THE ADVANCED-SERIES THE ALL-EMBRACING CHARGING CONCEPT.

Transcription

1 THE ADVANCED-SERIES THE ALL-EMBRACING CHARGING CONCEPT.

2 ADVANCED FEATURES AT A GLANCE. 1 Illuminated sliding cover with status LED 2 Also available with attached charging cable 3 Maintenance and installation-optimised front access 4 Space for SAM (storage and display module) is already prepared* 5 UMTS modem OCPP 1.5/1.6 JSON 6 Electrical component covered when door is open, access for non-electrician possible 7 Local energy demand management 8 Connection via main switch 9 SMC housing: light, durable, impact-resistant, weatherproof, fire-extinguishing and leakage current protected 10 Available as BM, GM & WM/PM percent of the housing can be laminated 12 Maximum safety through HRA (Hardware based redundant shutdown) 13 Weight 45 kg * for invoicing models that conform to calibration law ** WM: Wall Mounted PM: Post Mounted GM: Ground Mounted BM: Base Mounted

3 ADVANCED COMMUNICATION AND TECHNOLOGY. The further development of the long established ADVANCED series convinces with new features. Its slim and innovative design, coupled with the highest level of intelligence, makes it the optimal supply system for the charging infrastructure. Information exchange requires the use of intelligent charging stations. This is exactly what our charging stations of the ADVANCED series offer. They are ideal for charging in public areas and for charging vehicle fleets or in semi-public car parks. The ADVANCED charging stations have already proven themselves in use many times. Especially the latest version of the series, with its discreetly illuminated connector area and practical sliding cover, is becoming a bestseller on the electromobility market. Its comfortable "one-handed operation" has been successfully tested in practice. Another new feature is the optimized locking mechanism of the service door - the charging station can be opened from the front (front access). It is therefore very easy to maintain and can be installed in a space-saving manner. In order to enhance the front view of the charging station - also for customer-specific designs - we will soon have realised the swing lever inconspicuously on the side of the housing. For an efficient charging system, the ADVANCED charging station has an interface to connect to OCPP-based backend systems. The system is, as common for charging stations of the ADVAN- CED series, equipped with the most modern communication features and safety technology.

4 TECHNICAL DATASHEET ADVANCED. General information: Model name: Advanced BM, WM & GM Charging mode: Mode 3 Number of charging points: 2 Uni-lacquering in RAL 9003 (white, silk matt) Design: optional foil design, high quality lacquering in RAL tone as desired Hot-pressed, glass-fibre reinforced polyester Housing: (SMC) 1399x400x221 mm Product dimensions BM (HxWxD): 1003x400x221 mm Product dimensions WM (HxWxD): 1316x400x221mm height above ground Product dimensions GM (HxWxD): 1996mm height incl. premanufactured base Swing lever, prepared for holding a profile Locking system: half-cylinder Weight BM: ca. 45 kg Weight WM: ca. 32 kg Weight GM: ca. 38 kg Type 2 sockets with sliding cover Automatic locking when charging is started Charging point: and unlocking at the end and accordingly in case of power failure. Optional: Charging cable type 1 or 2 with rubber coating (length 4m) SAM (Storage and Display Module) SMC prefabricated base Options: RAL-tone as requested High quality varnish Partial and full foliation Communication & status indication Modem: Communication protocol: Authentication option: Status indication: UMTS OCPP 1.5 / 1.6 JSON RFID RGB LED with sliding cover optional display (4-line)

5 Electrical specifications Nominal voltage, nominal frequency: Maximum input current: Grounding system: Connecting terminals: Protections: Output power (per charging point): Meter (per charging point): 230V AC / 400V AC, 50/60 Hz 33A 3~/ 65A 3~ (depends on charging capacity) TN / TT 5-pole connection via main switch (2.5-35mm 2 ) and PE terminal 2 x RCD type A 2 x DC fault current detection 6mA 2 x MCB 1 x MCB for control unit 11kW / 22kW (configurable) 2 x MID compliant Smart Meter (incl. window) Working conditions Standards/guidelines IP degree of protection: IP44 Mechanical impact resistance: IK10 Operating temperature: -25 to +40 Standards: DIN EN 61851, DIN EN PRODUCT DIMENSIONS Erdgleiche Erdgleiche BM version * Concrete base optionally available GM version WM version

6 EBG compleo GmbH An der Wethmarheide Lünen Germany T: F: Subject to technical changes and errors excepted V2018_V