THE ADVANCED FLEET FOR FLEET AND CAR POOL INSTALLATION-OPTIMIZED AND RELIABLE.

Size: px

Start display at page:

Download "THE ADVANCED FLEET FOR FLEET AND CAR POOL INSTALLATION-OPTIMIZED AND RELIABLE."

Paul Lindsey
5 years ago
Views:

1 THE ADVANCED FLEET FOR FLEET AND CAR POOL INSTALLATION-OPTIMIZED AND RELIABLE.

2 THE ALL-EMBRACING CHARGING CONCEPT. ADVANCED FLEET FEATURES AT A GLANCE. 1 Low installation effort 2 Up to 50 percent cost savings during installation 3 Integrated busbar system Connection up to Ø 95 mm2 (BM, GM) or Ø 50 mm2 (WM, PM) 4 Individual equipment options 5 Available as WM/PM, GM, BM* 6 Easily expandable 7 With attached, spiral charging cable (4m) or type 2 socket outlet with sliding cover 8 Demountable / easy to dismantle 9 Ready for energy demand management 10 Flexible layout of the fleet parking spaces 11 Minimized space requirements in the sub-distribution system 12 Planning, implementation from a single source if requested THE ADVANCED-SERIES For further technical information of the ADVANCED series, please refer to the corresponding product data sheet ADVANCED. * WM - Wall Mounted PM - Pole Mounted GM - Ground Mounted = Installation on integrated SMC base BM - Base Mounted = Installation on prefabricated concrete base

The fleet stations with their millions of charging processes have been used successfully for many years, e. g.

3 THE FLEET SYSTEM MANY VEHICLES - MANY POSSIBILITIES. Whenever many vehicles need to be charged at one location or the vehicle fleet needs to be operated partially or fully electrically, our fleet system is the ideal charging solution! The fleet stations with their millions of charging processes have been used successfully for many years, e. g. by leading logistics companies and parking lots of renowned vehicle manufacturers, and are one of the most widely used systems on the fleet market. ECONOMICAL Up to 50% less installation investment can be realized. This is also ensured by our integrated busbar system, which can be combined with large cable cross-sections and therefore eliminates the need for expensive star cabling. It also reduces the space required in the subdistribution. The variant of the multi-function pipe system combines cable routing, demarcation of car parks and parking spaces and fixture of the stations in one. Earthworks and cable laying are reduced to a minimum and offer easy dismantling, e. g. for rental or leased objects. FUTURE-PROOF Prepared for more. Your fleet is growing? Our Fleet System grows, too. Additional branches are possible at each charging station with sufficient connected load. In this way, extensions can be implemented quickly and economically, even retrospectively, with professional configuration. FLEXIBLE Ready for any requirement. Equipped with the communication features of the ADVANCED series, the stations can be connected to all OCPP-based backend systems and are available with attached charging cable or type 2 socket with sliding cover. The housings of the charging stations are available for wall, floor or post mounting and allow a flexible design of your parking space. PLAN, INSTALL, IMPLEMENT Your project in good hands. Our experienced project team accompanies the planning and execution on request from the very beginning and takes care of the following tasks details that matter! With over 4,000 charging points installed, the Fleet System is the most successful system in the fleet business in Europe, especially designed to meet the requirements of fleet operation. Contact us - we will be happy to advise you!

INSTALLATION OPTIONS PM, WM, BM & GM. 50mm 2 50mm 2 Pole mounted (PM) Wall mounted (WM) Sample Configuration Charging capacity per charging point: 3.7 kw Max. cable cross section: 50mm² Max.

4 INSTALLATION OPTIONS PM, WM, BM & GM. 50mm 2 50mm 2 Pole mounted (PM) Wall mounted (WM) Sample Configuration Charging capacity per charging point: 3.7 kw Max. cable cross section: 50mm² Max. number of charging points: 20 Max. number of charging points: 42 Charging capacity per charging point: 11 kw Max. cable cross section: 50mm² Max. number of charging points: 8 Max. number of charging points: 14 95mm 2 Installation on prefabricated concrete base (BM) Installation on integrated SMC base (GM) Sample Configuration Charging capacity per charging point: 3.7 kw Max. cable cross section: 95mm² Max. number of charging points: 30 Max. number of charging points: 60 Charging capacity per charging point: 11 kw Max. cable cross section: 95mm² Max. number of charging points: 10 Max. number of charging points: 22

5 ELECTRIFICATION IN SEVERAL STAGES OF EXPANSION. BUILDING P BESUCHER Expansion stage 1 Expansion stage 3 Expansion stage 2

6 EBG compleo GmbH An der Wethmarheide Lünen Germany T: F: Subject to technical changes and errors excepted V2018_V

THE ADVANCED-SERIES THE ALL-EMBRACING CHARGING CONCEPT.

THE ADVANCED-SERIES THE ALL-EMBRACING CHARGING CONCEPT. ADVANCED FEATURES AT A GLANCE. 1 Illuminated sliding cover with status LED 2 Also available with attached charging cable 3 Maintenance and installation-optimised