guide l l l On the following pages, AutoGlass magazine offers a comprehensive database of 49 adhesive Urethane adhesives

Transcription

1 Urethane s guide l l l On the following pages, AutoGlass magazine offers a comprehensive database of 49 products for auto glass technicians. The features s from North American companies: Adco Products Inc. of Michigan Center, Mich.; C.R. Laurence of Los Angeles; Dow Automotive of Dayton, Ohio; Eftec Aftermarket of Troy, Mich.; OETech, distributed by Pilkington North America of Toledo, Ohio; Shat R Proof Corp. of Savage, Minn.; Sika Corp. of Madison Heights, Mich.; Sommer & Maca Industries of Cicero, Ill.; Sterling Products of Amityville, N.Y.; and M of St. Paul, Minn. Missing from this year s guide is PPG Auto Glass of Pittsburgh, which has discontinued its line of auto glass s. The offers detailed information on each product in categories such as minimum installation temperature; minimum ; lap shear at ; ultimate ; and lap shear. Company representatives also provided recommended uses and additional helpful information. Visit to order copies of the. Write to Jenni Chase at jchase@glass.org to add your products to the database. 28 AutoGlass July/August 2007

2 - or dry time ultimate Titan Pro1 primerless, all-weather, one-hour isocyanate-free less-to-glass. Pinchweld scratches and rust should be sealed with Titan UP-0. Encapsulated parts should be primed with Titan UP-0. 1 hour per safe Not applicable 50 percent relative 550 pounds per square inch Full windshield and backlite installations. less, nonconductive, allweather, one-hour. Isocyanate-free for enhanced installation safety. Exceeds Federal Motor Vehicle Safety Standard 212 and meets OEM standards. Titan Pro2 primerless, all-weather, two-hour isocyanate-free less-to-glass. Pinchweld scratches and rust should be sealed with Titan UP-0. Encapsulated parts should be primed with Titan UP-0. 2 hours per safe Full windshield and backlite installations. less, nonconductive, allweather, two-hour. Isocyanate-free for enhanced installation safety. Exceeds FMVSS 212 and meets OEM standards. Adco Products Inc. Titan 0 primerless, high modulus, isocyanate-free less-to-glass. Pinchweld scratches and rust should be sealed with Titan UP-0. Encapsulated parts should be primed with Titan UP-0. hours per safe Less than hours Full windshield and backlite installations. Improved Titan 0 formula now with three-hour safe time. Heavy body formulation is sag-resistant and maintains bead profile. Exceeds FMVSS 212 and meets OEM standards. Titan 80 primerless, high modulus, isocyanate-free less-to-glass. Pinchweld scratches and rust should be sealed with Titan UP-0. Encapsulated parts should be primed with Titan UP-0. 4 hours per safe Less than hours Full windshield and backlite installations. Easy to apply, primerless and guns without sagging. Exceeds FMVSS 212 and meets OEM standards. CRL900HV high viscosity, fastcuring, cold-applied in.1 fluidounce cartridge and CRL915HV in 15.2 fl oz sausages; part of the Lynx Services program at 8 hours 40 1-inch bead per 24 hours 50 psi High strength and best value. Passes FMVSS 208 and 212 with dual air bags and unrestrained dummies. CRL950FC high viscosity, fastcuring with high initial strength, cold-applied; part of the Lynx at 4 hours 40 1-inch bead per 24 hours Acceptable for nonconductive applications. Passes FMVSS 208 and 212 with and unrestrained dummies. C.R. Laurence Co. CRL700 high viscosity, hotapplied; part of the Lynx at inch bead per 24 hours 700 psi Heat-accelerated, easiest gunning CRL. Acceptable for nonconductive applications. Passes FMVSS 208 and 212 with and unrestrained dummies. PP01HV high viscosity, primerless-to-glass; part of the Lynx PPMP pinchweld primer, PPUV EPDM/PVC primer ultraviolet blocker, 1-inch bead per 24 Crash tested; passes FMVSS 212, 21 and 208. less-to-glass with superior decking support. Fast green strength build-up. Isocyanate-free. Formula self-produces moisture during curing for faster rates. Premium value. PP02MV medium viscosity, primerless-to-glass; part of the Lynx PPMP pinchweld primer, PPUV EPDM/PVC primer ultraviolet blocker, 4 1-inch bead per 24 less-to-glass with great superior decking support. Fast green strength build-up. Isocyanate-free. Formula self-produces moisture during curing for faster rates. Premium value. PP0HL high modulus, low conductive, primerless-to-glass; part of the Lynx Services program PPMP pinchweld primer, PPUV EPDM/PVC primer ultraviolet blocker, 1-inch bead per 24 OEM tested. less-to-glass. Fast green strength build-up. Isocyanatefree. Formula self-produces moisture during curing for faster rates. Dow Automotive aftermarket.com BetaSeal* Express and Express EP advanced- one-step glass and frit primer and 1 hour 0 AutoGlass July/August

3 - or dry time BetaSeal, BP and EP all-application auto glass 1 hour Suitable for all applications, including high modulus and nonconductive, structurally bonded or direct-glazed glass such as windshields, backlites, quarter glass and other stationary glass; also channel bonding, attaching hardware to glass and backfilling to install reveal moldings or BetaSeal X-2500 two-component Two 1 hour Dow Automotive aftermarket.com BetaSeal U-400HV and U-400BP rapid- 2 hours OEM approved and used. BetaSeal U-418 quick-, primerless-to-glass Glass: None required. hours less-to-glass. BetaSeal U-418HV quick-, primerless-to-glass Glass: None required. hours less-to-glass. High viscosity. BetaSeal* Express Clear EZKit and Express BP Clear EZKit advanced. Kits contain enough, primer and ancillary items for multiple installations. Glass: BetaPrime* Clear SA one-step glass and frit primer and 1 hour BetaSeal 0ne Clear EZKits and 0neBP Clear EZKits all-application auto glass. Kits contain enough, primer and ancillary items for eight installations. Glass: BetaPrime* Clear SA one-step glass and frit primer and 1 hour Suitable for all applications, including high modulus and nonconductive, structurally bonded or direct-glazed glass such as windshields, backlites, quarter glass and other stationary glass; also channel bonding, attaching hardware to glass and backfilling to install reveal moldings or Dinitrol D-4 less-to-glass, paint, metal Best if used at moderate temperature More than 24 hours 20 psi less for rubber gaskets, sealing leaks, bonding trims and moldings and backfill. Eftec Aftermarket Dinitrol D-500MV, milliliters or 00 ml 58 Plus or 520 and 50 hours More than 24 hours 9 psi Medium viscosity, OEM-approved and used, crash tested. Dinitrol D-500, ml or 00 ml 58 Plus or 520 and 50 hours More than 24 hours 9 psi Standard viscosity, OEM-approved and used, crash tested. Dinitrol D-501HV, ml or 00 ml 58 Plus or 520 and hours More than 24 hours 1,0 psi High viscosity, OEM-approved and used, crash tested. Dinitrol D-501HVHM, ml or 00 ml 58 Plus or 520 and 50 1 hour More than 24 hours 1,00 psi High modulus, high viscosity, OEM-approved and used, crash tested. Dinitrol D Plus or 520 and 50 1 hour More than 24 hours 1,070 psi Heated, high modulus, high viscosity, excellent decking, OEM-approved and used, crash tested. Dinitrol D-9000, ml or 00 ml 58 Plus or 520 and 50 1 hour at to 1 More than 24 hours 9 psi Cold-applied, high modulus, nonconductive, high viscosity, superior decking properties, OEM-approved and used, crash tested. 2 AutoGlass July/August

4 - or dry time OE Tech 1 Approximately 1 hour 7 days High modulus, low-conductive properties; fast-curing suitable for many applications. OE Tech 2 Approximately hours 7 days Suitable for applications that require a low-conductive. OETech OE Tech Approximately hours 7 days Suitable for applications that require a low-conductive. OE Tech 4 Approximately 2 hours 7 days 50 psi High modulus, low-conductive properties; fast-curing suitable for many applications. OE Tech Heritage Approximately hours 7 days Suitable for applications that require a low-conductive. SRP10HT SRP5025 for paint, Pre-Applied Adhesive System, molding and other pinchweldrelated priming. 5-to- for needed for 1 hour 144 psi This preheated is designed to give installers an accelerated safe time and superior decking. Achieves dual air-bag times in as little as one hour. Shat R Proof Corp. SRP180HV SRP180FP SRP0HV 5-to- for needed for 5-to- for needed for 2 1 hour 144 psi 1 hour 144 psi The SRP180HV is a dependable, everyday with quick times and superior decking. Available in ml cartridges and 00 ml foil packs. Achieves dual air-bag times in as little as one hour. SRP0 is required when installing auto glass on many of today s sports and luxury vehicles. The high modulus formula adds torsional stiffness to the vehicle s windshield, while the nonconductive aspect protects the electronics embedded in the glass or encapsulation of the windshield. Also required on vehicles with aluminum body frames. SRP Velocity 5-to- for needed for 1 hour 144 psi The SRP Velocity offers one-hour times year-round and in all weather conditions. SikaTack ASAP hot-applied windshield Sika Aktivator, Sika primer 20 G+P at 45 Not supported 1-inch bead in 24 hours at 7 F and Acceptable for nonconductive applications. Use Sika primer 20 G+P on pinchweld scratches. SikaTack Ultrafast II hot-applied windshield Sika Aktivator, Sika primer 20 G+P at 2 hours Not supported 1-inch bead in 24 hours at 7 F and Acceptable for nonconductive applications. Use Sika primer 20 G+P on pinchweld scratches. Sika Corp. SikaTack COOL fast-curing, coldapplied, all-in-one windshield Sika Aktivator, Sika primer 20 G+P at 2 F 2 hours Not supported 1-inch bead in 24 hours at 7 F and 50 psi Acceptable for all applications, including nonconductive and high modulus. Use Sika primer 20 G+P on pinchweld scratches. SikaTack MOVE IT fast-curing, cold-applied, all-in-one windshield Sika Aktivator, Sika primer 20 G+P at 1 hour Not supported 1-inch bead in 24 hours at 7 F and Acceptable for all applications, including nonconductive and high modulus. Use Sika primer 20 G+P on pinchweld scratches. Sikaflex 220+ fast-curing, coldapplied windshield Sika Aktivator, Sika primer 20 G+P at 8 hours Not supported 1-inch bead in 24 hours at 7 F and 00 psi Contact a Sika representative for additional technical information. Use Sika primer 20 G+P on pinchweld scratches. 4 AutoGlass July/August

5 - or dry time PowrBond -Hour, low-conductive, No Universal -Step primer No Step: - 1 hour above 450 psi at 7 and psi Newest product provides one-hour time above. Meets FMVSS 212 and 208. Lynx approved. Product liability insurance. User Guide contains s, installation instructions and cross-brand technical data. Sommer & Maca Industries PowrBond regular viscosity cartridge, low-conductive, No PowrBond high viscosity cartridge, low-conductive, No Universal -Step primer No Universal -Step primer No Step: - -Step: - 41 F 41 F hours, hours, 24 hours at 7 and 50 percent at 7 and psi 800 psi Regular viscosity passed FMVSS 212 and meets FMVSS 208. Lynx approved. Product liability insurance. User Guide contains s, installation instructions and cross-brand technical comparative data. Drive-away s available at High viscosity meets FMVSS 212 at 5 miles per hour; also meets FMVSS 208. Lynx approved. Product liability insurance. User Guide contains driveaway s, installation instructions and cross-brand technical comparative data. PowrBond heated, high modulus, low-conductive, No Universal -Step primer No Step: - F 2 hours, at 7 and psi Meets FMVSS 212 and 208. Lynx approved. Product liability insurance. User Guide contains s, installation instructions and cross-brand technical comparative data. Sterling 19HV, high viscosity, fast-curing ; part of Lynx Sterling Step; acts as cleaner, primer 2 hours; consult 7 F and 50 percent Exceeds FMVSS 212, 208 and 21. Suitable for windshields, backlites and other stationary applications, including those requiring nonconductive. Sterling Products products.us Sterling 19 Plus, medium viscosity ; part of Lynx Sterling Step; acts as cleaner, primer hours; consult 7 F and 50 percent Exceeds FMVSS 212, 208 and 21. Suitable for windshields, backlites and other stationary applications. Sterling Hour, fast-curing, high viscosity, nonconductive ; part of Lynx Sterling Step; acts as cleaner, primer F 1 hour; consult 7 F and 50 percent Exceeds FMVSS 212, 208 and 21. Suitable for windshields, backlites and other stationary applications, including those requiring nonconductive. M Auto Glass Urethane HMNC PN087, ml cartridge M Single Step primer PN0881, 125 ml bottle PN0882, 0 ml bottle at 7 and 72 hours at 7 and High modulus, nonconductive product specifically designed for use on later model European vehicles and vehicles with glass-embedded telematics. M M Fast Cure Auto Glass Urethane PN0890, ml cartridge PN0889, 450 ml FlexPack PN085, 00 ml FlexPack M Single Step primer PN0881, 125 ml bottle PN0882, 0 ml bottle at 7 and 48 hours at 7 and Fastest curing cold-applied M auto glass. GM approved. Exceeds OEM strength requirements. M Auto Glass Urethane MV PN089, ml cartridge PN0895, 450 ml FlexPack PN0854, 00 ml FlexPack M Single Step primer PN0881, 125 ml bottle PN0882, 0 ml bottle at 7 and 72 hours at 7 and Medium viscosity auto glass. Appropriate for most vehicle makes and models. AutoGlass July/August