2 x type 2 socket, 1-phase, max. 1x32A input, RCD type A, 6mA detection, Display

Transcription

1 General Model name Product no. 2 x type 2 socket, 1-phase, max. 1x32A input, RCD type A, 6mA detection, Display x type 2 socket, 1-phase, max. 2x32A input, RCD type A, 6mA detection, Display x type 2 socket, 3-phase, max. 1x32A input, RCD type A, 6mA detection, Display x type 2 socket, 3-phase, max. 2x32A input, RCD type A, 6mA detection, Display Packaging Unit (PU) Package contents charge point 1 piece ICU Eve, installation manual, wall mounting bracket and installation materials, RFID charge cards (depends on model) Options for configuration Ex-factory settings Authorisation Maximum charging current per outlet Smart charging options Company logo in display Supported languages Availability for user in case of no back office connection Back office system Communication via Options Plug & Charge RFID 16A 32A Off Standard load balancing (between sockets) Active load balancing (P1) Maxem (combined with ICU Connect UTP) Off (Alfen logo) On (customised logo) English, Dutch, German, French Accept all RFID cards Only accept cards in white list Not available ICU Connect Various other systems upon request GPRS, UTP/LAN Auto-detect

2 Input and power supply 1-phase 3.7kW charging, 16A selected per phase : 3 x 4 mm : 3 x 4 mm 2 (per cable) Input: advised minimum cable size (assuming feeder cable with maximum length of 50m) 3-phase 11kW charging, 16A selected per phase : 5 x 4 mm : 5 x 4 mm 2 (per cable) 1-phase 7.4kW charging, 32A selected per phase : 3 x 6mm : 3 x 6 mm 2 (per cable) 3-phase 22kW charging, 32A selected per phase : 5 x 6 mm : 5 x 6 mm 2 (per cable) Nominal current Protection 230 V ( , ) 400 V ( , ) Single feeder cable, 1 phase: 1 x 40 A max 2P Dual feeder cable, 1 phase: 2 x 40 A max 2P Single feeder cable, 3 phase: 1 x 40 A max 4P Dual feeder cable, 3 phase: 2 x 40 A max 4P If you have chosen a maximum charging capacity of 16A (3.7kW or 11kW), a protection of 20A instead of 40A is sufficient. Nominal frequency Connection terminals Earthing Mains switch 50 Hz Glands, suited for cables of 17mm up to 25.5mm Supported diameter of cable terminals: max. 16 mm 2 per core TN-system: PE-wire, TT-system, PME-system 4-poles, 80 A, 400 V ( , , ) 8-poles, 40 A, 400 V ( ) Output and connection to vehicle Connection Output voltage Max. charging capacity Max. output Load balancing 2 x type 2 socket, in accordance with IEC V ( , ) 400 V ( , ) 32 A per phase 7.4 kw per outlet ( , ) 22 kw per outlet ( , ) Optional

3 Protection and integrated components Earth leakage protection Energy meter Relay Type A 30mA, per outlet DC residual current detection >6mA, per outlet 1x kwh-meter per outlet, MID-certified Integrated, simultaneous activation Surge protection Integrated in firmware; shut down at: 105% after 1000 seconds; 110% after 100 seconds; 120% after 10 seconds; 150% after 2 seconds Charging and status indicators Controllers Central unit for outlets and communication Communication with vehicle Mode 3 Status indication Display Card reader Internet / network options Communication protocol Back office connection Communication with Smart Meter Integrated in display 7 TFT colour display Resolution: 800x480 pixels RFID (NFC) ISO/IEC 14443A, Mifare MHz, DESFire GPRS, Ethernet/ LAN (externally accessible) OCPP 1.5 (JSON) OCPP 1.6 (JSON) ICU Connect (optional) or other back office system (upon request) DSMR 4.0 and higher via P1 port (RJ11/RJ12) Standards and guidelines Standards IEC (), IEC (), Renault Z.E. Ready Guidelines

4 Conditions of use Operating temperature -30 C to 40 C Relative humidity 5 % to 95 % Protection class Ingress Protection Rating (housing) IK protection Stand-by power consumption I IP54 IK10 Approximately 9-12W Housing Type Installation method Material (cover) Colour (cover) Material (housing) Colour (housing) Closure Wall mounted Wall mounting or post (accessory) Fiberglass-reinforced polyester (Sheet Moulding Compound - SMC) RAL 9016 (Traffic White) Fiberglass-reinforced (Sheet Moulding Compound - SMC) RAL 7043 (Traffic Gray) Anti-theft screws 590 x 338 x 230 mm Approximately 25kg Packaging Dimensions packaging charge point (H x W x D) including packaging 250 x 740 x 350 mm Approximately 31 kg

5 Accessories Mounting post Material Colour Packaging dimensions (H x W x D) Concrete base Metal base Packaging dimensions (H x W x D) Extra RFID card 1,430 x 180 x 80 mm Aluminium with powder coating RAL 7043 (Traffic Gray) 1,460 x 360 x 280 mm 11 kg ICU 570 x 350 x 220 mm 42 kg ICU 598 x 204 x 300 mm 7.8 kg 50 x 295 x 620 mm ICU