UIC- ERTMS Conference 2004

Transcription

1 UIC- ERTMS Conference 2004 Managing the Migration Rome 15 th 17 th December 2004 ETCS TESTS RESULTS Dr. Jorge Ignacio Iglesias. Director of the Rail Interoperability Laboratory (LIF) at CEDEX

2 1. Interoperability in Spain. 2. ETCS Test Results. SUMMARY 2.1 Eurobalise Tests at LIF: European Eurobalise test campaing. 2.2 EVC Tests at LIF: European EVC Test and debugging campaign. 2.3 ETCS Tests on the track: Madrid-Lérida HSL. 3. Conclusions

3 1. Interoperability in Spain 1. Spain has one of the most ambitious program in new HSL equipped with ERTMS: 2.1 Madrid-Lérida HSL: ERTMS L1-L2 line. In commercial operation with ASFA (200Km/h).Trackside from Ansaldo-CSEE. Current situation: L1 tests on the line. 2.2 Lérida-Barcelona HSL: ERTMS L1-L2. Trackside from Alcatel/Siemens/Invensys. Current situation: under construction. 2.3 Segovia-Valladolid HSL: ERTMS L1-L2. Trackside from Alcatel/Siemens/Invensys. Current situation: under construction. 2.4 Madrid-Toledo HSL: ERTMS L1-L2. Trackside from Alcatel/Siemens/Invensys. Current situation: under construction. 2.5 Córdoba-Malaga HSL: ERTMS L1-L2. Trackside from Alcatel/Invensys. Current situation: recently granted. 2.6 Albacete-Villar de Chinchilla: Pilot Line. ERTMS L1-L2. Trackside from Bombardier/Invensys. Current situation: finished 2.7 Zaragoza-Huesca line: ERTMS L1. Trackside from Alstom. Current situation: under construction. 2.8 Rolling stock equipped with almost all the EVCs suppliers.

4 ADMINISTRACIÓN CEDEX Laboratory Certification MINISTERIO ADAF harmonisation DE FOMENTO Notified Body Spanish Project Environment CEDEX Laboratory INFRAESTRUCTURA RENFE Infrastructure GIF Infrastructure ALSTOM Zarag. Huesca Level 1 BOMBARDIER INVENSYS Pilot Line Level 1 Bombardier/Invensys Level 2 Invensys ANSALDO Madrid Lérida Level 1 Level 2 ALCATEL / SIEMENS INVENSYS / INDRA Lérida - Barcelona Level 1 Level 2 ALCATEL / SIEMENS INVENSYS / INDRA Toledo Access Level 1 Level 2 ALCATEL / SIEMENS INVENSYS / INDRA Segovia Valladolid Level 1 Level 2 MATERIAL RODANTE RENFE Rolling Stock BOMBARDIER INVENSYS Pilot Line ALSTOM/CAF TAV S-104 TALGO High speed SIEMENS ICE-350 CAF/ALSTOM Variable gauge RENFE AVE TAV S-100 ALSTOM/SIEMENS 252 FIAT ALARIS SIEMENS 252 ALSTOM ETCS Alstom STM-LZB Alcatel/Siemens ASFA Invensys SIEMENS ETCS Siemens STM-LZB Alcatel/Siemens ASFA Invensys SIEMENS ETCS Siemens STM-LZB Alcatel/Siemens ASFA Invensys Bombardier ETCS Bombardir STM-LZB Alcatel/Siemens STM-Ebicab Bombardier ASFA Invensys ALSTOM ETCS Alstom LZB Siemens ASFA Invensys ANSALDO ETCS Ansaldo LZB Siemens ASFA Invensys Level 1 ETCS Bombardier Invensys Level 2 Invensys STM-Ebicab Invensys ASFA Invensys

5 2.ETCS Test Results. 2.1 Eurobalise Tests at LIF: European Eurobalise Test Campaign. 2.2 EVC Tests at LIF: European EVC Test and Debugging Campaign. 2.3 Tests on the track: Madrid-Lérida HSL.

6 2.1 Eurobalise Tests at LIF: European Eurobalise Test Campaign. 1. Main Objectives Consolidation of the Eurobalise Specs (Subsets 036 and 085). Status of the development of the products (Eurobalises, Antennas and BTMs) and their compliance with the Specs. Upgrade and evaluation of the test tools Creation of an Independent and Reference Lab Preparation for the certification process

7 2.1 Eurobalise Tests at LIF: European Eurobalise Test Campaign. 2. Participants EEIG Users Group. UNISIG Companies: Alstom, Ansaldo, Bombardier and Siemens Notified Bodies: ADAF, Certifer, EBC, RFI, Railcert, AEA Technology. CEDEX: Eurobalise Laboratory

8 2.1 Eurobalise Tests at LIF: European Eurobalise Test Campaign. 3. Organization and Calendar Calibrations (2003) Tests of Balises (2003) Tests of On-board (Antenna-BTM) (first half 2004) Interoperability Tests (second half 2004)

9 Eurobalise-BTM tests Eurobalise Test Specifications TSI UNISIG Subset 036 UNISIG Subset 085 V2.2.1 (Sept 2003) V2.1.2 (Sept2003) Test Specifications for FFFIS for Eurobalise Eurobalise FFFIS Testing Procedures Test Bench Architecture Balise Tests Imperfections in SUBSET-085 of issue (May 2005) BTM Tests UNISIG Test Specs review

10 Eurobalise-BTM tests Eurobalise Test Specifications TSI UNISIG Subset 036 UNISIG Subset 085 V2.2.1 (Sept 2003) V2.1.2 Specs (Sept2003) OK Test Specifications for FFFIS for Eurobalise Eurobalise FFFIS Balise Tests OK Conform Balise OK Conform BTM Testing Procedures Test Bench Architecture BTM Tests OK Not in TSI UNISIG Subset 095 V0.0.5 Eurobalise Airg-gap Interoperability Demonstration

11 Eurobalise-BTM tests Eurobalise Test Specifications TSI UNISIG Subset 036 UNISIG Subset 085 V2.2.1 (Sept 2003) V2.1.2 Specs (Sept2003) shall be Test Specifications for FFFIS for Eurobalise reviewed! Eurobalise FFFIS Balise Tests OK Conform Balise OK Conform BTM Testing Procedures Test Bench Architecture BTM Tests Not OK Not in TSI UNISIG Subset 095 V0.0.5 Eurobalise Airg-gap Interoperability Demonstration

12 Eurobalise-BTM tests Calibrations general Set-up Test Antenna TELE-POWERING (27Mhz) UP-LINK (4.23Mhz) TOOLS Reference Loop

13 Eurobalise-BTM tests Balise Tests general Set-up Test Antenna TELE-POWERING (27Mhz) UP-LINK (4.23Mhz) TOOLS Balise

14 Eurobalise-BTM tests Antenna-BTM Tests general Set-up Antenna-BTM TELE-POWERING (27Mhz) UP-LINK (4.23Mhz) TOOLS Reference Loop

15 Eurobalise-BTM tests Interoperability Tests general Set-up Antenna-BTM Company 1 TELE-POWERING (27Mhz) UP-LINK (4.23Mhz) TOOLS Balise Company 2

16 Eurobalise-BTM tests List of Tests performed during the campaign Tests of Balises Balise Up-link Field Conformity Measurements Balise Tele-powering Field Conformity Measurements Input/Output Characteristics Up-link Signal Characteristics Interface C performance measurements Balise Impedance Cross-talk measurements Debris conditions:free-air, clear water, Salt water, iron ore, metallic plate

17 List of Tests performed during the campaign Tests of On-board Evaluation of Tele-powering Radiation Pattern Evaluation of Up-link Radiation Pattern Creation of Signal Pattern for Dynamic Tests Transmission Tests Interoperability Tests Longest Uninterrupted Contact Distance (Subset-095, 7.1) in Free Air, Clear Water, Salt Water, Metallic Plate 1 and Metallic Plate 2 Cross-talk, One Antenna - One balise (Subset-095, 7.6) (only in Free Air) Each Antenna-BTM with the four balises.

18 Calibration Tests

19 Tested Balises from the four manufacturers (ANS, BTS, ALS, SIE)

20 Debris Box filling-up for the Balise Clear-Water Tests Preparation for the Reference Loop Calibration under clear water debris

21 Balise Test under the Metallic- Plate Debris Condition Testing on the Balise under Iron-Ore Debris condition

22 Interoperability Tests under salt water debris condition

23 Eurobalise Tests at LIF: Conclusions All the existing eurobalises and BTMs have been tested during the campaign. Some of the tested equipments are not fully compliant with the specs. The related suppliers have started the development of a new product. After analysing the interoperability demonstration tests, it can be assured the goodness of the specs: 1) All the compliant Balises and BTMs are interoperable. 2) When Specsa OK! constituent is not fully compliant some interoperability tests have failed. Notify Bodies have participated in an active way in order to know the correct way of certifying balises and BTMs. LIF has demonstrated his ability to perform this certification tests.

24 2.2 Eurocab Tests at LIF: European EVC Test and Debugging Campaign. 1. Main Objectives 1. Harmonisation and consolidation of the SRS interpretations adopted by each company. 2. Debugging of the On Board Unit Test Sequences ( Subset 076) in a neutral Lab (LIF-CEDEX). 3. Definition of all needed interfaces for testing EVCs 4. Debugging and validation of CEDEX- Eurocab Lab tools. 5. Participation of the NoBos to know the way of testing an EVC for certification. 6. DMI harmonisation.

25 2.2 Eurocab Tests at LIF: European EVC Test and Debugging Campaign. EEIG Users Group. 2. Participants UNISIG Companies: Alstom, Ansaldo, Bombardier, Invensys and Siemens Notified Bodies: They will start to participate in February CEDEX: Eurocab Laboratory

26 2.2 Eurocab Tests at LIF: European EVC Test and Debugging Campaign. 3. Organization and Calendar Unisig L1 Tests with Ansaldo, Alstom, Invensys and Siemens EVCs (January-June 2004). In this period also tests based on the Madrid-Lérida line have been executed at LIF Unisig L2 Tests with Ansaldo, Alstom, Invensys and Siemens EVCs (July- December 2004) Test with Bombardier (January 2005) Official tests with Notify Bodies (February-April 2005)

27 UNISIG On-Board Unit Test Specifications TSI UNISIG Subset 026 System Requirement Specifications (SRS) UNISIG UNISIG Subset v1.0.0 June 2003 Subset 076 v2.2.1 Junio 2003 System Test Specifications On Board Test Bench Architecture Procedures (Test Sequences) Test Sequences are under UNISIG review. To be finished by March 2005 L0-L1 L1 L0-L1 L1-L2L2

28 TEST SPECIFICATIONS WRITING-DOWN PROCEDURE SRS (Subset-026) FEATURE LIST (Subset ) TEST CASES (Subset ) Traceability to the S.R.S ( ) TEST SUB-SEQUENCE CREATION ( ) DATABASE MANAGER TOOL TEST FRAMES Subset Ms Access DATABASE (TC and TSS) ( ) Definition of a procedure to concatenate TSS TEST SEQUENCE WIZARD TOOL TEST SEQUENCE CREATION (Simple List of TSS and TC s) TEST SEQUENCE ( ) Electronic format (appropriate for Lab) TEST SEQUENCES ( ) Ms Word format (Official Output) Automatic Test Case Coverage analysis ( )

29 LIF EUROCAB ARCHITECTURE JRU VIEWER ETCS LEVEL STM TRACKSIDE SIMULATOR LSTMTS STM CODING & COMMUNICATION STMCC EUROLOOP SIGNAL GENERATOR LSG JRU DOWNLOAD EVALUATION MODULE DEM FFFIS FFFIS FFFIS JRU STM LOOP DRIVER OR EMULATOR DMI ON BOARD INDUSTRIAL EQUIPMENT FFFIS BTM EUROBALISE SIGNAL GENERATOR BSG DMI EVENT RECORDER DER ODO TIU EURORADIO SPEE D TIU Signals FFFIS (wired) EURORADIO COM. SIMULATOR RCS DMI Input tool ODO ADAPTOR TIU ADAPTOR ADAPTOR FFFIS ADAPTOR FFFIS SPEED SENSOR SIMULATOR SSS TIU SIMULATOR TIUS TRAIN MOTION SIMULATOR TMS SCENARIO GENERATOR SG DATA EXCHANGE TRIP ANALYSIS & VALIDATION TAV ETCS L1 TRACKSIDE SIMULATOR L1TS MODULE EVENT RECORDER MER ETCS L2 TRACKSIDE SIMULATOR L2TS Implemented Future SCENARIO CONTROLLER SC UNISIG Test Sequence Data Base (Subset ) Test Sequence Wizard (TSW) Air transmission EVC under test

30 LIF Eurocab Laboratory

31 Test execution at eurocab Lab

32 Eurobalise interface at LIF- Eurocab Lab.

33 A Test Sequence is evaluated by analysing the data from: DMI JRU TIU (SB or EB application, main swith,pantograph pantograph...) All the events generated by the laboratory (radio or Balise messages) All these events are recorded in the TER(trip event recorder) tool All these data are automatically evaluated by the Trip Validation Tool (TAV)

34 LIF EUROCAB ARCHITECTURE JRU VIEWER ETCS LEVEL STM TRACKSIDE SIMULATOR LSTMTS STM CODING & COMMUNICATION STMCC EUROLOOP SIGNAL GENERATOR LSG JRU DOWNLOAD EVALUATION MODULE DEM FFFIS FFFIS FFFIS JRU STM LOOP DRIVER OR EMULATOR DMI ON BOARD INDUSTRIAL EQUIPMENT FFFIS BTM EUROBALISE SIGNAL GENERATOR BSG DMI EVENT RECORDER DER ODO TIU EURORADIO SPEE D TIU Signals FFFIS (wired) EURORADIO COM. SIMULATOR RCS DMI Input tool ODO ADAPTOR TIU ADAPTOR ADAPTOR FFFIS ADAPTOR FFFIS SPEED SENSOR SIMULATOR SSS TIU SIMULATOR TIUS TRAIN MOTION SIMULATOR TMS SCENARIO GENERATOR SG DATA EXCHANGE TRIP ANALYSIS & VALIDATION TAV ETCS L1 TRACKSIDE SIMULATOR L1TS MODULE EVENT RECORDER MER ETCS L2 TRACKSIDE SIMULATOR L2TS Implemented Future SCENARIO CONTROLLER SC UNISIG Test Sequence Data Base (Subset ) Air transmission Test Sequence Wizard (TSW) EVC under test

35 2.2 EVC Tests at LIF : First conclusions. 1. Remarkable differences among the DMIs from various companies: : Different menus, presentation and messages 2. Divergent SRS interpretations (already reported to each company and started to be solved during a UNISIG common meeting (Nov 30 th 2004). 3. EVC malfunctioning. Wrong implementation of some requirements. 4. L2 tests were interrupted due to different implementations of the Euroradio protocol. After a common UNISIG agreement (October 2004) tests were restarted. LIF staff have checked the conformity of all EVCs with the common interpretation. 5. Differences in messages stored in the JRU (JRU Unisig WG is already working with CEDEX staff to solve the inconsistencies found in the JRUspecs ).

36 DMI Harmonization 1. A document showing the main differences among the DMIs were generated by CEDEX staff. 2. This document compares each specific implementation with the DMI document distributed by the Users Group (Operational DMI Information. May 2004). 3. An Spanish group led by RENFE (with CEDEX participation) have written down a proposal trying to harmonize the most significant differences observed during the EVC Test campaign. 4. This proposal was presented in Madrid on October 28 th 2004 to the ERTMS Users Group and CENELEC DMI group. It is a first step in the way of harmonizing the DMI.

37 2.3 ETCS Tests on the track: Madrid-Lérida HSL.

38 2.3 ETCS Tests on the track: Madrid-Lérida HSL. ERTMS Tests at Madrid-Lérida HSL are being performed from June 2003 with Talgo-BTS(Siemens EVC), Alstom and Ansaldo trains. CEDEX is participating on behalf of RENFE in the independent evaluation of the tests. Some of the test scenarios were run first at LIF-Eurocab lab. Different specs interpretations appeared during these tests were solved before going to the real track. Test are evaluated both by analysing the data downloaded from the JRU ( by means of the tool developed at LIF) and also by the recording from the DMI. The behaviour of the tested EVCs is good enough. Real interoperability is being tested.

39 3.- General Conclusions I 1. CEDEX is the first neutral and independent laboratory able to perform interoperability tests among all the European suppliers. 2. LIF is currently performing tests on Eurobalises, Antenna+BTM and EVCs from all the European suppliers. 3. These test campaigns, supported by the ERTMS Users Group, are solving different interpretations of the specifications adopted by each UNISIG company. 4. ETCS tests at LIF have helped to consolidate the Eurobalise Specs(036 and 085). It is the first time that Unisig System Test Specs(076) have been run in a neutral Lab.

40 3.- General Conclusions II 5. The existence of neutral forums as LIF is becoming quite important to assure the convergence among the different companies during the process of ERTMS consolidation. 6. It has been shown the importance of reproducing a real line in the lab before testing on the track. The later good behaviour of the EVCs on the track has demonstrated that real interoperability can be achieved faster by performing these lab tests. 7. The existence of neutral and reference labs as LIF should be extended to other European countries. 8. Notify Bodies should use these neutral labs to perform the certification tests for all the ERTMS constituents and subsystems.