PILOT SUPPLY UNITS Series SUH - INTRODUCTION

Size: px
Start display at page:

Download "PILOT SUPPLY UNITS Series SUH - INTRODUCTION"

Transcription

1 SH SERIES PILO SPPLY NIS

2 PILO SPPLY NIS Series SH - INRODCION PILO SPPLY NIS he SH is a direct acting pressure reducing valve which can be connected to either one or two main circuits via ports and. Both ports feed through a shuttle valve to prevent circuit interaction. Reduced pressure is supplied to port and. A pre-set relief valve is fitted to prevent over pressure, and the unit is supplied with an accumulator connection for emergency power supply. An solenoid attachment is available to act as a safety system and to maintain the accumulator charge for a longer period by preventing leakage downstream from the ports. Also a version is available with integral filter to protect the output line and hence downstream components. David Brown Hydraulics reserve the right to update the information and data contained in this catalogue at any time. BENEFIS Compact unit Optional accumulator for peak and emergency power Optional 2 way & 3 way, 12 or 24 V DC solenoid valves for safety and extended accumulator storage time Dual ports for maximum installation flexibility ECHNICAL FEARES Input pressure P : Min 8 bar, Max 350 bar Output pressure s (nominal) : 30 bar Max pressure on drain port : 3 bar Relief valve setting (nominal) : 45 bar Max accumulator pressure : 210 bar (Nitrogen pre-charge 13 bar) Flow capacity at ports S : 5 l/min without accumulator : up to 40 l/min with accumulator Hydraulic fluids : ISO HM & HV bio-degradeable fluids Fluid temperature range : -20 to +80 o C Fluid viscosity : 2.8 to 380 mm 2 /sec Maximum filter rating : 25µm (absolute) Description Weight (kg) BASIC SH VALVE LIRE ACCMLAOR LIRE ACCMLAOR LIRE ACCMLAOR WAY SELECOR WAY SELECOR 0.70 SH SERIES MODEL CODING SH XXX - XXX X XXX Example: Standard valve set at 30 bar, with 12 Volt solenoid valve and 0.35 litre accumulator ordering number: SH 030 A22 L 035 Accumulator sizes 000 = No accumulator 035 = 0.35 litre accumulator 075 = 0.75 litre accumulator 150 = 1.50 litre accumulator Accumulator options L = with accumulator W = without accumulator P = with provision for accumulator Control options A00 = standard valve A22 = with 2 way selector 12 V DC solenoid A24 = with 2 way selector 24 V DC solenoid A32 = with 3 way selector 12 V DC solenoid A34 = with 3 way selector 24 V DC solenoid Pressure setting 025 = 25 bar 030 = 30 bar 035 = 35 bar SH = Supply unit - hydraulic 040 = 40 bar 050 = 50 bar 2

3 PILO SPPLY NIS Series SH - ECHNICAL DAA SH-xxx-A00-W-000 standard valve with no accumulator and no provision for an accumulator 38.5(1.52) 53.5(2.11) 134.8(5.31) 90(3.54) 10(.39) 70(2.76) M8X (.55) 17(.67) (3.23) 53(2.09) 51(2.01) 19(.75) 37(1.46) 25.5(1) 35(1.38) 64.5(2.54) SH-xxx-A00-P-000 standard valve with no accumulator and with provision for an accumulator 38.5(1.52) 53.5(2.11) 134.8(5.31) 90(3.54) 10(.39) 70(2.76) M8X (.55) 17(.67) (3.23) 64(2.52) 53(2.09) 51(2.01) 19(.75) 37(1.46) 25.5(1) 35(1.38) 64.5(2.54) 3

4 PILO SPPLY NIS Series SH - ECHNICAL DAA SH-xxx-A00-L-xxx standard valve with accumulator / with no solenoid A B 15 (0.59) YPICAL SANDARD VALVE For dimensions see page 3 C Accumulator Capacity A Accumulator Length B Overall nit Length C Maximum Diameter SH-xxx-A00-L-035 SH-xxx-A00-L-075 SH-xxx-A00-L litres 0.75 litres 1.50 litres 162 (6.38) 200 (7.87) 295 (11.61) 302 (11.89) 340 (13.39) 435 (17.13) 99 (3.90) SH-xxx-A22-L-xxx valve with accumulator and 12V DC 2-way solenoid SH-xxx-A34-L-xxx valve with accumulator and 24V DC 3-way solenoid For dimensions including accumulators see above SANDARD VALVE For dimensions see page 3 For dimensions including accumulators see above SANDARD VALVE For dimensions see page 3 37 (1.46) 11 (0.43) 104 (4.09) 164 (6.46) 60 (2.36) 114 (4.49) 174 (6.85) 48.5 (1.91) 5 (0.20) 60 (2.36) 120 (4.72) 4

5 Global Hydraulics combines the businesses of David Brown Hydraulics, Hydreco, and Powauto and supports worldwide customers with application expertise and famously reliable products. he Global Hydraulics range includes pumps, motors, valves, pilot valves and power take offs to provide transport and mobile hydraulic solutions to customers seeking reliability combined with advanced performance. For assistance see contact information below. ASRALIA David Brown Engineering & Hydraulics Pty Ltd nit 1A/167 Prospect Highway Seven Hills, NSW, 2147 el: Fax: sales@powauto.com.au DANMARK David Brown Hydraulics Danmark A/S Fuglebaekvej 3d DK-2770 Kastrup el: Fax: david-brown@david-brown.dk FINLAND David Brown Hydraulics OY Vanha talvitie 3C FI Helsinki el: Fax: sales@davidbrownhydraulics.fi CONAC INFORMAION DESCHLAND David Brown Hydraulics Deutschland GmbH c/o Benzler BA BV, Jackthavenweg 2 NL-5928 N Venlo he Netherlands el: Fax: davidbrown@t-online.de IALIA David Brown Hydraulics Italia S.r.l. Via del Costruttore, Vignola - MO el: Fax: dbhitalia@dbhsl.com NORWAY David Brown Benzlers AS Stromsveien 312 Postboks 73 Leirdal Oslo 1008 el: Fax: post@dbhsl.com SA Hydreco Inc Continental Blvd Ste Z Charlotte NC el: Fax: sales@hydreco.com K David Brown Hydraulic Systems Limited 32 Factory Road Poole Dorset BH16 5SL el: +44 (0) Fax: +44 (0) info@dbhsl.com WEBSIES David Brown Hydraulics: Hydreco: Powauto: SH-2009-ROW -V1

+ Shuttle block (Only for 1/4" BSP)*

+ Shuttle block (Only for 1/4 BSP)* HV SERIES HYDRAULIC ILO CONROLS 23 to 51 cm 3 /rev (1.4 to 3.1 cu.in/rev) 280 bar (4000 psi) peak pressure HYDRAULIC ILO CONROLS Series HV - INRODUCION HYDRAULIC ILO CONROL HV ilot Control Valves are part

More information

INTRODUCING A 50 Year Journey CONTACT EMEA DENMARK FINLAND GERMANY ITALY NORWAY RUSSIA SOUTH AFRICA AMERICAS USA

INTRODUCING A 50 Year Journey CONTACT EMEA DENMARK FINLAND GERMANY ITALY NORWAY RUSSIA SOUTH AFRICA AMERICAS USA TIPPER APPLICATIONS The manufacturing engineering office from the 1950 s The Tool Room from 1947 100 YEARS OF HYDRAULICS EXPERIENCE Hydreco Hydraulics is the designer, manufacturer and distributor of products

More information

OUTSTANDING PERFORMANCE

OUTSTANDING PERFORMANCE ENGINEERED TO MOVE OUTSTANDING PERFORMANCE ON A GLOBAL SCALE We can demonstrate a proven ability to meet the needs of our customers and to support world leaders in their individual fields. It s not just

More information

ADVANCED HYDRAULIC TECHNOLOGIES ENGINEERED TO MOVE

ADVANCED HYDRAULIC TECHNOLOGIES ENGINEERED TO MOVE ENGINEERED TO MOVE 1860 ESTABLISHED 1913 HAMWORTHY ENGINEERING ESTABLISHED ADVANCED HYDRAULIC TECHNOLOGIES Outstanding Performance on a Global Scale 1928 EG BISHOP ESTABLISHED 1959 POWAUTO FORMED 1993

More information

Engineered around you. Roloid Gear Pump. Gear Pumps CRP1.01GBD1209

Engineered around you.   Roloid Gear Pump. Gear Pumps CRP1.01GBD1209 Engineered around you www.davidbrown.com Roloid Gear Pump Gear Pumps CRP1.01GBD1209 ROLOID PRODUCTS IN THE RANGE Serving an entire spectrum of mechanical drive applications from food, energy, mining and

More information

David Brown Sadiguard Torque Limiting Couplings Simply the best positive protection against overloads and jamming David Brown Sadiguard torque limiter

David Brown Sadiguard Torque Limiting Couplings Simply the best positive protection against overloads and jamming David Brown Sadiguard torque limiter David Brown Sadiguard Torque Limiting Couplings Simply the best positive protection against overloads and jamming David Brown Sadiguard torque limiters positive action eliminates the inaccuracies of shearing

More information

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) CAT.E.03/09.

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) CAT.E.03/09. 1 CAT.E.03/09.NA 0206 Now you can get design flexibility and lasting performance from our complete family of Precision Products. Series W Precision Servo Gearhead. Output torque up to 8,500 lb.in. Motor

More information

Electric Proportional Pressure Reducing Valves Series ERP 03.ERP

Electric Proportional Pressure Reducing Valves Series ERP 03.ERP Electric roportional ressure Reducing Valves Series ER 03.ER - 0912 Electric proportional pressure reducing valves SERIES ER Index of content: Description and main features: age 3 echnical data: age 4

More information

A-L O C COOLING SYSTEM OLAER COOLERS. Olaer A-LOC with integrated circulation pump for industrial hydraulic systems

A-L O C COOLING SYSTEM OLAER COOLERS. Olaer A-LOC with integrated circulation pump for industrial hydraulic systems OLAER A-L O C COOLERS COOLING SYSTEM Olaer A-LOC with integrated circulation pump for Olaer A-LOC with integrated circulation pump for industrial hydraulic systems R OLAER A-LOC FOR OPTIMUM EFFICIENCY

More information

EHP2 Carbon steel piston accumulator

EHP2 Carbon steel piston accumulator The Professional Choice in Fluid Management EHP2 Carbon steel piston accumulator 2 OILTECH EHP2 CARBON STEEL PISTON ACCUMULATOR Oiltech, a member of the Olaer Group, and a global player specialising in

More information

A-L A C AIR OIL COOLER LUFT/ÖL-KÜHLER OLAER COOLERS. Olaer A-LAC with A.C. motors for industrial hydraulic systems

A-L A C AIR OIL COOLER LUFT/ÖL-KÜHLER OLAER COOLERS. Olaer A-LAC with A.C. motors for industrial hydraulic systems OLAER A-L A C COOLERS AIR OIL COOLER Olaer A-LAC with A.C. motors for industrial hydraulic systems Olaer A-LAC with A.C. motors for industrial hydraulic systems LUFT/ÖL-KÜHLER Oiltech LAC mit Wechselstrommotor

More information

2/2-Way Pressure Relief Valve CX DBV (Right-Angle Design)

2/2-Way Pressure Relief Valve CX DBV (Right-Angle Design) 2/2-Way Pressure Relief Valve CX DBV (Right-Angle Design) CX DBV-E Model code (also example order) CX DBV 12 120 G1 F P 24V Type CX DBV = Pressure relief valve Nominal size 10 = DN 10 12 = 15 = 20 = CX

More information

EHP2 Stainless steel piston accumulator

EHP2 Stainless steel piston accumulator The Professional Choice in Fluid Management EHP2 Stainless steel piston accumulator 2 OILTECH EHP2 STAINLESS STEEL PISTON ACCUMULATOR Oiltech, a member of the Olaer Group, and a global player specialising

More information

Ports. Dr. Breit GmbH Carl-Zeiss-Straße 25 D Heiligenhaus phone-contact:

Ports. Dr. Breit GmbH Carl-Zeiss-Straße 25 D Heiligenhaus phone-contact: Solenoid operated EEx d IIC T6 Description of the Valve Directional control valves direct the flow in various directions (P A with 2/2 valves and P A // A T) with 3/2 valves. Available as 2/2 and 3/2 valves,

More information

Series BD - Screw Jacks Installation & Maintenance

Series BD - Screw Jacks Installation & Maintenance Series BD - Screw Jacks Installation & Maintenance IMC-1.00GB01/11 PRODUCT SAFETY Product Safety Information IMPORTANT General - The following information is important in ensuring safety. It must be brought

More information

AccuDrive Family of Products. Series W Series P Model RG Series E

AccuDrive Family of Products. Series W Series P Model RG Series E S.0109.01 Series S AccuDrive AccuDrive Family of Products Series W Series P Model RG Series E ACCUDRIVE PRECISION PRODUCTS Now you can get design flexibility and lasting performance from our complete family

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SPECIFICAIONS D05 Pattern Directional Control Valves Also refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONAC INFORMAION USA Headquarters Dynex/Rivett

More information

6-way Changeover valves 6VA VG VM VR VS way Changeover valves 8VR... 20

6-way Changeover valves 6VA VG VM VR VS way Changeover valves 8VR... 20 Changeover valve Coding Changeover system valve Changeover valves are used in front and telescopic loaders, forklift trucks, etc. to provide additional functions on the machinery. An example may be a

More information

PUMP SIZE Flow rate at 1500 rpm lt/min Operating pressures bar

PUMP SIZE Flow rate at 1500 rpm lt/min Operating pressures bar /7 ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications

More information

W Series W. AccuDrive. AccuDrive Family of Products. Series S Series P Model RG Series E

W Series W. AccuDrive. AccuDrive Family of Products. Series S Series P Model RG Series E W.0907.13 Series W AccuDrive AccuDrive Family of Products Series S Series P Model RG Series E ACCUDRIVE PRECISION PRODUCTS Now you can get design flexibility and lasting performance from our complete family

More information

xxx displacement pumps TXV for trucks

xxx displacement pumps TXV for trucks Variable xxx xxx displacement pumps TXV for trucks 1 sommaire why use a variable displacement pump?... 3 your hydraulic equipment.................. 4 load-sensing.... 5 variable displacement... 6 TXV 40

More information

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 426-5480 www.cmafh.com AccuDrive Series W Servo Gearhead THREE LEVELS OF PRECISION Zero Backlash - absolute

More information

Phased Out Products. Proportional Valve Group PVG 83. Tech Note MAKING MODERN LIVING POSSIBLE

Phased Out Products. Proportional Valve Group PVG 83. Tech Note MAKING MODERN LIVING POSSIBLE MAKING MODERN LIVING POSSIBLE Tech Note Proportional Valve Group PVG 83 Valve system PVG 83 is a hydraulic load sensing valve designed to give the customer just the valve he needs. From a simple load sensing

More information

AccuDrive. Series P CAT.P.01/05.NA. AccuDrive Series P

AccuDrive. Series P CAT.P.01/05.NA. AccuDrive Series P AccuDrive CAT.P.01/05.NA Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 426-5480 www.cmafh.com Series P Courtesy of CMA/Flodyne/Hydradyne Motion Control

More information

Q SERIES HYDRAULIC GEAR PUMPS. 16 to 240 cm 3 /rev (1 to 14.6 cu.in/rev) 280 bar (4000 psi) peak pressure

Q SERIES HYDRAULIC GEAR PUMPS. 16 to 240 cm 3 /rev (1 to 14.6 cu.in/rev) 280 bar (4000 psi) peak pressure Q SERIES HYRULI GER PUMPS 6 to 4 cm 3 /rev ( to 4.6 cu.in/rev) 8 bar (4 psi) peak pressure VI ROWN HYRULIS With its headquarters in the U, other avid rown Hydraulics companies located in Europe & ustralia,

More information

Fixed Displacement Plug-In Motor A2FE

Fixed Displacement Plug-In Motor A2FE Industrial Hydraulics Electric Drives and Controls Linear Motion and ssembly echnologies Pneumatics Service utomation Mobile Hydraulics Fixed Displacement Plug-In Motor 2FE RE 9008/03.97 replaces 04.96

More information

TPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 852 / 0815 / E

TPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 852 / 0815 / E HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415

More information

Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps

Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps MD series Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps Main material Magnetic drive seal-less pumps are free from leakage problems and the need for seal replacement.

More information

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) MODEL RG RG

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) MODEL RG RG RG. 0906.16 1 0107 HOLLOW SHAFT STANDARD Compact mounting saves space No coupling required saves costs Solid shaft also available for maximum flexibility EASY MOTOR MOUNTING Integrated zero backlash coupling

More information

HYDAC DC Compact Power Units DC1

HYDAC DC Compact Power Units DC1 HYDAC DC Compact Power Units DC1 up to 250 bar up to 18.4 l/min In accordance with EN 60034-1 suitable for short-term operation 981 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL Very low noise level due to special

More information

Series BS (Compact Worm Gear) CBS-1.00GBD0108. Technical Up to - 4 kw / 315 Nm WORM GEARBOX.

Series BS (Compact Worm Gear) CBS-1.00GBD0108. Technical Up to - 4 kw / 315 Nm WORM GEARBOX. CBS-1.00GBD0108 Series BS (Compact Worm Gear) Technical Up to - 4 kw / 315 Nm WORM GEARBOX www.davidbrown.com SERIES BS PRODUCTS IN THE RANGE Serving an entire spectrum of mechanical drive applications

More information

Modular Hydro-Pneumatic Suspension System Improving Suspension Performance with a Proper Setup: Quicker and Better Adaptation to Applications

Modular Hydro-Pneumatic Suspension System Improving Suspension Performance with a Proper Setup: Quicker and Better Adaptation to Applications MHS Modular Hydro-neumatic Suspension System Improving Suspension erformance with a roper Setup: Quicker and etter Adaptation to Applications echnical Features p max up to 20 bar (3600 SI) Reduces vibrations

More information

Monoblock directional control valves DL - Directional control valve

Monoblock directional control valves DL - Directional control valve Monoblock directional control valves DL - Directional control valve DL Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD008I00-06-2-208 DL echnical data Nominal

More information

S.A. 193 Stefan Cel Mare str., 2400 Sibiu -Romania

S.A. 193 Stefan Cel Mare str., 2400 Sibiu -Romania S.A. H rd 193 Stefan Cel Mare str., 2400 Sibiu -Romania 1 240 l/min 315 bar Pressure control valves NG10,20,32 FC -9 GENERALITIES Pilot operated pressure control valves, available with/without by-pass

More information

Series PD directly operated solenoid valves

Series PD directly operated solenoid valves > Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current

More information

2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50

2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50 2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be

More information

Magnetic drive pumps. A worldwide best-seller, our high-quality compact magnetic drive pumps GFRPP. Magnetic drive pumps. series.

Magnetic drive pumps. A worldwide best-seller, our high-quality compact magnetic drive pumps GFRPP. Magnetic drive pumps. series. MD series Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps Magnetic drive pumps Main material Magnetic drive seal-less pumps are free from leakage problems and

More information

STAUFF STAUFF. Local solutions for individual customers worldwide. Medium Pressure Filters SMPF FILTRATION TECHNOLOGY

STAUFF STAUFF. Local solutions for individual customers worldwide. Medium Pressure Filters SMPF FILTRATION TECHNOLOGY STAUFF THIS IS STAUFF RESPONSE AND FLEXIBILITY COMPETENT SERVICE PROMPT DELIVERY ENSURED QUALITY FRIENDLY SERVICE PROVEN IN PRACTICE Australia Stauff Corporation (Pty.) Ltd. P.O.Box 227, 24-26 Doyle Avenue,

More information

Isolator Sandwich Plate

Isolator Sandwich Plate Isolator Sandwich late CEO Model code (also order example) KH4K DN10 CEO 5302 09 X Symbol DN 06 Designation KH4K = 4-gallery isolator ball valve KH6K = 6-gallery isolator ball valve Nominal bore DN06 DN10

More information

Main material GFRPP IWAKI MAGNETIC DRIVE PUMPS

Main material GFRPP IWAKI MAGNETIC DRIVE PUMPS Main material IWAKI MAGNETIC DRIVE PUMPS A worldwide best-seller, our high-quality compact magnetic drive pumps Our series leak-free compact magnetic pumps are a worldwide best-seller and are used in medical

More information

Safety valves direct, pilot operated and cartridge execution

Safety valves direct, pilot operated and cartridge execution www.atos.com Table E-3/E Safety valves direct, pilot operated and cartridge execution with inductive position or proximity switches conforming to Machine Directive 6/4/CE DHI-6*/FI LIDA-343*/FV LIFI-34*/NC

More information

ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO

ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min

More information

Functional Description

Functional Description Under Oil ower ack SA 01 p max 250 bar Q max 17 l/min HA 7111 07/2014 Replaces HA 7111 12/2009 Small compact power packs used in lifting platforms, ramps and other applications 3 basic hydraulic circuits

More information

RA / Accumulator unloading valve, pilot operated, Model DA 6 V.., series 4X. Ordering details DA 6 V 4X. Preferred models 1/8.

RA / Accumulator unloading valve, pilot operated, Model DA 6 V.., series 4X. Ordering details DA 6 V 4X. Preferred models 1/8. R 26 404/06.9 ccumulator unloading valve, pilot operated, Model D 6 V.., series 4X Size 6 up to 4500 SI (315 bar) up to.00 GM (30 L/min) R 26 404/04.9 Features: For subplate mounting: porting pattern to

More information

TPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E

TPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HY-TRANS THE PRODUCTION LINE OF HANSA-TMP Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415

More information

External Drive Axis Packages

External Drive Axis Packages External Drive Axis Packages for MOTOMAN Robots with DX0 Controller www.yaskawa.eu.com External Drive Axis Packages As a leading developer and manufacturer of servomotors and controllers, YASKAWA is able

More information

BW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511

BW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511 ywire Elements Flow Sharing Element Interface IW05 efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES Technical data Nominal flow Nominal pressure 35 l/min - P=8 bar

More information

Internal Gear Unit. for motor/pump service Series QXM. Reference: 100-P EN-07 1/16. Issue:

Internal Gear Unit. for motor/pump service Series QXM. Reference: 100-P EN-07 1/16. Issue: Internal Gear Unit for motor/pump service Series QXM Reference: -P-63-EN-7 Issue: 8.215 1/16 Contents Page 1 General... 3 1.1 Product description... 3 1.2 Advantages... 3 1.3 Application... 3 1.4 ATEX

More information

COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES

COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES SD4 Features Simple, compact designed, this valves is only one section for open center and closed center hydraulic systems. H Fittedwithamainpressurereliefvalve.

More information

55F Fork Positioner ARTS MANUAL. cascade Cascade is a Registered Trademark of Cascade Corporation. Manual Number R-0

55F Fork Positioner ARTS MANUAL. cascade Cascade is a Registered Trademark of Cascade Corporation. Manual Number R-0 P ARTS MANUAL Fork Positioner Product I. D. Numbers -HB-002 through 55E-HB-006 -HS-001 through -HS-021 Special Engineered Options Not Included Manual Number 207501 R-0 Cascade is a Registered Trademark

More information

Variable Displacement Plug-In Motor A6VE

Variable Displacement Plug-In Motor A6VE Electric Drives and Controls Hydraulics Linear Motion and Assembly echnologies Pneumatics Service Variable Displacement Plug-In Motor A6VE RE 91 606/06.05 1/16 Replaces: 05.99 echnical data sheet Series

More information

Series PD directly operated solenoid valves

Series PD directly operated solenoid valves > Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate

More information

Ordering details MRV 02 P K Nominal size. 02:NG6 Cetop3 03:NG10 Cetop5 04:NG16 Cetop7 06:NG22 Cetop8. Modular relief valve MRV-B MRV-02C.

Ordering details MRV 02 P K Nominal size. 02:NG6 Cetop3 03:NG10 Cetop5 04:NG16 Cetop7 06:NG22 Cetop8. Modular relief valve MRV-B MRV-02C. MRV series modular relief valves echnical specification Model Max.flow rate (l/min) Working pressure (Ma) Weight(kgs) Symbol list MRV- MRV-02 MRV series modular relief valves can control flow for positive

More information

Rollator SPARE PARTS CATALOGUE. Gemino

Rollator SPARE PARTS CATALOGUE. Gemino Rollator SPARE PARTS CATALOGUE EN 01 Contents 01 Contents Page 2 02.1 Cross brace and lifting handle Page 3 02.2 Cross brace, service kit Page 4 03 Push handles Page 5 03.1 Underarm support Page 7 04.1

More information

HYDRAULIQUE PNEUMATIQUE TOUS COMPOSANTS VENTE - REPARATION DEPANNAGE

HYDRAULIQUE PNEUMATIQUE TOUS COMPOSANTS VENTE - REPARATION DEPANNAGE HYDRAULIQUE PNEUMATIQUE TOUS COMPOSANTS VENTE - REPARATION DEPANNAGE HYPSO RN 113 BP 10 82700 MONTECH Tél. : 05 63 64 70 71 Fax : 05 63 64 76 56 Web : http://www.hypso.fr Mail : contact@hypso.fr COMPACT

More information

Solenoid directional valves type DPHI, DPHU

Solenoid directional valves type DPHI, DPHU www.atos.com Table E0805/E Solenoid directional valves type, two stage, ISO 4401 size 10, 16, 25 and 32 37**/HM..... and are spool type, two or three position directional two stage solenoid valves designed

More information

MOTOMAN GP-series. Handling & General Application. Controlled by YRC

MOTOMAN GP-series. Handling & General Application. Controlled by YRC MOTOMAN GP-series Handling & General Application Controlled by YRC1000 www.yaskawa.eu.com MOTOMAN GP-series Robot System Solutions MOTOMAN GP-series Find smart solutions for production site issues with

More information

4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve

4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve 4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve RE 183-54/7.12 Replaces: 1.9 1/8 8_58 (EDZ-VEI) Size 4 Series

More information

STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS

STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions

More information

Fixed Displacement Motor A2FM

Fixed Displacement Motor A2FM rueninghaus Hydromatik Series 6, for use in open and closed circuits xial tapered piston - bent axis design Sizes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91001/01.97 RE 91001/01.97

More information

STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS

STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions and services.

More information

DL /116 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SERIES 10 SUBPLATE MOUNTING ISO p max 320 bar Q max 125 l/min

DL /116 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SERIES 10 SUBPLATE MOUNTING ISO p max 320 bar Q max 125 l/min 41 330/116 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO 4401-05 p max 320 bar Q max 125 l/min MOUNTING INTERFACE OPERATING PRINCIPLE ISO 4401-05-04-0-05 (CETOP 4.2-4-05-320)

More information

HYDAC (Three-Phase Current) Compact Power Units CO1

HYDAC (Three-Phase Current) Compact Power Units CO1 HYDAC (Three-Phase Current) Compact Power Units CO1 Up to 250 bar Up to 20 l/min In accordance with EN 60034-1 suitable for: Short-term operation: S2 = 5 min* (average value) Intermittent operation: S3

More information

Commercial Shearing (Pty) Ltd THE WORLDWIDE PROGRAM OF VALVES ISO 9001

Commercial Shearing (Pty) Ltd THE WORLDWIDE PROGRAM OF VALVES ISO 9001 Commercial Shearing (Pty) Ltd THE WORLDWIDE PROGRAM OF VALVES ISO 9001 An Insight into Valve Technology CLEAN ROOM ASSEMBLY AND TEST A major investment has been made in a clean-room assembly and test environment.

More information

Breakers. Make an Impact.

Breakers. Make an Impact. Make an Impact. Breakers BREAKING TECHNOLOGY Bretec first made its mark in the hydraulic breaker OEM business back in 1994. Now after almost 20 years since Bretec s first impact, a Bretec branded breaker

More information

HYDRAULIC MOTOR-BRAKE B/MR

HYDRAULIC MOTOR-BRAKE B/MR HYDRAULI APPLIAION onveyors Feeding mechanism of robots and manipulators Metal working machines extile machines Agriculture machines Food industries Mining machinery etc. ONENS Specification data... 22

More information

MMT MMT 25, 27, 32, 35, 42 MMT 30W, 42W, 52W

MMT MMT 25, 27, 32, 35, 42 MMT 30W, 42W, 52W Käyttöohje suomi Bruksanvisning svenska Bruksanvisning norsk Brugsanvisning dansk Operation instructions english Gebrauchsanweisung deutsch Gebruiksaanwijzing nederlands Manuel d utilisation français 1925030

More information

Pilot Operated Pressure Relief Valve Series R5V (Denison)

Pilot Operated Pressure Relief Valve Series R5V (Denison) Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps

More information

ISO 4401 size 07; 315 bar (4500 psi); up to 200 L/min (53 USgpm) General Description

ISO 4401 size 07; 315 bar (4500 psi); up to 200 L/min (53 USgpm) General Description Vickers SystemStak SystemStak Valves ISO 441 size 7; 315 bar (45 psi); up to 2 L/min (53 USgpm) General Description This range of stackable hydraulic controls are designed to be mounted under a size 7

More information

Solutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton Directional Control Valves. h y d r a u l i c s. Models and 31930

Solutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton Directional Control Valves. h y d r a u l i c s. Models and 31930 H y d r a u l i c s ydraulics Eaton Directional Control Valves h y d r a u l i c s Models 319 and 3193 with Pilot Operated Checks We Manufacture No. 11-5 March 1996 Solutions Directional Control Valves

More information

TPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 851 / 0813 / E

TPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 851 / 0813 / E HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES THE PRODUCTION LINE OF HANSA-TMP Variable Displacement Closed Loop System CONTENTS General Information... Order Code... Manual Control

More information

OPERATING MANUAL. Black Bruin hydraulic motors S-series model D

OPERATING MANUAL. Black Bruin hydraulic motors S-series model D S-series model D CONTENTS 1 GENERAL INSTRUCTIONS... 3 1.1 About the manual... 3 1.2 Revision comments... 3 1.3 Applicability... 3 1.4 Warranty... 3 1.5 Product identification... 3 2 INSTALLATION INSTRUCTIONS...

More information

UŽSISAKYK internetu - el. paštu - telefonu

UŽSISAKYK internetu -  el. paštu - telefonu HYDRAULIC UŽSISAKYK internetu - www.dominga.lt/eshop el. paštu - info@dominga.lt telefonu - +70 52 2221 APPLICATION»»»»» Conveyors Textile machines» Mining machinery Machine tools Ventilators Construction

More information

Series 20 Axial Piston Pumps. Technical Information

Series 20 Axial Piston Pumps. Technical Information Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss

More information

Pressure Relief Valve

Pressure Relief Valve ressure Relief Valve For mounting on hydraulic pumps and motors Series ASDF and AGDF S short response times S trouble-free operation S with improved pressure-adjustment resolution S high levels of functionality

More information

Series 20 Axial Piston Pumps. Technical Information

Series 20 Axial Piston Pumps. Technical Information Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss

More information

Oil Seal Catalogue. Ashley Power Ltd Ashley Road Parkstone Poole Dorset, BH14 0AQ. P1

Oil Seal Catalogue. Ashley Power Ltd Ashley Road Parkstone Poole Dorset, BH14 0AQ.  P1 Ashley Power Ltd. 580-586 Ashley Road Parkstone Poole Dorset, BH14 0AQ Oil Seal Catalogue Tel: +44 (0) 1202 746031 Fax: +44 (0) 1202 741108 Email: sales@ashleypower.co.uk P1 Oil Seals P2 Oil Seals Contents

More information

Valid for you. medium voltage switchgear

Valid for you. medium voltage switchgear Valid for you. medium voltage switchgear VEO knows your needs VEO s field of expertise is energy. We provide customised automation and electrification solutions for customers in the power generation, distribution

More information

Meter-in pressure compensator, direct operated

Meter-in pressure compensator, direct operated Meter-in pressure compensator, direct operated RE 94/.07 Replaces: 0.0 / ype ZDC Sizes 0 to Component series Maximum operating pressure bar Maximum flow l/min tb07 able of contents Content age Features

More information

Series J Shaft Mounted Gearbox

Series J Shaft Mounted Gearbox www.radicon.com Series J Shaft Mounted Gearbox Technical Up to - 600kW /57,000 Nm Industrial Gearbox CJ-1.00GBD0111 PRODUCTS IN THE RANGE Serving an entire spectrum of mechanical drive applications from

More information

Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump.

Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump. MDW series Magnetic drive pumps Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump. The MDW series are the largest class fluoroplastic

More information

Available manual, pneumatic, and hydraulic spool control kits.

Available manual, pneumatic, and hydraulic spool control kits. Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,

More information

Pressure limitation and feed valve, pilot-operated Type MHDBN...Y

Pressure limitation and feed valve, pilot-operated Type MHDBN...Y Pressure limitation and feed valve, pilot-operated Type MHDBN...Y RE 64600 Edition: 06.2018 Sizes 22, 32 Series 3X Maximum working pressure 420 bar Maximum flow 400 l/min H8121 Features Screw-in cartridge

More information

B8_58 (EDBZ-VEI) RE Edition: Replaces:

B8_58 (EDBZ-VEI) RE Edition: Replaces: 4/3 Directional valve elements 8_58 with or without EDZ-VEI) secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve 8_58 EDZ-VEI) RE 183-54 Edition: 2.216 Replaces:

More information

GEAR PUMPS DIMENSIONAL DETAILS

GEAR PUMPS DIMENSIONAL DETAILS DIMENSIONAL DETAILS OUTLET INLET TYPE DISPLACEMENT CM 3 /REV FLOW AT 1500 REV/MIN MAX. WORKING PRESSURE MAX. SPEED DIMENSIONS MM P1 P2 P3 RPM L M D2 1.4 2.0 270 290 310 6000 40 79 D3 2.1 2.9 270 290 310

More information

Proportional pressure reducing valve of 3-way design Types 3DREP and 3DREPE

Proportional pressure reducing valve of 3-way design Types 3DREP and 3DREPE RE 29 184/12.02 Replaces: 12.98 roportional pressure reducing valve of 3-way design ypes 3DRE and 3DREE Nominal size 6 Series 2X Maximum operating pressure 100 bar Maximum flow 15 L/min H//D 5735/97 ype

More information

Directional valves Electrically operated CL03 series-ev. Brochure

Directional valves Electrically operated CL03 series-ev. Brochure CL03 series-ev Brochure 2 Rexroth Pneumatics CL03 series-ev Qn = 700 l/min valve width: 16 mm NO/NC plate connection compressed air connection output: Ø 8 - G 1/8 Manual override: detent 3 Qn = 700 l/min

More information

2/2 CARTRIDGE VALVES LOGIC ELEMENTS

2/2 CARTRIDGE VALVES LOGIC ELEMENTS 2/2 LOGIC ELEMENTS AND COVERS KEL.16/2... CH. V PAGE 3 NG16 / NG2 KEL SEATS CH. V PAGE 4 KEC.16/2... CH. V PAGE KEC HYDRAULIC MOUNTING DIAGR. CH. V PAGE 6 KEC.16/2... WITH CMP CH. V PAGE 10 C.*.P.16/2...

More information

Control module. Table of contents. RE 51156/05.13 Replaces: Type IH15B

Control module. Table of contents. RE 51156/05.13 Replaces: Type IH15B Control module RE 51156/05.13 Replaces: 09.11 1/96 ype IH15 Component series 1 Maximum operating pressure 350 bar Maximum flow 30 l/min H//D 7228 able of contents Contents age Features 2 Description, general

More information

Product Tips and Features

Product Tips and Features 5.00.01 anifolds & Valve Packs Product Tips and Features Circuits Relief from P to T are designed to provide a means to connect a single solenoid valve to field piping either on the power unit or near

More information

Directional Control Valve CV550

Directional Control Valve CV550 www.nimco-controls.com Directional Control Valve CV550 Smart Solutions... for the Future Contents Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 16 Page 17 Page 18 Page

More information

Sectional Directional Control Valve RSQ 240

Sectional Directional Control Valve RSQ 240 Sectional Directional Control Valve RSQ 0 Key valve features RSQ 0 is a sectional open center valve, designed for max. operating pressures up to 50 bar and max. pump flows up to 00 l/min. It is available

More information

Fixed Displacement Pump A2FO

Fixed Displacement Pump A2FO RE 91401/01.97 Brueninghaus Hydromatik eries 6, for open circuits Axial tapered piston - bent axis design izes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91401/01.97 replaces 11.95

More information

1500 Series. Roller Bearing Gear Pumps and Motors (Bi-Rotational) High Performance Features: Hydreco

1500 Series. Roller Bearing Gear Pumps and Motors (Bi-Rotational) High Performance Features: Hydreco Roller Bearing Gear Pumps and Motors (Bi-Rotational) High Performance Features: The 1500K Series Pump/Motor utilizes the many design and application features of the widely accepted HYDRECO Series modern

More information

2/2 way Directional Control Valves, type VDH For inline mounting and Cetop 3 flange mounting (ISO 4401)

2/2 way Directional Control Valves, type VDH For inline mounting and Cetop 3 flange mounting (ISO 4401) Data sheet 2/2 way Directional Control Valves, type VDH For inline mounting and Cetop 3 flange mounting (ISO 4401) Inline versions: VDH 30 E 2/2, VDH 60 E 2/2, VDH 120 E 2/2 Cetop 3 block version: VDH

More information

Components and Systems for the Automotive Industry

Components and Systems for the Automotive Industry Components and Systems for the Automotive Industry E 10.136.0/03.12 HYDAC Germany HYDAC USA HYDAC China HYDAC Korea The Professional Partner for the Automotive Industry With over 6,000 staff worldwide,

More information

Ultima SLM Ni-Cd battery Performance with ultra low maintenance

Ultima SLM Ni-Cd battery Performance with ultra low maintenance Ultima SLM Ni-Cd battery Performance with ultra low maintenance July 2004 2 Ultima Ni-Cd battery Ultra low maintenance Developed in line with long proven nickel-cadmium technology, Ultima is an exceptionally

More information

RV1P /118 ED VARIABLE DISPLACEMENT VANE PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL

RV1P /118 ED VARIABLE DISPLACEMENT VANE PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL 14 201/118 ED RV1P VARIABLE DISPLACEMENT VANE PUMPS OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS (measured with mineral oil with viscosity of 46 cst at 40 C) RV1P are variable displacement vane pumps with

More information

Mobile Filtration Systems SMFS-P and SMFS-U

Mobile Filtration Systems SMFS-P and SMFS-U SMFS-P-015 SMFS-U-030 SMFS-U-DL-015-G SMFS-U-060 SMFS-U-110 SMFS-U-CM-110 Mobile Filtration Systems SMFS-P and SMFS-U Introduction 2 Introduction STAUFF Filtration Technology offers a complete range of

More information

Pressure relief and feed valve, pilot operated. Type MHDBN. Features. Contents. RE Edition: Replaces:

Pressure relief and feed valve, pilot operated. Type MHDBN. Features. Contents. RE Edition: Replaces: Pressure relief and feed valve, pilot operated Type MHDBN RE 646 Edition: 13- Replaces: 11-9 Frame sizes 16,, 3 Component series 3X Maximum operating pressure 4 bar Maximum flow 4 l/min H7567 Features

More information