Flint & Walling History

Transcription

1 Hz

2 Flint & Walling History In 866, one year after Abraham Lincoln s presidency, Flint & Walling began operations on the corner of Mitchell and Oak streets in Kendallville, Indiana. When first established, F&W built hand operated water pumps and the Flint & Walling windmill, a revolutionary product that quickly spanned the globe. As the only United States pump company to manufacture its own Hz and 6Hz electric motors for jet and centrifugal pumps, Flint & Walling has become known for superior quality and highly efficient products. Today, Flint & Walling continues to build quality product at their original location in Kendallville, Indiana. The company employs, on average, a work force of approximately, several of whom are third and fourth generation employees. The st century promises even greater demand and challenges for efficient, water producing products. Flint & Walling will continue to meet these needs by continuing to build high performing products to move water, whether with sump pumps, whole house water filters, decorative pond fountain pumps, variable speed drive packages, or with city pressure boosting systems. Flint & Walling. All rights reserved.

3 Index FW37 68 Supersedes 74 cm (4 ) & 5 cm (6 ) Submersibles Jet Pumps Centrifugal Pumps Lawn Sprinkler Pumps Pressure Booster Pumps Tanks & Accessories Terms & Conditions Flint & Walling. All rights reserved. 3

4 Cm (4 ) Submersible Model Number Code MODEL NUMBER CODE 4 X 5 A 3 Pump Size cm (4 ) Modifier Code Denote Paint Color, Nameplates, etc.) X - F&W ( Hz) GPM Size 5 - m3/hr (5 GPM) m3/hr (7 GPM) - m3/hr ( GPM) 9-4 m3/hr (9 GPM) 7-5 m3/hr (7 GPM) 35-7 m3/hr (35 GPM) 55 - m3/hr (55 GPM) 85-6 m3/hr (85 GPM) No. of Stages Horsepower Size KW (/3 HP) KW (/ HP) KW (3/4 HP) -.75 KW ( HP) 5 -. KW (-/ HP) -.5 KW ( HP) 3 -. KW (3 HP) 4-3. KW (4 HP) KW (5 HP) KW (5-/ HP) KW (7-/ HP) Variation Code A - Cast Iron Mounting Ring & Discharge Stage, Stainless Shell S - Stainless Steel Mtg. Ring & Discharge Stage, Stainless Shell Flint & Walling. All rights reserved. 4

5 Cm (4 ) Submersible Pumps Series 4X C US UL Std. No KW (/ HP) through 5.5 KW (7-/ HP) to 6 m 3 /hr (5 to 85 GPM) Low, medium and high capacity submersible pumps for home, farm industry and dozens of other domestic or commercial applications 34 Series Stainless Steel or Cast Iron Suction and Discharge Housings Stainless Steel Pump Shell Stainless Steel Hex Drive, Pump Shaft and Coupling Corrosion-resistant Screen and Cable Guard NEMA Standard Motor Mounting Ring Field-replaceable Cartridge Assembly, Lead Guard, Motor and Motor Lead Wire Assembly Stainless Steel, NEMA Franklin Motors - 5 m3/hr (5 through 7 GPM) A Captain Series with Cast Iron Suction & Discharge Housing - 5 m3/hr (5 through 7 GPM) S Commander Series with 34 SS Suction & Discharge Housing 7 through 6 m3/hr 7 through 6 m3/hr (35 through 85 GPM) A Captain Plus Series with Cast Iron Suction and Discharge Housing (35 through 85 GPM) S Commander Plus Series with 34 SS Suction and Discharge Housing Flint & Walling. All rights reserved. 5

6 KW (/ - 5 HP) KW ( - 7-/ HP),.5,, 4, and 5 m 3 /hr (5, 7,, 9 and 7 GPM) - 7,, & 6 m3/hr (35, 55 & 85 GPM) Component Description Discharge Head Commander S Series,.5,, 4, & 5 m3/hr (5, 7,, 9 & 7 GPM).37 through 3.7 KW (/ through 5 HP) Stainless Steel, -/4 NPT, safety rope eyelet included Captain A Series,.5,, 4, & 5 m3/hr (5, 7,, 9 & 7 GPM).37 through 3.7 KW (/ through 5 HP) Cast Iron, -/4 NPT, safety rope eyelet included Commander Plus S Series 7,, & 6 m3/hr (35, 55 through 85) GPM KW ( through 7-/ HP) Stainless Steel, NPT, safety rope eyelets included Captain Plus A Series 7,, & 6 m3/hr (35, 55 through 85) GPM KW ( through 7-/ HP) Cast Iron, NPT Check Valve Poppet Internal removable, with elastomer sealing ring Check valve not included Top Bearing Closed sintered lead free sleeve bearing Closed sintered lead free sleeve bearing Closed sintered lead free sleeve bearing Pump Shell Heavy wall stainless steel Cable Guard Stainless steel Stainless steel or Crush-proof PVC Stainless steel Stainless steel or Crush-proof PVC Staging* Noryl impellers and diffusers; stainless steel floating bearing inserts and acetal diffuser plates Pump Shaft* Stainless steel hex shaft with one piece motor-to-shaft coupling Motor Bracket NEMA standard, stainless steel with NEMA standard, cast iron with stainless NEMA standard, stainless steel with NEMA standard, cast Iron with stainless stainless steel suction screen steel suction screen stainless steel suction screen steel suction screen Motor All pumps driven by a complete selection of stainless steel two wire or three wire All pumps driven by a complete selection stainless steel two wire or three wire motors. (F&W available up to HP). motors. (F&W available up to HP). Order motors separately. Motor Controls F&W control boxes required for three-wire single phase motors. Magnetic starters and heaters are required for three phase models. Purchase at your local electrical outlet. * Replacement cartridge assembly available for select models. Includes all necessary parts to restore pumps to like-new performance. No special tools required. Noryl is a registered trademark of General Electric. Flint & Walling. All rights reserved. 6

7 Pump Performance Curves m 3 /h (4X5) Hz Pump Performance Curves GPM kw (-/ HP) - 47 Stage 9.5 m 3 /h (4X7) Hz Pump Performance Curves GPM Head (Meters). kw (-/ HP) - 39 Stage.75 kw ( HP) - 3 Stage.55 kw (3/4 HP) - 3 Stage Head (Feet) Head (Meters). kw (-/ HP) - 3 Stage. kw (-/ HP) - 5 Stage.75 kw ( HP) - Stage.55 kw (3/4 HP) - 5 Stage Head (Feet).37 kw (/ HP) - 5 Stage 3.37 kw (/ HP) - Stage Flow (m 3 /hr) IL Flow (m 3 /hr) IL73 m 3 /h (4X) Hz Pump Performance Curves GPM 4 m 3 /h (4X9) Hz Pump Performance Curves GPM Head (Meters) kw ( HP) - 35 Stage. kw (-/ HP) - 6 Stage.75 kw ( HP) - 7 Stage.55 kw (3/4 HP) - 3 Stage Head (Feet) Head (Meters) kw ( HP) - Stage. kw (-/ HP) - 6 Stage.75 kw ( HP) - Stage.55 kw (3/4 HP) - 8 Stage.37 kw (/ HP) - 5 Stage Head (Feet).37 kw (/ HP) - 8 Stage Flow (m 3 /hr) IL Flow (m 3 /hr) IL74 Flint & Walling. All rights reserved. 7

8 Pump Performance Curves 5 m 3 /h (4X7) Hz Pump Performance Curves GPM m 3 /h (4X35) Hz Pump Performance Curves GPM kw (4 HP) - 8 Stage Head (Meters). kw (3 HP) - 4 Stage.5 kw ( HP) - 9 Stage. kw (-/ HP) - 7 Stage 4 3 Head (Feet) Head (Meters). kw (3 HP) - 4 Stage. kw (3 HP) - Stage.5 kw ( HP) - 6 Stage. kw (-/ HP) - Stage 4 3 Head (Feet).75 kw ( HP) - 4 Stage Flow (m 3 /hr) IL77.75 kw ( HP) - 8 Stage.55 kw (3/4 HP) - 6 Stage Flow (m 3 /hr) IL76 m 3 /h (4X55) Hz Pump Performance Curves GPM m 3 /h (4X85) Hz Pump Performance Curves GPM kw (7-/ HP) - 3 Stage kw (5 HP) - 5 Stage kw (5 HP) - 3 Stage Head (Meters) 8 6. kw (3 HP) - 9 Stage Head (Feet) Head (Meters) 8 3. kw (4 HP) - Stage 6. kw (3 HP) - 8 Stage 4 Head (Feet) 4.5 kw ( HP) - 6 Stage Flow (m 3 /hr) IL Flow (m 3 /hr) IL79 Flint & Walling. All rights reserved. 8

9 Pump Specifications cm (4 ) SUBMERSIBLE MOTORS & CONTROLS KW HP VOLTS THRUST RATING SUBMERSIBLE MOTOR* CONTROL BOX OR FURNAS MAGNETIC STARTER MODEL NO. MODEL NO. -WIRE SINGLE PHASE.37 / *.55 3/ * *. -/ * 3-WIRE SINGLE PHASE.37 / * / * * / * * * * * WIRE THREE PHASE *. -/ * ** * ** ** ** / ** ** * Motors do not include lead wire. ** Motors include lead wire. -Wire motors are split phase. 3-Wire, phase motors are capacitor start and require control box. 3-Wire, 3 phase motors require magnetic starters and heaters. Flint & Walling. All rights reserved. 9

10 5 cm (6 in.) Submersible Pumps Series 6X 3.7 through KW (5 through 3 HP) 5 to 73.8 m 3 /hr (8 to 35 GPM) High capacity 5 cm (6 In.) submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large water volume applications Cast iron suction and discharge housings Stainless steel pump shaft and coupling Mounting rings available for 3.7 KW (5 HP) cm (4 in.) motors and 3.7 through KW (5 through 3 HP) 5 cm (6 in.) motors Complete selection of Franklin stainless steel motors Single-phase - 3.7, 5.5 & 7.46 KW (5, 7-/ & HP) Three-phase through KW (5 through 3 HP) Pump Size 5 cm (6 in.) Stage Construction X - F&W GPM Size 8-5 m 3 /hr (8 GPM) - 3 m 3 /hr ( GPM) No. of Stages 5 cm (6 in.) SUBMERSIBLE MODEL NUMBER CODE 6 X 5 A HP Size 3 -. KW (3 HP) cm (4 ) Motor 4-3. KW (4 HP) cm (4 ) Motor KW (5 HP) cm (4 ) Motor 6-4. KW (5-/) HP cm (4 ) Motor KW (7-/ HP) KW ( HP) 5 - KW (5 HP) - 5 KW ( HP) KW (5 HP) 3 - KW (3 HP) 4-3 KW (4 HP) - 37 KW ( HP) Variation Code A - Discharge Head with 3 NPT Threads Flint & Walling. All rights reserved.

11 5 cm (6 in.) Submersible Pumps 6P SERIES 5 TO 3 HP-, 8 AND GPM Component Description Discharge Pump Shell Cable Guard Staging Stage Bearings Pump Shaft Suction Screen Motor Motor Controls MATERIAL CONSTRUCTION 6X Series with Plastic Impellers 5 and 3 m3/hr (8 and GPM) 3.7 through KW (5 through 3 HP) Cast iron with closed sintered lead free sleeve bearing, 3 NPT 34 heavy wall stainless steel 3 stainless steel Axial mixed flow, fiberglass Noryl impellers and diffusers. Acetal diffuser plate Stainless steel thrust sleeve and marine rubber bearing in each stage 46 stainless steel 9 mm (3/4 ) hex drive shaft with one piece stainless steel motor-to-shaft coupling and snap ring retainer Corrosion resistant 34 stainless steel All pumps are driven by a complete selection of single or three phase water lubricated motors. Order motors separately. Control boxes required for single phase motors. Magnetic starters and heaters required for three phase motors. Order controls separately Replacement cartridge assembly available for 6P Series pumps. Includes all necessary parts to restore pumps to like-new performance *Noryl is a registered trademark of General Electric Flint & Walling. All rights reserved.

12 Pump Performance Curves 5 m 3 /h (6X8) HZ Pump Performance Curves Head (ft) 4 3 Head (m) kw (7 / HP)- 8 Stage EFF Flow (m 3 /h) % Efficiency CONVERTED USING THE AFFINITY LAWS FROM 6 HZ. AND VERIFIED FROM 5 HP 4 STAGE HZ. TEST Flow (gpm) /7/94 RC IL683 3 m 3 /h (6X) HZ Pump Performance Curves Head (ft) 4 Head (m) kw ( HP)-5 Stage EFF % Efficiency Flow (m 3 /h) CONVERTED USING THE AFFINITY LAWS FROM 6 HZ. AND VERIFIED FROM 5 HP STAGE HZ. TEST Flow (gpm) /7/94 RC IL684 Flint & Walling. All rights reserved.

13 Jet Pumps CPHX SERIES.5 through.55 KW (/3 through 3/4 HP) CPH CONVERTIBLE Includes: Pump, Motor and Pressure Switch. Order Ejector, Control Package and Pressure Gauge Separately. CPHX PRODUCT FEATURES High tensile gray iron pump bodies with large water cavities for fast, easy priming. Separate priming ports enable quick water fill and the fast evacuation of air. Separate /4 tappings are provided for the convenient mounting of pressure/vacuum gauges and the pressure switch, and for pump draining. Buna-N quadraseal is reusable and provides a positive seal between the pump case and motor bracket. Molded diffusers are corrosion and abrasion resistant and provide precision alignment with the impeller for maximum performance. The snap-in diffuser design uses no bolts and is held in place by compression. Molded thermoplastic impellers on.5 through.55 KW (/3 through 3/4 HP) CPH models. Precision balanced, these impellers are ultra-smooth for high efficiency. F&W Service Plus Uni- Frame Flange, 56 Frame Motor Buna - N Quadraseal Thermoplastic Impeller All pipe plugs and priming plugs are coated with a nonhardening, non-toxic, non-corrosive material which allows for easy removal even after the pump has been in service for years. Standard shaft seal with ceramic and carbon face is selfadjusting throughout the seal life. One size fits all models. Patented uni-frame motor bracket used on CPH is unique to the water systems industry and is designed to accept any NEMA J motor if motor replacement is ever necessary. Automatic overload senses both start and run winding heat to ensure complete winding protection. Glass-Filled Diffuser Order Separately for Deep Well Applications KW (/3-3/4 HP) Control Package Rigid Steel Base Standard 6 mm (5/8 ) Ceramic Faced Rotary Seal Pressure Switch.5 KW (/3 HP) - 5V S.P KW (/ - 3/4 HP) - 5/3V C.S. Flint & Walling. All rights reserved. 3

14 Service Plus F&W Motors Service Plus means top reliability plus quick access to all electrical components. Routine maintenance is simplified through the convenient mounting of electrical components. Removal of the rear access cover exposes components for fast replacement. Spade connectors enable quick hookup and voltage change. Zinc Clad Fan Access Cover Switch Rear access cover Directs ventilating air over the windings and bearings, and away from the switch mechanism. All electrical components are protected from dirt, dust and insects. Quality-wound double insulated stator Uses nylon over coated wire with an additional varnish dip to insure against moisture penetration. Class B wire insulation rated for 66 F. Dynamically Balanced Rotor Double Ball Bearings Zinc Clad Shell Permanently lubricated ball bearings Located on each end of the motor insuring alignment of the dynamically balanced rotor for smooth operation and extended motor life. Overload Capacitor Fully enclosed transfer switch Mounted on a UL recognized thermo-set plastic board utilizes spark quenching and extra large silver cadmium oxide contact points. Patented governor Features an advanced simplified design, using a stainless steel compression spring to insure proper motor RPM before switching from start to run windings. Zinc clad steel shell and cooling fan Resist corrosion and dissipate motor heat. Automatic overload Senses both start and run winding heat to ensure complete winding protection. Service Plus motors Manufactured by Flint & Walling, Inc. in Kendallville, IN, USAAn industry exclusive among jet pump manufacturers. Governor Switch C US UL Std. No. 778 Flint & Walling. All rights reserved. 4

15 Pump Performance Charts SHALLOW WELL CATALOG PERFORMANCE DATA JET PUMP WITH SHALLOW WELL EJECTOR MODEL KW HP EJECTOR ASSEMBLY CPHX3.5 /3 SW3E4 CPHX5.37 / SW5E54 CPHX7.55 3/4 SW7E63 Suction & Discharge: -/4 x SUCTION LIFT CAPACITIES m 3 /hr (GPH) at DISCHARGE PRESSURE (PSI) SHUT OFF PRESSURE M FT PSI PSI PSI PSI PSI Shallow Well Ejector SHALLOW WELL CATALOG PERFORMANCE DATA JET PUMP WITH CONVERTIBLE EJECTOR MODEL CPHX3 CPHX5 CPHX7 KW HP.5 /3.37 /.55 3/4 EJECTOR ASSEMBLY DW4E5 DW4E5 DW4E78 DW4E7 DW4E83 DW4E7 Suction & Discharge: -/4 x SUCTION LIFT M FT PSI PSI CAPACITIES m 3 /hr (GPH) at DISCHARGE PRESSURE (PSI) 4 PSI PSI PSI PSI PSI PSI PSI SHUT-OFF PRESSURE PSI Convertible Ejector Flint & Walling. All rights reserved. 5

16 Pump Performance Charts DEEP WELL CAPACITIES WITH 5. cm ( ) SINGLE PIPE PACKER Model KW HP Ejector Assy Minimum Operating Pressure Discharge Pressure 6. m Ft. 9. m Capacity m 3 /hr (GPH) and Shut Off () at Vertical Distance to Water 3 Ft.. m 4 Ft. 5. m Ft. 8.3 m 6 Ft..3 m 7 Ft. 4.4 m 8 Ft. 7.4 m 9 Ft. 3.5 m Ft m Ft. CPHX3.5 /3 SPBL5 5 SPBL Shut-off 4 Shut-off CPHX5.37 / SPBL SPBL Shut-off 4 Shut-off CPHX7.56 3/4 SPBL SPBL Shut-off 4 Shut-off Pressure Switch Setting ( - 4 ) DEEP WELL CAPACITIES WITH TWO PIPE CONVERTIBLE EJECTOR Model KW HP Ejector Assy Minimum Operating Pressure Discharge Pressure 6. m Ft. 9. m Capacity m 3 /hr (GPH) and Shut Off () at Vertical Distance to Water 3 Ft.. m 4 Ft. 5. m Ft. 8.3 m 6 Ft..3 m 7 Ft. 4.4 m 8 Ft. 7.4 m 9 Ft. 3.5 m Ft m Ft. CPHX3.5 /3 DW4E5 5 DW4E Shut-off Shut-off CPHX5.37 / DW4E DW4E Shut-off Shut-off CPHX7.55 3/4 DW4E DW4E Shut-off Shut-off Pressure Switch Setting ( - 4 ) Two Pipe Convertible Ejector 5. cm ( ) Single Pipe Ejector 6

17 CPHX Pump Repair Parts KILOWATTS HORSEPOWER /3 / 3/4 MODEL NO. CPHX3 CPHX5 CPHX7 ITEM DESCRIPTION PART NO. QTY. QTY. QTY. Motor, NEMA J (Thd) 98J3 98J5 98J7 Motor Access Cover 3 Screws, Access Cover 3 Motor Lead Wire 3635A 3 Mounting Ring Hex Hd. Cap Screws 3/8 x 3/ Ring, Sq. Cut Seal, Rotary w/spring 3 7 Impeller Diffuser Rubber, Diffuser 348 Pump Body Plug, Priming / NPT Base Pressure Switch 357 Standard Hardware Item Not Shown Flint & Walling. All rights reserved. 7

18 Jet Pump Accessories POWER CJ CONVERSION SERIES CENTRIFUGAL UNIT FOR PUMPS, JET AND PLASTIC CENTRIFUGAL IMPELLERS PUMPS Order No. 649 NEMA C NEMA J Application Can be used with any jet or centrifugal pump equipped with NEMA C or NEMA J standard electric motors. Gasoline engine or electric motor can be directly coupled with shaft or can be used with belt and pulley. For electric motor used with belt drive, the motor HP should be doubled. The gasoline engine HP should be double that of standard motor in either case above..6 cm (5/8 ) diameter steel shaft, mounted in two heavy duty ball bearings, carry all radial and thrust loads. WELL ADAPTERS FOR JET PUMP INSTALLATIONS Order No. Well Size Drop Pipe Suction Pipe Pressure Pipe cm in. cm in. cm in. cm in / /4 3. -/4.5 Description For single pipe ejector installations, Adapter bolts directly to face of horizontal pumps or can be offset from the well EJECTOR SPECIFICATIONS AND WELL ADAPTER SELECTION CHART Ejector Order No. SPBL SPCL Ejector Description 5. cm ( ) Brass, Leather 5. cm ( ) Cast Iron, Leather Ejector Drop Pipe Tapping 3. cm (-/4 )M Well Size / Drop Pipe 5. cm x 3. cm ( x -/4 ).5 cm ( )F 5. cm x.5 cm ( x ) Well Adapter Required Package Type No. 973 Rt. Angle Straight Rt. Angle 3 Double Pipe Deep Well Ejector DP3C SPCL SPCL SPBL Straight Adapter Right Angle Adapter SPCL 5. cm ( ) Cast Iron, Leather 3. cm (-/4 )M 5. cm x 3. cm ( x -/4 ) Straight Rt. Angle * cm (-/4 ) turned coupling required. Order separately. ** 3.8 to 3. cm (-/ to -/4 ) bushing required. Not furnished. Part No. 96 Description Adapter to match Sta-Rite vertical jet pump footprint to F&W VA, VS and VPH jet pumps without disturbing existing well plumbing Flint & Walling. All rights reserved. 8

19 Centrifugal Pumps CXJ SERIES - Single or Three Phase Featuring Flint & Walling s Exclusive Service Plus Motor FEATURES AND BENEFITS Multi-Stage for High Head Flint & Walling s Service Plus 56 frame, NEMA J, capacitor start, double ball bearing motor for continuous operation..37,.55 &.75 KW (/, 3/4 & HP) sizes with single or three phase options. Brass impellers. Rugged cast iron pump casing. Multi-stage for high head. Fast, easy service. Normal wearing parts are easily removed for service or replacement. Capacities to m 3 /hr (3, GPH). Pressures to 683 (99 ). NEMA J Flange 56 Frame Double Ball Bearings, Dual Voltage, Capacitor Motor Threaded Stainless Steel Pump Shaft Heavy Duty Cast Iron Mounting Ring Gasket Brass Impeller Spacer Sleeve Heavy Duty Cast Iron Intermediate Stage Gasket Heavy Duty Cast Iron Body Motor Mounting Ring Bolts Rigid Steel Base Assembly Standard 6 mm (5/8 ) Ceramic Faced Rotary Seal Brass Impellers IL59 Pump Through Bolts Flint & Walling. All rights reserved. 9

20 Pump Performance and Specifications TOTAL HEAD IN METERS TOTAL HEAD IN FEET CJ SERIES CXJ CENTRIFUGAL SERIES - Single PUMPS, or Three PLASTIC PhaseIMPELLERS kw ( HP).55 kw (3/4 HP).37 kw (/ HP) 4 U.S. GPM IMP. GPM CU. M/HR IL7 MODEL NO. KW HP PHASE DESCRIPTION CXJ3 SERIES CXJ33.5 /3 / Volt CXJ35.37 / / Volt CXJ /4 / Volt CXJ3.75 / Volt CXJ SERIES CXJB5.37 / / Volt CXJB7.55 3/4 / Volt CXJB.75 / Volt SPXJ SERIES SPXJ5P.37 / / Volt SPXJ7B.55 3/4 / Volt SPXJB.75 / Volt CX SERIES CX3L. 3 / V CX33L. 3 3 /44 V CX5L /44 V CX53L /44 V Flint & Walling. All rights reserved.

21 Repair Parts CXJ SERIES IL59 ITEM Motor, NEMA J - PH Motor Access Cover Screws, Access Cover Slinger Washer Shaft Mounting Ring Hex Hd. Cap Screws 3/8 x 3/4 Seal, Rotary w/spring Impeller Spacer, Shaft Gasket Intermediate Stage Assy.* Suction Clearance Ring Hub Clearance Ring Suction Flange Assy. Suction Clearance Ring Hex Hd. Cap Screws 3/8 x 3/4 Base Consult Factory KW SINGLE PHASE HORSEPOWER / 3/4 STAGES MODEL NO. CXJB5 CXJB7 CXJB DESCRIPTION QUANTITY PART NO. PART NO. PART NO. Not Shown * Piece Intermediate Stage Assy. Obsolete, Piece construction only option Suction & Discharge Tapping -/ x -/ J A B A J A B A J A B A Flint & Walling. All rights reserved.

22 Centrifugal Pumps CJ SERIES CXJ3 CENTRIFUGAL SERIES - Single PUMPS, or Three PLASTIC Phase IMPELLERS Featuring Flint & Walling s Exclusive Service Plus Motor FEATURES AND BENEFITS Flint & Walling s Service Plus 56 Frame, NEMA J, capacitor start, double ball bearing motors for continuous operation..5,.37,.55 and.75 KW (/3, /, 3/4 and HP) sizes with single or three phase options Brass impellers electronically balanced. Rugged volute type casing. Discharge can be rotated to any one of four positions for horizontal or vertical installation. Fast, easy service when necessary. Normal wearing parts are easily removed for service and replacement without disturbing the suction or discharge piping. Single Stage for Economy TOTAL HEAD IN METERS TOTAL HEAD IN FEET kw ( HP) 5.37 kw (/ HP).55 kw (3/4 HP) 4.5 kw (/3 HP) U.S. GPM IMP. GPM CU. M/HR. IL73 Flint & Walling. All rights reserved.

23 Repair Parts CXJ3 Series IL47 KW ITEM SINGLE PHASE HORSEPOWER /3 / 3/4 STAGES MODEL NO., CXJ33 CXJ35 CXJ37 CJX3 PART NO. DESCRIPTION QUANTITY PART NO. PART NO. PART NO. PART NO Not Shown Motor, NEMA J - PH Motor Access Cover Screws, Access Cover Slinger Washer Mounting Ring Hex Hd. Cap Screws 3/8 x 3/4 Seal, Rotary w/spring Impeller Gasket - Square cut o-ring Body Assy. Suction Clearance Ring Base 4 98J J J J Flint & Walling. All rights reserved. 3

24 Centrifugal Pumps. and 3.7 KW (3 and 5 HP) Single or Three Phase Two Stage The CX Series is a rugged pump built for extra performance. Nationally known NEMA JM motors. Electronically balanced brass impellers. Capacities to 4 m3h (6,4 GPH). Pressures to 48 (6 PSI) 7.6 cm (3 ) Suction CX Series Ref No. Description Heavy-duty NEMA JM motor., 3.7 KW (3, 5 HP) Heavy duty cast iron mounting ring 3 3. cm (-/4 ) Rotary seal 4 Gasket 5 Heavy duty cast iron Intermediate stage Ref No. Description 6 Heavy duty cast iron body 7 Motor mounting bolts 8 Electronically balanced brass impellers 9 Brass impeller retainer and stainless steel lockscrew Pump through bolts Product not exactly as shown Flint & Walling. All rights reserved. 4

25 Pump Performance CX Model Number Phase 3 Phase KW HP Stages 38 PSI 7 3 PSI 76 Capacity - ( Lift) Discharge Pressures 4 PSI 345 PSI PSI 44 m 3 /hr GPM m 3 /hr GPM m 3 /hr GPM m 3 /hr GPM m 3 /hr GPM m 3 /hr GPM 6 PSI Suction Pipe Tap NPT Discharge Pipe Tap NPT CX3 CX CX5 CX MOTOR VOLTAGE: Phase, V, Hz, 3 Phase /44 V, Hz Maximum Case Pressure 87 ( PSI) Flow(gpm) CX3 4 CX Head (Meters) 5 75 Head (Feet) Flow (m 3 /hr) IL7 Flint & Walling. All rights reserved. 5

26 Lawn Sprinkler Pump.37 through.75 KW (/ through HP) SINGLE OR THREE PHASE SPXJ SERIES SELF-PRIMING C US UL Std. No. 778 FEATURES High capacity, high volume Cast iron pump body and mounting ring for long life Flint & Walling s Service Plus NEMA J, capacitor start, double ball bearing motors for continuous operation.37,.55 &.75 KW (/, 3/4, & HP) sizes, with single or three phase options Easy access drain plug Designed for lawn sprinkling, irrigation and more Rapid self-priming characteristics under maximum suction conditions F&W Service Plus NEMA J Flange, Double Ball Bearing, Dual Voltage Motor Heavy Duty Cast Iron Mounting Ring Standard 5/8 Carbon/silicon carbide Rotary Seal Buna-N Quadraseal Impeller* Thermoplastic Diffuser Cast Iron Pump Case with Drain Tapping Rigid Steel Base * 3/4 - -/ HP Impeller - Noryl -/ - 3 HP Impeller - Brass Flint & Walling. All rights reserved. 6

27 Pump Performance Curves SPXJ SERIES TOTAL TOTAL HEAD IN HEAD IN METERS FEET kw ( HP).55 kw (3/4 HP) kw (/ HP) U.S. GPM IMP. GPM CU. M/HR. IL74 Flint & Walling. All rights reserved. 7

28 Repair Parts CJ SERIES CENTRIFUGAL SPXJ SERIES PUMPS, PLASTIC IMPELLERS ITEM Motor, NEMA J - HP Motor Access Cover Screws, Access Cover 3 KILOWATT SINGLE PHASE HORSEPOWER / 3/4 MODEL NO. SPXJ5P SPXJ7B SPXJB DESCRIPTION QUANTITY PART NO. PART NO. PART NO. Slinger, Washer Mounting Ring Hex Hd. Cap Screws 3/8 x 3/4 Ring, Square Cut Seal, Rotary w/ Spring Impeller, Plastic P Models Impeller, Plastic B Models Diffuser Hex Hd. Cap Screws /4 x Rubber Diffuser Pump Body Hex Hd. Cap Screws 7/6 x Base Hex Hd. Cap Screws 3/8 x / Not Shown Suction & Discharge Tapping: x -/ J J J Flint & Walling. All rights reserved. 8

29 Pressure Booster Pump PB SERIES STANDARD OR STAINLESS STEEL For City Mains and Private Water Systems Booster Pump with Flint & Walling, NEMA J Motor, Standard or Stainless Steel Models. PRESSURES TO 379 ( PSI) The Pressure Booster Pump is designed to increase water pressure from city mains or private water systems. Applications include pressure cleaning, spray or mist systems, jockey pumps, booster service, reverse osmosis, water circulation and general purpose pumping. Series GPM Stages Construction Code Y = Stainless Steel Z = Powder Coated Cast Iron X = Cast Iron Horsepower 3 =.5 KW (/3 HP) 5 =.37 KW (/ HP), etc. Phase = Phase 3 = 3 Phase MODEL NUMBER CODE PB 5 Y 5 Flint & Walling. All rights reserved. 9

30 Pressure Booster Pump Component Description CJ SERIES CENTRIFUGAL MATERIAL CONSTRUCTION PUMPS, PLASTIC IMPELLERS Stainless Steel Models,.5,, 4, 5, & 7 m3/hr (5, 7,, 9, 7 & 35 GPM).5 through. KW (/3 through 3 HP) Powder-coated Models,.5,, 4, 5, & 7 m3/hr (5, 7,, 9, 7 & 35 GPM).5 through. KW (/3 through 3 HP) Cast Iron Models,.5,, 4, 5, & 7 m3/hr (5, 7,, 9, 7 & 35 GPM).5 through. KW (/3 through 3 HP) Suction and Discharge Casting 34 (CF-8) stainless steel Powder coated cast iron Cast Iron Pump Shell 34 heavy wall 34 heavy wall 34 heavy wall stainless steel stainless steel stainless steel Staging* Noryl impellers and diffusers; type 34 stainless steel floating bearing inserts and acetal diffuser plates Noryl impellers and diffusers; type 34 stainless steel floating bearing inserts and acetal diffuser plates Noryl impellers and diffusers; type 34 stainless steel floating bearing inserts and acetal diffuser plates Pump Shaft and Motor Coupling Assembly 33 stainless steel hex shaft with 36 SS motor to shaft coupling 46 stainless steel hex shaft with 36 SS motor to shaft coupling 46 stainless steel hex shaft with 36 SS motor to shaft coupling Shaft Seal Carbon-silicon carbide, stainless steel spring, Carbon-silicon carbide, stainless steel spring, Carbon-silicon carbide, stainless steel spring, and Viton and Buna-N and Buna-N O-Rings Viton Buna N Buna-N Open drip proof (ODP) and Totally enclosed fan cooled (TEFC) motors available with single or three phase options. C US Motor UL Std. No. 778 * Replacement cartridge assembly available for all models. Includes all necessary parts to restore pumps to like-new performance. No special tools required. Noryl is a registered trademark of General Electric. Viton is a registered trademark of Dupont. Single Phase.5 -. KW (/3 - -/ HP) - /;.5 KW ( HP) -, Hz Motor voltage: Three Phase KW (/ - HP) - 8-3/46, /6 Hz For three phase models, use suffix 3 on the model no. Example: PB5Y53 Motor Mechanical Seal Assembly Shell Discharge Head Mounting Frame O Ring Cartridge Assembly IL7 O Ring Flint & Walling. All rights reserved. 3

31 Pump Performance Curves PB SERIES m3/hr (5 GPM) m 3 /hr Pressure Added () PB54 PB GPM Pressure Added (Meters) IL685.5 & m3/hr (7 & GPM) m 3 /hr Pressure Added () PB PB PB74 PB3 5 5 GPM CAUTION: To keep pump and seal lubricated, a minimum flow of.3 m 3 /hr (.5 GPM) must always be maintained through the pump Pressure Added (Meters) IL686 Flint & Walling. All rights reserved. 3

32 Pump Performance Curves CJ SERIES CENTRIFUGAL PUMPS, PLASTIC IMPELLERS 4 & 5 m3/hr (9 & 7) GPM m 3 /hr Pressure Added () PB9 PB GPM Pressure Added (Meters) IL687 7 m3/hr (35 GPM) m 3 /hr Pressure Added () PB354 PB Pressure Added (Meters) GPM CAUTION: To keep pump and seal lubricated, a minimum flow of.3 m 3 /hr (.5 GPM) must always be maintained through the pump. IL688 Flint & Walling. All rights reserved. 3

33 Pump Specifications PB SERIES - PRESSURE BOOSTER PUMPS KW HP STAGES MOTOR TYPE KG SHIP WT. LBS. SINGLE PHASE STANDARD MODEL NO. POWDER COATED MODEL NO. STAINLESS STEEL MODEL NO..5 /3 8 ODP PB8X3 PB8Z3 PB8Y3.37 / 4 ODP PB54X5 PB54Z5 PB54Y5 TEFC PB54Z5T PB54Y5T.55 3/4 4 ODP PB74X7 PB74Z7 PB74Y7 TEFC PB74Z7T PB74Y7T.75 ODP PBX PBZ PBY TEFC PBZT PBYT.75 ODP PBX PBZ PBY TEFC PBZT PBYT.75 3 ODP PB3X PB3Z PB3Y TEFC PB3ZT PB3YT. / ODP PB9X5 PB9Z5 PB9Y5 TEFC PB9Z5T PB9Y5T.5 ODP PB9Z PB9Y.5 7 ODP PB77X PB77Z PB77Y TEFC PB77ZT PB77YT. / 35 ODP PB38X5 PB38Z5 PB38Y5 TEFC PB38Z5T PB38Y5T TEFC PB354X3T PB354Z3T PB354Y3T KW HP STAGES MOTOR TYPE KG SHIP WT. LBS. THREE PHASE STANDARD MODEL NO. POWDER COATED MODEL NO. STAINLESS STEEL MODEL NO..75 ODP PBX3 PBZ3 PBY3 TEFC. 49. PBZ3T PBY3T.75 ODP PBX3 PBZ3 PBY3 TEFC.7. PBZ3T PBY3T.75 ODP PB3X3 PB3Z3 PB3Y3 TEFC PB3Z3T PB3Y3T. / ODP PB9X53 PB9Z53 PB9Y53 TEFC.7. PB9Z53T PB9Y53T.5 7 ODP PB77X3 PB77Z3 PB77Y3 TEFC PB77Z3T PB77Y3T. 3 4 TEFC PB354X33T PB354Z33T PB354Y33T SUCTION & DISCHARGE NPT 3/4 x 3/4 x SUCTION & DISCHARGE NPT 3/4 x 3/4 x Flint & Walling. All rights reserved. 33

34 Repair Parts PB SERIES - PRESSURE BOOSTER PUMPS IL7 6 STANDARD BOOSTER PUMP KILOWATT HORSEPOWER /3 / 3/4 -/ 3 CAST IRON POWDER COATED SINGLE PHASE THREE PHASE SINGLE PHASE THREE PHASE MODEL NO PB8X PB54X PB74X7 - - PBX3 PBX - - PBX3 PBX PBZ3 PBZ - - PB3Z3 PB3Z PB3X3 PB3X PB38X5 - - PB9X53 PB9X5 PB9Z53 PB9Z PB9Z - - PB354X33T PB354X3T PB354Z33T PB354Z3T - - ITEM DESCRIPTION PART NO. QUANTITY Motor, PH NEMA J Motor, 3 PH NEMA J Motor Access Cover Screws, Access Cover Handle Hex Hd. Cap Screws 3/8 x Seal, Rotary w/spring - Carbon Barrel Discharge Head - Cast Iron Discharge Head - Powder Coated O-Ring, Buna N Cartridge Assembly Shaft & Coupling Assembly Mounting Ring - Cast Iron Mounting Ring - Powder Coated Hex Hd. Cap Screws 3/8 x 3/4 3R J J J7 385 * J 98J J 98J J 98J J 98J J J5 98J (*) Consult factory ( ) Cartridge assembly includes: Impeller, Diffusers, Shaft & Coupling Assembly. Components not available individually. Sold as assembly only. ( ) Not shown 98J5 98J J Flint & Walling. All rights reserved. 34

35 Repair Parts PB SERIES - PRESSURE BOOSTER PUMPS IL7 6 STAINLESS STEEL BOOSTER PUMP KILOWATT HORSEPOWER /3 / 3/4 -/ 3 SS SINGLE PHASE THREE PHASE MODEL NO. PB8Y3 - PB54Y5 - PB74Y7 - PBY PBY3 PBY PBY3 PB3Y PB3Y3 PB9Y5 PB9Y53 PB9Y - PB77Y PB77Y3 PB354Y3T PB354Y33T ITEM DESCRIPTION PART NO. QUANTITY Motor, PH NEMA J Motor, 3 PH NEMA J Motor Access Cover Screws, Access Cover 3R 3 Handle 379 Hex Hd. Cap Screws 3/8 x 7 3 Seal, Rotary w/spring - Viton Barrel 5 Discharge Head - Stainless Steel 6 O-Ring - Viton Cartridge Assembly 8 Shaft & Coupling Assembly 9 Mounting Ring - SS Hex Hd. Cap Screws 3/8 x 3/4 6 (*) Consult factory 98S S S * * S 98S S 98S S 98S S5 98S ( ) Cartridge assembly includes: Impeller, Diffusers, Shaft & Coupling Assembly. Components not available individually. Sold as assembly only. ( ) Not shown 98S S8 98S Flint & Walling. All rights reserved. 35

36 Air-E-Tainer Well System Tanks Vertical, Horizontal and In-line Well System Tanks In-line tanks pre-charged for 3- pressure switch - Vertical tanks precharged for either 3 - or 4 6 Pressure switch PSI maximum working pressure Powder-coated exterior and interior Butyl rubber parabolic diaphragm 5 year Limited Warranty In-line Tanks Vertical Tanks Horizontal Tank Part No. Drawdown-Liters(gal.) by kpa() settings*** Factory Max Total Tank Approx. Size Ship Wt Max Working Precharge Working Vol. Liters Dia x Ht Lbs Pressure (PSI) Liters Liters by Gal. PSIG Temp Gal. by by NPT Size/ by 38/ 7/ Gal. by by /4 MTL Liters Gal. 76/ / PSI 4/6 PSI 44 PSI cm in kg lbs PSI C F A* x x x x x x x x x x /4 x -/5 x 4-3/4 5-3/8 x 4-3/4 5-/3 x 6-7/ 5-3/8 x 3-/4 x 38-5/8 3-3/8 x 38-5/8 3-3/8 x 46-3/5 3-3/8 x 59 6 x 6-/ /4 M /4 M F /4 M F F /4 F /4 F /4 F /4 F *With pump stand. In keeping with current industry standards, drawdown factors are based on Boyle s law. Actual drawdowns will vary depending upon system variables, including the accuracy and operation of the pressure switch and gauge and operating temperature of the system. Caution: install a pressure relief valve on any installation where the pump pressure can exceed the tank s maximum working pressure. NOTE: Precharged tanks cannot ship via air freight. Flint & Walling. All rights reserved. 36

37 Air-E-Tainer Pre-Pressurized Well System Tanks Air-E-Tainer Features. AIR CHARGE VALVE Conveniently located for easy pressure adjustment Projection-welded for durability. DESIGNER FINISH High gloss exterior powder coat Provides positive protection against corrosion and UV rays Standard 7/345 (3/ PSI) System These illustrations show the operation of the Air-E-Tainer tank in a typical 7/345 (3/) PSI pressure range. A. Tank is pre-pressurized with air at the factory. 7 3PSI BUTYL RUBBER PARABOLIC DIAPHRAGM Eliminates rubbing on the tank wall or rolling over on itself 4. STEEL SHELL 5. STEEL RETAINING RING 6. POWDER-COATED WATER CHAMBER Proven protection against internal corrosion 7. CORROSION- RESISTANT BASE High-impact polymer material Strong and stable for long life Base rotates for easy alignment to pipe connection Slotted and noted for air flow, reduced condensation buildup B. When pump starts, water enters the reservoir. At 345 ( ), system is filled. Pump shuts off. C. When water is demanded, pressure in the air chamber forces water into the system. Pump turns on. D. When pressure in tank drops to pressure switch cut-in point 7 (3 ) pump refills the tank as in Illustration B. 7 3PSI 345 PSI 3 45 PSI A 345 PSI B 3 45 PSI C IL94B Flint & Walling. All rights reserved. 37

38 Tanks & Accessories AIR-E-TAINER PUMP STAND Order No. 345 Application For Mounting Jet Pumps On Top Of 366, 366, 3663, 3357, 36875, 3546 and Air-E- Tainer Tanks FITTING PACKAGES. FOR JET PUMP/PRESSURE TANK MOUNTED SYSTEMS Fittings Pkg Order No For Use With Pumps Well System Tanks 366 Vertical Air-E-Tainer /3 & / HP Shallow Well and 366 Vertical Air-E-Tainer Convertible Horizontal Jet Pumps 39 Compact Air-E-Tainer 3477 Compact Air-E-Tainer Package Contents Nipples, Elbows, Discharge Tee, Hose, Clamps and Pump Stand (345) Nipples, Elbows and Discharge Tee PRESSURE TANK ACCESSORIES AIR VOLUME CONTROL - DIAPHRAGM TYPE Charges standard pressure tanks with air on each operating cycle. Maintains the correct relationship between the volume of air and quantity of water in the tank. MAX. TANK CAPACITY ORDER NO. NPT TYPE Liter Gal. 395 /4 AV45 Non-Repairable /8 AV Non-Repairable * 3/8 AV Package 454 *Includes AV, /4 x 38 Tube & Fittings Non-Repairable AV Package AIR VOLUME CONTROL - FLOAT TYPE Maintains the correct relationship between the volume of air and quantity of water in the pressure tank. ORDER NO. NPT TYPE 396 /4 Shallow Well Less Gauge PRESSURE RELIEF VALVE Order No. NPT Release Pressure 39 / Capacity PSI m3/hr GPH 4.5 at 483 at 7 PSI NOTE: Install a Pressure Relief Valve with any pump capable of producing more than 75 PSI at the tank. Flint & Walling. All rights reserved. 38

39 Tanks & Accessories AIR VALVES Order No. NPT Description 395 /4 Allows admittance of air to any pressure system JET PUMPS/TANKS SYSTEM FITTINGS Order No. Description 8.5 x.6 cm ( x 8-/ ) Hose x 86.4 cm ( x 34 ) Hose TANKS AND ACCESSORIES POWER CONVERSION UNIT FOR JET AND CENTRIFUGAL PUMPS Order No. 649 NEMA C NEMA J Application Can be used with any jet or centrifugal pump equipped with NEMA C or NEMA J standard electric motors. Gasoline engine or electric motor can be directly coupled with shaft or can be used with belt and pulley. For electric motor used with belt drive, the motor HP should be doubled. The gasoline engine HP should be doubled that of standard motor in either case above. 5 mm (5/8 ) Dia. steel shaft, mounted in two heavy duty ball bearings, carry all radial and thrust loads. TURNED COUPLING/GALVANIZED Order No. Size NPT 95 -/4 WELL POINT Order No. Size Screen Length Gauge cm in. cm in x 76. -/4 x x 9.4 -/4 x TOUCH-UP PAINT Order No. Description F&W Blue Spray Can DRIVE COUPLINGS Order No Description 3. cm (-/4 ) Coupling for 3. cm (-/4 ) Drive Pipe Flint & Walling. All rights reserved. 39

40 Tanks & Accessories WELL ADAPTERS FOR JET PUMP INSTALLATIONS Order No. Description Well Size Drop Pipe Suction Pipe Pressure Pipe cm in. cm in. cm in. cm in /4.5 Right Angle /4 3. -/ /4.5 Straight /4 3. -/ Adapter to match Sta-Rite vertical jet pump footprint to F&W VA, VS and VPH jet pumps without disturbing existing well plumbing Right Angle Adapter Straight Adapter 96 WELL SEALS Order No. Description Well Size Suction Pipe Pressure Pipe cm in. cm in. cm in. 366 Single Pipe Jet Installation / Double Pipe Jet Installation / / / Single Pipe Submersible Installation with Cable Seal / /4 - - Single Pipe Jet Single Pipe Submersible Double Pipe Jet Flint & Walling. All rights reserved. 4

41 Tanks & Accessories SUBMERSIBLE PUMP FITTINGS FOR AIR-E-TAINER AND OTHER CONTAINED AIR TANKS Brass Tank Cross, Pressure Switch 7/345 (3/ PSI), Pressure Gauge, / Pressure Relief Valve, Check Valve, / Boiler Drain Order No. 38 Description Complete Package- Low Lead A Dimensions Inches NPT cm in. B C D E 5.4 /4 M x 3/4 F / D C B 393 Tank Cross Only 5.4 /4 M x 3/4 F / A E SUBMERSIBLE TORQUE ARRESTOR Eliminates damage to submersibles due to high starting torque. Order No. Description 34 Adjustable to well casings from cm to cm (4 to 8 ) ID SUBMERSIBLE CABLE GUARD Prevents power cable from abrading against side walls of well casing. Order No. Description 3498 Fits 5 cm (6 ) well-cut tabs for use in cm and.7 cm (4 and 5 ) wells HEAT SHRINK SPLICE KIT Order No. Wire Sizes 34 #4, #, # #8, #6 Flint & Walling. All rights reserved. 4

42 Tanks & Accessories ELECTRICAL ACCESSORIES LIGHTNING ARRESTORS Part No. Description 73 Franklin, spark gap -Phase Volts (Max.) required. 65 F&W metal oxide varistor, -phase, 4 volt max. - required BW WATER LEVEL CONTROL - Type G Part No. Description Qty Required 97 Control, 8-3V, /6 Hz, NEMA, pump up or pump down 5748 Type LH Relay Rated HP, Single Phase, 8-4V, /6Hz 7835 Electrode Suspension Wire -5 m ( Ft.) Reels * *No cut length. LEAD WIRES FOR FLINT & WALLING MOTORS Motor Diameter Order No. Description cm im/ Wire, Plain One End,.9 cm (48 ) 4 AWG Wire, Plain One End,.9 cm (48 ) 4 AWG PUMPSAVER PLUS Single Phase Motor Protection Control Type HP Volts P/N Wt. PumpSaver Insider / PumpSaver Plus /3 - -/ / / Flint & Walling. All rights reserved. 4

43 Tanks & Accessories SUBMERSIBLE ACCESSORIES PRESSURE SWITCHES SWITCH SETTING MAXIMUM ELECTRICAL RATING BOTTOM ORDER SINGLE PHASE THREE PHASE CONNECTION NUMBER PSI NPT 5V 3V 5V KW HP KW HP KW HP /4 M.75. -/ /4 M. -/ * /4 F.75. -/.5 NOTE: All switches are two pole. *Indicates low pressure cut off. OPEN TANK FLOAT SWITCH Order No. 57 Switch only (heavy duty) Description Max. Switch Ratings Qty. Required.5 KW ( HP), V, PH. KW (3 HP), 4V, PH 3.7 KW (5 HP), 4V, 3 PH 573 Float 574 Float rod 5.4 cm (6 ) long 3566 Stop, rod (rubber) 4 For complete switch, order all parts in quantity as listed above. CHECK AND FOOT VALVES Check ValvesSpring Controlled, General Service for Jet, Submersible or Centrifugal, for Horizontal or Vertical Application. ORDER NO. NPT CAN BE USED IN PIPE SIZE cm in FPT x -/4 MPT 5. FOOT Valves Spring Controlled, Jet or Centrifugal, For Vertical Application ORDER NO. NPT WELL PIPE SIZE cm in / / / Flint & Walling. All rights reserved. 43

44 Terms And Conditions ACCEPTANCE OF ORDERS: All orders are subject to acceptance by Flint & Walling, Inc. in Kendallville, Indiana, and to conditions stated herein. Acceptance of F&W product order constitutes acceptance of the terms and conditions stated herein. Flint & Walling, Inc. will not be bound by any term or condition on buyer s order which is different from or in addition to the terms and conditions of Flint & Walling. SHIPPING POLICY: All prices are based upon product sold F.O.B. point of shipment. Flint & Walling will prepay and absorb transportation charges to common carrier points within the continental limitations of the United States, Alaska and Hawaii excluded, in accordance with the freight policy outlined in the Distributor Discount Schedule; and provided Flint & Walling is allowed to select point of origin of shipment, method of transportation and routing of the shipment. Flint & Walling, Inc. reserves the right to add a shipping surcharge due to heavy weight, oversize dimensions, non-pump product mix and/or large order quantities with an order that qualifies for prepaid freight outlined in the Distributor Discount Schedule. SHIPPING CLAIMS: Flint & Walling, Inc. is not responsible for any damage or loss of any shipments after surrendering shipment to carrier in good order and original bill of lading to customer. Claims for loss or damage to products in transit must be made to the carrier by the purchaser within 5 working days after receipt of product, regardless of whether products are shipped prepaid or collect. All damage and/ or shortages must be documented on the Proof of Delivery. No claims for shortages in quantity will be honored by Flint & Walling, Inc. unless presented within 5 working days after receipt of goods. PRICES: While every effort will be made to provide customers advance notice of price changes, all prices and discounts are subject to change without notice. Flint & Walling reserves the right to refuse any order due to a price change or price discrepancy; and acceptance of such order by Flint & Walling is subject to customer acceptance of the revised current price. CANCELLATION: Orders accepted by Flint & Walling in Kendallville, Indiana are not subject to cancellation; but, where cancellation for any cause is mutually agreed to, the purchaser will be billed for reasonable charges based on expenses already incurred and commitments made by Flint & Walling. TERMS OF PAYMENT: % 3 days, Net 45 days. Accounts past due will be subject to a /% monthly interest charge. Payments made with a credit card will have a 4% transaction fee applied with no cash discounts. SALES TAX EXEMPTION: F&W is required to have a current sales tax exemption certificate on file for your company. If you have multiple stores or branches that we ship to in other states, please provide a MTC (Multistate Tax Commission) exemption certificate. It is your responsibility to provide the correct form for your state. Failure to provide your sales tax exemption certificate will result in sales tax being charged on your order. RETURNING PRODUCT: Authorization and shipping instructions must be obtained from Flint & Walling by the purchaser before returning any product. A 5% handling and restocking charge will be charged for new product returned to Flint & Walling for credit. Noncataloged product is not returnable. EXPORT COMPLIANCE POLICY: All Flint & Walling products sold outside of the Continental United States are subject to the standards and regulations set forth by the Bureau of Industry and Security. Please consult with the factory on any product that is intended to be exported outside of the United States. See FW333 for additional information. Continued on page. Flint & Walling. All rights reserved. 44

45 Terms And Conditions LIMITED WARRANTY: This product is warranted, unless otherwise stated, to the user to be free from defects in material and workmanship for a period of one () year from the date of purchase or two () years from the date of manufacture, whichever is less. To obtain service under this warranty, contact any authorized dealer or return any component which fails during this warranty period to the factory, freight prepaid. Components showing unmistakable signs of defects in material or workmanship will be repaired or replaced without charge and returned, freight prepaid. All Parts & Accessories carry a 9 day warranty from date of purchase. Complete warranty program details available in Bulletin FW83. THE WARRANTY PROVIDED HEREIN IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES, AND MAY NOT BE EXTENDED OR MODIFIED BY ANYONE. ANY IMPLIED WARRANTIES SHALL BE LIMITED TO THE PERIOD OF THIS LIMITED WARRANTY, AND THEREAFTER ALL SUCH IMPLIED WARRANTIES ARE DISCLAIMED AND EXCLUDED. FLINT & WALLING SHALL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, SUCH AS, BUT NOT LIMITED TO, DAMAGE TO, OR LOSS OF, OTHER PROPERTY OR EQUIPMENT, LOSS OF PROFITS, INCONVENIENCE, LABOR, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY TYPE OR NATURE. THE LIABILITY OF FLINT & WALLING SHALL NOT EXCEED THE PRICE ON THE PRODUCT UPON WHICH SUCH LIABILITY IS BASED. This Warranty gives you specific legal rights, and you may have other rights which vary from state to state. Some states do not allow limitations on duration of implied warranties or exclusion of incidental or consequential damages, so the above limitations may not apply to you. If you have any questions concerning this or any of our policies and procedures, please do not hesitate to contact your Sales Representative. IMPORTANT NOTICE TO OWNER This warranty shall become effective only in the event Flint & Walling s warranty registration card has been properly completed by the original retail purchaser and returned to Flint & Walling within ten () days of the date of purchase. Proof of purchase may be required to obtain warranty. Flint & Walling. All rights reserved. 45

46 Contacts Jason Meyer...International Sales Manager... Ext. 859 Jason Nett...International Marketing & Sales Manager... Ext. 865 Dale Dueffert...International Product Support... Ext. 859 Emily McKinney...International Customer Support... Ext. 87 International Phone Number International International Sales Fax Number International Correspondence Fax Number Technical Service Sales Department Flint & Walling. All rights reserved. 46

47 Notes Flint & Walling. All rights reserved. 47

48