Tabelle A-a Standardmineralöle für FLENDER Stirnrad-, Kegelrad-, Planetengetriebe und 'Marinegetriebe ohne Lamellenkupplung' sowie Getriebemotoren
|
|
|
- Ethelbert Thomas
- 6 years ago
- Views:
Transcription
1 Approved lubricants --- Freigegebene Schmierstoffe T 7300 Table A-a Standard mineral oils for FLENDER helical, bevel-helical, planetary gear boxes and 'Marine gear Tabelle A-a Standardmineralöle für FLENDER Stirnrad-, Kegelrad-, Planetengetriebe und 'Marinegetriebe ohne Lamellenkupplung' sowie Getriebemotoren revision: 22 July 2014 Revision: 22. Juli 2014 A - a 1 (5)
2 Gear Oil 150 F Gear Oil 220 F Gear Oil 320 F Gear Oil 460 F Gear Oil 680 F Addinol ECO GEAR 150 M ECO GEAR 220 M ECO GEAR 320 M ECO GEAR 460 M ECO GEAR 680 M Bantleon Avilub Gear RSX-F 150 Avilub Gear RSX-F 220 Avilub Gear RSX-F 320 Avilub Gear RSX-F 460 Avilub Gear RSX-F 680 BP Energol GR-XP 150 Energol GR-XP 220 Energol GR-XP 320 Energol GR-XP 460 Energol GR-XP 680 Castrol classic Alpha SP 150 Alpha SP 220 Alpha SP 320 Alpha SP 460 Alpha SP 680 Castrol performance CEPSA Optigear BM 150 Optigear BM 220 Optigear BM 320 Optigear BM 460 ENGRANAJES XMP 150 ENGRANAJES XMP 220 AEROGEAR 320 ENGRANAJES XMP 460 ENGRANAJES XMP 320 Chevron Meropa XL 150 Meropa XL 220 Meropa XL 320 Meropa XL 460 Cogelsa ULTRAGEAR EP 150 ULTRAGEAR EP 220 ULTRAGEAR EP 320 ULTRAGEAR EP 460 ULTRAGEAR EP 680 Engen Petroleum Ltd. Gengear XEP 150 Gengear XEP 220 Gengear XEP 320 Gengear XEP 460 Gengear XEP 680 A - a 2 (5)
3 RENOLIN CLP 150 RENOLIN CLP 220 RENOLIN CLP 320 RENOLIN CLP 460 RENOLIN CLP 680 Fuchs RENOLIN CLP Plus 150 RENOLIN CLP Plus 220 RENOLIN CLP Plus 320 RENOLIN CLP Plus 460 RENOLIN CLP Plus 680 Fuchs Lubritech GEARMASTER CLP 150 GEARMASTER CLP 220 GEARMASTER CLP 320 GEARMASTER CLP 460 GEARMASTER CLP 680 Reductor F 150 Reductor F 220 Reductor F 320 Reductor F 460 Gulf Oil International Gulf Gear WT 220 Gulf Gear WT 320 Gulf Gear WT 460 Indian Oil Klüber LLC LLK International Servomesh Gold 150 Servomesh Gold 220 Servomesh Gold 320 Servomesh Gold 460 Klüberoil GEM N Klüberoil GEM N Klüberoil GEM N Klüberoil GEM N Klüberoil GEM N Klüberoil GEM N LUKOIL STEELO 150 LUKOIL STEELO 220 LUKOIL STEELO 320 LUKOIL STEELO 460 LOTOS OIL XSP 150 XSP 220 XSP 320 XSP 460 XSP 680 XSP 1000 Mobil Mobilgear 600 XP 100 Mobilgear 600 XP 150 Mobilgear 600 XP 220 Mobilgear 600 XP 320 Mobilgear 600 XP 460 Mobilgear 600 XP 680 A - a 3 (5)
4 MOL-LUB Ltd. MOL Ultrans EP 150 MOL Ultrans EP 220 MOL Ultrans EP 320 MOL Ultrans EP 460 MOTOREX OMV Petrol Ofisi Gravis MP 150 Gravis MP 220 Gravis MP 320 Gravis MP 460 Gravis MP 680 OMV R & M OMV gear HAST 150 OMV gear HAST 220 OMV gear HAST 320 OMV gear HAST 460 OMV gear HAST 680 OMV gear HAST 1000 Pertamina MASRI SUPER FLG 150 MASRI SUPER FLG 220 MASRI SUPER FLG 320 MASRI SUPER FLG 460 PETROGAL A - a 4 (5)
5 Q8-Kuweit Petroleum Q8 Goya NT 150 Q8 Goya NT 220 Q8 Goya NT 320 Q8 Goya NT 460 Setral TOTAL MI-setral-GEAR 150 MI-setral-GEAR 220 MI-setral-GEAR 320 MI-setral-GEAR 460 MI-setral-GEAR 680 CARTER EP 220 CARTER EP 320 CARTER EP 460 CARTER EP 680 CARTER XEP 150 CARTER EP 1000 CARTER XEP 220 CARTER XEP 320 CARTER XEP 460 CARTER XEP 680 Verkol COMPOUND MP 150 COMPOUND MP 220 COMPOUND MP 320 COMPOUND MP 460 COMPOUND MP 680 A - a 5 (5)
Table A-c Standard PAO oils for FLENDER helical, bevel-helical, planetary gear boxes and 'Marine gear units without multi-disk clutches'
Approved lubricants --- Freigegebene Schmierstoffe Table A-c Standard PAO oils for FLENDER helical, bevel-helical, planetary gear boxes and 'Marine gear units Tabelle A-c Standard-PAO-Öle für FLENDER Stirnrad-,
Section 3.1. Machine Maintenance - Machine Maintenance Information. Important Preventive Maintenance Information: Maintenance Charts & Diagrams:
Section 3.1 Machine Maintenance - Maintenance Charts & Diagrams: Special Component Break-In Chart... 3.1.2 Preventive Maintenance Schedule Chart... 3.1.2 Lubrication Points Diagram... 3.1.3 Lubricant &
5 Lubrication, Cooling and Heating
Overview of the and cooling types Lubrication, and Heating.1 Overview of the and cooling types The following combinations of and cooling types are possible. Lubrication Splash with shaft end pump /SEP
Catalogue geared motors. Edition 01/
Catalogue geared motors Edition 0/0 Page Gearboxes and Lubrication Standard fitting - BG and BF - BK and BS Position of the terminal box and the cabel entry - BG and BF - BK and BS Radial and axial forces
5 Gear units, types of installation, lubricant quantities. 5.1 Standard fitting positions/ types of installation for Bauer geared motors
26 5 Gear units, types of installation, lubricant quantities 5.1 Standard fitting positions/ types of installation for Bauer geared motors 5 27 28 5.2 Position of the terminal box and the cable entry points
5 Lubricants. Lubricants Guidelines for lubricant selection. 5.1 Guidelines for lubricant selection STOP
Guidelines for lubricant selection Lubricants. Guidelines for lubricant selection Unless a special arrangement is made, SEW-EURODRIVE delivers the planetary gear unit without an oil fill and the primary
5 Lubrication, Cooling, and Heating
Lubrication,, and Heating Overview of the and cooling types Lubrication,, and Heating.1 Overview of the and cooling types The following combinations of and cooling types are possible. Lubrication Splash
Installation and Maintenance Helical and Bevel Helical Gearboxes KUMERA POWER TRANSMISSION GROUP
Installation and Maintenance Helical and Bevel Helical Gearboxes KUMERA POWER TRANSMISSION GROUP KUMERA DRIVES OY Kumerankatu 2 FI-11100 Riihimäki FINLAND Tel. +358 20 755 4200 Fax +358 20 755 4220 E-mail
RFP # 6632 EXHIBIT 3 Technical Specifications Supply of Wärtsilä Gas Engine Lubrication Oil and Cooling System Glycol
RFP # 6632 EXHIBIT 3 Technical Specifications Supply of Wärtsilä Gas Engine Lubrication Oil and Cooling System Glycol A. PURPOSE The City of Denton is providing information that will allow prospective
Section 3.1. Machine Maintenance - Machine Maintenance Information
Section 3.1 Machine Maintenance - Maintenance Charts & Diagrams: Special Component Break-In Chart... 3.1.2 Preventive Maintenance Schedule Chart... 3.1.2 Lubricant & Fill Capacities Chart... 3.1.4 Engine
DIWA List of Approved Oils Oil Change Interval 120,000 km
List of Approved Oils Oil Change Interval 120,000 km 2017-08-23 H55.633646en, Protection class 0: open This list of approved oils is not applicable to North America VTI-DIWA-Service Bulletins 013 and 118
LUBRICATION OIL LIST FOR SIMPLEX STERN TUBE BUSHES, INTERMEDIATE SHAFT BEARINGS AND SEALS
LUBRICATION OIL LIST FOR SIMPLEX STERN TUBE BUSHES, INTERMEDIATE SHAFT BEARINGS AND SEALS The SIMPLEX seal is fitted with sealing rings of Perbunan or Viton depending on the operating conditions. The following
GEARED MOTOR UNITS R, S, F, K SERIES INSTALLATION & MAINTENANCE GUIDE
GEARED MOTOR UNITS R, S, F, K SERIES INSTALLATION & MAINTENANCE GUIDE INFORMATION Declaration of Conformity Products: R, S, F & K Series - Gear Units. Renold Gears hereby declares that products listed
Addendum to the Assembly and Operating Instructions
Drive Technology \ Drive Automation \ System Integration \ Services *2276652_1216* Addendum to the Assembly and Operating Instructions Industrial Gear Units X.. Series Helical and Bevel-Helical Gear Units
Operating Instructions
Operating Instructions Table of contents Table of contents... 1 1. Declaration... 1 2. Warranty and liability... 2 3. Gear description... 2 4. Gear types... 2 5. Safety... 3 5.1 General safety information...
Addendum to the Assembly and Operating Instructions
Drive Technology \ Drive Automation \ System Integration \ Services *235971_317* Addendum to the Assembly and Operating Instructions Industrial Gear Units X.. Series Helical and Bevel-Helical Gear Units
INDUSTRIAL REDUCER UNITS
INDUSTRIAL REDUCER UNITS H SERIES INSTALLATION & MAINTENANCE GUIDE CONTENTS PAGE Section Description Page No 1 Declaration of Conformity / Incorporation 1 1 General Information 2 2 Weather Protection 2
6 Design and Operating Notes
Lubricants and fill quantities GK 0 Design and Operating Notes. Lubricants and fill quantities General information Unless a special arrangement is made, SEW-EURODRIVE supplies the drives with a lubricant
8 Design and Operating Notes
Lubricants Design and Operating Notes.1 Lubricants General information Unless a special arrangement is made, SEW-EURODRIVE supplies the drives with a lubricant fill adapted for the specific gear unit and
Das Winkelgetriebe. Made in Germany. Service. bevel gearboxes. Miniature. gearboxes. Bevel. Hygiene-design. gearboxes. gearboxes.
Made in Germany Miniature bevel gearboxes Bevel gearboxes Das Winkelgetriebe Hygiene-design gearboxes Hypoid gearboxes Worm gearboxes Gearbox motors Servo gearboxes (precision gearboxes) Special gearboxes
6 Design and Operating Notes
Reduced backlash gear units GSE Design and Operating Notes.1 Reduced backlash gear units Helical, parallel shaft helical and helical-bevel gear units with reduced backlash are available from gear unit
314 ORDINARY MAINTENANCE MANUAL FOR. PGA series VERTICAL MOUNTING POSITION. Release A02/15
314 www.comerindustries.com ORDINARY MAINTENANCE MANUAL FOR PGA series VERTICAL MOUNTING POSITION Release A02/15 INDEX General information...page 3 Ordinary maintenance...page 4 Oil lubricant replacement...page
FLENDER ZAPEX couplings ZWTR. Operating instructions BA 3528 EN 09/2011. FLENDER couplings
FLENDER ZAPEX couplings ZWTR Operating instructions FLENDER couplings FLENDER ZAPEX couplings ZWTR Operating instructions Translation of the original operating instructions Technical data General notes
GEAR UNITS FOR INDUSTRIAL APPLICATIONS AND ROTATION
Installation and maintenance manual GEAR UNITS FOR INDUSTRIAL APPLICATIONS AND ROTATION 1 2 Table of contents 1. Introduction...4 1.1 Consulting the Manual... 4 1.2 Purpose of the Manual... 4 1.3 Warranty
Approved Lubricants ILU 1.00GBD0110. For further information call +44 (0) , or visit
www.davidbrown.com The Series G Industrial Gearbox from David Brown is renowned worldwide for providing real value for money. Businesses know that you can rely on the Series G perform consistently day
7 Design and Operating Notes
Lubricants Design and Operating Notes.1 Lubricants General information Unless a special arrangement is made, SEW-EURODRIVE supplies the drives with a lubricant fill adapted for the specific gear unit and
Series M. C. F. K - Geared Motors Installation & Maintenance
Series M. C. F. K - Geared Motors Installation & Maintenance IMC-1.00GB01/11 PRODUCT SAFETY Product Safety Information IMPORTANT General - The following information is important in ensuring safety. It
Approved Suppliers
EN Page 1/8 Change information: Chap. /page Description (changes to the previous edition) Modification no. Page 7 CLP HC 320 / Mobil SHC Gear 320 / highest oil bath temperature changed from 95 C to 100
6 Design and Operating Notes
Design and Operating Notes Lubricants Design and Operating Notes. Lubricants General information Unless a special arrangement is made, SEW-EURODRIVE supplies the drives with a lubricant fill adapted for
Technical Information
CYCLO 6 5 Technical Information Technical Information Technical Information 5.1 CYCLO 6 Lubrication Cyclo are either Grease lubricated or Oil lubricated. Refer to pages 5.3 and 5.4 to determine the unit
6 Lubricants. 6 Design and Operating Notes. 6.1 Lubricants. General information
Lubricants Design and Operating Notes.1 Lubricants General information Unless a special arrangement is made, SEW supplies the drives with a lubricant fill adapted for the specific gear unit and mounting
Catalog. Industrial Gear Units Planetary Gear Unit Series XP130 - XP250 Torque Range from 600 to 5200 knm * _0415*
Drive Technology \ Drive Automation \ System Integration \ Services *21249792_0415* Catalog Industrial Gear Units Planetary Gear Unit Series XP130 - XP250 Torque Range from 600 to 5200 knm Edition 04/2015
Handbuch für installation, betrieb und wartung Planetengetriebe
Italy Headquarters Installation, use and maintenance manual Manuale Installazione Uso e Manutenzione Riduttori Epicicloidali Installation, Operation and Service Manual Handbuch für installation, betrieb
Danfoss Bauer GmbH Esslingen BA GB
Danfoss Bauer GmbH 73726 Esslingen Operating instructions Direct current permanent magnet geared motors BA 148 04 GB 1 Installation The drive must be assembled and connected by qualified personnel (skilled
Routine Maintenance. Cat. No. IM
Installation and Routine Maintenance Cat. No. IM03-0714 INTRODUCTION The Premium Bevel Helical cooling tower gear units incorporates the very best in modern gear design. Each gear unit is manufactured
FLOTAX FC 1. TABLE OF CONTENT FLOTAX FC. Installation & Maintenance Manual ATEX UNIT SHIPPED WITHOUT OIL
ATEX UNIT SHIPPED WITHOUT OIL 1. TABLE OF CONTENT 1. Table of content... 1 2. Scope... 2 3. Sipping... 2 4. Maintenance... 2 5. Installation... 2 5.1. Mounting position... 2 5.2. Torque arm assembly...
Certified Quality System UNI EN ISO 9001 : 2008 SERVICE MANUAL PGRF series Release A10/14
312 Certified Quality System UNI EN ISO 9001 : 2008 www.comerindustries.com SERVICE MANUAL PGRF series Release A10/14 INDEX GENERAL INFORMATION... 3 GEARBOX UNIT IDENTIFICATION... 3 RISKS AND PRECAUTIONS...
Section 3.1. Machine Maintenance - Machine Maintenance Information. Important Preventive Maintenance Information: Maintenance Charts & Diagrams:
Section 3.1 Machine Maintenance - Machine Maintenance Information Maintenance Charts & Diagrams: Special Component Break-In Chart... 3.1.2 Preventive Maintenance Schedule Chart... 3.1.2 Lubrication Points
POWER GEAR The high performance bevel gearbox
MS-Graessner GmbH & Co. KG THE GEAR COMPANY The high performance bevel gearbox Precision combines with performance. Bevel gear technology is at the heart of an assembly consisting of gear housing, shafts,
3 Mounting Positions and Important Order Information
General information on mounting positions M1 Mounting Positions and Important Order Information.1 General information on mounting positions Mounting position designation SEW differentiates between si mounting
Installation and Maintenance. Helical and Bevel Helical Gear Units KUMERA POWER TRANSMISSION GROUP
Installation and Maintenance Helical and Bevel Helical Gear Units KUMERA POWER TRANSMISSION GROUP 2/37 Gear unit installation and maintenance 84 80 27A Kumera Drives Oy Headquarters Kumerankatu 2 FI-11100
DIN EN ISO 9001:2008 CYLINDER GEAR SUBMERGED OPERATION
DIN EN ISO 9001:2008 CYLINDER GEAR SUBMERGED OPERATION Important Information Intended use Gear units/geared motors are designed for the purpose of converting rotary speed and torque. They are intended
POWER GEAR. The high performance bevel gearbox.
MS-Graessner GmbH & Co. KG THE GEAR COMPANY The high performance bevel gearbox Precision combines with performance. Bevel gear technology is at the heart of an assembly consisting of gear housing, shafts,
DOCUMENTATION - INSTALLATION _ MAINTENANCE
Bevel gears DOKUMENTATION BETRIEBS_ UND WARTUNGSANLEITUNG DOCUMENTATION - INSTALLATION _ MAINTENANCE FOR BEVEL GEARS 1 Bevel gears Radial forces Permissible radial load (stress) on input (d 1 ) and output
M6 General notes on mounting positions R, F, K, S, W gear units
M M M General notes on mounting positions R, F, K, S, W gear units Preiskatalog Gear Unit Mounting Positions. General notes on mounting positions R, F, K, S, W gear units SEW-EURODRIVE differentiates between
Lubricating and Control Oils for Gas and Steam Turbines
Lubricating and Control Oils for Gas and Steam Turbines Specification and supervision en HTGD 90 117 V0001 U 1 Revision History Revision Content of Change Total No. of document pages: N 97-10-21, Extension
Powershift transmissions, type EcoLife, for buses, trucks, special vehicles and stationary applications List of lubricants TE-ML 20.
Commercial Vehicle Technology Powershift transmissions, type EcoLife, for buses, trucks, special vehicles and stationary applications List of lubricants TE-ML 20 Table of contents Page 1. Vehicle classification...
Powershift transmissions, type EcoLife, for buses List of lubricants TE-ML 20. Table of contents
Commercial Vehicle Technology Powershift transmissions, type EcoLife, for buses List of lubricants TE-ML 20 Table of contents Page 1. Vehicle classification... 1 2. Approved lubricant classes for EcoLife...1
7.3 Drive Chain Q
7 Maintenance of Drive & Brakes Drive Chain Q 409 452 7.3 Drive Chain Q 409 452 1 Description and Mode of Operation The drive chain (1) is a duplex chain that transmits the driving torque to the main shaft
TABLE OF CONTENTS. Shaft Mounted Planetgear Speed Reducer Owners Manual Type SMP Size Hercules (Page 1 of 21)
Type SMP Size Hercules (Page 1 of 21) TABLE OF CONTENTS Section I Introduction Basic Operation and Design...2 Sectional View and Component Identification...2 Nameplate Information....3 Section II Installation
Operating, lubrication and maintenance instructions for gearboxes and motors
Operating, lubrication and maintenance instructions for gearboxes and motors Index of contents General notes... 3 Worm gears... 4 Helical bevel gears, helical gears and slip-on gears... 5 Helical Bevel
TABLE OF CONTENTS. Shaft-Mounted Planetgear Speed Reducer Owners Manual Type SMP Size Jupiter (Page 1 of 23)
Type SMP Size Jupiter (Page 1 of 23) TABLE OF CONTENTS Section I Introduction Basic Operation and Design... 2 Sectional View and Component Identification... 2 Nameplate Information... 3 Section II Installation
Powershift transmissions, type EcoLife, for buses List of lubricants TE-ML 20. Table of contents
Commercial Vehicle Technology Powershift transmissions, type EcoLife, for buses List of lubricants TE-ML 20 Table of contents Page 1. Vehicle classification... 1 2. Approved lubricant classes for EcoLife...1
VIN: XXXXXXX Vehicle: 5'/F10/SEDAN/M5/S63/MANUAL/EUR/LL/2013/11
1/22/2014 1/11 SBS-ANL-SBS1996-110796138_A5 5.0 Longlife-01 VIN: XXXXXXX Vehicle: 5'/F10/SEDAN/M5/S63/MANUAL/EUR/LL/2013/11 System Version: 3.40.50.10150 Data Version: R3.40.50.10150 Enclosure 5 to SI
Serie 300. Installation, Operation and Maintenance Manual ATEX INCLUDED
Serie 300 Installation, Operation and Maintenance Manual ATEX INCLUDED USE, INSTALLATION AND MAINTENANCE MANUAL 1.0 GENERAL INFORMATION 2 1.1 PURPOSE OF THE MANUAL... 2 1.2 PRODUCT IDENTIFICATION... 3
TABLE OF CONTENTS. Falk RAM Parallel Shaft Mixer Drives Owners Manual Sizes 20 thru 22 Types HMX & HMH (Page 1 of 48)
Falk RAM Parallel Shaft Mixer Drives Owners Manual s 20 thru 22 Types HMX & HMH (Page 1 of 48) TABLE OF CONTENTS SECTION I INSTALLATION General Information Drive Description & Identification...3 Nameplate
PARAMAX. SFC Series The Cooling Tower Drives CW21
PARAMAX SFC Series The Cooling Tower Drives CW21 No. G2201E-2.1 No. G2201E-2 Features Optimised for cooling tower use 1 Selection Criteria The SFC Series was specifically designed for the Motor Size vs.
Technical Bulletin. 550 Trimmer LUBRICATION
Technical Bulletin 550 Trimmer TB550-00 Sheet: 1 of 1 Issue: 14. 06. 010 LUBRICATION CATEGORY: Information for actory Implementation Summary: Some customers have experienced problems with understanding
6 Design and operating notes
Error! B ookmark not d efined.error! Boo kmark not defin ed. Error! B ookmark not d efined.error! Boo kmark not defin ed. and operating notes Lubricants and operating notes.1 Lubricants.1.1 General information
Shaft Mounted Planetgear Speed Reducer Owners Manual Type SMP Size Orion (Page 1 of 20)
Shaft Mounted Planetgear Speed Reducer Owners Manual Type SMP Size Orion (Page 1 of 20) TABLE OF CONTENTS Section I Introduction Basic Operation and Design... 2 Sectional View and Component Identification...
EN Page 1/9 EGT-TD Lubricant approvals latest version:
EN Page 1/9 Change information: Chap. /page Description (changes to the previous edition) Modification no. General 1.3 / 4 1.4 / 5 1.5 / 6 SEW lubricants added. Lubricant supplier Texaco deleted. Chapter
KS TWINGEAR. Compact, precise and powerful.
MS-Graessner GmbH & Co. KG THE GEAR COMPANY Compact, precise and powerful Precision combines with performance. Bevel gear technology is at the heart of an assembly consisting of gear housing, shafts, flanges
Edition. Planetary Gear Units P..RF.., P..KF.. Series 12/2002. Operating Instructions X / EN
Planetary Gear Units P..RF.., P..KF.. Series Edition 12/2002 Operating Instructions 1055 291X / EN SEW-EURODRIVE Contents M1 M6 1 Important Notes... 4 2 Safety Notes... 5 2.1 Extended storage... 7 2.2
Examples of Applications
Examples of Applications Optimum positioning of the tooth contact pattern is essential for a precise, low-noise bevel gear pairing. Angular milling head with ground bevel gear set by MS-Graessner. High-transmission
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 14 / A / 103 / 0309 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 14 / A / 103 / 0309 / E Pump Drives - Gearboxes Mechanical Dry Clutches Hydraulic Clutches Pump Adaptors CONTENTS Pump Drives AM
LUBRICANT LIST FOR STERNTUBE SEALS <FOR SEAL TYPE AX, CX, DX>
BASE MAKER AEGEAN LUBRICANT LIST STERNTUBE SEALS < SEAL TYPE AX, CX, DX> ALFAMAR 340, 440 ALFASYS 305 BRAND CLADIUM 50 SAE 30 CLADIUM 120 SAE 30, 40 AGIP CLADIUM 300 SAE 30, 40 CLADIUM 400 SAE 30, 40 OTE
OPERATING INSTRUCTIONS. E Series Worm Gearboxes OIECE
OPERATING INSTRUCTIONS Worm Gearboxes OIECE0300-048 Contents Contents... 02 - How To Use This Manual... 04 2- Type Designation... 05 2. Detailed unit designation... 05 2.2 Nameplate unit designation...
FAMILY OF PRODUCTS MEROPA GEAR OILS CHEVRON LUBRICANTS CAN HELP YOU RUN BETTER LONGER
FAMILY OF PRODUCTS MEROPA GEAR OILS CHEVRON LUBRICANTS CAN HELP YOU RUN BETTER LONGER LUBRICANTS FOR MEROPA GEAR OILS We understand the maintenance value drivers in gear lubrication. Let us help your organization
Operating Instructions
ISO 9001 ISO 9001 Gear Units OIDCE0201-0814 Operating Instructions Contents Contents 1 How To Use This Manual... 04 2 Unit Designation... 05 2.1 Detailed unit designation... 05 2.2 Nameplate unit designation...
Series H Industrial Gearbox
Series H Industrial Gearbox Industrial Gearbox CH-2.00GB1211 PRODUCTS IN THE RANGE Serving an entire spectrum of mechanical drive applications from food, energy, mining and metal; to automotive, aerospace
INVOLUTE TOOLING CORPORATION
MANUFACTURERS OF DRIVES AND TRANSMISSIONS OFFICE: 13, JORBAGH, NEW DELHI - 110 003, INDIA, TEL: +91(011)24621453 FAX: +91(011) 24603609 WORKS: PLOT-65, SEC-27C, FARIDABAD - 121 003. INDIA, TEL: +91(0129)
Addendum to the Assembly and Operating Instructions
Drive Technology \ Drive Automation \ System Integration \ Services *2100516_017* Addendum to the Assembly and Operating Instructions Industrial Gear Units Motor Pump with Pressure Lubrication /ONP1 Edition
Planning Section. Environmental conditions. Different power supply. Industrial solutions
Planning Section 86 89 Environmental conditions Different power supply 90 Industrial solutions 91 Power calculation and selection of the Motorized Pulley for package transportation 93 Oil types and contents
INSTRUCTIONS FOR USE FACE GEARBOXES
INSTRUCTIONS FOR USE FACE GEARBOXES TNC MTC-TC KTM ES Declaration of Conformity Producer: TOS ZNOJMO, akciová společnost Družstevní 3 CZ 669 02 Znojmo Equipment: Face gearboxes Type/ Modification:MTC,
Addendum to the Assembly and Operating Instructions
Drive Technology \ Drive Automation \ System Integration \ Services *205516_017* Addendum to the Assembly and Operating Instructions Industrial Gear Units Motor Pump with Pressure Lubrication /ONP1L Edition
Hydrostatic-mechanical and electric drive systems List of lubricants TE-ML 07. Table of contents
Industrial Technology Hydrostatic-mechanical and electric drive systems List of lubricants TE-ML 07 Table of contents Page 1. Approved lubricant classes... 1 2. Low temperature limits... 2 3. Explanation
HOW TO USE THIS MANUAL
Falk Drive One Model C Enclosed Gear Drives Owners Manual Type D Series s M1130 thru M1210 (Page 1 of 29) HOW TO USE THIS MANUAL This manual provides detailed instructions on installation and maintenance
Operating Instructions
ISO 9001 ISO 9001 Gear Units OIVCE0101/0514 Operating Instructions Contents Contents... 02 1 - How to Use This Manual... 04 2 - Unit Designation... 05 2.1- Detailed Unit Designation... 05 2.2- Nameplate,
Powershift transmissions, type Ecomat (1), for buses, trucks, and special vehicles List of lubricants TE-ML 14. Table of contents
Commercial Vehicle Technology Powershift transmissions, type Ecomat (1), for buses, trucks, and special vehicles List of lubricants TE-ML 14 Table of contents Page 1. Approved lubricant classes... 1 Table
Falk RAM Mixer Drives Installation and Maintenance MDXU MDXQ
Types MDX, MDXQ, MDXT, MDH & MDHQ Sizes 00 thru 900 (Page 1 of 15) HOW TO USE THIS MANUAL This manual provides detailed instructions on installation and maintenance of gear drives and couplings. Use the
Lubricating instructions for linear guideways and ballscrews
Lubricating instructions for linear guideways and ballscrews HIWIN GmbH Brücklesbünd 2 Tel. +49 (0)781 / 9 32 78-0 E-mail info@hiwin.de 77654 Offenburg Fax +49 (0)781 / 9 32 78-90 www.hiwin.de These lubricating
not just a gear unit - every component manufactured with pride to exceed ISO 9000 standards by ISO 9000 certified manufacturer.
powerdrive SMGU - the ORIGINAL and the BEST not just a gear unit - every component manufactured with pride to exceed ISO 9000 standards by ISO 9000 certified manufacturer. technidrive www.technidrive.com
Operating instructions Gear Boxes and Geared Motors ZUVERLÄSSIG ANTREIBEND EFFIZIENT
Operating instructions Gear Boxes and Geared Motors ZUVERLÄSSIG NTREIBEND EFFIZIENT Edition 05/2016 Table of contents 1. Introduction.............................................................................
Falk Enclosed Gear Drives Installation and Maintenance. Type A Series Sizes 305 thru 585 (Page 1 of 17) Type ABRC
Type A Series Sizes 305 thru 585 (Page 1 of 17) HOW TO USE THIS MANUAL This manual provides detailed instructions on installation and maintenance of parallel shaft Types A, AR, AXV and right angle Types
MOTORIZED PULLEYS UNIT HANDLING
2 ED. MOT EN 03/14 2 ED. MOT EN 03/14 MOTORIZED PULLEYS UNIT HANDLING GENERAL CATALOGUE MOTORIZED PULLEYS UNIT HANDLING GENERAL CATALOGUE AXIS & Stuifmeel BV Coenecoop 1 2741 PG Waddinxveen Netherlands
Well-to-Wheels: Setting the Scene
Well-to-Wheels: Setting the Scene Michael Lane Secretary General, CONCAWE 21 st March 2011 CONservation of Clean Air and Water in Europe The Oil Companies European association for health, safety and environment
BA EN.A0= L force Geared Motors. Ä.A0=ä. Operating Instructions GST, GFL, GKS/GKL, GKR, GSS. Gearbox
BA 12.0023 EN.A0= L force Geared Motors Ä.A0=ä Operating Instructions G GST, GFL, GKS/GKL, GKR, GSS Gearbox Product key Legend for product key Gearbox type GST GFL GKS/GKL GKR GSS Helical gearbox Shaft
Marine transmissions List of lubricants TE-ML 04. Table of contents
Industrial Technology Marine transmissions List of lubricants TE-ML 04 Table of contents Page 1. Approved lubricant classes... 1 2. Oil Level Check and Change Intervals...2 3. Explanation of footnotes
Marine transmissions List of lubricants TE-ML 04
Industrial Technology Marine transmissions List of lubricants TE-ML 04 ZF 4 to ZF 115 with all derived variants M, A, IV, C, TS, ATS, IVTS Product groups Lubricant classes for service fills (1) ZF 220
KAVITSU Excellence in Gear Technology. The compact And Efficient
KAVITSU Excellence in Gear Technology The compact And Efficient OUR RANGE OF PRODUCT PLANETARY SPEED REDUCER TORQUE :- 0 Nm TO 50 00 000 Nm :- : TO 00000 : POWER :- 0.8 KW TO 000 KW MOUNTING :- FOOT, FLANGE,
Motor driven diaphragm metering pump P D S V N PUMP HEAD MATERIAL. O RING V FKM B D Dutral LUBRICANT TYPE
Motor-driven diaphragm dosing pump, mechanical actuated, PRIUS combines efficiency and chemical resistance to a wide capacity range for an extensive number of applications. ATEX II 2 G c IIB T3, T4 II
Operating Instructions
ISO 9001 ISO 9001 Gear Units OITCE0101-1112 Operating Instructions Contents Contents 1 How To Use This Manual... 05 2 Unit Designation... 06 2.1 Detailed unit designation... 06 2.2 Nameplate unit designation...
Tractor transmissions and hydraulic lifts List of lubricants TE-ML 06. Table of contents
Industrial Technology Tractor transmissions and hydraulic lifts List of lubricants TE-ML 06 Table of contents Page 1. Approved lubricant classes... 1 1.1 Powershift transmission and synchromesh transmission...1
WORM REDUCTION GEAR UNITS INSTALLATION, OPERATION AND MAINTENANCE MANUAL
WORM REDUCTION GEAR UNITS INSTALLATION, OPERATION AND MAINTENANCE MANUAL SFU SNU-UD SSM SFO SNU SFV 1 1) INTRODUCTION The proper working of a gear unit depends on careful instalolation, correct grade of
Geared motors. G-motion const. G-motion const
Geared motors G-motion const G-motion const Product code Geared motors Type designation Gearbox Gearbox No. of Input Output Drive size type size stages design design G G G G G S F K K S T L S R S Helical
Marine transmissions List of lubricants TE-ML 04. Table of contents
Industrial Technology Marine transmissions List of lubricants TE-ML 04 Table of contents Page 1. Approved lubricant classes... 1 2. Oil level check and change intervals...2 3. Explanation of footnotes
Section 5. Maintenance. Risk of Burns. Relieving Pressure. Important when Using Cleaning Agents. Maintenance 5-1
5-1 Section 5 WARNING: Allow only qualified personnel to perform the following tasks. Observe and follow the safety instructions in this document and all other related documentation. NOTE: is an important
Tractor transmissions and hydraulic lifts List of lubricants TE-ML 06. Table of contents
Industrial Technology Tractor transmissions and hydraulic lifts List of lubricants TE-ML 06 Table of contents Page 1. Approved lubricant classes... 1 1.1 Powershift transmission and synchromesh transmission...1
TA Technical Instruction. Lubricating oil for type 2, 3, 4 and 6 Jenbacher engines. GE Power
GE Power TA 1000-1109 Lubricating oil for type 2, 3, 4 and 6 Jenbacher engines Technical Instruction GE Jenbacher GmbH & Co OG Achenseestr. 1-3 A-6200 Jenbach, Austria www.gejenbacher.com 1 Scope... 1
The list of lubricants TE-ML 04, edition 02.04.2017 replaces all ZF Friedrichshafen AG previous editions. The current list can be requested from any ZF D-88038 Friedrichshafen after-salesservice center