Lab jacks. With the partnership of Bochem Lab Supply INDEX
|
|
|
- Sharon Anthony
- 5 years ago
- Views:
Transcription
1 Lab jacks With the partnership of Bochem Lab Supply INDEX
2 Electrical lift LIFT 240 First electrical lab jack of compact design! More and more lab activities are performed in the hood. However, space conditions are often quite restricted there. This is the reason why the new electrical Lift 240 of BOHEM comes with motor and control system integrated in the lab jack. Ensuring an absolutely stable stand and wobblefree lifting and lowering, it offers perfect safety. The extremely robust, highly precise scissor technology of steel and the electronic components are durably protected using a bellows of chemically resistant PTFE. And since every hood is only really safe, if it remains closed, the lab jack is operated by a remote control! The design of the electrical Lift 240 is identical with that of the mechanical 240 x 240 mm BOHEM lab jack. Both variants can be used and replaced, as desired, in existing structures. An end stop can be manually adjusted at the outside. Dimensions, retracted (LxWxH): 240 x 240 x 120 mm Max. height: 300 mm Workspace (LxW): 240 x 240 mm Weight: 6 kg Lifting speed: 480 mm/min Max. lifting of scissor: 180 mm Max. load capacity (dynamic): 25 kg Nominal torque: 8 Nm Degree of protection: IP 30 Supply voltage transformer: VA, 50/60 Hz Output: 12 V Battery remote control: 3 V, Lithiumzelle R2430 Permissible ambient temperature: 5-45 Noise emission: less than 40 db (A) work space: Stahl body: Stahl corrugated bellows: PTFE
3 Lab-Jacks, stainless steel For those who wish to reach the top New design and improved construction: - Improved scissor technology with reduced tolerances - All models are manufactured according to DIN Smaller models up to 240x240mm (Typ 1) have a simple adjusting wheel, which can be operated by hand. - With the bigger models from 300x300mm on (Typ 2) we recommend the use of a ratchet, which connects with a special adjusting wheel. The ratchet is included. A (Length) B (Width) min Kg dyn Kg stat Type Ratchet Lab-Jacks, stainless steel New design and improved construction: - Improved scissor technology with reduced tolerances B Kg Kg A (Length) Type (Width) min dyn stat Al green Al green Al green Al green Al green Al green Ratchet
4 Lab-Jacks, aluminium anodized New design and improved construction: - Improved scissor technology with reduced tolerances - All models are manufactured according to DIN Smaller models up to 240x240mm (Typ 1) have a simple adjusting wheel, which can be operated by hand. - With the bigger models from 300x300mm on (Typ 2) we recommend the use of a ratchet, which connects with a special adjusting wheel. The ratchet is included. A B Kg Kg Type (Length) (Width) min dyn stat Al anodized Al anodized Al anodized Al anodized Al anodized Al anodized Ratchet Lab-Jacks, aluminium anodized for support jacks stainless steel & aluminium, type 2 (300 x 300 mm) aterial A (Length)
5 Lab-Jacks MAXI stainless steel - The MAXI lab jacks offer 30% more height because of an amplified construction - Adjustment of height with the help of an adjusting wheel. A (Length) B (Width) min Kg dyn Kg stat Lab-Jacks MAXI, aluminium - The MAXI lab jacks offer 30% more height because of an amplified construction - Adjustment of height with the help of an adjusting wheel. A (Length) B (Width) min Kg dyn Kg stat Al green Al green Al green Al green - 4 feet - 6 bars Palettes stainless steel A (Length) B (Width) (Height) Kg
6 Lift trucks, hydraulic - With foot pump - 2 steering rolls - Brake Type 1: Standard Type 2: Table made in stainless steel A B Kg Type (Length) (Width) min Steel stainless steel
Standards NFE Max. particle size 50 µm. Pressure for determining piston forces. Materials:
Ports: - double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread, 1 Standards NFE 49004 Compressed air connection Internal thread Ambient temperature min./max. -20 C / +80 C
Max. particle size 5 µm. Pressure for determining piston forces Repetitive precision. Polyurethane
Piston rod cylinders Guide cylinders 1 Ambient temperature min./max. +0 C / +60 C edium Compressed air ax. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining piston
Standards NFE Max. particle size 50 µm. Pressure for determining piston forces. Materials:
Piston rod cylinders Short-stroke and compact cylinders 1 Standards NFE 49004 Compressed air connection Internal thread Ambient temperature min./max. -20 C / +80 C Medium temperature min./max. -20 C /
the Inverter Motor Compact, Efficient, Dynamic - Optimized!
We present the Inverter Motor Compact, Efficient, Dynamic -! Think out of the box fill the void! Standard AC motors: for mains operation (nominal frequency: 50/60Hz) For inverter operation with special
MACH LED PLUS SURFACE-MOUNTED LUMINAIRE
ENG MACH LED PLUS SURFACE-MOUNTED LUMINAIRE 2 mach LED PLUS FOR THE ADDED PLUS OF POSSIBILITIES. Every day, hundreds of thousands of Waldmann luminaires are used for tough applications all over the world.
Standards ISO Max. particle size 50 µm. Pressure for determining piston forces. Materials: Polyurethane
Ports: - double-acting with magnetic piston Cushioning: elastic Piston rod: external thread 1 Standards ISO 21287 Compressed air connection Internal thread Working pressure min./max. 1 bar / 10 bar Ambient
C-SERIES S-SERIES. Metric Machine Screw Jacks EMA LINEAR ACTUATORS
C-SERIES S-SERIES Metric Machine Screw Jacks EMA LINEAR ACTUATORS Power Jacks has a proud engineering heritage dating from the earliest years of the 20th Century. A heritage that is about excellence: about
short name: 3WL.IG* technical product sheet created :57 1/6 3-way ball valve F/F PN 63 with pneumatic actuator hard anodized aluminum
with pneumatic actuator hard anodized aluminum technical product sheet short name: 3WL.IG* 3-way ball valve F/F PN 63 E-Box MV Port Modell G Kugel Bauart RE06 RE06 1 1 1/ 1/ 3/" 1 1/ 1 1/ 3/" 1 1/ 1 1/
Modular. Compact. Loadable. HLM Stroke Module
HLM Modular. Compact. Loadable. HLM Stroke Module Linear module with optimized overall length, pneumatic drive and scope-free pretensioned junction rollers. Field of Application For lifting of workpieces
High pressure valves. 80 to 350 bar
80 to 350 bar High switchable p Hermetically sealed poppet valves Excellent repeatability of switching times Function even with lager voltage tolerance Compact design DN to DN 40 Technical data Medium:
DPU80r. DPU80r: Excellent compaction with remote control
DPU80r Reversible Vibratory Plates DPU80r: Excellent compaction with remote control Robust and compact in design, the DPU80r offers the same high compaction performance as the sister model with center
MM: Bild angeben Content 690 V AC for baseplate, busbar and supporting rail mounting 60 Accessories 62 Technical Data see page 65 NU System The EFEN s
Basic Efficiency up to 1500 V 1-pole 3-pole SILAS MM: Bild angeben Content 690 V AC for baseplate, busbar and supporting rail mounting 60 Accessories 62 Technical Data see page 65 NU System The EFEN successfully
Swivel modules DSM/DSM-B
Swivel modules DSM/DSM-B Swivel modules DSM/DSM-B Key features At a glance Double-acting swivel module with rotary vanes The swivel angle is infinitely adjustable over the entire swivel range High precision
GEMÜ 205 Electrically operated solenoid valve
Electrically operated solenoid valve Features Hermetic separation between medium and actuator In case of power failure operation possible by manual override Standard integral optical position indicator
Rotary Sensor potentiometric Heavy-duty. Series IPX-7900
Rotary Sensor potentiometric Heavy-duty Series IPX-7900 Special features exceptionally durable design for extreme environmental conditions absolute potentiometric measuring system angle ranges 120, 200
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
1. Car Lifts. Made in Korea.
1. Car Lifts 13 2 POST LIFT KET-4000G/ KET-4000 KET-4000G KET-4000 Model KET-4000G KET-4000 Capacity 4,000 kg 4,000 kg Max. Height (mm) 1,870-1900mm 1,870-1900mm Lowest Height(mm) 130-210mm 130-210mm Lifting
Position Transducers 25,50,75,100,150 mm. Series T, TS
Position Transducers 25,50,75,100,150 mm Series T, TS Position transducers employing conductive plastic resistance and collector tracks provide direct means of measurement in control and regulation systems
checklist: public area / municipalities
checklist: public area / municipalities A company of the PCE-group General data Date: Building project: Customer: Address: Contact person: E-Mail: phone: Demand (e.g. market/concerts): User frequency (e.g.
GMP-Type. Key Features: Integrated Motor-Pump Units
Integrated Motor-Pump Units GMP-Type Key Features: Direct coupling between motor and pump Rotation: Right (viewed from shaft end) Electric motor mounting type: special B3-B14 (IEC 34-7) Rated Voltage:
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to 0.966 Cv) Order code Series and function KM-09-510-HN-442 Standard coils HN at ports 2 + 4 HN at ports 1, 3
Solenoid valves MHJ, fast-switching valves
Solenoid valves MHJ, fast-switching valves Solenoid valves MHJ, fast-switching valves Key features Innovative Versatile Reliable Easy to install Individual electrical connection via connecting cable and
Standards ISO Max. particle size 50 µm. Pressure for determining piston forces 6 bar. Materials:
Bosch Rexroth AG Pneumatics Ø - 100 mm Ports: M5 - double-acting with magnetic piston cushioning: elastic piston rod: Standards ISO 21287 Compressed air connection internal thread 00119673 Working pressure
Drive units for cranes and hoists. Durable Reliable Powerful
Drive units for cranes and hoists Durable Reliable Powerful Reliability in many areas ABM Greiffenberger develops and manufactures cutting edge drive unit solutions in highest quality. The individual components
Actuator LA29. Data sheet LINAK.COM/HOMELINE
Actuator LA29 Data sheet LINAK.COM/HOMELINE LA29 The LA29 actuator is a HOMELINE actuator specially made for domestic applications. The actuator has a very short installation dimension as the distance
8 MM SHAFT 12 MM SHAFT LOW SPEED HIGH TORQUE KS LINE
8 MM SHAFT 12 MM SHAFT LOW SPEED HIGH TORQUE KS LINE THE COMPACT SOLUTION FOR HIGH TORQUE A NEW DEFINITION OF EFFICIENCY With only 48 or 57 mm lenght, you can obtain 60 and 100 Nm torque, with an efficency
3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.
AP64E00DX00X Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Spool valve Mounting screws M Tube connection Thread Port size ; 7.4 deep
ORIGA Pneumatic Linear Drives OSP-L
ORIGA Pneumatic Linear Drives OSP-L Very long lifetime and lowest leakage A NEW Modular Linear Drive System With this second generation linear drive Parker Origa offers design engineers complete flexibility.
Valve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv)
Valve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv) Order code Series and function 1) Plug socket see page 5.042. KN-05-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
Oil/Air Cooler Units
COMPLETE OIL / AIR COOLER SYSTEM WITH AXIAL FAN FOR INDUSTRIAL APPLICATIONS. General description In hydraulic systems energy is transformed and transmitted. During this process, efficiency losses occur,
Combined Bearing/Freewheel CSK CSK..2RS
Combined Bearing/Freewheel CSK CSK..2RS TYPE CSK CSK..2RS T ype CSK is a sprag type freewheel integrated into a 62 series ball bearing (except sizes 8 and 40). It is bearing supported, delivered grease
ARI-PACO 2G 1,6 D/Y. Electric thrust actuator. Electric thrust actuator ARI-PACO 2G 1,6 D/Y. Electric thrust actuator. ARI-PACO 2G 1,6 D 1,6 kn
ARI-PACO 2G 1,6 D/Y Electric thrust actuator Electric thrust actuator ARI-PACO 2G 1,6 D/Y Electric thrust actuator ARI-PACO 2G 1,6 D 1,6 kn Input signal: 3-point Optional: Potentiometer Additional limit
Construction Enclosure coupling and elbow coupling fittings are die-cast from G AL SI 12 aluminum. Suspension tubing is steel.
Tara Plus Measurement Conversions 1 kg = 9.81 N 1 lb = 4.44 N e.g. 500 Newtons = 51 kg = 112.4 lbs 300 Newtons = 30.6 kg = 67.4 lbs 100 Newtons = 10.2 kg = 22.5 lbs 1 foot = 0.305 m Application Taraplus
System 8. Solenoid Coils Armature Assemblies Valve Systems. Nass Controls LP Nass Magnet GmbH Precision Controls Kft.
Solenoid Coils Armature Assemblies Valve Systems Nass Controls LP Nass Magnet GmbH Precision Controls Kft. Introduction......................................... Page 4-5 Solenoid Coil Width 22 mm Connection
Pressure Compensator Valves Series R5P (SAE Flange Mounted) General Description. Features
Technical Information General Description Series R5P direct operated, 3-way pressure compensators can be combined with any type of fixed or adjustable flow resistor (throttle) to provide a load compensated
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
Red/green-LED for switching state indication (dyn.) Yellow LED for dirt accumulation indication
FLB Series FLB-F2-...-HS (High Speed) - High switching frequency (10kHz) - Integrated electronics - High sensitivity (adjustable via 5-step switch) - Pulse length adjustable via 5-step switch - Dynamic
eco-series Energy-efficient stirring and agitating technology 90% 75dB mechatronics low noise emission
mechatronics eco-series Energy-efficient stirring and agitating technology 75dB low noise emission 90% 1 Who we are Since its foundation in 1988, PTM mechatronics GmbH develops, produces and distributes
ARI-STEVI 470 / 471 (DN15-150)
With pneumatic and electric actuators ARI-STEVI 470 / 471 (DN15-150) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 Pneumatic
Highest Performance: SPH Series
Highest Performance: Series The series features helical gearing which brings a whole new level of power and precision to GAM s already extensive portfolio of gear reducer technology. With special attention
antriebstechnik ELA Electromechanical Linear Actuator
D antriebstechnik ELA Electromechanical Linear Actuator Electromechanical Linear Actuators ELA Electromechanical Linear Actuators (ELA) consist of trapezoidal or ball screws driven by an electric motor
Level switches Series LC40 Float level switch for liquids
Level switches Series LC40 Float level switch for liquids Simple and robust construction Versatile and easily adaptable to the different control positions of the industrial processes Side or top of the
VALVES SERIES 70, SOLENOID/PNEUMATIC
VALVES SERIES 7, SOLENOID/PNEUMATIC TECHNICAL DATA Pressure range: monostable bistable asserved Minimum actuation pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow
SLIM - SPLIT - BEARING
SLIM - SPLIT - BEARING Type series PBXU Type series PBXC Type series PBAC Type series PFXC Type series PFAC Type series HFXD Type series PBDV Type series YKT Publication DRL 100 E 09/2004 Index Page 2
20 to 150 mm 2-Way Automatic Flow Balancing Control Ball Valves
VFB30 Series Issue Date February 1, 2016 20 to 150 mm 2-Way Automatic Flow Balancing Control Ball Valves Low Torque Facilitates the use of smaller, less expensive directmount rotary-motion actuators Extends
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv)
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/4 1300 and 1580 Nl/min (1.321 and 1.606 Cv) Order code Series and function M-07-310-HN-442 Standard coil HN at port 2 + 4 HN at port
BC 4.3. Gas Tight Dampers GTD-GB40-B-E LISTED
BC 4.3 Gas Tight Dampers GTD-GB40-B-E Table Of Contents S. No Description Page No 1 Gas Tight Damper with Electric Drive 1 2 Electric Drive - Details 2-3 3 Gas Tight Damper with Pneumatic Drive 4 4 Pneumatic
Examples 3/2-way valve A T NO: Symbol
1/1 Hauhinco-3_2-way valve_b1_dn3-25_pn320_pn500_x,y-intern water s 01/2016 3/2-way valve B1 X,Y - DN3 DN25 PN320, PN500 Features: Hydraulically actuated directional seat valve controlling liquid media.
Automated Precision Weighing
Automated Precision Weighing Designed for Automation Compact Precision Weighing High precision Designed to meet the most demanding customer specifications. The WMS is a high speed high accuracy weigh module
R310EN 2211 ( ) The Drive & Control Company
eline Ball Rail Systems R310EN 2211 (2006.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball
Pressure Transmitters
Transmitters Wetted parts are all made of stainless steel for high resistance to chemicals Stainless steel diaphragm welded with casing No seals and thus low leakage rate even with difficult gases High
SYSTEM SOLUTIONS FOR WIND POWER alkitronic Torque Multipliers and Services
SYSTEM SOLUTIONS FOR WIND POWER alkitronic Torque Multipliers and Services alkitronic: Your Partner for Wind Energy You ve got the applications. We ve got the solutions. Wind power systems need to resist
Energy-efficient strength Powerful compressed air motors for high torques combined with very low air consumption.
Energy-efficient strength Powerful compressed air motors for high torques combined with very low air consumption. Overview Powerful compressed air motors for high torques combined with very low air consumption
Contents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview...
SNR Industry Contents Page 3 1. Product description AXC and AXS product overview... 6-8 Dynamic load ratings of the linear motion systems... 9 Compact modules... 10-11 Linear tables... 12 Telescopic axes...
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
APPLICATION OF SYSTEM 8
System 8 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures of all valve components is approimately
Drive units for cranes and hoists. Durable Reliable Powerful
Drive units for cranes and hoists Durable Reliable Powerful Reliability in many areas ABM Greiffenberger develops and manufactures cutting edge drive unit solutions in highest quality. The individual components
C 200 Modern Construction. Flexible Modular Design. Highest Safety.
Ball Valve Modern Construction. Flexible Modular Design. Highest Safety. The System At A Glance Ergonomic hand lever Position locking Safety Guard Double shaft seal with hand lever Intelligent interface
MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2
Mini SPIDER. 30 kg. SWL (Safe Working Load) Pole Operated Pantograph For either 4 or 6 m. Maximum Height support Manual & Motorized Pole options
Mini SPIDER 30 kg. SWL (Safe Working Load) Pole Operated Pantograph For either 4 or 6 m. Maximum Height support Manual & Motorized Pole options OVERVIEW With the important success in the Market of DE SISTI
Linear Actuator with Toothed Belt and Integrated Roller Guide Series OSP-E..BHD
inear Actuator with Toothed Belt and Integrated Roller Guide Series OSP-E..BHD Contents Description Data Sheet No. Page Overview 1.15.001E 11-14 Technical Data 1.15.002E-1 to 3 15-17 Dimensions 1.15.002E-4
Industrial Relay KML(1C, 2C)
Industrial Relay KML(1C, 2C) Features 1C: 15A, 2C: 10A switching capability 1.5kV dielectric strength (between coil and contacts) Various terminals available Socket available 1 & 2 poles configurations
JUMO MIDAS Pressure transmitter
Phone: +44 19 635533 Fax: +44 19 6356 Data Sheet 401001 Page 1/5 JUMO MIDAS Pressure transmitter Brief description Pressure transmitters are used for measuring the relative (gauge) pressure in liquids
hore PRODUCT CATALOGUE nd Offsh arine an ms for Ma & Refrig CENTRIFUGAL FANS HV VAC &
hore nd Offsh arine an ms for Ma geration System & Refrig HV VAC & PRODUCT CATALOGUE CENTRIFUGAL FANS ! "# $ % & " ' (! ) * +,+( -../01..2 PRODUCT CATALOGUE 73-16 CENTRIFUGAL FANS CONTENT PAGE 1. CENTRIFUGAL
KE-M02 configuration Configuratie documentatie documentation KE-M02
Configuratie documentatie KE-M02 1/32 2/32 3/32 4/32 5/32 General Technical Data for Compact Power Module KE series Through the years DCOC has developed a highly evolved modular system resulting in powerful,
Miniature coil (3W) encapsulated in synthetic material. Connection with 3-pin DIN type B plug. Degree of protection IP 65.
NAMUR 1/4 & 1/2 High Flow valves for actuator control Catalogue 4921/GB INDEX General Information...page 2 G 1/4 Series...page 4 G 1/2 Serie...page 6 Accessories...page 8 TECHNICAL DATA Function : Manual
Single-phase CT current transformers Cat. Nos :
Index Pages 1. Description - Use... 2 2. Range...2 3. Overall dimensions...2 4. Preparation - Connection... 3 5. General characteristics...5 6. Compliance and approvals...7 1/6 1. DESCRIPTION - USE Closed-type
Temperature sensors types MBT 153, MBT 120 and MBT 3260
Data sheet Temperature sensors types MBT 153, MBT 120 and MBT 3260 Universal cable temperature sensor Type MBT 153 For temperature measurement and regulation where reliable, robust and accurate equipment
Basic Series Accessories Low Voltage Current Transformer Class 1
Low Voltage Current Transformer Class 1 Current Transformer Current transformers for direct mounting to bus bars or insulated round conductors. Application: indirect measurement of sinusoidal alternating
Company name: Created by: Phone:
Position Qty. Description 1 TP 8-/2 A-F-A-BQQE Date: 29/1/18 Product No.: 9618724 Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter. The pump is of
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/ Nl/min (3.354 Cv)
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/2 3300 Nl/min (3.35 Cv) Order code Series and function M-22-310-HN-12 Standard coils 1) 11 = 12 V DC,,2 W 12 = 2 V DC,,2 W 22 = 2 V AC,
Vane pumps, direct controlled Type PV7...A
Vane pumps, direct controlled Type PV7...A Nominal sizes 1 to 25 eries 1X Maximum operating pressure 1 bar Displacements from 1 to 25 cm 3 H/A 617/95 Type PV7-1X/..RA1MA-... H/A/D 56/97 Typ MPU1-V71-9L/...
2-position electric actuators with Ball valves VBZ ½...11/4
4 831.2 & VBZ ½...11/4 2-position electric actuators with Ball valves VBZ ½ 11/4 90 angle - Unidirectional rotation VBZ ½ 11/4 Electric rotary actuators for two-port ball valves Operating voltage AC 230
LEAB Voltage converter
Product Specification Idavägen 11 352 46 Växjö Tel +46 470 72 74 95 Fax +46 470 72 74 99 www.primepower.se LEAB Voltage converter 0037195 General description This LEAB Voltage conditioner is designed for
Datasheet. Pitch Motor PMSM SP260B8
Pitch Motor PMSM SP260B8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260012a 1 Application The Pitch motor
alpha Basic Line WORM GEARBOXES CVH / CVS
alpha WORM GEARBOXES CVH / CVS If the focus is on smooth running, smooth synchronization properties, and continuous operation, the V-Drive Basic is the right choice for you. 86 CVH Worm Gearboxes CVS 87
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
PNEUMATIC RADIAL PISTON MOTOR
EasyDrive 4 Product features Start / stop under full load possible Maximum torque from starting available Overload protected Maintenance free Low noise level Minimised air consumption at high performance
Datasheet. Pitch Motor PMSM SP190C8
Pitch Motor PMSM SP190C8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260007a 1 Application The Pitch motor
POWER TRANSMISSION RIGID COUPLINGS MINI MINI
POWER TRANSMISSION RIGID COUPLINGS 2 RIGID COUPLINGS FEATURES The Mini coupling is a backlash-free, torsion proof, bending elastic and, above all, maintenance-free steel coupling made in one piece. It
Company name: Created by: Phone:
Position Qty. Description 1 TP -42/2 A-F-A-BQQE Date: 26/1/218 Product No.: 9874287 Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter. The pump is
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator DIN version Application Control valves for heat transfer applications using organic media according to
Automatic metal-edge filter AF 75 S / AF 95 S
Automatic metal-edge filter AF 75 S / AF 95 S with radial scraper cleaning housing in welded design, optionally with cyclone effect Connection size DN 150, DN 200, DN 250 others upon request 1. Features
Datasheet. Pitch Motor PMSM SP190F8
Pitch Motor PMSM SP190F8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260009c 1 Application The Pitch motor
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
CM10-3 A-R-A-E-AVBE F-A-A-N
GRUNDFOS DATA BOOKLET CM1-3 A-R-A-E-AVBE F-A-A-N Grundfos Pump 9686946 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/9686946/cm1-3-a-r-a-e-avbe.html
Functional Description HU /2012. Compact Hydraulic Power Packs USMA 05. Replaces HA /2008. p max 3600 PSI (250 bar) 4.
Compact Hydraulic ower acks USA 05 p max 3600 SI (250 bar) 4.5 G (17 L/min) 12/2012 Replaces HA 7211 6/2008 Compact hydraulic power packs for the use in lifting platforms, elevating tables, ramps, presses,
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Mixing or diverting valves for heat transfer applications using organic
Pressure transmitter for industrial applications Type MBS 4500
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for industrial applications Type MBS 4500 The high accuracy pressure transmitter MBS 4500 is designed for use in almost all industrial applications,
STEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
General Purpose Relay
General Purpose Relay KML 15A switching capability 1.5kV dielectric strength (between coil and contacts) Various terminals available Socket available 1 to 3 pole configurations 1. COIL DATA (at 23 ) 1)
High Pressure Valves
High Pressure Valves Available from BetaValve.com 01494 459 511 Sales@betavalve.com Park House Business Centre, Desborough Park Road, High Wycombe Bucks HP12 3DJ Series 119 Solenoid valve 2 way normally
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator DIN version Application Mixing or diverting valves for heat transfer applications using organic media
Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to Cv)
Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to 1.001 Cv) Order code BM-02-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
Miniature Ball Rail Systems
R310EN 2210 (2004.06) The Drive & Control Company 2 Bosch Rexroth AG Linear Motion and Assembly Technologies Miniature-BRS R310EN 2210 (2004.06) Linear Motion Systems Ball Rail System Standard Ball Rail
SPH Series GAM CAN, JUST ASK!
SPH Series GAM CAN, JUST ASK! - Highest Precision Class The SPH is GAM s latest solution for today s demanding motion control challenges. Available in six frame sizes and nominal torque ratings ranging
Flexible. Light. Productive. LEG Long-stroke Gripper
LEG Flexible. Light. Productive. LEG Long-stroke Gripper Light long-stroke gripper for flexible and highly dynamic handling of various components Field of Application For use in a clean working environment,
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
01_1 Miniature st Headline_36 Ball Rail pt/14.4 Systems mm second line 2 Linear Motion and Assembly Technologies Miniature Ball Rail Systems Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Control valves for heat transfer applications using organic media according
Minera. Oil distribution transformers up to kva. eco design. Minera at a glance. Standards
Minera Oil distribution transformers up to 3 150 kva Minera at a glance Mineral oil-immersed, 50 Hz, three-phase distribution transformers with the following characteristics: Hermetically sealed with integral