RFP # 6632 EXHIBIT 3 Technical Specifications Supply of Wärtsilä Gas Engine Lubrication Oil and Cooling System Glycol

Size: px
Start display at page:

Download "RFP # 6632 EXHIBIT 3 Technical Specifications Supply of Wärtsilä Gas Engine Lubrication Oil and Cooling System Glycol"

Transcription

1 RFP # 6632 EXHIBIT 3 Technical Specifications Supply of Wärtsilä Gas Engine Lubrication Oil and Cooling System Glycol A. PURPOSE The City of Denton is providing information that will allow prospective suppliers to prepare submissions to supply a bulk quantities of gas engine lubrication oil and monopropylene glycol (MPG). The product will be received at the Denton Energy Center, which is located at 8161 Jim Christal Road, Denton TX, B. SUBMISSIONS Submissions shall be provided using the Exhibit 1, with supporting documentation as required. Additional information clarifying the supplier s product may be attached to their submission. Pricing shall include all costs to deliver goods as specified in this specification. Any special fees or commissions, and all freight for delivery to the Denton Energy Center must be included in the quoted price. Item pricing shall be mutually exclusive, thus the City of Denton reserves the right to choose the best valued item from different vendors. C. QUALITY CONTROL The manufacturer shall be responsible for the quality control of the manufacturing processes to assure that all requirements of these specifications are met. However, the City reserves the right to sample and test all products at time of delivery. Visible signs of contamination at time of delivery will result in the product being rejected. D. WRITTEN WARRANTY and GUARANTEES Written guarantees shall include any limitations as to the nature of failure or time limitations. The guarantee shall begin upon receipt of the accepted units, not on the date of manufacture. Guarantees shall indicate whether or not it is made on a full replacement basis or a prorated basis and if prorated then what are the terms. Lube oil Manufacturer/supplier guarantees that the products furnished under this specification are of virgin quality. All replacements by the manufacturer/supplier shall be free of charge F.O.B. at the same delivery point called for in the original order. The respondent must be an approved distributor by the manufacturer of these products, and is authorized to sell the products to the City of Denton. The respondent also guarantees that the City will be represented by the Manufacturer, should an issue arise, and that all manufacturer s warranties will be in effect for the life of the contract. IFB 6632 Exhibit 3 Page 1 of 6

2 E. SPECIAL DELIVERY REQUIREMENTS Deliveries shall be made between 8:00 AM - 12:00 PM Monday through Friday, excluding holidays to Denton Energy Center, 8161 Jim Christal Road, Denton, TX The location has pumping equipment to off load oil. Glycol must be delivered in totes. The location will have the ability to offload totes. Empty glycol totes must be picked up by supplier. F. TECHNICAL REQUIREMENTS SUPPLIER BRAND NAME VISCOSITY BN SULPHATED ASH (%M/M) CHEVRON (TEXACO + CALTEX) HDAX 5200 LOW ASH GAS ENGINE OIL EXXONMOBIL PEGASUS SHELL MYSELLA S5 N Validated gas engine oils based on API Gp II and IV base oils The only accepted products are listed above. Glycol shall be of the monopropylene type. The supplier shall specify the water and glycol ratio for their product to achieve a freeze protection point of 15 Fahrenheit. The total cooling system volume is 51,590 gallons. Documentation supporting the ratio must be supplied with bid documents. G. ACCEPTABLE MANUFACTURERS DME will only accept submissions from specific manufacturers listed in the approved manufacturers list below. Lube Oil 1. Chevron (Texaco + Caltex) 2. ExxonMobil 3. Shell Glycol Any brand of monopropylene glycol that is available in commercial quantities. The glycol will only be accepted in tote quantities. IFB 6632 Exhibit 3 Page 2 of 6

3 Wärtsilä Corporation Finland Technology INSTALLATION MANUAL This doc is the property of Wärtsilä Corp. and shall neither be copied, shown or communicated to a third party without the consent of the owner. Subtitle Product Made K. Juoperi / J. Norrgård Page Document No Rev - Wärtsilä 34SG Wärtsilä 34LPG Wärtsilä 50SG Appd U. Åstrand 1 (4) 4V92A0780 k Changed by: K. Revised date: Juoperi/F. Zhang Approved by: J. Mikkilä/A. Vakkila Change notice No.: CN-A REQUIREMENTS AND OIL QUALITY LUBRICATING OIL REQUIREMENTS AND QUALITY FOR WÄRTSILÄ 34SG, WÄRTSILÄ 34LPG AND WÄRTSILÄ 50SG ENGINES Viscosity Viscosity class Viscosity Index (VI) Min. 95 Alkalinity (BN) Lubricating oils with BN of 4-7 mg KOH/g have to be used. Sulphated ash level The content of sulphated ash in gas engine lubricating oils is a very important property. Too high ash content can cause preignition, knocking and spark plug fouling, while too low ash content can lead to increased valve wear. Low ash lubricating oils with sulphated ash level of max. 0,6 % m/m have to be used. Additives The oils shall contain additives that give good oxidation stability, corrosion protection, load carrying capacity, neutralisation of acid combustion and oxidation residues and should prevent deposit formation on internal engine parts. Foaming characteristics Fresh lubricating oil shall meet the following limits for foaming tendency and stability, according to the ASTM D test method: Sequence I: Sequence II: Sequence III: 100/0 ml 100/0 ml 100/0 ml Base oils Use of virgin base stocks is only allowed, i.e. recycled or re-refined base oils are not allowed. IFB 6632 Exhibit 3 Page 3 of 6

4 Page 2 (4) Document No 4V92A0780 Rev k CONDEMNING LIMITS FOR USED LUBRICATING OIL When estimating the condition of used lubricating oil, the following properties along with the corresponding limit values must be noted. If the limits are exceeded, measures must be taken. Compare also with guidance values for fresh lubricating of the brand used. PROPERTY UNIT LIMIT TEST METHOD Viscosity cst at 40 C max. 50% increase ASTM D 445 Viscosity cst at 100 C max. 25% increase ASTM D 445 Water % v/v or % m/m max. 0,30 ASTM D 95 or D 6304C Base Number mg KOH/g max. 50% depletion ASTM D 2896 Total Acid Number mg KOH/g max. 2,5 mg KOH/g ASTM D 664 increase Insolubles % m/m in max. 1,0 ASTM D 893b n-pentane Oxidation Abs/cm max. 25 IR Nitration Abs/cm max. 20 IR CHANGE OF LUBRICATING OIL BRAND Top-up with another lubricating oil brand than being filled to the system is not allowed, except if the both two lubricating oils originate from the same manufacturer and are based on same base oils and additive technology. Otherwise the lubricating oil system has to be drained and then filled with another brand by following the procedure described here below. In order to minimize the risk of lubricating oil foaming, deposit formation, blocking of lubricating oil filters, damage of engine components, etc., the following procedure should be followed when lubricating oil brand is changed from one to another: If possible, change the lubricating oil brand in connection with an engine (piston) overhaul Drain old lubricating oil from the lubricating oil system Clean the lubricating oil system in case of an excessive amount of deposits on the surfaces of engine components, like crankcase, camshaft compartment, etc. Fill the lubricating oil system with fresh lubricating oil If the procedure described above is not followed, responsibility of possible damage and malfunctions caused by lubricating oil change should always be agreed between the oil company and customer. IFB 6632 Exhibit 3 Page 4 of 6

5 Page 3 (4) Document No 4V92A0780 Rev k VALIDATED LUBRICATING OIL QUALITIES FOR WÄRTSILÄ 34SG, WÄRTSILÄ 34LPG AND WÄRTSILÄ 50SG NATURAL GAS AND LIQUEFIED PETROLEUM GAS OPERATION There exists experience that lubricating oils manufactured from API Group II or IV base oils are able to offer better cleanliness of exhaust gas boiler / economizer compared to lubricating oils manufactured from API Group I base oils and are thus recommended in the first place for such applications. In some cases also longer change intervals may be achieved by using API Gp II or IV based products. Table 1: Validated gas engine oils based on API Gp II and IV base oils: SUPPLIER BRAND NAME VISCOSITY BN SULPHATED ASH (% m/m) Bharat Petroleum MAK GES XLA 40 5,3 0,48 Corp. Ltd. Chevron (Texaco HDAX 5200 Low Ash 4,2 0,50 + Caltex) Gas Engine Oil ExxonMobil Pegasus 905 Pegasus 1005 Pegasus 1 6,2 5,0 6,5 0,49 0,50 0,49 Idemitsu Kosan Apolloil GHP 40L 4,7 0,45 Co. Ltd. MOL-LUB Ltd. MOL GMO Longlife 40 6,6 0,50 Pakelo Motor Oil Geoterm LA 4 6,6 0,50 S.r.l. Petro-Canada Sentron LD ,9 0,57 Petronas GEO S 40 5,6 0,46 Sasol Gas Engine Oil LA 40 5,5 0,50 Shell Mysella S5 N 40 4,5 0,48 Total Nateria X 405 *) 5,2 0,45 Table 2: Validated gas engine oils based on API Gp I base oils: SUPPLIER BRAND NAME VISCOSITY BN SULPHATED ASH (% m/m) Castrol Duratec L 4,5 0,45 Chevron (Texaco Geotex LA 40 5,2 0,45 + Caltex) ExxonMobil Pegasus 705 Pegasus 805 5,3 6,2 0,49 0,50 Lukoil Efforse ,56 0,49 Petrogal Galp GN ,2 0,45 Shell Mysella S3 N 40 5,0 0,45 IFB 6632 Exhibit 3 Page 5 of 6

6 Page 4 (4) Document No 4V92A0780 Rev k USE OF NON-VALIDATED LUBRICATING OILS: Before using a lubricating oil not listed in the tables above, the engine manufacturer must be contacted. Lubricating oils that are not validated have to be tested according to engine manufacturer s procedure. Should a non-validated lubricating oil be used during the engine warranty period, and there exist no agreement with the engine manufacturer about testing, the engine guarantee does not hold. Lubricating oil companies listed above along with other possible manufacturers and distributors undertake all responsibility for the performance of their validated lubricating oils in service to the exclusion of any liability of any Wärtsilä company belonging to Wärtsilä group. Further, they shall indemnify, compensate and hold harmless Wärtsilä and companies belonging to Wärtsilä group from and against any claims, damages and losses caused by the lubricating oils in question. LUBRICATING OILS FOR ENGINE TURNING DEVICE Based on the turning device manufacturer s instructions EP-gear oils having viscosity of cst at 40 C = ISO VG 460 are normally considered as suitable lubricating oils for turning device. The following products are fulfilling the requirements: LUBRICATING OILS FOR ENGINE TURNING DEVICE SUPPLIER BRAND NAME VISCOSITY cst at 40 C VISCOSITY cst at 100 C VISCOSITY INDEX (VI) BP Energol GR-XP ,5 95 Castrol Alpha SP ,5 95 Chevron (Texaco Meropa , Caltex) ENI S.p.A. Blasia ,0 95 ExxonMobil Mobilgear 600 XP ,6 96 Fuchs Renolin CLP ,4 95 Petro-Canada Enduratex EP ,4 97 Shell Omala S2 G ,8 97 Total / Lubmarine Carter EP ,3 93 IFB 6632 Exhibit 3 Page 6 of 6

REGULATION No.: ENGINE OIL CHARGES FOR STATIONARY GAS TEDOM ENGINES

REGULATION No.: ENGINE OIL CHARGES FOR STATIONARY GAS TEDOM ENGINES NUMBER OF SHEETS: 7 SHEET: 1 9 INDEX NAME: ENGINE OIL CHARGES FOR STATIONARY GAS TEDOM ENGINES 1. DETERMINATION OF THE SCOPE OF VALIDITY This Regulation covers motor oil charges specified for stationary

More information

/10 EN. Lubricating Oil for MWM Gas Engines. Technical Bulletin. The 10th replacement is made because of:

/10 EN. Lubricating Oil for MWM Gas Engines. Technical Bulletin. The 10th replacement is made because of: This Circular supersedes: 0199-99 - 02105/9 Lubricating Oil for MWM Gas Engines The 10th replacement is made because of: - Updating of the released lubricating oils This technical bulletin contains: -

More information

2105/18 EN. Specification for Lubricating Oil. Technical Bulletin. The 18th replacement is made on account of:

2105/18 EN. Specification for Lubricating Oil. Technical Bulletin. The 18th replacement is made on account of: This Circular supersedes: 2105/17 Specification for Lubricating Oil Valid for: MWM Gas Engines The 18th replacement is made on account of: Limit values - Test method i ph value added Introduction of new

More information

TA Technical Instruction. Lubricating oil for type 2, 3, 4 and 6 Jenbacher engines. GE Power

TA Technical Instruction. Lubricating oil for type 2, 3, 4 and 6 Jenbacher engines. GE Power GE Power TA 1000-1109 Lubricating oil for type 2, 3, 4 and 6 Jenbacher engines Technical Instruction GE Jenbacher GmbH & Co OG Achenseestr. 1-3 A-6200 Jenbach, Austria www.gejenbacher.com 1 Scope... 1

More information

SERVICE BULLETIN. TOPIC: Lubrication System IDENT NO: AF DATE: November 2010 SUPERSEDES: AE. Dresser Waukesha Oil Recommendations

SERVICE BULLETIN. TOPIC: Lubrication System IDENT NO: AF DATE: November 2010 SUPERSEDES: AE. Dresser Waukesha Oil Recommendations SUBJECT: MODELS AFFECTED: Dresser Waukesha Oil Recommendations All Dresser Waukesha Engines SERVICE BULLETIN TOPIC: Lubrication System IDENT NO: 12-1880AF DATE: November 2010 SUPERSEDES: 12-1880AE SUMMARY

More information

Tabelle A-a Standardmineralöle für FLENDER Stirnrad-, Kegelrad-, Planetengetriebe und 'Marinegetriebe ohne Lamellenkupplung' sowie Getriebemotoren

Tabelle A-a Standardmineralöle für FLENDER Stirnrad-, Kegelrad-, Planetengetriebe und 'Marinegetriebe ohne Lamellenkupplung' sowie Getriebemotoren Approved lubricants --- Freigegebene Schmierstoffe T 7300 Table A-a Standard mineral oils for FLENDER helical, bevel-helical, planetary gear boxes and 'Marine gear Tabelle A-a Standardmineralöle für FLENDER

More information

LUBRICATION OIL LIST FOR SIMPLEX STERN TUBE BUSHES, INTERMEDIATE SHAFT BEARINGS AND SEALS

LUBRICATION OIL LIST FOR SIMPLEX STERN TUBE BUSHES, INTERMEDIATE SHAFT BEARINGS AND SEALS LUBRICATION OIL LIST FOR SIMPLEX STERN TUBE BUSHES, INTERMEDIATE SHAFT BEARINGS AND SEALS The SIMPLEX seal is fitted with sealing rings of Perbunan or Viton depending on the operating conditions. The following

More information

Draft Indian Standard SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION

Draft Indian Standard SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION Comments Only BUREAU OF INDIAN STANDARDS Draft Indian Standard Doc:PCD 3(2537)C September 2012 SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION Not to be reproduced without the permission

More information

KHN SERIES HELICAL & BEVEL SPEED REDUCER OIL FILL SPECIFICATIONS AND REQUIREMENTS

KHN SERIES HELICAL & BEVEL SPEED REDUCER OIL FILL SPECIFICATIONS AND REQUIREMENTS WorldWide Electric Corporation 3540 Winton Place Rochester, NY 14623 24/7 Phone: (800) 808-2131 Fax: (800) 711-1616 worldwideelectric.net LUBRICATION SPECIFICATION KHN SERIES HELICAL & BEVEL SPEED REDUCER

More information

Lubricating and Control Oils for Gas and Steam Turbines

Lubricating and Control Oils for Gas and Steam Turbines Lubricating and Control Oils for Gas and Steam Turbines Specification and supervision en HTGD 90 117 V0001 U 1 Revision History Revision Content of Change Total No. of document pages: N 97-10-21, Extension

More information

PRODUCT INFORMATION RENOLIN DTA. Lubricating and hydraulic oils. Description. Advantages. Application. Specifications

PRODUCT INFORMATION RENOLIN DTA. Lubricating and hydraulic oils. Description. Advantages. Application. Specifications Description Hydraulic and lubricating oils made from selected base oils with additives to improve ageing stability and corrosion protection. The products in the RENOLIN DTA series are hydraulic and lubricating

More information

STANDBY SERVICE. Transmission Service Primary Service Secondary Service

STANDBY SERVICE. Transmission Service Primary Service Secondary Service a division of Otter Tail Corporation Rate Designation C-10M, Page 1 of 6 STANDBY SERVICE OPTION A: FIRM OPTION B: NON-FIRM On-Peak Off-Peak On-Peak Off-Peak Transmission Service 927 928 937 938 Primary

More information

Installation and Maintenance Manual

Installation and Maintenance Manual Installation and Maintenance Manual WorldWide Helical Inline Speed Reducers This operation manual includes important information for the installation, assembly, operation and maintenance of the WorldWide

More information

Operating Instructions

Operating Instructions Operating Instructions Table of contents Table of contents... 1 1. Declaration... 1 2. Warranty and liability... 2 3. Gear description... 2 4. Gear types... 2 5. Safety... 3 5.1 General safety information...

More information

5 Gear units, types of installation, lubricant quantities. 5.1 Standard fitting positions/ types of installation for Bauer geared motors

5 Gear units, types of installation, lubricant quantities. 5.1 Standard fitting positions/ types of installation for Bauer geared motors 26 5 Gear units, types of installation, lubricant quantities 5.1 Standard fitting positions/ types of installation for Bauer geared motors 5 27 28 5.2 Position of the terminal box and the cable entry points

More information

Section 3.1. Machine Maintenance - Machine Maintenance Information. Important Preventive Maintenance Information: Maintenance Charts & Diagrams:

Section 3.1. Machine Maintenance - Machine Maintenance Information. Important Preventive Maintenance Information: Maintenance Charts & Diagrams: Section 3.1 Machine Maintenance - Maintenance Charts & Diagrams: Special Component Break-In Chart... 3.1.2 Preventive Maintenance Schedule Chart... 3.1.2 Lubrication Points Diagram... 3.1.3 Lubricant &

More information

Mobil SHC Gear Series

Mobil SHC Gear Series Mobil SHC Gear Series Gear Oils Product Description Mobil SHC Gear Series is a line of exceptional performance, synthetic industrial gear oils designed to provide outstanding protection of gears and bearings,

More information

1.1 Unless otherwise stated, the specification references and test methods are from the latest version in effect at the time of this contract.

1.1 Unless otherwise stated, the specification references and test methods are from the latest version in effect at the time of this contract. (Page 1 of 6) LUBRICATING PRODUCTS MGS-92-12K 1.0 DESCRIPTION. This specification covers motor vehicle lubricating products for delivery in prepackaged containers such as drums, pails, etc., or for delivery

More information

MILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL

MILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL INCH-POUND MIL-DTL-83767C 24 September 2007 SUPERSEDING MIL-L-83767B 8 February 1980 MILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL Reactivated after 24 September 2007 and may be used

More information

Industrial Chemical Standards Supplied by

Industrial Chemical Standards Supplied by Industrial Chemical Standards Supplied by jagschemes@live.com.au Standard Specification for Glycol Base Engine Coolant for Automobile and Light- Duty Service 1. Scope 1.1 This specification covers the

More information

Shell Marine Products SHELL ARGINA PROVEN TO PROVIDE ADVANCED OIL-STRESS MANAGEMENT

Shell Marine Products SHELL ARGINA PROVEN TO PROVIDE ADVANCED OIL-STRESS MANAGEMENT Shell Marine Products SHELL ARGINA PROVEN TO PROVIDE ADVANCED OIL-STRESS MANAGEMENT THE STRESSES AND CHALLENGES FACING MARINE ENGINE OPERATORS Market and operational changes, and new engine designs are

More information

Certified Quality System UNI EN ISO 9001 : 2008 SERVICE MANUAL PGRF series Release A10/14

Certified Quality System UNI EN ISO 9001 : 2008 SERVICE MANUAL PGRF series Release A10/14 312 Certified Quality System UNI EN ISO 9001 : 2008 www.comerindustries.com SERVICE MANUAL PGRF series Release A10/14 INDEX GENERAL INFORMATION... 3 GEARBOX UNIT IDENTIFICATION... 3 RISKS AND PRECAUTIONS...

More information

PROPOSAL FORM 2014 FUEL BID

PROPOSAL FORM 2014 FUEL BID PROPOSAL FORM 2014 FUEL BID COUNTY OF SIBLEY, MINNESOTA BIDS CLOSE: NOVEMBER 22, 2013 AT 4:30 P.M. PROPOSAL TO: SIBLEY COUNTY PUBLIC WORKS TIMOTHY BECKER PUBLIC WORKS DIRECTOR 111 8 TH STREET PO BOX 897

More information

Synthetic EP air compressor oils based on PAO, for turbo, screw, vane and piston compressors; High-performance synthetic, PAO-based hydraulic fluids

Synthetic EP air compressor oils based on PAO, for turbo, screw, vane and piston compressors; High-performance synthetic, PAO-based hydraulic fluids Description Compressed air has become a major form of energy and the reliable generation of compressed air is vital. Operators require compressors to function perfectly over and beyond entire service intervals.

More information

314 ORDINARY MAINTENANCE MANUAL FOR. PGA series VERTICAL MOUNTING POSITION. Release A02/15

314   ORDINARY MAINTENANCE MANUAL FOR. PGA series VERTICAL MOUNTING POSITION. Release A02/15 314 www.comerindustries.com ORDINARY MAINTENANCE MANUAL FOR PGA series VERTICAL MOUNTING POSITION Release A02/15 INDEX General information...page 3 Ordinary maintenance...page 4 Oil lubricant replacement...page

More information

Catalogue geared motors. Edition 01/

Catalogue geared motors. Edition 01/ Catalogue geared motors Edition 0/0 Page Gearboxes and Lubrication Standard fitting - BG and BF - BK and BS Position of the terminal box and the cabel entry - BG and BF - BK and BS Radial and axial forces

More information

UNIFIED FACILITIES GUIDE SPECIFICATIONS

UNIFIED FACILITIES GUIDE SPECIFICATIONS USACE / NAVFAC / AFCEC / NASA UFGS-48 06 15 (May 2014) ---------------------------------- Preparing Activity: USACE Superseding UFGS-48 13 19.00 10 (January 2008) UNIFIED FACILITIES GUIDE SPECIFICATIONS

More information

MATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT

MATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 1103 FEBRUARY 1996 MATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT 1103.01 SCOPE 1103.02 REFERENCES 1103.03 Not Used 1103.04 Not Used 1103.05 MATERIALS

More information

Komatsu Genuine Lubricants & Coolant. Superior protection

Komatsu Genuine Lubricants & Coolant. Superior protection Lubricants & Coolant Superior protection Komatsu Genuine Lubricants & Coolant Diesel Engine Oil Hydraulic Oil Axle Oil Powertrain Oil Super-coolant AF-NAC Komatsu Oil/Fuel & Wear Analysis KOWA Superior

More information

Hydraulic Fluids. Castrol Blue Hydraulic Plus C 19. Product Data. Water Tolerance. Thermal Stability Oxidation and Control

Hydraulic Fluids. Castrol Blue Hydraulic Plus C 19. Product Data. Water Tolerance. Thermal Stability Oxidation and Control C 19 meets the most severe industry requirements including the new hybrid test from Denison (T6H2OC), which incorporates both vane and piston pumps under wet and dry conditions over 600 hours. Formulated

More information

St. Clair County Road Commission Specifications Diesel Fuels

St. Clair County Road Commission Specifications Diesel Fuels Sealed bids will be received at the office of the Board of County Road Commissioners of the County of St. Clair, 21 Airport Drive, St. Clair, Michigan 48079, until 1:00 p.m., local prevailing time, WEDNESDAY,

More information

ADDENDUM NO. 1 INVITATION FOR BIDS FOR LUBRICANT AND FLUID SUPPLY. RFP NO.: 2018-SP-03 Date Issued: March 13, 2018

ADDENDUM NO. 1 INVITATION FOR BIDS FOR LUBRICANT AND FLUID SUPPLY. RFP NO.: 2018-SP-03 Date Issued: March 13, 2018 ADDENDUM NO. 1 INVITATION FOR BIDS FOR LUBRICANT AND FLUID SUPPLY RFP NO.: 2018-SP-03 Date Issued: March 13, 2018 INSTRUCTIONS: (1) BIDDER is required to comply with this Addendum No. 1. (2) This Addendum

More information

Addendum to the Assembly and Operating Instructions

Addendum to the Assembly and Operating Instructions Drive Technology \ Drive Automation \ System Integration \ Services *235971_317* Addendum to the Assembly and Operating Instructions Industrial Gear Units X.. Series Helical and Bevel-Helical Gear Units

More information

2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES

2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES 2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES 2-CYCLE CLAIMS PACK SIZES Universal * 12/2.6 Ounces 60179 12/8 Ounces 60138 Synthetic Universal * 12/2.6 Ounces 63119 Synthetic Blend with Fuel Stabilizer

More information

ENGINEERING AND CONSTRUCTION BULLETIN

ENGINEERING AND CONSTRUCTION BULLETIN ENGINEERING AND CONSTRUCTION BULLETIN No. 2007-21 Issuing Office: CECW-CE Issued: 16 Nov 2007 Subject: Revision to EM 1110-2-1424 Lubricants and Hydraulic Fluids - Appendix C Applicability: Guidance 1.

More information

Natural Gas Engine Oil Considerations

Natural Gas Engine Oil Considerations Natural Gas Engine Oil Considerations CHEVRON LUBRICANTS CAN HELP YOU RUN BETTER LONGER. 1 Introduction The purpose of this deck is to provide ancillary information that can help in the sales process of

More information

HDAX FAMILY OF PRODUCTS

HDAX FAMILY OF PRODUCTS HDAX FAMILY OF PRODUCTS Chevron formulates, blends and distributes gas engine oils throughout the world. From field gathering, compression, processing, transmission and power generation, we are there,

More information

Various tests and analysis will be carried out at testing laboratory on the received samples such as:

Various tests and analysis will be carried out at testing laboratory on the received samples such as: 2 Testing Various tests and analysis will be carried out at testing laboratory on the received samples such as: - General Quality Control Test - Special Analysis Tests as requested 2.1 General Quality

More information

CETUS HIPERSYN OIL 32, 46, 68, 100, 150, 220, 320, 460

CETUS HIPERSYN OIL 32, 46, 68, 100, 150, 220, 320, 460 CETUS HIPERSYN OIL 32, 46, 68, 100, 150, 220, 320, 460 PRODUCT DESCRIPTION Cetus HiPerSYN Oils are synthetic compressor oils. Cetus HiPerSYN Oils are recommended for air compressors; especially portable

More information

Mobil DTE 700 Series. Product Description. Features and Benefits. Premium Turbine Oils

Mobil DTE 700 Series. Product Description. Features and Benefits. Premium Turbine Oils Mobil DTE 700 Series Premium Turbine Oils Product Description Mobil DTE 700 Series lubricants are the latest addition to the Mobil DTE turbine lubricant family of products, long recognized for their high

More information

RENOLIN CLP PLUS Long-term approved special gear oils with extremely high ageing stability and excellent detergency (DD) selfcleaning

RENOLIN CLP PLUS Long-term approved special gear oils with extremely high ageing stability and excellent detergency (DD) selfcleaning Long-term approved special gear with extremely Description Special lubricants are designed to solve problems and to guarantee trouble-free working at severe ambient conditions. The products of the RENOLIN

More information

PETROLEUM TRADERS CORPORATION RIGGINS, INC.

PETROLEUM TRADERS CORPORATION RIGGINS, INC. BID RESULTS CK09MERCER2015-10 DIESEL FUEL AND WINTER MIX FOR THE COUNTY OF MERCER AND THE MERCER COUNTY COOPERATIVE MEMBERS BID OPENING DATE: JUNE 30, 2015 AWARD FOR A PERIOD OF TWO (2) YEARS; BASED UPON

More information

The values listed below are typical of current production. As variations may occur, these numbers do not constitute a specification.

The values listed below are typical of current production. As variations may occur, these numbers do not constitute a specification. HEAVY-DUTY DIESEL MOTOR OIL D-MO 10W-30, 15W-40 PRODUCT DESCRIPTION D-MO (Diesel Motor Oil) is designed to exceed the tests required for the new API CK-4 specification for all naturally aspirated and high-output

More information

5 Lubrication, Cooling and Heating

5 Lubrication, Cooling and Heating Overview of the and cooling types Lubrication, and Heating.1 Overview of the and cooling types The following combinations of and cooling types are possible. Lubrication Splash with shaft end pump /SEP

More information

HL - MHL SPA SOCIETÀ ITALIANA TRASMISSIONI INDUSTRIALI. INSTALLATION, OPERATION and MAINTENANCE MANUAL

HL - MHL SPA SOCIETÀ ITALIANA TRASMISSIONI INDUSTRIALI. INSTALLATION, OPERATION and MAINTENANCE MANUAL SPA SOCIETÀ ITALIANA TRASMISSIONI INDUSTRIALI HL - MHL TM INSTALLATION, OPERATION and MAINTENANCE MANUAL 03.2005 Table of contents Contacting our service department... 4 Operation... 5 Maintenance... 6

More information

RANDO HDZ 15, 22, 32, 46, 68, 100

RANDO HDZ 15, 22, 32, 46, 68, 100 RANDO HDZ 15, 22, 32, 46, 68, 100 PRODUCT DESCRIPTION Rando HDZ oils are formulated with premium base oil technology and designed to give robust protection to hydraulic pumps. CUSTOMER BENEFITS Rando HDZ

More information

ADDENDUM NO. 1 INVITATION FOR BID FOR BUS ENGINE SUPPLY. IFB NO: 2018-FP-08 Date Issued: August 6, 2018

ADDENDUM NO. 1 INVITATION FOR BID FOR BUS ENGINE SUPPLY. IFB NO: 2018-FP-08 Date Issued: August 6, 2018 602 N. Staples, Corpus Christi, Texas 78401 p. 361-289-2712 f. 361-903-3578 www.ccrta.org ADDENDUM NO. 1 INVITATION FOR BID FOR BUS ENGINE SUPPLY IFB NO: 2018-FP-08 Date Issued: August 6, 2018 INSTRUCTIONS:

More information

2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES

2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES 2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES 2-CYCLE CLAIMS PACK SIZES Universal * 12/2.6 Ounces 60179 12/8 Ounces 60138 Synthetic Universal * 12/2.6 Ounces 63119 Synthetic Blend with Fuel Stabilizer*

More information

ADDINOL High-performance Lubricants for Gas Engines

ADDINOL High-performance Lubricants for Gas Engines ADDINOL High-performance Lubricants for Gas Engines www.addinol.de ADDINOL German Quality since 1936 Solutions for all lubrication-related challenges ADDINOL is one of the few companies in the German mineral

More information

SERBIATRIB th International Conference on Tribology. Kragujevac, Serbia, May 2011

SERBIATRIB th International Conference on Tribology. Kragujevac, Serbia, May 2011 Serbian Tribology Society SERBIATRIB 11 12 th International Conference on Tribology Kragujevac, Serbia, 11 13 May 211 Faculty of Mechanical Engineering in Kragujevac LUBRICATING ENGINE OILS FOR SPECIFIC

More information

Significance of Each Test. 1. Color (Visual)

Significance of Each Test. 1. Color (Visual) Significance of Each Test 1. Color (Visual) Determine the color of lubricant product by assessing the appearance of transmitted light appearance and intensity, as compare with a standard. Color alone is

More information

CITY OF PORTSMOUTH PURCHASING DEPARTMENT PORTSMOUTH, NEW HAMPSHIRE. Annual Fuel Bid - #01-18 INVITATION TO BID

CITY OF PORTSMOUTH PURCHASING DEPARTMENT PORTSMOUTH, NEW HAMPSHIRE. Annual Fuel Bid - #01-18 INVITATION TO BID CITY OF PORTSMOUTH PURCHASING DEPARTMENT PORTSMOUTH, NEW HAMPSHIRE Annual Fuel Bid - #01-18 INVITATION TO BID The City of Portsmouth is soliciting bids for our primary supply and emergency supply of fuel.

More information

Handbuch für installation, betrieb und wartung Planetengetriebe

Handbuch für installation, betrieb und wartung Planetengetriebe Italy Headquarters Installation, use and maintenance manual Manuale Installazione Uso e Manutenzione Riduttori Epicicloidali Installation, Operation and Service Manual Handbuch für installation, betrieb

More information

OIL ANALYSIS PROGRAMME OVERVIEW LUBEWATCH LUBEWATCH RUN BETTER LONGER OIL ANALYSIS CAN HELP YOU

OIL ANALYSIS PROGRAMME OVERVIEW LUBEWATCH LUBEWATCH RUN BETTER LONGER OIL ANALYSIS CAN HELP YOU OIL ANALYSIS PROGRAMME OVERVIEW LUBEWATCH LUBEWATCH OIL ANALYSIS CAN HELP YOU RUN BETTER LONGER texaco-lubricants.com/lubewatch Increased productivity and optimal equipment performance LubeWatch oil analysis

More information

TABLE OF CONTENTS. Shaft Mounted Planetgear Speed Reducer Owners Manual Type SMP Size Hercules (Page 1 of 21)

TABLE OF CONTENTS. Shaft Mounted Planetgear Speed Reducer Owners Manual Type SMP Size Hercules (Page 1 of 21) Type SMP Size Hercules (Page 1 of 21) TABLE OF CONTENTS Section I Introduction Basic Operation and Design...2 Sectional View and Component Identification...2 Nameplate Information....3 Section II Installation

More information

BEL-RAY MOTOR OIL. Exclusive Bel-Ray anti-wear chemistry reduces bearing and valve train wear and keeps pistons and rings from scuffing

BEL-RAY MOTOR OIL. Exclusive Bel-Ray anti-wear chemistry reduces bearing and valve train wear and keeps pistons and rings from scuffing V-Twin Synthetic Motor Oil BEL-RAY MOTOR OIL Exclusive Bel-Ray anti-wear chemistry reduces bearing and valve train wear and and keeps pistons and rings from scuffing Features high polarity synthetic base

More information

Oxidation Loss of additive effectiveness Dispersancy, Corrosion, Wear Permanent viscosity drop in multi - grade oils

Oxidation Loss of additive effectiveness Dispersancy, Corrosion, Wear Permanent viscosity drop in multi - grade oils Used oil analysis is comparable to a medical analysis with a blood test. Like blood, lubricating oil contains a good deal of information about the envelope in which it circulates. Wear of metallic parts,

More information

15W40 CH4/SJ. For all naturally aspirated and heavy duty turbocharged and intercooler diesel engines.

15W40 CH4/SJ. For all naturally aspirated and heavy duty turbocharged and intercooler diesel engines. 15W40 CH4/SJ : This oil is a high performance, dedicated heavy duty engine lubricant designed for use in modern high speed turbocharged diesel engines. It uses an exclusive additive formulation in conjunction

More information

TABLE OF CONTENTS. Shaft-Mounted Planetgear Speed Reducer Owners Manual Type SMP Size Jupiter (Page 1 of 23)

TABLE OF CONTENTS. Shaft-Mounted Planetgear Speed Reducer Owners Manual Type SMP Size Jupiter (Page 1 of 23) Type SMP Size Jupiter (Page 1 of 23) TABLE OF CONTENTS Section I Introduction Basic Operation and Design... 2 Sectional View and Component Identification... 2 Nameplate Information... 3 Section II Installation

More information

stationary gas engine oils high performance, high efficiency lubricants for stationary gas engines

stationary gas engine oils high performance, high efficiency lubricants for stationary gas engines stationary gas engine oils high performance, high efficiency lubricants for stationary gas engines Q8 Mahler Productivity and Reli 20 18 16 Oxidation Control The thin oil film separating the liner from

More information

Addendum to the Assembly and Operating Instructions

Addendum to the Assembly and Operating Instructions Drive Technology \ Drive Automation \ System Integration \ Services *2276652_1216* Addendum to the Assembly and Operating Instructions Industrial Gear Units X.. Series Helical and Bevel-Helical Gear Units

More information

Non-Varnishing PAG-based Turbine Fluid and GEK Spec 32568h Recommendations. Govind Khemchandani, Ph. D. The Dow Chemical Company Freeport, TX, USA

Non-Varnishing PAG-based Turbine Fluid and GEK Spec 32568h Recommendations. Govind Khemchandani, Ph. D. The Dow Chemical Company Freeport, TX, USA Non-Varnishing PAG-based Turbine Fluid and GEK Spec 32568h Recommendations Govind Khemchandani, Ph. D. The Dow Chemical Company Freeport, TX, USA STLE May 18-22, 2014, Florida Dow.com Presentation Objectives

More information

Installation, Maintenance and

Installation, Maintenance and Installation, Maintenance and Lubrication Chapter 3 Table of Contents Safety Notification 3 2 Installation 3 3 Mounting Positions 3 4 Starting Up 3 4 Inspection and Maintenance 3 4 Lubrication 3 5 Filler

More information

VECTON with System Pro Technology TM

VECTON with System Pro Technology TM Spotlight on: VECTON with System Pro Technology TM New engines bring new challenges for your oil VECTON can give you confidence to take on these challenges System Pro Technology means longer useful oil

More information

Hancock County Public Schools 83 STATE ROUTE 3543 HAWESVILLE, KENTUCKY PHONE (270) FAX (270)

Hancock County Public Schools 83 STATE ROUTE 3543 HAWESVILLE, KENTUCKY PHONE (270) FAX (270) Superintendent KYLE ESTES Hancock County Public Schools 83 STATE ROUTE 3543 HAWESVILLE, KENTUCKY 42348 PHONE (270) 927-6914 FAX (270) 927-6916 INVITATION TO BID GASOLINE / DIESEL FUEL 2016-2017 Board of

More information

AW 46 HYDRAULIC OIL PDF

AW 46 HYDRAULIC OIL PDF AW 46 HYDRAULIC OIL PDF ==> Download: AW 46 HYDRAULIC OIL PDF AW 46 HYDRAULIC OIL PDF - Are you searching for Aw 46 Hydraulic Oil Books? Now, you will be happy that at this time Aw 46 Hydraulic Oil PDF

More information

Mobil DTE 10 Excel Series

Mobil DTE 10 Excel Series Mobil DTE 10 Excel Series Premium Quality Hydraulic Oils Product Description Mobil DTE 10 Excel Series are high performance anti-wear hydraulic oils specifically designed to meet the needs of modern, high

More information

NGEO REVIEW Ray Sparling, Technical Support. January 20, 2016

NGEO REVIEW Ray Sparling, Technical Support. January 20, 2016 NGEO REVIEW Ray Sparling, Technical Support January 20, 2016 Agenda Natural Gas Stationary Engines Types/Applications Vehicular Engines Types/Applications OEMs and Approvals Summary Open Discussion Stationary

More information

NMRV - MCV - NRV NMRV+NMRV PC+NMRV

NMRV - MCV - NRV NMRV+NMRV PC+NMRV MAINTENANCE AND OPERATING INSTRUCTIONS FOR WORM GEAR REDUCERS AND GEARMOTORS SERIES: NMRV - MCV - NRV NMRV+NMRV PC+NMRV GB NMRV-UM-9 99/01 rev.15.07.99 2 Warehouse storage When moving the unit, care should

More information

COMPRESSOR OILS HYCOM VDL T 32, 46, 68, 100, 150, 220, 320

COMPRESSOR OILS HYCOM VDL T 32, 46, 68, 100, 150, 220, 320 COMPRESSOR OILS HYCOM VDL T 32, 46, 68, 100, 150, 220, 320 Special Features: It is specially blended from saturated paraffinic Group II base stocks and selected premium grade of antioxidants, anti-rust,

More information

Service Bulletin Trucks

Service Bulletin Trucks Volvo Trucks North America, Inc. Greensboro, NC USA This Service Bulletin replaces Service Bulletin 175-61, Approved Oils, Volvo Components, (12.2002), publication no. PV776 TSP183470. Service Bulletin

More information

E/ECE/324/Rev.2/Add.119/Amend.1 E/ECE/TRANS/505/Rev.2/Add.119/Amend.1

E/ECE/324/Rev.2/Add.119/Amend.1 E/ECE/TRANS/505/Rev.2/Add.119/Amend.1 23 May 2012 Agreement Concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions for

More information

Mobilgear 600 XP Series

Mobilgear 600 XP Series PrintFind a PDSFind a MSDS Mobilgear Series Gear Oil Product Description The Mobilgear Series are extra high performance gear oils having outstanding extreme pressure characteristics and load-carrying

More information

: 20 O : , I SO.

: 20 O : , I SO. O 00 7 IS 90 01 : 20 15, IS O 1 4 0 0 1 : 2 0 1 5, I SO :2 01 180 www.massoil-eg.com Marine Cylinder Lubricant (OMCL) Marine Cylinder Oil specially formulated for modern Low Speed 2-stroke Marine Diesel

More information

THIS SYMBOL MEANS A WARNING OR CRITICAL INFORMATION. THIS SYMBOL IS USED TO LIST ADDITIONAL INFORMATION AND TIPS.

THIS SYMBOL MEANS A WARNING OR CRITICAL INFORMATION. THIS SYMBOL IS USED TO LIST ADDITIONAL INFORMATION AND TIPS. THIS SYMBOL MEANS A WARNING OR CRITICAL INFORMATION. THIS SYMBOL IS USED TO LIST ADDITIONAL INFORMATION AND TIPS. PLEASE READ AND OBSERVE ALL THE INFORMATION IN THIS MANUAL. FAILURE TO COMPLY WITH THE

More information

Powershift transmissions, type EcoLife, for buses List of lubricants TE-ML 20. Table of contents

Powershift transmissions, type EcoLife, for buses List of lubricants TE-ML 20. Table of contents Commercial Vehicle Technology Powershift transmissions, type EcoLife, for buses List of lubricants TE-ML 20 Table of contents Page 1. Vehicle classification... 1 2. Approved lubricant classes for EcoLife...1

More information

5 Lubrication, Cooling, and Heating

5 Lubrication, Cooling, and Heating Lubrication,, and Heating Overview of the and cooling types Lubrication,, and Heating.1 Overview of the and cooling types The following combinations of and cooling types are possible. Lubrication Splash

More information

Q10. What are the payment terms? A10. Payment terms vary per participating agency. Refer to Page 16 of bid document.

Q10. What are the payment terms? A10. Payment terms vary per participating agency. Refer to Page 16 of bid document. June 22, 2017 ADDENDUM #1 BL061-17 Purchase of Gasoline and Diesel Fuel on an Annual Contract Please see questions, answers, and clarifications to the abovementioned bid. Q1. Are bonds required? A1. No

More information

Seamer Lubrication. Suggestions, Requirements. & Specifications. By Pneumatic Scale Angelus

Seamer Lubrication. Suggestions, Requirements. & Specifications. By Pneumatic Scale Angelus Seamer Lubrication Suggestions, Requirements & Specifications By Pneumatic Scale Angelus CAUTION: Contact your lubricant suppliers to verify the compatibility of lubricant with paints and components on

More information

Certificate of Accreditation

Certificate of Accreditation Certificate of Accreditation ISO/IEC 17025:2005 Certificate Number L2264.03 Analysts, Inc. 2450 Hassell Road Hoffman Estates IL 60195 has met the requirements set forth in L-A-B s policies and procedures,

More information

INDUSTRIAL GEARBOX OILS PARTHAN EP

INDUSTRIAL GEARBOX OILS PARTHAN EP INDUSTRIAL GEARBOX OILS PARTHAN EP These are premium quality oils manufactured from high quality base stocks fortified with extreme pressure additives, antifoam, antirust and antioxidation agents, thereby

More information

PVI 60KW, PVI 82KW, PVI 95KW

PVI 60KW, PVI 82KW, PVI 95KW PVI 60KW PVI 82KW PVI 95KW WARRANTY MANUAL Commercial, Grid-Tied Photovoltaic Inverters 2008, Solectria Renewables LLC Subject to Change DOC-020099 rev 024 1 1 Product Warranty & RMA Policy Warranty Policy

More information

DIWA List of Approved Oils Oil Change Interval 120,000 km

DIWA List of Approved Oils Oil Change Interval 120,000 km List of Approved Oils Oil Change Interval 120,000 km 2017-08-23 H55.633646en, Protection class 0: open This list of approved oils is not applicable to North America VTI-DIWA-Service Bulletins 013 and 118

More information

RANDO HD 10, 22, 32, 46, 68, 100, 150, 220, 320

RANDO HD 10, 22, 32, 46, 68, 100, 150, 220, 320 RANDO HD 10, 22, 32, 46, 68, 100, 150, 220, 320 PRODUCT DESCRIPTION Rando HD oils are formulated with premium base oil technology and designed to give robust protection to hydraulic pumps in mobile and

More information

RENOSAFE FireProtect 46, 68 Fire resistant hydraulic fluid, based on new ester and additive technology, Type HFDU

RENOSAFE FireProtect 46, 68 Fire resistant hydraulic fluid, based on new ester and additive technology, Type HFDU Description RENOSAFE FireProtect products are fire resistant hydraulic fluids based on special synthetic esters. The selected organic ester base oils have highest purity and show high oxidation and thermal

More information

HAVOLINE FULL SYNTHETIC MULTI-VEHICLE ATF

HAVOLINE FULL SYNTHETIC MULTI-VEHICLE ATF HAVOLINE FULL SYNTHETIC MULTI-VEHICLE ATF PRODUCT DESCRIPTION Havoline Full Synthetic Multi-Vehicle ATF is a premium quality synthetic transmission fluid that is recommended for most modern 6+ speed automatic

More information

REQUEST FOR PRICE QUOTATION FOR Laser Toner Cartridges. DATE BIDS REQUESTED: June 24, 2009 WEDNESDAY 10:30 A.M BID # RETURN TO:

REQUEST FOR PRICE QUOTATION FOR Laser Toner Cartridges. DATE BIDS REQUESTED: June 24, 2009 WEDNESDAY 10:30 A.M BID # RETURN TO: REQUEST FOR PRICE QUOTATION FOR Laser Toner Cartridges DATE BIDS REQUESTED: June 24, 2009 WEDNESDAY 10:30 A.M BID #09-003 RETURN TO: DR. PAM BEST, INTERIM SUPERINTENDENT LOUISBURG UNIFIED SCHOOL DISTRICT

More information

Bunker Summit Greece. Monique Vermeire Athens. 10 May, 2007

Bunker Summit Greece. Monique Vermeire Athens. 10 May, 2007 Bunker Summit Greece Monique Vermeire Athens 10 May, 2007 Chevron 2005 Efficient engine operation in a world of changing fuel oil quality Driving factors influencing today s and future fuel oil quality

More information

#203SW Wind Turbine Oil ISO 220, 320, 460 and 680

#203SW Wind Turbine Oil ISO 220, 320, 460 and 680 #203SW Wind Turbine Oil ISO 220, 320, 460 and 680 Wind Turbine Oil is a para-synthetic extreme pressure gear lubricant that is designed for use in the lubrication of heavily loaded gears and rolling element

More information

Mobilgear 600 XP Series

Mobilgear 600 XP Series Mobilgear 600 XP Series Gear Oil Product Description The Mobilgear 600 XP Series are extra high performance gear oils having outstanding extreme pressur Mobilgear 600 XP Series is designed to stay ahead

More information

Mobil DTE 20 Series. Product description. Features and benefits. Applications. Hydraulic Oils

Mobil DTE 20 Series. Product description. Features and benefits. Applications. Hydraulic Oils Mobil DTE 20 Series Hydraulic Oils Product description Mobil DTE 20 Series oils are high performance anti-wear hydraulic oils. They meet the stringent requirements of hydraulic systems using high pressure,

More information

Tough times. New technologies, new regulations, new fuels. A simple solution in A complex environment

Tough times. New technologies, new regulations, new fuels. A simple solution in A complex environment TALUSIA OPTIMA A simple solution in A complex environment Tough times Ship operators are facing an ever more complex environment. New regulations, new technologies, and new fuels mean tougher operational

More information

PREMIUM QUALITY MOTORCYCLE OIL 4 T 5W-40 ( FULLY SYNTHETIC) API SL/CF

PREMIUM QUALITY MOTORCYCLE OIL 4 T 5W-40 ( FULLY SYNTHETIC) API SL/CF 4 T 5W-40 ( FULLY SYNTHETIC) API SL/CF MG Oil 4 T Fully Synthetic motorcycle oil is specifically developed for the stringent lubricating requirements of the more and more sophisticated modern 4-stroke

More information

Powershift transmissions, type EcoLife, for buses List of lubricants TE-ML 20. Table of contents

Powershift transmissions, type EcoLife, for buses List of lubricants TE-ML 20. Table of contents Commercial Vehicle Technology Powershift transmissions, type EcoLife, for buses List of lubricants TE-ML 20 Table of contents Page 1. Vehicle classification... 1 2. Approved lubricant classes for EcoLife...1

More information

Product Description. Features and Benefits. Mobilgear 600 XP Series. Mobil Industrial, Canada. Gear Oil

Product Description. Features and Benefits. Mobilgear 600 XP Series. Mobil Industrial, Canada. Gear Oil 600 XP Series Page 1 of 5 600 XP Series Mobil Industrial, Canada Gear Oil Product Description The 600 XP Series are extra high performance gear oils having outstanding extreme pressure characteristics

More information

Anglomoil Hydraulic BIO-FR was designed to replace anti-wear, mineral oil based hydraulic fluids used in applications where fire hazards exist.

Anglomoil Hydraulic BIO-FR was designed to replace anti-wear, mineral oil based hydraulic fluids used in applications where fire hazards exist. Product Description Anglomoil Hydraulic BIO-FR was designed to replace anti-wear, mineral oil based hydraulic fluids used in applications where fire hazards exist. Product Features & Benefits PRODUCT DATA

More information

Diesel Exhaust Fluid Certification Program Overview FEBRUARY 2009 REVISION 01

Diesel Exhaust Fluid Certification Program Overview FEBRUARY 2009 REVISION 01 Diesel Exhaust Fluid Certification Program Overview Foreword This overview describes the voluntary and is intended to explain to marketers how the API Diesel Exhaust Fluid Certification Mark is licensed

More information

Mobil Delvac 1300 Super

Mobil Delvac 1300 Super PrintFind a PDSFind a MSDS Mobil Delvac 1300 Super Extra High Performance Diesel Engine Oil Product Description Mobil Delvac 1300 Super 10W-30 and 15W-40 are extra high performance diesel engine oils that

More information

HALIFAX REGIONAL MUNICIPALITY (HRM) One (1) Loader Mounted Snow Blower TENDER # T Page 1

HALIFAX REGIONAL MUNICIPALITY (HRM) One (1) Loader Mounted Snow Blower TENDER # T Page 1 Page 1 TENDER OF: ADDRESS: CONTACT NAME: TELEPHONE: FAX #: GST REGISTRATION #: To furnish and deliver equipment in accordance with specifications annexed hereto. The undersigned bidder has carefully examined

More information

Technical Information

Technical Information CYCLO 6 5 Technical Information Technical Information Technical Information 5.1 CYCLO 6 Lubrication Cyclo are either Grease lubricated or Oil lubricated. Refer to pages 5.3 and 5.4 to determine the unit

More information