ECET 211 Electric Machines & Controls Lecture 5-1 Electric Motors. Lecture 5-1 Electric Motors

Size: px
Start display at page:

Download "ECET 211 Electric Machines & Controls Lecture 5-1 Electric Motors. Lecture 5-1 Electric Motors"

Transcription

1 ECET 211 Electric Machines & Controls Lecture 5-1 Electric Motors (2 of 4) Text Book: Chapter 5 Electric Motors, Electric Motors and Control Systems, by Frank D. Petruzella, published by McGraw Hill, Paul I-Hai Lin, Professor of Electrical and Computer Engr. Tech P.E. States of Indiana & California Dept. of Computer, Electrical and Information Technology Purdue University Fort Wayne Campus Prof. Paul Lin 1 Lecture 5-1 Electric Motors Chapter 5. Electric Motors Part 1. Motor Principles Part 2. Direct Current Motors Part 3. Three-Phase Alternating Current Motors Part 4. Single-Phase Alternating Current Motors Part 5. Alternating Current Motor Drives Part 6. Motor Selection Part 7. Motor Installation Part 8. Motor Maintenance and Troubleshooting Prof. Paul Lin 2 1

2 Part 3 Three-Phase AC Motors Rotating Magnetic Field Induction Motor Wound-Rotor Induction Motor Three-Phase Synchronous Motor Prof. Paul Lin 3 Youtube videos Part 3 Three-Phase AC Motors Baldor Athens, Georgia Plant (AC Induction Motor small HP, higher volume ), 11:59 minutes, video, Bt7RjY Baldor King Mountain, North Carolina Plant (Large AC Motors: Hp), 12: 17 min, video, Baldor Columbus, Mississippi Plant (Steel Band & Cast Iron Frame, AC Motors, Fixed & Adjustable Speed NEMA 250T-360T Frames), 10:23 minutes, Video, Baldor Gainesville, Georgia Plant, (Adjustable Speed AC & DC Motors, Navy, Nuclear and Mine Motors), 11:54 min video, Baldor Fort Smith, Arkansas Motor Plant (Rotor), 6:57 minutes, TES Generators and Motors Production of Electric Machines, 10:55 minutes, video, Prof. Paul Lin 4 2

3 Part 3. Three-Phase AC Motors Rotating Magnetic Field Stator s magnetic field is made to rotate electrically around and around in a circle Rotor s magnetic field is to made to follow the rotation of the stator s field pattern by being attracted and repelled by the stator field Figure 5-34 Rotating magnetic field Prof. Paul Lin 5 Part 3. Three-Phase AC Motors Rotating Magnetic Field Synchronous speed The synchronous speed, Ns, of an AC motor is the speed of the stator s magnetic field rotation. Ns = 120*f/P Ns rmp; f Hz, P = # of pole wound in each of the single-phase windings Actual rotor peed This is the speed at which the shaft rotates. It is the motor s nameplate speed. Example 5-3: Determine the synch. Speed of a 4-pole AC motor connected to a 60 Hz electrical supply. Figure 5-35 Rotating magnetic field Prof. Paul Lin 6 3

4 Part 3. Three-Phase AC Motors Rotating Magnetic Field Slip The rotor does not revolve at synchronous speed, but tends to slip behind. The slip is required for the induction motor to run. No slip => no relative motion => no induced voltage The rotor induced voltage has a frequency of f r = s*f Percentage slip = (Ns Nr)/Nr x 100 Example 5-4: Determine the slip of an induction motor having a synchronous speed of 1,800 rpm and rated actual speed of 1750 rpm. (Answer: 2.78%) Prof. Paul Lin 7 Part 3. Three-Phase AC Motors Induction Motor Rotor Induced Current No external voltage is applied to its rotor The AC current in the stator induces a voltage across an airgap and into the rotor winding to produce rotor current and associated magnetic field. Figure 5-36 Induced rotor current Prof. Paul Lin 8 4

5 Part 3. Three-Phase AC Motors Induction Motor Stator Coil Groupings - Phases A three-phase motor stator windings consists of three separate groups of coils, called phases, and designated A, B, and C. The phases are displaces from each other by 120 electrical degrees, and contain the same number of coils, connected for the same number of poles. Figure 5-37 Stator coils for a Y- connected four-pole 3Φ induction motor Prof. Paul Lin 9 Part 3. Three-Phase AC Motors Squirrel-Case Induction Motor Figure 5-38 Squirrel-case induction motor Rotor Constructed using a number of single bar short-circuited by end rings and arranged in hamster-wheel or squirrel-cage configuration. Induced rotor current establish their own magnetic field, which interacts with the stator magnetic field to produce a torque. The resultant production of torque spins the rotor in the same direction as the rotation of the magnetic field produced by the stator Prof. Paul Lin 10 5

6 Part 3. Three-Phase AC Motors Squirrel-Case Induction Motor Rotor Resistance and the Starting Torque The resistance of the squirrel-cage rotor has an important effect on the operation of the motor. High resistance rotor => develops a high starting torque at low starting current Low resistance rotor => develops low slip and high efficiency at full load NEMA-Type Squirrel-case Induction Motors Figure 5-39 Typical squirrel-case motor speed curve Prof. Paul Lin 11 Part 3. Three-Phase AC Motors Squirrel-Case Induction Motor - NEMA-Type Squirrel-case Induction Motors Figure 5-39 Typical squirrel-case motor speed curve NEMA Design B: Standard type normal starting torque, low starting current, and low slip at full load. For fans and blowers applications that required normal starting torque NEMA Design C: Higher than standard resistance => improves the rotor power factor at start, providing more starting torque For pump and other applications that requires a high starting torque NEMA Design D: Rotor resistance higher than Design C => produce maximum starting torque Applications: Cranes, hoists Prof. Paul Lin 12 6

7 Part 3. Three-Phase AC Motors Squirrel-Case Induction Motor Figure 5-39 Power Circuit for Reversing a Three-Phase IM Forward Running F Forward magnetic contactor L 1 T1, L2 T2, L3 T3 Reverse Running R Reverse magnetic contactor L 1 T3, L2 T2, L3 T1 Prof. Paul Lin 13 Part 3. Three-Phase AC Motors Squirrel-Case Induction Motor Figure 5-41 Motor power factor (PF): ranged from 70% to 90% Using wattmeter, ammeter, and a voltmeter P = 3 V L *I L * cosθ = * V L *I L *PF Prof. Paul Lin 14 7

8 Part 3. Three-Phase AC Motors Squirrel-Case Induction Motor Power Quality Lock-rotor current (starting current) Motor draws a high inrush current Up to 6 times of their nameplate full-load current Can create voltage sags or dips in the power lines, which may cause light flickers and problems with other operating equipment. Prof. Paul Lin 15 Part 3. Three-Phase AC Motors Squirrel-Case Induction Motor Figure 5-43 Dual-speed, three-phase squirrel-case single-winding motor Prof. Paul Lin 16 8

9 Part 3. Three-Phase AC Motors Squirrel-Case Induction Motor Figure 5-44 Typical connections for dual-voltage wye and delta series and parallel Prof. Paul Lin 17 Part 4. Single-Phase AC Motors For home and business appliances operate on single-phase AC power. Larger in size, for the same horsepower, than a three-phase motor Produced torque: pulsating, and irregular Lower power factor and lower efficiency Motor sizes from fractional (1/8, 1/4,1/3, 1/2, 3/4 hp) to 10 hp range The three basic types Split-phase Split-phase capacitor Shade-pole Prof. Paul Lin 18 9

10 Part 4. Single-Phase AC Motors Split-Phase Motor Figure 5-49 Split-phase induction motor Run (main) winding Starting winding Starting winding is displaced in the stator 90 electrical degrees from the running winding Centrifugal switch open to disconnect the starting winding when the motor speed reaches about 75% of full-load speed Prof. Paul Lin 19 Part 4. Single-Phase AC Motors Split-Phase Motor Figure 5-50 Rotating magnetic field of a split-phase motor Run (main) winding Starting winding Prof. Paul Lin 20 10

11 Part 4. Single-Phase AC Motors Split-Phase Capacitor Motor Figure 5-52 Dual-voltage splitphase motor connections (NEMA standard) Low voltage operation: Two run windings and start windings => all connected in parallel High voltage operation: Two run windings connect in series Start winding connect in parallel with one of the run windings Prof. Paul Lin 21 Part 4. Single-Phase AC Motors Split-Phase Capacitor-Start Motor Figure 5-53 Capacitor start motor A modified split-phase motor A capacitor connected in series with the starting winding crates a phase shift of approximately 80 degrees between the starting and running winding. It provides more than double the starting torque with 1/3 less starting current than the split-phase motor. Capacitor short circuit? => Start winding always connected, draw excessive current Capacitor open circuit?=> Motor cannot start Prof. Paul Lin 22 11

12 Part 4. Single-Phase AC Motors Split-Phase Capacitor-Start Motor Figure 5-54 Two-speed capacitor start motor Double speed (pole change) Low speed (8 pole): 900 rpm High speed (6 pole): 1200 rpm Prof. Paul Lin 23 Part 4. Single-Phase AC Motors Split-Phase Permanent Capacitor Motor Figure 5-55 Reversible permanent-capacitor motor connection Has a run-type capacitor permanently connected in series with the start winding. Low starting torque, not suited for hard-to-start applications Applications: Fans, blowers with low starting torque Intermittent cycling uses such adjusting mechanisms, gate operators, garage door openers that needs instant Prof. Paul Lin 24 reversing 12

13 Part 4. Single-Phase AC Motors Capacitor-Start/Capacitor-Run Motor Figure 5-56 Capacitor-start/capacitorrun motor During starting time: Start capacitor (electrolytic type) and Run capacitor (oil type) connected in parallel During run time: Start capacitor is disconnected Applications (starting hard loads): woodworking. Machinery, air compressors, high-pressure water pumps, vacuum pumps, other high torque applications Available in sizes from 1/2 to 25 hp. Prof. Paul Lin 25 Part 4. Single-Phase AC Motors Shaded-Pole Motor Figure 5-57 Shaded-pole motor (1/20 to 1/6 hp) Only one main winding, and no start winding or switch. Rotor squirrel cage Starting uses a continuous copper loop around a small portion of each motor pole Currents in the copper loop delay the phase of magnetic flux in that part of the pole enough to provide a rotating field. Typical applications: fan, can openers, blowers, and electric razors. Prof. Paul Lin 26 13

14 Part 4. Single-Phase AC Motors Universal Motor Figure 5-58 Universal motor Constructed as a series-type DC motor with a wound series field (on stator), and a wound armature (on the rotor) Can be operated with either DC or AC Figure 5-59 Motor speed and direction controls - drill Prof. Paul Lin 27 lin@ipfw.edu Summary & Conclusion Questions? Contact Prof. Lin through: Prof. Paul Lin 28 14

ECET 211 Electric Machines & Controls Lecture 2-2 (Part 2 of 3) Symbols and Drawing for Electric Motor Control Systems

ECET 211 Electric Machines & Controls Lecture 2-2 (Part 2 of 3) Symbols and Drawing for Electric Motor Control Systems ECET 211 Electric Machines & Controls Lecture 2-2 (Part 2 of 3) Symbols and Drawing for Electric Motor Control Systems Text Book: Chapter 2. Understanding Electrical Drawings, Electric Motors and Control

More information

ECET 211 Electric Machines & Controls Lecture 5-1 Electric Motors. Lecture 5-1 Electric Motors

ECET 211 Electric Machines & Controls Lecture 5-1 Electric Motors. Lecture 5-1 Electric Motors ECET 211 Electric Machines & Controls Lecture 5-1 Electric Motors (1 of 4) Text Book: Chapter 5 Electric Motors, Electric Motors and Control Systems, by Frank D. Petruzella, published by McGraw Hill, 2015.

More information

ECET 211 Electric Machines & Controls Lecture 2-3 (Part 3 of 3) Symbols and Drawing for Electric Motor Control Systems

ECET 211 Electric Machines & Controls Lecture 2-3 (Part 3 of 3) Symbols and Drawing for Electric Motor Control Systems ECET 211 Electric Machines & Controls Lecture 2-3 (Part 3 of 3) Symbols and Drawing for Electric Motor Control Systems Text Book: Chapter 2. Understanding Electrical Drawings, Electric Motors and Control

More information

Most home and business appliances operate on single-phase AC power. For this reason, singlephase AC motors are in widespread use.

Most home and business appliances operate on single-phase AC power. For this reason, singlephase AC motors are in widespread use. Chapter 5 Most home and business appliances operate on single-phase AC power. For this reason, singlephase AC motors are in widespread use. A single-phase induction motor is larger in size, for the same

More information

ECET 211 Electric Machines & Controls Lecture 8 Motor Control Circuits (2 of 2) Lecture 8 Motor Control Circuits

ECET 211 Electric Machines & Controls Lecture 8 Motor Control Circuits (2 of 2) Lecture 8 Motor Control Circuits ECET 211 Electric Machines & Controls Lecture 8 Motor Control Circuits (2 of 2) Text Book: Electric Motors and Control Systems, by Frank D. Petruzella, published by McGraw Hill, 2015. Paul I-Hai Lin, Professor

More information

ECET 211 Electric Machines & Controls Lecture 6 Contactors and Motor Starters (2 of 2) Lecture 6 Contactors and Motor Starters

ECET 211 Electric Machines & Controls Lecture 6 Contactors and Motor Starters (2 of 2) Lecture 6 Contactors and Motor Starters ECET 211 Electric Machines & Controls Lecture 6 Contactors and Motor Starters (2 of 2) Text Book: Chapter 6, Electric Motors and Control Systems, by Frank D. Petruzella, published by McGraw Hill, 2015.

More information

ECET 211 Electric Machines & Controls Lecture 5-4 Electric Motors. Lecture 5-4 Electric Motors

ECET 211 Electric Machines & Controls Lecture 5-4 Electric Motors. Lecture 5-4 Electric Motors ECET 211 Electric Machines & Controls Lecture 5-4 Electric Motors (4 of 4) Text Book: Chapter 5 Electric Motors, Electric Motors and Control Systems, by Frank D. Petruzella, published by McGraw Hill, 2015.

More information

ECET 211 Electric Machines & Controls Lecture 8 Motor Control Circuits (1 of 2) Lecture 8 Motor Control Circuits

ECET 211 Electric Machines & Controls Lecture 8 Motor Control Circuits (1 of 2) Lecture 8 Motor Control Circuits ECET 211 Electric Machines & Controls Lecture 8 Motor Control Circuits (1 of 2) Text Book: Electric Motors and Control Systems, by Frank D. Petruzella, published by McGraw Hill, 2015. Paul I-Hai Lin, Professor

More information

ECET 211 Electric Machines & Controls Lecture 3-1 (Part 1 of 2) Motors, Transformers and Distribution Systems

ECET 211 Electric Machines & Controls Lecture 3-1 (Part 1 of 2) Motors, Transformers and Distribution Systems ECET 211 Electric Machines & Controls Lecture 3-1 (Part 1 of 2) Motors, Transformers and Distribution Systems Text Book: Electric Motors and Control Systems, by Frank D. Petruzella, published by McGraw

More information

ECET 211 Electric Machines & Controls Lecture 6 Contactors and Motor Starters. Lecture 6 Contactors and Motor Starters

ECET 211 Electric Machines & Controls Lecture 6 Contactors and Motor Starters. Lecture 6 Contactors and Motor Starters ECET 211 Electric Machines & Controls Lecture 6 Contactors and Motor Starters Text Book: Chapter 6, Electric Motors and Control Systems, by Frank D. Petruzella, published by McGraw Hill, 2015. Paul I-Hai

More information

ROTATING MAGNETIC FIELD

ROTATING MAGNETIC FIELD Chapter 5 ROTATING MAGNETIC FIELD 1 A rotating magnetic field is the key to the operation of AC motors. The magnetic field of the stator is made to rotate electrically around and around in a circle. Stator

More information

Unit 34 Single-Phase Motors

Unit 34 Single-Phase Motors Unit 34 Single-Phase Motors Objectives: Unit 34 Single-Phase Motors List the different types of split-phase motors. Discuss the operation of split-phase motors. Reverse the direction of rotation of a splitphase

More information

ECET 211 Electric Machines & Controls Lecture 1-3 (Part 2) Electrical Safety in the Workplace Electrical Safety in the Workplace

ECET 211 Electric Machines & Controls Lecture 1-3 (Part 2) Electrical Safety in the Workplace Electrical Safety in the Workplace ECET 211 Electric Machines & Controls Lecture 1-3 (Part 2) Electrical Safety in the Workplace Text Book: Electric Motors and Control Systems, by Frank D. Petruzella, published by McGraw Hill, 2015. Other

More information

The Wound-Rotor Induction Motor Part I

The Wound-Rotor Induction Motor Part I Experiment 1 The Wound-Rotor Induction Motor Part I OBJECTIVE To examine the construction of the three-phase wound-rotor induction motor. To understand exciting current, synchronous speed and slip in a

More information

ECET 211 Electric Machines & Controls Lecture 4-1 Motor Control Devices: Lecture 4 Motor Control Devices

ECET 211 Electric Machines & Controls Lecture 4-1 Motor Control Devices: Lecture 4 Motor Control Devices ECET 211 Electric Machines & Controls Lecture 4-1 Motor Control Devices: Part 1. Manually Operated Switch Part 2. Mechanically Operated Switch Text Book: Electric Motors and Control Systems, by Frank D.

More information

Single Phase Induction Motor. Dr. Sanjay Jain Department Of EE/EX

Single Phase Induction Motor. Dr. Sanjay Jain Department Of EE/EX Single Phase Induction Motor Dr. Sanjay Jain Department Of EE/EX Application :- The single-phase induction machine is the most frequently used motor for refrigerators, washing machines, clocks, drills,

More information

SECTION 4 ELECTRIC MOTORS UNIT 17: TYPES OF ELECTRIC MOTORS UNIT OBJECTIVES UNIT OBJECTIVES 3/21/2012

SECTION 4 ELECTRIC MOTORS UNIT 17: TYPES OF ELECTRIC MOTORS UNIT OBJECTIVES UNIT OBJECTIVES 3/21/2012 SECTION 4 ELECTRIC MOTORS UNIT 17: TYPES OF ELECTRIC MOTORS UNIT OBJECTIVES After studying this unit, the reader should be able to Describe the different types of open single-phase motors used to drive

More information

Motor Basics AGSM 325 Motors vs Engines

Motor Basics AGSM 325 Motors vs Engines Motor Basics AGSM 325 Motors vs Engines Motors convert electrical energy to mechanical energy. Engines convert chemical energy to mechanical energy. 1 Motors Advantages Low Initial Cost - $/Hp Simple &

More information

Single Phase Induction Motors

Single Phase Induction Motors Single Phase Induction Motors Prof. T. H. Panchal Asst. Professor Department of Electrical Engineering Institute of Technology Nirma University, Ahmedabad Introduction As the name suggests, these motors

More information

9/7/2010. Chapter , The McGraw-Hill Companies, Inc. MOTOR CLASSIFICATION. 2010, The McGraw-Hill Companies, Inc.

9/7/2010. Chapter , The McGraw-Hill Companies, Inc. MOTOR CLASSIFICATION. 2010, The McGraw-Hill Companies, Inc. Chapter 2 MOTOR CLASSIFICATION 1 In general, motors are classified according to the type of power used (AC or DC) and the motor's principle of operation. AC DC Motor Family Tree 2 DC MOTOR CONNECTIONS

More information

AC MOTOR TYPES. DESCRIBE how torque is produced in a single-phase AC motor. EXPLAIN why an AC synchronous motor does not have starting torque.

AC MOTOR TYPES. DESCRIBE how torque is produced in a single-phase AC motor. EXPLAIN why an AC synchronous motor does not have starting torque. Various types of AC motors are used for specific applications. By matching the type of motor to the appropriate application, increased equipment performance can be obtained. EO 1.5 EO 1.6 EO 1.7 EO 1.8

More information

ECE 325 Electric Energy System Components 6 Three Phase Induction Motors. Instructor: Kai Sun Fall 2016

ECE 325 Electric Energy System Components 6 Three Phase Induction Motors. Instructor: Kai Sun Fall 2016 ECE 325 Electric Energy System Components 6 Three Phase Induction Motors Instructor: Kai Sun Fall 2016 1 Content (Materials are from Chapters 13-15) Components and basic principles Selection and application

More information

ECET 211 Electric Machines & Control Lecture 1-1 Electrical Power Generation, Transmission and Distribution

ECET 211 Electric Machines & Control Lecture 1-1 Electrical Power Generation, Transmission and Distribution ECET 211 Electric Machines & Control Lecture 1-1 Electrical Power Generation, Transmission and Distribution Paul I-Hai Lin, Professor of Electrical and Computer Engineering Technology P.E. States of Indiana

More information

ESO 210 Introduction to Electrical Engineering

ESO 210 Introduction to Electrical Engineering ESO 210 Introduction to Electrical Engineering Lectures-37 Polyphase (3-phase) Induction Motor 2 Determination of Induction Machine Parameters Three tests are needed to determine the parameters in an induction

More information

Pretest Module 21 Unit 4 Single-Phase Motors

Pretest Module 21 Unit 4 Single-Phase Motors Pretest Module 21 Unit 4 Single-Phase Motors 1. What are the four main components of a single-phase motor? Rotor, stator, centrifugal switch, end bells and bearings 2. How is a rotating field created in

More information

10. Starting Method for Induction Motors

10. Starting Method for Induction Motors 10. Starting Method for Induction Motors A 3-phase induction motor is theoretically self starting. The stator of an induction motor consists of 3-phase windings, which when connected to a 3-phase supply

More information

Single-Phase AC Induction Squirrel Cage Motors. Permanent Magnet Series Wound Shunt Wound Compound Wound Squirrel Cage. Induction.

Single-Phase AC Induction Squirrel Cage Motors. Permanent Magnet Series Wound Shunt Wound Compound Wound Squirrel Cage. Induction. FAN ENGINEERING Information and Recommendations for the Engineer Twin City Fan FE-1100 Single-Phase AC Induction Squirrel Cage Motors Introduction It is with the electric motor where a method of converting

More information

EXPERIMENT 2 THREE PHASE INDUCTION MOTOR, PART 1

EXPERIMENT 2 THREE PHASE INDUCTION MOTOR, PART 1 University f Jordan School of Engineering Department of Mechatronics Engineering Electrical Machines Lab Eng. Osama Fuad Eng. Nazmi Ashour EXPERIMENT 2 THREE PHASE INDUCTION MOTOR, PART 1 OBJECTIVES To

More information

EE6351 ELECTRIC DRIVES AND CONTROL UNIT-1 INTRODUTION

EE6351 ELECTRIC DRIVES AND CONTROL UNIT-1 INTRODUTION EE6351 ELECTRIC DRIVES AND CONTROL UNIT-1 INTRODUTION 1. What is meant by drive and electric drive? Machines employed for motion control are called drives and may employ any one of the prime movers for

More information

Starting of Induction Motors

Starting of Induction Motors 1- Star Delta Starter The method achieved low starting current by first connecting the stator winding in star configuration, and then after the motor reaches a certain speed, throw switch changes the winding

More information

2014 ELECTRICAL TECHNOLOGY

2014 ELECTRICAL TECHNOLOGY SET - 1 II B. Tech I Semester Regular Examinations, March 2014 ELECTRICAL TECHNOLOGY (Com. to ECE, EIE, BME) Time: 3 hours Max. Marks: 75 Answer any FIVE Questions All Questions carry Equal Marks ~~~~~~~~~~~~~~~~~~~~~~~~~~

More information

EEE3441 Electrical Machines Department of Electrical Engineering. Lecture. Introduction to Electrical Machines

EEE3441 Electrical Machines Department of Electrical Engineering. Lecture. Introduction to Electrical Machines Department of Electrical Engineering Lecture Introduction to Electrical Machines 1 In this Lecture Induction motors and synchronous machines are introduced Production of rotating magnetic field Three-phase

More information

14 Single- Phase A.C. Motors I

14 Single- Phase A.C. Motors I Lectures 14-15, Page 1 14 Single- Phase A.C. Motors I There exists a very large market for single-phase, fractional horsepower motors (up to about 1 kw) particularly for domestic use. Like many large volume

More information

Contents. Review of Electric Circuitd. Preface ;

Contents. Review of Electric Circuitd. Preface ; Preface ; Chapter 1 Review of Electric Circuitd 1.1 Introduction, 1 1.2 Direct Circuit Current, 1 1.2.1 Voltage, 3 1.2.2 Power, 3 1.2.3 Ohm's Law, 5 1.2.4 KirchhofTs Laws, 5 1.2.4.1 Kirchhoff s Current

More information

Institute of Technology, Nirma University B. Tech. Sem. V: Electrical Engineering 2EE305: ELECTRICAL MACHINES II. Handout: AC Commutator Motors

Institute of Technology, Nirma University B. Tech. Sem. V: Electrical Engineering 2EE305: ELECTRICAL MACHINES II. Handout: AC Commutator Motors Institute of Technology, Nirma University B. Tech. Sem. V: Electrical Engineering 2EE305: ELECTRICAL MACHINES II Handout: AC Commutator Motors Prepared by: Prof. T. H. Panchal Learning Objective: Introduction

More information

DEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1

DEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1 It is the mark of an educated mind to be able to entertain a thought without accepting it. DEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1 1. Explain the Basic concepts of rotating machine. 2. With help

More information

5. The force required to bring an object weighing 65 lb from rest to a speed of 50 fps in 10 sec is approximately

5. The force required to bring an object weighing 65 lb from rest to a speed of 50 fps in 10 sec is approximately Student ID: 53703105 Exam: 4341RR - Industrial Motor Applications When you have completed your exam and reviewed your answers, click Submit Exam. Answers will not be recorded until you hit Submit Exam.

More information

Leeson Single Phase Electric Motor characteristics and applications

Leeson Single Phase Electric Motor characteristics and applications 1 of 5 19/10/2006 5:49 PM Single-phase Electric Motors Characteristics & Applications by Kevin Heinecke, LEESON Electric Corporation Back to Web Merlin General Information Mechanical Electrical Metric

More information

Part- A Objective Questions (10X1=10 Marks)

Part- A Objective Questions (10X1=10 Marks) Dr. Mahalingam College of Engineering and Technology, Pollachi-3 (An Autonomous Institution) CCET 3(2016Regulation) Name of Programme: B.E. (EEE) Course Code&Course Title: 16EET41 & Synchronous & Induction

More information

Pretest Module 21 Units 1-4 AC Generators & Three-Phase Motors

Pretest Module 21 Units 1-4 AC Generators & Three-Phase Motors Pretest Module 21 Units 1-4 AC Generators & Three-Phase Motors 1. What are the two main parts of a three-phase motor? Stator and Rotor 2. Which part of a three-phase squirrel-cage induction motor is a

More information

Science 30 Unit C Electromagnetic Energy

Science 30 Unit C Electromagnetic Energy Science 30 Unit C Electromagnetic Energy Outcome 1: Students will explain field theory and analyze its applications in technologies used to produce, transmit and transform electrical energy. Specific Outcome

More information

Pretest Module 21 Units 1-3 AC Generators & Three-Phase Motors

Pretest Module 21 Units 1-3 AC Generators & Three-Phase Motors Pretest Module 21 Units 1-3 AC Generators & Three-Phase Motors 1. What are the two main parts of a three-phase 2. Which part of a three-phase squirrel-cage induction motor is a hollow core? 3. What are

More information

Stator rheostat, Autotransformer Star to Delta starter and rotor resistance starter.

Stator rheostat, Autotransformer Star to Delta starter and rotor resistance starter. UNIT-IV 1.What are the types of starters? Stator rheostat, Autotransformer Star to Delta starter and rotor resistance starter. 2. List out the methods of speed control of cage type 3-phase induction motor?

More information

Table of Contents Lesson One Lesson Two Lesson Three Lesson Four Lesson Five Lesson Six Lesson Seven Lesson Eight Lesson Nine Lesson Ten

Table of Contents Lesson One Lesson Two Lesson Three Lesson Four Lesson Five Lesson Six Lesson Seven Lesson Eight Lesson Nine Lesson Ten Table of Contents Lesson One Lesson Two Lesson Three Introduction to Single-Phase Motors...3 Split-Phase Motors...21 Capacitor Motors...37 Lesson Four Lesson Five Lesson Six Repulsion Motors...55 Universal

More information

Design, Engineering, and Manufacturing of Motors for Electric Vehicle Applications

Design, Engineering, and Manufacturing of Motors for Electric Vehicle Applications Design, Engineering, and Manufacturing of Motors for Electric Vehicle Applications Mark Steffka Email: msteffka@ieee.org FR-AM-5 History of Electric Drives in Transportation 2 Why Use Electric Drives?

More information

Chapter 2: AC Gearmotors and Motors

Chapter 2: AC Gearmotors and Motors Chapter : AC Gearmotors and Motors Although commutator and brush assemblies may be used in some types of alternating current (AC) gearmotors and motors (series/universal wound), brushless induction-type

More information

chapter6 Electrical machines and motors Unit 1 outcome 6

chapter6 Electrical machines and motors Unit 1 outcome 6 Electrical machines and motors chapter6 Unit 1 outcome 6 The principles of magnetism are central to many of the tasks you will carry out as an electrician. Magnetism, like gravity, is a fundamental force.

More information

DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING

DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK 16EET41 SYNCHRONOUS AND INDUCTION MACHINES UNIT I SYNCHRONOUS GENERATOR 1. Why the stator core is laminated? 2. Define voltage regulation

More information

Electrical Machines -II

Electrical Machines -II Objective Type Questions: 1. Basically induction machine was invented by (a) Thomas Alva Edison (b) Fleming (c) Nikola Tesla (d) Michel Faraday Electrical Machines -II 2. What will be the amplitude and

More information

(d) None of the above.

(d) None of the above. Dr. Mahalingam College of Engineering and Technology, Pollachi-3 (An Autonomous Institution affiliated to Anna niversity) CCET II (2016 Regulation) Name of Programme: B.E. (EEE) Course Code & Course Title:

More information

Date: Name: ID: LABORATORY EXPERIMENT NO. 8 INDUCTION MOTOR/GENERATOR 8-1

Date: Name: ID: LABORATORY EXPERIMENT NO. 8 INDUCTION MOTOR/GENERATOR 8-1 Date: Name: ID: LABORATORY EXPERIMENT NO. 8 INDUCTION MOTOR/GENERATOR 8-1 OBJECT 1. To determine the general performance of a squirrel motors 2. To observe the characteristics of induction generators.

More information

FLAT LINEAR INDUCTION PUMPS

FLAT LINEAR INDUCTION PUMPS Creative Engineers, Inc. PO Box 206 Phoenix MD 21131 www.creativeengineers.com Phone (443) 807-1202 Fax (410) 683-9707 info@creativeengineers.com FLAT LINEAR INDUCTION PUMPS www.creativeengineers.com Creative

More information

Fundamentals of Motors

Fundamentals of Motors Fundamentals of Motors 5/05 FOM Fundamentals of Motors Table of Contents Electrical and Magnetic Basics................................................................ 1-2 Fluid Flow versus Electron Flow.............................................................

More information

Chapter 3.2: Electric Motors

Chapter 3.2: Electric Motors Part I: Objective type questions and answers Chapter 3.2: Electric Motors 1. The synchronous speed of a motor with 6 poles and operating at 50 Hz frequency is. a) 1500 b) 1000 c) 3000 d) 750 2. The efficiency

More information

SECTION COMMON MOTOR REQUIREMENTS FOR HVAC EQUIPMENT

SECTION COMMON MOTOR REQUIREMENTS FOR HVAC EQUIPMENT SECTION 230513 - COMMON MOTOR REQUIREMENTS FOR HVAC EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES A. Single phase electric motors. B. Three phase electric motors. 1.2 REFERENCE STANDARDS A. ABMA STD 9

More information

INDUCTION MOTOR. There is no physical electrical connection to the secondary winding, its current is induced

INDUCTION MOTOR. There is no physical electrical connection to the secondary winding, its current is induced INDUCTION MOTOR INTRODUCTION An induction motor is an alternating current motor in which the primary winding on one member (usually the stator) is connected to the power source and a secondary winding

More information

Renewable Energy Systems 13

Renewable Energy Systems 13 Renewable Energy Systems 13 Buchla, Kissell, Floyd Chapter Outline Generators 13 Buchla, Kissell, Floyd 13-1 MAGNETISM AND ELECTROMAGNETISM 13-2 DC GENERATORS 13-3 AC SYNCHRONOUS GENERATORS 13-4 AC INDUCTION

More information

R07 SET - 1

R07 SET - 1 R07 SET - 1 II B. Tech II Semester Supplementary Examinations April/May 2013 ELECTRICAL MACHINES - II (Electrical and Electronics Engineering) Time: 3 hours Max. Marks: 80 Answer any FIVE Questions All

More information

Electrical Machines II. Week 5-6: Induction Motor Construction, theory of operation, rotating magnetic field and equivalent circuit

Electrical Machines II. Week 5-6: Induction Motor Construction, theory of operation, rotating magnetic field and equivalent circuit Electrical Machines II Week 5-6: Induction Motor Construction, theory of operation, rotating magnetic field and equivalent circuit Asynchronous (Induction) Motor: industrial construction Two types of induction

More information

Induction Motor Control

Induction Motor Control Induction Motor Control A much misunderstood yet vitally important facet of electrical engineering. The Induction Motor A very major consumer of electrical energy in industry today. The major source of

More information

Unit III-Three Phase Induction Motor:

Unit III-Three Phase Induction Motor: INTRODUCTION Unit III-Three Phase Induction Motor: The three phase induction motor runs on three phase AC supply. It is an ac motor. The power is transferred by means of induction. So it is also called

More information

Electrical Theory. Generator Theory. PJM State & Member Training Dept. PJM /22/2018

Electrical Theory. Generator Theory. PJM State & Member Training Dept. PJM /22/2018 Electrical Theory Generator Theory PJM State & Member Training Dept. PJM 2018 Objectives The student will be able to: Describe the process of electromagnetic induction Identify the major components of

More information

Regulation: R16 Course & Branch: B.Tech EEE

Regulation: R16 Course & Branch: B.Tech EEE SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (Descriptive) Subject with Code : Electrical Machines-II (16EE215) Regulation: R16 Course & Branch: B.Tech

More information

Lecture 20: Stator Control - Stator Voltage and Frequency Control

Lecture 20: Stator Control - Stator Voltage and Frequency Control Lecture 20: Stator Control - Stator Voltage and Frequency Control Speed Control from Stator Side 1. V / f control or frequency control - Whenever three phase supply is given to three phase induction motor

More information

APGENCO/APTRANSCO Assistant Engineer Electrical Previous Question Papers Q.1 The two windings of a transformer is conductively linked. inductively linked. not linked at all. electrically linked. Q.2 A

More information

Dev Bhoomi Institute Of Technology LABORATORY Department of Electrical And Electronics Engg. Electro-mechanical Energy Conversion II

Dev Bhoomi Institute Of Technology LABORATORY Department of Electrical And Electronics Engg. Electro-mechanical Energy Conversion II REV. NO. : REV. DATE : PAGE: 1 Electro-mechanical Energy Conversion II 1. To perform no load and blocked rotor tests on a three phase squirrel cage induction motor and determine equivalent circuit. 2.

More information

FRACTIONAL HORSEPOWER MOTORS & ACCESSORIES

FRACTIONAL HORSEPOWER MOTORS & ACCESSORIES TABLE OF CONTENTS Motor Information Guide Definitions And Abbreviations... page 2 Motor Identification Without A Nameplate What To Look For... page 3 Direct Drive Blower Motors: Two Speed... page 4 Three

More information

To discover the factors affecting the direction of rotation and speed of three-phase motors.

To discover the factors affecting the direction of rotation and speed of three-phase motors. EXPERIMENT 12 Direction of Rotation of Three-Phase Motor PURPOSE: To discover the factors affecting the direction of rotation and speed of three-phase motors. BRIEFING: The stators of three-phase motors

More information

Electric Machines I 2017 Shiraz University of Technology Dr. A. Rahideh

Electric Machines I 2017 Shiraz University of Technology Dr. A. Rahideh In The Name of God The Most Compassionate, The Most Merciful Electric Machines I Table of Contents 1. Introduction to Electric Machines 2. Electromagnetic Circuits 3. Principle of Electromechanical Energy

More information

ELECTRICAL MAINTENANCE

ELECTRICAL MAINTENANCE ELECTRICAL MAINTENANCE II PRACTICAL JOURNAL DATA 1 EXPERIMENT NO. 1 AIM: TO FIND VOLTAGE RATIO OF A GIVEN TRANSFORMER. CIRCUIT DIAGRAM: OBSERVATION TABLE: Sr.No. 1 2 3 4 Primary Voltage (V 1 ) Secondary

More information

ECET 211 Electric Machines & Controls Lecture 1-4 (Part 1) Electrical Safety in the Workplace Electrical Safety in the Workplace

ECET 211 Electric Machines & Controls Lecture 1-4 (Part 1) Electrical Safety in the Workplace Electrical Safety in the Workplace ECET 211 Electric Machines & Controls Lecture 1-4 (Part 1) Electrical Safety in the Workplace Text Book: Electric Motors and Control Systems, by Frank D. Petruzella, published by McGraw Hill, 2015. Other

More information

Introduction. Upon completion of AC Motors you should be able to: Explain the concepts of force, inertia, speed, and torque

Introduction. Upon completion of AC Motors you should be able to: Explain the concepts of force, inertia, speed, and torque Table of Contents Introduction...2 AC Motors...4 Force and Motion...6 Energy... 11 Electrical Energy... 13 AC Motor Construction... 17 Magnetism... 23 Electromagnetism... 25 Developing a Rotating Magnetic

More information

Electrical Machines, Drives, and Power Systems Theodore Wildi Sixth Edition

Electrical Machines, Drives, and Power Systems Theodore Wildi Sixth Edition Electrical Machines, Drives, and Power Systems Theodore Wildi Sixth Edition Pearson Education Limited Edinburgh Gate Harlow Essex CM20 2JE England and Associated Companies throughout the world Visit us

More information

PAC TRAINING PUMP MOTORS

PAC TRAINING PUMP MOTORS PAC TRAINING PUMP MOTORS 1 Basics Magnet supported from above N S N S Since unlike poles repel each other, the magnet will rotate Stationary Magnet 2 Basics N S Stationary Magnet 3 Basics N N S S Stationary

More information

Comprehensive Technical Training

Comprehensive Technical Training Comprehensive Technical Training For Sugar Mills Staff on Operation & Maintenance of Baggase Based HP Cogeneration System Schedule: 10 th July to 13 th July, 2017 A.C. GENERATOR Topics Covered. Introduction.

More information

ELECTRICAL MACHINES. Theory and Practice. M.N. Bandyopadhyay

ELECTRICAL MACHINES. Theory and Practice. M.N. Bandyopadhyay ELECTRICAL MACHINES Theory and Practice M.N. Bandyopadhyay ELECTRICAL MACHINES Theory and Practice M.N. Bandyopadhyay Director National Institute of Technology Kurukshetra Delhi-110092 2014 ELECTRICAL

More information

Special-Purpose Electric Machines

Special-Purpose Electric Machines Special-Purpose Electric Machines The machines introduced in this lecture are used in many applications requiring fractional horsepower, or the ability to accurately control position, velocity or torque.

More information

Understanding NEMA Motor Nameplates

Understanding NEMA Motor Nameplates Understanding NEMA Motor Nameplates Mission Statement is to be the best (as determined by our customers) marketers, designers and manufacturers of industrial electric motors, mechanical power transmission

More information

MAGNETIC EFFECTS OF ELECTRIC CURRENT

MAGNETIC EFFECTS OF ELECTRIC CURRENT MAGNETIC EFFECTS OF ELECTRIC CURRENT It is observed that when a compass is brought near a current carrying conductor the needle of compass gets deflected because of flow of electricity. This shows that

More information

Question 2: Around the bar magnet draw its magnetic fields. Answer:

Question 2: Around the bar magnet draw its magnetic fields. Answer: Chapter 13: Magnetic Effects of Electric Current Question 1: What is the reason behind the compass needle is deflected when it is brought close to the bar magnet? Compass needles work as a small bar magnet;

More information

PHY 152 (ELECTRICITY AND MAGNETISM)

PHY 152 (ELECTRICITY AND MAGNETISM) PHY 152 (ELECTRICITY AND MAGNETISM) ELECTRIC MOTORS (AC & DC) ELECTRIC GENERATORS (AC & DC) AIMS Students should be able to Describe the principle of magnetic induction as it applies to DC and AC generators.

More information

Electric Motor Controls BOMA Pre-Quiz

Electric Motor Controls BOMA Pre-Quiz Electric Motor Controls BOMA Pre-Quiz Name: 1. How does a U.P.S. (uninterruptable power supply) work? A. AC rectified to DC batteries then inverted to AC B. Batteries generate DC power C. Generator, batteries,

More information

Alternating Current Machines SAMPLE. Learner Workbook. Version 1. Training and Education Support Industry Skills Unit Meadowbank. Product Code: 5633

Alternating Current Machines SAMPLE. Learner Workbook. Version 1. Training and Education Support Industry Skills Unit Meadowbank. Product Code: 5633 Learner Workbook Version 1 Training and Education Support Industry Skills Unit Meadowbank Product Code: 5633 Contents Introduction... 5 Section 1: Operating Principles of Three-Phase Induction Motors.7

More information

Introduction: Electromagnetism:

Introduction: Electromagnetism: This model of both an AC and DC electric motor is easy to assemble and disassemble. The model can also be used to demonstrate both permanent and electromagnetic motors. Everything comes packed in its own

More information

Iowa State University Electrical and Computer Engineering. E E 452. Electric Machines and Power Electronic Drives

Iowa State University Electrical and Computer Engineering. E E 452. Electric Machines and Power Electronic Drives Electrical and Computer Engineering E E 452. Electric Machines and Power Electronic Drives Laboratory #12 Induction Machine Parameter Identification Summary The squirrel-cage induction machine equivalent

More information

SPH3U UNIVERSITY PHYSICS

SPH3U UNIVERSITY PHYSICS SPH3U UNIVERSITY PHYSICS ELECTRICITY & MAGNETISM L (P.599-604) The large-scale production of electrical energy that we have today is possible because of electromagnetic induction. The electric generator,

More information

VIII. Three-phase Induction Machines (Asynchronous Machines) Induction Machines

VIII. Three-phase Induction Machines (Asynchronous Machines) Induction Machines VIII. Three-phase Induction Machines (Asynchronous Machines) Induction Machines 1 Introduction Three-phase induction motors are the most common and frequently encountered machines in industry simple design,

More information

Unit 32 Three-Phase Alternators

Unit 32 Three-Phase Alternators Unit 32 Three-Phase Alternators Objectives: Discuss the operation of a three-phase alternator. Explain the effect of rotation speed on frequency. Explain the effect of field excitation on output voltage.

More information

R13 SET - 1. b) Describe different braking methods employed for electrical motors. [8M]

R13 SET - 1. b) Describe different braking methods employed for electrical motors. [8M] Code No:RT32026 R13 SET - 1 III B. Tech II Semester Regular Examinations, April - 2016 POWER SEMICONDUCTOR DRIVES (Electrical and Electronics Engineering) Time: 3 hours Maximum Marks: 70 Note: 1. Question

More information

DOWNLOAD OR READ : THE INDUCTION MACHINES DESIGN HANDBOOK SECOND EDITION ELECTRIC POWER ENGINEERING SERIES PDF EBOOK EPUB MOBI

DOWNLOAD OR READ : THE INDUCTION MACHINES DESIGN HANDBOOK SECOND EDITION ELECTRIC POWER ENGINEERING SERIES PDF EBOOK EPUB MOBI DOWNLOAD OR READ : THE INDUCTION MACHINES DESIGN HANDBOOK SECOND EDITION ELECTRIC POWER ENGINEERING SERIES PDF EBOOK EPUB MOBI Page 1 Page 2 the induction machines design pdf Download The Induction Machines

More information

Motor Protection Fundamentals. Motor Protection - Agenda

Motor Protection Fundamentals. Motor Protection - Agenda Motor Protection Fundamentals IEEE SF Power and Energy Society May 29, 2015 Ali Kazemi, PE Regional Technical Manager Schweitzer Engineering Laboratories Irvine, CA Copyright SEL 2015 Motor Protection

More information

Hybrid Motor Technology to Achieve Efficiency Levels Beyond NEMA Premium

Hybrid Motor Technology to Achieve Efficiency Levels Beyond NEMA Premium Hybrid Motor Technology to Achieve Efficiency Levels Beyond NEMA Premium Richard R. Schaefer, Baldor Electric Company ABSTRACT This paper will discuss the latest advances in AC motor design that combines

More information

UNIT 2. INTRODUCTION TO DC GENERATOR (Part 1) OBJECTIVES. General Objective

UNIT 2. INTRODUCTION TO DC GENERATOR (Part 1) OBJECTIVES. General Objective DC GENERATOR (Part 1) E2063/ Unit 2/ 1 UNIT 2 INTRODUCTION TO DC GENERATOR (Part 1) OBJECTIVES General Objective : To apply the basic principle of DC generator, construction principle and types of DC generator.

More information

Instructor. Payam Zarbakhsh. Department of electrical electronics engineering

Instructor. Payam Zarbakhsh. Department of electrical electronics engineering Instructor Payam Zarbakhsh Department of electrical electronics engineering Electrical Machines Induction Motors_Note(1) Comparing with synchronous motor No dc field current is required to run the machine.

More information

INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad

INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad - 500 043 MECHANICAL ENGINEERING ASSIGNMENT Name : Electrical and Electronics Engineering Code : A40203 Class : II B. Tech I Semester Branch :

More information

Gener. Instructor: Center

Gener. Instructor: Center PDHonline Course E404 (4 PDH) Alternating Current Gener rators and Motors Instructor: Lee Layton, P.E 2013 PDH Online PDH Center 5272 Meadow Estatess Drive Fairfax, VA 22030-6658 Phone & Fax: 703-988-0088

More information

EXPERIMENT 19. Starting and Synchronizing Synchronous Machines PURPOSE: BRIEFING: To discover the method of starting synchronous motors.

EXPERIMENT 19. Starting and Synchronizing Synchronous Machines PURPOSE: BRIEFING: To discover the method of starting synchronous motors. EXPERIMENT 19 Starting and Synchronizing Synchronous Machines PURPOSE: To discover the method of starting synchronous motors. BRIEFING: When three-phase is applied to the stator of a three-phase motor,

More information

AE105 PRINCIPLES OF ELECTRICAL ENGINEERING JUNE 2014

AE105 PRINCIPLES OF ELECTRICAL ENGINEERING JUNE 2014 Q.2 a. Explain in detail eddy current losses in a magnetic material. Explain the factors on which it depends. How it can be reduced? IETE 1 b. A magnetic circuit with a single air gap is shown in given

More information

SYLLABUS 1. SYNCHRONOUS GENERATOR 9 2. SYNCHRONOUS MOTOR 8

SYLLABUS 1. SYNCHRONOUS GENERATOR 9 2. SYNCHRONOUS MOTOR 8 SYLLABUS 1. SYNCHRONOUS GENERATOR 9 Constructional details Types of rotors emf equation Synchronous reactance Armature reaction Voltage regulation EMF, MMF, ZPF and A.S.A methods Synchronizing and parallel

More information

CHAPTER 6 INTRODUCTION TO MOTORS AND GENERATORS

CHAPTER 6 INTRODUCTION TO MOTORS AND GENERATORS CHAPTER 6 INTRODUCTION TO MOTORS AND GENERATORS Objective Describe the necessary conditions for motor and generator operation. Calculate the force on a conductor carrying current in the presence of the

More information