Work Experience Form Heavy Duty Equipment Technician

Transcription

1 National Occupational Analysis (NOA) Personal Information (please print) Work Experience Form Heavy Duty Equipment Technician Legal First Name Middle Initial Legal Last Name Birth Date (yy/mm/dd) Address City/Town Postal Code Home or Cell Phone Business Phone address Fax # Eligibility Requirements In order for Trades Qualifi ers (TQ) to be approved to challenge the certifi cation exam or for Designated Trainers (DT) to be approved to register apprentices, you must have worked both a minimum of 6 years and accumulated 10,800 hours, as well as acquired at least 70% scope of the trade. Check the box you are applying for Trades Qualifi er (Experienced tradesperson being assessed to challenge the certifi cation exam) Designated Trainer (Experienced tradesperson being assessed to register apprentices) * We encourage all Designated Trainers interested in receiving a Certifi cate of Qualifi cation (trade ticket) to apply to challenge the exam through the Trades Qualifi cation process. The application can be found at: Instructions You are about to complete the Work Experience Form (WEF) which is based on the sub-tasks outlined in the National Occupational Analysis (NOA). The NOA provides detailed information that will assist you when completing the WEF and is your best source for identifying any training gaps. If you have diffi culty understanding the detailed break-down of the subtasks, go to the Red Seal website at: Under the Resource Centre drop-down menu, select National Occupational Analyses, then click on Consult a Trade s NOA. Select your trade from the list, then click on the PDF. If more than one NOA is listed for your trade, choose the NOA that the exam is based on and download that version. Rate your experience for each sub-task based on the scale below. The number of questions in each section of the certifi cation exam is identifi ed next to each Block title. How you assess yourself is an important step to prepare for the certifi cation exam. Circle #0 if I have no experience doing this. Circle #1 if I have a little experience doing this. Circle #2 if I have some experience doing this with help. Circle #3 if I have some experience doing this alone and unaided. Circle #4 if I have frequently done this. Circle #5 if I have extensive experience doing this. Sign and date the completed Work Experience Form and return it to Apprenticeship Manitoba with either the Trades Qualification or Designated Trainer application form and related documents. Keep one copy of the Work Experience Form for your records. Rev. 04/17 Brandon Thompson Winnipeg 340-9th St Station Rd Lombard Ave. R7A 6C2 R8N 0N3 R3B 0T Fax Fax Fax

2 Block A Common Occupational Skills (11 Questions) 1. Uses and maintains tools and equipment Maintains tools and equipment Uses hoisting and lifting equipment Operates access equipment Uses personal protective equipment (PPE) and safety equipment. 2. Performs general maintenance and inspections Maintains fl uids Services fasteners, sealing devices, adhesives and gaskets Services hoses, tubing, piping and fi ttings Services bearings and seals Services safety features Performs scheduled maintenance procedures Identifi es operational faults Performs operational check-out. 3. Organizes work Uses documentation and reference materials Completes documentation Communicates with others Prepares job action plan Maintains safe work environment. 2

3 4. Performs routine trade activities Heats materials Cools materials Cuts materials Welds materials Cleans parts and materials. Block B Engines and Engine Support Systems (21 Questions) 5. Diagnoses engines and engine support systems Diagnoses base engine Diagnoses lubrication systems Diagnoses cooling systems Diagnoses intake and exhaust systems Diagnoses fuel systems Diagnoses engine control systems Diagnoses emission control systems. 6. Repairs engines and engine support systems Repairs base engines Repairs lubrication systems Repairs cooling systems Repairs intake and exhaust systems Repairs fuel systems Repairs engine control systems Repairs emission control systems. 3

4 Block C Hydraulic, Hydrostatic and Pneumatic Systems (26 Questions) 7. Diagnoses hydraulic, hydrostatic and pneumatic systems Diagnoses hydraulic systems Diagnoses hydrostatic systems Diagnoses pneumatic systems. 8. Repairs hydraulic, hydrostatic and pneumatic systems Repairs hydraulic systems Repairs hydrostatic systems Repairs pneumatic systems. Block D Drivetrain Systems (18 Questions) 9. Diagnoses drivetrain systems Diagnoses clutch systems Diagnoses torque converters, fl uid couplers and retarders Diagnoses driveline systems Diagnoses transmission and transfer case systems Diagnoses axle and differential systems Diagnoses fi nal drive systems. 10. Repairs drivetrain systems Repairs clutch systems Repairs torque converters, fl uid couplers and retarders Repairs driveline systems. 4

5 10.04 Repairs transmission and transfer case systems Repairs axle and differential systems Repairs fi nal drive systems. Block E Steering, Suspension, Brake Systems, Wheel Assemblies and Undercarriage (20 Questions) 11. Diagnoses steering, suspension, brake systems, wheel assemblies and undercarriage Diagnoses steering systems Diagnoses suspension systems Diagnoses brake systems Repairs wheel assemblies Diagnoses undercarriage systems. 12. Repairs steering, suspension, brake systems, wheel assemblies and undercarriage Repairs steering systems Repairs suspension systems Repairs brake systems Repairs wheel assemblies Repairs undercarriage systems. Block F Electrical and Vehicle Management Systems (24 Questions) 13. Diagnoses electrical systems Diagnoses starting/charging systems and batteries Diagnoses electrical components, motors and accessories. 5

6 14. Repairs electrical systems Repairs starting/charging systems and batteries Repairs electrical components, motors and accessories. 15. Diagnoses electronic vehicle management systems Reads diagnostic trouble codes (DTCs) Monitors parameters Interprets test results Tests system circuitry and components. 16. Repairs electronic vehicle management systems Updates component software Repairs components. Block G Environmental Control Systems (8 Questions) 17. Diagnoses environmental control systems Diagnoses heating systems Diagnoses ventilation and fi ltration systems Diagnoses air conditioning systems Diagnoses sound suppression systems. 18. Repairs environmental control systems Repairs heating systems. 6

7 18.02 Repairs ventilation and fi ltration systems Repairs air conditioning systems Repairs sound suppression systems. Block H Structural Components, Accessories and Attachments (7 Questions) 19. Diagnoses structural components, accessories and attachments Diagnoses structural components Diagnoses operator station components Diagnoses attachments and accessories. 20. Repairs structural components, accessories and attachments Performs mechanical repairs on structural components Repairs operator station components Repairs attachments and accessories Installs attachments and accessories. Name (please print) Signature Date: Apprenticeship Manitoba Lombard Ave. Winnipeg, MB, R3B 0T4 (204) (Phone) (Toll Free in Manitoba) (204) (Fax) 7