Motor Reverser. Catalog
|
|
- Bernadette Sparks
- 5 years ago
- Views:
Transcription
1 Catalog JK JAKI
2 JK Motor Reverser Introduction Overview & Description 2 3 Technical specification 4 Thermal curves 5 Selection 7 Installation 8 Dimension 10 Certificate 12 JK 1
3 JK solid state relays - the motor is reversed by the CE international certification. Replace the inverter and the electromagnetic switch and do the control of the forward and reversed. Built-in mutual protection function lock, NO / OFF times of up to 1min/60times. Voltage 220 ~ 440VAC, the maximum capacity of 7.5KW. Easy One of the most important features of any electrical device is that it is easy to set up and easy to use. The JK motor reversed is easy installation: three-phase line input and three-phase line output. Reliable The JK motor reverser is not only designed to ensure an exceptional reliability. It has also been equipped with features to ensure that the whole operation is kept reliable. Built-in interlock protection device. If at this stage forward state, the input reversal signal, this product will maintain forward state. This is the interlock protection device. Efficient Knowing what the customer want, it has been possible to design a motor reverser that really fulfils the needs of the customers, without adding unwanted complexity. This gives excellent value for money makes the motor reverser a very efficient choice. Protect Built-in interlock protection device. 2 JKwww.jaki.com.tw
4 JK Motor Reverser Overview Modular design with a standard leading wire. The JK motor reverser is compact and easy to install. It was designed to meet EN , EN EN and EN the intern-ationally accepted standard definingsoft starts, and carries the following agency approvals: CE. Page.12 Description Control three phases of the AC voltage supplying the motor to forward and reversed. Have motor power ratings of 0.75 to 7.5 KW, three-phase have a motor voltage range of 208 to 220V, 380 to 440V. They are equipped with: Forward LED light (1) Reversal LED light(2) Forward contact (3) Connection contact (4) Reversal contact (5) AC: 180~265VAC DC: 10~32VDC (6) FWR REV Forward Reverse (F) INPUT (C) (R) 180VAC ~ 265VAC L1/R 3W F/R SSR xxxv xxxkw JKxxxxxxxx S/N:xxxxxxx T1/U L2/S L1 T1 T2/V L2 L3 T2T3 L3/T T3/W JK 3
5 Technical specification Main power: Starting model: Working frequency: Peak pressure: Isolation resistance: Strength of press-resisted: Temperature of working: Max. relative humidity : 208~220 VAC/ 380~440 VAC± 10% AC control, DC control 50 ~ 60 Hz ± 5 % 600V or 1200V ~ 1600 VAC Over 20M Ω (power & external cover). Over 20M Ω(input signal & external cover). 2500VAC/1min between power & external cover. 1000VAC/1min between power & input signal. -40C ~+100 C 93% without water drop concealed. Control Control voltage range: Control current range: Release voltage: Display LED: Protection against simultaneous controls: Maximum reverse voltage: Output signal: Reversing time: Uc Ic Ur Urv AC180~265V, DC:10-32V 15~25mA DC 6VDC Yes Yes 30V no output fixed 70ms Input-output characteristics(at20 C) Input-output Output-case Rated impulse voltage: Ui Ui Uimp 3300 VRMS 3000 VRMS 4000 V General characteristics Weight: Storage temperature range: Operating temperature range: Sortie/ Output Standard mains voltage: Mains voltage range: Non-repetitive maximum peak voltage: Max. nom. current(ac53a-ac3)@40 C: 3 pole power motor (3x400VAC): Max Direct voltage drop (@le): Non repetitive overload current: (@1cycle of 10ms) Melting limit (choice of fuse)@10ms: Minimum load current: Power factor (@le): Turn on time-reversing time(@50hz): Turn off time (@50Hz): Maximum leakage current (@Ue/50Hz): dv/dt/max off state voltage rise: Operating frequency range: Ue Un Up Ie Pn Ud ITSM I²t Imin Pf ton/trv toff Ilk dv/dt f 130g -40~+100 C -40~+100 C 400VAC VAC 1600V 16A 7.5KW 1.4VRMS 1000A 5000A²s 100mA 0 up to 1 20ms / 100ms 10ms 5mARMS 500 / µs 25 up to 440Hz 4 JKwww.jaki.com.tw
6 Thermal curves: Total wasted power (W) RMS load current (A) JK 5
7 surge current: Itsm (Apeak)=f(t) for 75A models with Itsm =1000A 1500 Itsm (Apeak) t (s) 1. No repetitive Itsm is given without voltage reapplied for the determination of the protection. 2. Repetitive Itsm is given for inrush current with initial Tj = 70 C. The repetition of the surge current decrease the lifetime SSR s. Cautions: Semiconductor relays don't provide and galvanic insulation between the load and the mains. 6 JKwww.jaki.com.tw
8
9 Installation: Note: 1. R1: Closed is forward(fwr). 2. R2: Closed is reversal(rev). 3. If "R1" is in the closed state (forward state), "R2" by adding the signal contact, then "JK reversal" will not reverse the action, which is interlocked protection functions. 4. Please install the high speed fuse additional on R and S phase side. R S T L1 L2 L3 T1 T2 T3 Three Phase Source Voltage NFB High Speed Fuse AC Control Input:180~265VAC FWR REV Forward Reverse (F) (C) INPUT 180VAC 265VAC L1/R L2/S L3/T ~ 0V (R) 3W F/R SSR xxxv xxxkw JKxxxxxxxx S/N:xxxxxxx L1 L2 L3 T1 T2T3 T1/U R1 R2 T2/V T3/W MOTOR 8 JKwww.jaki.com.tw
10 Note: 1. R1: Closed is forward(fwr). 2. R2: Closed is reversal(rev). 3. If "R1" is in the closed state (forward state), "R2" by adding the signal contact, then "JK reversal" will not reverse the action, which is interlocked protection functions. 4. Please install the high speed fuse additional on R and S phase side. R S T Three Phase Source Voltage NFB High Speed Fuse DC Control Input:10~32VDC R1 R2 FWR REV Forward Reverse (F) (C) INPUT 10VDC 32VDC L1/R L2/S L3/T ~ (R) 3W F/R SSR xxxv xxxkw JKxxxxxxxx S/N:xxxxxxx L1 L2 L3 T1 T2T3 T1/U T2/V T3/W MOTOR L1 L2 L3 T1 T2 T3 JK 9
11 Dimension: 19mm Three Phase Solid State Relay 19mm JKXXXX-HDC,HAC Forward FWR 37mm Reverse REV L1/R (F) L2/S L3/T INPUT 5mm ~ (C)180VAC 37mm (R) A75 A75Heat sink. 58 mm 265VAC T1/U T2/V 74mm T3/W 118mm 86mm 126mm 126mm Model 10 JK4415HDC, JK4430HDC JK4415HAC, JK4430HAC JK 74mm mm Unit 1 Photo No. P.1
12
13 CE Certificate: 12 JK
14 JAKI Enterprise Co., Ltd. No.11, Lane2 Rencih St., Dali City, Taichung City Taiwan TEL: FAX: JK 13
Power factor correction Static switching units (Three phase).
Power factor correction Static switching units (Three phase). Automatic capacitor banks with static system. JK JAKI JK3PSZT-XXXXX Automatic capacitor banks with static system. Introduction Selection table
More informationModel Number Structure
Solid State Relays (Single-phase) G3PB New Single-phase Solid State Relays with Compact Size for Heater Control Slim models with a thickness of only 22.5 mm are also available. Compact design achieved
More information(with Class-1 AC resistive load) 3. G3PB-215B-2N-VD kW max. (25 A) G3PB-225B-3N-VD 2. G3PB-225B-2N-VD kw max. (35 A) G3PB-235B-3N-VD 2
Solid-state Contactor (New Heat Sink Construction) G3PB Space and working time saved with new heat sink construction. Series now includes 480-VAC models to allow use in a greater range of applications.
More informationRated load current (resistive load) SRP. Min. 0.9 (max. 25 of difference between voltage phase and current phase)
SRPH1 Series Single Phase, Analog Input Type SSR Features Power control/ Cycle control/phase control (fixed cycle/ variable cycle) are available with 4-mA analog input Superior dielectric strength : 4,000VAC
More information48 Series - Contactor Relay 4PST - N.O. - Double Make, 15 Amp
48 Series - Contactor Relay 4PST - N.O. - Double Make, 15 Amp E13224 The 48 series is a contactor with a 4 normally open, double make contacts rated up to 3HP. It uses a solenoid type moving core design
More informationG3PE-Single-phase. Solid State Relays for Heaters
Solid State Relays for Heaters Single-phase CSM_Single-phase_DS_E Compact, Slim-profile SSRs with Heat Sinks. s with No Zero Cross for a Wide Range of Applications. RoHS compliant. s also available with
More informationSolid state DC Motor reverser SGRD This product was designed with an evolutionary spirit, other possibilities on request :
Page 1/7 GB Solid state DC Motor reverser SGRD01006 Reverser relay DC with integrated free wheel diode Control by switch ON/OFF, by direction turn control Forward and reverse Built-in overvoltage protections
More informationTeSys contactors. Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current Ie. to be wired in series
Selection 3-pole shockproof contactors FG d.c. supply Selection guide for utilisation categories DC-1 to DC-5 Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current
More informationSolid State Relays For Motor Control MAIN CHARACTERISTICS. Phase to Phase Voltage 200 to 480VAC. Mains Frequency
celduc Page 1/16 INDUCTION MOTOR SOLID-STATE REDUCED VOLTAGE STARTER (SOFTSTARTER) WITH SOFTSTOP FEATURE SMCV6110 celduc relais SMCV can be employed everywhere using a costly and relatively big variable
More informationOrdering Information. Text PCB Power Relay G5RL. Low-profile Relay with Various Models. Power Relays
Low-profile Relay with Various Models Low profile:.7 mm in height Clearance and creepage distance Between coil and contacts: 8 mm/8 mm Between contacts of the same polarity: 3 mm/4 mm Models with AC coil
More information20 amps 220 amps, 60 Hz VDC VAC G3PA-420B-VD-2 DC amps 440 amps, 60 Hz G3PA-450B-VD-2 DC12-24
Solid State Relays (SSRs) G3PA/G3PB Long Service Life for Circuits that Cycle Frequently D D D D D Built-in heat sink increases life and reliability Voltage turn-on at zero crossing reduces initial inrush
More informationReduced Voltage Motor Starters
Reduced Voltage Motor Starters Soft Start Controllers. Solid-State Controllers Product Overview........................................ Type S70, Soft Start Controllers............................. Type
More informationIndustrial Contactors CTX 3 3P 185A - 800A
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 Industrial Contactors CONTENTS PAGES 1. Description - Use... 1 2. Range... 1 3. Overall dimensions... 1 4. Installation - Connection...
More informationCTX 3 Control relays Cat. N (s) : /06/09..14/16/19..24/26/29
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 CTX 3 Control relays Cat. N (s) : 4 168 00..04/06/09..14/16/19..24/26/29 CONTENTS PAGES 1. Description - Use... 1 2. Range... 1 3.
More information韩国 Autonics 进口固态继电器型号模拟固态继电器 SRPH1 SRPH1 Series SSR 比例控制继电器选型说明书 pdf Single phase, Analog input type SSR Features Power control/ Cycle control/phase c
Series Single phase, Analog input type SSR Features Power control/ Cycle control/phase control (fixed cycle/ variable cycle) are available with 4-mA analog input Superior dielectric strength : 4,000VAC
More informationSolid State Relays Datasheet WG 480 D...Z
Datasheet WG 4 D...Z Features Switching Zero cross Output Input Back to back SCR with internal snubber DC with constant current control Applications Resistive and inductive loads with cos > 0.85 Technical
More informationSemiconductor (AC) fuses
Main characteristics 450 TO 700VAC / 63 TO 2800A Recognized Exceptionally low I 2 T, Watt losses. Non-magnetic construction, Highly reliable low voltage Trip-indicator system, conformity to UL, IEC, DIN
More informationRSS Series Panel Mount Solid State Relays. 4,000 RMS (minute)
RSS Series Panel Mount Solid State Relays Key features of the RSS series include: Photo isolation 1,200 volt blocking voltage 4,000 volt optical isolation Zero voltage turn-on 100% tested at rated current
More informationSolid State Relays Datasheet WG 480 D...Z
Datasheet WG 4 D...Z Features Switching Zero cross Output Input Back to back SCR with internal snubber DC with constant current control Applications Resistive and inductive loads with cos > 0.85 Technical
More informationSolid State Relays G3RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. SSR and Socket Combinations
Solid State Relays G3RV Slimmest OMRON plug-in SSR with maximum width 6.2 mm Long electrical life and high speed switching Large plug-in terminals for reliable connection G3RV-D (DC load) models can manage
More informationSolid State Relays For Motor Control MAIN CHARACTERISTICS. Phase to Phase Voltage. 200 to 480VAC 40 to 65Hz 10 to
celduc S/MOT/SMCW6080/C/22/07/99 Page 1/16 INDUCTION MOTOR SOLID-STATE REDUCED VOLTAGE STARTER (SOFTSTARTER) WITH SOFTSTOP FEATURE (PRELIMINARY DATA) celduc relais SMCV can be employed everywhere using
More informationMotor Controllers Soft Starting/Soft Stopping Types RSC 4.../RSO 12.., RSC 60.../RSO 16..
otor Controllers Soft Starting/Soft Stopping Types RSC 4..../RSO 12.., RSC 60.../RSO 16.. Control and output modules for soft starting/stopping of 3-phase induction motors Rated operational current: 3
More information1 Phase electronic contactor (SC 1)
1 Phase electronic contactor (SC 1) - Rated operational voltage up to 600VAC 50/60 Hz - Rated operational current up to 15/30A/50/63A AC-1 - Control voltage from or - Compact modular design 22.5, 45, or
More informationSquare D General Purpose Relays
Square D General Purpose Relays Class 0R plug-in relays 0RS (SPDT) 0RS (DPDT) 0RS3 (3PDT) 0RS (PDT) Catalog 0 Contents Class 0R plug-in relays bbspecifications....................................................
More informationRelays. Industrial Automation Catalog Section - U906. Selection Guides. Solid State Relays RSS Series
Industrial Automation Catalog Section - U906 Relays Selection Guides Solid State Relays For up-to-date information, or to request a full copy of this catalog, contact us at www.idec.com or 800-262-IDC..
More informationAF09... AF30 3-pole Contactors up to 25 HP / 600 VAC
AF09... AF0 -pole Contactors up to 25 HP / 600 VAC Contactors and Overload Relays Overview.../0 AF09... AF0 -pole Contactors.../2 Main Technical Data.../8 Main Accessory Fitting Details.../2 Main Accessory.../24
More informationSolid State Relays, 3-phase
PMA Prozeß- und Maschinen-Automation GmbH Solid State Relays, 3-phase Zero-Point switching, heatsink integrated Main Characteristics: Three-phase controlled Zero switching LED display Various connection
More information3 - Protection components Motor circuit-breakers
Contents 0 - Protection components Motor circuit-breakers protection components for the motor protection Thermal-magnetic motor circuit-breakers Selection guide..............................................page
More informationModel Number Structure
Solid State Relays CSM DS_E_2_2 Extremely Thin Relays Integrated with Heat Sinks Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting possible
More informationGJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector
GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector Catalog 0500CT9702R409 2009 Class 525/580 CONTENTS Description............................................. Page General Characteristics...................................
More information15 16 MCCBs for Power Distribution Technical Specification Frame 100A 250A 250A 400A 400A 630A 800 / 1000 / 1250 Type C DN0-100 D DN1-250 N DN2-250 D N S H DN3B-400 DN3-400 D N D N S V DN3-630 DN4-1250
More informationApplicable output load (See note 2.) Photocoupler Yes Yes 40 A at 110 to 220 VAC 5 to 24 VDC G3NB-240B 5 to 24 VDC G3NB-240B-UTU 5 to 24 VDC
Solid State Relays G3NB with 40-A output at a reasonable price. Switches 9 A without a heat sink. Zero cross function enables less noise operation. Built-in varistor effectively absorbs external surges.
More informationSolid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60 Zero switching (RM1A) or instant-on switching (RM1B) AC Solid State Relay Direct copper bonding
More informationand other modular devices for low voltage installation
Technical catalogue System and other modular devices for low voltage installation 2CSC400002D0204 SUMMARY Introduction Miniature Circuit-Breakers Residual Current Devices Auxiliary elements and accessories
More informationTECHNICAL DESCRIPTION
DC Circuit Breaker TECHNICAL DESCRIPTION TRK5650515200 Ed.1 of 21/02/13 CONTENTS 1. INTRODUCTION... 2 2. DESCRIPTION... 2 2.1 Description of circuit breaker... 2 2.2 Operating mode... 2 2.3 Variants and
More informationNB1 Miniature Circuit Breaker
P-00 Modular DIN Rail Products MCB NB Miniature Circuit Breaker Color coded contact position indicator provides visual indication of the device status and insulation function Magnetic trip elements provide
More informationFAMILY. 1-Phase 1 Up to 25A Up to 40A Up to 80A Up to 600VAC 3-Phase, 2 leg 1 No Up to 33A Up to 80A Gang 2 units
THE DIN-A-MITE FAMILY 1 Refer to curves on reverse side for specific ratings. ➁ angle fire is not CE approved for conducted or radiated emissions. ➂ Will fit within the width dimension of most comparable
More informationSolid-State Relays. Solid-State Relays. Features. Description. Overview
Features Rugged, epoxy encapsulation construction 4,000 volts of optical isolation Subjected to full load test and six times the rated current surge before and after encapsulation Unique heat-spreader
More informationModel Number Structure. Power Controllers G3PX. Single-phase Models. Model Number Legend
Power Controllers GPX Refer to Safety Precautions (page 0). Single-phase Models EUN Series AC Power Controllers with Phase-control System Allow Precise Temperature Control Models with Base-up and Soft-start
More informationInsulation method Zero-cross function Indicators Applicable output load Model number Phototriac coupler Yes Yes (See page 6) Main Circuit
SSR with Failure Detection Function Detects failures in SSRs used for heater temperature control and simultaneously outputs alarm signals. This product supports the safe design of heater control systems,
More informationSolid-State Relays. Solid-State Relays. Features. Description. Overview
Features Rugged, epoxy encapsulation construction 4,000 volts of optical isolation Subjected to full load test and six times the rated current surge before and after encapsulation Unique heat-spreader
More informationMax. Input Power (W) Input Current. Inrush 347V Vin 60/ C. 480V Vac Vin 85 / 115. Dimming Method.
Power (W) Voltage (V) Current (A) Efficiency@ Max Load Max Case Temp. ( C) Input Current Max. Input Power (W) Inrush Current (Apk/50%-µs) THD @ Max Load (%) Power Factor @ Max Load Surge Protection Common/Diff
More information150 WATT HEW SINGLE SERIES DC/DC CONVERTERS
Features Description The 4:1 Input Voltage 150 W single HEW Series of DC/DC converters provide precisely regulated dc outputs. The output voltage is fully isolated from the input, allowing the output to
More informationCOMPONENTS. Off-load Switch for Fixed Installation Title type SW
COMPONENTS Off-load Switch for Fixed Installation Title type SW General information The SW off-load switch is a complete range designed to cover all the applications to be met in DC traction power substations
More informationAF / AF12Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101404D0201 24/03/11-30-10-.. / Z-30-10-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220
More informationContact us. ABB France Electrification Products Division Low Voltage Products and Systems 3, rue Jean Perrin F Chassieu cedex / France
Contact us ABB France Electrification Products Division Low Voltage Products and Systems 3, rue Jean Perrin F-69687 Chassieu cedex / France You can find the address of your local sales organisation on
More informationGTS-L 5 / 10 / 15 POWER SOLID STATE RELAYS WITH LOGIC CONTROL TECHNICAL DATA
GTS-L / 0 / POWER SOLID STATE RELAYS WITH LOGIC CONTROL Main applications Extrusion lines and injection presses for plastics Hot channels Thermoforming machines Packing and packaging machines Temperature
More informationYS Series Contactors YS1N- F11 ****
YS Series YS Series Contactors Key features of the YS Series include: Compact size AC and C coil, reversing and non-reversing Weld-resistant silver alloy contacts No cadium used in contacts Highly reliable
More informationcor Long Run Experience
Moulded Case Circuit Breakers Moulded Case Circuit Breakers 16-1250A cor Long Run Experience cor Breaking capacity (according to IEC 947-2 at 415V) Icu 100 D160L D250L D400L D630L 70 60 DH800 50 35 30
More informationDC with constant current control. Applications resistive and inductive loads with cosϕ > 0,85 (Z-Type) inductive load with cosϕ > 0,65 (R-Type)
Solid State Relays Overhaamlaan 4 37 Tongeren, Belgium Phone: +32 12394 Datasheet WG 66 D xxxx Features Switching Zero cross Output Back-to-back SCR with internal snubber Input DC with constant current
More informationPOLARISED, MONOSTABLE SAFETY RELAY with (mechanical linked) forced contacts operation
(SF3 pending) (SF3 pending) (SF3 pending) POLARISED, MONOSTABLE SAFETY RELAY with (mechanical linked) forced contacts operation SF-RELAYS π.098±.0.098±.0.098±.0 5.0.984 6.5±0.3.650±.0 33±0.3.99±.0 6.5±0.3.650±.0
More informationB115...B180 RF200 RFN200 B250...B400 RF400 RFN400
Page -2 Page -4 Page -6 FOR BG SERIES MINI-CONTACTORS Type RF9, phase failure sensitive, manual resetting Type RFA9, phase failure sensitive, automatic resetting Type RFN9, non-phase failure sensitive,
More informationRDL06-48 S 05 W - M3 Series Name Input Output Output Input Operating ambient Voltage Quantity Voltage Range temperature PART NUMBER STRUCTURE
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE RDL06-48 S 05 W - M3 Series Name Input Output Output Input Operating ambient Voltage
More informationQuestion Number: 1. (a)
Session: Summer 2008 Page: 1of 8 Question Number: 1 (a) A single winding machine cannot generate starting torque. During starting the switch connects the starting winding via the capacitor. The capacitor
More informationTemperature controller. Side. Vac 3. Typically. Temperature controller. Side. Vac Driving SSR. Temperature controller. Resistor. Vac.
Solid State Relays Vdc Input/ Output, Input/ Output High Reliability Shown smaller than actual size ac Controlled used with Controller with dc Voltage Driver Output L Typically ac Controlled used with
More informationMetasol MC 4pole. Contactor. Overview 108 Table of specifications 110 Dimension 114. Contents
Metasol MC Contactor Overview 8 Table of specifications 1 Dimension 114 Contents Series completion More Safe, More Valuable Contactors & Overload Relays dvanced technology & Expert solution Offering economical
More informationMax. Input Power (W) Input Current v 2 2 0v 2 40v. Enclosure
Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Temp. ( C) Input Current Max. Input Power (W) Inrush Current (Apk/50%-µs) THD @ Max Load (%) Power Factor @ Max Load
More informationModel Number Structure
Solid State Relays Extremely Thin Relays Integrated with Heat Sinks Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting possible for linking
More informationMotor Controllers AC Semiconductor Motor Controller Type RSHP Flexy
otor Controllers AC Semiconductor otor Controller Type RSHP Flexy Soft starting and stopping of 3-phase squirrel cage motors Low surge and vibration-free starting User-selected ramping profiles Integral
More informationNon-fusible. Non-fusible disconnect switches 16A 3150A, 600VAC A, 1000VDC. International acceptance. Disconnect switches.
disconnect 16A 31A, 0VAC 200-0A, 1000VDC Disconnect Disconnect ABB SwitchLine includes 16 different amperage sizes from 16A to 31A. The basic construction provides flexibility, safety, and high performance
More informationCircuit breakers and switch-disconnectors NT06 to NT16 and NW08 to NW63
Functions and characteristics Circuit breakers and switch-disconnectors NT06 to NT16 and NW08 to NW63 NT and NW selection criteria Masterpact NT Masterpact NW NT06, NT08, NT10, NT12, NT16 NT06, NT08, NT10
More informationGQ 15 / 25 / 50 / 90 A SINGLE PHASE SOLID STATE RELAYS
GQ 15 / 25 / 50 / 90 A SINGLE PHASE SOLID STATE RELAYS Main features Main applications Packaging Machinery Thermoforming Plastic extrusion lines Industrial ovens and furnaces Control application with high
More informationDPX 1600 Electronic release
87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 1600 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 3. DIMENSIONS (NEXT) 2 4. OVERVIEW 2 5. CONNECTION 2 6. ELECTRICAL AND
More information22AF 40AF AF 150AF 225AF 400AF 800AF
Contactors MC-Series UL508 E108780 Contactor 3 Pole Standards and Certifications UL508 IEC 60947-2 & IEC 60947-4-2 CSA C22.2 No.14 Features 8 Frame Sizes 1/2HP up to 600HP @ 480V AC Screw Terminals (Lug
More informationAF / AF38Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101412D0201 25/03/11-30-00-.. / Z-30-00-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220
More informationThe Z Series. SCR Power controllers for resistance heating applications. Zero-Fired SCR Power Controllers AMPS VAC
The Z Series Zero-Fired SCR Power Controllers 60-1200 AMPS 120-600 VAC SCR Power controllers for resistance heating applications. ROBICON 1996 Rev. 7/96 Applications Robicon s Z series power controls are
More informationControl Power V AC, 50/60 Hz 150-C30NBD 150-C30FHD
Bulletin Product Selection Open Type and Non-Combination Enclosed (IP, NEMA /) Controllers For use with Line-Connected Motors Rated Voltage [V AC] / Motor Current [A]...... Max. kw, Hz Max. Hp, Hz Control
More informationMAKING MODERN LIVING POSSIBLE. Design Guide VLT MCD 100 Soft Starter the single speed drive
MAKING MODERN LIVING POSSIBLE Design Guide VLT MCD 100 Soft Starter the single speed drive Contents Contents 1.1.1 Introduction 2 1.2 Technical Data 3 1.3.1 Functional Diagram 4 1.3.4 Wiring 5 1.3.5 Adjustments
More informationSD700FR. Regenerative Active Front End VARIABLE SPEED DRIVES POWER ELECTRONICS / SD700 SERIES 4 QUADRANT. icool
FR VARIABLE SPEED DRIVES Regenerative Active Front End icool 4 QUADRANT POWER ELECTRONICS / SD700 SERIES FR SD700FR SERIES goes one step ahead keeping the family unique characteristics. Based on the latest
More informationInstallation Contactors RIC, RAC
Installation Contactors RIC, RAC 1 Characteristics Rated operational current: 20 63 A Coil voltages: UC 24, 36, 230 V / AC 400 V Hum-free (UC versions) 2 4 contacts NC or NO Extendable with auxiliary contacts
More informationFunction Relays, Interfaces and Converters
Function Relays, Interfaces and Converters Interface Relays Narrow Design 3TX70 interface relays 3TX701 Interface relay, plug-in Plug-in socket interface, complete with relay Contact Rated control Width
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More informationInput Current at 240V (A) Max. Input Power (W) Enclosure
Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Tcase Max Input Current at 240V (A) Max. Input Power (W) Inrush Current (Apk/50%- µs) Max. THD (%) Power Factor @ Max Load Surge
More informationInput terminals Isolation method Zero cross function Operation indicator Alarm output Applicable load (See note.) Model
Solid State Relays with Built-in Current Transformer CSM DS_E_7_ A New-concept SSR with Built-in Current Transformer. Heater Burnout and SSR Shortcircuit Failure Detection. Built-in Current Transformer
More informationAF / AF16Z pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101408D0201 25/03/11-30-01-.. / Z-30-01-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220
More informationLJASeries. Limit Switches with Positive Opening Mechanism
Limit Switches with Positive Opening Mechanism LJASeries Snap action limit switches with positive opening mechanism enables general industrial machines to comply with EC directives and to acquire CE marking.
More informationEquipment model: auxiliary control. Pack Cat.Nos 10/16 A V± P + T shuttered module module
transformers and buzzers and bells socket outlets and special supports 042 25 042 52 041 07 042 80 042 85 Pack Cat.Nos Bell transformers dconform to IEC / EN 61558-2-8 Protected against overloads and short
More informationThe High Power Stack Horizon
Voltage Supply 480-600-690V Current Rating from 150 to 2100A Designed to drive 1-2-3 Phase Loads Internal Fuse with Micro for Fuse Failure Stall Fan Protection for 1100 to 2100A Control Board with Plug
More informationSOLITRON MIDI - With Integrated Heatsink Types RJ1A, RJ1B
Solid State Relays SOLITRON MIDI - With Integrated Heatsink Types RJ1A, RJ1B AC semiconductor contactor Zero switching (RJ1A) or instant-on switching (RJ1B) Direct copper bonding (DCB) technology LED-indication
More informationApplicable Terminal Relay Rated voltage Model G6D-F4B 12 VDC G6D-1A (see note) 24 VDC 12 VDC G6D-1A-AP (see note) 24 VDC G3DZ-F4B 12 VDC G3DZ-2R6PL
Terminal Relay Easy-to-use, Space-saving Terminal Relay with Four-point Output Almost the same size as PYF Socket: 31 x 35 x 68 mm (W x H x D) Each terminal circuit (with coil or contact) is independent
More informationAF40... AF96 3-pole contactors 30 to 60 hp at 480 V AC AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts
AF4... AF96 -pole contactors to 6 hp at 48 V AC AC / DC operated with N.O. N.C. auxiliary contacts Description AF4... AF96 contactors are mainly used for controlling -phase motors and power circuits up
More informationSelection Guide Motor Control Device Solutions
Selection Guide Motor Control Device Solutions Expect more and get it from c3controls. Our portfolio of Motor Control Devices consists of worldclass products designed and manufactured to meet your requirements
More informationOutput Current Input Current Reflected Ripple. VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf %
FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range - C
More informationCOMPONENTS. Multi-functional Main AC Switch for rolling stock Type MACS
COMPONENTS Multi-functional Main AC Switch for rolling stock Type MACS GENERAL INFORMATION MACS is a platform for Main AC Switch installed on electric rail vehicles running on AC networks. The AC vacuum
More informationPCB Relay. Contact form Terminals Coil terminals Rated voltage Model SPST-NO #250 tab terminals PCB terminals 5, 12, 24 VDC G4A-1A
PCB Relay Miniature Single-pole Relay with 80-A Surge Current and 20-A Switching Current Ideal for motor switching. Miniature, relay with high switching capacity built-in applications. Creepage distance
More informationVDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More informationDIN EN UL 508 / CSA 3RF A A 0 2
PMA Prozeß- und Maschinen-Automation GmbH Solid State Relays Zero-Point Switching, heatsink integrated Main Characteristics: Zero switching LED display Various connection technologies Plug-in control terminal
More informationMeta Solution. Contactors and Overload relays
Meta Solution Contactors and Overload relays Meta Solution New generation of Contactors from LSIS Contactors and Overload Relays Metasol Contactors Designed to show superior technology: The Metasol series
More informationPDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option
More informationINDUSTRIAL POWER SUPPLIES SFL-SERIES
INDUSTRIAL POWER SUPPLIES SFL-SERIES Operating Instructions 1. Application The SFL-series are compact, rugged switching power supplies designed for applications in process automation and other industrial
More informationG3PE-Single-phase. Solid State Relays for Heaters
Solid State Relays for Heaters Single-phase Compact, Slim-profile SSRs with Heat Sinks. Models with No Zero Cross for a Wide Range of Applications. RoHS compliant. Models also available with no zero cross
More informationApplication Description
-14 Type, Intelligent Technologies (IT.) Soft Starters February 2007 Contents Description Page Type, Intelligent Technologies (IT.) Soft Starters Product Description....... -14 Application Description....
More informationProtection and Connection Motorized and automatic transfer switches IEC Technical guide
Protection and Connection Motorized and automatic transfer switches IEC 61439 Technical guide Motorized change-over switches Uninterrupted power supply with motorized functionality ABB offers a wide variety
More informationMounting type Contact form PCB terminals Screw terminals Quick-connect terminals
Power Relay A High-capacity, High-dielectric-strength, Multi-pole Relay Used Like a Contactor Miniature hinge for maximum switching power for motor loads as well as resistive and inductive loads. No contact
More informationOrdering Information. Switching Power Supply S82F. Industrial-Grade Power Supply for General or Peak Load Applications SWITCHING POWER SUPPLIES
Switching Power Supply S82F Industrial-Grade Power Supply for General or Peak Load Applications Correct input voltage range is automatically selected: 1 VAC or 2 VAC. Model S82F-P is suitable for peak
More informationReduced Voltage Motor Starters
Soft Start Controllers. Solid-State Controllers Product Overview........................................ Type S70, Soft Start Controllers............................. Type S70, Soft Start Controllers with
More information01 Spectra Plus - Introduction
01 Spectra Plus - Introduction Standard features Conforming to IS13947-2/EN60947 2 Compact dimensions Available in 3P & 4P High performance microprocessor protection release Wide overload setting from
More information1 3RT1016-1A**1 1 3RT1017-1A** RT1025-1A** RT1025-3A** RT1034-1A** RT1034-3A**0 175.
SIRIUS 3RT0 3-Pole with AC Coil 3RT0* through 3RT04* 4-point AC coil can be wired on top, bottom, or diagonally. Direct mount 3RU or 3RB0 solid state overload relays to create starters. Snap-on auxiliary
More information2.1 Warnings & Agency Approvals Electrical Connections - Specifications Standard Wiring Configurations...2 4
CHAPTER ELECTRICAL 2 INSTALLATION Contents of this Chapter... 2.1 Warnings & Agency Approvals..................2 2 2.1.1 Isolation..............................................2 2 2.1.2 Electrical Power
More informationOffers. QOvs RCBO residual current devices. Protection Earth leakage protection. Variants
devices Offers This page must be removed before publishing The Schneider Electric residual current devices range comprises various offers (A, B, C, D) so as to be as competitive as possible in each country,
More information