ES09 ELECTRICAL MACHINES TECHNICAL SPECIFICATIONS

Size: px

Start display at page:

Download "ES09 ELECTRICAL MACHINES TECHNICAL SPECIFICATIONS"

Buck Thomas
5 years ago
Views:

ES09 ELECTRICAL MACHINES TECHNICAL SPECIFICATIONS The Electrical Machines Trainer is produced in consistency with the training programs of the electrical and electronics engineering and teaching

1 ES09 ELECTRICAL MACHINES TECHNICAL SPECIFICATIONS The Electrical Machines Trainer is produced in consistency with the training programs of the electrical and electronics engineering and teaching departments of the universities and those of the vocational education collages. The machinery equipment provided with the sets has an average power of 1.5 kw. Security has been given top importance so in this respect leakage current circuit breaker, emergency stop button, protective fuses at all outputs and special spring type safety sockets with the connectors and the leads to protect against electrical shocks are widely used in all of the sets. The connectors in all the electrical machines are wired to a terminal box via 2.5 mm 2 special cable sockets. There are skid-rail and coupling elements useable on the power bench to avoid vibrations caused by the operating motors. The Electrical Machines Trainer Set consists of six different subsets: Asynchronous Machines Experiment Set Dc Machines Experiment Set Synchonous Machines Experiment Set Transformers Experiment Set Control Techniques Experiment Set General Material Pockets

Asynchronous Machines Experiment Set Induction machine has three phase stator winding and squirrel cage burried in the rotor. It is suitable for working as motor and alternator.

2 Asynchronous Machines Experiment Set Induction machine has three phase stator winding and squirrel cage burried in the rotor. It is suitable for working as motor and alternator. All of connections socket are on the motor connection box. It has a suitable frame for coupling the other machines at the same cradle-monted housing. It can be used for testing: Slip test of three phase asynchronous motor. No load test of three phase asynchronous motor. Short -circuit test of three phase asynchronous motor. Circle diagram drawing test of three phase asynchronous motor. Load test of three phase asynchronous motor. Working as an alternator test of three phase asynchronous machine. Synchronized test of three phase asynchronous motor. Working monophase test of three phase asynchronous motor. No load test of single phase asynchronous motor Reversing working

Dc Machines Experiment Set The direct current machine is used as series, compound, shunt, external excitation motor and generator. All of connections socket are on the motor connection box.

3 Dc Machines Experiment Set The direct current machine is used as series, compound, shunt, external excitation motor and generator. All of connections socket are on the motor connection box. It has a suitable frame for coupling the other machines at the same cradle-monted housing. It can be used for testing: No load characteristic test of external excitation generator. Load characteristic test of external excitation generator. External characteristic test of external excitation generator. Set characteristic test of external excitation generator. No load characteristic test of shunt excitation generator. Load characteristic test of shunt excitation generator. External characteristic test of shunt excitation generator. Set characteristic test of shunt excitation generator. External characteristic test of compund excitation generator. Load characteristic test of shunt excitation motor. External characteristic test of shunt excitation motor. Set characteristic test of shunt excitation motor. External-moment characteristic test of series excitation generator External characteristic test of compund excitation motor.

Synchonous Machines Experiment Set The Synchronous machine is with three phase stator armature winding for operation either as an alternator or as a synchronous motor.

4 Synchonous Machines Experiment Set The Synchronous machine is with three phase stator armature winding for operation either as an alternator or as a synchronous motor. It is suitable for working as motor and alternator. All of connections socket are on the motor connection box. It has a suitable frame for coupling the other machines at the same cradle-monted housing. It can be used for testing: No load characteristic test of generator. External characteristic test of generator. Set characteristic test of generator. Short circuit characteristic test of generator. Loaded saturation characteristic test of generator. Regulation characteristic with impedance method. Regulation characteristic with potier triangle method. Parellel of a synchnous machines. Methods of the working of synchronous motors. Diagram of the V curve of a synchronous motor. Power factor correcting with synchronous motor. Calculation test of alternators.

Transformers Experiment Set All of connections socket are on the motor connection box. It can be used for testing: Measurement of the winding resistance Measurement of the transformation ratio.

Measurement of the phase differantial primary and secondary winding test. Control Techniques Experiment Set Electrical machines trainnig set is suitable for control techniques with these equipments.

5 Transformers Experiment Set All of connections socket are on the motor connection box. It can be used for testing: Measurement of the winding resistance Measurement of the transformation ratio. No load test of transformers Short circuit test of transformers Polarity test of transformers Load test of transformers Calculation test of transformers. Measurement of the phase differantial primary and secondary winding test. Control Techniques Experiment Set Electrical machines trainnig set is suitable for control techniques with these equipments. Control techniques set is suitable for working with programable logic controller ( PLC ). Control techniques can be used for testing : Interreption working Control with starter switch Control with buton Buton locked control Elektrical locked control Starting with resistans and reaktans. Starting star-delta Starting slip-ring motor(optional) Starting capacitor motor Starting shunt motor. Dynamics brake

ES09-01 Power Bench: General Material Pockets The power bench is provided with a 30 mv-25 A 4-pole leakage current circuit breaker, phase indicator lamps, an emergency stop button and two

(es09-11) The fixed power supplies have independent outputs. The set provides also 3*380 V + N AC fixed output that is protected with 3*380 V + N 10 A delayed fuse and phase indicator lamps.

6 ES09-01 Power Bench: General Material Pockets The power bench is provided with a 30 mv-25 A 4-pole leakage current circuit breaker, phase indicator lamps, an emergency stop button and two single-phase, one three-phase covered sockets.(es09-10) There are two V + 10 A DC adjustable power supplies with ammeter, voltmeter and separate fuses on the bench.(es09-11) The fixed power supplies have independent outputs. The set provides also 3*380 V + N AC fixed output that is protected with 3*380 V + N 10 A delayed fuse and phase indicator lamps.(es09-20) There are three 16 A 500 V AC, 220 V 50 Hz Contactor Module (ES09-22) The inputs and outputs are designed for use with 2.5 mm 2 shock protective, flexible cables having caps. ES09-01 Work Bench: The work bench is made from laminated material and has the dimensions 1760*800*750mm and provides the facility of placing skid-rail on it for working The pads with scratch resistant oven paint finish are constructed to withstand the weight on the bench. ES09-02 Coupling Skid (1 Set): Provides easy access for the machines in the set to be mounted and dismounted. It facilitates the coupling of all the machine in the set to be mounted at the same axial level in match. Built in the dimensions 1000*300*50 mm and capable of absorbing the vibrations from the roll of the motors.

7 ES09-03 Aluminum Frame (1 Set): It is a frame where the measuring meters are mounted and dismaounted. It provides good compatibility with the set for a comfortable work. Dimensions:170x360 ES09-04 Connection Cables (3 colors - 4 lengths - 36 pieces): Flexible and shock protective spring type cables having 2,5 mm 2 cross-section and 25 A current capacity are supplied in adequate variety, length and number for performing the tests. Technical specifications of the motors ES ~ Asynchronous Motor Squirrel Cage (1 piece) Rating 1,5 Kw. 380 / 220 V three phase with 4 poles Provides the facility of fixing to a skid-rail attachment that can be mounted to the bench and for coupling with the other electrical machines on the same rail. Conforms the standards on safety classification, cooling and operating regime. ES ~ Asynchronous Motor (Permanent Circuit Capacitor) (1piece) Power rating: 1,5 Kw. 220 V single phase with 4 poles Provides the facility of fixing to a skid-rail attachment that can be mounted to the bench and for coupling with the other electrical machines on the same rail. Conforms the standards on safety classification, cooling and operating regime ES09-52 Synchronized motor and alternating current generator group (1 piece) Rated 1Hp (750 VA), operating voltage: 380 V 3 phase Excitation voltage is within the range VDC, power factor:1 and rotational speed: 1500 rpm Can be used as motor or generator

8 Provides the facility of fixing to a skid-rail attachment that can be mounted to the bench and for coupling with the other electrical machines on the same rail. Conforms the standards on safety classification, cooling and operating regime. ES09-53 DC Motor and Generator Group (2piece) Rating 1,5 Kw, 2 HP, 200 V 1500 rpm. Shunt, excitation and wound windings are separately confined in the terminal box. Can be used as motor or generator Provides the facility of fixing to a skid-rail attachment that can be mounted to the bench and for coupling with the other electrical machines on the same rail. Conforms the standards on safety classification, cooling and operating regime. ES09-54/55/56 Transformer Group (1 piece) Rated power:1,5-2 kva, and operatting voltage: 380 V. The ratio of the number of turns in the high voltage winding to that of the low voltage winding is about 2. Provided polarity makes it convenient for tests on transformation ratio. All transformers are suitable for us on the bench. Conforms the standards on safety classification, cooling and operating regime ES ~ TRANSFORMER 1,5 KVA PRIMARY:220/380 V SECONDARY:2x110 V,f=50-60Hz ES ~ TRANSFORMER 2 KVA PRIMARY:3x220 V (L-N) SEKONDER:3(2X63) V (L-N) ES ~TRANSFORMATÖR 2 KVA PRİMER 3x(2x110) V(L-N) SECONDARY:3x(2x40) V (L-N)

9 ES Phase Asynchronous Machine with Rings (1 pc) Rated 1 Hp (1 kw), operating voltage: 380 V 3 phase with 4 poles and rotational speed of 1500 rpm. Can be used as motor or generator Provides the facility of fixing to a skid-rail attachment that can be mounted to the bench and for coupling with the other electrical machines on the same rail. Conforms the standards on safety classification, cooling and operating regime. ES09-62 Starter resistances for 3-Phase Asynchronous Machines (1 piece) 3-step fan Provides smooth start to the asynchronous motor ES09-58 Fucoult Brake (1 piece): Operational rating is 48 V DC, 3 A, and has a construction enabling to load the spindle of the machine up to 1,25 fold of the nominal load current. Its spindle elevation and the coupling mode match for coupling on the same skid-rail with the other machines in the set. The technical specifications of the Measuring Instruments and the Modules: ES09-10 Power Supply Modules(1 piece): It has 30mA-25A 4 pole circuit-breakers and is provided with emergency mushroom head pushbutton.. It has two pieces monophase,one piece threephase coversocket. Modules are suitable for 3*380V +N AC fixed outputs voltage. Inputs and outputs socket is adaptable 2,5 mm 2 connecting leads with 4 mm safety ES09-11 Variable DC Powersupply Module(2 piece) Ammeter fuse socket for outputs on the supply modules. Voltmeter fuse socket for outputs on the supply modules. It has two V+10 A DC variable powersupply Inputs and outputs socket is adaptable 2,5 mm 2 connecting leads with 4 mm safety

10 ES09-12 Adjustable AC Source / Box Variac (1 piece): Adjustable 3-phase minimum 3 x 2,5 KVA, adjustable 3-phase V AC, 10 A output. The power supply is powered from the source of 3-phase 380 V AC on the power bench. 10-A V-automaton type fuse at the output of the power supply. The power supply is equipped with an electronic network analyzer and has a measuring instrument commutator. Allows simultaneous readings of RST voltages, currents, frequencies and power factor. There are three 60/5 current transformers on it for the measuring instruments. The power supply is placed in a locked housing with handles and wheels for easy transports. ES Phase Fuse Module (1 piece): Automatic fuse of 10 A 400 V with N automaton switch ES09-21 Thermomagnetic Switch Module (1 piece): 500 V AC A ES09-22 Contactor Module (3 piece): 16 A 500 V AC, operating voltage: 220 V 50 Hz

11 ES Polarized Switch Module (3 piece): 16 A 250 V AC ES Polarized Switch Module (5 piece): 16 A,380 V AC ES double-interruption Switch Module (1 piece): 32 A 500 V AC ES Star-Delta double-interruption Switch Module (1 piece): 32 A 500 V AC ES Starter double-interruption Switch Module (1 piece): 32 A 500 V AC

12 ES09-28 Time Relay Module (2 Piece) Time delay relay on pull in 0-60 sn Panel Type Time delay relay on drop-out 0-60 sn Panel Type ES09-29 Jog Button Module (1 piece): Push Button Pannel Type ES09-30 Start/Stop Button Module (4 piece): Push Button Pannel Type ES09-39 Double-Dial Voltmeter Module: (1 piece) Ranging 2*0-500 V AC. Analogue with double dial dimensions of heigth 297 mm The module is 96 x 96 mm and is fixed on a ES09-40 AC Voltmeter(3 Piece) It is digital and suitable for measuring VAC voltage. The module is 96 x 96 mm and is fixed on a Operating voltage is 220VAC, frequency 50 Hz and has an on/off switch.

13 Inputs and outputs socket is adaptable 2,5 mm 2 connecting leads with 4 mm safety ES09-41 DC Voltmeter(3 Piece) It is digital and suitable for measuring VDC voltage. The module is 96 x 96 mm and is fixed on a Operating voltage is 220VAC, frequency 50 Hz and has an on/off switch. Inputs and outputs socket is adaptable 2,5 mm 2 connecting leads with 4 mm safety ES09-42 DC Ammeter(3 Piece) It is digital and suitable for direct measuring 0-10 A DC current. The module is 96 x 96 mm and is fixed on a Operating voltage is 220VAC, frequency 50 Hz and has an on/off switch. Inputs and outputs socket are adaptable 2,5 mm 2 connecting leads with 4 mm safety ES09-43 AC Ammeter(3 Piece) It is digital and suitable for direct measuring 0-30 A AC current. Operating voltage is 220VAC, frequency 50 Hz and has an on/off switch. The module is 96 x 96 mm and is fixed on a Inputs and outputs socket are adaptable 2,5 mm 2 connecting leads with 4 mm safety ES09-44 Three phase Wattmeter (3 Piece) It is digital and suitable for direct measuring VAC and it has an aron connection. Operating voltage is 220VAC, frequency 50 Hz and has an on/off switch. dimensions of heigth 297 mm The module is 96 x 96 mm and is fixed on a Inputs and outputs socket are adaptable 2,5 mm 2 connecting leads with 4 mm safety

14 ES09-45 Monophase Wattmeter (1 piece) It is digital and suitable for direct measuring VAC Operating voltage is 220VAC, frequency 50 Hz and has an on/off switch. dimensions of heigth 297 mm The module is 96 x 96 mm and is fixed on a Inputs and outputs socket are adaptable 2,5 mm 2 connecting leads with 4 mm safety ES09-46 Cosfimeter Module: (2 piece) Digital 0-5 A AC,220 V AC. Load sensitive. 220 V supply voltage with separeted feed circuit dimensions of heigth 297 mm ES09-47 Douple frequency meter(1 piece) Ranging Hz. Analogue with double dials. dimensions of heigth 297 mm The module is 96 x 96 mm and is fixed on a ES09-48 Lamp Group (for synchronization test) (1 piece): Lamb group 3x(2x220V) dimensions of heigth 297 mm ES09-49 Synchronoscope Module (1 piece): 380V AC The module is 96 x 96 mm and is fixed on a

15 ES09-60 Optical and contact type tachometer(1 piece) It is suitable for measuring the revolving speed with digital readout. Measuring range is 0 to rpm. Power supply 4*1,5 V batteries inclued. ES09-61 AC Starter Module (1 piece): Digital 220 V input, 3x220 V output voltages, 1.5 Kw/2 P 7 A output current dimensions of heigth 297 mm ES09-63 Excitation Rheostat (2 piece): 250 ohm 500 W 220 V sliding rheostat (provided at required rating) 100 ohm 250 W 220 V sliding rheostat (provided at required rating) Loads Modules Technic Spects: ES09-64 Three Phase Variable Resistive loads: (1 Piece) It is single or three phase resistive step variable load. Maximum power is 5*100 VAR Inputs and outputs socket are adaptable 2,5 mm 2 connecting leads with 4 mm safety ES09-65 Three Phase Variable Capacitive loads: (1 Piece) It is single or three phase capacitive step variable load. Maximum power is 5*100 VAR Inputs and outputs socket are adaptable 2,5 mm 2 connecting leads with 4 mm safety ES09-66 Three PhaseVariable Inductive loads: (1 Piece) It is be single or three phase induktive step variable load. Maximum power 5*100 VAR Inputs and outputs socket adaptable 2,5 mm 2 connecting leads with 4 mm safety

16 COMPUTER-AID MODULE PC Interface and software Cokesen Electric Machinery Training Set is so designed that it can be computer aided. Computer-Aid Module builds the connection and communication between electric machines and the computer. The module consists of measuring and control interfaces. By this module, electromechanical measurements (current, voltage, rotor speed, and etc.) are taken via the computer and are easily stored. In addition, data regarding electric machines are visualized in a convenient format on the computer screen. More importantly, the data are processed fast and with minimum error by the computer. Computer-Aid Module provides the capability of fast data reading, data visualization, and data processing. In this way, a user can analyze electric machines easily and design various training scenarios.

ELECTRIC MACHINES EUROLAB 0.3 kw

ELECTRIC MACHINES EUROLAB 0.3 kw index SINGLE-PHASE MOTORS SPLIT-PHASE MOTOR DL 30130 CAPACITOR MOTOR DL 30140 UNIVERSAL MOTOR DL 30150 REPULSION MOTOR DL 30170 THREE PHASE ASYNCHRONOUS MOTORS SQUIRREL CAGE THREE PHASE ASYNCHRONOUS MOTOR