 3300K 4200K 3300K 4200K 3300K 4200K W/m in a five metre reel - warm white WATTAGE /m 7.2W 7.2W 10.0W 10.0W 14.4W 14.4W WATTAGE /reel 36W 36W 50W 50W 72W 72W LUMENS /m W/m in a five metre reel - warm white W/m in a five metre reel - cool white 14.4W/m in a five metre reel - cool white 3528 LED quantity = 90 LEDs per metre LED quantity = 120 LED per metre LED quantity = 60 LED per metre. LUMENS /reel LED Qty/m LED Qty/m IES FILES ARE AVAILABLE UPON REQUEST 41

46 LED RANGE SELV ROHS Ideal for many applications such as displays, lighting effects to integral within a lighting fixture. Available in LED five colours. Ideal for many applications such as displays, lighting effects to integral within a lighting fixture. Miniature 1W LED module with built-in regulator RGB LED module with built-in regulator W Class LED module, available in 5 LED colours Requires 12V DC supply 120 Beam Angle Built in constant current regulator and controlling voltage drop Allows for up to 1.5V voltage drop without affecting brightness Thermally stable without additional heatsinking Supplied with 135mm cable stripped and tinned 2W Class LED module Requires 12V DC power supply 120 Beam Angle Built in constant current regulator and controlling voltage drop Allows for up to 1.5V voltage drop without affecting brightness Thermally stable without additional heatsinking Supplied with 200mm long cables. Ta max: 45 C CODE COLOUR FLUX LOAD VOLTAGE RANGE CODE COLOUR FLUX LOAD VOLTAGE RANGE K K R G B Warm Cool Red Green Blue 51 lm 51 lm 18 lm 36 lm 9 lm max. 1W max. 1W max. 1W max. 1W max. 1W CAN BE MOUNTED TO MOST SURFACES USING DOUBLE SIDED TAPE. IP64 POWER SUPPLY FOR UP TO 60PCS OF CODE VOLTAGE WATTAGE V-12V-DC 5Amps 60W Power Factor > 0.9 with active power correction. Size 181x62x35mm with 1m power cord and 0.3m output cord. FOR MORE DRIVER SELECTION SEE PAGE V V V V V POWER SUPPLY REGULATED RGB 51.3 lm max. 2W V CAN BE MOUNTED TO MOST SURFACES USING DOUBLE SIDED TAPE OR BY USING SCREWS. IP64 POWER SUPPLY CODE VOLTAGE WATTAGE V-12V-DC 5Amps 60W Power Factor > 0.9 with active power correction. Size 181x62x35mm with 1m power cord and 0.3m output cord. FOR MORE DRIVER SELECTION SEE PAGE POWER SUPPLY REGULATED 42 REMOTE DIMMING OPTIONAL CONTROLLERS: DALI - SWITCH DIM (MAX. 60W) 1-10V - DIM (MAX. 60W) IES FILES ARE AVAILABLE UPON REQUEST

47 LED RANGE IP67 SELV Miniature push-in recessed button style wall light or uplight with recessing tube. Ideal for illuminating stairs and walkways and for feature lighting. Miniature screw-in semi-recessed round button style. Can be used for wall, ceiling or uplighting. Ideal for illuminating stairs and walkways and for feature lighting BOTTOM VIEW 2x FIXING HOLES BUILT IN CONSTANT CURRENT CONTROLLER IMMUNE TO VOLTAGE DROP Brushed Stainless Steel BUILT IN CONSTANT CURRENT CONTROLLER IMMUNE TO VOLTAGE DROP Brushed Stainless Steel BUILT IN CONSTANT CURRENT CONTROLLER IMMUNE TO VOLTAGE DROP 25 Brushed Stainless Steel RUBBER RINGS TO FIT INSIDE PVC RECESSING TUBE 1 Watt LED module wide beam Fully sealed with epoxy resin for IP67 rated protection Manufactured from cast AISI 316 stainless steel and machined to shape, with brushed linished finish Designed with rubber rings to fit tightly into a 32mm orange PVC conduit or 25mm hole Connects to a 12V DC power supply, to be ordered separately Up to 50,000 hours lifespan CODE Code-WW Code-CW Code-B Code-R BEAM ANGLE 120 PVC RECESSING TUBE SUPPLIED WITH PVC RECESING TUBE FOR EASY INSTALLATION COLOUR TEMPERATURE 3000K RUBBER RINGS OPERATING VOLTAGE 12V DC K 12V DC 120 BLUE 12V DC 120 RED 12V DC 33 TO FIT INSIDE PVC RECESSING TUBE PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE. CODE 1 Watt LED module wide beam Fully sealed with epoxy resin for IP67 rated protection Manufactured from cast AISI 316 stainless steel and machined to shape, with brushed linished finish Designed in two pieces for surface mounted or semi-recessed applications The top screw down piece covers the screws resulting in an aesthetically pleasing design Connects to a 12V DC power supply, to be ordered separately Up to 50,000 hours lifespan IP20 POWER SUPPLY FOR UP TO TEN FIXTURES VOLTAGE WATTAGE V to 12V DC 10W POWER SUPPLY REGULATED FOR MORE DRIVER SELECTION SEE PAGE IES FILES ARE AVAILABLE UPON REQUEST 43

48 LED RANGE IP65 Recessed LED wall light with downward distribution to illuminate floors and pathways without glare x260 MOULDED INSTALLATION WELL SUPPLIED WITH EACH FITTING DIAGRAM SHOWS THE FITTING INSIDE THE MOULDED INSTALLATION WELL Black 6.6W Japanese LED module Manufactured from aluminium die-cast alloy Tempered diffuser glass Powdercoated finish in acid clean and polyester paint baked at 180 C Silicone seal with stainless steel fasteners Supplied with 240V input and integral LED dimmable driver Moulded installation well supplied with each fitting LED version for no maintenance, energy saving and up to 50,000 hours lifespan CODE COLOUR TEMPERATURE LEADING AND TRAILING EDGE MAINS DIMMABLE WATTAGE LUMENS INPUT VOLTAGE K 3000K 6.6W V K 4000K 6.6W V 44 IES FILES ARE AVAILABLE UPON REQUEST

49 LED RANGE IP40 SELV IP55 SELV Recessed wall light with remote driver for internal applications. Can be used as an uplighter or downlighter. Perfect for illuminating stairs and walkways. Recessed wall light with an asymmetric distribution for illuminating floors, stairs and walkways with minimal glare. Optional Solid Brass or Copper trims WITH FROSTED GLASS WITH CLEAR GLASS OPTIONAL RECESSING BLOCKOUT (#7890 see below) OPTIONAL TRIMS: Brushed Stainless Steel 100 x130 Brushed Stainless Steel Brass Copper 3.9W Japanese LED Module Built in constant current controller Requires remote 12V DC power supply to be ordered seperately Pressed zinc steel housing and polyester powdercoated in white Matt anodised high purity Alanod Aluminium reflector Concealed LED for reduced glare As standard supplied with Polycarbonate clear cover Choice of front trim finishes, white, silver or stainless steel 7890 OPTIONAL RECESSING BLOCKOUT FOR CONCRETE OR MASONARY WALLS. MADE FROM GALVABOND STEEL. TO BE ORDERED SEPERATELY CODE 3.9W Japanese LED module Reversible, can be used for uplighting or downlighting AISI 316 Stainless Steel construction Brushed Stainless Steel front trim Tempered 3mm glass lens Silicone rubber cable entry grommet Neoprene rubber seals for glass Stainless Steel fastener details COLOUR TEMPERATURE *PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE. WATTAGE LUMENS LINE VOLTAGE *Code-3K 3000K 3.9W V *Code-4K 4000K 3.9W V REMOTE DIMMING OPTIONS AVAILABLE: DALI - SWITCH DIM (MAX. 60W) 1-10V - DIM (MAX. 60W) IES FILES ARE AVAILABLE UPON REQUEST 45

50 INDOOR DRIVERS & CONTROL GEAR Constant voltage converter Universal input voltage range Constant output voltage Overtemperature and overload protection Short-circuit shutdown feature with automatic restart Protection class 2, SELV Type of protection IP20 Plastic casing white Low power loss High efficiency ,5 22,5 4,2 4, ,5 4,2 40,5 161, W 12V OR 24V DC 60W 12V OR 24V DC 100W 12V OR 24V DC INDOOR IP20 - REMOTE LCU INDOOR IP20 - REMOTE LCU INDOOR IP20 - REMOTE LCU Type LCU 035/12 E020 Output Voltage 12V DC Max. Load 35W Output Current Range A Type LCU 035/24 E020 Output Voltage 24V DC Max.Load 35W Output Current Range A Type Output Voltage Max. Load Output Current Range LCU 060/12 E020 12V DC 60W A Type LCU 060/24 E020 Output Voltage Max. Load 24V DC 60W Type LCU 100/12 E020 Output Voltage 12V DC Max. Load 100W Output Current Range A Type LCU 100/24 E020 Output Voltage 24V DC Max. Load 100W Output Current Range A 46

51 OUTDOOR DRIVERS & CONTROL GEAR Constant voltage converter Universal input voltage range Constant output voltage Connection: Cable with end sleeves (length approx. 500m) Metal casing, encapsulated Polarity identifiers, secondary +red/ black Short-circuit shutdown feature with automatic restart Overload protection by restricting output Overtemperature protection Type of protection IP67 Low power loss High efficiency SELV CODE: ,6 4-4,2 24,8 183, , ,6 221,6 4-4,2 24,8 227,6 215,6 4,2 32,8 192, , , W 12V DC OUTDOOR IP67 35W 12V DC OUTDOOR IP67 75W 12V OR 24V DC OUTDOOR IP67 100W 12V OR 24V DC OUTDOOR IP Type LCU 015/12 D010 Output Voltage 12V DC Max.Load 18W Output Current Range A Type LCU 035/12 D010 Output Voltage 12V DC Max.Load 35W Output Current Range A Type LCU 060/12 D010 Output Voltage 12V DC Max.Load 75W Output Current Range A Type LCU 060/24 D010 Output Voltage 24V DC Max.Load 60W Type LCU 100/12 D010 Output Voltage 12V DC Max.Input Power 100W Type LCU 100/24 D010 Output Voltage 24V DC Max.Input Power 100W 47

52 CUE - WESTFIELD LIVERPOOL NSW

53 METAL HALIDE RANGE CHAPTER NAME 49 61

54 METAL HALIDE RANGE IP44 SCOOP MINI is a compact adjustable downlighter offers reflector options to provide spot and floodlighting for display lighting applications. Constructed in die-cast aluminium with heat resistant powdercoat paint finish. The lamp housing is supported by a mechanism that provides smooth positive aiming and incorporates a solid heatsink for heat dissipation from around the lampholder. SCOOP is a recessed adjustable downlighter with wide beam distribution for floodlighting vertical displays. The lamp housing features a solid finned heatsink to facilitate heat dissipation and a smooth positive tension mechanism for the angular adjustment. Constructed in pressure die-cast aluminium for defined styling and high purity aluminium reflector with anodised protection Black Black V 20W or 35W CDM-TC G8.5 35º MEDIUM FLOOD v 35W or 70W CDM-TC G8.5 40º MEDIUM FLOOD V 20W or 35W CDM-TC G8.5 Adjustable downlight supplied with remote electronic control gear. 60º FLOOD v 35W or 70W CDM-TC G8.5 Adjustable downlight supplied with remote electronic control gear. 60º FLOOD OPTIONAL GOLD REFLECTOR AVAILABLE BACK VIEW OPTIONAL GOLD REFLECTOR AVAILABLE BACK VIEW 50

55 METAL HALIDE RANGE IP40 SCOOP MAJOR recessed adjustable downlighter with wide beam distribution for floodlighting vertical displays. The lamp housing features a solid finned heatsink to facilitate heat dissipation and a smooth positive tension mechanism for the angular adjustment. Constructed in pressure die-cast aluminium for defined styling and high purity aluminium reflector with anodised protection Black v 150W CDM-T G12 Recessed adjustable and rotational downlight supplied with remote electronic control gear. Above codes supplied with 67 reflector as standard. 67º FLOOD BACK VIEW 51

56 CUE - WESTFIELD LIVERPOOL NSW 52

57 METAL HALIDE RANGE IP40 OPTOR is a recessed adjustable downlighter for lighting vertical displays and features. Constructed in pressure die-cast aluminium for defined styling. The Optor features high purity aluminium reflector with anodised protection, with twist off front trim which allows for easy relamping. The Optor is multi-axis tilt adjustable x Black v 35W-70W CDM-T G12 Adjustable downlighter with remote electronic control gear and wide beam reflector. 50º v 20W-35W-70W CDM-R111 Gx8.5 Adjustable downlighter with remote electronic control gear. Lamps available in 15, and 40 beam angles. BACK VIEW 05 Black finish 01 finish 53

58 CUE - WESTFIELD LIVERPOOL NSW 54

59 METAL HALIDE RANGE IP10 QUAD is an aperture downlighter with one way tilt adjustment for directional lighting with minimal glare. The Quad features ceramic metal halide reflector lamps with precise spot and medium flood beams, this luminaire is fabricated from pressed steel with rigid trim and powdercoat paint finish. ROTA is a multidirectional downlighter with twin gimble rings and trim produced completely in pressure die-cast aluminium x x v 35W CDM-R E27 240v 35W CDM-R E v 70W CDM-R E27 Recessed adjustable downlight supplied with electronic remote control gear. One way internal tilt v 70W CDM-R E27 Round multi-adjustable downlight supplied with electronic remote control gear.positive ceiling retention up to 50mm. IP40 TONDA Die-cast aluminium construction Ventilated frame design High purity aluminium reflector Tempered UV glass cover No-tool lamp replacement Add suffix HF to order code for electronic control gear V 70W Rx7s 160 Miniature fixed downlight. Supplied with matching remote magnetic control gear Black V 70W Rx7s Recessed fixed downlight. Supplied with matching remote magnetic control gear V 150W Rx7s Recessed fixed downlight. Supplied with matching remote magnetic control gear. Black Polished Chrome 55

60 METAL HALIDE RANGE IP20 IP40 ARDON recessed downlight features a square trim with a regressed black mask and circular reflector, economical double ended metal halide lamps and remote control gear makes it ideal for retail applications. Frame and trim are formed in pressed steel with powdercoat paint finish; supporting a clear tempered glass cover which is easily removed without tools for easy lamp replacement. The reflector is a matt anodised aluminium for even illumination. ALTA is an adjustable wallwasher with wide beam distribution for illuminating vertical displays in retail stores. Constructed in pressure die-cast aluminium. The Alta features a ventilated front housing, tempered safety glass, a positive adjustment mechanism and no tool lamp replacement x x130 Black v 200W R7s 118mm Downlight for halogen lamp v 300W R7s 118mm Adjustable wall washer for 115mm halogen lamp v 35W Rx7s v 70W Rx7s v 70W Rx7s v 150W Rx7s Downlight with remote magnetic control gear. Add suffix HF to order code for electronic control gear v 150W Rx7s Supplied with matching remote magnetic control gear. Add suffix HF to order code for electronic control gear. 56

61 METAL HALIDE RANGE IP43 IP43 PIATTA is a recessed downlight for linear metal halide lamp. Features clear glass cover and matt silver reflector system. PIATTO is a series of square recessed downlights, available in multiple designs and lamp options. Manufactured from pressure die-cast aluminium with powdercoat paint finish. The Piatto features aluminium reflectors with a diffused or specular finish and tempered glass covers. This luminaire is supplied with remote matching standard control gear or optional electronic ballasts x x v 70W Rx7s Downlight supplied with remote magnetic control gear v 70W Rx7s Metal Halide v 150 Rx7s Metal Halide Downlight with matching remote magnetic control gear. 57

62 METAL HALIDE RANGE IP10 CEPLEX is a series of recessed multiple downlighters with independant aiming that are ideal for retail and feature lighting applications. Utilising metal halide PAR30 reflector lamps, the Ceplex allows the designer to incorporate both flood and spot beam options into the fixture. The Ceplex is fabricated from pressed steel with powdercoat paint finishes; the twin gimble rings are in pressure die-cast aluminium with matt black interior finish. Add suffix HF to the order code for optional electronic control gear x35 170x x35 170x v 35W to 70W CDM-R E27 Single or multiple downlighters with remote magnetic control gears. Add suffix HF to the order code for optional electronic control gear x35 170x x35 320x320 CEILING RETENTION SYSTEM FOR CEILINGS UP TO 40MM. M. 58

63 METAL HALIDE RANGE IP10 DEPLEX is a series of recessed multiple downlighters utilising low glare reflector lamps with ceramic metal halide light sources and high frequency electronic control gear. Each lamp can be independently aimed with a choice of spot or medium flood beam spreads. The Deplex is produced using a formed steel body and frame with die-cast aluminium multi adjustable rings. Interior colour is available in matt black only x x x x x x v 20W to 70W CDM-R111 Single or multiple downlighters with remote electronic control gears. CEILING RETENTION SYSTEM FOR CEILINGS UP TO 40MM. 59

64 METAL HALIDE RANGE IP20 VELUX are a series of multidirectional downlighters that utilise ceramic metal halide lamps in combination with faceted reflectors. The trims and gimble rings are produced using pressure die-cast aluminium, whilst its housings are pressed steel with black interior finish to minimise spill light. Clip-in tempered glass lens is easily removed for quick relamping. Strong and positive screw down ceiling retention system for celings up to 40mm are available x x x x x x v 35W to 150W 1xG12 Recessed single downlighters supplied with magnetic matching control gear. Add suffix HF for optional electronic control gear. 240v 35W to 150W 2xG12 Recessed single downlighters supplied with magnetic matching control gear. Add suffix HF for optional electronic control gear. POSITIVE SCREW DOWN CEILING RETENTION SYSTEM FOR CEILINGS UP TO 40MM. 240v 35W to 150W 3xG12 Recessed single downlighters supplied with magnetic matching control gear. Add suffix HF for optional electronic control gear. 60

65 SUVA - TAPOO SHOPPING CENTRE - FIJI 61

66 FITNESS FIRST - NSW AUSTRALIA

67 PENDANTS 63 65

68 PENDANTS IP10 KONO 40 Pendant downlighter features an extruded aluminium gear housing, and a prismatic polycarbonate reflector that provides efficient direct and indirect light output from a selection of lamp options. The Kono is ideal for industrial areas, high ceiling applications, retail spaces and warehouse areas FIXTURE IS SUPPLIED WITH 1200MM OF BLACK SILICONE CABLE AND HOOK BUT WITHOUT CHAIN OR WIRE SUSPENSION v 60W-75W-100W-150W E27 Halogen Open pendant downlighter for mains halogen lamps allow for economical dimming control v E27 ES Fluorescent Without control gear v 1 x 26W PLC-E G24q v 2 x 26W PLC-E G24q v 1 x 32W PLT-E G24q v 2 x 32W PLT-E G24q v 1 x 42W PLT-E G24q v 2 x 42W PLT-E G24q-4 Open downlighter with integral electronic non dimmable control gear v 70W HQI-E E v 100W HQI-E E v 150W HQI-E E27 Pendant with 40cm high temperature prismatic polycarbonate reflector and integral non dimmable magnetic control gear OPTIONS 7284 OPTIONAL POLYCARBONATE COVER AND METAL LOCKING RING FOR 400MM FOR IP44 PROTECTION 64 CONTROL GEAR OPTIONS FOR COMPACT FLUORESCENT LAMPS ADD SUFFIX: - /HF Electronic non dimming. /AD Analogue dimming. /DSI Digital dimming. /DALI Addressable dimming.

69 PENDANTS IP10 IP20 CIRCUS pendant downlighter features a clear prismatic reflector shade in heat resistant polycarbonate to give both direct and indirect illumination while diffusing the light source. OCEAN pendant downlighter is produced using extruded and pressure die-cast aluminium. The ventilated lamp housing ensures optimum performance from a selection of energy saving lamps while the cover glass with frosted edge provides low glare control and lamp protection. Twin stainless steel wires with clutch fixings provide full and easy on site adjustment of the suspension height. The Ocean is powdercoated in silver with white glass reflector. Alternative colour glass and reflector styles are also available v 100W E27 halogen v 20W E27 fluorescent Control gear NOT required v 70/100W HQI-E Pendant supplied with matching remote magnetic control gear v 150W E27 halogen OC32-F42-WII 240v 42W PLT G24q-4 Open pendant downlight with integral electronic control gear. 240v 23W E27 fluorescent Control gear NOT required v 70W/100W/150W HQI-E Pendant supplied with matching remote magnetic control gear OPTIONAL POLYCARBONATE COVER FOR 300MM IP OPTIONAL POLYCARBONATE COVER FOR 400MM IP44 OC32-C70-WII 240v 70W CDM-T G12 OC32-C15-WII 240v 150W CDM-T G12 Integral electronic control gear. WHITE GLASS REFLECTOR Standard colours are silver body and white hand blown glass reflector. Customised colours and combinations for corporate identity schemes can be supplied to special order. 65

70 JEANSWEST - NSW AUSTRALIA

71 12V DOWNLIGHTS & SPOTLIGHTS 67 79

72 12V DOWNLIGHTS IP20 MAESTRO is a recessed fixed downlight produced in pressure die-cast aluminium. This fitting features a twist and lock front ring, allowing for quick and easy lamp replacement and comes with a ceramic lampholder and high temperature leads to be connected to a 12V transformer. MAESTRO is also available as an adjustable recessed downlight. AVION series of recessed adjustable downlights features 355 of rotational movement for a complete directional lighting solution. CODE: Black Chrome Brushed Black Chrome Brushed Black Chrome Brushed Chrome Chrome Chrome 12v 20W - 50W OR 4W - 10W LED Downlight with clear glass UV lens for general applicatons MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION. 12v 20W - 50W OR 4W - 10W LED Downlight with clear glass UV lens and 2-way tilt adjustable lamp positioning v 20W - 50W OR 4W - 10W LED Compact size recessed adjustable and rotatable downlight with removable centre for easy relamping, in die-cast aluminium alloy. IP20 PACER adjustable wall washers for highlighting vertical displays and wall features. Constructed in pressure die-cast aluminium and finished in a range of colours to suit modern interiors Black 35 12v 20W - 50W OR 4W - 10W LED Chrome Brushed Chrome x Black 56 12v 20W - 50W OR 4W - 10W LED Chrome Brushed Chrome Black 12v 20W - 50W OR 4W-10W LED Chrome Brushed Chrome 68 Adjustable and rotatable wall washer supplied with ceiling fixing ring to allow easy removal for lamp replacement. Adjustable wall washer with square trim and removeable front plate for easy lamp replacement. Adjustable wall washer with round trim constructed in pressure die-cast aluminum with removeable front trim for easy lamp replacement. MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION.

73 12V DOWNLIGHTS IP20 SLIDE is an adjustable recessed downlight with smooth positive adjustment system for directional aiming on to features and displays for maximum impact. The robust lamp housing is supported by a steel rail providing axial and rotational movement. Engineered in pressure die-cast aluminium alloy. Slide is available a range of quality finishes to compliment any interior. BLIZZARD recessed downlights feature a removeable inner reflector that allows easy lamp replacement with optional finishes to suit most interiors. The Blizzard is manufactured using die-cast aluminium and powdercoat finished. Remote transformer is required POSITIVE ADJUSTMENT SYSTEM Black v 20W - 50W OR 4W - 10W LED Recessed adjustable and downlight requiring remote transformer. 90 Chrome Brushed Chrome 80 Chrome v 20W - 50W OR 4W - 10W LED 12v 20W - 50W OR 4W - 10W LED Low glare effect compact downlight with specular aluminium reflector. Low glare effect compact downlight with white aluminium reflector. MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION. IP40 DIXI series of recessed downlights featuring a low profile trim for a flush look finish on the ceiling. The regressed lamp position and integral black baffle provide low glare lighting to any interior, while the matt white finish can be overpainted to match the ceiling colour if required v 20W - 50W OR 4W - 10W LED Fixed pinhole downlight provides low glare ambient lighting. Chrome Brushed Chrome OPTIONAL ALUMINIUM RECESSING RING v 20W to 50W Aluminium recessing ring to line the penetration in plasterboard ceilings, allowing easier relamping and protecting the ceiling. Creates a shadowline detail between the ceiling and trim v 20W - 50W OR 4W - 10W LED Chrome Brushed Chrome Adjustable keyhole downlight allows directional lighting onto features and walls. 69 MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION.

74 12V DOWNLIGHTS IP10 TOAST downlights with their unique shape provide wash lighting onto walls and vertical features and displays. With an extended lamp mounting arm for easy tilt adjustment of the lamp. Toast is available in twin lamp or single fixed downward aiming lamp and single adjustable. Remote transformer is required r= r= v 20W - 50W OR 4W - 10W LED Single adjustable lamp with all white finish v 2x20W - 50W OR 4W-10W LED Recessed downlighters with all white finish. Double lamp with one adjustable r=38 12v 20W - 50W OR 4W-10W LED 161 Single adjustable lamp with black interior Chrome Brushed Chrome r=38 12v 2 x 20W - 50W OR 4W-10W LED Recessed downlighters with black interior & optional trim colours. Double lamp with one adjustable Chrome Brushed Chrome 70 MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION.

75 12V DOWNLIGHTS IP20 MODTRIM downlights are designed to visually integrate within white planar ceilings while providing low glare illumination; due to the deep conical housing with minimal trim width and thickness. The lamp is securely retained by a spring loaded lampholder on to a thermally isolated seat allowing for quick lamp replacement. Formed in die-cast and spun aluminium and powdercoat paint finished. The Modtrim features a ceramic lampholder with teflon insulated leads and connection block MODTRIM MODWAY v 20W - 50W OR 4W - 10W LED Fixed recessed downlight requiring a remote transformer v 20W - 50W OR 4W - 10W LED Adjustable recessed downlight requiring a remote transformer. SHANGHAI STORIES - NSW AUSTRALIA MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION. 71

76 12V DOWNLIGHTS IP66 WET is a range of downlights for use in applications that require various degrees of protection from the elements. Wet s IP66 rating makes it suitable for use under the eaves of rooves, awnings, laundries, bathrooms and above shower cubicles. Wet is constructed from pressure die-cast aluminium and powdercoat paint finish with silicone seals for added durability. Remote transformer is required IP66 85 IP66 IP v 20W - 50W OR 4W - 10W LED Recessed downlight with feature glass trim in frost with clear centre. Ideal for bathrooms and saunas. Special ceiling clips that require a screwdriver for positive and tight fit to the ceiling. Silicone seal for IP66 prevents splashes of water from entering. Suitable for ceiling thickness up to 20mm v 20W - 50W OR 4W - 10W LED Recessed downlight with domed feature glass trim in frost with clear centre. Suitable for ceiling thickness up to 20mm v 20W G4 Semi recessed downlight with frost glass enclosed diffuser, body made from polycarbonate plastic. Heat resistant and flame proof with silicone seal. IP20 MINI SCAN tilt adjustable downlight/wallwasher with pleated reflector in a selection of finishes. Pressure die-cast aluminium trim has twist off action to allow for easy lamp replacement and simple installation. Can be used as a downlight or wall washer with a 20 adjustable tilt action v 20W - 50W OR 4W - 10W LED Tilt adjustable downlight with pleated specular reflector. Requires remote transformer MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION.

77 12V DOWNLIGHTS IP65 WET range of downlights are for use in various applications where protection from the ingress of moisture is required, like in food service areas. Fittings are rated at IP54 and above, and feature silicone seals for durability. Remote transformer is required IP54 77 IP54 77x77 IP65 70 Chrome Brushed Chrome v 20W to 50W Recessed downlight with frost glass sealed into a round aluminium die-cast trim, easily removed for relamping, and polycarbonate body v 20W to 50W Recessed downlight with frost glass sealed into a square aluminium die-cast trim and polycarbonate body v 20W - 50W OR 4W - 10W LED Recessed downlight with regressed lamp. Die-cast aluminium construction with sealed frost glass lens v 20W - 50W OR 4W - 10W LED The protective cover is to restrict the entry of flammable materials into the lamp and complies to new electrical standards AS/NZ: IP65 Recessed downlight for wet areas. Die-cast aluminium construction with sealed frosted glass lens for diffused light distribution. IP65 MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION. 85 Chrome Brushed Chrome 73

78 12V DOWNLIGHTS IP20 RIGA display downlighters offer single or multiple downlights with independant adjustment between fixtures. Housing and trims are constructed from steel and machined aluminium with powdercoat black interior paint finish x x x310 12v 20W - 50W OR 4W - 10W LED Single, twin recessed downlights, with independent aiming. Internal housing is always in matte black. Installation springs suitable for ceiling thickness up to 20mm. MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION. IP10 QUAD series of recessed downlights with single lamp provide directional illumination with minimal glare. Housings in pressed steel with black interior finish to reduce spill light. Steel trims with powdercoat paint finish. Ceramic lampholder is mounted on a removeable spring clip for easy relamping v 20W - 50W OR 4W - 10W LED Tilt adjustable downlight to fit round hole ceiling penetration MM ROUND HOLE CUT OUT REQUIRED MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION.

79 SUPRE - CHATSWOOD NSW 75

80 12V SPOTLIGHTS IP10 COMET is a spotlight with open lamp housing allowing for complete adjustment on to displays and features Black v 20W - 50W OR 4W - 10W LED Surface mount spotlight requiring remote transformer ME 12v 20W - 50W OR 4W - 10W LED Spotlight with Electronic three circuit track adaptor, and integral electronic transformer. To be used on Series 25 Track EB 12v 20W - 50W OR 4W - 10W LED Spotlight with integral electronic transformer in the base FM 12v 20W - 50W OR 4W - 10W LED Spotlight with flush base requiring remote transformer ET 12v 20W - 50W OR 4W - 10W LED Spotlight with electronic single circuit track adaptor, for BT Track, and integral electronic transformer. 76 MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION.

81 12V SPOTLIGHTS IP10 SHROUD is a spotlight with metal lamp housing minimising spill light from the reflector lamp Black ME EB 12v 20W - 50W OR 4W - 10W LED 12v 20W - 50W OR 4W - 10W LED 12v 20W - 50W OR 4W - 10W LED Surface mount spotlight requiring remote transformer. Spotlight with Electronic three circuit track adaptor, with integral electronic transformer. To be used on Series 25 Track. Spotlight with integral electronic transformer in the base FM 12v 20W - 50W OR 4W - 10W LED Spotlight with flush base requiring remote transformer ET 12v 20W - 50W OR 4W - 10W LED Spotlight with electronic single circuit track adaptor, for BT Track, with integral electronic transformer. MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION. 77

82 12V SPOTLIGHTS IP10 SHOOTER is an adjustable spotlight in pressure die-cast aluminium with powdercoat paint finish. The Shooter features a mesh for ventilation on the back of the housing which allows easy heat dissipation Black v 20W - 50W OR 4W - 10W LED Surface mount spotlight requiring remote transformer ME 12v 20W - 50W OR 4W - 10W LED Spotlight with Electronic three circuit track adaptor and integral electronic transformer. To be used on Series 25 Track EB 12v 20W - 50W OR 4W - 10W LED Spotlight with integral electronic transformer in the base FM ET 12v 20W - 50W OR 4W - 10W LED Spotlight with flush base requiring remote transformer. 12v 20W - 50W OR 4W - 10W LED Spotlight with electronic single circuit track adaptor and integral electronic transformer. 78 MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION.

83 12V SPOTLIGHTS IP10 KUBE spotlight with ventilated housing and mesh enable flow through heat dissipation. The Kube is produced in pressure die-cast aluminium with powdercoat paint finish Black v 20W - 50W OR 4W - 10W LED Surface mount spotlight requiring remote transformer ME 12v 20W - 50W OR 4W - 10W LED Spotlight with Electronic three circuit track adaptor and integral electronic transformer. To be used on Series 25 Track EB 12v 20W - 50W OR 4W - 10W LED Spotlight with integral electronic transformer in the base FM ET 12v 20W - 50W OR 4W - 10W LED Spotlight with flush base requiring remote transformer. 12v 20W - 50W OR 4W - 10W LED Spotlight with electronic single circuit track adaptor and integral electronic transformer. MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION. 79

84 NORWEST PRIVATE HOSPITAL, BELLA VISTA NSW

85 FLUORESCENT LIGHTING 81 85

86 FLUORESCENT DOWNLIGHTS ASTRO & ASTRO MAXI recessed downlights provide a comprehensive range of reflector and lamp solutions to suit most applications. Their unique design allows for compact sizing with easy installation and relamping, made simple due to the tiltable lampholder module with remote gear set. The main body is formed in moulded polycarbonate with painted steel framework and high purity aluminium reflectors with various finishes. Glass accessories and dimming control gear options extend their versatility for use in offices, corridors, foyers and retail environments. ASTRO ASTRO MAXI Control Gear 200 x Control Gear 200 x AS v 2x13W PLC G24q-1 ASM v 2x18W PLC G24d-1 AS v 1x18W PLC G24q-2 ASM v 1x26W PLC G24q-3 AS v 2x18W PLC G24q-2 Downlight with remote electronic control gear. ADD SUFFIX FOR REFLECTOR OPTION : FR IP54 LGL MR MTR VLGB ASM v 2x26W PLC G24d-2 Downlight with remote electronic control gear. ADD SUFFIX FOR REFLECTOR OPTION : FR IP54 LGL MR MTR VLGB ASM v 2x32W PLT G24q-3 ASM v 2x42W PLT G24q-4 Downlight with remote electronic control gear. ADD SUFFIX FOR REFLECTOR OPTION : FR IP54 LGL MR MTR VLGB 82 CONTROL GEAR OPTIONS FOR BOTH ASTRO AND ASTRO MAXI ADD SUFFIX : - AD Analogue dimming DSI Digital dimming DALI Addressable dimming EM Remote emergency pack for one lamp

87 FLUORESCENT DOWNLIGHTS STAINLESS STEEL CLIPS MAKE IT EASY TO INSTALL GLASS DIFFUSERS AND ALLOW FOR DIFFUSER TO BE INSTALLED AFTER THE FIXTURE HAS BEEN FITTED. FR FACETED REFLECTOR WITH SPECULAR FINISH. IP54 FROST GLASS WITH SILICONE SEAL & TRIM. TILTABLE LAMPHOLDER FOR EASY RELAMPING LGL WHITE LOUVRE FOR LOW GLARE LIGHTING. MR MIRROR REFLECTOR. REMOTE GEAR SET MTR MATT REFLECTOR FOR SOFT ILLUMINATION. VLGB BAFFLE WITH IP44 DIFFUSER. GLASS ACCESSORIES FOR ASTRO & ASTRO MAXI A variety of glass accessories are available for light diffusion, for a decorative effect or for IP rating. Glasses are able to be installed flat to the trim or as a floating glass by means of 3 strainless steel spring clips supplied with each glass accessory. ASTRO ASTRO MAXI IP44 IP A 157mm Frost Glass IP B 157mm Prismatic Glass IP44 ASTRO 74037A 181mm Frost Glass IP B 181mm Prismatic Glass IP A 197mm Frost Glass IP B 197mm Prismatic Glass IP44 ASTRO MAXI 74156A 220mm Frost Glass IP B 220mm Prismatic Glass IP20 83

88 FLUORESCENT DOWNLIGHTS IP20 ASTERIX recessed miniature downlights utilise compact flourescent lamps to provide ambient lighting into interiors where energy conservation is a major criteria. Available in two sizes; both with faceted aluminium reflectors to optimise efficiency v 13W PLT-E GX24q-1 Recessed, non dimmable downlight with integral electronic ballast v 18W PLT-E GX24q-2 Recessed, non dimmable downlight with integral electronic ballast. IP65 FIX recessed miniature downlight use compact fluorescent lamps. The trim is manufactured from precision cast alloy, whilst the steel housing is powdercoated black. Ventilation holes allow for rapid heat dissipation. Features: Square edge twist and lock trim Decorative glass accessories Integral electronic ballast High output reflector Easy two spring installation Supplied with power cord Outer black cover 240V 1 x 18w PLT-E Gx24q-2 Recessed downlight with integral electronic non dimmable ballast V 1 x 18w PLT-E Gx24q-2 Recessed downlight with integral electronic non dimmable ballast and feature glass ring IP65 IP65 SPRING SYSTEM FOR UP TO 25MM CEILING THICKNESS. 240V 1 x 18w PLT-E Gx24q-2 IP65 VERSION IS IDEAL FOR USE IN WET AREAS, BATHROOMS, UNDER AWNINGS AND FOOD PREPERATION AREAS. 92 Brushed Chrome Recessed downlight with integral electronic non dimmable ballast. Tempered frosted glass lens and sillicone rubber seal with IP65 protection. 84

89 FLUORESCENT DOWNLIGHTS IP44 Asymmetrical wall washer designed to provide a wide and uniform coverage from top to bottom. This fitting is manufactured from die-cast aluminium and finished in durable polyester powdercoat finish. Reflectors are made of 99.98% pure aluminium which are anodised clear HIGH EFFICIENCY ALUMINIUM MIRROR REFLECTOR V 2x18W PLC-E G24q-2 Recessed downlight wall washer type with plain mirror reflector and clear tempered glass and remote HF electronic control gear V 2x26W PLC-E G24q-3 Recessed downlight wall washer type with plain mirror reflector and clear tempered glass and remote HF electronic control gear. IP43 PIATTA recessed downlights featuring frost glass diffuser and specular trim reflectors for low glare and wide light distribution. Bezel formed in precision die-cast aluminium with powdercoat paint finish and steel frame. Pressed aluminium reflectors with silver metalized coating for high reflectivity V 2x13W PLC G24d-1 13W Downlight with remote magnetic control gear. Add suffix HF for electronic control gear option V 2x18W PLC G24d-2 18W Downlight with remote magnetic control gear. Add suffix HF for electronic control gear option. 170x170 85

90 SEAFOLLY - NSW AUSTRALIA

91 TRACK LIGHTING

92 HUNT LEATHER - QLD 88

93 TRACK LIGHTING IP20 SERIES 25 three circuit track for surface mounting or suspended applications. Can be cut to length on site without any special tools. Extruded aluminium profile Powdercoat paint Three separately switchable circuits Flat copper conductors 2.5mm2 Pre punched holes for direct fixing 2 holes per metre SERIES 25 TRACK v 16A Live end with left hand earth contact. Can be made right hand on site by reversing tag v 16A L coupler can be used for power feed v 16A : Black: : V D E End cap with locking screw. 240v 16A T coupler can be used for power feed mm mm Suspension components mm Rod 1200mm mm Stainless Steel Wire 2000mm Long Gripple Loop Mounting clip for 7906 and v 16A Electrical coupler v 16A Straight coupler, can be used for power feed v 16A X coupler can be used for power feed v 16A Flexible coupler. Black Black 89

94 TRACK LIGHTING IP20 LUXOR is a professional projector made from die-cast and extruded aluminium with ventilated rear cover. Fully adjustable, the Luxor can be 3-circuit track mounted or surface mounted. Integral electronic control gear for metal halide lamps with ventilated rear cover and twist off front cap allows for easy relamping. The Luxor features a recessed lamp position for low glare effect. REFLECTOR ANGLES AVAILABLE 24º 45º 360 Black MA MA 240v 35W CDM-T G12 240v 70W CDM-T G12 Spotlight with three circuit track adaptor and integral electronic control gear. Supplied with 45º reflector as standard. Spotlight with three circuit track adaptor and integral electronic control gear. Supplied with 45º reflector as standard. 220 ADD SUFFIX SM FOR SURFACE MOUNT. ADD SUFFIX SM FOR SURFACE MOUNT IP20 TELUX Manufactured from die-cast aluminium alloy and extruded ed aluminium gearbox with ventilation. Features include: Built-in electronic control gear Pure aluminium reflectors with choice of beam angles Available for surface mount or three circuit track mount applicationsplications Fully adjustable and 355 rotation v 20W CDM-TC G8.5 Track mounted with 45 reflector Add suffix SM for surface mount Black v 35W CDM-TC G v 70W CDM-TC G8.5 Track mounted with 45 reflector Add suffix SM for surface mount. Track mounted with 45 reflector Add suffix SM for surface mount

95 TRACK LIGHTING IP20 IP20 ACCENT is manufactured from die-cast aluminium alloy and aluminium gearbox which is oriented in a horizontal position for rapid ventilation. Features include: Built-in electronic control gear Pure aluminium reflectors Available for three circuit track or surface mount Fully adjustable and 355 rotation CITY spotlight features modern styling and a retractable lamp support ring. Manufactured from pressure die-cast aluminium. The City features a lamp support ring on an adjustable arm Black Black v 20W CDM-TC G v 75W PAR30 Track mounted with 45 reflector v 35W CDM-TC G8.5 Track mounted with 45 reflector v 70W CDM-TC G8.5 Track mounted with 45 reflector v 120W PAR38 Spotlight with three circuit track adaptor. COLOUR AND FINISH OPTIONS THIS MODEL CAN TAKE LED LAMP OPTION. 91

96 TRACK LIGHTING VOLTIX is a fully adjustable spot light manufactured from die-cast aluminium. Supplied with built in electronic control gear housed in a ventilated gear box, the Voltix is constructed of extruded aluminium. The pure aluminium reflector can be coupled with a variety of lamps. Add suffix SM for surface mounted. IP43 IP43 IP Black 360 Black 360 Black 45 60º v 20W CDM-TC G v 26W PLT-E G24q v 20W CDM-R111 Gx v 35W CDM-TC G v 32W PLT-E G24q v 70W CDM-TC G8.5 Complete with integral electronic control gear and 3 circuit track adaptor v 35W CDM-R111 Gx v 42W PLT-E G24q-4 240v 70W CDM-R111 Gx8.5 Complete with integral electronic control gear and 3 circuit track adaptor Complete with integral electronic control gear and 3 circuit track adaptor 92

97 ROCKPORT - CHATSWOOD NSW 93

98 NAVY MUSEUM - NSW AUSTRALIA

99 EXTERIOR LIGHTING

100 EXTERIOR LIGHTING IP65 ZENTA EURO is a range of exterior spotlight featuring square modern design lines and flush fitting glass lenses. Manufactured using machined aluminium alloy with a bright anodised finish for durability. The Zenta features a lamp retaining clip, silicone sealed glass and retained ring seal allow for easy lamp replacement. Available in two options; 12v remote transformer or with integrated 240v encapsulated transformer. Machined aluminium alloy construction Tempered glass cover Temperature resistant silicone seals. Twisted off front for easy lamp replacement BRIGHT ANODISED FINISH AND FLUSH GLASS Anodised BRIGHT ANODISED FINISH AND FLUSH GLASS 90 Anodised BRIGHT ANODISED FINISH AND FLUSH GLASS Anodised BT EURO 12v 20W to 50W Wall mounted downlight with integral magnetic transformer. Dimmable BT EURO 12v 20W to 50W Tilt adjustable spotlight with integral magnetic transformer. Dimmable BT EURO 12v 2 x 20W Wall mounted up/downlight with integral magnetic transformer. Dimmable EURO 12v 20W to 50W Wall mounted downlight requiring remote transformer EURO 12v 20W to 50W Tilt adjustable spotlight requiring remote transformer. Anodised EURO 12v 2 x 20W Wall mounted up/downlight requiring remote transformer EURO 12v 20W to 50W Tilt adjustable spotlight with ground spike. 90 Anodised 96

101 EXTERIOR LIGHTING IP65 UDON is a wall mounted combination up-downlighter. Rated IP65 for exterior use. Constructed in die-cast aluminium alloy with polyester powdercoat paint protection. The Udon features frosted tempered glass with silicone seals and stainless steel fasteners. FUTON is an internal or external up/down light with frosted tempered glass diffuser. ZENTA internal or external wall light with up/down light distribution is manufactured from die-cast aluminium. The base and front square tube can swivel at 90 to one another. IP65 IP65 IP v 2x20W to 50W Wall mounted fixture requiring remote transformer v - 12v 2x20W Wall mounted fixture with integral 60VA dimmable electronic transformer Black v 25W to 75W G9 240v - 12v 2x20W Suitable for economical dimming. Black Wall mounted fixture with integral 60VA electronic dimmable transformer v 2x50W GU10 Wall mounted fixture with up/down distribution. Can also be used with7w-11w ES fluoro lamps V 100W Rx7s V 13W PLC Wall mounted for up lighting V 100W Rx7s V 13W PLC Wall mounted for up/down lighting. IP54 ZELDA compact wall fixture can be used for direct and indirect illumination effects. A wide distribution is achieved using a clear tempered glass cover. Housing and back plate is formed in pressure die-cast aluminium with polyester powdercoat paint finish. Silicone seals provide IP54 weather protection. Black 97

102 EXTERIOR LIGHTING IP55 TEMPO ONE is a wall mounted downlight engineered in steel and die-cast aluminium with a durable powdercoat paint finish and a tempered glass cover, stainless steel screws and silicone gaskets. The Tempo One can be inverted and used for indirect illumination. Reflectors in 99.9% pure aluminum v 1x32W PLT-E G24q v 1x42W PLT-E G24q-4 With integral electronic control gear V 35W G12 MH V 70W G12 MH V 150W G12 MH v 70W HPS-E E27 Wall mounted downlight with integral electronic control gear. Black IP55 TEMPO TWO is a wall mounted fixture with bi-directional distribution using energy saving high output lamps. Reflectors at high purity anodised aluminium sealed behind a tempered glass lense that is IP55 rated. Tempo Two is constructed in pressure die-cast aluminium and steel with a durable powdercoat paint finish, with stainless steel fasteners v 2x26W G24q-3 electronic PLT v 2x32W G24q-3 electronic PLT v 2x42W G24q-4 electronic PLT With integral electronic control gear V 2x35W G12 MH V 2x70W G12 MH Wall mounted up-downlight with wide beam distribution and integral electronic control gear. Black 98

103 EXTERIOR LIGHTING IP55 SYNCRO is a wall mounted fixture with upward and downward illumination. Constructed in pressure die-cast aluminium with extruded aluminium body and durable powdercoat paint finish. The Syncro features removable end caps with clear tempered glass lenses that allow for easy lamp replacement, silicone seals for durability and exposed stainless steel fasteners and IP55 protection. Integral aluminium reflectors can be used with standard incandescent halogen lamps for wide distribution or sealed reflector lamp combination for narrow beam distribution V 2x75W E V 2x75W PAR30 E V 2x18W PLC-E G24q V 2x20W CDM-TC G8.5 METAL HALIDE Wall mount up and downlighter with diffused reflectors and electronic gear. 130 Black IP55 SYNCRO-D wall mount fixture with optional downward illumination or up and down throw. The Syncro-D is constructed in pressure die-cast aluminium and extruded aluminium body with clear tempered glass covers and silicone seals v 1x20W CDM-TC G8.5 METAL HALIDE v 1x18W PLC-E G24q v 1x26W PLC-E G24q-3 Wall mount down light with integral electronic control gear v 75W E27 ALSO AVAILABLE AS A CEILING MOUNT VERSION AND IN 20W LED Black 99

104 EXTERIOR LIGHTING IP54 IP55 COLUMBINE is a surface mounted downlight with an IP55 rating. Engineered from steel and pressure die-cast aluminium then finished in durable powdercoat paint finish. The Columbine features a sealed tempered glass lens, exposed stainless steel fasteners and 99.9% pure aluminium reflectors. The Columbine also features a modular control gear and lampholder assembly for easy installation. TOMMASO wall mounted fixture available with optional one way or two way distribution in combination with various compact lamp types. Constructed from pressure die-cast aluminium with pretreatment and durable polyester powdercoat paint finish. The Tommaso features a tempered glass diffuser with silicone seals to provide IP54 weather protection Black Black v 35W G v 70W G v 2x26W G24d-3 With integral magnetic control gear v 150W G12 With integral electronic control gear v 1x32W PLT-E G24q-3 electronic v 1x42W PLT-E G24q-4 electronic With integral electronic control gear v 2x26W R7s G24d-3 With integral magnetic control gear. 100

105 EXTERIOR LIGHTING IP65 MOLO surface mount wall light with integral control gear for either direct or indirect illumination of building facades and architectural features is constructed using pressure die-cast aluminium with a durable powdercoat paint finish and a tempered glass lens with silicone seal, providing IP65 protection. Unique mounting bracket ensures the fitting remains flush to the wall with surface and cable entry glands facilitating ease of installation. IP NOTE: ALL VARIATIONS ARE COMPLETE WITH INTEGRAL ELECTRONIC CONTROL GEAR, UNLESS SPECIFIED. Black v 35W CDM-T G v 70W HQI-E E v 32W PLT G24q-4 electronic v 70W CDM-T G12 Wall light with medium beam distribution v 100W HQI-E E27 240v 42W PLT G24q-4 electronic v 26W PLC G24d-3 IP65 DOCK BOX wall mounted fixture providing illumination for large areas such as industrial premises and loading docks. Pressure die-cast aluminium housing with prismatic tempered glass lens, silicone housing seals with 4 cable and conduit entry points, finished with a durable powdercoat and stainless steel fasteners v 2x42W PLT-E G24q-4 Wall mount fixture with integral electronic control gear v 70W HQI-E E v 70W HPS-E E27 Wall mount fixture with integral magnetic control gear. ADD SUFFIX: HF for electronic gear IP65 ALSO AVAILABLE IN 30W LED 3000K & 4000K 40W LED 3000K & 4000K Black 101

106 EXTERIOR LIGHTING IP65 PAT are a series of surface mounted exterior fittings suitable for use on walls or ceilings. Constructed in pressure die-cast aluminium alloy providing definition to the luminaires shape and form. The multistage finishing process includes a phosphocromation pre treatment to the raw castings and ends with a polyester powdercoat paint finish for superior corrosion resistance. Diffusers are moulded in impact resistant opal polycarbonate; an expanded silicone rubber seal between the diffuser and body provides weather protection to IP65, while all exposed fasteners are in marine grade stainless steel PROTECTION AGAINST IMPACT IK 09-10,00 JOULE EN COMPACT FLUORESCENT VERSIONS ARE SUPPLIED WITH INTEGRAL MAGNETIC CONTROL GEAR. Black V 70W E27 240V 70W E27 240V 70W E V 2x9W G23 240V 2x9W G23 240V 2x9W G V 2x13W G24d V 2x18W G24d-3 240V 2x13W G24d V 2x18W G24d-2 240V 2x13W G24d V 2x18W G24d ADD SUFFIX: HF for electronic ballast. ALSO AVAILABLE IN AS 20W LED 3000K & 4000K

107 EXTERIOR LIGHTING IP54 SAM are a series of surface mount exterior wall fittings or ceilings, featuring lamp visors to provide directional lighting and reduced glare. Each design offers a moulded polycarbonate diffuser with opal finish in conjunction with an expanded silicone seal to provide IP54 weather protection. Housings and trims are formed using pressure die-cast aluminium which is pretreated with phosphocromation prior to applying a polyester powdercoat paint finish which is available in three colour options. Exposed fasteners are in stainless steel and flourescent versions have a specular aluminium gear tray module for easy installation PROTECTION AGAINST IMPACT COMPACT FLUORESCENT VERSIONS ARE SUPPLIED WITH INTEGRAL MAGNETIC CONTROL GEAR. Black V 42W E27 240V 42W E27 240V 42W E27 240V 42W E V 2x9W V 2x9W V 2x9W V 2x9W 103

108 EXTERIOR LIGHTING IP65 CANTO is an exterior wall or ceiling mounted fitting. Constructed in pressure die-cast aluminium alloy. The Canto features a polyester powdercoat paint finished for excellent corrosion resistance and an opalised diffuser in polycarbonate with silicone rubber seals, exposed fasteners in stainless steel, with integral standard ballast and switch start control gear. Add suffix HF to order code for electronic ballast. LUNAR utility light with reinforced nylon body and opal polycarbonate diffuser. Features: Anti corrosion housing Aluminium internal reflector Silicone seal for diffuser Optional lamp types Wall or ceiling mount Stainless steel screws PROTECTION AGAINST IMPACT Black PROTECTION AGAINST IMPACT RUST Black V 2x11W PL G V 42W E V 42W E V 2x18W G24d V 2x9W PL G V 2x9W PL G V 2x26 G24d-3 Utility light with integral magnetic control gear. Utility light with integral magnetic control gear. ALSO AVAILABLE AS E27 WITH AN INTERNAL MOTION SENSOR IP65 PROTECTION AGAINST IMPACT Black MAXI PAT exterior fixture features a pressure die-cast aluminium housing and trim supporting the opal polycarbonate diffuser and integral silicone seal providing an IP65 protection rating. Can be ceiling or wall mounted V 70W E V 2x18W G24d-3 With integral magnetic control gear V 2x26W G24d With integral magnetic control gear. 104 ADD SUFFIX:- HF Electronic Ballast.

109 EXTERIOR LIGHTING IP65 MAXIMUS wall mounted fixtures feature heavy duty housings formed in pressure die-cast aluminium with durable powdercoat paint finish. Maximus is available in three styles each with opalised polycarbonate diffusers and integral control gear for energy saving lamps PROTECTION AGAINST IMPACT Black V 2x42W E V 2x42W E V 2x42W E V 2x26W G24q V 2x26W G24q V 2x26W V 70W HQI-E Fixture with open face and integral electronic gear V 70W HQI-E Fixture with cross guard and integral electronic gear V 70W HQI-E Fixture with eyelid cover and integral electronic gear. 105

110 EXTERIOR LIGHTING IP65 TOP is a surface mounted luminaire that features a translucent base that creates a halo of light on the ceiling or wall. A prismatic opal glass lens provides soft illumination and is held in a moulded polycarbonate trim with twist action for easy relamping. The mounted base provides an expanded silicone seal giving IP65 weather protection along with a cable entry gland. Fluorescent version utilises electronic circuitry for optimum performance RUST Black V 70W E27 240V 70W E27 240V 70W E V 70W E V 2x26W electronic G24q-3 Fitting with clear base and electronic ballast Fitting with red translucent base and electronic ballast Fitting with blue translucent base and electronic ballast V 2x26W electronic G24q-3 240V 2x26W electronic G24q-3 240V 2x26W electronic G24q-3 Fitting with amber translucent base and electronic ballast IP65 FORTE recessed wall light with downward distribution to illuminate floors and pathways with no glare. Manufactured from aluminium die-cast alloy Tempered glass in prismatic diffuse Powdercoated finish in acid clean and polyester paint baked at 180 C Silicone seal with stainless steel fasteners Integral control gear. Moulded installation well supplied with each fitting LED version for no maintenance, energy saving and up to 50,000 hours lifespan MOULDED INSTALLATION WELL SUPPLIED WITH EACH FITTING. 135x x V 18W G24d V 26W G24d-3 Recessed wall light with integral magnetic ballast circuit. Black W Hi-Power LED 350mA Recessed wall light with frost glass and integral 240v input 350mA driver. LED available in: 3000K with total 680 lumens output 4000K with total 730 lumens output 106

111 EXTERIOR LIGHTING IP65 APPLIQUE SERIES of surface mount fittings in a range of lamp options. Die-cast aluminium housings Durable powdercoat paint finish Tempered frost glass covers Silicone rubber gaskets Stainless steel fastener details Internal aluminium reflector Integral magnetic control gear where required IP Black V 26W PL-C G24d V 26W PL-C G24d V 26W PL-C G24d V 18W PL-L 2G V 18W PL-L 2G V 18W PL-L 2G V 42W E V 42W E V 42W E27 RUST Polycarbonate body MOULDED INSTALLATION WELL SUPPLIED WITH EACH FITTING. Black 240V 18W PL-L 2G11 Recessed wall light with open glass diffuser Polycarbonate body V 18W PL-L 2G11 Recessed wall light with louvred facia. IP65 EUROPA recessed wall lights feature a moulded corrosion resistant polycarbonate housings. Utilising low energy compact flourescent lamps with integral magnetic control gear and aluminium reflectors. The Europa features an optional open or louvred tempered glass lens with diffuse finish and expanded neoprene rubber gasket with stainless steel fasteners. IP65 107

112 EXTERIOR LIGHTING IP65 VOLCANO is a series of recessed downlights for medium wattage energy saving lamps. Featuring a fully enclosed housing made from die-cast aluminium with silicone seals and cable gland to provide IP65 protection and clear tempered glass cover. Finished in black powdercoat paint; the main body has raised fins to facilitate heat dissipation and three adjustable ceiling clamps for positive retention. Supplied with 1.5m of silicone cable for connection to the power supply or remote control gear. IP65 VOLCANO MINI is fully enclosed downlight with IP65 rating from all directions for use in exposed areas and to eliminate the ingress of insects and moisture. Constructed in die-cast aluminium with black powdercoat paint finish and cable entry gland. Supplied with 1.5m silicone flex for connection to power supply or remote control gear. Front trim holds tempered glass cover with durable silicone seals and is easily removed for installation and relamping. Unique adjustable clamps provide positive ceiling retention, for ceilings up to 35mm thick. Available in a series of lamp options ranging from halogen reflector lamps through energy saving flourescent and compact metal halide with ceramic technology ONE PIECE HOUSING IN PRESSURE DIE-CAST ALUMINIUM ALLOY. ADJUSTABLE CEILING CLAMPS FOR CEILINGS UP TO 35MM THICK ONE PIECE HOUSING IN PRESSURE DIE-CAST ALUMINIUM ALLOY WITH RAISED FINS AS HEAT SINK. ADJUSTABLE CEILING CLAMPS FOR CEILINGS UP TO 35MM THICK. ALSO AVAILABLE AS A 13W 180 AND 18W LED DOWNLIGHT V 26W G24q-3 PLT-E V 35W CDM-T G12 240V 20W CDM-TC G V 42W G24q-4 PLT-E 240V 70W CDM-T G12 Downlight with remote electronic ballast box V 100W PAR38 E27 Downlight for 240v direct connection. Downlight supplied with remote electronic control gear V 35W CDM-TC G V 13W G24q-1 PLT-E Downlight supplied with remote electronic ballast box. IP FUZE TWO medium size general floodlight with wide beam distribution from a specular reflector with stippled pattern. Features: High purity aluminium reflector Integral control gear for both metal halide and high pressure sodium lamps. Housing in pressure die-cast aluminium Durable polyester powdercoat paint finish Stainless steel fasteners Silicone rubber seals V 70W Rx7s V 150W Rx7s 210 Black HPS-TS HQI-TS HPS-TS HQI-TS Surface mount tilt adjustable floodlight with integral magnetic control gear.

113 EXTERIOR LIGHTING IP55 IP55 MEKO is post light with louvered optics to minimise visual glare and provide sideways light distribution. Features: Main shaft manufactured from extruded heavy duty aluminium Die-cast base and top from aluminium alloy Durable polyester powdercoat finish Polycaronate diffuser 99.8% pure aluminium louvre optics BOLO is a post light bollard with louvered optics to eliminate visual glare and provide sideways light distribution. Features: Manufactured from extruded and die-cast aluminium alloy Durable polyester powdercoat finish Silicone seals Stainless steel fasteners Variety of energy saving lamp options Stainless steel fasteners Black Black V E27 42W Bollard without control gear can be used with a variety of energy saving lamps V 26W PLC G24d-3 Fluoro Bollard with integral magnetic control gear V 42W PLT-E G24q-4 Fluoro Bollard with integral electronic control gear V 70W HQI-E E27 Bollard with integral magnetic control gear V E27 42W Bollard without control gear can be used with a variety of energy saving lamps V 26W PLC G24d-3 Bollard with integral magnetic control gear V 42W PLT-E G24q-4 Bollard with integral electronic control gear V 70W HQI-E E27 Fluoro Fluoro Bollard with integral magnetic control gear. 109

114 EXTERIOR LIGHTING IP65 ELAN & MAXI ELAN are asymmetrical distribution floodlights with specular patterned aluminium reflectors ideal for illuminating vertical facades and signage. Their compact slim design houses integral control gear with a hinged cover for easy lamp access and maintenance. Supplied with a clear tempered glass lens or optional colour filters for the Elan for added effects. Constructed in pressure die-cast aluminium with durable powdercoat paint finish and PG9 cable gland. The Elan is IP65 rated and features exposed stainless steel fasteners. ELAN MAXI ELAN SAIL AREA FOR WINDAGE 0.08M 2. MAX WEIGHT 7KG 270 Black SAIL AREA FOR WINDAGE 0.25M 2. MAX WEIGHT: KG KG 270 Black v 70W Rx7s HPS-TS HQI-TS v 250W HQI-T E v 150W Rx7s HPS-TS HQI-TS v 400W HQI-T E40 ELAN surface mount floodlight with asymmetrical distribution and integral magnetic control gear. MAXI-ELAN surface mount floodlight with asymmetrical distribution and integral magnetic control gear. Options Accessories OPTIONAL UPLIGHT MOUNTING BRACKET 7555 UB 7554 UB Black Suits or only. Suits or only UB UB RANGE OF OPTIONAL DICHROIC COLOUR FILTER GLASSES FOR & ONLY Frost 7557 Red 7558 Blue 7559 Green 7560 Yellow LOUVRE ACCESSORY Black 110

115 EXTERIOR LIGHTING IP65 FYZZ is a series of spot and floodlights for illuminating architectural features, facades and signage. Fyzz s dual stage housing thermally isolates the lamp head from the control gear for optimum performance. High purity anodised aluminium reflectors provide three distribution options, when using energy saving metal halide lamps for superior colour rendering and efficacy. The face is frame with a tempered glass lens while a silicone seal can accomodate dichroic filter accessories for extra colour effects. PG9 cable entry gland provides IP65 weather protection, whilst its body constructed in pressure diecast aluminium and durable powdercoat paint finish with exposed stainless steel fasteners, facilitates this protection. IP65 ALSO AVAILABLE AS 30W LED WITH 2470 LUMENS RANGE OF OPTIONAL DICHROIC COLOUR FILTER GLASSES Frost 7377 Red 7378 Blue 7379 Green 7380 Yellow SAIL AREA FOR WINDAGE 0.08M 2 MAX WEIGHT 7KG 270 Black v 35W G v 35W G v 35W G v 70W G v 70W G v 70W G v 150W G12 Spotlight with 8 narrow beam and integral magnetic control gear v 20W CDM-TC G v 35W CDM-TC G v 70W CDM-TC G8.5 Spotlight with integral electronic gear. Supplied as standard with reflector of 54 flood beam angle v 150W G12 Spotlight with 32 medium beam and integral magnetic control gear. OTHER REFLECTORS AVAILABLE WITH: 18 NARROW BEAM MEDIUM BEAM Black v 150W G12 Spotlight with 60 wide beam and integral magnetic control gear. IP65 VINTA external floodlight for accent or signage lighting. Features: Manufactured from die-cast aluminium alloy Corrosion resistant powdercoat finish with pre-treated polyester powder Tempered clear glass Stainless steel fasteners Silicone seals 99.8% pure aluminium reflector with low glare and 85% reflection rate Integral control gear IP65 IES FILES AVAILABLE ON REQUEST. 111

116 INDEX LED RANGE METAL HALIDE PENDANTS 12V DOWNLIGHTS/SPOT ,39, , OC32-F42-WII 65 OC32-C70-WII 65 OC32-C15-WII ME EB FM ET ME EB FM ET ME EB FM ET ME EB FM ET

117 INDEX FLUORESCENT TRACK LIGHTS EXTERIOR A B A B A B A B AS AS AS ASM ASM ASM ASM ASM , , , , , , , , , , , , , , , , , , , , , MA MA EURO EURO BTEURO EURO BTEURO EURO BTEURO UB UB