Approved Lubricants ILU 1.00GBD0110. For further information call +44 (0) , or visit

Size: px
Start display at page:

Download "Approved Lubricants ILU 1.00GBD0110. For further information call +44 (0) , or visit"

Transcription

1 The Series G Industrial Gearbox from David Brown is renowned worldwide for providing real value for money. Businesses know that you can rely on the Series G perform consistently day in and day out. Designed and extensively tested handle the most demanding of quarrying applications, it can be built and despatched in just 48 hours thus avoiding costly downtime and being tally cost-effective for your business. Everyone working in the quarrying industry knows how much revenue can be lost by equipment failure and subsequent downtime. That s why it s crucial that you select equipment you can rely on 00%. The Series G will ensure that you get maximum productivity, plus it s backed up by all of David Brown s experience and expertise. Find out about Series G now and add real value your business. For further information call +44 (0) , spsales@davidbrown.com or visit Approved Lubricants ILU.00GBD00 I

2 SPECIFICATION NOTES ) All David Brown gear units are provided with a nameplate which should give the recommended lubricant grade number If it is not given guidance for lubricant selection is included in the appropriate Gear Catalogue and/or Installation and maintenance Manual 2) The oil change period depends upon the type of oil, the type of gear unit, operating conditions and environment ence should be made the appropriate Gear Catalogue and/or Installation and Maintenance Manual or the appropriate David Brown standard 3) Where the gear oil is be used for lubricating other machinery, its suitability for such purposes must be discussed with the oil supplier; any conflict of requirements should preferably be resolved at the design stage 4) Each lubricant range may be accompanied by one or more of the following characters These indicate limitations or restrictions on their use: a) These lubricants may have their working life reduced if used at elevated temperatures Consult oil supplier when the normal operating temperature exceeds 80 o C b) These lubricants should not be used in units fitted with trailing sprag or backsp devices without prior agreement with the manufacturer; the additives, or the base fluids may modify the coefficient of friction which these devices depend on c) At least one of the lubricant range has passed the FZG micro-pitting test, test results are available d) These oils contains solid lubricants (eg MOS 2 or graphite) and must NOT be used in units fitted with any type of backsp device which relies on friction for its operation e) These lubricants contain additives which may adversely affect silvered or white metal components; consult oil supplier f) These lubricants should not be used in units containing copper alloys eg worm gear units g) These lubricants are not suitable for use with aluminium or aluminium alloy components h) Minimum operating temperatures of these lubricants are based on worst case values, lower operating temperatures may be available, please check with local sckist 5) Different types or brand names of oils must not be mixed If it is desirable change the oil type used in the gear unit it must be thoroughly flushed; this is particularly important when type 'G' lubricants are involved 6) When rationalisation of lubricant scks is desirable gear units can use a different type of lubricant that specified but the viscosity grade number (n) must be the same unless a change has been agreed by our engineers In general: i) If lubricant nm is specified use nm, na or ne ii) If lubricant na is specified use na or ne iii) If lubricant ne is specified use ne iv) Synthetic lubricants, types G and H, can be used in most applications as an alternative mineral based products, however our engineers should be consulted before using them Note: Type E lubricants should not be used in units containing copper alloys at temperatures above 70 o C The lubricants in this leaflet are approved by David Brown for use in their industrial gearboxes Whilst every attempt is made ensure the quality and suitability of these lubricants, no responsibility can be accepted for the lubricant actually supplied or for any defects due unsatisfacry lubrication IF IN DOUBT - CONSULT OUR ENGINEERS

3 Table M Straight mineral oils (sometimes with mild additive treatments). These have a low load carrying capacity. 0M M 2M 3M 4M 5M 6M 7M 8M 9M OIL S' CORRESPONDING DESIGNATIONS Bayle Freedom Group Cronus a (-4) (-4) (-4) (-4) Tyro (-7) (-6) (-5) (-4) Boxer Services incorporated Volga a with Millers Oils Limited (-5) (-5) (-5) (-4) (-4) (-4) (-4) (-4) (-4) (+2) BP Oil International Limited Energol CS & DC a CS32 CS46 CS68 CS00 CS50 CS220 CS320 CS460 CS680 DCW000 (-7) (-5) (-5) (-4) (-4) (-4) (-4) (-4) (-4) (-) Caltex Rando (-0) (-0) (-4) Regal R & O (-7) (-7) (-4) (-4) Carl Bechem GmbH Staroil CBT (-7) (-20) (-) (-7) (-3) (-6) (-0) (-7) Castrol International Cresta a V SHS (-4) (-4) Hyspin VG (-25) (-6) (-6) (-6) (-6) Magna a (-3) (-3) (-6) (-6) (-3) (-3) (-4) Chevron Lubricants American Industrial Oil b (-0) (-0) (-7) (-7) (-7) (-7) (-7) Engen Petroleum Limited Turbine b (-6) (-6) (-6) (-6) Esso Canthus TK a 000 (+2) Teresso (-7) (-5) (-5) (-7) (-7) (-3) (-7) (-4) Exxon Teresstic (-30) (-5) (-5) (-5) (-2) (-2) (-5) (-4) Fuchs Lubricants Renolin GP (-7) (-7) (-7) (-3) (-2) Klüber Lubrication Crucolan (-0) (-0) (-0) (-5) (-5) (-5) (-5) (-5) Kuwait Petroleum International Q8 Verdi (-25) (-25) (-25) (-22) (-9) (-9) (-7) (-7) Lubrication Engineers Inc Almasol Pure Mineral OIl 40 (-3) Monolec Turbine Oil b (-24) (-24) (-24) (-8) (-8) (-8) (-3) Multilec Industrial Oil (-35) (-32) (-24) (-2) (-3) (-0) (-0) Mobil Oil Company Limited DTE light medium hvy med heavy (-9) (-) (-) (-) Saudi Arabian Lubricating Turbine Oil T32 T46 T68 T00 C50 C220 C320 C460 Oil Co. (-7) (-4) (-4) (-) (-) (-) (+2) (+2) Shell Oils Vitrea / Vitrea M a (-3) (-4) (-4) (-4) (-) (-) (-) (-) (-) Texaco Limited Regal EP (-22) (-22) (-9) (-3) (-4) (-) (-) (-) 2

4 Table A Mineral oils containing mild EP or Anti-Wear additives. These have a medium load carrying capacity. 0A A 2A 3A 4A 5A 6A 7A 8A 9A OIL S' CORRESPONDING DESIGNATIONS Bayle Freedom Group Apollo b,e (-24) (-4) (-3) (-3) (-3) (-2) (-2) (-2) (-) (-) Boxer Services incorporated Tiber b,e with Millers Oils Limited (-3) (-28) (-28) (-25) BP Oil International Limited Energol HLP - HM b, e (-25) (-25) (-25) (-9) Caltex Rando HD b (-28) (-28) (-25) (-6) (-0) (-7) Carl Bechem GmbH Staroil Nr b (-25) (-25) (-25) (-8) (-8) (-7) Castrol International Alpha ZN b, e (-6) (-6) (-6) (-4) (-4) (-4) Hyspin AWS b, e (-25) (-6) (-6) (-6) (-6) Chevron Lubricants Machine Oils AW b (-0) (-7) (-7) (-7) Engen Petroleum Limited Gencirc b, e (-) (-) (-) TQH 20 b, e (-2) (-9) (-9) (-6) (-6) Esso/Exxon Nu H h (-3) (-23) (-2) (-7) (-5) Fuchs Lubricants Renolin CLP b, e (-22) (-9) (-6) (-0) (-0) (-0) Kuwait Petroleum International Q8 Haydn b, e (-25) (-25) (-25) (-22) (-9) Q8 Holst (-3) (-3) (-7) Mobil Oil Company Limited DTE b, e extra hvy BB AA HH (-9) (-6) (-6) (-7) (-7) (+2) (+2) Omega Manufacturing Division Omega 62 b SAE0 SAE20 SAE30 SAE40 (-4) (-4) (-4) (-4) Omega 670 b SAE90 SAE40 (-4) (-4) Omega 680 b SAE90 (-7) Sasol Oil (Pty) Limited Rubis b, e (-9) (-6) (-3) (-7) Saudi Arabian Lubricating Hydraulic Oil AW Oil Co. (-25) (-9) (-6) (-0) Shell Oils Tellus b 32/ (-25) (-25) (-9) (-9) (-) (-) (-) Texaco Limited Rando HD b (-25) (-25) (-25) (-3) (-0) Total Azolla ZS b (-22) (-9) (-6) (-3) (-0) Cirkan ZS b (-4) (-4) Equivis ZS b (-34) (-3) (-3) Tribol GmbH Tribol 770 b (-27) (-27) (-24) (-4) (-4) (-2) 3

5 Table E Mineral oils containing industrial EP additives. These have a high load carrying capacity 0E E 2E 3E 4E 5E 6E 7E 8E 9E OIL S' CORRESPONDING DESIGNATIONS Bayle Freedom Group Remus b (-4) (-4) (-3) (-3) (-3) (-2) (-2) (-2) (-) (-) Boxer Services incorporated Indus b,e with Millers Oils Limited (-3) (-3) (-3) (-3) (-3) (-0) (-0) (-0) (-0) (-0) BP Oil International Limited Energol GR-XF b, c, e (-9) (-6) (-3) (-) (-) Energol GR-XP b, e (-9) (-9) (-9) (-5) (-0) (-7) (-4) Caltex Meropa b (-4) (-4) (-4) (-4) (-4) (-4) (-) (+5) RPM Borate EP Lubricant b (-22) (-22) (-7) (-4) (-7) Carl Bechem GmbH Berugear GS BM b (-20) (-20) (-3) (-0) (0) Staroil G b (-25) (-20) (-22) (-3) (-3) (-3) (-0) (-7) Castrol International Alpha Max b, c, e (-9) (-9) (-9) (-3) (-0) Alpha SP b, e (-6) (-6) (-6) (-6) (-6) (-6) (-) (-) (+2) Chevron Lubricants Gear Compound EP b (USA version) (-22) (-22) (-6) (-6) (-3) (-0) (-7) (-4) Gear Compound EP b (Eastern Hempisphere ver) (-9) (-6) (-6) (-3) (-3) (-3) (-3) (-0) Ultra Gear b (-22) (-25) (-0) (-7) (-7) (-2) Eko-Elda Abee Eko Gearlube b (-22) (-6) (-9) (-3) (-0) (-) Engen Petroleum Limited Gengear b (-2) (-2) (-2) (-5) (-2) (-3) (-3) Esso Spartan EP b, c (-22) (-6) (-9) (-6) (-3) (-7) (-4) Esso/Exxon Spartan EP b, h (-2) (-5) (-5) (-2) (-2) (-4) (-4) (-3) Fuchs Lubricants Powergear b P/Gear M460 H680 (-6) (-4) (-4) Renogear V b 68EP 00EP 50EP 220EP 320EP 460EP 680EP 000EP (-20) (-20) (-7) (-3) (-4) (-4) (-4) (-4) Renogear WE b (-7) (-4) (-4) Renolin CLPF Super b, d, e (-6) (-6) (-3) (-0) (-0) (-0) Klüber Lubrication Klüberoil GEM b (-5) (-5) (-5) (-5) (-5) (-5) (-5) (0) Kuwait Petroleum International Q8 Goya b (-25) (-25) (-25) (-22) (-6) (-3) (-0) (-4) (-) Lubrication Engineers Inc Almasol Vari-Purpose Gear b (-2) (-5) (-8) (-3) (-0) (-7) (-7) Monolec Industrial Lubricant b 300 (-24) continued on 5... Note: Type E lubricants should not be used in units containing copper alloys at temperatures above 70 o C. 4

6 Table E Mineral oils containing industrial EP additives. These have a high load carrying capacity...continued from 4 0E E 2E 3E 4E 5E 6E 7E 8E 9E OIL S' CORRESPONDING DESIGNATIONS Mobil Oil Company Limited Mobil gear 600 Series b (-9) (-9) (-9) (-3) (-3) (-) (-) Mobil gear XMP b, c (-22) (-22) (-22) (-9) (-3) (-7) (-4) Omega Manufacturing Division Omega 690 b, e 80w/90 85w/40 (-26) (-5) Optimol Ölwerke GmbH Optigear BM b (-9) (-9) (-3) (-) (-0) (-7) (-4) (-4) Optigear b, f (-32) (-24) (-24) (-20) (-9) (-8) (-9) (-7) (-0) Pertamina Masri b, e (Indonesia) (-7) (-4) (-4) (-4) (-4) (-4) (-4) (-4) (-4) Petro-Canada Ultima EP b, e (-28) (-22) (-6) (-0) (-4) Ultima EP b, e 68/50 68/220 (-34) (-3) Rocol Sapphire Hi-Torque b, e (-5) (-3) (-3) (-3) (-3) Sasol Oil (Pty) Limited Cobalt b, e (-3) (-7) (-7) (-4) (-) (-4) (+2) Hemat b, e (-9) (-9) (-0) (-7) (-4) (+2) Saudi Arabian Lubricating Gear Lube EP b, e EP68 EP00 EP50 EP220 EP320 EP460 Oil Co. (-3) (-3) (-2) (-) (0) (0) Shell Oils Omala b (-7) (-4) (-4) (-4) (-4) (-4) (-) (-) Omala F b, c (-22) (-22) (-6) (-3) (-0) (-4) (-4) Texaco Limited Meropa b (-25) (-22) (-9) (-6) (-6) (-0) (-0) (-0) Meropa WM b, c (-22) (-9) (-9) (-6) (-) Total Carter EP b (-0) (-7) (-7) (-7) (-7) (-4) Carter VP/CS b (-6) (-3) (-7) Tribol GmbH Molub-Alloy Gear Oil b, d 80W W 300S (-28) (-2) (-8) (-6) (-3) (-5) (-4) Tribol 00 b (-29) (-26) (-23) (-20) (-8) (-6) (-0) (-4) Note: Type E lubricants should not be used in units containing copper alloys at temperatures above 70 o C. 5

7 Table G 0207 Polyglycol based synthetic lubricants with Anti-Wear or EP additives. These have a medium high load carrying capacity. (see + ) 0G G 2G 3G 4G 5G 6G 7G 8G 9G OIL S' CORRESPONDING DESIGNATIONS Bayle Freedom Group Helicol W b * (-5) Boxer Services incorporated Boxergear W b with Millers Oils Limited (-5) (-3) (-3) (-28) BP Oil International Limited Enersyn SG-XP b, e (-3) (-34) (-28) Caltex Synlube CLP b (-40) (-37) (-34) (-3) (-28) (-3) Carl Bechem GmbH Berusynth EP b (-35) (-3) (-26) (-25) (-25) (-25) (-28) (-28) Castrol International Alphasyn PG b, c (-34) (-34) (-3) (-28) Esso/Exxon Glycolube b, h (-25) (-25) (-25) (-23) Fuchs Lubricants Renogear PGW + b 20 (-23) Renolin PG b (-34) (-3) (-34) (-34) (-34) (-34) (-28) (-28) Klüber Lubrication Klübersynth GH6 b, g (-40) (-30) (-30) (-30) (-25) (-25) (-20) (-20) (-20) Klübersynth UH 6 b, e (-30) (-25) (-25) Kuwait Petroleum International Q8 Gade b (-22) (-22) (-22) Laporte Performance Breox Industrial b Chemicals Limited Lubricant SW (-25) (-25) (-25) (-23) (-20) (-20) Breox SL range b (-46) (-42) (-40) (-37) (-35) Breox Oil Soluble x b 220 Industrial Lub (-23) Breox Worm Gear Lube b 65 (-25) Mobil Oil Company Limited Glygoyle b HE320 HE460 (-25) (-22) (-37) (-35) Optimol Ölwerke GmbH Optiflex A + b, e, g (-3) (-28) (-28) (-28) (-28) (-25) Shell Oils Tivela b SA SB SC SD (-25) (-25) (-25) (-23) Texaco Limited Synlube CLP b (-40) (-37) (-34) (-3) (-28) (-3) Total Carter SY b (-25) (-28) (-22) Tribol GmbH Tribol 800 b, c (-37) (-37) (-27) (-25) (-25) (-25) (-23) * ONLY ONE OIL GRADE AVAILABLE HENCE NO GRADE DESIGNATION + NOT SUITABLE FOR APPLICATIONS REQUIRING INDUSTRIAL EP ADDITIVES x THIS PARTICULAR IS COMPATIBLE WITH TYPES M, A, E AND H NOTE: TYPE G S WILL AFFECT CERTAIN GEARCASE PAINTS AND SHRINK CERTAIN SEALS, CONTACT OUR APPLICATION ENGINEERS BEFORE USE 6

8 Table H Polyalphaolefin based synthetic lubricants with Anti-Wear or EP additives. These have a medium high load carrying capacity. 0H H 2H 3H 4H 5H 6H 7H 8H 9H OIL S' CORRESPONDING DESIGNATIONS Bayle Freedom Group Titan b (-40) (-38) (-35) (-3) (-28) Boxer Services incorporated Silkgear b with Millers Oils Limited (-40) (-40) (-40) (-40) (-35) (-35) (-35) (-35) (-35) (-35) BP Oil International Limited Enersyn EPX b, e 320 (-28) Caltex Pinnacle EP b (-45) (-43) (-43) (-37) (-30) Carl Bechem GmbH Berusynth GP b (-49) (-42) (-38) (-35) (-32) Castrol International Alphasyn EP b, c (-43) (-37) (-3) (-3) Alphasyn T b (-49) (-43) (-43) (-35) (-3) (-3) (-28) (-28) (-6) (-6) Chevron Lubricants Tegra b (-46) (-46) (-33) (-3) (-25) Esso/Exxon Spartan Synthetic EP b, e, f (-52) (-49) (-46) (-43) (-40) Fuchs Lubricants Renogear SG b (-35) (-32) (-30) Renolin Unisyn CLP b (-46) (-40) (-40) (-37) (-34) (-28) (-28) Klüber Lubrication Klübersynth EG 4 b, e (-35) (-30) (-25) (-30) Kuwait Petroleum International Q8 Schumann b (-49) (-49) (-49) (-43) Q8 EL Greco b (-28) (-22) (-9) (-6) Lubrication Engineers Inc Synolec Gear Lubricant b 9920 (-40) Mobil Oil Company Limited Mobilgear SHC b (-40) (-37) (-32) (-29) Mobilgear SHC XMP b, c (-43) (-40) (-33) (-3) (-25) Optimol Ölwerke GmbH Optigear Synthetic A b (-40) (-3) (-3) Petro-Canada Super Gear Fluid b, e (-37) (-43) (-37) (-37) Shell Oils Omala HD b, c, f (-55) (-49) (-49) (-43) (-40) (-37) (-34) (-3) Texaco Limited Pinnacle EP b (-49) (-45) (-43) (-43) (-37) Pinnacle WM b, c (-43) (-43) (-40) Total Carter SP b (-37) (-34) (-3) (-28) (-3) Tribol GmbH Tribol 50 b (-44) (-4) (-36) (-33) (-28) (-25) NOTE: TYPE H S THAT DO NOT CONTAIN EP ADDITIVES AND ARE SUITABLE FOR USE IN WORM GEAR UNITS ARE LISTED ON PAGE 8 7

9 Table H Polyalphaolefin based synthetic lubricants Suitable for use in worm gear applications, do not contain EP additives 0H H 2H 3H 4H 5H 6H 7H 8H 9H OIL S' CORRESPONDING DESIGNATIONS BP Oil International Limited Enersyn HTX b, e (-3) (-3) (-25) Esso / Exxon Teresstic SHP b (-44) (-44) (-4) (-40) (-34) (-32) (-30) (-22) Mobil Oil Company Limited SHC 600 Series (-49) (-46) (-37) (-37) (-37) (-34) (-29) (-3) Shell Oils Omala RL (-55) (-52) (-49) (-43) (-40) (-37) (-34) (-3) 8

10 Table F Lubricants having incidental food contact approval 0F F 2F 3F 4F 5F 6F 7F 8F 9F OIL S' CORRESPONDING DESIGNATIONS Caltex Cygnus Gear, 4 b (-7) (-5) Castrol International Vitalube G 3, 4 b (-4) (-7) (-0) Vitalube GS 3, 4, 6 b (-3) (-3) (-3) Chevron Lubricants Lubricating Oil FM, 4*, 5 b (-4) (-4) (-4) (-4) (-4) (-4) Klüber Lubrication Klüberoil 4 UH 3, 4, 6 b (-30) (-30) (-30) (-30) (-30) (-30) (-30) (-25) Klübersynth UH 6 2, 4*, e, b , 6 (-30) (-25) (-25) Mobil Oil Company Limited Mobil DTE FM Series 3, 4 b (-) (-) (-) (-4) (-4) (-7) (-34) (-28) (-3) Omega Manufacturing Division Omega 585 3, 5, 6, 7 a, b H (-3) Optimol Ölwerke Optileb GT 3, 4, 6 b Industrie GmbH (-37) (-3) (-6) (-6) Petro-Canada Purity FG, 4 b (-7) (-4) (-4) (-4) (-4) Rocol Foodlube Hi-Torque 3, 4*, b , 6 (-25) (-25) (-25) (-5) Shell Oils Cassida 3, 4, 5 b HF32 HF46 HF68 HF00 HF50 GL220 GL320 GL460 GL680 (-45) (-45) (-45) (-45) (-45) (-43) (-43) (-40) (-35) Texaco Limited Cygnus Gear, 4 b (-7) (-5) Total Lubriplate FMD AW, 4* b (-2) (-2) (-0) (-0) (-7) (-4) Tribol GmbH Tribol 80, 4 b (-5) (-5) (-5) Mineral oil based 2 Polyglycol based synthetic 3 Polyolefin based synthetic 4 USDA H approved (* meets the former requirements of USDA H) 5 FDA approved 6 Mineral Hydrocarbon free 7 AQIS approved NOTE: Type F lubricants are approved for use in David Brown Gear Units. David Brown DO NOT give food approval for lubricants, please consult suppliers before use. 9

11 Table B Bio-degradable oils 0B B 2B 3B 4B 5B 6B 7B 8B 9B OIL S' CORRESPONDING DESIGNATIONS Caltex Biostar Gear a, b (-28) (-28) (-28) Castrol International Carelube GTG a, b, e (-9) (-25) Carelube GES a, b, e (-34) (-34) (-28) (-25) (-25) (-25) Klüber Lubrication Klüberbio CA a, b, e, f (-30) (-5) Klüberbio GM a, b, e, f (-20) Shell Naturelle HF-R a, b, e 32 (-3) Naturelle HF-E a, b, e (-45) (-34) Texaco Limited Biostar Gear a, b (-28) (-28) (-28) Total Biohydran SE b 46 (-43) NOTE: The use of Bio-degradable lubricants may adversly affect gear unit ratings, contact David Brown before use 0

12 GREASES Greases NLGI NUMBER OIL S' CORRESPONDING DESIGNATIONS BP Oil International Limited Energrease FG y 3 Energrease LS-EP w, x, y Caltex Coupling Grease x 3 Multifak EP w Carl Bechem GmbH Berulit GA 800 x, y 3 Castrol International CLS Grease y 3 LMX Grease w, x 3 Spheerol AP w, x 3 3 Spheerol EPL w, x Fuchs Lubricants Renolit EP w, y Klüber Lubrication Klüberlub BE w 3 Klüberplex GE -680 x, y 3 Klübersynth GE y 3 Microlube GB 0/00 w, y 3 3 Mobil Oil Company Limited Glygoyle Grease y 3 Mobilgrease XHP w Mobilith SHC w, x, y Mobilux EP x 3 Omega Manufacturing Division Omega 85 w, x, y 3 3 Optimol Ölwerke GmbH Longtime PD w, x, y Optitemp OG x, y 3 Shell Oils Albida RL w 3 3 Alvania EP B w, x, y 3 Alvania EP LF x, y Alvania GL y 3 Alvania WR2 x, y 3 Coupling Grease x 3 Nerita HV w 3 Semi Fluid EP x, y 3 Tivela Compound A y 3 Tivela Compound GL y 3 Texaco Limited Coupling Grease x, y 3 Multifak All Purpose EP w 3 Total Specis EPG x, y 3 NOTES: w Bearing Grease x Coupling Grease y Semi-Fluid Gear Unit Grease

13 GREASES Greases having USDA H incidental food contact approval 2 NLGI NUMBER OIL S' CORRESPONDING DESIGNATIONS Caltex RPM Poly FM w Chevron Lubricants FM Grease EP w Klüber Lubrication Klübersynth y 3 3 UH 4-5/600 Mobil Oil Company Limited Mobil Grease FM w, x, y Optimol Ölwerke GmbH Obeen UF w, x, y Petro-Canada Purity FG w, x, y 3 3 Rocol Foodlube Universal Grease w, x, y Shell Oils Cassida EPS w, y 3 3 Cassida RLS w, x, y 3 3 Texaco Limited Poly FM Grease w, x, y Total Lubriplate FGL y 3 3 NOTES: Greases with USDA H approval are approved for use in David Brown Gear Units. David Brown DO NOT give food approval for greases, please consult suppliers before use. 33 Two alternative products are available, please consult suppliers before use w x y Bearing Grease Coupling Grease Semi-Fluid Gear Unit Grease 2

14 CONTACTS AUSTRALIA DENMARK NETHERLANDS THAILAND David Brown Gear Industries Ltd 3-9 Franklin Avenue Bulli, NSW 256 Australia Tel: Fax: Benzler Transmission A/S Fuglebævej 3D DK-2770 Kastrup, Danmark Tel: Fax: Benzler TBA BV Jachthavenweg 2 NL-5928 NT Venlo Netherlands Tel: Fax: David Brown (Thailand) Ltd 700/43 Moo 6 Amata Nakorn Industrial Estate Tumbol Klongtumru Muang, Chonburi Thailand AUSTRIA Benzler Antriebstechnik GesmbH Tel: Fax: CHINA David Brown China Representative Office Floor 6, Lippo Plaza No. 222 Huai Hai Rd (M) Shanghai China Tel: Fax: FINLAND Oy Benzler AB Vanha Talvitie 3C FI Helsingfors, Finland Tel: Fax: FRANCE WECO Transmissions SA Tel: Fax: GERMANY Benzler Antriebstechnik GmbH Tel: Fax: NORWAY David Brown Benzlers A/S Stromsveien 32 P.O.Box 73 Leirdal N- 008 Oslo Norway Tel: Fax: SOUTH AFRICA David Brown Gear Industries Ltd 2 Birmingham Street, Benoni Industrial 500 South Africa Tel: Fax: SWEDEN Tel: Fax: UNITED KINGDOM David Brown Gear Systems Ltd Park Road Lockwood, Huddersfield West Yorkshire, HD4 5DD Tel: +44 (0) Fax: +44 (0) USA Cone Drive 240 East 2th Street Traverse City Michigan USA Tel: Fax: ITALY David Brown Hydraulics Italia S.R.L. Via Del Costrutre, Vignola (MO) Italy AB Benzlers Box 922 (Landskronavägen ) Helsingborg Sweden Tel: Fax: Tel: Fax:

15 Engineered around you David Brown Africa Australia China Europe Thailand United Kingdom Cone Drive & Benzlers Central & South America North America Scandinavia

Series M. C. F. K - Geared Motors Installation & Maintenance

Series M. C. F. K - Geared Motors Installation & Maintenance Series M. C. F. K - Geared Motors Installation & Maintenance IMC-1.00GB01/11 PRODUCT SAFETY Product Safety Information IMPORTANT General - The following information is important in ensuring safety. It

More information

GEARED MOTOR UNITS R, S, F, K SERIES INSTALLATION & MAINTENANCE GUIDE

GEARED MOTOR UNITS R, S, F, K SERIES INSTALLATION & MAINTENANCE GUIDE GEARED MOTOR UNITS R, S, F, K SERIES INSTALLATION & MAINTENANCE GUIDE INFORMATION Declaration of Conformity Products: R, S, F & K Series - Gear Units. Renold Gears hereby declares that products listed

More information

INDUSTRIAL REDUCER UNITS

INDUSTRIAL REDUCER UNITS INDUSTRIAL REDUCER UNITS H SERIES INSTALLATION & MAINTENANCE GUIDE CONTENTS PAGE Section Description Page No 1 Declaration of Conformity / Incorporation 1 1 General Information 2 2 Weather Protection 2

More information

Series BD - Screw Jacks Installation & Maintenance

Series BD - Screw Jacks Installation & Maintenance Series BD - Screw Jacks Installation & Maintenance IMC-1.00GB01/11 PRODUCT SAFETY Product Safety Information IMPORTANT General - The following information is important in ensuring safety. It must be brought

More information

5 Lubricants. Lubricants Guidelines for lubricant selection. 5.1 Guidelines for lubricant selection STOP

5 Lubricants. Lubricants Guidelines for lubricant selection. 5.1 Guidelines for lubricant selection STOP Guidelines for lubricant selection Lubricants. Guidelines for lubricant selection Unless a special arrangement is made, SEW-EURODRIVE delivers the planetary gear unit without an oil fill and the primary

More information

8 Design and Operating Notes

8 Design and Operating Notes Lubricants Design and Operating Notes.1 Lubricants General information Unless a special arrangement is made, SEW-EURODRIVE supplies the drives with a lubricant fill adapted for the specific gear unit and

More information

5 Lubrication, Cooling and Heating

5 Lubrication, Cooling and Heating Overview of the and cooling types Lubrication, and Heating.1 Overview of the and cooling types The following combinations of and cooling types are possible. Lubrication Splash with shaft end pump /SEP

More information

Catalogue geared motors. Edition 01/

Catalogue geared motors. Edition 01/ Catalogue geared motors Edition 0/0 Page Gearboxes and Lubrication Standard fitting - BG and BF - BK and BS Position of the terminal box and the cabel entry - BG and BF - BK and BS Radial and axial forces

More information

5 Gear units, types of installation, lubricant quantities. 5.1 Standard fitting positions/ types of installation for Bauer geared motors

5 Gear units, types of installation, lubricant quantities. 5.1 Standard fitting positions/ types of installation for Bauer geared motors 26 5 Gear units, types of installation, lubricant quantities 5.1 Standard fitting positions/ types of installation for Bauer geared motors 5 27 28 5.2 Position of the terminal box and the cable entry points

More information

6 Lubricants. 6 Design and Operating Notes. 6.1 Lubricants. General information

6 Lubricants. 6 Design and Operating Notes. 6.1 Lubricants. General information Lubricants Design and Operating Notes.1 Lubricants General information Unless a special arrangement is made, SEW supplies the drives with a lubricant fill adapted for the specific gear unit and mounting

More information

6 Design and Operating Notes

6 Design and Operating Notes Design and Operating Notes Lubricants Design and Operating Notes. Lubricants General information Unless a special arrangement is made, SEW-EURODRIVE supplies the drives with a lubricant fill adapted for

More information

Das Winkelgetriebe. Made in Germany. Service. bevel gearboxes. Miniature. gearboxes. Bevel. Hygiene-design. gearboxes. gearboxes.

Das Winkelgetriebe. Made in Germany.   Service. bevel gearboxes. Miniature. gearboxes. Bevel. Hygiene-design. gearboxes. gearboxes. Made in Germany Miniature bevel gearboxes Bevel gearboxes Das Winkelgetriebe Hygiene-design gearboxes Hypoid gearboxes Worm gearboxes Gearbox motors Servo gearboxes (precision gearboxes) Special gearboxes

More information

Engineered around you. Roloid Gear Pump. Gear Pumps CRP1.01GBD1209

Engineered around you.   Roloid Gear Pump. Gear Pumps CRP1.01GBD1209 Engineered around you www.davidbrown.com Roloid Gear Pump Gear Pumps CRP1.01GBD1209 ROLOID PRODUCTS IN THE RANGE Serving an entire spectrum of mechanical drive applications from food, energy, mining and

More information

6 Design and Operating Notes

6 Design and Operating Notes Lubricants and fill quantities GK 0 Design and Operating Notes. Lubricants and fill quantities General information Unless a special arrangement is made, SEW-EURODRIVE supplies the drives with a lubricant

More information

7 Design and Operating Notes

7 Design and Operating Notes Lubricants Design and Operating Notes.1 Lubricants General information Unless a special arrangement is made, SEW-EURODRIVE supplies the drives with a lubricant fill adapted for the specific gear unit and

More information

Handbuch für installation, betrieb und wartung Planetengetriebe

Handbuch für installation, betrieb und wartung Planetengetriebe Italy Headquarters Installation, use and maintenance manual Manuale Installazione Uso e Manutenzione Riduttori Epicicloidali Installation, Operation and Service Manual Handbuch für installation, betrieb

More information

5 Lubrication, Cooling, and Heating

5 Lubrication, Cooling, and Heating Lubrication,, and Heating Overview of the and cooling types Lubrication,, and Heating.1 Overview of the and cooling types The following combinations of and cooling types are possible. Lubrication Splash

More information

Gearmotors and Gear Reducers

Gearmotors and Gear Reducers Gearmotors and Gear Reducers OPERATING INSTRUCTIONS 01 805 52 US GENERAL These operating instructions are intended to help you install and operate the drive. For trouble free service, proper installation

More information

6 Design and Operating Notes

6 Design and Operating Notes Reduced backlash gear units GSE Design and Operating Notes.1 Reduced backlash gear units Helical, parallel shaft helical and helical-bevel gear units with reduced backlash are available from gear unit

More information

David Brown Sadiguard Torque Limiting Couplings Simply the best positive protection against overloads and jamming David Brown Sadiguard torque limiter

David Brown Sadiguard Torque Limiting Couplings Simply the best positive protection against overloads and jamming David Brown Sadiguard torque limiter David Brown Sadiguard Torque Limiting Couplings Simply the best positive protection against overloads and jamming David Brown Sadiguard torque limiters positive action eliminates the inaccuracies of shearing

More information

Examples of Applications

Examples of Applications Examples of Applications Optimum positioning of the tooth contact pattern is essential for a precise, low-noise bevel gear pairing. Angular milling head with ground bevel gear set by MS-Graessner. High-transmission

More information

Section 3.1. Machine Maintenance - Machine Maintenance Information. Important Preventive Maintenance Information: Maintenance Charts & Diagrams:

Section 3.1. Machine Maintenance - Machine Maintenance Information. Important Preventive Maintenance Information: Maintenance Charts & Diagrams: Section 3.1 Machine Maintenance - Maintenance Charts & Diagrams: Special Component Break-In Chart... 3.1.2 Preventive Maintenance Schedule Chart... 3.1.2 Lubrication Points Diagram... 3.1.3 Lubricant &

More information

Addendum to the Assembly and Operating Instructions

Addendum to the Assembly and Operating Instructions Drive Technology \ Drive Automation \ System Integration \ Services *235971_317* Addendum to the Assembly and Operating Instructions Industrial Gear Units X.. Series Helical and Bevel-Helical Gear Units

More information

Addendum to the Assembly and Operating Instructions

Addendum to the Assembly and Operating Instructions Drive Technology \ Drive Automation \ System Integration \ Services *2276652_1216* Addendum to the Assembly and Operating Instructions Industrial Gear Units X.. Series Helical and Bevel-Helical Gear Units

More information

Technical Bulletin. 550 Trimmer LUBRICATION

Technical Bulletin. 550 Trimmer LUBRICATION Technical Bulletin 550 Trimmer TB550-00 Sheet: 1 of 1 Issue: 14. 06. 010 LUBRICATION CATEGORY: Information for actory Implementation Summary: Some customers have experienced problems with understanding

More information

Danfoss Bauer GmbH Esslingen BA GB

Danfoss Bauer GmbH Esslingen BA GB Danfoss Bauer GmbH 73726 Esslingen Operating instructions Direct current permanent magnet geared motors BA 148 04 GB 1 Installation The drive must be assembled and connected by qualified personnel (skilled

More information

LUBRICATION OIL LIST FOR SIMPLEX STERN TUBE BUSHES, INTERMEDIATE SHAFT BEARINGS AND SEALS

LUBRICATION OIL LIST FOR SIMPLEX STERN TUBE BUSHES, INTERMEDIATE SHAFT BEARINGS AND SEALS LUBRICATION OIL LIST FOR SIMPLEX STERN TUBE BUSHES, INTERMEDIATE SHAFT BEARINGS AND SEALS The SIMPLEX seal is fitted with sealing rings of Perbunan or Viton depending on the operating conditions. The following

More information

Operating Instructions

Operating Instructions Operating Instructions Table of contents Table of contents... 1 1. Declaration... 1 2. Warranty and liability... 2 3. Gear description... 2 4. Gear types... 2 5. Safety... 3 5.1 General safety information...

More information

AccuDrive. Series P CAT.P.01/05.NA. AccuDrive Series P

AccuDrive. Series P CAT.P.01/05.NA. AccuDrive Series P AccuDrive CAT.P.01/05.NA Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 426-5480 www.cmafh.com Series P Courtesy of CMA/Flodyne/Hydradyne Motion Control

More information

KS TWINGEAR. Compact, precise and powerful.

KS TWINGEAR. Compact, precise and powerful. MS-Graessner GmbH & Co. KG THE GEAR COMPANY Compact, precise and powerful Precision combines with performance. Bevel gear technology is at the heart of an assembly consisting of gear housing, shafts, flanges

More information

PILOT SUPPLY UNITS Series SUH - INTRODUCTION

PILOT SUPPLY UNITS Series SUH - INTRODUCTION SH SERIES PILO SPPLY NIS PILO SPPLY NIS Series SH - INRODCION PILO SPPLY NIS he SH is a direct acting pressure reducing valve which can be connected to either one or two main circuits via ports and. Both

More information

Series H Industrial Gearbox

Series H Industrial Gearbox Series H Industrial Gearbox Industrial Gearbox CH-2.00GB1211 PRODUCTS IN THE RANGE Serving an entire spectrum of mechanical drive applications from food, energy, mining and metal; to automotive, aerospace

More information

General Description 1. Unit Designations & Ordering 2. Design Features 3-4. Explanation and use of Ratings and Service Factors 6-9

General Description 1. Unit Designations & Ordering 2. Design Features 3-4. Explanation and use of Ratings and Service Factors 6-9 Series H CAT.00000 CONTENTS 9709 General Description 1 Unit Designations & Ordering 2 Design Features 3-4 Shaft Sealing Arrangements 5 Explanation and use of Ratings and Service Factors 6-9 Selection Procedure

More information

Tabelle A-a Standardmineralöle für FLENDER Stirnrad-, Kegelrad-, Planetengetriebe und 'Marinegetriebe ohne Lamellenkupplung' sowie Getriebemotoren

Tabelle A-a Standardmineralöle für FLENDER Stirnrad-, Kegelrad-, Planetengetriebe und 'Marinegetriebe ohne Lamellenkupplung' sowie Getriebemotoren Approved lubricants --- Freigegebene Schmierstoffe T 7300 Table A-a Standard mineral oils for FLENDER helical, bevel-helical, planetary gear boxes and 'Marine gear Tabelle A-a Standardmineralöle für FLENDER

More information

POWER GEAR. The high performance bevel gearbox.

POWER GEAR. The high performance bevel gearbox. MS-Graessner GmbH & Co. KG THE GEAR COMPANY The high performance bevel gearbox Precision combines with performance. Bevel gear technology is at the heart of an assembly consisting of gear housing, shafts,

More information

POWER GEAR The high performance bevel gearbox

POWER GEAR The high performance bevel gearbox MS-Graessner GmbH & Co. KG THE GEAR COMPANY The high performance bevel gearbox Precision combines with performance. Bevel gear technology is at the heart of an assembly consisting of gear housing, shafts,

More information

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) CAT.E.03/09.

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) CAT.E.03/09. 1 CAT.E.03/09.NA 0206 Now you can get design flexibility and lasting performance from our complete family of Precision Products. Series W Precision Servo Gearhead. Output torque up to 8,500 lb.in. Motor

More information

TABLE OF CONTENTS. Shaft Mounted Planetgear Speed Reducer Owners Manual Type SMP Size Hercules (Page 1 of 21)

TABLE OF CONTENTS. Shaft Mounted Planetgear Speed Reducer Owners Manual Type SMP Size Hercules (Page 1 of 21) Type SMP Size Hercules (Page 1 of 21) TABLE OF CONTENTS Section I Introduction Basic Operation and Design...2 Sectional View and Component Identification...2 Nameplate Information....3 Section II Installation

More information

314 ORDINARY MAINTENANCE MANUAL FOR. PGA series VERTICAL MOUNTING POSITION. Release A02/15

314   ORDINARY MAINTENANCE MANUAL FOR. PGA series VERTICAL MOUNTING POSITION. Release A02/15 314 www.comerindustries.com ORDINARY MAINTENANCE MANUAL FOR PGA series VERTICAL MOUNTING POSITION Release A02/15 INDEX General information...page 3 Ordinary maintenance...page 4 Oil lubricant replacement...page

More information

TABLE OF CONTENTS. Shaft-Mounted Planetgear Speed Reducer Owners Manual Type SMP Size Jupiter (Page 1 of 23)

TABLE OF CONTENTS. Shaft-Mounted Planetgear Speed Reducer Owners Manual Type SMP Size Jupiter (Page 1 of 23) Type SMP Size Jupiter (Page 1 of 23) TABLE OF CONTENTS Section I Introduction Basic Operation and Design... 2 Sectional View and Component Identification... 2 Nameplate Information... 3 Section II Installation

More information

3 Mounting Positions and Important Order Information

3 Mounting Positions and Important Order Information General information on mounting positions M1 Mounting Positions and Important Order Information.1 General information on mounting positions Mounting position designation SEW differentiates between si mounting

More information

Series J Shaft Mounted Gearbox

Series J Shaft Mounted Gearbox www.radicon.com Series J Shaft Mounted Gearbox Technical Up to - 600kW /57,000 Nm Industrial Gearbox CJ-1.00GBD0111 PRODUCTS IN THE RANGE Serving an entire spectrum of mechanical drive applications from

More information

Series H Industrial Gearbox

Series H Industrial Gearbox Series H Industrial Gearbox Industrial Gearbox CH-2.00GB1211 PRODUCTS IN THE RANGE Serving an entire spectrum of mechanical drive applications from food, energy, mining and metal; to automotive, aerospace

More information

Seamer Lubrication. Suggestions, Requirements. & Specifications. By Pneumatic Scale Angelus

Seamer Lubrication. Suggestions, Requirements. & Specifications. By Pneumatic Scale Angelus Seamer Lubrication Suggestions, Requirements & Specifications By Pneumatic Scale Angelus CAUTION: Contact your lubricant suppliers to verify the compatibility of lubricant with paints and components on

More information

Approved Suppliers

Approved Suppliers EN Page 1/8 Change information: Chap. /page Description (changes to the previous edition) Modification no. Page 7 CLP HC 320 / Mobil SHC Gear 320 / highest oil bath temperature changed from 95 C to 100

More information

Operating instructions Gear Boxes and Geared Motors ZUVERLÄSSIG ANTREIBEND EFFIZIENT

Operating instructions Gear Boxes and Geared Motors ZUVERLÄSSIG ANTREIBEND EFFIZIENT Operating instructions Gear Boxes and Geared Motors ZUVERLÄSSIG NTREIBEND EFFIZIENT Edition 05/2016 Table of contents 1. Introduction.............................................................................

More information

TABLE OF CONTENTS. Falk RAM Parallel Shaft Mixer Drives Owners Manual Sizes 20 thru 22 Types HMX & HMH (Page 1 of 48)

TABLE OF CONTENTS. Falk RAM Parallel Shaft Mixer Drives Owners Manual Sizes 20 thru 22 Types HMX & HMH (Page 1 of 48) Falk RAM Parallel Shaft Mixer Drives Owners Manual s 20 thru 22 Types HMX & HMH (Page 1 of 48) TABLE OF CONTENTS SECTION I INSTALLATION General Information Drive Description & Identification...3 Nameplate

More information

EN Page 1/9 EGT-TD Lubricant approvals latest version:

EN Page 1/9 EGT-TD Lubricant approvals latest version: EN Page 1/9 Change information: Chap. /page Description (changes to the previous edition) Modification no. General 1.3 / 4 1.4 / 5 1.5 / 6 SEW lubricants added. Lubricant supplier Texaco deleted. Chapter

More information

+ Shuttle block (Only for 1/4" BSP)*

+ Shuttle block (Only for 1/4 BSP)* HV SERIES HYDRAULIC ILO CONROLS 23 to 51 cm 3 /rev (1.4 to 3.1 cu.in/rev) 280 bar (4000 psi) peak pressure HYDRAULIC ILO CONROLS Series HV - INRODUCION HYDRAULIC ILO CONROL HV ilot Control Valves are part

More information

M6 General notes on mounting positions R, F, K, S, W gear units

M6 General notes on mounting positions R, F, K, S, W gear units M M M General notes on mounting positions R, F, K, S, W gear units Preiskatalog Gear Unit Mounting Positions. General notes on mounting positions R, F, K, S, W gear units SEW-EURODRIVE differentiates between

More information

Section 3.1. Machine Maintenance - Machine Maintenance Information

Section 3.1. Machine Maintenance - Machine Maintenance Information Section 3.1 Machine Maintenance - Maintenance Charts & Diagrams: Special Component Break-In Chart... 3.1.2 Preventive Maintenance Schedule Chart... 3.1.2 Lubricant & Fill Capacities Chart... 3.1.4 Engine

More information

Series BS (Compact Worm Gear) CBS-1.00GBD0108. Technical Up to - 4 kw / 315 Nm WORM GEARBOX.

Series BS (Compact Worm Gear) CBS-1.00GBD0108. Technical Up to - 4 kw / 315 Nm WORM GEARBOX. CBS-1.00GBD0108 Series BS (Compact Worm Gear) Technical Up to - 4 kw / 315 Nm WORM GEARBOX www.davidbrown.com SERIES BS PRODUCTS IN THE RANGE Serving an entire spectrum of mechanical drive applications

More information

Certified Quality System UNI EN ISO 9001 : 2008 SERVICE MANUAL PGRF series Release A10/14

Certified Quality System UNI EN ISO 9001 : 2008 SERVICE MANUAL PGRF series Release A10/14 312 Certified Quality System UNI EN ISO 9001 : 2008 www.comerindustries.com SERVICE MANUAL PGRF series Release A10/14 INDEX GENERAL INFORMATION... 3 GEARBOX UNIT IDENTIFICATION... 3 RISKS AND PRECAUTIONS...

More information

ML XXX XXX-XXX. How to Order a MEMOLUB High Pressure Lubricator ORDERING INFORMATION SHEET. There are two steps to ordering a new MEMOLUB lubricator :

ML XXX XXX-XXX. How to Order a MEMOLUB High Pressure Lubricator ORDERING INFORMATION SHEET. There are two steps to ordering a new MEMOLUB lubricator : ORDERING INFORMATION SHEET How to Order a MEMOLUB High Pressure Lubricator There are two steps to ordering a new MEMOLUB lubricator : Step 1 - Choose the model and size of the MEMOLUB lubricator Models

More information

Table A-c Standard PAO oils for FLENDER helical, bevel-helical, planetary gear boxes and 'Marine gear units without multi-disk clutches'

Table A-c Standard PAO oils for FLENDER helical, bevel-helical, planetary gear boxes and 'Marine gear units without multi-disk clutches' Approved lubricants --- Freigegebene Schmierstoffe Table A-c Standard PAO oils for FLENDER helical, bevel-helical, planetary gear boxes and 'Marine gear units Tabelle A-c Standard-PAO-Öle für FLENDER Stirnrad-,

More information

DOCUMENTATION - INSTALLATION _ MAINTENANCE

DOCUMENTATION - INSTALLATION _ MAINTENANCE Bevel gears DOKUMENTATION BETRIEBS_ UND WARTUNGSANLEITUNG DOCUMENTATION - INSTALLATION _ MAINTENANCE FOR BEVEL GEARS 1 Bevel gears Radial forces Permissible radial load (stress) on input (d 1 ) and output

More information

Gearboxes and Lubrication Standard fitting Position of the terminal box and the cabel entry

Gearboxes and Lubrication Standard fitting Position of the terminal box and the cabel entry Geared motors for electric overhead conveyors series B Edition 0/ Gearboxes and Lubrication Standard fitting Position of the terminal box and the cabel entry Page Lubricant quantities Gear ventilation

More information

W Series W. AccuDrive. AccuDrive Family of Products. Series S Series P Model RG Series E

W Series W. AccuDrive. AccuDrive Family of Products. Series S Series P Model RG Series E W.0907.13 Series W AccuDrive AccuDrive Family of Products Series S Series P Model RG Series E ACCUDRIVE PRECISION PRODUCTS Now you can get design flexibility and lasting performance from our complete family

More information

FLOTAX FC 1. TABLE OF CONTENT FLOTAX FC. Installation & Maintenance Manual ATEX UNIT SHIPPED WITHOUT OIL

FLOTAX FC 1. TABLE OF CONTENT FLOTAX FC. Installation & Maintenance Manual ATEX UNIT SHIPPED WITHOUT OIL ATEX UNIT SHIPPED WITHOUT OIL 1. TABLE OF CONTENT 1. Table of content... 1 2. Scope... 2 3. Sipping... 2 4. Maintenance... 2 5. Installation... 2 5.1. Mounting position... 2 5.2. Torque arm assembly...

More information

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 426-5480 www.cmafh.com AccuDrive Series W Servo Gearhead THREE LEVELS OF PRECISION Zero Backlash - absolute

More information

INSTALLATION MANUAL MAGNETIC DRUM SEPARATOR IN HOUSING TOLL FREE:

INSTALLATION MANUAL MAGNETIC DRUM SEPARATOR IN HOUSING TOLL FREE: INSTALLATION MANUAL MAGNETIC DRUM SEPARATOR IN HOUSING TOLL FREE: 888.582.0821 P.O. #: Order #: Part #: Sold To: Ship To: Table of Contents Installation Guidelines Pg 1 Operating Principle Pg 1 Maintenance

More information

OPERATING INSTRUCTIONS. E Series Worm Gearboxes OIECE

OPERATING INSTRUCTIONS. E Series Worm Gearboxes OIECE OPERATING INSTRUCTIONS Worm Gearboxes OIECE0300-048 Contents Contents... 02 - How To Use This Manual... 04 2- Type Designation... 05 2. Detailed unit designation... 05 2.2 Nameplate unit designation...

More information

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) MODEL RG RG

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) MODEL RG RG RG. 0906.16 1 0107 HOLLOW SHAFT STANDARD Compact mounting saves space No coupling required saves costs Solid shaft also available for maximum flexibility EASY MOTOR MOUNTING Integrated zero backlash coupling

More information

Operating Instructions

Operating Instructions ISO 9001 ISO 9001 Gear Units OIVCE0101/0514 Operating Instructions Contents Contents... 02 1 - How to Use This Manual... 04 2 - Unit Designation... 05 2.1- Detailed Unit Designation... 05 2.2- Nameplate,

More information

6 Design and operating notes

6 Design and operating notes Error! B ookmark not d efined.error! Boo kmark not defin ed. Error! B ookmark not d efined.error! Boo kmark not defin ed. and operating notes Lubricants and operating notes.1 Lubricants.1.1 General information

More information

Falk RAM Mixer Drives Installation and Maintenance MDXU MDXQ

Falk RAM Mixer Drives Installation and Maintenance MDXU MDXQ Types MDX, MDXQ, MDXT, MDH & MDHQ Sizes 00 thru 900 (Page 1 of 15) HOW TO USE THIS MANUAL This manual provides detailed instructions on installation and maintenance of gear drives and couplings. Use the

More information

Installation and Maintenance Helical and Bevel Helical Gearboxes KUMERA POWER TRANSMISSION GROUP

Installation and Maintenance Helical and Bevel Helical Gearboxes KUMERA POWER TRANSMISSION GROUP Installation and Maintenance Helical and Bevel Helical Gearboxes KUMERA POWER TRANSMISSION GROUP KUMERA DRIVES OY Kumerankatu 2 FI-11100 Riihimäki FINLAND Tel. +358 20 755 4200 Fax +358 20 755 4220 E-mail

More information

Planning Section. Environmental conditions. Different power supply. Industrial solutions

Planning Section. Environmental conditions. Different power supply. Industrial solutions Planning Section 86 89 Environmental conditions Different power supply 90 Industrial solutions 91 Power calculation and selection of the Motorized Pulley for package transportation 93 Oil types and contents

More information

not just a gear unit - every component manufactured with pride to exceed ISO 9000 standards by ISO 9000 certified manufacturer.

not just a gear unit - every component manufactured with pride to exceed ISO 9000 standards by ISO 9000 certified manufacturer. powerdrive SMGU - the ORIGINAL and the BEST not just a gear unit - every component manufactured with pride to exceed ISO 9000 standards by ISO 9000 certified manufacturer. technidrive www.technidrive.com

More information

RFP # 6632 EXHIBIT 3 Technical Specifications Supply of Wärtsilä Gas Engine Lubrication Oil and Cooling System Glycol

RFP # 6632 EXHIBIT 3 Technical Specifications Supply of Wärtsilä Gas Engine Lubrication Oil and Cooling System Glycol RFP # 6632 EXHIBIT 3 Technical Specifications Supply of Wärtsilä Gas Engine Lubrication Oil and Cooling System Glycol A. PURPOSE The City of Denton is providing information that will allow prospective

More information

AccuDrive Family of Products. Series W Series P Model RG Series E

AccuDrive Family of Products. Series W Series P Model RG Series E S.0109.01 Series S AccuDrive AccuDrive Family of Products Series W Series P Model RG Series E ACCUDRIVE PRECISION PRODUCTS Now you can get design flexibility and lasting performance from our complete family

More information

Roloid Gear Pump Installation & Maintenance

Roloid Gear Pump Installation & Maintenance Roloid Gear Pump Installation & Maintenance IMC-1.00GB01/11 PRODUCT SAFETY Product Safety Information IMPORTANT General - The following information is important in ensuring safety. It must be brought to

More information

Edition. Planetary Gear Units P..RF.., P..KF.. Series 12/2002. Operating Instructions X / EN

Edition. Planetary Gear Units P..RF.., P..KF.. Series 12/2002. Operating Instructions X / EN Planetary Gear Units P..RF.., P..KF.. Series Edition 12/2002 Operating Instructions 1055 291X / EN SEW-EURODRIVE Contents M1 M6 1 Important Notes... 4 2 Safety Notes... 5 2.1 Extended storage... 7 2.2

More information

Your Partner in Solutions 24/7. EMAW Worm Gearboxes. Tel: Fax: Web:

Your Partner in Solutions 24/7. EMAW Worm Gearboxes. Tel: Fax: Web: Your Partner in Solutions 24/7 EMAW Worm Gearboxes Tel: 01902 601 403 Fax: 01902 601 408 Email: sales@emag-ltd.co.uk Web: www.emag-ltd.co.uk Worm Gear Units - Installation & Lubrication To install the

More information

Falk Enclosed Gear Drives Installation and Maintenance. Type A Series Sizes 305 thru 585 (Page 1 of 17) Type ABRC

Falk Enclosed Gear Drives Installation and Maintenance. Type A Series Sizes 305 thru 585 (Page 1 of 17) Type ABRC Type A Series Sizes 305 thru 585 (Page 1 of 17) HOW TO USE THIS MANUAL This manual provides detailed instructions on installation and maintenance of parallel shaft Types A, AR, AXV and right angle Types

More information

Operating, lubrication and maintenance instructions for gearboxes and motors

Operating, lubrication and maintenance instructions for gearboxes and motors Operating, lubrication and maintenance instructions for gearboxes and motors Index of contents General notes... 3 Worm gears... 4 Helical bevel gears, helical gears and slip-on gears... 5 Helical Bevel

More information

Shaft Mounted Planetgear Speed Reducer Owners Manual Type SMP Size Orion (Page 1 of 20)

Shaft Mounted Planetgear Speed Reducer Owners Manual Type SMP Size Orion (Page 1 of 20) Shaft Mounted Planetgear Speed Reducer Owners Manual Type SMP Size Orion (Page 1 of 20) TABLE OF CONTENTS Section I Introduction Basic Operation and Design... 2 Sectional View and Component Identification...

More information

Catalog. Industrial Gear Units Planetary Gear Unit Series XP130 - XP250 Torque Range from 600 to 5200 knm * _0415*

Catalog. Industrial Gear Units Planetary Gear Unit Series XP130 - XP250 Torque Range from 600 to 5200 knm * _0415* Drive Technology \ Drive Automation \ System Integration \ Services *21249792_0415* Catalog Industrial Gear Units Planetary Gear Unit Series XP130 - XP250 Torque Range from 600 to 5200 knm Edition 04/2015

More information

NMRV - MCV - NRV NMRV+NMRV PC+NMRV

NMRV - MCV - NRV NMRV+NMRV PC+NMRV MAINTENANCE AND OPERATING INSTRUCTIONS FOR WORM GEAR REDUCERS AND GEARMOTORS SERIES: NMRV - MCV - NRV NMRV+NMRV PC+NMRV GB NMRV-UM-9 99/01 rev.15.07.99 2 Warehouse storage When moving the unit, care should

More information

Vitrea oil 75 75mm2 Oil Vitrea Oil Oil 75W 75W 75W 75W 75W Vitrea oil Vitrea Vitrea Oil Vitrea Oil Vitrea Oil Vitrea Oil Vitrea Oil

Vitrea oil 75 75mm2 Oil Vitrea Oil Oil 75W 75W 75W 75W 75W Vitrea oil Vitrea Vitrea Oil Vitrea Oil Vitrea Oil Vitrea Oil Vitrea Oil Vitrea oil 75 24-2-2013 Pebeo Vitrea 160 Glass Paint Thinner is used with Pebeo paint and thins the paint without breaking it down. Always use the thinner rather then water as. Shell Products Clearance

More information

Installation and Maintenance. Helical and Bevel Helical Gear Units KUMERA POWER TRANSMISSION GROUP

Installation and Maintenance. Helical and Bevel Helical Gear Units KUMERA POWER TRANSMISSION GROUP Installation and Maintenance Helical and Bevel Helical Gear Units KUMERA POWER TRANSMISSION GROUP 2/37 Gear unit installation and maintenance 84 80 27A Kumera Drives Oy Headquarters Kumerankatu 2 FI-11100

More information

Roloid Gear Pump. Gear Pump CRP-2.00GB1211

Roloid Gear Pump. Gear Pump CRP-2.00GB1211 Roloid Gear Gear CRP-2.00GB1211 PRODUCTS IN TH RANG Serving an entire spectrum of mechanical drive applications from food, energy, mining and metal; to automotive, aerospace and marine propulsion, we are

More information

MOTORIZED PULLEYS UNIT HANDLING

MOTORIZED PULLEYS UNIT HANDLING 2 ED. MOT EN 03/14 2 ED. MOT EN 03/14 MOTORIZED PULLEYS UNIT HANDLING GENERAL CATALOGUE MOTORIZED PULLEYS UNIT HANDLING GENERAL CATALOGUE AXIS & Stuifmeel BV Coenecoop 1 2741 PG Waddinxveen Netherlands

More information

EFFICIENCY OPTIMIZATION OF TRIBOSYSTEMS BY SILICON COATING

EFFICIENCY OPTIMIZATION OF TRIBOSYSTEMS BY SILICON COATING EFFICIENCY OPTIMIZATION OF TRIBOSYSTEMS BY SILICON COATING Wind Energy Automotive Marine Industry Content Company and Products Technology Scientific tests 2-disc Sealing durability Pin on disc Examples

More information

LUBRICANT LIST FOR STERNTUBE SEALS <FOR SEAL TYPE AX, CX, DX>

LUBRICANT LIST FOR STERNTUBE SEALS <FOR SEAL TYPE AX, CX, DX> BASE MAKER AEGEAN LUBRICANT LIST STERNTUBE SEALS < SEAL TYPE AX, CX, DX> ALFAMAR 340, 440 ALFASYS 305 BRAND CLADIUM 50 SAE 30 CLADIUM 120 SAE 30, 40 AGIP CLADIUM 300 SAE 30, 40 CLADIUM 400 SAE 30, 40 OTE

More information

PRODUCT CATALOGUE. HK Gear Couplings

PRODUCT CATALOGUE. HK Gear Couplings PRODUCT CATALOGUE HK Gear Couplings Table of contents 1. SELECTION 5 2. EXAMPLE OF SELECTION 6 3. HOW TO ORDER 7 4. COUPLING GUARDS 8 5. INSTALLATION 8 6. ALIGNMENT OF THE SHAFTS 9 7. LUBRICATION 11 8.

More information

THE SHELL OMALA G SPECIALITY. Enclosed industrial spur and bevel gears where extra shock-load protection is needed or particulate contamination occurs

THE SHELL OMALA G SPECIALITY. Enclosed industrial spur and bevel gears where extra shock-load protection is needed or particulate contamination occurs SHELL OMALA INDUSTRIAL GEAR OILS The Shell Omala range of industrial gear oils is designed to help make it easy for equipment operators to select the Shell oil that will best deliver value to their operations

More information

Technical Information

Technical Information CYCLO 6 5 Technical Information Technical Information Technical Information 5.1 CYCLO 6 Lubrication Cyclo are either Grease lubricated or Oil lubricated. Refer to pages 5.3 and 5.4 to determine the unit

More information

M-Version. TP & TP-High Torque. Operating Manual. TP Low-backlash planetary gear. S-Version. K-Version

M-Version. TP & TP-High Torque. Operating Manual. TP Low-backlash planetary gear. S-Version. K-Version M-Version TP & TP-High Torque S-Version K-Version TP Low-backlash planetary gear Operating Manual Operating Manual TP 1 Contents 1 Contents... 2 1.1 Service Contact... 2 2 General Information... 3 2.1

More information

Pneumatic Motors. Pneumatic Motors PMW PMW 530. Installation- operating instructions. Katalog-Nr.: A UK

Pneumatic Motors. Pneumatic Motors PMW PMW 530. Installation- operating instructions. Katalog-Nr.: A UK Pneumatic Motors Pneumatic Motors PMW 160 - PMW 530 Installation- operating instructions Katalog-Nr.: Contents PMW 160 - PMW 530 Page 2 Contents Designation... Page Transportation- and storing instructions...

More information

Geared motors. G-motion const. G-motion const

Geared motors. G-motion const. G-motion const Geared motors G-motion const G-motion const Product code Geared motors Type designation Gearbox Gearbox No. of Input Output Drive size type size stages design design G G G G G S F K K S T L S R S Helical

More information

Addendum to the Assembly and Operating Instructions

Addendum to the Assembly and Operating Instructions Drive Technology \ Drive Automation \ System Integration \ Services *205516_017* Addendum to the Assembly and Operating Instructions Industrial Gear Units Motor Pump with Pressure Lubrication /ONP1L Edition

More information

OPERATING AND MAINTENANCE INSTRUCTIONS PUMP TYPE

OPERATING AND MAINTENANCE INSTRUCTIONS PUMP TYPE OPERATING AND MAINTENANCE INSTRUCTIONS PUMP TYPE 216.40 To Pump model Pump number Our order Your order Order date Reference Item number Destination Plant Before storing, installation, operation or maintenance

More information

Section 3.1. Machine Maintenance - Machine Maintenance Information. Important Preventive Maintenance Information: Maintenance Charts & Diagrams:

Section 3.1. Machine Maintenance - Machine Maintenance Information. Important Preventive Maintenance Information: Maintenance Charts & Diagrams: Section 3.1 Machine Maintenance - Machine Maintenance Information Maintenance Charts & Diagrams: Special Component Break-In Chart... 3.1.2 Preventive Maintenance Schedule Chart... 3.1.2 Lubrication Points

More information

SIZES FROM 1, ,000 NM CROWNED GEAR COUPLINGS

SIZES FROM 1, ,000 NM CROWNED GEAR COUPLINGS BZ SIZES FROM 1,300-348,000 NM CROWNED GEAR COUPLINGS GENERAL INFORMATION ABOUT R+W CROWNED GEAR COUPLINGS: CROWNED GEAR COUPLINGS BZ FIT CLEARANCE Overall shaft / hub clearance of 0.01-0.05 mm TEMPERATURE

More information

HOW TO USE THIS MANUAL

HOW TO USE THIS MANUAL Falk Drive One Model C Enclosed Gear Drives Owners Manual Type D Series s M1130 thru M1210 (Page 1 of 29) HOW TO USE THIS MANUAL This manual provides detailed instructions on installation and maintenance

More information

FAMILY OF PRODUCTS MEROPA GEAR OILS CHEVRON LUBRICANTS CAN HELP YOU RUN BETTER LONGER

FAMILY OF PRODUCTS MEROPA GEAR OILS CHEVRON LUBRICANTS CAN HELP YOU RUN BETTER LONGER FAMILY OF PRODUCTS MEROPA GEAR OILS CHEVRON LUBRICANTS CAN HELP YOU RUN BETTER LONGER LUBRICANTS FOR MEROPA GEAR OILS We understand the maintenance value drivers in gear lubrication. Let us help your organization

More information

How to Use This Manual. Table of Contents. Introduction. Installation Instructions. Warranty GR3-015

How to Use This Manual. Table of Contents. Introduction. Installation Instructions. Warranty GR3-015 Falk Ultramite UC Mixer Installation & Maintenance Instructions Types UCXV & UCFV Sizes 307 thru 316 (Page 1 of 6) How to Use This Manual This manual provides detailed instructions on installation and

More information

HL - MHL SPA SOCIETÀ ITALIANA TRASMISSIONI INDUSTRIALI. INSTALLATION, OPERATION and MAINTENANCE MANUAL

HL - MHL SPA SOCIETÀ ITALIANA TRASMISSIONI INDUSTRIALI. INSTALLATION, OPERATION and MAINTENANCE MANUAL SPA SOCIETÀ ITALIANA TRASMISSIONI INDUSTRIALI HL - MHL TM INSTALLATION, OPERATION and MAINTENANCE MANUAL 03.2005 Table of contents Contacting our service department... 4 Operation... 5 Maintenance... 6

More information

XCEL Series of Turbine Mixers

XCEL Series of Turbine Mixers TABLE OF CONTENTS - TABLE OF CONTENTS Bulletin 01-050 (Recommended bolting torques)..pg.1 Bulletin 02-135 (Installation of Mixer Drive Size 15 to 19)..Pg. 2 Bulletin 04-135 (Maintenance of Mixer Drive

More information