( NOTICE
|
|
|
- Damian Cole
- 5 years ago
- Views:
Transcription
1 GOVERNMENT OF JAMMU AND KASHMIR, SERVICES SELECTION BOARD, Zum Zum Hotel, Rambagh, Srinagar ***** ( NOTICE It is notified for the information of the candidates, who have applied for below mentioned posts notified from time to time, that the Board is going to conduct the Objective Type Written Test during the Month of September 2015 for which the syllabus is appended to this notice at Annexure A. Item No. Adv.N.No. Name of the Department Name of the post Cadre of 2013 Tourism and Culture Electrician State of 2013 Animal/Sheep Husbandry Electrician Div. Kmr of 2014 Estates Department Pump Operator Div. Jammu of 2014 Estates Department Pump Operator Div. Kashmir of 2011 Higher Education Electrician II Div Kashmir of 2012 Ind. & Com(I&C) Electrician Jammu of 2014 Estates Department Electrician Div. Jammu of 2013 Health and Medical Education Electrician Div Jmu of 2014 Estates Department Electrician Div. Kashmir of 2014 Animal/Sheep Husbandry Department Electrician Div. Jammu of 2011 Hr. Education Electrician Div. Kmr of 2012 Tourism Electrician State of 2011 Hr. Education Electrician Div. Jmu of 2013 Technical Education/YSS Department Vocational instructor (Electrician trade) Div Jmu of 2011 Technical Education Vocational Instructor Electrician Div Jammu of 2014 Science and Technology Department Technician-II State of 2011 Power Development Department Technician-III Div. Kmr
2 (S.A Raina), KAS, Secretary, J&K Services Selection Board, Srinagar. No. SSB/ /Sel/Secy/2015/ Dated: Copy to the:- 1. Principal Secretary to Hon ble Chief Minister J&K. 2. Principal Secretary to the Hon ble Governor, J & K State. 3. Director Information, J&K Government Srinagar with the request to publish the above notification in at least three leading local newspaper of Jammu/Srinagar on three consecutive dates 4. Director, Radio Kashmir, Kashmir. He is requested to kindly broadcast the above said notification appropriately. 5. Director, Doordarshan Kashmir. He is requested to kindly telecast the above said notification appropriately. 6. Deputy, Secretary, JKSSB, Jammu. 7. Sr. Law Officer, J&K S.S.B., Srinagar/ Jammu 8. Administrative Officer, Service Selection Board, Jammu/Srinagar. 9. Private Secretary to Chairperson. 10. Incharge Website, SSB. He shall upload the notice on the official website of the Board. 11. Record File.
3 Lead Acid cell, general defects & remedies. Nickel Alkali Cell-description charging. Power & capacity of cells. Efficiency of cells GOVERNMENT OF JAMMU AND KASHMIR, SERVICES SELECTION BOARD, Zam Zam, Building, Rambagh, Srinagar. ( ***** Annexure A Syllabus for written test (Objective Type) for the above said posts Time= 2.30 Hours. Total Marks=150 Topics Various safety measures involved in the Industry. Elementary first Aid. Concept of Standard Identification of Trade-Hand tools-specifications Fundamental of electricity. Electron theory- free electron. Fundamental terms, definitions, units & effects of electric current Solders, flux and soldering technique. Resistors types of resistors & properties of resistors. Explanation, Definition and properties of conductors, insulators and semiconductors. Voltage grading of different types of Insulators, Temp. Rise permissible Types of wires & cables standard wire gauge Specification of wires & Cables-insulation & voltage grades -Low, medium & high voltage Precautions in using various types of cables Ohm s Law - Simple electrical circuits and problems. Resistors -Law of Resistance. Series and parallel circuits. Kirchoff s Laws and applications. Wheatstone bridge principle and its applications. Common Electrical Accessories, their specifications-explanation of switches lamp holders, plugs and sockets.developments of domestic ckts, Alarm & switches, lamp, fan with individual switches, Two way switch. Chemical effect of electric current-principle of electrolysis. Faraday s Law of electrolysis. Basic principles of Electro-plating and Electro chemical equivalents. Explanation of Anodes and cathodes. Lead acid cell-description, methods of charging-precautions to be taken & testing equipment, Ni-cadmium & Lithium cell, Cathodic protection. Electroplating, Anodising Rechargeable dry cell, description advantages and disadvantages. Care and maintenance of cells Grouping of cells of specified voltage & current, Sealed Maintenance free Batteries, Solar cell. Marks 15 Marks
4 ALLIED TRADES: Marking use of chisels and hacksaw on flats, sheet metal filing practice, filing true to line. Sawing and planning practice. Practice in using firmer chisel and preparing simple half lap joint. Drilling practice in hand drilling & power drilling machines. Grinding of drill bits. Practice in using taps & dies, threading hexagonal & square nuts etc. cutting external threads on stud and on pipes, riveting practice. Practice in using snips, marking & cutting of straight & curved pieces in sheet metals. Bending the edges of sheets metals. Riveting practice in sheet metal. Practice in making different joints in sheet metal in soldering the joints. Magnetism - classification of magnets, methods of magnetising, magnetic materials. Properties, care & maintenance, methods of magnetising magnetic materials. Para & Diamagnetism and Ferro magnetic materials. Principle of electro-magnetism, Maxwell s corkscrew rule, Fleming s left & right hand rules, Magnetic field of current carrying conductors, loop & solenoid. MMF, Flux density, reluctance. B.H. curve, Hysteresis, Eddy current. Principle of electro-magnetic Induction, Faraday s Law, Lenz s Law. Electrostatics - Capacitor- Different types, functions & uses Resistance- Different Types of resistors used in electrical ckts. Specification of resistance and tolerance. Effect of variation of temperature on resistance. Different methods of measuring the values of resistance Working principles and circuits of common domestic equipments & appliances D.C. Machines - General concept of Electrical Machines. Principle of D.C. generator. Use of Armature, Field Coil, Yoke, and Commutator, slip ring Brushes, Laminated core. Explanation of D.C. Generators-types parts. E.M.F. equation-self excitation and separately excited Generators-Practical uses. Brief description of series, shunt and compound generators. Expl. Of Armature reaction, interpoles and their uses, connection of interpoles, commutation. DC Motors - Terms used in D.C. motor-torque, speed, Back-e.m.f. etc. their relations practical application. Related problems Types, characteristics and practical application of D.C. motors. Special precaution to be taken in DC Series motors. Starters used in D.C. motors Types of speed control of DC motors in industry Word-Leonard control, Thyristor/electronic controls. Insulting materials properties common insulting materials, classifications Electric wirings, importance, I.E.E. rules. Types of wirings both domestic & industrial - Specifications for wiring Grading of cables and current ratings. Principle of laying out in domestic wiring-testing by meggar Wiring system - Using casing capping, P.V.C., concealed system. -Maintenance & Repairing data sheet preparation.. Specifications, standards for conduits & accessories Earthing - Principle of different methods of earthing. Importance of Earthing. -Earth Leakage Relay. Alternating Current -Comparison D.C& A.C., Advantages of A.C. Alternating current & related terms frequency Instantaneous value, R.M.S. value Average value, Peak factor, form factor. Generation of sine wave, phase and phase difference. Inductive & Capacitative reactance XL & Xc, Impedance (Z), power factor,(p.f) ; Vector diagram. Active and Reactive power, Simple problems on A.C. circuits, single phase & three-phase system etc. Problems on A.C. ckts. Both series & parallel power consumption P.F. etc. Concept three-phase Star & Delta connection Line voltage & phase voltage, current & power in a 3 ph ckt, with balanced and unbalanced load. 12 Marks
5 TRANSFORMERS Working principle of Transformer, classification C.T., P.T. Instrument and Auto Transformer/Variac Construction, Single phase and Poly phase. E.M.F. equation, parallel operation of transformer, their connections. Regulation and efficiency, Cooling of transformer, protective devices. Specifications, simple problems on e.m.f. Equation, turn ratio, regulations and efficiency. Special transformers. Transformer - construction cores winding shielding, auxiliary parts breather, conservator buckholtz relay, other protective devices cooling of transformer Transformer oil testing and Tap changing off load and on load. Transformer bushings and termination. ALTERNATOR Explanation of alternator, prime mover, types, regulations, phase sequence, specification of alternators and brushless alternator. Automatic Voltage Regulator. Electrical measuring Instruments - -types Deflecting torque, Controlling torque & Damping torque, -Moving coil permanent magnet -Moving iron -Range extension -Multimeter -Wattmeter - P.F. meter -Intergrading type, Digital Energy meter megger. -Energy meter -Frequency meter - Tri vector meter -Max Demand meter -Phase Sequence indicator -Multimeter Analog and Digital - C.R.O, Explanation of light White light-illumination factors, intensity of light importance of light, human eye factor units. Types illumination & lamps -Neon sign Halogen, Mercury vapour, sodium vapour, Fluorescent tube CFL, Solar lamp applications, Concept of Energy -Characters watt ages, fixing places. Types of lighting. Decoration lighting Drum Switches, Direct & indirect lighting-efficiency in lumens per watt, colour available. Thumb rule calculations of lumens. Estimating placement of lights and fans and ratings. TRANSFORMER winding, Principle of different winding techniques D.C. m/c Winding-- pole pitch, coil pitch, back pitch, front pitch, Lap & Wave winding, Progressive and retrogressive winding. SYNCHRONOUS MOTOR - Working principle, effect of change of excitation and load. Application in industry in power factor improvement. Induction motor Working principle, Squirrel Cage Induction motor, Slip-ring induction motor- Construction and characteristics, starting and speed control. D.O.L Starter, Star /Delta starter, Autotransformer starter. Single phase induction motor- Working principle, different method of starting and running (capacitor start/capacitor run, shaded pole technique). FHP motors. A.C. m/c Winding-- Armature winding terms, coil side, end coil and grouping of coils. Connection to adjacent poles, connected armature winding, alternate pole connection, armature winding. Universal motor-advantages Principle, characteristics, applications in domestic 08 Marks 07 Marks
6 appliances and industry, Fault Location and Rectification. Converter-inverter, M.G.Set-description-Characteristics, specifications-running and maintenance. Techniques, procedures of Layout of conduit wiring as per I.S Use of flame proof and explosion proof, Installation of P.V.C. conduct switches. Fuse / cut out / kit Kat function, characteristics, and materials. H.R.C Fuses application. Contactors Miniature circuit breakers. Relays Thermal, Electromagnetic, solid state relays, Control Relays and Protective Relays. Industrial wiring. Code of practice & relevant span. Wiring of electric motors, control panel, etc. Types, specifications, advantages of different types of circuit brackets construction and maintenance. I.E.E. rules for overhead service lines, study of U.G.Cables and laying techniques. Working principle and construction of domestic and agricultural appliances-their maintenance Corona, Lightning arrestor/lighting conductor, Horn gap. Introduction to Basic electronics- Semiconductor energy level atomic structure. P & N type of materials P-N-junction. Diode-classification of Diodes Revered Bias and Forward Bias, Heat sink. Specification of Diode PIV rating. Explanation and importance of D.C. Rectifier ckt. Half wave, Full wave and Bridge ckt. L.E.D. and Solar cells. Filter ckts-passive filter. Working principle and uses of an oscilloscope Explanation of principle of working of a transistor- Types of transistors Characters of a transistors Biasing of transistors. Mode of use of transistor. Specification and rating of transistors Explanation of transistor Amplifiers, Amplifiers. class A,B & C Power amplifier Explanation of oscillator-working principle Explanation of stages and types. Multivibrator applications. OP-AMP Working principles and applications. Timer I.C.555 Explanation. and working principle and practical applications of U.J.T., F.E.T., S.C.R. Diac, Triac, power MOSFET, G.T.O & I.G.B.T. D.C/A.C Power control using power transistor, thyristor. Voltage stabilizer, U.P.S. DC/AC motor drives using transistor/thyristor. Power Supply Stabilizer, Ferro resistant circuit. DC/AC motor drives using Thyristor/Transistor control Digital Electronics -Binary numbers, logic gates and combinational ckts, Flip Flops, Counter, Register & Timer. Complete House-wiring layout. Circuit splitting load wire. I.E.E. Rules. Multistoried system. Fault finding and trouble shooting of domestic electrical appliances. Decorative lighting - Fault finding techniques in Decoration lighting. 08 Marks (S.A Raina), KAS, Secretary, J&K Services Selection Board, Srinagar.
INDICATIVE SYLLABUS FOR THE TRADE- ITI- ELECTRICIAN Trade Theory
Sl.No 1 INDICATIVE SYLLABUS FOR THE TRADE- ITI- ELECTRICIAN Trade Theory Occupational Safety and Health Basic safety introduction, Personal protection. Basic injury prevention, Basic first aid, Hazard
Syllabus for the Trade of Electrician Duration : Six Month Second Semester Semester Code: ELE: SEM II
Syllabus for the Trade of Electrician Duration : Six Month Second Semester Semester Code: ELE: SEM II Week Trade practical No. 1-2 Different wave shapes of rectifiers and their values using C.R.O. Identification
Syllabus for the Trade of Electricial Power sector (TRADE: ELECTRICIAN) Duration : Six Month First Semester Semester Code: EL: SEM I
Syllabus for the Trade of Electricial Power sector (TRADE: ELECTRICIAN) Duration : Six Month First Semester Semester Code: EL: SEM I Week Trade Practical No. 1 Implementation in the shop floor of the various
Contents. Review of Electric Circuitd. Preface ;
Preface ; Chapter 1 Review of Electric Circuitd 1.1 Introduction, 1 1.2 Direct Circuit Current, 1 1.2.1 Voltage, 3 1.2.2 Power, 3 1.2.3 Ohm's Law, 5 1.2.4 KirchhofTs Laws, 5 1.2.4.1 Kirchhoff s Current
SYLLABUS FOR ELECTRICAL SUPERVISOR CERTIFICATE OF COMPETENCY (SCC MV) Electrical Engineering Paper (Written Test)
ANNEXURE I SYLLABUS FOR ELECTRICAL SUPERVISOR CERTIFICATE OF COMPETENCY (SCC MV) Electrical Engineering Paper (Written Test) Paper I & Paper II for General Category of S.C.C. Examination Paper I & Paper
Syllabus for the Trade of Wireman Duration : Six Months
First Semester Semester Code: WM: SEM I Syllabus for the Trade of Wireman Duration : Six Months Week No. Trade Practical Trade Theory 1 Implementation in the shop Occupational Safety and Health floor of
INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad
INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad - 500 043 MECHANICAL ENGINEERING ASSIGNMENT Name : Electrical and Electronics Engineering Code : A40203 Class : II B. Tech I Semester Branch :
DEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1
It is the mark of an educated mind to be able to entertain a thought without accepting it. DEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1 1. Explain the Basic concepts of rotating machine. 2. With help
DC CIRCUITS ELECTROMAGNETISM
DC CIRCUITS 1. State and Explain Ohm s Law. Write in brief about the limitations of Ohm s Law. 2. State and explain Kirchhoff s laws. 3. Write in brief about disadvantages of series circuit and advantages
CHECK LIST TO CONSIDER THE PROPOSAL FOR REVISION OF SYLLABI OF EXISTING TRADES UNDER CTS/ATS. 1. Name of the Trade: Electrician
CHECK LIST TO CONSIDER THE PROPOSAL FOR REVISION OF SYLLABI OF EXISTING TRADES UNDER CTS/ATS 1. Name of the Trade: Electrician 2. CTS/ATS/Both: CTS & ATS both 3(a) Whether the action to constitute and
MILLWRIGHT. Learner Program Content:
MILLWRIGHT Course Duration On average 45 Months - 18 Months institutional training - 24 Months on-the-job - 03 Months trade test preparation and Trade test Learner Program Content: BASIC PHASE ADVANCED
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK 16EET41 SYNCHRONOUS AND INDUCTION MACHINES UNIT I SYNCHRONOUS GENERATOR 1. Why the stator core is laminated? 2. Define voltage regulation
2-marks question bank UNIT I - TRANSFORMERS UNIT II: AC MACHINES
2-marks question bank UNIT I - TRANSFORMERS 1. What is all day efficiency? 2. What are the applications of auto transformers? 3. Why transformer rating is expressed in KVA? 4. Does transformer draw any
COURSE INFORMATION Electrical Power Sector - (TRADE: ELECTRICIAN)
COURSE INFORMATION Electrical Power Sector - (TRADE: ELECTRICIAN) 1. INTRODUCTION: This course is meant for the candidate who aspires to become Technician in ELECTRICIAN. This course curriculum is revised
2014 ELECTRICAL TECHNOLOGY
SET - 1 II B. Tech I Semester Regular Examinations, March 2014 ELECTRICAL TECHNOLOGY (Com. to ECE, EIE, BME) Time: 3 hours Max. Marks: 75 Answer any FIVE Questions All Questions carry Equal Marks ~~~~~~~~~~~~~~~~~~~~~~~~~~
Electricity Course. Part B Course Outline
Electricity Course Rev. Date: 10/01/2002 By: R. Crompton Part B Course Outline Subject Area 0 Orientation 2.6 0.0 0.1 To the School 1.0 0.2 To the Course 1.0 0.3 To the 0.3 0.3 0.4 To Possible Emergencies
SSC-JE STAFF SELECTION COMMISSION ELECTRICAL ENGINEERING STUDY MATERIAL ELECTRICAL MACHINES
1 SSC-JE STAFF SELECTION COMMISSION ELECTRICAL ENGINEERING STUDY MATERIAL 28-B/7, Jia Sarai, Near IIT, Hauz Khas, New Delhi-110016. Ph. 011-26514888. www.engineersinstitute.com 2 CONTENT 1. : DC MACHINE,
UNIT-I ALTERNATORS PART-A
UNIT-I ALTERNATORS 1. What principle is used in Alternators? 2. What are the requirements of an alternator? 3. Mention the types of alternator rotor. 4. What is hunting in alternators? 5. What are the
UNIT I D.C. MACHINES PART A. 3. What are factors on which hysteresis loss? It depends on magnetic flux density, frequency & volume of the material.
EE6352-ELECTRICAL ENGINEERING AND INSTRUMENTATION UNIT I D.C. MACHINES PART A 1. What is prime mover? The basic source of mechanical power which drives the armature of the generator is called prime mover.
GENERATION, CONVERSION, OR DISTRIBUTION OF ELECTRIC POWER
XXXX H02 GENERATION, CONVERSION, OR DISTRIBUTION OF ELECTRIC POWER XXXX CONTROL OR REGULATION OF ELECTRIC MOTORS, GENERATORS, OR DYNAMO-ELECTRIC CONVERTERS; CONTROLLING TRANSFORMERS, REACTORS OR CHOKE
SYLLABUS. osmania university UNIT - I UNIT - II UNIT - III UNIT - IV CHAPTER - 1 : PRINCIPLES OF ELECTRO-MECHANICAL ENERGY CONVERSION CHAPTER - 2 :
i UNIT - I SYLLABUS osmania university UNIT - II CHAPTER - 1 : PRINCIPLES OF ELECTRO-MECHANICAL ENERGY CONVERSION Energy in Magnetic System, Field Energy and Mechanical Force, Direction of Mechanical Force
SQA Advanced Unit specification: general information
SQA Advanced Unit specification: general information Unit title: Electrical Machine Principles Unit code: HT83 47 Superclass: XJ Publication date: August 2017 Source: Scottish Qualifications Authority
Electrical Machines -II
Objective Type Questions: 1. Basically induction machine was invented by (a) Thomas Alva Edison (b) Fleming (c) Nikola Tesla (d) Michel Faraday Electrical Machines -II 2. What will be the amplitude and
ELECTRICAL MACHINES. Theory and Practice. M.N. Bandyopadhyay
ELECTRICAL MACHINES Theory and Practice M.N. Bandyopadhyay ELECTRICAL MACHINES Theory and Practice M.N. Bandyopadhyay Director National Institute of Technology Kurukshetra Delhi-110092 2014 ELECTRICAL
CHECK LIST TO CONSIDER THE PROPOSAL FOR REVISION OF SYLLABI OF EXISTING TRADES UNDER CTS/ATS. 1. Name of the Trade: Electrician
CHECK LIST TO CONSIDER THE PROPOSAL FOR REVISION OF SYLLABI OF EXISTING TRADES UNDER CTS/ATS 1. Name of the Trade: Electrician 2. CTS/ATS/Both: CTS & ATS both 3(a) Whether the action to constitute and
Basic Electrical Engineering
Basic Electrical Engineering Basic Electrical Engineering Revised Edition Dr. K Uma Rao Professor, Department of Electrical Engineering, R V College of Engineering, Bangalore Dr.A.Jayalakshmi AssociateProfessor,
: HOUSE WIRING. Attendance : 90% attendance is must to appear for the examination COURSE THEORY PRACTICAL TOTAL HOUSE WIRING
HOUSE WIRING COURSE Duration Eligibility : HOUSE WIRING : 3 Months. : Minimum 7 th class pass and able to read and write at least in Telugu Age : Above 14 Years Attendance : 90% attendance is must to appear
EE6351 ELECTRIC DRIVES AND CONTROL UNIT-1 INTRODUTION
EE6351 ELECTRIC DRIVES AND CONTROL UNIT-1 INTRODUTION 1. What is meant by drive and electric drive? Machines employed for motion control are called drives and may employ any one of the prime movers for
ST.ANNE S COLLEGE OF ENGINEERING AND TECHNOLOGY ANGUCHETTYPALAYAM, PANRUTI
ST.ANNE S COLLEGE OF ENGINEERING AND TECHNOLOGY ANGUCHETTYPALAYAM, PANRUTI 607106. QUESTION BANK DECEMBER 2017 - JUNE 2018 / EVEN SEMESTER BRANCH: EEE YR/SEM: II/IV BATCH: 2016-2020 SUB CODE/NAME: EE6401
Lecture PowerPoints. Chapter 21 Physics: Principles with Applications, 7th edition, Global Edition Giancoli
Lecture PowerPoints Chapter 21 Physics: Principles with Applications, 7th edition, Global Edition Giancoli This work is provided solely for the use of instructors in teaching their courses and assessing
EE6352-ELECTRICAL ENGINEERING AND INSTRUMENTATION UNIT I D.C. MACHINES PART A
EE6352-ELECTRICAL ENGINEERING AND INSTRUMENTATION 1. What is prime mover? UNIT I D.C. MACHINES PART A The basic source of mechanical power which drives the armature of the generator is called prime mover.
Historical Development
TOPIC 3 DC MACHINES DC Machines 2 Historical Development Direct current (DC) motor is one of the first machines devised to convert electrical power into mechanical power. Its origin can be traced to the
Handout Activity: HA773
Charging system HA773-2 Handout Activity: HA773 Charging system The charging system allows for a means to recharge the battery and allow for electrical usage of components in the vehicle. The charging
EE6401 ELECTRICAL MACHINES I UNIT I: MAGNETIC CIRCUITS AND MAGNETIC MATERIALS PART: A 1. Define EMF and MMF. 2. Name the main magnetic quantities with their symbols having the following units: Webers,
FOR SUPW CLASSES IN KENDRIYA VIDYALAYAS
FOR SUPW CLASSES IN KENDRIYA VIDYALAYAS CLASSES COVERED: SUBJECTS COVERED: VI TO XII ELECTRICAL / ELECTRONICS ENGINEERING GIST 1. Prepared for all category of students 2. Both theory and practical classes
Syllabus. For the trade of. Under Apprenticeship Training Scheme In the Informal Sector. Designed in 2002
Syllabus For the trade of Battery repairer Under Apprenticeship Training Scheme In the Informal Sector Designed in 2002 Government of India Ministry of Labour (D.G.E.&T.) CENTRAL STAFF TRAINING AND RESEARCH
EE6401 ELECTRICAL MACHINES I UNIT I: MAGNETIC CIRCUITS AND MAGNETIC MATERIALS PART: A 1. Define EMF and MMF. 2. Name the main magnetic quantities
EE6401 ELECTRICAL MACHINES I UNIT I: MAGNETIC CIRCUITS AND MAGNETIC MATERIALS PART: A 1. Define EMF and MMF. 2. Name the main magnetic quantities with their symbols having the following units: Webers,
ESO 210 Introduction to Electrical Engineering
ESO 210 Introduction to Electrical Engineering Lectures-37 Polyphase (3-phase) Induction Motor 2 Determination of Induction Machine Parameters Three tests are needed to determine the parameters in an induction
INTRODUCTION Principle
DC Generators INTRODUCTION A generator is a machine that converts mechanical energy into electrical energy by using the principle of magnetic induction. Principle Whenever a conductor is moved within a
BELT-DRIVEN ALTERNATORS
CHAPTER 13 BELT-DRIVEN ALTERNATORS INTRODUCTION A generator is a machine that converts mechanical energy into electrical energy using the principle of magnetic induction. This principle is based on the
APGENCO/APTRANSCO Assistant Engineer Electrical Previous Question Papers Q.1 The two windings of a transformer is conductively linked. inductively linked. not linked at all. electrically linked. Q.2 A
VALLIAMMAI ENGINEERING COLLEGE
VALLIAMMAI ENGINEERING COLLEGE SRM Nagar, Kattankulathur 603 203. DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING Question Bank EE6401 ELECTRICAL MACHINES I UNIT I: MAGNETIC CIRCUITS AND MAGNETIC
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code : ET(16EE212) Year & Sem: II-B.Tech & II-Sem UNIT I DC GENERATORS Course
Dev Bhoomi Institute Of Technology LABORATORY Department of Electrical And Electronics Engg. Electro-mechanical Energy Conversion II
REV. NO. : REV. DATE : PAGE: 1 Electro-mechanical Energy Conversion II 1. To perform no load and blocked rotor tests on a three phase squirrel cage induction motor and determine equivalent circuit. 2.
Synchronous Generators I. Spring 2013
Synchronous Generators I Spring 2013 Construction of synchronous machines In a synchronous generator, a DC current is applied to the rotor winding producing a rotor magnetic field. The rotor is then turned
ELECTRICAL POWER and POWER ELECTRONICS
Introduction to ELECTRICAL POWER and POWER ELECTRONICS MUKUND R PATEL (cj* CRC Press Taylor & Francis Group Boca Raton London New York CRC Press is an imprint of the Taylor & Francis Croup, an informa
CHAPTER 6 INTRODUCTION TO MOTORS AND GENERATORS
CHAPTER 6 INTRODUCTION TO MOTORS AND GENERATORS Objective Describe the necessary conditions for motor and generator operation. Calculate the force on a conductor carrying current in the presence of the
CENTRAL TEXAS COLLEGE AERM 1314 BASIC ELECTRICITY-G Semester Hours Credit: 3 INSTRUCTOR: OFFICE HOURS:
I. INTRODUCTION CENTRAL TEXAS COLLEGE AERM 1314 BASIC ELECTRICITY-G Semester Hours Credit: 3 INSTRUCTOR: OFFICE HOURS: A. Electricity is a vital part of modern aviation technology. This course lays the
R13 SET - 1. b) Describe different braking methods employed for electrical motors. [8M]
![R13 SET - 1. b) Describe different braking methods employed for electrical motors. [8M]](/thumbs/89/100786446.jpg "R13 SET - 1. b) Describe different braking methods employed for electrical motors. [8M]")
Code No:RT32026 R13 SET - 1 III B. Tech II Semester Regular Examinations, April - 2016 POWER SEMICONDUCTOR DRIVES (Electrical and Electronics Engineering) Time: 3 hours Maximum Marks: 70 Note: 1. Question
Synchronous Generators I. EE 340 Spring 2011
Synchronous Generators I EE 340 Spring 2011 Construction of synchronous machines In a synchronous generator, a DC current is applied to the rotor winding producing a rotor magnetic field. The rotor is
Scheme - I. Sample Question Paper
Program Name Program Code Course Title Sample Question Paper : Diploma in Industrial Electronics : IE : Electrical Machines and Transformers Max. Marks : 70 Time : 3 Hrs. Q1. ATTEMPT ANY FIVE OF THE FOLLOWING.
Comprehensive Technical Training
Comprehensive Technical Training For Sugar Mills Staff on Operation & Maintenance of Baggase Based HP Cogeneration System Schedule: 10 th July to 13 th July, 2017 A.C. GENERATOR Topics Covered. Introduction.
EEE3441 Electrical Machines Department of Electrical Engineering. Lecture. Introduction to Electrical Machines
Department of Electrical Engineering Lecture Introduction to Electrical Machines 1 In this Lecture Induction motors and synchronous machines are introduced Production of rotating magnetic field Three-phase
QUESTION BANK SPECIAL ELECTRICAL MACHINES
SEVENTH SEMESTER EEE QUESTION BANK SPECIAL ELECTRICAL MACHINES TWO MARK QUESTIONS 1. What is a synchronous reluctance 2. What are the types of rotor in synchronous reluctance 3. Mention some applications
Demonstrate knowledge of electrical theory for Electrical Service Technician B
Demonstrate knowledge of electrical theory for Electrical Service Technician B 10937 version 4 Page 1 of 5 Level 3 Credits 3 Purpose 'Electrical Service Technician B' (EST B) refers to a class of electrical
Renewable Energy Systems 13
Renewable Energy Systems 13 Buchla, Kissell, Floyd Chapter Outline Generators 13 Buchla, Kissell, Floyd 13-1 MAGNETISM AND ELECTROMAGNETISM 13-2 DC GENERATORS 13-3 AC SYNCHRONOUS GENERATORS 13-4 AC INDUCTION
Electric Machines CHARLES A. GROSS. Aubum University Auburn, Alabama, U.S.A. LßP) CRC Press Vv* / Taylor & Francis Croup. Boca Raton London New York
Electric Machines CHARLES A. GROSS Aubum University Auburn, Alabama, U.S.A. LßP) CRC Press Vv* / Taylor & Francis Croup Boca Raton London New York CRC Press is an imprint of the Taylor & Francis Group,
Chapter 4 DC Machines
Principles of Electric Machines and Power Electronics Chapter 4 DC Machines Third Edition P. C. Sen Chapter 4 DC machine Electric machine Type: rotating machine Applications: generator (electric source)
List of major equipment in Electrical Enginerring Department Labs
High Voltage Lab (84.10sq.m) 1 150 KV Power Transformer with accessories 2 550 KV Impulse generator with accessories 3 1-Ph. ¼ HP 1425 rpm Motor 4 Surge Potentiometer 400 pfd 550KV 5 Impulse Surge Oscilloscope
Design of Brushless Permanent-Magnet Machines. J.R. Hendershot Jr. T.J.E. Miller
Design of Brushless Permanent-Magnet Machines J.R. Hendershot Jr. T.J.E. Miller Contents 1 GENERAL INTRODUCTION l 1.1 Definitions and types of brushless motor 1 1.2 Commutation,. 4 1.3 Operation of 3-phase
Contents. Chapter No. Title Page No. 1 Overview of a Ship s Electrical System 1. 2 Electrical Safety 41
Chapter No. Title Page No. 1 Overview of a Ship s Electrical System 1 2 Electrical Safety 41 3 Electrical Equipment for Hazardous Areas 83 4 AC Distribution Systems 125 5 Emergency Power and Shore Supply
ELECTRIC MACHINES OPENLAB 0.2 kw
THIS SYSTEM IS A COMPLETE SET OF COMPONENTS AND MODULES SUITABLE FOR ASSEMBLING THE ROTATING ELECTRIC MACHINES, BOTH FOR DIRECT CURRENT AND FOR ALTERNATING CURRENT. STUDENTS CAN PERFORM A CRITICAL AND
ELECTRICAL MAINTENANCE
ELECTRICAL MAINTENANCE II PRACTICAL JOURNAL DATA 1 EXPERIMENT NO. 1 AIM: TO FIND VOLTAGE RATIO OF A GIVEN TRANSFORMER. CIRCUIT DIAGRAM: OBSERVATION TABLE: Sr.No. 1 2 3 4 Primary Voltage (V 1 ) Secondary
VALLIAMMAI ENGINEERING COLLEGE MECHANICAL ENGINEERING ANNA UNIVERSITY CHENNAI II YEAR MECH / III SEMESTER EE6351 - ELECTRICAL DRIVES AND CONTROL (REGULATION 2013) UNIT I INTRODUCTION PART-A (2 MARKS) 1.
A Electric Power / Controls ELECTRIC POWER TECHNOLOGY 0.2 kw
A Electric Power / Controls ELECTRIC POWER TECHNOLOGY 0.2 kw TRAINING SYSTEMS, Shown with optional equipment. The production of energy using renewable natural resources such as wind, sunlight, rain, tides,
(d) None of the above.
Dr. Mahalingam College of Engineering and Technology, Pollachi-3 (An Autonomous Institution affiliated to Anna niversity) CCET II (2016 Regulation) Name of Programme: B.E. (EEE) Course Code & Course Title:
DHANALAKSHMI COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING ME 6351 ELECTRICAL DRIVES AND CONTROL UNIVERSITY QUESTIONS AND ANSWERS
DHANALAKSHMI COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING ME 6351 ELECTRICAL DRIVES AND CONTROL UNIVERSITY QUESTIONS AND ANSWERS 1) What is the Necessity of starter? UNIT 3 Two Marks Both
Regulation: R16 Course & Branch: B.Tech EEE
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (Descriptive) Subject with Code : Electrical Machines-II (16EE215) Regulation: R16 Course & Branch: B.Tech
CHAPTER 8: ELECTROMAGNETISM
CHAPTER 8: ELECTROMAGNETISM 8.1 Effect of a Magnet on a Current-carrying Conductor 8.1.1 Straight Wire Magnetic fields are circular Field is strongest close to the wire Increasing the current increases
DHANALAKSHMI COLLEGE OF ENGINEERING MANIMANGALAM. TAMBARAM, CHENNAI B.E. ELECTRICAL AND ELECTRONICS ENGINEERING
DHANALAKSHMI COLLEGE OF ENGINEERING MANIMANGALAM. TAMBARAM, CHENNAI B.E. ELECTRICAL AND ELECTRONICS ENGINEERING V SEMESTER EE2305 ELECTRICAL MACHINES II LABORATORY LABORATORY MANUAL 1 CONTENT S. No. Name
Second Edition. Power Electronics. Devices and Circuits. V. Jagannathan
Second Edition Power Electronics Devices and Circuits V. Jagannathan Power Electronics Devices and Circuits SECOND EDITION V. Jagannathan Professor and Head Department of Electrical and Electronics Engineering
SYNCHRONOUS GENERATOR (ALTERNATOR)
i SYLLABUS osmania university UNIT - I SYNCHRONOUS MACHINES Constructional Details, Types of Windings, Winding Factors, EMF Equation, Fractional Pitch and Fractional Slot Windings, Suppression of Harmonics
PHY 152 (ELECTRICITY AND MAGNETISM)
PHY 152 (ELECTRICITY AND MAGNETISM) ELECTRIC MOTORS (AC & DC) ELECTRIC GENERATORS (AC & DC) AIMS Students should be able to Describe the principle of magnetic induction as it applies to DC and AC generators.
Using Electricity. Summary Notes. 1. From the Wall Socket Household appliances. Earth wire and safety.
Using Electricity Summary Notes Section Content 1. From the Wall Socket Household appliances. Earth wire and safety. 2. Alternating and Direct Battery and transformer. Current Circuit diagrams. Current
Pretest Module 21 Unit 4 Single-Phase Motors
Pretest Module 21 Unit 4 Single-Phase Motors 1. What are the four main components of a single-phase motor? Rotor, stator, centrifugal switch, end bells and bearings 2. How is a rotating field created in
Danyal Education (Contact: ) A commitment to teach and nurture. c) sketch a graph of voltage output against time for a simple a.c.
(Contact: 9855 9224) Electricity and Magnetism: Electromagnetic Induction (*) (#) Candidates should be able to: a) deduce from Faraday s experiments on electromagnetic induction or other appropriate experiments:
MEBS Utilities services Department of Electrical & Electronic Engineering University of Hong Kong
Brief comparison of induction motors with other types of motors Electric motors exhibit wide variations of speed-torque characteristics. [Adopted from EL-SHARKAWI, Mohamed A., Fundamentals of Electric
Total duration of course = 3 Months (12 weeks) Total training hours = 400 hrs.
1 TRAINING OBJECTIVES: In order to reduce the unemployment and poverty in the society, the curriculum is designed to impart the technical knowledge and skill to those who are literate and.can not do the
COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK SUBJECT CODE & NAME : EE 1001 SPECIAL ELECTRICAL MACHINES
KINGS COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK SUBJECT CODE & NAME : EE 1001 SPECIAL ELECTRICAL MACHINES YEAR / SEM : IV / VII UNIT I SYNCHRONOUS RELUCTANCE
Ch 4 Motor Control Devices
Ch 4 Motor Control Devices Part 1 Manually Operated Switches 1. List three examples of primary motor control devices. (P 66) Answer: Motor contactor, starter, and controller or anything that control the
Question Number: 1. (a)
Session: Summer 2008 Page: 1of 8 Question Number: 1 (a) A single winding machine cannot generate starting torque. During starting the switch connects the starting winding via the capacitor. The capacitor
Part- A Objective Questions (10X1=10 Marks)
Dr. Mahalingam College of Engineering and Technology, Pollachi-3 (An Autonomous Institution) CCET 3(2016Regulation) Name of Programme: B.E. (EEE) Course Code&Course Title: 16EET41 & Synchronous & Induction
Course Name: POWER ELECTRONICS Course Code: EE603 Credit: 4
Course Name: POWER ELECTRONICS Course Code: EE603 Credit: 4 Prerequisites: Sl. No. Subject Description Level of Study 01 Basic Electronics p n junction, Diode, BJT, MOSFET 1 st Sem, 2 nd Sem 02 Circuit
Research and Reviews: Journal of Engineering and Technology
Research and Reviews: Journal of Engineering and Technology Brushless Excitation System of Turbo Generator Komala Koila* Department of Electrical and Electronics, Khammam Institute of Technology and Sciences,
FATIMA MICHAEL COLLEGE OF ENGINEERING & TECHNOLOGY Senkottai Village, Madurai Sivagangai Main Road, Madurai
Department of Mechanical Engineering QUESTION BANK SUBJECT NAME: ELECTRICAL DRIVES AND CONTROL YEAR / SEM: II / III UNIT I INTRODUCTION PART-A (2 MARKS) 1. Define Drives 2. Define Electric Drives. 3. What
S.C.C. Syllabus. Note 3 : A candidate qualifying in part 5 need not qualify further in part 12. SYLLABUS FOR SUPERVISORS. Part-1
S.C.C. Syllabus Certificate For :- Parts Compulsory Wiring for systems not exceeding 650 Volts. : 1 & 2 D.C. Apparatus not exceeding 650 Volts. : 1, 2 & 3 A. C. Apparatus not exceeding 650 Volts. : 1,
Sub:EE6604/DESIGN OF ELECTRICAL MACHINES Unit V SYNCHRONOUS MACHINES. 2. What are the two type of poles used in salient pole machines?
SRI VIDYA COLLEGE OF ENGINEERING & TECHNOLOGY DEPARTMENT OF EEEE QUESTION BANK Sub:EE6604/DESIGN OF ELECTRICAL MACHINES Unit V SYNCHRONOUS MACHINES 1. Name the two types of synchronous machines. 1. Salient
AE105 PRINCIPLES OF ELECTRICAL ENGINEERING JUNE 2014
Q.2 a. Explain in detail eddy current losses in a magnetic material. Explain the factors on which it depends. How it can be reduced? IETE 1 b. A magnetic circuit with a single air gap is shown in given
1. Which device creates a current based on the principle of electromagnetic induction?
Assignment 2 Electromagnetism Name: 1. Which device creates a current based on the principle of electromagnetic induction? A) galvanometer B) generator C) motor D) solenoid 2. The bar magnet below enters
Course Semester Subject Code Subject Name B.E EEE(M) V UAEE507 MARINE ELECTRICAL TECHNOLOGY UNIT-I
Course Semester Subject Code Subject Name B.E EEE(M) V UAEE0 MARINE ELECTRICAL TECHNOLOGY 0 What is Megger? Mention the Uses of Megger How the smoke detecters are working? What is the use of OCR in generator?
Single Phase Induction Motor. Dr. Sanjay Jain Department Of EE/EX
Single Phase Induction Motor Dr. Sanjay Jain Department Of EE/EX Application :- The single-phase induction machine is the most frequently used motor for refrigerators, washing machines, clocks, drills,
14 Single- Phase A.C. Motors I
Lectures 14-15, Page 1 14 Single- Phase A.C. Motors I There exists a very large market for single-phase, fractional horsepower motors (up to about 1 kw) particularly for domestic use. Like many large volume
AXIAL FLUX PERMANENT MAGNET BRUSHLESS MACHINES
AXIAL FLUX PERMANENT MAGNET BRUSHLESS MACHINES Jacek F. Gieras, Rong-Jie Wang and Maarten J. Kamper Kluwer Academic Publishers, Boston-Dordrecht-London, 2004 TABLE OF CONTENETS page Preface v 1. Introduction
ELECTRICAL TECHNOLOGY 3 March 2008
I. Course Description ELECTRICAL TECHNOLOGY 3 March 2008 The purpose for this course is to instruct potential electricians in the skills necessary for entry into the job market. During this course, the
UNIT 2. INTRODUCTION TO DC GENERATOR (Part 1) OBJECTIVES. General Objective
DC GENERATOR (Part 1) E2063/ Unit 2/ 1 UNIT 2 INTRODUCTION TO DC GENERATOR (Part 1) OBJECTIVES General Objective : To apply the basic principle of DC generator, construction principle and types of DC generator.
ELECTRICAL ENGINEERING DEPARTMENT LIST OF EQUIPMENT IN EEM LAB
ELECTRICAL ENGINEERING DEPARTMENT LIST OF EQUIPMENT IN EEM LAB SL.NO. NAME OF THE INSTRUMENT SPECIFICATION 1. 3 Auto Transformer 415/415-470,15amp,15.P.3 2. 3 Resistive Load Box 1A 4,.5 2 3. Measurement
Practical Variable Speed Drives and Power Electronics
Practical Variable Speed Drives and Power Electronics Malcolm Barnes CPEng, BSc(ElecEng), MSEE, Automated Control Systems, Perth, Australia AMSTERDAM BOSTON HEIDELBERG LONDON. NEW YORK OXFORD PARIS SAN
Unit 34 Single-Phase Motors
Unit 34 Single-Phase Motors Objectives: Unit 34 Single-Phase Motors List the different types of split-phase motors. Discuss the operation of split-phase motors. Reverse the direction of rotation of a splitphase
ELECTRICAL INSTALLER THEORY EXAMINATION 21 June 2014 QUESTION AND ANSWER BOOKLET
Candidate Code No. EIN 08 For Board Use Only Result Date Int Result Date Int ELECTRICAL INSTALLER THEORY EXAMINATION 21 June 2014 QUESTION AND ANSWER BOOKLET INSTRUCTIONS READ CAREFULLY Time Allowed: Three
Brake Test On Three Phase Induction Motor Lab Manual
Brake Test On Three Phase Induction Motor Lab Manual Electrical engineering machine lab manual. Brake test on three phase squirrel cage induction motor. No-load &, blocked rotor tests on three phase Slip.