AGENDA: DAY 1 19 April (Tuesday)
|
|
|
- Solomon Floyd
- 5 years ago
- Views:
Transcription
1 AGENDA: DAY 1 19 April (Tuesday) TIME PRESENTATION COMPANY 8:00-9:00 Registration 9:00-9:30 Introduction & Version 12.1 Overview ThermoAnalytics, Inc. 9:30-10:00 Automotive Cabin Solar Loading Impact for Electrical System Performance Jaguar-Land Rover 10:00-10:30 Temperature Influences on the Aerodynamics of an Aston Martin GT12 Model Aston Martin 10:30-11:00 CATERED COFFEE BREAK 11:00-11:30 Introducing CoTherm: New Automated Coupling Process with CFD ThermoAnalytics, Inc. 11:30-12:00 Development Roadmap ThermoAnalytics, Inc. 12:00-13:30 CATERED LUNCH BREAK 13:30-14:00 Underhood/Underbody Thermal Validation Using Fluid Network Jaguar-Land Rover 14:00-14:30 Coupling TAITherm & GT-SUITE for Detailed Climate Control Simulation ThermoAnalytics, Inc. & Gamma Technologies 14:30-15:00 Modeling Enhanced Climate Control Seats Gentherm 15:00-15:30 Thermal Sensation in Moderate Environments - Which Model to Use? EMPA 15:30-16:00 CATERED COFFEE BREAK
2 AGENDA: DAY 1 19 April (Tuesday) TIME PRESENTATION COMPANY 16:00-16:30 Simulating Exhaust Isolators FIAT 16:30-17:00 Engine Bay Cooldown Simulation Autoneum 17:00-17:30 NEW TAITherm Post Processing Features (demo) ThermoAnalytics, Inc. 17:30-18:00 Fluid Streams & New Exhaust Modeling Capabilities in TAITherm ThermoAnalytics, Inc. 19:00 Evening Event: Dream-Bowl Palace, Apianstraße 9, 85774, Unterföhring
3 AGENDA: DAY 2 20 April (Wednesday) TIME PRESENTATION COMPANY 9:00-9:30 Incorporating Moisture Mass Transfer in TAITherm to Model Windshield De-icing ThermoAnalytics, Inc. 9:30-10:00 Climatic Wind Tunnel BMW 10:00-10:30 Using Heatpipes for Signature Alteration - A Modelling and Simulation Approach Fraunhofer IOSB 10:00-10:30 Battery Modeling Presentation ThermoAnalytics, Inc. 10:30-10:45 CATERED COFFEE BREAK 10:45-11:15 Topic to be announced soon BMW 11:15-12:00 12:00-1:00 CATERED LUNCH BREAK Please note that the brake session will start after lunch. See the following page for more details.
4 TECHNICAL SESSIONS 1-on-1 Technical Sessions 1-on-1 technical meetings can be scheduled for one to three hours during the course of the UGM. This meeting is a 1-on-1 meeting with an engineer from ThermoAnalytics. Bring your TAITherm and/or CFD model and technical questions. This is a working session which focuses on your needs and questions. Openings are available on the following days: Monday, April 18 Wednesday, April 20 Thursday, April 21 Brake Technical Session 20 April (Wednesday) Advanced transient methods in TAITherm can simulate any transient brake cycle. Discover an efficient and innovative design process that supports fast turnaround for vehicle development. This hands-on technical session will include topics such as: Setting up brake models and running transient simulation Thermal CFD simulation process Modeling brake fade Process automation Accelerating simulation turn-around time Cabin Comfort Technical Session ThermoAnalytics Cabin Comfort focus session will educate engineers on the current best practices, limitations, and latest technologies for simulating human cabin comfort. Emphasis will be placed on the following topics: Human geometry generation techniques (starting from CAD, using 3D scanner, etc.) Setting up and analyzing transient human thermal and human comfort simulations Automated human comfort parametric analysis and reporting Cabin comfort simulations with virtual human response including coupling test manikins and developing efficient virtual verification process Planning, setting up and developing consistent cabin comfort tests that are consistent and enable CAE model correlation Realistic animation of human geometry for transient thermal simulation Using human thermal comfort model to provide virtual human control of the HVAC system Simulating localized effects on human comfort (for example for heated and cooled seats) Setting up and scaling female and male passenger parameters such as height and weight
5 TECHNICAL SESSIONS GT-SUITE Technical Session At this technical session you will learn how to design and control an entire HVAC system and transient cabin comfort simulation using the tight coupling of GT-SUITE and TAITherm. This coupling process leads to an efficient solution that is faster than real time. This session will also include topics such as: Transient 3D simulation of cabin heat transfer 1D simulation of the A/C loop and controls Assessment of occupant thermal comfort with manikin model Controlling the HVAC system using manikin model comfort metrics as input Design optimization IR Technical Session Understand the power of our simulation process using TAIThermIR, one of the worlds most advanced thermal and infrared programs. Learn more about TAIThermIR s powerful features and how you can solve even the most complex infrared challenges. EO/IR modeling and process workflow Maritime and airborne target modeling discussion Advanced EO/IR modeling topics Texture mapping, super-sampling Inclusion of atmospheric effects Sensor blur and sensor noise Probability of detection Modeling targets in visible and Near-IR spectrums Scene simulation including moving targets and sensor platforms
6 Software Training Session Join ThermoAnalytics for TAITherm and TAIThermIR software training. The TAITherm training session covers the use of TAITherm for thermal analysis using a wide variety of practical examples. The TAIThermIR session will cover a variety of IR topics. Stay connected through the ThermoAnalytics website and social media pages! Facebook: ThermoAnalytics, Inc. LinkedIn: ThermoAnalytics, Inc. Website: Blog: Support Site: EVENT SPONSORS
Design and Calibration of the Jaguar XK Adaptive Cruise Control System. Tim Jagger MathWorks International Automotive Conference 2006
Design and Calibration of the Jaguar XK Adaptive Cruise Control System Tim Jagger MathWorks International Automotive Conference 26 JAGUAR XK Page 3 ADAPTIVE CRUISE CONTROL(ACC) MODEL BASED CALIBRATION
SIMULIA Overview: Accelerating Innovation with Realistic Simulation
SIMULIA Overview: Accelerating Innovation with Realistic Simulation SIMULIA Overview Agenda SIMULIA Mission & Brand Position SIMULIA Product Portfolio Industry Examples Summary 2 SIMULIA Vision To Make.
Robotics. BEGINNERS: Mondays 4:00 to 5:15 PM April 10 to June 12 LEVEL 3: Thursdays 4:00 to 5:15 PM April 20 to June 8
Robotics 3 & 4 Intro to Robotics (co-ed) Help your child develop science, math, and teamwork skills through building and basic programming with LEGO Smarthub 2 I/O robots. Children in higher levels will
Full Vehicle Simulation for Electrification and Automated Driving Applications
Full Vehicle Simulation for Electrification and Automated Driving Applications Vijayalayan R & Prasanna Deshpande Control Design Application Engineering 2015 The MathWorks, Inc. 1 Key Trends in Automotive
Design and evaluate vehicle architectures to reach the best trade-off between performance, range and comfort. Unrestricted.
Design and evaluate vehicle architectures to reach the best trade-off between performance, range and comfort. Unrestricted. Introduction Presenter Thomas Desbarats Business Development Simcenter System
Army Ground Vehicle Use of CFD and Challenges
Army Ground Vehicle Use of CFD and Challenges Scott Shurin 586-282-8868 scott.shurin@us.army.mil : Distribution A: Approved for public release Outline TARDEC/CASSI Introduction Simulation in the Army General
Automobile Body, Chassis, Occupant and Pedestrian Safety, and Structures Track
Automobile Body, Chassis, Occupant and Pedestrian Safety, and Structures Track These sessions are related to Body Engineering, Fire Safety, Human Factors, Noise and Vibration, Occupant Protection, Steering
Simulation of joining technologies to support JLR new model development. Dr Li Wang (PhD, CEng, MIMechE) AME, BIW, Joining Technologies
Simulation of joining technologies to support JLR new model development Dr Li Wang (PhD, CEng, MIMechE) AME, BIW, Joining Technologies Contents Introduction Joint feasibility simulation Joint performance
State of the art cooling system development for automotive applications
State of the art cooling system development for automotive applications GT Conference 2017, Frankfurt A. Fezer, TheSys GmbH P. Sommer, A. Diestel, Mercedes-AMG GmbH Content Introduction Cooling system
Business Conference Facilitation. Automotive Thermal Management
C O N F E R E N C E 2 0 1 8 ABOUT US 3 February 1-2 BCF Group is a professional organizer of high-level B2B events. We produce, conduct and coordinate conferences, summits and forums in major business
Downsizing Powertrains NVH Implications and Solutions for Vehicle Integration
Downsizing Powertrains NVH Implications and Solutions for Vehicle Integration Realize innovation. Downsizing Powertrains NVH Implications and Solutions for Vehicle Integration Downsizing trends and NVH
University Of California, Berkeley Department of Mechanical Engineering. ME 131 Vehicle Dynamics & Control (4 units)
CATALOG DESCRIPTION University Of California, Berkeley Department of Mechanical Engineering ME 131 Vehicle Dynamics & Control (4 units) Undergraduate Elective Syllabus Physical understanding of automotive
Battery Cooling for Electrified Vehicles Gaetan Damblanc Product Manager
Battery Cooling for Electrified Vehicles Gaetan Damblanc Product Manager Unestricted Siemens AG 2017 Realize innovation. Agenda Industry challenges A wide length scale solution Battery pack cooling simulations
Seeing Sound: A New Way To Reduce Exhaust System Noise
\ \\ Seeing Sound: A New Way To Reduce Exhaust System Noise Why Do You Need to See Sound? Vehicle comfort, safety, quality, and driver experience all rely on controlling the noise made by multiple systems.
With digital twin to the Factory of the Future Part I
With digital twin to the Factory of the Future Part I Bosch Rexroth and Dassault Systèmes will use a modular assembly line to show how the Factory of the Future can be efficiently planned, implemented
THERMAL MANAGEMENT SYNERGY THROUGH INTEGRATION PETE BRAZAS
THERMAL MANAGEMENT SYNERGY THROUGH INTEGRATION PETE BRAZAS 1 Propulsion System Trends Evolution of the TMM A Closer Look at Electrification System Integration Approach Outlook Powertrain Technology Roadmap
Introduction to Abaqus/CAE. Abaqus 2018
Introduction to Abaqus/CAE Abaqus 2018 About this Course Course objectives Upon completion of this course you will be able to: Use Abaqus/CAE to create complete finite element models. Use Abaqus/CAE to
Developing Engineering Skills for the Future. José Lopes CEng FIET FIMechE Head of Technical Excellence Jaguar Land Rover Limited
Developing Engineering Skills for the Future José Lopes CEng FIET FIMechE Head of Technical Excellence Jaguar Land Rover Limited Jaguar Land Rover Technology & Innovation Focus Education by Industry Leading
Aerodynamic Drag Assessment
Aerodynamic Drag Assessment Computer Fluid Dynamics (CFD) analysis was used in the ULSAB-AVC Program to evaluate the aerodynamic concept from the very beginning of vehicle concepts. 11.1 BACKGROUND A vehicle
Introduction to vehicle NVH and Acoustics
Introduction to vehicle NVH and Acoustics Realize innovation. Agenda Introduction to NVH Powertrain NVH analysis Interior vehicle NVH Exterior acoustics Conclusion Page 2 What is NVH? Noise Audible disturbance
Holistic Range Prediction for Electric Vehicles
Holistic Range Prediction for Electric Vehicles Stefan Köhler, FZI "apply & innovate 2014" 24.09.2014 S. Köhler, 29.09.2014 Outline Overview: Green Navigation Influences on Electric Range Simulation Toolchain
Batteries, Super Capacitors, Fuel Cells & EV`s Seminar April 9-10, 2018 Vimercate (MB), Italy
Batteries, Super Capacitors, Fuel Cells & EV`s Seminar April 9-10, 2018 Vimercate (MB), Italy The seminar program focuses on present and future needs of portable and stationary electrochemical energy sources
Balancing operability and fuel efficiency in the truck and bus industry
Balancing operability and fuel efficiency in the truck and bus industry Realize innovation. Agenda The truck and bus industry is evolving Model-based systems engineering for truck and bus The voice of
Composites Modeler for Abaqus/CAE. Abaqus 2018
Composites Modeler for Abaqus/CAE Abaqus 2018 About this Course Course objectives In this course you will learn about: Composites Modeler for Abaqus/CAE, an add-on product to Abaqus/CAE How to use Composites
Integrated Architectures Management, Behavior models, Controls and Software
Integrated Architectures Management, Behavior models, Controls and Software Realize innovation. Engineering challenges Bringing everything together Fuel efficiency Emissions Acceleration Performance Energy
Truck Cooling Package Optimization. Reducing the size of a cooling package thanks to 1-D Transient simulations
Truck Cooling Package Optimization Reducing the size of a cooling package thanks to 1-D Transient simulations VOLVO group presentation What we do ON THE ROAD IN THE CITY We employ almost 100,000 PEOPLE,
FLUID DYNAMICS TRANSIENT RESPONSE SIMULATION OF A VEHICLE EQUIPPED WITH A TURBOCHARGED DIESEL ENGINE USING GT-POWER
GT-SUITE USERS CONFERENCE FRANKFURT, OCTOBER 20 TH 2003 FLUID DYNAMICS TRANSIENT RESPONSE SIMULATION OF A VEHICLE EQUIPPED WITH A TURBOCHARGED DIESEL ENGINE USING GT-POWER TEAM OF WORK: A. GALLONE, C.
Validation and Optimization of Front End Cooling Module for Commercial Vehicle using CFD Simulation
Validation and Optimization of Front End Cooling Module for Commercial Vehicle using CFD Simulation Ashok Patidar, Umashanker Gupta, Nitin Marathe VE Commercial Vehicles Ltd. INDIA (A VOLVO GROUP AND EICHER
Five Cool Things You Can Do With Powertrain Blockset The MathWorks, Inc. 1
Five Cool Things You Can Do With Powertrain Blockset Mike Sasena, PhD Automotive Product Manager 2017 The MathWorks, Inc. 1 FTP75 Simulation 2 Powertrain Blockset Value Proposition Perform fuel economy
neuron An efficient European cooperation scheme
DIRECTION GÉNÉRALE INTERNATIONALE January, 2012 neuron An efficient European cooperation scheme I - INTRODUCTION 2 II - AIM OF THE neuron PROGRAMME 3 III - PROGRAMME ORGANISATION 4 IV - AN EFFICIENT EUROPEAN
Training Program 2018 Where Education Meets Technology
Training Program 2018 Where Education Meets Technology January December 2018 Training Program 2018 At Ziehm Imaging, we are strongly committed to our customers and their patients. Which means a lot more
USE OF 1D SIMULATION IN THE COOLING SYSTEMS DESIGN PROCESS
Dr. Bernhard Zuck; 24.10.2011 USE OF 1D SIMULATION IN THE COOLING SYSTEMS DESIGN PROCESS FROM SYSTEM CONCEPT TO FINAL VALIDATION CONTENT 1. Demands and challenges facing Simulation 2. Considered System
Mechatronics and the Motor Car
A46 A45 Mechatronics and the Motor Car Kon-41.5151 seminar Jan Akmal, Prabilson & Param Jolly Slide 1 A45 A46 How many of you have a driving license for a car? How many of you have driven a car? Author;
Udvavisk. Engineering Analysis with CFD. 1st Floor (B), Tower II, Ramana Complex #322, Velachery Main Road Velachery, Chennai
Udvavisk Engineering Analysis with CFD 1st Floor (B), Tower II, Ramana Complex # Velachery, Chennai 600042 1 Course outline 1.1 Engineering Analysis with CFD Flow and Aero-dynamic analyis around car body
Simulating Systems in Ground Vehicle Design Frederick J. Ross Director, Ground Transportation
Simulating Systems in Ground Vehicle Design Frederick J. Ross Director, Ground Transportation Agenda: Simulating Systems Maturity of Simulation Growing from validation to virtual simulation Simulating
White Paper Nest Learning Thermostat Efficiency Simulation for the U.K. Nest Labs April 2014
White Paper Nest Learning Thermostat Efficiency Simulation for the U.K. Nest Labs April 2014 Introduction This white paper gives an overview of potential energy savings using the Nest Learning Thermostat
Flying Fox DARPA Grand Challenge. Report to Sponsors. May 5, 2005
Flying Fox 2005 DARPA Grand Challenge Report to Sponsors May 5, 2005 The vehicle name, Flying Fox, originates from a bat with unusually sharp vision Page 1 DARPA Site Visit 18 team members showed up for
THE FKFS 0D/1D-SIMULATION. Concepts studies, engineering services and consulting
THE FKFS 0D/1D-SIMULATION Concepts studies, engineering services and consulting r e s e a r c h i n m o t i o n. VEHICLE IN MOTION On the basis of constant engine speeds and loads, the combustion engine
Batteries & Fuel Cells Seminar. Seminar Program Topics. Seminar Schedule - April 7-8, full days. Seminar Location. In partnership with:
Batteries & Fuel Cells Seminar About Batteries & Fuel Cells Seminar The seminar program focuses on present and future needs of portable and stationary electrochemical energy sources and highlights the
AUTOMOTIVE TESTING AND OPTIMIZATION. Tools for designing tomorrow's vehicles
AUTOMOTIVE TESTING AND OPTIMIZATION Tools for designing tomorrow's vehicles 2 Measurement of flow around the side mirror by Particle Image Velocimetry (PIV). Courtesy of Visteon Deutschland GmbH Our advanced
Simulink as a Platform for Full Vehicle Simulation
Simulink as a Platform for Full Vehicle Simulation Mike Sasena (Product Manager) Lars Krause (Application Engineer) Ryan Chladny (Development) 2018 The MathWorks, Inc. 1 Fuel Economy Simulation 2 Vehicle
TEREX CRANES TO SHOWCASE NEW PRODUCTS AND INNOVATIONS AT BAUMA 2016
News Release Contact Information: Terex Cranes Marketing Communication Tel. + 49 / 6332 83 1023 E-mail: news.cranes@terex.com TEREX CRANES TO SHOWCASE NEW PRODUCTS AND INNOVATIONS AT BAUMA 2016 MUNICH,
Integration of complex Modelica-based physics models and discrete-time control systems: Approaches and observations of numerical performance
Integration of complex Modelica-based physics models and discrete-time control systems: Approaches and observations of numerical performance Kai Wang 1 Christopher Greiner 1 John Batteh 2 Lixiang Li 2
Friday Midterm EXAMINATION Fall 2018 CREDIT HOURS ENGINEERING PROGRAMS AIN SHAMS UNIVERSITY FACULTY OF ENGINEERING
HUM311 Engineering Management 176 HUMN362 Engineering Management 1 14:00 16:00 224, 261 CEP 011 Engineering Drawing (2) 247 14:00 16:00 901, 901A, 902A, 902B,904, 250 Friday 9-11-2018 PHM022 Waves, Electricity,
Batteries, Super Capacitors, Fuel Cells & EV`s Seminar
Batteries, Super Capacitors, Fuel Cells & EV`s Seminar April 9 th -10 th, 2015 - Borehamwood, UK The seminar program focuses on present and future needs of portable and stationary electrochemical energy
MSC/Flight Loads and Dynamics Version 1. Greg Sikes Manager, Aerospace Products The MacNeal-Schwendler Corporation
MSC/Flight Loads and Dynamics Version 1 Greg Sikes Manager, Aerospace Products The MacNeal-Schwendler Corporation Douglas J. Neill Sr. Staff Engineer Aeroelasticity and Design Optimization The MacNeal-Schwendler
Development of Energy Balance Simulation Method for Vehicles
New technologies Development of Energy Balance Simulation Method for Vehicles Shigeyoshi Kadokura* Daisuke Konno* Hiroshi Ezaki* Kazunori Sekine** Chiharu Katsuyama** Tomohiro Nishizawa** Abstract In recent
Large engine vibration analysis using a modular modelling approach
Large engine vibration analysis using a modular modelling approach Dr.-Ing. Jochen Neher Mechanics, Engine Structure 16th, October, 2018 Dr. Alexander Rieß Mechanics, Power Train Marko Basic AVL-AST d.o.o.
Trends and applications of Nanotechnology on automotive glass.
Trends and applications of Nanotechnology on automotive glass. Nov. 2017 Rosa Ramírez García CONTENT 1. Trends in automotive glass 2. Applications that use Nanotechnology Glazings using soft coatings,
Holistic 1D-Model for Cooling Management and Engine Analysis of a Heavy-Duty Truck
Holistic 1D-Model for Cooling Management and Engine Analysis of a Heavy-Duty Truck Dominik Renner Dr. Alexander Schydlo 26 th October 2015 MAN Truck & Bus AG < 1 > Agenda 1 Introduction 2 Model Description
Innovation Days Efficient Dynamics. Energy and Environmental Test Centre.
Innovation Days Efficient Dynamics. Energy and Environmental Test Centre. Workshop: Environmental Wind Tunnel. Environmental Wind Tunnel. Environmental Wind Tunnel. Environmental Wind Tunnel. Environmental
Embedding Technology in Transportation Courses Symposium on Active Student Engagement in Civil and Transportation Engineering
Embedding Technology in Transportation Courses Symposium on Active Student Engagement in Civil and Transportation Engineering Louisiana Tech University, Ruston, LA July 24-26, 2016 Overview Introduction
Automotive NVH with Abaqus. Abaqus 2018
Automotive NVH with Abaqus Abaqus 2018 About this Course Course objectives Upon completion of this course you will be able to: Perform natural frequency extractions Perform sound radiation analyses (acoustics)
HERGOTT Julien & MOISY Alexandre EHRS modelling with GT-Suite European GT Conference 2015
HERGOTT Julien & MOISY Alexandre 26-10 - 2015 EHRS modelling with GT-Suite European GT Conference 2015 Reduce CO2 by more than 50% in Europe, USA and China between 2005 and 2025 Average CO2 emissions from
CAE Services and Software BENTELER Engineering.
CAE Services and Software BENTELER Engineering BENTELER Engineering offers development services in market segments such as Automotive, Public Transportation, Commercial Vehicles, Shipbuilding and Industry.
Icing Wind Tunnel tests in the framework of a Wing Ice Protection system certification process
Icing Wind Tunnel tests in the framework of a Wing Ice Protection system certification process AirTN-NextGen Workshop on Virtual testing, towards virtual certification Amsterdam (NL), May 25, 2016 Use
ASTM Standard for Hit/Miss POD Analysis
ASTM Standard for Hit/Miss POD Analysis Jennifer Brown, Steve James Pratt & Whitney Rocketdyne MAPOD Working Group Meeting November 19, 2010 1 Agenda ASTM Standard General Information Scope & Rationale
17/11/2016. Turbomachinery & Heat Transfer Laboratory Faculty of Aerospace Engineering Technion Israel Institute of Technology, Israel
17/11/2016 Turbomachinery & Heat Transfer Laboratory Faculty of Aerospace Engineering Technion Israel Institute of Technology, Israel 1 Motivation New challenges rise due to increase in demands from small
Climate Control Load Reduction Strategies for Electric Drive Vehicles in Cold Weather
Climate Control Load Reduction Strategies for Electric Drive Vehicles in Cold Weather Preprint Matthew Jeffers, Lawrence Chaney, and John Rugh To be presented at the SAE 2016 World Congress & Exhibition
Vehicle Aerodynamics Subscription Development of Numerical Simulation Method of Flow Around Automobile Using Meshfree Method
Vehicle Aerodynamics Subscription 2005-01-0544 Development of Numerical Simulation Method of Flow Around Automobile Using Meshfree Method 2005-01-0545 A Downforce Optimization Study for a Racing Car Shape
itpms-in-the-loop Solution for Comprehensive Validation Tasks for indirect Tire Pressure Monitoring Systems According to the New ECE-R 64 Regulation
Taking you to the next level apply & Innovate 2012, IPG Technology Conference, Karlsruhe, 21 and 22 June 2012 itpms-in-the-loop Solution for Comprehensive Validation Tasks for indirect Tire Pressure Monitoring
Combining Optimisation with Dymola to Calibrate a 2-zone Predictive Combustion Model.
Combining Optimisation with Dymola to Calibrate a 2-zone Predictive Combustion Model. Mike Dempsey Optimised Engineering Design Conference 2016 Claytex Services Limited Software, Consultancy, Training
Integrated Engine and Coolant Circuit Modeling with GT-SUITE. Oliver Roessler Vincenzo Bevilacqua, Raymond Reinmann
Integrated Engine and Coolant Circuit Modeling with GT-SUITE Oliver Roessler Vincenzo Bevilacqua, Raymond Reinmann 1 Overview Objective Simulation Steps Model build-up & Variants Integration Conclusion
Magna Steyr Engineering
Automobile and transportation Product Simcenter Leading partner for OEMs implements model-based systems engineering for hybrid vehicle development Business challenges Improve vehicle fuel efficiency in
AFRICA CLEAN MOBILITY WEEK March 2018, Conference Room 3 UN Environment Headquarters- Nairobi Kenya
AFRICA CLEAN MOBILITY WEEK 2018 12-16 March 2018, Conference Room 3 Headquarters- Nairobi Kenya Monday, 12 March 2018 The GLOBAL FUEL ECONOMY INITIATIVE (GFEI) 08:30-09:00 Registration 09:00-09:15 Welcome
Increasing Robustness and Reliability of a Race Car Engine. Patrick Bandeira
Increasing Robustness and Reliability of a Race Car Engine Patrick Bandeira About us LOCATIONS»Banbury»Milton Keynes NEW HEADQUARTERS»120,000 sq ft»next to M40, Banbury Not only motorsport ON THE ROAD
A Importância da Modelagem Multifísica no Desenvolvimento de Veículos Dr. Cesareo de La Rosa Siqueira ESSS - Business Manager
A Importância da Modelagem Multifísica no Desenvolvimento de Veículos Dr. Cesareo de La Rosa Siqueira ESSS - Business Manager 2007 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary ESSS at a Glance
PERFORMANCE UPGRADE? I CHOOSE RACECHIP!
SIMPLY FASTER. PERFORMANCE UPGRADE? I CHOOSE RACECHIP! Nick Heidfeld has been brand ambassador for RaceChip Chiptuning since April 2017. He currently races in Formula E and was one of the most successful
DELEGATE INFORMATION. 30 October 1 November 2018 ETIHAD STADIUM I MELBOURNE. Share, show. and shine. Proudly presented by
DELEGATE INFORMATION 30 October 1 November 2018 ETIHAD STADIUM I MELBOURNE Share, show and shine. Proudly presented by Grow your car wash business Car Wash Show Australia is the ONLY Car Wash Industry
Investigation of Radiators Size, Orientation of Sub Cooled Section and Fan Position on Twin Fan Cooling Packby 1D Simulation
Investigation of Radiators Size, Orientation of Sub Cooled Section and Fan Position on Twin Fan Cooling Packby 1D Simulation Neelakandan K¹, Goutham Sagar M², Ajay Virmalwar³ Abstract: A study plan to
LMS Imagine.Lab AMESim Electromechanical
LMS Imagine.Lab AMESim Electromechanical LMS Imagine.Lab Electromechanical LMS Imagine.Lab Electromechanical helps engineers define straightforward strategies throughout the design process of electrical
Roadscanners Products for Intelligent Asset Management
ERPUG 2017 Meeting Kopenhagen 20.10.2017 Roadscanners Products for Intelligent Asset Management Timo Saarenketo, Jan Filipovsky Roadscanners Group Copyright Roadscanners 2017. All Rights Reserved. Current
Workshop on Design and Implementation of Power Converters with EMC/EMI Modelling for Micro Grid & Electric Vehicle Applications
Workshop on Design and Implementation of Power Converters with EMC/EMI Modelling for Micro Grid & Electric Vehicle Applications 18 th - 21 st July 2018 By- Power Electronics Lab (EE Department) Indian
SAVE 20% With Group Discounts
GALM- e UROPE SAVE 20% With Group Discounts 24TH - 25TH APRIL 2019 H4 HOTEL MÜNCHEN MESSE, GERMANY, MUNICH 2019 SPEAKER LINE-UP INCLUDE... Innovative Multi-Material Lightweight Solutions To Reduce Vehicle
Two-Stroke Diesel & X-DF Engines
Two-Stroke Diesel & X-DF Engines Training Courses CMA CGM A valuable investment WinGD training courses are conducted by professional, STCW-95 certified instructors to improve the technical and operational
Current and Future Applications of MEMS for Automotive Industry
Current and Future Applications of MEMS for Automotive Industry June 2013 Moscow, Russia Christophe Fitamant Yole Développement Sales and Marketing Director 2013 Copyrights Yole Développement SARL. All
The company supplies some of the world s most advanced engine testing systems ranging from combustion analysis to fully automated test benches.
FEV is an internationally recognized leader in the design and development of internal combustion engines and supplier of advanced test and instrumentation systems. Founded in 1978, the company today employs
Next-generation Inverter Technology for Environmentally Conscious Vehicles
Hitachi Review Vol. 61 (2012), No. 6 254 Next-generation Inverter Technology for Environmentally Conscious Vehicles Kinya Nakatsu Hideyo Suzuki Atsuo Nishihara Koji Sasaki OVERVIEW: Realizing a sustainable
Continental Engineering Services
Automotive and transportation Services Product Simcenter Engineering firm uses Simcenter Amesim to optimize driving range of electric vehicles Business challenges Be recognized as an expert in electric
Achieving Energy Efficiency through Smart Grid. Patty Anderson McKinstry Joe Castro City of Boulder
Achieving Energy Efficiency through Smart Grid Patty Anderson McKinstry Joe Castro City of Boulder ENERGY SUPPLY AND DEMAND SUPPLY SIDE POLICIES ISSUES CO 2 emissions Fixed fuel source Dirty energy INITIATIVES
Advanced Rotordynamic Bearing Technology And Case Histories in the Rotating Machinery Industry
Location: Florence, Italy Rotor Bearing Solutions International (RBSI) General Electric Oil and Gas Lecturers: 1. Paul Allaire, Chief Technical Officer, Rotor Bearing Solutions International (RBSI), Also,
Automotive Electronics/Connectivity/IoT/Smart City Track
Automotive Electronics/Connectivity/IoT/Smart City Track The Automobile Electronics Sessions explore and investigate the ever-growing world of automobile electronics that affect virtually every aspect
Dr Mark White Chief Engineer, Body Complete, Jaguar Land Rover Product Development
Right Material for the Right Part Identify Cost Effective Routes To Achieving Scalable Solutions For Mass-Market Product - Optimal Multi-Material Combinations Including Aluminium, Magnesium & Composites
Program. International GE LM6000, LM2500 & LM1600 User Conference. 6-9 November 2018, Crowne Plaza Hotel, The Hague The Netherlands
Program International GE LM6000, LM2500 & LM1600 User Conference 6-9 November 2018, Crowne Plaza Hotel, The Hague The Netherlands Summary Conference Program Time Tuesday 6 November Program Location 18:00
Features of PSEC Educational Programs
Power Systems & Energy Course 2018 These intensive four-week programs are designed to strike the necessary balance between energy systems engineering theory and relevant, real-world applications. With
Engine Encapsulation for Increased Fuel Efficiency of Road Vehicles
Engine Encapsulation for Increased Fuel Efficiency of Road Vehicles A project within the program: Energy and Environment Start: July 2013 End: June 2017 Blago Minovski Department of Mechanics and Maritime
Calibration and Simulation of the Automotive E-Coat Dipping Process in STAR-CCM+ (V8.02) Frank Pfluger, Klaus Wechsler CD-adapco
Calibration and Simulation of the Automotive E-Coat Dipping Process in STAR-CCM+ (V8.02) Frank Pfluger, Klaus Wechsler CD-adapco How Virtual Manufacturing Can Support Digital Product Development Better
CAE Analysis of Passenger Airbag Bursting through Instrumental Panel Based on Corpuscular Particle Method
CAE Analysis of Passenger Airbag Bursting through Instrumental Panel Based on Corpuscular Particle Method Feng Yang, Matthew Beadle Jaguar Land Rover 1 Background Passenger airbag (PAB) has been widely
AUTOPILOT Webinar Series (II): Developing Automated Driving Pilots for IoT: Brainport
AUTOPILOT Webinar Series (II): Developing Automated Driving Pilots for IoT: Brainport 31 May 2018 16.00-17.00 CET 31/05/2018 This project has received funding from the European Union s Horizon 2020 research
Virtual Testing of the Full Vehicle System
Virtual Testing of the Full Vehicle System Mike Dempsey Claytex Services Limited Software, Consultancy, Training Based in Leamington Spa, UK Office in Cape Town, South Africa Experts in Systems Engineering,
The next revolution in simulation. Dr. Jan Leuridan Executive Vice-President, CTO LMS International
The next revolution in simulation Dr. Jan Leuridan Executive Vice-President, CTO LMS International The industry is facing faster and broader change (IBM CEO Survey 2008) Sustainability Radical new product
GRAND RENEWABLE ENERGY 2018
グランド再生可能エネルギー 2018 AIST-FREA スペシャルセッション 国際会議 GRAND RENEWABLE ENERGY 2018 AIST-FREA Special Session 2018/6/20 パシフィコ横浜会議センターにて AIST-FREA Session, Room 501 International Workshop: Challenges to Renewable
WITHOUT MUCH OF A STIR
WITHOUT MUCH OF A STIR The Train of the Future is Light and Fast and, Above All, Safe By Sigfried Loose S afely operating rail vehicles means taking numerous components into consideration. The vehicle
Implementation and application of Simpackmulti-attribute vehicle models at Toyota Motor Europe
Implementation and application of Simpackmulti-attribute vehicle models at Toyota Motor Europe Ernesto Mottola, PhD. Takao Sugai Vehicle Performance Engineering Toyota Motor Europe NV/SA Technical Center
Strategy for Promoting Centers of Excellence (CoE) Activities
Strategy for Promoting Centers of Excellence (CoE) Activities 1. The Background of the ITU Centers of Excellence (CoEs) Network: The Centres of Excellence project was established pursuant to resolutions
Modelling and Simulation Specialists
Modelling and Simulation Specialists Multi-Domain Simulation of Hybrid Vehicles Multiphysics Simulation for Autosport / Motorsport Applications Seminar UK Magnetics Society Claytex Services Limited Software,
Innovation and productivity in test-based engineering Bruno Massa Vice President Testing solutions Siemens PLM Software
Innovation and productivity in test-based engineering Bruno Massa Vice President Testing solutions Unrestricted. Realize innovation. Key trends that drive innovation in vehicle development and engineering
HPC. Abaqus. Modeling ABAQUS UNIFIED FEA SIMULATE REALISTIC PERFORMANCE WITH ADVANCED MULTIPHYSICS SOLUTIONS. Nonlinear.
ABAQUS UNIFIED FEA SIMULATE REALISTIC PERFORMANCE WITH ADVANCED MULTIPHYSICS SOLUTIONS Nonlinear Partner Solutions Modeling Abaqus Multiphysics Customization HPC ABAQUS UNIFIED FEA Industry Challenges
LUCS Summer School 2018 PROGRAM
LUCS Summer School 2018 PROGRAM Simula Metropolitan Center for Digital Engineering, The University of Oslo and Technical University of Berlin welcome you to the 2018 Summer School on Future Energy Information