Release of Updated Training Standard Log Book
|
|
|
- Duane Douglas
- 5 years ago
- Views:
Transcription
1 Release of Updated Training Standard Log Book Trade Name and Code Implementation Date of New Standard Implementation Plan 282E Powered Lift Truck Technician October 28, 2016 Apprentices who began their apprenticeship on the former 2002 Training Standard can complete their program using that standard. Apprentices who begin their apprenticeship on or after October 28, 2016 must complete their program using this version of the 282E training standard. On or after October 28, 2016, any apprentice who loses his or her training standard must be trained to and completed with the new standard even if they began their apprenticeship with the 2002 version. Impact on Curriculum Standards or Related Trades Training Standard Access As of October 28, 2016: The new Log Book will be available on the Ontario College of Trades website at collegeoftrades.ca/training-standards. The College will mail a printed Log Book to each apprentice who becomes a new member of their Apprentices Class in the Powered Lift Truck Technician trade when they are mailed their Apprentice s Statement of Membership card. If the Apprentice wants a copy of the Log Book before receiving the printed copy in the mail, the apprentice can download/print a copy from the College s website.
2 Skill(s) or Skill Set(s) Amalgamated and/or Amended The former Skill Set 5862 Electrical (Internal Combustion) - Starting and Charging: Name changed to: Starting, Charging and Electrical Code changed to: 5863 Rationale: Internal combustion was only removed from the Skill Set name and integrated into the skill section. The Working Group determined it was not necessary in the Skill Set name The former Skill Sets 5864 Fuel and 5865 Engine Management : Combined these two Skill Sets into one Skill Set Name changed to: Engine Management, Fuel and Emission Control Code changed to: 5865 Rationale: The Working Group decided that due to overlapping skills, these areas should be combined. Also, changes were made as there are advancements in technology covering fuel and Engine Management systems in internal combustion trucks. Emissions have been added since it is a significant Environmental issue. The former Skill Sets 5866 Clutches and Transmissions and 5867 Drive Axle and Final Drive Assemblies and 5874 Drive Unit Electric Vehicles: Combined these three Skill Sets into one Skill Set Name changed to: Transmission, Drive Axle and Final Drive and Components Code changed to: 5866 The former Skill Sets 5868 Steering and 5871 Suspension and 5880 Pneumatic Tires and Wheels and 5881 Solid Tires and Wheels: Combined these four Skill Sets into one Skill Set Name changed to: Steering and Suspension and Tires and Wheels Code changed to: 5867 The former Skill Sets 5869 Braking and 5870 Air Supply and Auxiliary Air : Combined these two Skill Sets into one Skill Set Name changed to: Braking Code changed to: 5868
3 Optional Skills Become Mandatory Mandatory Skills Become Optional Skill Sets or Skills added (NEW) Within Skill Set 5865 Engine Management, Fuel and Emission Control : Electronically-controlled diesel common rail systems Rationale: Powered Lift Truck Techs now work on Electronicallycontrolled diesel common rail systems and therefore these skills need to be added for apprentices to be prepared for the industry. Within Skill Set 5865 Engine Management, Fuel and Emission Control : Emission control systems Rationale: Advancements in technology covering fuel and Engine Management systems required more skills in emissions work as this continues to be a major environmental issue. Within Skill Set 5868 Braking : Electro-magnetic braking systems Rationale: Advancements in technology in braking systems requires that apprentices be trained on electro-magnetic braking systems skills to be prepared to work in this industry. Within Skill Set 5873 Frame, Overhead Guards and Cab : Overhead guards Rationale: Advancements in technology requires that apprentices be trained on overhead guards and this was missing from the existing standard but it is important to include it in the skills that apprentices need to be trained on. NOTE: The Working Group requested that all applicable legislation and/or regulations (i.e. jurisdictions having authority) are listed in this Apprenticeship Training Standard: Occupational Health and Safety Act (OHSA) Reg and 71 Underwriter s Laboratories of Canada (UL) UL-558 and UL-583 Canadian Standards Association (CSA) Standard B Safety Standards for Lift Trucks Technical Standards & Safety Authority (TSSA) Technical Standards and Safety Act, 2000, Ontario Regulation 215/01 Fuel Industry Certifications S.13, An Internal Combustion Alternate Fuel Technician-Industrial Equipment = ICE-IE Certificate Ontario Ministry of Labour - Guideline for the Safe Operation and Maintenance of Powered Lift Trucks American National Standards Institute (ANSI)/The Industrial Truck Standards Development Foundation (ITSDF) - ANSI/ITSDF B56.1 Safety Standard for Low Lift and High Lift Trucks International Organization for Standardization (ISO) : Industrial Truck 3
4 Key terminology amendments The Motive Vehicle Repairer Act The Mining Act Environmental Protection Act All instances of repair changed to repair/replace All instances of verify repair changed to verify repair/replacement All instances of batteries in the Skill Set 5863 Starting, Charging and Electrical changed to starting batteries All instances of automatic transmissions changed to powershift transmissions All instances of suspension systems changed to active suspension systems Skill Set Heating, Ventilation and Air Conditioning changed to 5874 Climate Control Rationale: Terminology was changed to align with changes in the industry as well as technological advancements in the Powered Lift Truck Industry. In some instances, content was changed to better align with the 421A Heavy Duty Equipment Technician products since Powered Lift Truck Technician trades shares some common core skills with Heavy Duty Equipment Technicians. Skill(s) or Skill Set(s) Removed General Notes This is a provincial trade (not Red Seal) that shares common in-school training with Heavy Duty Equipment Technician, Agricultural Equipment Technician and Truck and Coach Technician 22 Skill Sets reorganized into 15 Skill Sets Rationale: The Working Group determined that there were many opportunities for reordering, restructuring and regrouping the Skill Sets due to several inter-related skills. This creates a more efficient Training Standard and ensures optimal flow from one competency to the next for the apprentice. Major content changes made throughout document driven by industry changes including technological changes 4
5 Existing Skill Sets: 1. U Occupational Health and Safety Procedures 2. U Manufacturer s Specification Plate 3. U Electrical (Internal Combustion) - Starting and Charging 4. U Engine 5. U Fuel 6. U Engine Management 7. U Clutches and Transmissions 8. U Drive Axle and Final Drive Assemblies 9. U Steering 10. U Braking 11. U Air Supply and Auxiliary Air 12. U Suspension 13. U Batteries 14. U Electric Motor 15. U Drive Unit- Electric Vehicles 16. U Control - Electric Vehicles 17. U Hydraulic System 18. U Lifting 19. U Heating, Ventilation and Air- Conditioning 20. U Frame and Cab 21. U Pneumatic Tires and Wheels 22. U Solid Tires and Wheels New Skill Sets: 1. U Occupational Health and Safety Procedures 2. U Manufacturer s Specification Plate 3. U Batteries 4. U Starting, Charging and Electrical 5. U Engine 6. U Engine Management, Fuel and Emission Control 7. U Transmission, Drive Axle and Final Drive and Components 8. U Steering and Suspension and Tires and Wheels 9. U Braking 10. U Electric Motor 11. U Control Electric Vehicles 12. U Hydraulic 13. U Lifting 14. U Frame, Overhead Guards and Cab 15. U Climate Control 5
Section 1 explains the Harmonization Initiative and the methodology used to arrive at the proposed recommendations;
PROPOSED HARMONIZATION RECOMMENDATIONS HEAV DUT EQUIPMENT TECHNICIAN TRUCK AND TRANSPORT MECHANIC AGRICULTURAL EQUIPMENT TECHNICIAN 1. CONTEXT The purpose of this report is to review current jurisdictional
Apprenticeship Training Standard. Heavy Duty Equipment Technician. Trade Code: 421A
Apprenticeship Training Standard Heavy Duty Equipment Technician Trade Code: 421A Development Date: June 2002 CONTENTS PAGE Competency Analysis Profile Preface... 1 Important Directions to Employer/Sponsors
Heavy vehicle service and maintenance technician standard: Employer Occupational Brief
Heavy vehicle service and maintenance technician standard: Employer Occupational Brief July 2016 Competence expectations at gateways There are three gateway competency points in the bus and coach engineering
OFFICIAL PROGRAM STANDARDS NOTIFICATION Issued: February 24, 2012
OFFICIAL PROGRAM STANDARDS NOTIFICATION Issued: February 24, 2012 Program: Motorcycle Mechanic (Motorcycle & Power Equipment Technician) To: ITA Training Providers Automotive Training Standards Organization
Apprenticeship Training Standard Log Book
Apprenticeship Training Standard Log Book Heavy Duty Equipment Technician 421A What Is This About? The Apprenticeship Training Standard Log Book identifies all the skills associated with your trade in
LIFT TRUCK POLICY AND PROGRAM
LIFT TRUCK POLICY AND PROGRAM Table of Contents 1.0 Policy Statement and Program Overview... 4 2.0 Lift Truck Applicable Legislation, Guidelines and Standards... 4 3.0 Forklift Program Requirements...
Work Experience Form Automotive Service Technician
2011 - National Occupational Analysis (NOA) Work Experience Form Automotive Service Technician 1-877-978-7233 www.manitoba.ca/tradecareers Personal Information (please print) Legal First Name Middle Initial
CAREER PROFILES. Forklift driving Time management Heavy equipment operation Organizational skills Critical thinking Adaptability Bilingual Management
CAREER PROFILES Transport Truck Driver: Transport Truck Drivers operate heavy trucks to transport goods and materials over urban, interurban, provincial, and international routes. They also operate logging
Mandatory Entry Level Training for Class 1 drivers Agriculture industry
Mandatory Entry Level Training for Class 1 drivers Agriculture industry Mandatory Entry Level Training (MELT) for commercial drivers Mandatory Entry Level Training (MELT) is a mandatory training program
Work Experience Form Heavy Duty Equipment Technician
2014 - National Occupational Analysis (NOA) Personal Information (please print) Work Experience Form Heavy Duty Equipment Technician 1-877-978-7233 www.manitoba.ca/tradecareers Legal First Name Middle
Transit Bus Technician
COMPETENCY-BASED OCCUPATIONAL FRAMEWORK FOR REGISTERED APPRENTICESHIP Transit Bus Technician ONET Code: 49-3031.00 RAPIDS Code: 2073CB Created: January 2018 Updated: This project has been funded, either
15,500 lb Capacity Diesel Pneumatic Tire Forklift Truck
15,500 lb Capacity Diesel Pneumatic Tire Forklift Truck Raw Power: The FD70E is designed to work in demanding outdoor applications, moving oversized loads, such as steel bars, concrete pipe, cargo containers
Diesel Pneumatic Tire Lift Truck. Capacity: 15,500 lb
Diesel Pneumatic Tire Lift Truck Capacity: 15,500 lb DP70E Operator Friendly Tough environments require tough equipment. Cat lift trucks are built for harsh, rugged applications, without sacrificing operator
FGC35K-FGC70K 7,000 15,500 LB CAPACITY CUSHION TIRE FORKLIFT
BUILT TO PERFORM IN DEMANDING APPLICATIONS. FGC35K-FGC70K 7,000 15,500 LB CAPACITY CUSHION TIRE FORKLIFT 1. Comfortable Enhanced Ergonomics From the full-suspension seat to its full tilt steering column,
Fuels Safety Division. Propane Code Adoption Document Amendment
Fuels Safety Division Ref. No.: Rev. No.: FS-201-12 1 Propane Code Adoption Document Amendment Date: December 1, 2012 Date: IN THE MATTER OF: THE TECHNICAL STANDARDS AND SAFETY ACT, 2000, S.O. 2000, c.
OUTDOOR POWER EQUIPMENT TECHNICIAN TRADE REGULATION
Province of Alberta APPRENTICESHIP AND INDUSTRY TRAINING ACT OUTDOOR POWER EQUIPMENT TECHNICIAN TRADE REGULATION Alberta Regulation 47/2001 With amendments up to and including Alberta Regulation 116/2016
8,000-12,000 lb Capacity Pneumatic Tire Forklift Trucks
8,000-12,000 lb Capacity Pneumatic Tire Forklift Trucks Built Tough: The FG40N performs well in outdoor environments where surface conditions are often rough, wet and dusty and loads include unprocessed
This page no longer exists on the MTO website, this is a copy http://www.mto.gov.on.ca/english/pubs/recreational-vehicles/frequently-asked-questions.shtml Search Home About the Ministry News Publications
Apprenticeship Training Standard Log Book
Apprenticeship Training Standard Log Book Motorcycle Technician 310G What Is This About? The Apprenticeship Training Standard Log Book identifies all the skills associated with your trade in Ontario. It
LP Gas Cushion Tire Lift Trucks. Capacity: 7,000-15,500 lb
LP Gas Cushion Tire Lift Trucks Capacity: 7,000-15,500 lb GC35K-GC70K (STR) Series Designed to increase efficiency, the GC35K- GC70K Series of internal combustion cushion tire lift trucks provides maximum
REAL POWER. REAL SOLUTIONS. 3,000 4,000 LB. CAPACITY 3-WHEEL ELECTRIC PNEUMATIC TIRE LIFT TRUCKS
REAL POWER. REAL SOLUTIONS. 3,000 4,000 LB. CAPACITY 3-WHEEL ELECTRIC PNEUMATIC TIRE LIFT TRUCKS 2 TOTAL CONTROL Delivering Premium Performance The Cat EP16PNT-EP20PNT electric pneumatic tire series is
Work Experience Form Diesel Engine Mechanic - Rail Industry
2011 - Provincial Occupational Analysis (POA) Personal Information (please print) Work Experience Form Diesel Engine Mechanic - Rail Industry 1-877-978-7233 www.manitoba.ca/tradecareers Legal First Name
CUSHION TIRE FORKLIFT 3,000-6,500 LB CAPACITY LP GAS MODELS COMFORT AND CONVENIENCE YOU CAN RELY ON
CUSHION TIRE FORKLIFT 3,000-6,500 LB CAPACITY LP GAS MODELS COMFORT AND CONVENIENCE YOU CAN RELY ON COMFORT COMES STANDARD. STEP INTO THE OPERATOR COMPARTMENT OF AN FGC15N-FGC33N CUSHION TIRE FORKLIFT
INDUSTRY-LEADING PERFORMANCE 8,000 12,000 LB. CAPACITY INTERNAL COMBUSTION PNEUMATIC TIRE LIFT TRUCKS
INDUSTRY-LEADING PERFORMANCE 8,000 12,000 LB. CAPACITY INTERNAL COMBUSTION PNEUMATIC TIRE LIFT TRUCKS 2 STRENGTH THAT YOU CAN DEPEND ON Built To Perform Designed to operate in tough environments, the Cat
Electric Cushion Tire Lift Trucks. Capacity: 3,000-4,000 lb
Electric Cushion Tire Lift Trucks Capacity: 3,000-4,000 lb E3000-EC4000 Series Top Performance Demanding applications call for tough equipment. Cat lift trucks are built for diverse, rugged applications
LP Gas Cushion Tire Lift Trucks. Capacity: 3,000-6,500 lb
LP Gas Cushion Tire Lift Trucks Capacity: 3,000-6,500 lb 2C3000-2C6500 Series Dependable Performance Engineered for maximum performance in a wide range of industries, the 3,000-6,500 lb capacity internal
Bus and coach engineering technician standard: Employer Occupational Brief
Bus and coach engineering technician standard: Employer Occupational Brief July 2016 Competence expectations at gateways There are three gateway competency points in the bus and coach engineering technician
Appendix A: Authorization to Work around Energized Overhead Conductors Form... 7 Appendix B: Revision Notes & Approvals... 8
of 8 Training Code: (If Applicable) Document Owner Name: Brian Koltun Position: Process Superintendent Department: Ontario Operations, Power Department TABLE OF CONTENTS. PURPOSE... 2 2. APPLICATION...
Internal Combustion Pneumatic Tire Lift Trucks. Capacity: 8,000-12,000 lb
Internal Combustion Pneumatic Tire Lift Trucks Capacity: 8,000-12,000 lb GP40N1-GP55N1/ DP40NM1-DP55NM1 Series Cat lift trucks set the standard for the ultimate lifting experience. Exceptional comfort,
FILE / AUTOMOTIVE TECHNICIAN TRAINING PRODUCT CATALOG
27 April, 2018 FILE / AUTOMOTIVE TECHNICIAN TRAINING PRODUCT CATALOG Document Filetype: PDF 397.61 KB 0 FILE / AUTOMOTIVE TECHNICIAN TRAINING PRODUCT CATALOG Become an Automotive Service Technician. Students
9,000 lb. Forklift w/tire Changing Attachment (Propane) Req. 18-GA Georgia Ports Authority. Section 3 - Performance Specs Page 1 of 7
In this Request For Sealed Bid, the "Required" column means that the bidder must comply with the specifications as indicated, or will be considered non-responsive. The specifications in the "Desired" column
Commercial CATALOGUE OF THE WEBSITE DATA FOR BODYBUILDER & CV REPAIRERS AVAILABLE AS DOWNLOADS
CATALOGUE OF THE WEBSITE DATA FOR BODYBUILDER & CV REPAIRERS AVAILABLE AS DOWNLOADS SECTION 1 EVENTS, NEWS, MEMBERSHIP SERVICES & GENERAL INFORMATION SECTION 2 GENERAL TECHNICAL & IVA SECTION 3 UN ECE
House of Commons Standing Committee on Agriculture and Agri-Food: Perception of Public Trust in the Canadian Agriculture Sector
Canadian Trucking Alliance CTA House of Commons Standing Committee on Agriculture and Agri-Food: Perception of Public Trust in the Canadian Agriculture Sector March 19th, 2019 Canadian Trucking Alliance
Vehicle Branding and Continuous Registration of Vehicles in Ontario for Licensed Limousines
STAFF REPORT ACTION REQUIRED Vehicle Branding and Continuous Registration of Vehicles in Ontario for Licensed Limousines Date: December 15, 2008 To: From: Wards: Reference Number: Licensing and Standards
EFFICIENCY AND POWER 3,000 4,000 LB. CAPACITY ELECTRIC PNEUMATIC TIRE LIFT TRUCKS
EFFICIENCY AND POWER 3,000 4,000 LB. CAPACITY ELECTRIC PNEUMATIC TIRE LIFT TRUCKS 2 A POWERFUL SOLUTION 3 Maximum Performance: Shift After Shift The Cat EPC3000 EP4000 series is designed for efficiency
MAXIMUM PERFORMANCE 4,500 6,500 LB. CAPACITY ELECTRIC CUSHION TIRE LIFT TRUCKS
MAXIMUM PERFORMANCE 4,500 6,500 LB. CAPACITY ELECTRIC CUSHION TIRE LIFT TRUCKS 2 MORE POWER. BETTER EFFICIENCY. Built For Your Operation Delivering high performance and efficiency, the Cat EC22N2-EC30LN2
PROVEN FLEXIBILITY 7,000 15,500 LB. CAPACITY INTERNAL COMBUSTION CUSHION TIRE LIFT TRUCK
PROVEN FLEXIBILITY 7,000 15,500 LB. CAPACITY INTERNAL COMBUSTION CUSHION TIRE LIFT TRUCK 2 UNCOMPROMISING PERFORMANCE Optimum Versatility Powered by a rugged PSI 4X 4.3 liter V6 EPA compliant engine, the
Transport Trailer Technician NOA (2008) Subtask to Unit Comparison
Transport Trailer Technician NOA (2008) Subtask to Unit Comparison NOA Subtask Task 1 Uses and maintains tools and equipment. 1.01 Maintains hand tools. A4 Shop/Hand/Measuring Tools and Equipment 1.02
Pneumatic Tire Forklift. 3,000-7,000 lb capacity LP Gas, Gasoline and Diesel models. Your go-to Pneumatic Tire Forklift Truck
Pneumatic Tire Forklift 3,000-7,000 lb capacity LP Gas, Gasoline and Diesel models Your go-to Pneumatic Tire Forklift Truck Comfort Comes Standard. Step into the operator compartment of an FG15N-FG35n
AUTOMOTIVE MANUFACTURING
REDESIGNED MODULES FOR THE SECTOR OF AUTOMOTIVE MANUFACTURING UNDER MODULAR EMPLOYABLE SKILLS (MES) Redesigned in - 2014 By Government of India Directorate General of Employment & Training Ministry of
RFP Agricultural Tractors (AG tractor) SCOPE OF THE PROPOSAL
Request for Proposal RFP Agricultural Tractors (AG tractor) 1. Introduction SCOPE OF THE PROPOSAL 1.1 The Ontario Federation of Snowmobile Clubs (OFSC) is accepting proposals for the purchase of Agricultural
The following document was obtained from the State of Indiana. This document may have changed since it was obtained. Please refer to the State's
The following document was obtained from the State of Indiana. This document may have changed since it was obtained. Please refer to the State's website for any updates at www.in.gov/bmv Indiana State
Welcome to the MOL Blitz webinar Locking & Tagging in Mine Hoisting Plants
Welcome to the MOL Blitz webinar Locking & Tagging in Mine Hoisting Plants Thank you for joining us! We will be getting started at 10:00 a.m. EST To access the audio portion of this webinar, please phone:
G6B 30/11/17 x G6C 27/07/17 1
CATALOGUE OF THE WEBSITE DATA FOR BODYBUILDER & CV REPAIRERS AVAILABLE AS DOWNLOADS SECTION 1 EVENTS, NEWS, MEMBERSHIP SERVICES, LEGAL & GENERAL INFORMATION SECTION 2 GENERAL TECHNICAL INFORMATION SECTION
Pneumatic Tire Forklift. 15,500 lb capacity LP Diesel models THE HEAVY-DUTY FORKLIFT BUILT TO HANDLE TOUGH LOADS
Pneumatic Tire Forklift 15,500 lb capacity LP Diesel models THE HEAVY-DUTY FORKLIFT BUILT TO HANDLE TOUGH LOADS Expect Productivity. Experience Enhanced Performance With A Powerful Low-Emissions Engine
40/50/55/60/70 IC-CUSHION LPG. 8,000 / 10,000 / 12,000 / 13,500 / 15,500 lbs. / 5000 / 5500 / 6000 /7000 kg)
CGC (4000 40/50/55/60/70 IC-CUSHION LPG 8,000 / 10,000 / 12,000 / 13,500 / 15,500 lbs. / 5000 / 5500 / 6000 /7000 kg) With four turns lock-to-lock the hydrostatic power steering provides the operator with
Apprenticeship and Industry Training
Apprenticeship and Industry Training Heavy Equipment Technician Apprenticeship Course Outline 019.2 (2012) ALBERTA ADVANCED EDUCATION AND TECHNOLOGY CATALOGUING IN PUBLICATION DATA Alberta. Alberta Advanced
20/25/30 IC-PNEUMATIC LPG/DIESEL
CQ 20/25/30 IC-NEUMATIC LG/DIESEL 4000 / 5000 / 6000 lbs. (2000 / 2500 / 3000 kg) With four and one half turns lockto-lock the hydrostatic power steering provides the operator with excellent maneuverability
LP Gas Cushion Tire Lift Trucks. Capacity: 7,000-15,500 lb
LP Gas Cushion Tire Lift Trucks Capacity: 7,000-15,500 lb GC35K-GC70K (STR) Series The GC35K-GC70K Series internal combustion cushion tire lift trucks provide maximum performance in a variety of applications
EFFICIENT DESIGN 3,000-4,000 LB. CAPACITY ELECTRIC CUSHION TIRE LIFT TRUCKS
EFFICIENT DESIGN 3,000-4,000 LB. CAPACITY ELECTRIC CUSHION TIRE LIFT TRUCKS 2 ALL-OUT PRODUCTIVITY Ready To Work For Your Business Built to maximize uptime, the Cat E3000-EC4000 electric cushion tire lift
Automotive Service Technician
Automotive Service Technician 2016 TRADE PROFILE AUTOMOTIVE SERVICE TECHNICIAN STRUCTURE OF THE TRADE PROFILE This profile has two sections that provide a snapshot of the trade s description, and all trade
The Effects of Mandatory Rider Training and Licensing Incentives on Motorcycle Rider Training Enrolment A Canadian Perspective
The Effects of Mandatory Rider Training and Licensing Incentives on Motorcycle Rider Training Enrolment A Canadian Perspective By Raynald Marchand National Coordinator Motorcycle Training Program, Manager,
PNEUMATIC TIRE FORKLIFT 8,000-12,000 LB CAPACITY LP GAS, GASOLINE AND DIESEL MODELS THE PNEUMATIC TIRE FORKLIFT THAT PULLS ITS WEIGHT
PNEUMATIC TIRE FORKLIFT 8,000-12,000 LB CAPACITY LP GAS, GASOLINE AND DIESEL MODELS THE PNEUMATIC TIRE FORKLIFT THAT PULLS ITS WEIGHT COMFORT COMES STANDARD. STEP INTO THE OPERATOR COMPARTMENT OF AN FG40N-FG55N
PNEUMATIC TIRE FORKLIFT 8,000-12,000 LB CAPACITY LP GAS, GASOLINE AND DIESEL MODELS THE PNEUMATIC TIRE FORKLIFT THAT PULLS ITS WEIGHT
PNEUMATIC TIRE FORKLIFT 8,000-12,000 LB CAPACITY LP GAS, GASOLINE AND DIESEL MODELS THE PNEUMATIC TIRE FORKLIFT THAT PULLS ITS WEIGHT COMFORT COMES STANDARD. STEP INTO THE OPERATOR COMPARTMENT OF AN FG40N1-FG55N1
NORTH AMERICAN STANDARDS FOR LOW-VOLTAGE FUSES
127 NORTH AMERICAN STANDARDS FOR LOW-VOLTAGE FUSES Dale A. Hallerberg, P.E. Underwriters Laboratories Inc. September 25, 1995 1 General 1.1 Abstract The ability of fuse manufacturers to access larger markets
Ontario s Electrical Product Approval Requirements
Ontario s Electrical Product Approval Requirements Before an electrical product or piece of electrical equipment is used, sold, displayed or advertised for sale in Ontario, it must be approved by an accredited
PNEUMATIC TIRE FORKLIFT 3,000-7,000 LB CAPACITY LP GAS, GASOLINE AND DIESEL MODELS YOUR GO-TO PNEUMATIC TIRE FORKLIFT TRUCK
PNEUMATIC TIRE FORKLIFT 3,000-7,000 LB CAPACITY LP GAS, GASOLINE AND DIESEL MODELS YOUR GO-TO PNEUMATIC TIRE FORKLIFT TRUCK COMFORT COMES STANDARD. STEP INTO THE OPERATOR COMPARTMENT OF AN FG15N-FG35N
Permit Type: Extended Drivers Hours of Service (Provincial)
Permit Type: Extended Drivers Hours of Service (Provincial) Under the provisions of Section 62 of the Alberta Traffic Safety Act, the Holder of this Permit is exempted from the requirements of sections
OVERHEAD DOOR TECHNICIAN OCCUPATION REGULATION
Province of Alberta APPRENTICESHIP AND INDUSTRY TRAINING ACT OVERHEAD DOOR TECHNICIAN OCCUPATION REGULATION Alberta Regulation 181/2014 With amendments up to and including Alberta Regulation 120/2018 Current
The Manitoba Workplace Injury Statistics Report
The Manitoba Workplace Injury Statistics Report 2000 2014 Table of Contents Acknowledgements... 2 Methodology Note on 2009 Extension of WCB Coverage and Change in Average Weekly Earnings... 2 Major Highlights
PNEUMATIC TIRE FORKLIFT 3,000-7,000 LB CAPACITY LP GAS, GASOLINE AND DIESEL MODELS YOUR GO-TO PNEUMATIC TIRE FORKLIFT TRUCK
PNEUMATIC TIRE FORKLIFT 3,000-7,000 LB CAPACITY LP GAS, GASOLINE AND DIESEL MODELS YOUR GO-TO PNEUMATIC TIRE FORKLIFT TRUCK COMFORT COMES STANDARD. STEP INTO THE OPERATOR COMPARTMENT OF AN FG15N-FG35N
Guidelines for Safety Training of Overhead Crane Operators and Supervisors
Guidelines for Safety Training of Overhead Crane Operators and Supervisors Purpose These guidelines present minimum recommended safety requirements for ensuring the safe and efficient operation of overhead
Electric Pneumatic Tire Lift Trucks. Capacity: 3,000-4,000 lb
Electric Pneumatic Tire Lift Trucks Capacity: 3,000-4,000 lb -EP4000 Series Combining the latest in operator ergonomics, advanced AC control systems and customized performance, the -EP4000 Series of four-wheel
MAXIMUM EFFICIENCY 4,500 6,500 LB. CAPACITY ELECTRIC CUSHION TIRE LIFT TRUCKS
MAXIMUM EFFICIENCY 4,500 6,500 LB. CAPACITY ELECTRIC CUSHION TIRE LIFT TRUCKS 2 THE POWER TO TACKLE YOUR TOUGHEST JOBS. Made For Your Operation Combining the latest in operator ergonomics and advanced
This section contains templates and/or examples of forms that pertain to a carrier s CVOR record: Collisions / Motor Vehicle Accident Report
APPENDIX F - Forms This section contains templates and/or examples of forms that pertain to a carrier s CVOR record: CVOR Applications Collisions / Motor Vehicle Accident Report Motor Vehicle Accident
Mine Hoist Hazards. The incidents over the past 10 years have been associated with causal factors such as, but not limited to:
Mine Hoist Hazards WSN Disclaimer The information contained in this material is provided as a guide only. WSN recognizes that individual companies must develop health and safety policies and programs which
DELIVERING MORE 7,000 11,000 LB. CAPACITY ELECTRIC PNEUMATIC TIRE LIFT TRUCKS
DELIVERING MORE 7,000 11,000 LB. CAPACITY ELECTRIC PNEUMATIC TIRE LIFT TRUCKS 2 MORE Moving Your Business Forward The 2EPC7000-2EP11000 series from Cat Lift Trucks is built to perform. Delivering all of
Program SLOs Automotive Mechanics Technology
Program SLOs Automotive Mechanics Technology A.A. Automotive Mechanics Technology Certificates of Achievement Automotive Mechanics Technology, Automotive Engine Performance, Automatic Transmissions/Transaxles,
SMART STRONG SAFE SMART STRONG SAFE
SMART STRONG SAFE Building on over 100 years of lift truck innovations, design and industry firsts. The evolution continues the CLARK S-Series, the next generation of lift trucks. SMART Our design standards
PNEUMATIC TIRE FORKLIFT 15,500 LB CAPACITY LP DIESEL MODELS
PNEUMATIC TIRE FORKLIFT 15,500 LB CAPACITY LP DIESEL MODELS THE HEAVY-DUTY FORKLIFT BUILT TO HANDLE TOUGH LOADS EXPECT PRODUCTIVITY. EXPERIENCE ENHANCED PERFORMANCE WITH A POWERFUL LOW-EMISSIONS ENGINE
Automotive. Degree Automotive Technology, Associate of Science
BAKERSFIELD COLLEGE 2018/2019 CATALOG Automotive Degree Automotive Technology, Associate of Science Certificates Auto Engine Overhaul and Repair, Auto Tune-Up and Emission, Automotive Heating, Ventilation
Automotive. Automotive Body and Repair
Automotive Body and Repair This program is designed to prepare the student for employment as a body repair and paint apprentice in privately owned repair shops or automotive dealerships. A student could
Recreational Off-Highway Vehicles
Canadian Off-Highway Vehicle Distributors Council Standard for Recreational Off-Highway Vehicles COHV 2-2017 Foreword This is the third edition of the recreational off-highway vehicle standard for off-road
Highly Maneuverable, Easily Serviceable, Broadly Flexible, Extremely Dependable
Foot steps with traction plates make entry/exit quick, easy and safe... from either side. The spacious operator compartment includes an easy to read color display. Real time information including error
SAMPLE. Engine Driven Welding Power Sources. Topic 5. Welding Process Training Series
Topic 5. Welding Process Training Series Engine Driven Welding Power Sources Prepared by the Miller Electric Mfg. Co. Training Department. 2014 Miller Electric Mfg. Co. The contents of this publication
Apprenticeship Curriculum Standard. Small Engine Technician, Marine Engine Technician & Turf Equipment Technician. Level 2 435A, 435B & 421C
Apprenticeship Curriculum Standard Small Engine Technician, Marine Engine Technician & Turf Equipment Technician 435A, 435B & 421C 2014 Please Note: Apprenticeship Training and Curriculum Standards were
THE UAW LOCAL 27 COLLECTION. 9 Manuscript Boxes. Processed: Accession No. 371 By: EM
THE UAW LOCAL 27 COLLECTION 9 Manuscript Boxes Processed: 6-10-70 Accession No. 371 By: EM The papers of Local 27 UAW were deposited with the Labor History Archives in 11-25-69 by Al Campbell. This is
Auto Service Technician
Auto Service Technician Organization Washburn Institute of Technology Program Number 47.0604 Instructional Level Certificate Target Population Grades 11 & 12 Post-secondary Description The Auto Service
SECTION 11 POWERED INDUSTRIAL TRUCKS
SECTION 11 POWERED INDUSTRIAL TRUCKS 11.1 Powered Industrial Truck Procedure 11.2 Forklift Inspection 11.3 Operator Performance Evaluation Checklist Revised: May 2009 Updated: November 2017 Reviewed: October
CATHODIC PROTECTION TECHNICIAN OCCUPATION REGULATION
Province of Alberta APPRENTICESHIP AND INDUSTRY TRAINING ACT CATHODIC PROTECTION TECHNICIAN OCCUPATION REGULATION Alberta Regulation 17/2013 With amendments up to and including Alberta Regulation 213/2017
Electric Cushion Tire Lift Trucks. Capacity: 3,000-6,500 lb
Electric Cushion Tire Lift Trucks Capacity: 3,000-6,500 lb E3000-E6500 Series Top Performance Demanding applications call for tough equipment. Cat lift trucks are built for diverse, rugged applications
7. Protection System Testing
MANUAL FOR INSTALLATION AND MONITORING OF UNDERGROUND STORAGE TANKS WITH FACTORY INSTALLED ANODES 1. SCOPE Manufactured by: Granby Industries 1020 André-Liné Granby, Québec, Canada, J2J 1J9. Telephone:
SUPERIOR RELIABILITY 3,000 6,500 LB. CAPACITY INTERNAL COMBUSTION CUSHION TIRE LIFT TRUCK
SUPERIOR RELIABILITY 3,000 6,500 LB. CAPACITY INTERNAL COMBUSTION CUSHION TIRE LIFT TRUCK 2 TRIED-AND-TRUE PERFORMANCE 3 A Truck You Can Depend On The Cat 3,000-6,500 lb. LP gas cushion tire series offers
Motor Vehicle Apprenticeship Programmes
Motor Vehicle Apprenticeship Programmes The Motor Vehicle Industry With over 20 million private cars on the road in addition to commercial vehicles, it is not surprising that over half a million people
AURTGA001 Drive and manoeuvre trailers
AURTGA001 Drive and manoeuvre trailers Release: 1 AURTGA001 Drive and manoeuvre trailers Modification History Release Release 1 Comment New unit of competency. Application This unit describes the performance
ACCREDITATION PROFESSIONAL TECHNICAL PROGRAM OUTCOMES
ACCREDITATION PROFESSIONAL TECHNICAL PROGRAM OUTCOMES Automotive Technology All Student outcomes meet or exceed NATEF (ASE) requirements General Service Technician Certificate 1. Identify and properly
Phantom Screen s Motorized Retractable Screens Are the Only Choice
WHITE PAPER Phantom Screen s Motorized Retractable Screens Are the Only Choice To ensure safety and performance, only UL or CSA compliant motorized retractable screens should be used in construction projects
SAN JACINTO COLLEGE COMMERCIAL TRUCK DRIVING CLASS SCHEDULE
SAN JACINTO COLLEGE COMMERCIAL TRUCK DRIVING CLASS SCHEDULE CVOP Day Class 2013 Monday through Thursday 7AM to 6PM -6 weeks PTD/DDC Day Defensive Driving Course Schedule January 7 - February 14 February
Health and Safety Resources Caution to Users
Resources Caution to Users Many of the resources in this archive were originally prepared by WSN s predecessor organizations for use by industry clients. While much of the information and many of the forms
S.C. IRUM S.A - ROMANIA
S.C. IRUM S.A - ROMANIA www.irum.ro GLOBAL NETWORK MAVIPROD GROUP MAVIPROD ROMANIA IRUM MAVIPROD HUNGARY MAVIPROD MOLDAVIA WHAT WE DO AND HOW? We make tractors. Based on more than half a century of experience,
Diesel Technology Medium and Heavy Truck Technician Diploma
Diesel Technology Medium Heavy Truck Technician Diploma Open Admissions Diploma Maysville Community Technical College Rowan Campus Program Coordinator: Dennis Swartz 606/78-158 ext 6641, Office A-04 E-Mail:
PAST EXAM PAPER & MEMO N3 ABOUT THE QUESTION PAPERS:
EKURHULENI TECH COLLEGE. No. 3 Mogale Square, Krugersdorp. Website: www. ekurhulenitech.co.za Email: info@ekurhulenitech.co.za TEL: 011 040 7343 CELL: 073 770 3028/060 715 4529 PAST EXAM PAPER & MEMO N3
Apprenticeship Curriculum Standard. Level 3
Apprenticeship Curriculum Standard Marine Engine Technician Level 3 435B 2014 Please Note: Apprenticeship Training and Curriculum Standards were developed by the Ministry of Training, Colleges and Universities
36,000 lb. Forklift Chassis Flipper Sect. 4 - Equipment Specification Page 1 of 6
4.0 SCOPE OF WORK: A. Work includes, but is not limited to, providing all labor, materials, equipment, and services required for the design, manufacture, fabrication, assembly, sandblasting, painting,
User's Manual. Earth Ground Resistance Tester. Model Introduction
User's Manual Earth Ground Resistance Tester Model 382152 Introduction Congratulations on your purchase of the Extech Earth Ground Resistance Tester. This device can measure resistance (in 3 ranges) and
Administrative Component. 1. On what date did the new rules come into force? November 20, 2016.
FREQUENTLY ASKED QUESTIONS REGARDING THE REGULATION RESPECTING SAFETY STANDARDS FOR ROAD VEHICLES Administrative Component 1. On what date did the new rules come into force? November 20, 2016. 2. Why was
THE CORPORATON OF THE TOWN OF MIDLAND VEHICLE TOWING AND POUND SERVICES 2018/2019 TENDER L
THE CORPORATON OF THE TOWN OF MIDLAND VEHICLE TOWING AND POUND SERVICES 2018/2019 TENDER L04-54474 MAY, 2018 TOWN OF MIDLAND TENDER VEHICLE TOWING AND POUND SERVICES SEALED TENDERS will be received until
BC Pilot Car Load Movement Guidelines. Task Force on Vehicle Weights and Dimensions Policy. December 14, 2016
BC Pilot Car Load Movement Guidelines Task Force on Vehicle Weights and Dimensions Policy December 14, 2016 Why we have been doing this review Work has been underway since late 2012. Known challenges were
Requirements for 2018 Truck Certification
Description Requirements for 2018 Truck Certification As products continue to change, we must constantly look at our learning strategies and ensure that our certification programs are addressing the needs
SCOPE OF THE CONTEST AUTOMOTIVE SERVICE TECHNOLOGY NYS
AUTOMOTIVE SERVICE TECHNOLOGY NYS PURPOSE To evaluate each contestant s preparation for employment and to recognize outstanding students for excellence and professionalism in the field of automotive service