Motor Winding Kit. LabVolt Series. Datasheet
|
|
- Raymond Barton
- 5 years ago
- Views:
Transcription
1 Motor Winding Kit LabVolt Series Datasheet Festo Didactic en 220 V - 60 Hz 07/2018
2 Table of Contents General Description 2 Optional Equipment Required to Operate the Rotating Machines 3 Features & Benefits 3 List of Equipment 3 Manual 3 Table of Contents of the Manual(s) 3 System Specifications 3 Equipment Description 4 General Description The Motor Winding Kit offers a new approach to teaching construction techniques for electrical machines. Starting with basic components such as laminations, motor ends, and magnet wire, the Motor Winding Kit allows the assembly of a squirrel-cage induction motor, a wound-rotor induction motor, a three-phase synchronous machine, and a split-phase capacitor-start motor. All parts necessary for assembly of the four machines are included in the kit. Two types of stator laminations are included for winding a three-phase stator and a single-phase stator. Three types of rotors are included in the kit: a squirrel-cage rotor (completely assembled), a rotor with openslot laminations allowing the winding of a wound rotor, and a rotor with cruciform laminations and a damper assembly, allowing the winding of a four-pole synchronous machine rotor. The rotors are made of a doubleended stainless steel shaft on which the ball bearings and laminations are permanently assembled. There is enough material supplied with the kit to wind each type of machine at least five times. All the necessary materials lacing cord, slot insulators, insulating material, wooden wedges, and insulated magnet wire are included. A hand-operated coil winder fitted with an adjustable mandrel and a turn counter facilitates the assembly of the different windings according to the specifications described in the instruction manual. All tools, such as the plastic mallet, scissors, wire stripper, soldering iron, and compass, are included in the kit. The student manual gives winding data for each machine and describes all winding steps in detail. Once the rotor and stator have been wound, students follow a detailed machine assembly procedure. When the machine has been assembled, it is installed on the support module with clamps and wing nuts. The machine windings are connected to the associated terminals of the module through a polarized plug. Each machine has its own interchangeable face overlay. The nominal rating and the winding schematics are silkscreened on the overlay. Machine components, such as capacitors, centrifugal switches, and potentiometers, are fastened to the machine or to its base with special fasteners without using a tool. Once assembled, machines can be inserted into an EMS workstation and operated just like any preassembled machine. This allows the different characteristics of the machine to be determined. The workstation and equipment required to operate the assembled rotating machines are optional equipment. After completion, machine windings can be removed from the slots to reuse the stator and rotor laminations for another assembly. 2 Festo Didactic
3 Optional Equipment Required to Operate the Rotating Machines The rotating machines assembled using the Motor Winding Kit can be operated just like any preassembled machine. To do so, the following optional equipment is required: Workstation, Model , or Mobile Workstation, Model Resistive Load, Model 8311 Power Supply, Model Connection Leads, Model 8951-L Four-Quadrant Dynamometer/Power Supply, Model 8960-B Data Acquisition and Control Interface, Model 9063-B Features & Benefits High-quality components designed for hands-on training purposes Complete assembly kit that can be reused many times Nominal rating and the winding schematics are silk-screened on the overlay to facilitate learning Cost-efficient Complete curriculum with instructions Estimated program duration: 40 hours List of Equipment Qty Description Model number 1 Work Bench for the Motor Winding Kit Assembly Housing Module Motor Winding Kit Parts E 1 Manual Coil Winder Manual Manual Description number Winding Kit (Student Manual) E Table of Contents of the Manual(s) Winding Kit (Student Manual) ( E) 1 Equipment familiarization 2 Split-Phase Capacitor-Start Motor 3 Three-Phase Squirrel Cage Induction Motor 4 Three-Phase Wound-Rotor Induction Motor 5 Synchronous Machine System Specifications Parameter Value Festo Didactic 3
4 Equipment Description Work Bench for the Motor Winding Kit The Work Bench for the Motor Winding Kit is a mobile work bench with a component storage area and a work surface for machine assembly that is specifically designed for the Motor Winding Kit, Model Assembly Housing Module The Assembly Housing Module consists of an empty motor-size module specially designed to house the dissectible machines of the Dissectible Machines Training System, Model 8020, or the electrical machines of the Motor Winding Kit, Model Specifications Parameter Can house: Value DC Motor/Generator, Model 8211 Four-Pole Squirrel-Cage Induction Motor, Model 8221 Dahlander Two-Speed Constant Power Induction Motor, Model 8223 Dahlander Two-Speed Variable Torque Induction Motor, Model 8224 Dahlander Two-Speed Constant Torque Induction Motor, Model 8225 Three-Phase Wound-Rotor Induction Motor, Model 8231 Two-Phase Wound-Rotor Induction Motor, Model 8233 Three-Phase Synchronous Motor/Generator, Model 8241 Three-Phase Synchronous Reluctance Motor, Model 8246 Capacitor-Start Motor, Model 8251 Capacitor-Run Motor, Model Festo Didactic
5 Parameter Value Universal Motor, Model 8254 Two-Value Capacitor Motor, Model 8259 Triple-Rate Motor, Model 8266 Squirrel-Cage Induction Motor Wound-Rotor Induction Motor Three-Phase Synchronous Machine Split-Phase Capacitor-Start Motor Motor Winding Kit Parts E The Motor Winding Kit Parts include the necessary materials - lacing cord, slot insulators, insulating material, wooden wedges, and insulated magnet wire - to construct five times all machines in the Motor Winding Kit, Model Manual Coil Winder The Manual Coil Winder is a handoperated coil winder fitted with an adjustable mandrel and a turn counter. This equipment facilitates the construction of the different machine windings according to the specifications described in the instruction manual of the Motor Winding Kit, Model Festo Didactic 5
6 Reflecting the commitment of Festo Didactic to high quality standards in product, design, development, production, installation, and service, our manufacturing and distribution facility has received the ISO 9001 certification. Festo Didactic reserves the right to make product improvements at any time and without notice and is not responsible for typographical errors. Festo Didactic recognizes all product names used herein as trademarks or registered trademarks of their respective holders. Festo Didactic Inc All rights reserved. Festo Didactic SE Rechbergstrasse Denkendorf Germany P. +49(0)711/ F. +49(0)711/ Festo Didactic Inc. 607 Industrial Way West Eatontown, NJ United States P F Festo Didactic Ltée/Ltd 675 rue du Carbone Québec QC G2N 2K7 Canada P F Festo Didactic
Motor Drives Training System (Stand-Alone, 120 V Version) (8036-C0)
Motor Drives Training System (Stand-Alone, 120 V Version) 581526 (8036-C0) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 11/2018 Table of Contents General Description 2 List of Equipment 2 List
More informationVariable-Frequency Drive Training System
3356-00 Variable-Frequency Drive Training System LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 05/2018 Table of Contents General Description 2 Components 3 Carrying Case 4 Courseware 4 Topic
More informationHydraulics Simulation Software (LVSIM -HYD) - 10 Users Network (6385-Q0)
Hydraulics Simulation Software (LVSIM -HYD) - 10 Users Network 588018 (6385-Q0) LabVolt Datasheet Festo Didactic en 12/2018 Table of Contents General Description 2 Features 2 Hydraulics Equipment 3 Computer
More information8036-A0 Motor Drives Training System (Stand-Alone)
8036-A0 Motor Drives Training System (Stand-Alone) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 04/2018 Table of Contents General Description 2 List of Equipment 2 List of Manuals 2 Table of
More informationElectro-Mechanical Training System with DC Motor
Electro-Mechanical Training System with DC Motor LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 07/2018 Table of Contents General Description 2 PLC Compatibility 2 Features & Benefits 2 List
More informationHydraulics and Pneumatics Simulation Software (LVSIM -HYD & PNEU) - 1 User
6387-00 Hydraulics and Pneumatics Simulation Software (LVSIM -HYD & PNEU) - User LabVolt Series Datasheet Festo Didactic en 02/208 Table of Contents General Description 2 Topic Coverage 2 Features & Benefits
More informationHydrogen Fuel Cell Training System
8010-80 Hydrogen Fuel Cell Training System LabVolt Series Datasheet Festo Didactic en 03/2018 Table of Contents General Description 2 Exercises 3 Features & Benefits 3 List of Equipment 4 List of Manuals
More informationHydrogen Fuel Cell Training System ( )
Hydrogen Fuel Cell Training System 579307 (8010-80) LabVolt Series Datasheet Festo Didactic en 10/2018 Table of Contents General Description 2 Exercises 3 Features & Benefits 3 List of Equipment 4 List
More information0.2 kw Electric Power Transmission Training System
0.2 kw Electric Power Transmission Training System LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 07/2018 Table of Contents General Description 2 Topic Coverage 3 Features & Benefits 3 List of
More informationSmall-Scale Wind Power Electricity Generation Training System
Small-Scale Wind Power Electricity Generation Training System LabVolt Series Datasheet Festo Didactic en 220 V - 60 Hz 04/2018 Table of Contents General Description 2 Courseware 3 Modular Design Approach
More informationLead-Acid Batteries Training System
8010-45 Lead-Acid Batteries Training System LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 03/2018 Table of Contents General Description 2 Courseware 3 Modular Design Approach 4 Features & Benefits
More informationIndustrial Wiring Training Systems
Industrial Wiring Training Systems LabVolt Series Datasheet Festo Didactic en 220 V - 60 Hz 07/2018 Table of Contents General Description 2 The Mobile Workstation 2 Tools Required 3 Courseware 3 Consumables
More informationUnit 34 Single-Phase Motors
Unit 34 Single-Phase Motors Objectives: Unit 34 Single-Phase Motors List the different types of split-phase motors. Discuss the operation of split-phase motors. Reverse the direction of rotation of a splitphase
More information2 kw Electromechanical Training Systems
2 kw Electromechanical Training Systems LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 07/2018 Table of Contents General Description 2 Load Modules 3 Metering Modules 3 Courseware 3 Features
More informationAC MOTOR TYPES. DESCRIBE how torque is produced in a single-phase AC motor. EXPLAIN why an AC synchronous motor does not have starting torque.
Various types of AC motors are used for specific applications. By matching the type of motor to the appropriate application, increased equipment performance can be obtained. EO 1.5 EO 1.6 EO 1.7 EO 1.8
More informationSingle-Phase Induction Motors
Electricity and New Energy Single-Phase Induction Motors Student Manual 88944-00 Order no.: 88944-00 First Edition Revision level: 11/2014 By the staff of Festo Didactic Festo Didactic Ltée/Ltd, Quebec,
More informationPower Electronics Training System
Power Electronics Training System LabVolt Series Datasheet Festo Didactic en 220 V - 60 Hz 07/2018 Table of Contents General Description 2 Courseware 5 Modular Design Approach 5 Features & Benefits 5 List
More informationNacelle - Wind Turbine Learning System ( )
Nacelle - Wind Turbine Learning System 8046643 (46122-10) LabVolt Series Datasheet Festo Didactic en 0 V - 0 Hz 11/2018 Table of Contents General 2 Mobile Workstation 2 Yaw System 3 Drive Train (Low Speed)
More information46120 Solar/Wind Energy Training Systems
46120 Solar/Wind Energy Training Systems LabVolt Series Datasheet Festo Didactic en 220 V - 60 Hz 04/2018 Table of Contents General Description 2 Courseware 2 elearning Formats 3 Topic Coverage 3 Features
More informationSolar/Wind Energy Training Systems
Solar/Wind Energy Training Systems LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 07/2018 Table of Contents General Description 2 Courseware 2 elearning Formats 3 Topic Coverage 3 Features &
More informationElectromechanical Training System
Electromechanical Training System LabVolt Series Datasheet Festo Didactic en 240 V - 50 Hz 06/2018 Table of Contents General Description 2 Courseware 3 Modular Design Approach 4 Features & Benefits 4 List
More informationELECTRIC MACHINES OPENLAB 0.2 kw
THIS SYSTEM IS A COMPLETE SET OF COMPONENTS AND MODULES SUITABLE FOR ASSEMBLING THE ROTATING ELECTRIC MACHINES, BOTH FOR DIRECT CURRENT AND FOR ALTERNATING CURRENT. STUDENTS CAN PERFORM A CRITICAL AND
More informationThe Wound-Rotor Induction Motor Part I
Experiment 1 The Wound-Rotor Induction Motor Part I OBJECTIVE To examine the construction of the three-phase wound-rotor induction motor. To understand exciting current, synchronous speed and slip in a
More informationPower Electronics Training System
Power Electronics Training System LabVolt Series Datasheet Festo Didactic en 240 V - 50 Hz 07/2018 Table of Contents General Description 2 Courseware 5 Modular Design Approach 5 Features & Benefits 5 List
More informationIndustrial Controls Training Systems
Industrial Controls Training Systems LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 04/2018 Table of Contents General Description 2 Integration into 8001 and 8006 Electromechanical Training Systems
More informationPretest Module 21 Unit 4 Single-Phase Motors
Pretest Module 21 Unit 4 Single-Phase Motors 1. What are the four main components of a single-phase motor? Rotor, stator, centrifugal switch, end bells and bearings 2. How is a rotating field created in
More informationINDUCTION MOTOR. There is no physical electrical connection to the secondary winding, its current is induced
INDUCTION MOTOR INTRODUCTION An induction motor is an alternating current motor in which the primary winding on one member (usually the stator) is connected to the power source and a secondary winding
More informationConventional DC Machines and Universal Motor
Electricity and New Energy Conventional DC Machines and Universal Motor Student Manual 88943-00 Order no.: 88943-00 First Edition Revision level: 01/2015 By the staff of Festo Didactic Festo Didactic Ltée/Ltd,
More informationExercise 2-1. The Separately-Excited DC Motor N S EXERCISE OBJECTIVE DISCUSSION OUTLINE DISCUSSION. Simplified equivalent circuit of a dc motor
Exercise 2-1 The Separately-Excited DC Motor EXERCISE OBJECTIVE When you have completed this exercise, you will be able to demonstrate the main operating characteristics of a separately-excited dc motor
More informationDate: Name: ID: LABORATORY EXPERIMENT NO. 8 INDUCTION MOTOR/GENERATOR 8-1
Date: Name: ID: LABORATORY EXPERIMENT NO. 8 INDUCTION MOTOR/GENERATOR 8-1 OBJECT 1. To determine the general performance of a squirrel motors 2. To observe the characteristics of induction generators.
More informationHYDROGEN FUEL CELL TRAINING SYSTEM
Alternative & Renewable Energy HYDROGEN FUEL CELL TRAINING SYSTEM Hydrogen Fuel Cell Training System, Model 8010-80 GENERAL DESCRIPTION Lab-Volt now offers a Hydrogen Fuel Cell Training System, designed
More informationArmature Reaction and Saturation Effect
Exercise 3-1 Armature Reaction and Saturation Effect EXERCISE OBJECTIVE When you have completed this exercise, you will be able to demonstrate some of the effects of armature reaction and saturation in
More informationEXPERIMENT 2 THREE PHASE INDUCTION MOTOR, PART 1
University f Jordan School of Engineering Department of Mechatronics Engineering Electrical Machines Lab Eng. Osama Fuad Eng. Nazmi Ashour EXPERIMENT 2 THREE PHASE INDUCTION MOTOR, PART 1 OBJECTIVES To
More informationPermanent Magnet DC Motor Operating as a Generator
Exercise 2 Permanent Magnet DC Motor Operating as a Generator EXERCIE OBJECTIVE When you have completed this exercise, you will be familiar with the construction of permanent magnet dc motors as well as
More informationInstitute of Technology, Nirma University B. Tech. Sem. V: Electrical Engineering 2EE305: ELECTRICAL MACHINES II. Handout: AC Commutator Motors
Institute of Technology, Nirma University B. Tech. Sem. V: Electrical Engineering 2EE305: ELECTRICAL MACHINES II Handout: AC Commutator Motors Prepared by: Prof. T. H. Panchal Learning Objective: Introduction
More informationTransparent and Functional Motors Application AEL-FTM
Engineering and Technical Teaching Equipment Transparent and Functional Motors Application AEL-FTM INTRODUCTION The electric machines have a special importance considering that they are involved in the
More informationELECTRIC MACHINES EUROLAB 0.3 kw
index SINGLE-PHASE MOTORS SPLIT-PHASE MOTOR DL 30130 CAPACITOR MOTOR DL 30140 UNIVERSAL MOTOR DL 30150 REPULSION MOTOR DL 30170 THREE PHASE ASYNCHRONOUS MOTORS SQUIRREL CAGE THREE PHASE ASYNCHRONOUS MOTOR
More informationMotor Basics AGSM 325 Motors vs Engines
Motor Basics AGSM 325 Motors vs Engines Motors convert electrical energy to mechanical energy. Engines convert chemical energy to mechanical energy. 1 Motors Advantages Low Initial Cost - $/Hp Simple &
More information2014 ELECTRICAL TECHNOLOGY
SET - 1 II B. Tech I Semester Regular Examinations, March 2014 ELECTRICAL TECHNOLOGY (Com. to ECE, EIE, BME) Time: 3 hours Max. Marks: 75 Answer any FIVE Questions All Questions carry Equal Marks ~~~~~~~~~~~~~~~~~~~~~~~~~~
More information9. Examples of hydro energy conversion
9. Examples of hydro energy conversion VATech Hydro, Austria Prof. A. Binder 9/1 Variable speed pump storage power plant Prof. A. Binder 9/2 Conventional pump storage power plant with synchronous motor-generators
More informationECE 325 Electric Energy System Components 6 Three Phase Induction Motors. Instructor: Kai Sun Fall 2016
ECE 325 Electric Energy System Components 6 Three Phase Induction Motors Instructor: Kai Sun Fall 2016 1 Content (Materials are from Chapters 13-15) Components and basic principles Selection and application
More informationPrinciples of Doubly-Fed Induction Generators (DFIG)
Renewable Energy Principles of Doubly-Fed Induction Generators (DFIG) Courseware Sample 86376-F0 A RENEWABLE ENERGY PRINCIPLES OF DOUBLY-FED INDUCTION GENERATORS (DFIG) Courseware Sample by the staff
More informationStarting of Induction Motors
1- Star Delta Starter The method achieved low starting current by first connecting the stator winding in star configuration, and then after the motor reaches a certain speed, throw switch changes the winding
More informationMotor-Generator and Transformer Construction Application AEL-MGTC
Engineering and Technical Teaching Equipment Motor-Generator and Transformer Construction Application AEL-MGTC INDUCTION MOTOR DISASSEMBLY ISO 9001: Quality Management (for Design, Manufacturing, Commercialization
More informationINTRODUCTION. AC motor operations, most widely used motor is three phase induction motor. This type of motor does not require any starting device
Modular Application (AC Motors) Engineering and Technical Teaching Equipment AEL-AI12 INTRODUCTION An electrical motor is such an electromechanical device which converts electrical energy into a mechanical
More informationPart- A Objective Questions (10X1=10 Marks)
Dr. Mahalingam College of Engineering and Technology, Pollachi-3 (An Autonomous Institution) CCET 3(2016Regulation) Name of Programme: B.E. (EEE) Course Code&Course Title: 16EET41 & Synchronous & Induction
More informationAPGENCO/APTRANSCO Assistant Engineer Electrical Previous Question Papers Q.1 The two windings of a transformer is conductively linked. inductively linked. not linked at all. electrically linked. Q.2 A
More informationSECTION 4 ELECTRIC MOTORS UNIT 17: TYPES OF ELECTRIC MOTORS UNIT OBJECTIVES UNIT OBJECTIVES 3/21/2012
SECTION 4 ELECTRIC MOTORS UNIT 17: TYPES OF ELECTRIC MOTORS UNIT OBJECTIVES After studying this unit, the reader should be able to Describe the different types of open single-phase motors used to drive
More informationWORK BENCHES FOR ELECTRIC INSTALLATIONS. index
index WORK BENCHES TWO PLACE WORK BENCH WITH 2 INDEPENDENT SUPPLIES DL 1101 FOUR PLACE WORK BENCH WITH 4 INDEPENDENT SUPPLIES DL 1103 FOUR PLACE WORK BENCH WITH 2 INDEPENDENT SUPPLIES DL 1104 TWO PLACE
More informationDEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1
It is the mark of an educated mind to be able to entertain a thought without accepting it. DEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1 1. Explain the Basic concepts of rotating machine. 2. With help
More informationELECTRIC MACHINES EUROLAB 0.3 kw
index SINGLE-PHASE MOTORS SPLIT-PHASE MOTOR DL 30130 CAPACITOR MOTOR DL 30140 UNIVERSAL MOTOR DL 30150 REPULSION MOTOR DL 30170 THREE PHASE ASYNCHRONOUS MOTORS SQUIRREL CAGE THREE PHASE ASYNCHRONOUS MOTOR
More information9/7/2010. Chapter , The McGraw-Hill Companies, Inc. MOTOR CLASSIFICATION. 2010, The McGraw-Hill Companies, Inc.
Chapter 2 MOTOR CLASSIFICATION 1 In general, motors are classified according to the type of power used (AC or DC) and the motor's principle of operation. AC DC Motor Family Tree 2 DC MOTOR CONNECTIONS
More informationPAC TRAINING PUMP MOTORS
PAC TRAINING PUMP MOTORS 1 Basics Magnet supported from above N S N S Since unlike poles repel each other, the magnet will rotate Stationary Magnet 2 Basics N S Stationary Magnet 3 Basics N N S S Stationary
More informationSingle Phase Induction Motor. Dr. Sanjay Jain Department Of EE/EX
Single Phase Induction Motor Dr. Sanjay Jain Department Of EE/EX Application :- The single-phase induction machine is the most frequently used motor for refrigerators, washing machines, clocks, drills,
More informationMost home and business appliances operate on single-phase AC power. For this reason, singlephase AC motors are in widespread use.
Chapter 5 Most home and business appliances operate on single-phase AC power. For this reason, singlephase AC motors are in widespread use. A single-phase induction motor is larger in size, for the same
More informationLoad Test On 3 Phase Slip Ring Induction Motor Lab Manual
Load Test On 3 Phase Slip Ring Induction Motor Lab Manual Electrical engineering machine lab manual. Brake test on three phase squirrel cage induction motor. No-load &, blocked rotor tests on three phase
More informationElectrical Machines and Energy Systems: Overview SYED A RIZVI
Electrical Machines and Energy Systems: Overview SYED A RIZVI Electrical Machines and Energy Systems Deal with the generation, transmission & distribution, and utilization of electric power. This course
More informationPumps Training Systems
Pumps Training Systems LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 07/2018 Table of Contents General Description 2 Innovative Design 3 Courseware 3 Typical Pump Applications 4 Included in
More informationROTATING MAGNETIC FIELD
Chapter 5 ROTATING MAGNETIC FIELD 1 A rotating magnetic field is the key to the operation of AC motors. The magnetic field of the stator is made to rotate electrically around and around in a circle. Stator
More informationPretest Module 21 Units 1-4 AC Generators & Three-Phase Motors
Pretest Module 21 Units 1-4 AC Generators & Three-Phase Motors 1. What are the two main parts of a three-phase motor? Stator and Rotor 2. Which part of a three-phase squirrel-cage induction motor is a
More informationElectrical Machines -II
Objective Type Questions: 1. Basically induction machine was invented by (a) Thomas Alva Edison (b) Fleming (c) Nikola Tesla (d) Michel Faraday Electrical Machines -II 2. What will be the amplitude and
More informationElectric Power Technology Training Systems
Electric Power Technology Training Systems 8010-00 LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 03/2019 Table of Contents General Description 3 Electric Power Technology Training Program 4
More informationESO 210 Introduction to Electrical Engineering
ESO 210 Introduction to Electrical Engineering Lectures-37 Polyphase (3-phase) Induction Motor 2 Determination of Induction Machine Parameters Three tests are needed to determine the parameters in an induction
More informationShape - Typical designs with sector angles of pi/2 [90 degrees], and 2pi/3 [120 degrees] are shown below.
Sector Torus Cores Started 01 Jun 012 By Newton E. Ball Definitions - Torus - Restricted to Circular Torus, the solid shape formed by the rotation of a circular area, about an axis that is external to
More informationDesign Standard. Electric Motors. Detailed specifications follow. PART 1 - GENERAL
Design Standard Detailed specifications follow. PART 1 - GENERAL 1.01 SCOPE This design guidelines contained herein include the requirements of electric motors utilized for electric motor driven systems
More informationPump Specifications LE40 Series 4/10 HP Submersible Sewage Pump Pump
Pump Specifications LE40 Series 4/10 HP Submersible Sewage Pump Pump LE40_P1 R8/17/2017 Copyright 2017 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE40-Series
More informationPump Specifications. LE50 Series ½ HP Submersible Sewage Pump
Pump Specifications LE50 Series ½ HP Submersible Sewage Pump LE50_P1 R11/16/2015 Copyright 2015 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE50-Series Dimensional
More informationExercise 7. Thyristor Three-Phase Rectifier/Inverter EXERCISE OBJECTIVE DISCUSSION OUTLINE DISCUSSION. Thyristor three-phase rectifier/inverter
Exercise 7 Thyristor Three-Phase Rectifier/Inverter EXERCISE OBJECTIVE When you have completed this exercise, you will know what a thyristor threephase rectifier/limiter (thyristor three-phase bridge)
More informationPump Specifications. ELV Series Submersible Sump Pump with OilTector Control. ELV250 1/3 hp ELV280 1/2 hp ELV290 3/4 hp
Pump Specifications ELV Series Submersible Sump Pump with OilTector Control ELV250 1/3 hp ELV280 1/2 hp ELV290 3/4 hp ELV_ P1 R1/24/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications
More information1-3 RAMP AND TORQUE BOOST EXERCISE OBJECTIVE
1-3 RAMP AND TORQUE BOOST EXERCISE OBJECTIVE Understand the acceleration and deceleration time settings. Introduce the linear and S-shape acceleration and deceleration patterns. Introduce the Torque boost
More informationPermanent Magnet DC Motor
Electricity and New Energy Permanent Magnet DC Motor Student Manual 86357-00 Order no.: 86357-00 Revision level: 12/2014 By the staff of Festo Didactic Festo Didactic Ltée/Ltd, Quebec, Canada 2011 Internet:
More informationPump Specifications FL50 Series 1/2 hp Submersible Effluent Pump
Head (Feet) Head (Meters) Pump Specifications FL50 Series 1/2 hp Submersible Effluent Pump Flow (Liters Per Minute) 60 0 38 76 114 151 189 227 265 303 341 379 18 50 15 40 12 30 9 20 6 10 3 0 0 0 10 20
More informationFesto Didactic: LabVolt Series Training Systems A whole new range of possibilities
Festo Didactic: LabVolt Series Training Systems A whole new range of possibilities Sharing Your Commitment to Technical Education Origins of the LabVolt Series by Festo Didactic For the last 50 years,
More informationPump Specifications LE70-Series 3/4 HP Submersible Sewage Pump
Pump Specifications LE70-Series 3/4 HP Submersible Sewage Pump LE70-P1 R9/3/2013 Copyright 2013 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE70-Series Dimensional
More informationMotors Series 1, 2 and 3
Motors Series 1, 2 and 3 Series 1 Rotating Machines The Hampden Series 1 complement of one horsepower AC and DC motors and generators provide instructors a large measure of flexibility in teaching electrical
More informationPump Specifications 290 Series 3/4 hp Submersible Effluent Pump
Pump Specifications 290 Series 3/4 hp Submersible Effluent Pump 290_P1 R09/7/2011 Copyright 2011 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. 290-Series Dimensional
More informationPump Specifications LE70-Series 3/4 HP Submersible Sewage Pump
Pump Specifications LE70-Series 3/4 HP Submersible Sewage Pump LE70-P1 R3/2/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE70-Series Dimensional
More informationPump Specifications 280 Series 1/2 hp Submersible Effluent Pump
Pump Specifications 280 Series 1/2 hp Submersible Effluent Pump 280_P1 R01/24/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. 280-Series Dimensional
More informationTo discover the factors affecting the direction of rotation and speed of three-phase motors.
EXPERIMENT 12 Direction of Rotation of Three-Phase Motor PURPOSE: To discover the factors affecting the direction of rotation and speed of three-phase motors. BRIEFING: The stators of three-phase motors
More informationScope for Electrical Machine Design. Objectives. Design and Engineering. Course Description. 23-Dec-16 DESIGN OF ELECTRICAL MACHINES AN OVERVIEW
SNS COLLEGE OF ENGINEERING (Accredited by NAAC-UGC with A Grade, Approved by AICTE, Recognized by UGC and Affiliated to Anna University, Chennai) COIMBATORE 641 107 DEPARTMENT OF ELECTRICAL AND ELECTRONICS
More informationELECTRIC MACHINES UNILAB 1 kw
index SINGLE-PHASE MOTORS SPLIT PHASE MOTOR DL 1028 CAPACITOR MOTOR DL 1028C UNIVERSAL MOTOR DL 1029 REPULSION MOTOR DL 1029R THREE-PHASE ASYNCHRONOUS MOTORS SQUIRREL CAGE THREE PHASE ASYNCHRONOUS MOTOR
More informationPump Specifications LE100-Series 1HP Submersible Sewage Pump
Pump Specifications LE100-Series 1HP Submersible Sewage Pump LE100-P1 R8/5/2014 Copyright 2014 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE100-Series Dimensional
More informationPermanent Magnet DC Motor
Renewable Energy Permanent Magnet DC Motor Courseware Sample 86357-F0 A RENEWABLE ENERGY PERMANENT MAGNET DC MOTOR Courseware Sample by the staff of Lab-Volt Ltd. Copyright 2011 Lab-Volt Ltd. All rights
More informationES09 ELECTRICAL MACHINES TECHNICAL SPECIFICATIONS
ES09 ELECTRICAL MACHINES TECHNICAL SPECIFICATIONS The Electrical Machines Trainer is produced in consistency with the training programs of the electrical and electronics engineering and teaching departments
More informationAEL-4. Advanced Electrical Laboratories (AEL-LABS): Electromechanical Constructions Lab. Engineering and Technical Teaching Equipment
Engineering and Technical Teaching Equipment Advanced Electrical Laboratories (AEL-LABS): Electromechanical Constructions Lab AEL-4 PRODUCTS 40.- ELECTRICITY AEL-1. ELECTRICAL INSTALLATIONS LAB AEL-2.
More informationDepartment of Electrical and Computer Engineering
Page 1 of 1 Faculty of Engineering, Architecture and Science Department of Electrical and Computer Engineering Course Number EES 612 Course Title Electrical Machines and Actuators Semester/Year Instructor
More informationThe Electromagnet. Electromagnetism
The Electromagnet When you have completed this exercise, you will be able to explain the operation of an electromagnet by using a coil of wire. You will verify your results with a compass and an iron nail.
More informationComprehensive Technical Training
Comprehensive Technical Training For Sugar Mills Staff on Operation & Maintenance of Baggase Based HP Cogeneration System Schedule: 10 th July to 13 th July, 2017 A.C. GENERATOR Topics Covered. Introduction.
More informationHYDROMATIC SPX50/SPX50H EXPLOSION PROOF, SEWAGE EJECTOR
PERFORMANCE DATA Wholesale Products Page: 6800-1 SPX50 RPM: 1750 Discharge: 2 Solids: 2 SPX50H RPM: 1750 Discharge: 1 ½ Solids: ¾ 40 35 TOTAL HEAD IN FEET 30 25 20 SPX50 SPX50H 15 10 0 10 20 30 40 50 60
More informationNOTE: LEH100-Series high-head pumps require a minimum application of 15' head. Do not use pump in this area use a smaller pump.
Pump Specifications LEH100-Series 1HP Submersible Sewage Pump NOTE: LEH100-Series high-head pumps require a minimum application of 15' head. Do not use pump in this area use a smaller pump. LEH100-P1 R12/19/2012
More informationPump Specifications 250 Series Submersible Sump / Effluent Pump
Pump Specifications 250 Series Submersible Sump / Effluent Pump 250_P1 R1/24/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. 250-Series Dimensional
More informationPretest Module 21 Units 1-3 AC Generators & Three-Phase Motors
Pretest Module 21 Units 1-3 AC Generators & Three-Phase Motors 1. What are the two main parts of a three-phase 2. Which part of a three-phase squirrel-cage induction motor is a hollow core? 3. What are
More informationECET 211 Electric Machines & Controls Lecture 5-1 Electric Motors. Lecture 5-1 Electric Motors
ECET 211 Electric Machines & Controls Lecture 5-1 Electric Motors (2 of 4) Text Book: Chapter 5 Electric Motors, Electric Motors and Control Systems, by Frank D. Petruzella, published by McGraw Hill, 2015.
More informationBasic Renewable Energy Training System
Basic Renewable Energy Training System LabVolt Series Datasheet Festo Didactic en 220 V - 60 Hz 07/2018 Table of Contents General Description 2 Courseware 3 Modular Design Approach 4 Features & Benefits
More informationMultiple Pump Systems
Industrial Maintenance Pumps Training System Multiple Pump Systems Job Sheets - Courseware Sample 37895-F0 Order no.: 37895-30 First Edition Revision level: 08/2015 By the staff of Festo Didactic Festo
More informationAlternating Current Machines SAMPLE. Learner Workbook. Version 1. Training and Education Support Industry Skills Unit Meadowbank. Product Code: 5633
Learner Workbook Version 1 Training and Education Support Industry Skills Unit Meadowbank Product Code: 5633 Contents Introduction... 5 Section 1: Operating Principles of Three-Phase Induction Motors.7
More informationPump Specifications FL60/FLH60 Series 6/10 hp Submersible Effluent Pump
Head (Feet) Head (Meters) Pump Specifications FL60/FLH60 Series 6/10 hp Submersible Effluent Pump 70 Flow (Liters Per Minute) 0 38 76 114 151 189 227 265 303 341 379 21 FLH 60 60 FL 60 18 50 15 40 12 30
More informationIndustrial Maintenance. Gear Drives 1. Courseware Sample F0
Industrial Maintenance Gear Drives 1 Courseware Sample 36893-F0 Order no.: 36893-70 First Edition Revision level: 08/2015 By the staff of Festo Didactic Festo Didactic Ltée/Ltd, Quebec, Canada 2005 Internet:
More informationBrake Test On Three Phase Induction Motor Lab Manual
Brake Test On Three Phase Induction Motor Lab Manual Electrical engineering machine lab manual. Brake test on three phase squirrel cage induction motor. No-load &, blocked rotor tests on three phase Slip.
More informationMotors- Basic principles. Expertise, performance, innovation
Motors- Basic principles Expertise, performance, innovation As a leading supplier of ventilation and drive engineering technology, ebm-papst is a highly respected engineering partner in many industries.
More information