Udvavisk. Engineering Analysis with CFD. 1st Floor (B), Tower II, Ramana Complex #322, Velachery Main Road Velachery, Chennai

Size: px
Start display at page:

Download "Udvavisk. Engineering Analysis with CFD. 1st Floor (B), Tower II, Ramana Complex #322, Velachery Main Road Velachery, Chennai"

Transcription

1 Udvavisk Engineering Analysis with CFD 1st Floor (B), Tower II, Ramana Complex # Velachery, Chennai

2 1 Course outline 1.1 Engineering Analysis with CFD Flow and Aero-dynamic analyis around car body and aerofoil Flow Analysis in hydraulic valves, nozzle, mixer and air - diffuser Thermal analysis Heat Exchanger, boiler, HVAC problems Analysis of turbo-machine, compressor & Fans etc. Conceptual Understanding of Fluid mechanics, Heat transfer,navier-stoke's equation, finite Volume and other CFD techniques solving through software and programming Project 2.Offered Mini Projects We will be providing from 2 to 3 months to the students, The project will be covering a broad area both from (FEA/CFD) Structural as well as fluid and thermal analysis. So as to mention some of the major projects that students can undertake are as follows. 2.1 CFD Projects Field of applications: Gear box, Passenger car for aerodynamic drag reduction, Intake Port in diesel engine, Rear spoiler on a car, automotive exhaust system, Automotive radiator, Louvred fin compact heat exchanger, Aerodynamic trailer devices for drag Reduction of heavy duty trucks, Air induction systems, wind tunnel, HVAC mixing box, Heat and air flow inside a refrigerator, Heat exchanger, Helical coil heat exchanger. Type of Analysis in CFD Projects: Thermal analysis, Pressure analysis, Flow analysis, Heat transfer analysis, Velocity analysis, Combustion analysis, Particulate Tracking, Conduction in solids, Steady state & Unsteady steady state analysis, Unsteady state Transient analysis, Flow thermal analysis, etc. 2

3 3 List of problems for CFD workshop 1. Flow through valves In this project the velocity and pressure difference is analysed. 2. Analysis of air flow over sports car The main purpose of this analysis is to study the velocity and pressure difference across the car under the wind tunnel condition. 3. Flow Analysis of a Venturi Injector In this project an internal laminar fluid flow through a venturi injector is analysed. 3

4 4. External flow around a submarine Simulate external flow around a submarine and study the flow behavier over the submarine surface. 5. Flow through carburator In this project to study the thermal-flow effect on the choke and oscillator in the carburator. 6. Flow through an air intake maniflod This project shows an example of how the internal airflow through an air intake can be analyzed. 7. Flow analysis in a mixing diffuser Simulation study of mixing behavier and pressure drop character of the gases. 4

5 8. Transient wake development behind boat This simulation models the transient formation of wakes behind a boat in water. 9. Aerodynamic analysis of a SemiTruck Trailer vehicle The project simulates external aerodynamics of a Semi-truck trailer vehicle via steady state turbulent flow analysis with the K-Omega SST model for turbulence modeling. 10. Transient Simulation of an Exhaust Manifold Study the Flow Behavier of exchaust gas in Exhaust Manifold. 11. Reatachment flow: Flow over a Backward-facing Step The flow of air over a backwardfacing step is simulated, and the reattachment length is analysed. 5

6 12. Scalar Transport in T-Junction Pipe The purpose of this numerical simulation is to validate the scalar mixing distribution of incompressible Single Phase Scalar Transport in a T-junction pipe. 13. Aerodynamics analysis of a Formula One F1 Race car Study the flow Separation of air over the car body. 14. Fluid flow analysis of a pipe junction To study the mixing of same fluids with different velocity. 6

7 15. Pipeline Network This simulation captures the nuances of turbulent pipe flow. Flow phenomena at bends, junctions and nozzles are visualized. 16. Flow through a Naca duct This project shows an example of how the internal airflow through an naca duct can be analyzed. 17. Air-conditioning simulation of an office space In this Project Simulating the Temperature And Velocity Distribution inside The Air Conditioned Room. 7

8 18. HVAC analysis of aircraft cabin In this Project, Simulating Air flow inside the Cabine in order to find the pressure and velocity Distribution in the Cabin. 19. Gas flow through catalytic converter and exhaust Flow Simulation of Gas in Exchaust Pipe, To Find the Pressure Drop And Velocity Distribution in the flow passage. 20. Turbulent Pipe Flow The simulation validates the incompressible turbulent flow solver for the k-epsilon and komega SST turbulence models. 8

9 21. Hagen-Poiseuille Flow The aim of this project is to validate the velocity and pressure parameters of incompressible steady-state laminar fluid flow through a pipe 22. Air flow within a hall The simulation was set up using the analysis type for steady-state, natural convection flow in the winter season. 23. Airflow through an inlet duct An inlet duct with three additional turning vanes is analysed. The additional turning vanes in the corner to adjust the air flow through it. 24. Aerodynamics of a pipe with vent holes This project shows an example of how the internal airflow through a medical device can be analyzed. 9

10 25. Car cabin flow analysis To Find the Velocity And Temperature Distribution in inside the car Cabine ( Cabin HVAC System) 26. Turbulent airflow around a motorbike To study the turbulent effect over the bike and the human. 27. Turbulent flow through a cyclone separator This Project Study the Pressure Drop and Turbulance Behavir of Air in Cyclone Separator. 10

11 28. Simulation of airflow around a football In this case a football is investigated with regards to the turbulent behavior of the surface pattern. 29. Server room cooling The air temperature and velocity inside a server room is analyzed using a thermo-fluid analysis type on code-saturne. 30. Airflow around a building In this project to study the flow and vertex formation around the building. 11

AEROSTAR SOLUTIONS. A Project Association AERONAUTICAL AND MECHANICAL PROJECTS FOR FINAL YEAR STUDENTS

AEROSTAR SOLUTIONS. A Project Association AERONAUTICAL AND MECHANICAL PROJECTS FOR FINAL YEAR STUDENTS AEROSTAR SOLUTIONS A Project Association AERONAUTICAL AND MECHANICAL PROJECTS FOR FINAL YEAR STUDENTS We had started our project center for the students who are seems too weak in subjects, lack of sources,

More information

EFFECT OF SURFACE ROUGHNESS ON PERFORMANCE OF WIND TURBINE

EFFECT OF SURFACE ROUGHNESS ON PERFORMANCE OF WIND TURBINE Chapter-5 EFFECT OF SURFACE ROUGHNESS ON PERFORMANCE OF WIND TURBINE 5.1 Introduction The development of modern airfoil, for their use in wind turbines was initiated in the year 1980. The requirements

More information

Foundations of Thermodynamics and Chemistry. 1 Introduction Preface Model-Building Simulation... 5 References...

Foundations of Thermodynamics and Chemistry. 1 Introduction Preface Model-Building Simulation... 5 References... Contents Part I Foundations of Thermodynamics and Chemistry 1 Introduction... 3 1.1 Preface.... 3 1.2 Model-Building... 3 1.3 Simulation... 5 References..... 8 2 Reciprocating Engines... 9 2.1 Energy Conversion...

More information

Vehicle Aerodynamics Subscription Development of Numerical Simulation Method of Flow Around Automobile Using Meshfree Method

Vehicle Aerodynamics Subscription Development of Numerical Simulation Method of Flow Around Automobile Using Meshfree Method Vehicle Aerodynamics Subscription 2005-01-0544 Development of Numerical Simulation Method of Flow Around Automobile Using Meshfree Method 2005-01-0545 A Downforce Optimization Study for a Racing Car Shape

More information

APPLICATION OF STAR-CCM+ TO TURBOCHARGER MODELING AT BORGWARNER TURBO SYSTEMS

APPLICATION OF STAR-CCM+ TO TURBOCHARGER MODELING AT BORGWARNER TURBO SYSTEMS APPLICATION OF STAR-CCM+ TO TURBOCHARGER MODELING AT BORGWARNER TURBO SYSTEMS BorgWarner: David Grabowska 9th November 2010 CD-adapco: Dean Palfreyman Bob Reynolds Introduction This presentation will focus

More information

Chapter 1: Introduction to Automobile Aerodynamics...1

Chapter 1: Introduction to Automobile Aerodynamics...1 Preface...xv Acknowledgments...xix Chapter 1: Introduction to Automobile Aerodynamics...1 1.1 Scope... 1 1.1.1 The Role of Aerodynamics in Vehicle Design... 1 1.1.2 The Character of Vehicle Aerodynamics...

More information

Investigation of Radiators Size, Orientation of Sub Cooled Section and Fan Position on Twin Fan Cooling Packby 1D Simulation

Investigation of Radiators Size, Orientation of Sub Cooled Section and Fan Position on Twin Fan Cooling Packby 1D Simulation Investigation of Radiators Size, Orientation of Sub Cooled Section and Fan Position on Twin Fan Cooling Packby 1D Simulation Neelakandan K¹, Goutham Sagar M², Ajay Virmalwar³ Abstract: A study plan to

More information

State of the art cooling system development for automotive applications

State of the art cooling system development for automotive applications State of the art cooling system development for automotive applications GT Conference 2017, Frankfurt A. Fezer, TheSys GmbH P. Sommer, A. Diestel, Mercedes-AMG GmbH Content Introduction Cooling system

More information

EXPERTS IN FLUID DYNAMICS AND STRUCTURAL ANALYSIS

EXPERTS IN FLUID DYNAMICS AND STRUCTURAL ANALYSIS EXPERTS IN FLUID DYNAMICS AND STRUCTURAL ANALYSIS Kinetic Sim is an engineering design and simulation consultancy specialising in computational fluid dynamics and structural analysis. Experience / Background

More information

AEROSTAR SOLUTIONS OUR MOTTO

AEROSTAR SOLUTIONS OUR MOTTO AEROSTAR SOLUTIONS AERONAUTICAL, MECHANICAL AND AUTOMOBILE PROJECTS FOR FINAL YEAR STUDENTS Aerostar solutions is one of the pioneer project centre which has been started by industrial professionals to

More information

CFD ANALYSIS OF FLUID FLOW AND HEAT TRANSFER IN A SINGLE TUBE-FIN ARRANGEMENT OF AN AUTOMOTIVE RADIATOR

CFD ANALYSIS OF FLUID FLOW AND HEAT TRANSFER IN A SINGLE TUBE-FIN ARRANGEMENT OF AN AUTOMOTIVE RADIATOR Proceedings of the International Conference on Mechanical Engineering 2005 (ICME2005) 28-30 December 2005, Dhaka, Bangladesh ICME05- CFD ANALYSIS OF FLUID FLOW AND HEAT TRANSFER IN A SINGLE TUBE-FIN ARRANGEMENT

More information

Study of intake manifold for Universiti Malaysia Perlis automotive racing team formula student race car

Study of intake manifold for Universiti Malaysia Perlis automotive racing team formula student race car Journal of Physics: Conference Series PAPER OPEN ACCESS Study of intake manifold for Universiti Malaysia Perlis automotive racing team formula student race car To cite this article: A Norizan et al 2017

More information

EFFECT OF SPOILER DESIGN ON HATCHBACK CAR

EFFECT OF SPOILER DESIGN ON HATCHBACK CAR EFFECT OF SPOILER DESIGN ON HATCHBACK CAR Ashpak Kazi 1 *, Pradyumna Acharya 2, Akhil Patil 3 and Aniket Noraje 4 1,2,3,4 Department of Automotive Engineering, School of Mechanical Engineering, VIT University,

More information

Thermal Analysis of Shell and Tube Heat Exchanger Using Different Fin Cross Section

Thermal Analysis of Shell and Tube Heat Exchanger Using Different Fin Cross Section Thermal Analysis of Shell and Tube Heat Exchanger Using Different Fin Cross Section J. Heeraman M.Tech -Thermal Engineering Department of Mechanical Engineering Ellenki College of Engineering & Technology

More information

AERODYNAMIC BICYCLE HELMET DESIGN USING A TRUNCATED AIRFOIL WITH TRAILING EDGE MODIFICATIONS

AERODYNAMIC BICYCLE HELMET DESIGN USING A TRUNCATED AIRFOIL WITH TRAILING EDGE MODIFICATIONS Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011 November 11-17, 2011, Denver, Colorado, USA IMECE2011-65411 AERODYNAMIC BICYCLE HELMET DESIGN USING A TRUNCATED

More information

STAR European Conference 2010 AERODYNAMICS DEVELOPMENTS ON A LE MANS PROTOTYPE ORECA 01 LMP1

STAR European Conference 2010 AERODYNAMICS DEVELOPMENTS ON A LE MANS PROTOTYPE ORECA 01 LMP1 STAR European Conference 2010 AERODYNAMICS DEVELOPMENTS ON A LE MANS PROTOTYPE ORECA 01 LMP1 PRESENTATION 1. ORECA Presentation 2. Why we use CFD? 2009 Aero Development 2010 Aero Development 3. Methodology

More information

ISSN (Online)

ISSN (Online) Computational Analysis of Aerodynamics Effects of a Rear Wing/Spoiler of Formula 1Car. [1] Piyush Chavda, [2] Darshan Ajuida. [1] M.Tech student, Department of Mechanical Engineering, Marwadi Education

More information

Seeing Sound: A New Way To Reduce Exhaust System Noise

Seeing Sound: A New Way To Reduce Exhaust System Noise \ \\ Seeing Sound: A New Way To Reduce Exhaust System Noise Why Do You Need to See Sound? Vehicle comfort, safety, quality, and driver experience all rely on controlling the noise made by multiple systems.

More information

AUTOMOTIVE TESTING AND OPTIMIZATION. Tools for designing tomorrow's vehicles

AUTOMOTIVE TESTING AND OPTIMIZATION. Tools for designing tomorrow's vehicles AUTOMOTIVE TESTING AND OPTIMIZATION Tools for designing tomorrow's vehicles 2 Measurement of flow around the side mirror by Particle Image Velocimetry (PIV). Courtesy of Visteon Deutschland GmbH Our advanced

More information

Design and Optimization of Contra-Rotating Fans Oliver Velde #, Christian Friebe &, Marius Korfanty #

Design and Optimization of Contra-Rotating Fans Oliver Velde #, Christian Friebe &, Marius Korfanty # Design and Optimization of Contra-Rotating Fans Oliver Velde #, Christian Friebe &, Marius Korfanty # # CFturbo GmbH & ILK Institut für Luft- und Kältetechnik ggmbh Motivation to use Contra-rotating fans

More information

NUMERICAL INVESTIGATION OF PISTON COOLING USING SINGLE CIRCULAR OIL JET IMPINGEMENT

NUMERICAL INVESTIGATION OF PISTON COOLING USING SINGLE CIRCULAR OIL JET IMPINGEMENT NUMERICAL INVESTIGATION OF PISTON COOLING USING SINGLE CIRCULAR OIL JET IMPINGEMENT BALAKRISHNAN RAJU, CFD ANALYSIS ENGINEER, TATA CONSULTANCY SERVICES LTD., BANGALORE ABSTRACT Thermal loading of piston

More information

Analysis of Aerodynamic Performance of Tesla Model S by CFD

Analysis of Aerodynamic Performance of Tesla Model S by CFD 3rd Annual International Conference on Electronics, Electrical Engineering and Information Science (EEEIS 2017) Analysis of Aerodynamic Performance of Tesla Model S by CFD Qi-Liang WANG1, Zheng WU2, Xian-Liang

More information

AERODYNAMIC IMPROVEMENT OF A TRUCK BODY BY USING CFD

AERODYNAMIC IMPROVEMENT OF A TRUCK BODY BY USING CFD AERODYNAMIC IMPROVEMENT OF A TRUCK BODY BY USING CFD K. Durga Priyanka #1 and Dr. B. Jayachandraiah *2 #1 M.Tech Student, CAD/CAM, Srikalahasteeswara institute of technology, Srikalahasthi, Chittoor dist,

More information

DESIGN AND ANALYSIS OF UNDERTRAY DIFFUSER FOR A FORMULA STYLE RACECAR

DESIGN AND ANALYSIS OF UNDERTRAY DIFFUSER FOR A FORMULA STYLE RACECAR DESIGN AND ANALYSIS OF UNDERTRAY DIFFUSER FOR A FORMULA STYLE RACECAR Ali Asgar S. Khokhar 1, Suhas S. Shirolkar 2 1 Graduate in Mechanical Engineering, KJ Somaiya College of Engineering, Mumbai, India.

More information

NUMERICAL INVESTIGATION OF FLUID FLOW AND HEAT TRANSFER CHARACTERISTICS ON THE AERODYNAMICS OF VENTILATED DISC BRAKE ROTOR USING CFD

NUMERICAL INVESTIGATION OF FLUID FLOW AND HEAT TRANSFER CHARACTERISTICS ON THE AERODYNAMICS OF VENTILATED DISC BRAKE ROTOR USING CFD THERMAL SCIENCE: Year 2014, Vol. 18, No. 2, pp. 667-675 667 NUMERICAL INVESTIGATION OF FLUID FLOW AND HEAT TRANSFER CHARACTERISTICS ON THE AERODYNAMICS OF VENTILATED DISC BRAKE ROTOR USING CFD by Thundil

More information

Numerical Investigation of the Effect of Excess Air and Thermal Power Variation in a Liquid Fuelled Boiler

Numerical Investigation of the Effect of Excess Air and Thermal Power Variation in a Liquid Fuelled Boiler Proceedings of the World Congress on Momentum, Heat and Mass Transfer (MHMT 16) Prague, Czech Republic April 4 5, 2016 Paper No. CSP 105 DOI: 10.11159/csp16.105 Numerical Investigation of the Effect of

More information

CONJUGATE HEAT TRANSFER ANALYSIS OF HELICAL COIL HEAT EXCHANGE USING CFD

CONJUGATE HEAT TRANSFER ANALYSIS OF HELICAL COIL HEAT EXCHANGE USING CFD CONJUGATE HEAT TRANSFER ANALYSIS OF HELICAL COIL HEAT EXCHANGE USING CFD Rudragouda R Patil 1, V Santosh Kumar 2, R Harish 3, Santosh S Ghorpade 4 1,3,4 Assistant Professor, Mechanical Department, Jayamukhi

More information

Engineering Success by Application of STAR-CCM+ for Modern Gas Turbine Design

Engineering Success by Application of STAR-CCM+ for Modern Gas Turbine Design STAR Japanese Conference 2013 December 3, Yokohama, Japan Engineering Success by Application of STAR-CCM+ for Modern Gas Turbine Design Norbert Moritz, Karsten Kusterer, René Braun, Anis Haj Ayed B&B-AGEMA

More information

THERMAL ANALYSIS OF PISTON BLOCK USING FINITE ELEMENT ANALYSIS

THERMAL ANALYSIS OF PISTON BLOCK USING FINITE ELEMENT ANALYSIS THERMAL ANALYSIS OF PISTON BLOCK USING FINITE ELEMENT ANALYSIS Pushpandra Kumar Patel 1, Vikky Kumhar 2 1 BE Student, 2 Assistant Professor Department of Mechanical Engineering, SSTC-SSGI, Junwani, Bhilai,

More information

THERMAL ANALYSIS OF HELICALLY GROOVED COIL IN A CONCENTRIC TUBE HEAT EXCHANGER

THERMAL ANALYSIS OF HELICALLY GROOVED COIL IN A CONCENTRIC TUBE HEAT EXCHANGER THERMAL ANALYSIS OF HELICALLY GROOVED COIL IN A CONCENTRIC TUBE HEAT EXCHANGER A. RESHMA P.G Scholar, Thermal Engineering, Aditya Engineering College, Surampalem M.SREENIVASA REDDY Professor, Mechanical

More information

INVESTIGATION OF HEAT TRANSFER CHARACTERISTICS OF CIRCULAR AND DIAMOND PILLARED VANE DISC BRAKE ROTOR USING CFD

INVESTIGATION OF HEAT TRANSFER CHARACTERISTICS OF CIRCULAR AND DIAMOND PILLARED VANE DISC BRAKE ROTOR USING CFD SDRP JOURNAL OF NANOTECHNOLOGY & MATERIAL SCIENCE. INVESTIGATION OF HEAT TRANSFER CHARACTERISTICS OF CIRCULAR AND DIAMOND PILLARED VANE DISC BRAKE ROTOR USING CFD Research AUTHOR: A.RAJESH JUNE 2017 1

More information

CFD Investigation of Influence of Tube Bundle Cross-Section over Pressure Drop and Heat Transfer Rate

CFD Investigation of Influence of Tube Bundle Cross-Section over Pressure Drop and Heat Transfer Rate CFD Investigation of Influence of Tube Bundle Cross-Section over Pressure Drop and Heat Transfer Rate Sandeep M, U Sathishkumar Abstract In this paper, a study of different cross section bundle arrangements

More information

DESIGN OF AUTOMOBILE S BODY SHAPE AND STUDY ON EFFECT OF AERODYNAMIC AIDS USING CFD ANALYSIS

DESIGN OF AUTOMOBILE S BODY SHAPE AND STUDY ON EFFECT OF AERODYNAMIC AIDS USING CFD ANALYSIS DESIGN OF AUTOMOBILE S BODY SHAPE AND STUDY ON EFFECT OF AERODYNAMIC AIDS USING CFD ANALYSIS Akshay S 1, Ashik Vincent 2, Athul Anand R 3, George Kurian 4, Dr. Shajan Kuriakose 5 1,2,3,4 B-Tech Degree

More information

Aerodynamic Study of the Ahmed Body in Road-Situations using Computational Fluid Dynamics

Aerodynamic Study of the Ahmed Body in Road-Situations using Computational Fluid Dynamics Aerodynamic Study of the Ahmed Body in Road-Situations using Computational Fluid Dynamics R. Manimaran Thermal and Automotive Research Group School of Mechanical and Building Sciences VIT University (Chennai

More information

CFD Analysis of Oil Cooler Duct for Turboprop Aircraft Engine in Pusher Configuration

CFD Analysis of Oil Cooler Duct for Turboprop Aircraft Engine in Pusher Configuration CFD Analysis of Oil Cooler Duct for Turboprop Aircraft Engine in Pusher Configuration Abhijeet B. Chougule 1, Vinay C A. 2, Dr. Saleel Ismail 3 M.Tech Student, SMBS, VIT University, Chennai, India 1 Scientist,

More information

Australian Journal of Basic and Applied Sciences

Australian Journal of Basic and Applied Sciences AENSI Journals Australian Journal of Basic and Applied Sciences ISSN:1991-8178 Journal home page: www.ajbasweb.com Efficient and Environmental Friendly NO x Emission Reduction Design of Aero Engine Gas

More information

Gas exchange process for IC-engines: poppet valves, valve timing and variable valve actuation

Gas exchange process for IC-engines: poppet valves, valve timing and variable valve actuation Gas exchange process for IC-engines: poppet valves, valve timing and variable valve actuation Topics Analysis of the main parameters influencing the volumetric efficiency in IC engines: - Valves and valve

More information

Programme area 4a. Fluid Energy Machines

Programme area 4a. Fluid Energy Machines Programme area 4a Fluid Energy 136 Contents: Fundamentals of Fluid Mechanics 138 Thermodynamics 140 Mechanics / Other 142 Power Engines Hydroturbines Pelton...143 Francis...144 others...145 Steam Turbines...146

More information

Chapter 7: Thermal Study of Transmission Gearbox

Chapter 7: Thermal Study of Transmission Gearbox Chapter 7: Thermal Study of Transmission Gearbox 7.1 Introduction The main objective of this chapter is to investigate the performance of automobile transmission gearbox under the influence of load, rotational

More information

FLUID FLOW. Introduction

FLUID FLOW. Introduction FLUID FLOW Introduction Fluid flow is an important part of many processes, including transporting materials from one point to another, mixing of materials, and chemical reactions. In this experiment, you

More information

Combustion Equipment. Combustion equipment for. Solid fuels Liquid fuels Gaseous fuels

Combustion Equipment. Combustion equipment for. Solid fuels Liquid fuels Gaseous fuels Combustion Equipment Combustion equipment for Solid fuels Liquid fuels Gaseous fuels Combustion equipment Each fuel type has relative advantages and disadvantages. The same is true with regard to firing

More information

Performance Calculation of Vehicle Radiator Group using CFD

Performance Calculation of Vehicle Radiator Group using CFD Performance Calculation of Vehicle Radiator Group using CFD Mr.Sonu Thomas 1, Mr.V. Karthikeyan 2,Dr.G. Nallakumarasamy 3 1 PG Scholar, Department of Mechanical Engg, Excel Engineering College, Tamilnadu

More information

FLUID DYNAMICS TRANSIENT RESPONSE SIMULATION OF A VEHICLE EQUIPPED WITH A TURBOCHARGED DIESEL ENGINE USING GT-POWER

FLUID DYNAMICS TRANSIENT RESPONSE SIMULATION OF A VEHICLE EQUIPPED WITH A TURBOCHARGED DIESEL ENGINE USING GT-POWER GT-SUITE USERS CONFERENCE FRANKFURT, OCTOBER 20 TH 2003 FLUID DYNAMICS TRANSIENT RESPONSE SIMULATION OF A VEHICLE EQUIPPED WITH A TURBOCHARGED DIESEL ENGINE USING GT-POWER TEAM OF WORK: A. GALLONE, C.

More information

IJSRD - International Journal for Scientific Research & Development Vol. 4, Issue 06, 2016 ISSN (online):

IJSRD - International Journal for Scientific Research & Development Vol. 4, Issue 06, 2016 ISSN (online): IJSRD - International Journal for Scientific Research & Development Vol. 4, Issue 06, 2016 ISSN (online): 2321-0613 Aerodynamic Drag Reduction on Vehicle with and without Spoiler Rajath. H.R 1 Mrs. Shweta

More information

Aerodynamic Drag Assessment

Aerodynamic Drag Assessment Aerodynamic Drag Assessment Computer Fluid Dynamics (CFD) analysis was used in the ULSAB-AVC Program to evaluate the aerodynamic concept from the very beginning of vehicle concepts. 11.1 BACKGROUND A vehicle

More information

Journal Online Jaringan COT POLIPD (JOJAPS) Fluid Flow Analysis of Micro Gas Turbine Using Computational Fluid Dynamics (CFD)

Journal Online Jaringan COT POLIPD (JOJAPS) Fluid Flow Analysis of Micro Gas Turbine Using Computational Fluid Dynamics (CFD) JOJAPS eissn 2504-8457 Journal Online Jaringan COT POLIPD (JOJAPS) Flow Analysis of Micro Gas Turbine Using Computational Dynamics (CFD) Eko Prasetyo, Rudi Hermawan, Angger Liyundira Putra, D.L Zariatin

More information

Motor Vehicle Engineering

Motor Vehicle Engineering Motor Vehicle Engineering 25 It deals with the design and maintenance of a motor vehicle and its accessories. The main courses in this stream are: IC Engine & Reciprocating Machine Motor Vehicle Engineering

More information

COLD PLATE SOFTWARE PROGRAM ANALYZES AIRCRAFT

COLD PLATE SOFTWARE PROGRAM ANALYZES AIRCRAFT COLD PLATE SOFTWARE PROGRAM ANALYZES AIRCRAFT DISPLAY T. Renaud Sanders, a Lockheed Martin Co. Nov, 2000 Introduction Finned heat exchangers, called cold plates, have been used for many years to cool military

More information

The hepia Moto2 Aerodynamic Program - From CFD to the Track

The hepia Moto2 Aerodynamic Program - From CFD to the Track The hepia Moto2 Aerodynamic Program - From CFD to the Track Patrick Haas, Prof. HES www.cmefe.ch SWISS UNIVERSITIES OF APPLIED SCIENCES AND ARTS hepia (Geneva) 7 Universities + 2 private 80 000 Students

More information

injection on a cold start system

injection on a cold start system CFD analysis of fuel injection on a cold start system CFD analysis of fuel injection on a cold start system Martin Kessler Regis Ataides Victor Arume de Souza Cesareo de La Rosa Siqueira Alessandro F.

More information

CFD Simulation of Dry Low Nox Turbogas Combustion System

CFD Simulation of Dry Low Nox Turbogas Combustion System CFD Simulation of Dry Low Nox Turbogas Combustion System L. Bucchieri - Engin Soft F. Turrini - Fiat Avio CFX Users Conference - Friedrichshafen June 1999 1 Objectives Develop a CFD model for turbogas

More information

Enhanced Heat Transfer Surface Development for Exterior Tube Surfaces

Enhanced Heat Transfer Surface Development for Exterior Tube Surfaces 511 A publication of CHEMICAL ENGINEERING TRANSACTIONS VOL. 32, 2013 Chief Editors: Sauro Pierucci, Jiří J. Klemeš Copyright 2013, AIDIC Servizi S.r.l., ISBN 978-88-95608-23-5; ISSN 1974-9791 The Italian

More information

A Parametric CFD Study of a Generic Pickup Truck and Rear Box Modifications

A Parametric CFD Study of a Generic Pickup Truck and Rear Box Modifications Abstract A Parametric CFD Study of a Generic Pickup Truck and Rear Box Modifications Wael Mokhtar; Md Maruf Hossain, and Samira Ishrat Jahan, School of Engineering, Grand valley State University, Grand

More information

EXPERIMENTAL INVESTIGATIONS OF DOUBLE PIPE HEAT EXCHANGER WITH TRIANGULAR BAFFLES

EXPERIMENTAL INVESTIGATIONS OF DOUBLE PIPE HEAT EXCHANGER WITH TRIANGULAR BAFFLES International Research Journal of Engineering and Technology (IRJET) e-issn: 2395-56 Volume: 3 Issue: 8 Aug-216 www.irjet.net p-issn: 2395-72 EXPERIMENTAL INVESTIGATIONS OF DOUBLE PIPE HEAT EXCHANGER WITH

More information

Comparison of Swirl, Turbulence Generating Devices in Compression ignition Engine

Comparison of Swirl, Turbulence Generating Devices in Compression ignition Engine Available online atwww.scholarsresearchlibrary.com Archives of Applied Science Research, 2016, 8 (7):31-40 (http://scholarsresearchlibrary.com/archive.html) ISSN 0975-508X CODEN (USA) AASRC9 Comparison

More information

Automation of Optimal Design of Air Preheater s Corrugated Heating Elements using CFD

Automation of Optimal Design of Air Preheater s Corrugated Heating Elements using CFD Automation of Optimal Design of Air Preheater s Corrugated Heating Elements using CFD Mousumi Roy Former faculty, Department of Mechanical Engineering CVSR Engg. College, Hyderabad., Telangana state,india

More information

CROWN WAFER NOZZLE CHECK VALVES

CROWN WAFER NOZZLE CHECK VALVES CROWN WAFER NOZZLE CHECK VALVES Leading the Way in Pipeline Technology Product Scope and Applications PRODUCT SCOPE Sizes 2-12 ASME B16.34 and API 6D, pressure classes 150-900 Valve is offered in a wafer

More information

Investigation for Flow of Cooling Air through the Ventilated Disc Brake Rotor using CFD

Investigation for Flow of Cooling Air through the Ventilated Disc Brake Rotor using CFD International Journal of Thermal Technologies E-ISSN 2277 4114 2015 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijtt/ Research Article Investigation for Flow of Cooling Air

More information

NACA Duct Another common intake is the NACA duct, which, due to its shape, has a high efficiency with little additional drag. NACA ducts, for proper

NACA Duct Another common intake is the NACA duct, which, due to its shape, has a high efficiency with little additional drag. NACA ducts, for proper AERO 101 Greetings again and welcome to the eleventh segment of Aero 101. Sorry we re a day late! Today we will talk about hood vents and internal airflow. Cooling inlets (ducts) and exits, much like the

More information

Design of a Custom Vortex generator Optimization of Vehicle Drag and Lift Characteristics

Design of a Custom Vortex generator Optimization of Vehicle Drag and Lift Characteristics Design of a Custom Vortex generator Optimization of Vehicle Drag and Lift Characteristics Naveen. S 1, Vipin Prakkash 2, Sukanth Kannan 3 1, 2, 3 Senior Engineer, Sharda Motor Industries Limited R&D, Chennai,

More information

International Journal of Scientific & Engineering Research, Volume 5, Issue 7, July-2014 ISSN

International Journal of Scientific & Engineering Research, Volume 5, Issue 7, July-2014 ISSN ISSN 9-5518 970 College of Engineering Trivandrum Department of Mechanical Engineering arundanam@gmail.com, arjunjk91@gmail.com Abstract This paper investigates the performance of a shock tube with air

More information

Vehicle Side-Window Defrosting and Demisting Process

Vehicle Side-Window Defrosting and Demisting Process Vehicle Side-Window Defrosting and Demisting Process A. Aroussi, A. Hassan Flow Diagnostics Laboratory, School of M3EM, The University of Nottingham, UK. ABSTRACT The thermal comfort of passengers within

More information

Simulation Studies on the Effect of Porous Twisted Plate Inserts on the Performance of Fire Tube Steam Packaged Boiler

Simulation Studies on the Effect of Porous Twisted Plate Inserts on the Performance of Fire Tube Steam Packaged Boiler Simulation Studies on the Effect of Porous Twisted Plate Inserts on the Performance of Fire Tube Steam Packaged Boiler S. Hassan *,a, M. K. Roslim b and R. M. Zain c Mechanical Engineering Department,

More information

SIMULIA Overview: Accelerating Innovation with Realistic Simulation

SIMULIA Overview: Accelerating Innovation with Realistic Simulation SIMULIA Overview: Accelerating Innovation with Realistic Simulation SIMULIA Overview Agenda SIMULIA Mission & Brand Position SIMULIA Product Portfolio Industry Examples Summary 2 SIMULIA Vision To Make.

More information

Porsche Engineering driving technologies

Porsche Engineering driving technologies European GT-Suite User Conference 2016 Frankfurt am Main, 17. Oktober 2016 Real Drive Efficiency Improvement in turbocharged Engines by the use of Expansion Intake Manifold Content > Introduction Motivation

More information

Numerical Simulation of Gas Turbine Can Combustor Engine

Numerical Simulation of Gas Turbine Can Combustor Engine Numerical Simulation of Gas Turbine Can Combustor Engine CH UMAMAHESHWAR PRAVEEN 1*, A HEMANTH KUMAR YADAV 2 1. Engineer, CDG BOEING Company, Chennai, India. 2. B.Tech Aeronautical Engineer 2012 passout,

More information

Aguk Zuhdi Muhammad Fathallah 1, Wolfgang Busse 2, Fadhil Rizki Clausthaldi 3

Aguk Zuhdi Muhammad Fathallah 1, Wolfgang Busse 2, Fadhil Rizki Clausthaldi 3 (pissn: 2541-5972, eissn: 2548-1479) 39 Fluid Flow Analysis of Jacket Cooling System for Marine Diesel Engine 93 KW Aguk Zuhdi Muhammad Fathallah 1, Wolfgang Busse 2, Fadhil Rizki Clausthaldi 3 Abstract

More information

Aerodynamic Characteristics of Sedan with the Rolling Road Ground Effect Simulation System

Aerodynamic Characteristics of Sedan with the Rolling Road Ground Effect Simulation System Vehicle Engineering (VE) Volume 2, 2014 www.seipub.org/ve Aerodynamic Characteristics of Sedan with the Rolling Road Ground Effect Simulation System Yingchao Zhang 1, Linlin Ren 1, Kecheng Pan 2, Zhe Zhang*

More information

FLOW AND HEAT TRANSFER ENHANCEMENT AROUND STAGGERED TUBES USING RECTANGULAR VORTEX GENERATORS

FLOW AND HEAT TRANSFER ENHANCEMENT AROUND STAGGERED TUBES USING RECTANGULAR VORTEX GENERATORS FLOW AND HEAT TRANSFER ENHANCEMENT AROUND STAGGERED TUBES USING RECTANGULAR VORTEX GENERATORS Prabowo, Melvin Emil S., Nanang R. and Rizki Anggiansyah Department of Mechanical Engineering, ITS Surabaya,

More information

CFD analysis of heat transfer enhancement in helical coil heat exchanger by varying helix angle

CFD analysis of heat transfer enhancement in helical coil heat exchanger by varying helix angle CFD analysis of heat transfer enhancement in helical coil heat exchanger by varying helix 1 Saket A Patel, 2 Hiren T Patel 1 M.E. Student, 2 Assistant Professor 1 Mechanical Engineering Department, 1 Mahatma

More information

Effect of Air-Dam on Low End Passenger Cars

Effect of Air-Dam on Low End Passenger Cars Effect of Air-Dam on Low End Passenger Cars Abhinav Damle 1, Amitkumar Magdum 1, Isha Tikekar 1 1 DepartmentofAutomotiveEngineering,SchoolofMechanicalEngineering,VITUniversity,Vellore, TamilNadu,India,632014

More information

The use of CFD at hepia The Swiss Team Moto2 fastest of the World Championship

The use of CFD at hepia The Swiss Team Moto2 fastest of the World Championship The use of CFD at hepia The Swiss Team Moto2 fastest of the World Championship Patrick Haas, Prof. HES Mechanical Engineering www.cmefe.ch MOTORSPORTS AT HEPIA Egli Motorradtechnik (1985) Bachelor thesis

More information

Development Summary 2013 Scion FR-S by AEM Induction

Development Summary 2013 Scion FR-S by AEM Induction Development Summary 2013 Scion FR-S by AEM Induction On the way to SEMA 2012 This is no show queen. We drive/race what we build. Trailers are for wimps. The all-new 2013 Scion FR-S combines Subaru s newly

More information

STUDY OF NOZZLE INJECTOR PERFORMANCE USING CFD

STUDY OF NOZZLE INJECTOR PERFORMANCE USING CFD STUDY OF NOZZLE INJECTOR PERFORMANCE USING CFD Vimal Kumar Pathak 1 and Sumit Gupta 2 1,2 Department of Mechanical Engineering, MNIT, Jaipur ABSTRACT The aim of this paper is to study the performance of

More information

PROJECT PORTFOLIO. A list of projects completed by Sukra Helitek and their briefs Sukra Helitek 1 P a g e 33

PROJECT PORTFOLIO. A list of projects completed by Sukra Helitek and their briefs Sukra Helitek 1 P a g e 33 PROJECT PORTFOLIO A list of projects completed by Sukra Helitek and their briefs 2017 Sukra Helitek 1 P a g e 33 contact@sukra-helitek.com OUR VALUABLE CUSTOMERS 2017 Sukra Helitek 2 P a g e 33 contact@sukra-helitek.com

More information

DESIGN OPTIMIZATION OF INDUSTRIAL STEAM VENT SILENCER FOR BETTER FLOW PROCESS AND NOISE REDUCTION BY CFD AND SIDLAB SIMULATION

DESIGN OPTIMIZATION OF INDUSTRIAL STEAM VENT SILENCER FOR BETTER FLOW PROCESS AND NOISE REDUCTION BY CFD AND SIDLAB SIMULATION DESIGN OPTIMIZATION OF INDUSTRIAL STEAM VENT SILENCER FOR BETTER FLOW PROCESS AND NOISE REDUCTION BY CFD AND SIDLAB SIMULATION Shahid Nadeem #1,, K.S.Shashishekar #2, #1. M.Tech student (Thermal Power

More information

Designing & Validating a New Intake Manifold for a Formula SAE Car

Designing & Validating a New Intake Manifold for a Formula SAE Car Designing & Validating a New Intake Manifold for a Formula SAE Car Arpit Singhal 1 1 (M.Tech (Computational Fluid Dynamics) University of Petroleum &Energy Studies, India Abstract This paper gives the

More information

2008 International ANSYS Conference

2008 International ANSYS Conference 2008 International ANSYS Conference NUMERICAL OPTIMIZATION UTILIZING FLUID, THERMAL AND STRUCTURAL MODELING OF THE 155 MM NLOS-C MUZZLE BRAKE Robert Carson RDECOM/ARDEC/WSEC Benet Labs Jeffrey Greer RDECOM/ARDEC/WSEC

More information

CFD on Cavitation around Marine Propellers with Energy-Saving Devices

CFD on Cavitation around Marine Propellers with Energy-Saving Devices 63 CFD on Cavitation around Marine Propellers with Energy-Saving Devices CHIHARU KAWAKITA *1 REIKO TAKASHIMA *2 KEI SATO *2 Mitsubishi Heavy Industries, Ltd. (MHI) has developed energy-saving devices that

More information

Cross Flow Heat Exchanger H352

Cross Flow Heat Exchanger H352 Cross Flow Heat Exchanger H352 H352 Shown With Optional Plain Tube of H352A fitted. Allows Investigation Of Plain And Finned Cross Flow Heat Exchangers. Expandable Free & Forced Convection Heat Transfer

More information

COMPUTATIONAL FLOW MODEL OF WESTFALL'S 2900 MIXER TO BE USED BY CNRL FOR BITUMEN VISCOSITY CONTROL Report R0. By Kimbal A.

COMPUTATIONAL FLOW MODEL OF WESTFALL'S 2900 MIXER TO BE USED BY CNRL FOR BITUMEN VISCOSITY CONTROL Report R0. By Kimbal A. COMPUTATIONAL FLOW MODEL OF WESTFALL'S 2900 MIXER TO BE USED BY CNRL FOR BITUMEN VISCOSITY CONTROL Report 412509-1R0 By Kimbal A. Hall, PE Submitted to: WESTFALL MANUFACTURING COMPANY May 2012 ALDEN RESEARCH

More information

IMPROVING BOILER COMBUSTION USING COMPUTATIONAL FLUID DYNAMICS MODELLING

IMPROVING BOILER COMBUSTION USING COMPUTATIONAL FLUID DYNAMICS MODELLING REFEREED PAPER IMPROVING BOILER COMBUSTION USING COMPUTATIONAL FLUID DYNAMICS MODELLING VAN DER MERWE SW AND DU TOIT P John Thompson, Sacks Circle, Bellville South, 7530, South Africa schalkv@johnthompson.co.za

More information

Validation and Optimization of Front End Cooling Module for Commercial Vehicle using CFD Simulation

Validation and Optimization of Front End Cooling Module for Commercial Vehicle using CFD Simulation Validation and Optimization of Front End Cooling Module for Commercial Vehicle using CFD Simulation Ashok Patidar, Umashanker Gupta, Nitin Marathe VE Commercial Vehicles Ltd. INDIA (A VOLVO GROUP AND EICHER

More information

Exhaust line simulations using Star-CCM+ and automation Yohann Perrot

Exhaust line simulations using Star-CCM+ and automation Yohann Perrot Exhaust line simulations using Star-CCM+ and automation Yohann Perrot 22-March-2010 Agenda Faurecia Emissions Control Technologies Exhaust line components Some correlations and investigations Enhancements

More information

Analysis of Exhaust System using AcuSolve

Analysis of Exhaust System using AcuSolve Analysis of Exhaust System using AcuSolve Abbreviations: CFD (Computational Fluid Dynamics), EBP (Exhaust Back Pressure), RANS (Reynolds Averaged Navier Stokes), Spalart Allmaras (SA), UI (Uniformity Index)

More information

Cross Flow Heat Exchanger H352

Cross Flow Heat Exchanger H352 Cross Flow Heat Exchanger H352 H352 Cross Flow Heat Exchanger Shown With Optional Plain Tube of H352A fitted. Allows Investigation Of Plain And Finned Cross Flow Heat Exchangers. Expandable Free & Forced

More information

Integrated 1D-MultiD Fluid Dynamic Models for the Simulation of I.C.E. Intake and Exhaust Systems

Integrated 1D-MultiD Fluid Dynamic Models for the Simulation of I.C.E. Intake and Exhaust Systems Integrated -MultiD Fluid Dynamic Models for the Simulation of I.C.E. Intake and Exhaust Systems G. Montenegro, A. Onorati, F. Piscaglia, G. D Errico Politecnico di Milano, Dipartimento di Energetica, Italy

More information

Fluid Structure Interaction Simulation of Hood Flutter

Fluid Structure Interaction Simulation of Hood Flutter Fluid Structure Interaction Simulation of Hood Flutter James Dilworth, Ben Ashby, Peter Young Arup Abstract Fluid structure interaction problems appear in a wide range of industries, including automotive,

More information

Effect of Stator Shape on the Performance of Torque Converter

Effect of Stator Shape on the Performance of Torque Converter 16 th International Conference on AEROSPACE SCIENCES & AVIATION TECHNOLOGY, ASAT - 16 May 26-28, 2015, E-Mail: asat@mtc.edu.eg Military Technical College, Kobry Elkobbah, Cairo, Egypt Tel : +(202) 24025292

More information

Numerical Simulation of the Thermoelectric Model on Vehicle Turbocharged Diesel Engine Intercooler

Numerical Simulation of the Thermoelectric Model on Vehicle Turbocharged Diesel Engine Intercooler Research Journal of Applied Sciences, Engineering and Technology 6(16): 3054-3059, 013 ISSN: 040-7459; e-issn: 040-7467 Maxwell Scientific Organization, 013 Submitted: January 1, 013 Accepted: January

More information

Coupling of SERPENT and OpenFOAM for MSR analysis

Coupling of SERPENT and OpenFOAM for MSR analysis Coupling of SERPENT and OpenFOAM for MSR analysis Olga Negri Supervisor Prof. Tim Abram, University of Manchester Co-supervisor Dr. Hywel Owen, University of Manchester Industrial supervisor Steve Curr,

More information

1. Aero-Science B.Sc. Aero Science-I Total Mark: 100 Appendix A (Outlines of Tests) Aero-Engines : 100 Marks

1. Aero-Science B.Sc. Aero Science-I Total Mark: 100 Appendix A (Outlines of Tests) Aero-Engines : 100 Marks 1. Aero-Science B.Sc. Aero Science-I Total Mark: 100 Appendix A (Outlines of Tests) Aero-Engines : 100 Marks Note:- The questions will be set in each paper. Candidates are to attempt any five except in

More information

Simulating Systems in Ground Vehicle Design Frederick J. Ross Director, Ground Transportation

Simulating Systems in Ground Vehicle Design Frederick J. Ross Director, Ground Transportation Simulating Systems in Ground Vehicle Design Frederick J. Ross Director, Ground Transportation Agenda: Simulating Systems Maturity of Simulation Growing from validation to virtual simulation Simulating

More information

Aircraft Propulsion Technology

Aircraft Propulsion Technology Unit 90: Aircraft Propulsion Technology Unit code: L/601/7249 QCF level: 4 Credit value: 15 Aim This unit aims to develop learners understanding of the principles and laws of aircraft propulsion and their

More information

Applied Fluid Mechanics

Applied Fluid Mechanics Applied Fluid Mechanics 1. The Nature of Fluid and the Study of Fluid Mechanics 2. Viscosity of Fluid 3. Pressure Measurement 4. Forces Due to Static Fluid 5. Buoyancy and Stability 6. Flow of Fluid and

More information

Influence of Cylinder Bore Volume on Pressure Pulsations in a Hermetic Reciprocating Compressor

Influence of Cylinder Bore Volume on Pressure Pulsations in a Hermetic Reciprocating Compressor Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2014 Influence of Cylinder Bore Volume on Pressure Pulsations in a Hermetic Reciprocating

More information

Sports Car Brake Cooling Simulation with CAD-Embedded CFD

Sports Car Brake Cooling Simulation with CAD-Embedded CFD Automotive Sports Car Brake Cooling Simulation with CAD-Embedded CFD By Mike Gruetzmacher, FloEFD Product Specialist, Mentor Graphics B rake cooling is a crucial area in motorsport and sports car engineering.

More information

Computational Fluid Dynamics in Torque Converters: Validation and Application

Computational Fluid Dynamics in Torque Converters: Validation and Application Rotating Machinery, 9: 411 418, 2003 Copyright c Taylor & Francis Inc. ISSN: 1023-621X print DOI: 10.1080/10236210390241646 Computational Fluid Dynamics in Torque Converters: Validation and Application

More information

Effect of Helix Parameter Modification on Flow Characteristics of CIDI Diesel Engine Helical Intake Port

Effect of Helix Parameter Modification on Flow Characteristics of CIDI Diesel Engine Helical Intake Port Effect of Helix Parameter Modification on Flow Characteristics of CIDI Diesel Engine Helical Intake Port Kunjan Sanadhya, N. P. Gokhale, B.S. Deshmukh, M.N. Kumar, D.B. Hulwan Kirloskar Oil Engines Ltd.,

More information

Design and Performance Analysis of Louvered Fin Automotive Radiator using CAE Tools

Design and Performance Analysis of Louvered Fin Automotive Radiator using CAE Tools Design and Performance Analysis of Louvered Fin Automotive Radiator using CAE Tools Vishwa Deepak Dwivedi Scholar of Master of Technology, Mechanical Engineering Department, UCER, Allahabad, India Ranjeet

More information