FIBOX EX. ATEX Directive (94/8/EC) FIBOX ALX ENCLOSURES FIBOX FEX-PC-7 FIBOX PEX

Transcription

1 71 FIBO AL ENLOSURES FIBO E ATE Directive (94/8/E) FIBO FE-P-7 FIBO PE Fibox E enclosures are made for use in hazardous areas. They are designed, tested and manufactured to international standards. The certificates are issued by the manufacturer under licence from a test authority. All certified products are labelled clearly in compliance with the certification. An enclosure with omponent ertification will achieve the specified degree of safety in use when selected, assembled and installed correctly. The omponent ertification establishes the acceptability of the empty enclosure for use as a component part of equipment which is certified by a ertificate of onformity. Only equipment with a ertificate of onformity should be installed in hazardous areas.

2 72 FIBO AL FIBO AL ALUMINIUM ENLOSURE At least IP 54, IK 08 FIBO AL aluminium enclosures for housing terminal blocks, electronic devices and other industrial components. These enclosures are made from high quality, non corrosive aluminium. ATE VTT 03 ATE Q 002 VTT 03 ATE 044U (II 2 G, EEx e II) VTT 03 ATE 137U (II 3 D) Supplement 1 to VTT 03 ATE 044U and VTT 03 ATE 137U Including: Enclosure base, cover, cover screws, mounting screws, earth screws and earth terminal. ORDER SMBOL AL AL AL AL AL AL 0306 AL 0806 AL AL 128 AL AL AL 169 AL AESSORIES Order symbol Mounting plate AM 0808 AM 03 AM 08 AM 0825 AM 1212 AM 1222 AM 1236 AM 1616 AM 1626 AM 1636 AM 1656 AM 2320 AM 2328 AM 2333 AM 2340 AM 2360 AM 3140 AM 3 Mounting rail DIN 15 ARM x 88 ARM x 140 ARM x 65 ARM x 115 ARM x 165 ARM x 240 Mounting rail DIN ARH 12 ARH 22 ARH 36 ARH 16 ARH 26 ARH 1636 ARH 1656 ARH 2320 ARH 2328 ARH 2333 ARH 40 ARH 60 Wall mounting lugs MRS MRS Size 69 x x x x x x x 3 1 x 1 1 x x 3 1 x x x x x x x x 585 x x 203 x 343 x 140 x 240 x 340 x 540 x 180 x 260 x 310 x 383 x 580 TEHNIAL INFORMATION More accessories and dimensions; see page 28. PROPERT AlSi AST ALUMINIUM ONFORMIT TO STANDARDS Ingress Protection At least IP 54 (EN 60529) IP66/IP67 Impact Resistance 7J AL to AL Temperature Range elsius (short term) Fahrenheit F Temperature Range elsius (continuous) Fahrenheit F Silicone AL 128 to AL Temperature Range elsius (short term) Fahrenheit F Temperature Range elsius (continuous) Fahrenheit F PUR USA Enclosures for Electrical Equipment NEMA 1, 4, 4, 6 12 and 13 (50/508) Europe Electrical apparatus for potentially explosive atmospheres EN 50014: A1...A5, Genreral requirements EN 50019: A1...A5, Increased safety "e" Polyester Powder Paint olour over Screws hemical Resistance * RAL 7001 grey Stainless Steel Data subject to change without notice. *onsult separate raw material data for more detailed information. mounting Also bigger Ex sizes available.

3 73 FIBO FE-P-7 POLARBONATE ENLOSURE At least IP 54 The FE-P-7 range is suitable for enclosing terminals and other equipment in harsh environmental conditions such as petrochemical sites or off-shore platforms. Including: Enclosure base, cover, cover screws, and mounting screws. ORDER SMBOL FE G FE G FE G FE G FE G FE G EAN-code ORDER SMBOL Transparent cover FE T FE T FE T FE T FE T FE T FIBO FE-P-7 FE G FE T FE G FE T FE G FE T ERTIFIATES: - VTT 03 ATE Q VTT 03 ATE 043U (II 2 G, EEx e II) - VTT 03 ATE 136U (II 3 D) - FIMKO: IP67 to IE529 - Germanischer Lloyd 560 FE G FE G FE T FE T 560 FE G FE T TEHNIAL INFORMATION Accessories, see pages PROPERT POLARBONATE (P) ONFORMIT TO STANDARDS Ingress Protectionat At least IP 54 (EN 60529) IP66/IP67 Europe Electrical apparatus for potentially explosive atmospheres EN 50014: A1...A5, General requirements EN 50019: A1...A5, Increased safety "e" Impact Resistance 4J Temperature Range elsius (short term) Fahrenheit F Temperature Range elsius (continuous) Fahrenheit F Electrical Insulation Totally insulated Light Grey Parts olour RAL 70 Industry Grey Transparent lear P over lear Transparent over Screws RAL 70 over Screws Polyamide (PA) Silicone Enclosure Flaability Rating UL94-5V UL 6 5 in. vertical flame test Glow Wire Test 960 IE , Self-extinguishing Non-toxicity Halogen Free UV resistance UL 508, 720 hours in "Weatherometer" hemical Resistance * Data subject to change without notice. *onsult separate raw material data for more detailed information mounting

4 FIBO FE PE FIBO PE POLESTER ENLOSURE At least IP 54 The FIBO PE product family is suitable for enclosing terminals and other electrical equipment in the most demanding environments such as mining or chemical industries Including: Enclosure base, cover, cover screws, and mounting screws. ORDER SMBOL PE PE 0106 PE 0606 PE 086 PE 129 PE PE 169 PE PE PE PE PE AESSORIES Order symbol Mounting plate PM 0808 PM 01 PM 06 PM 09 PM 1616 PM 1626 PM 2526 PM 2540 PM 4040 Mounting rail DIN 15 PRM 01 PRM 06 PRM 09 Mounting rail DIN PRH 2526 Size 64 x x x x x 1 1 x x x x x x x 179 x 238 Hinge kit 1 pair includes screws AH A/B PH A ERTIFIATES: - PTB: EEx e II Mounting foot kit MRS MRS x42 15x50 More accessories and dimensions; see page 28. TEHNIAL INFORMATION PROPERT POLESTER ONFORMIT TO STANDARDS Ingress Protection IP 65 USA Enclosures for Electrical Equipment (EN 60529) At least IP 54 NEMA 1, 4, 4, 6 12 and 13 Impact Resistance 7J UL 6 5 in. vertical flame test IE , Self-extinguishing Temperature Range elsius (short term) Fahrenheit F Temperature Range elsius (continuous) Fahrenheit F Electrical Insulation Totally insulation Enclosure Flaability Rating UL94-5V UL 6 5 in. vertical flame test Glow Wire Test 960 IE , Self-extinguishing over screws Stainless Steel EPDM hemical Resistance * Data subject to change without notice. *onsult separate raw material data for more detailed information mounting

5 E ERTIFIATION OF ENLOSURES Fibox E enclosures are made for use in hazardous areas. They are designed, tested and manufactured to international standards. The certificates are issued by the manufacturer under licence from a test authority. All certified products are labelled clearly in compliance with the certification. An enclosure with omponent ertification will achieve the specified degree of safety in use when selected, assembled and installed correctly. The omponent ertification establishes the acceptability of the empty enclosure for use as a component part of equipment which is certified by a ertificate of onformity. Only equipment with a ertificate of onformity should be installed in hazardous areas. Hazardous areas are referred to as they are classified under ENELE European Norms: EPLANATION OF ERTIFIATE SMBOLS The following tables can be used as practical quick guides. For more detailed information please contact your local Fibox representative. The different E protection types specified are: Protection typ Symbol Test Standard Increased safety e EN Non-sparking n - Flameproof d EN Intrinsically safe i EN Special protection s - Encapsulation m EN Oil iersion o EN Pressurisation p EN Sand or powder filled q EN lassification of gas groups to IE standards: Gas Group I II A II B II Representative Gas Methane Prophane Ethylene Acetylene and Hydrogen FIBO E one 0 = one in which an explosive gas/air mixture is continuously present or present for long periods. one 1 = one in which an explosive gas/air mixture is likely to occur in normal operation. one 2 = one in which an explosive gas/air mixture is not likely to occur in normal operation and if arises, will only last for a short period. Temperature classification to EN standards of the maximum surface temperature allowed for any part of an apparatus: Temperature lass Max. Surface Temperature T1 0 T2 300 T3 200 T4 1 T5 100 T6 85 These temperature classifications are applicable only to mounted enclosures which have a ertificate of onformity. IRUIT BOARD BRAKET Printed circuit boards and mounting plates often need special mounting supports that offer flexibility in positioning the boards across the enclosure body. Mounting supports also raise the board above the enclosure bottom, especially effective when using two sided boards. This circuit board bracket has a standard E1 (IE 297-3, DIN 41494) Eurocard screw mounting distance of 89 (3.5") accepting M2,5 to M4 screws. The bracket can also be used for nonstandard boards by separating the ends of the bracket (a) from the connector bridge (b). If the bracket is not needed, the adapter parts for each individual mounting pod size can be used only for raising the board above the enclosure base level. b) a) MB 86 Ø 0.4 Ø 0.3 Ø 0.3 IRUIT BOARD BRAKET ORDER SMBOL Standard Mounting Distance inches Remarks MB Adapter for EURONORD, PIOLO, MINI. Direct mount to EK, SOLID, EKI, AL, P-7, PE. a) b) a) USTOMISATION Enclosures can be machined, painted, screen printed and preassembled to meet your customisation requirements. Fibox's service center offers complete N machining, hinge mounting, screen printing, assembly and much more. Our wide selection of enclosures and accessories can be customised to create a unique enclosure meeting your application requirements.