Annexes or Articles of Directive. Granted accreditation

Size: px
Start display at page:

Download "Annexes or Articles of Directive. Granted accreditation"

Transcription

1 No of NB Name and address of NB Directives Procedures/ /AVCP system Annexes or Articles of Directive Granted accreditation Schemes accreditation A c c e s s 1* / + Further is needed to assess (access +) End of validity date 89/686/EEC Personal protective Art.10 System for ensuring EC quality of production Art.11B by means of monitoring Art.11A EC quality control system for the final product 1a, 1b, /5/EC Radio and telecommunications terminal Internal production control + specific apparatus tests Technical construction file 1a, 1b, 3, /42/EEC Medical devices system Annex II EN ISO/IEC EVPU a.s. Trencianska NOVA DUBNICA 98/79/EC In vitro diagnostic medical devices system I EN ISO/IEC P-012: S-042: A /95/EC (ex- 73/23/EEC) Low voltage directive Report consequent on a challenge (Art 8) Opinion on a safeguard action (Art 9) Article 8 Article 9 EN a, 1b, 3, /108/EC Electromagnetic compatibility Evaluation of technical documentation EN 1a, 1b, EN ISO/IEC EN ISO/IEC a, 1b, EN ISO/IEC

2 1296 VÚTCH CHEMITEX, spol. s r.o. Rybníky /686/EEC Personal protective 2009/48/EC Safety of toys EC quality control system for the final product Art.10 Art.11A Article Schema 1b Schema 2 Schema 1b Schema 2 P-002: S-068: A- 89/686/EEC Personal protective Art.10 EC quality control system for the final product Art.11A /105/EC (ex- 87/404/EEC) Simple pressure vessels 93/42/EEC Medical devices system Article 10 Articles 12, 13 and 14 Annex II VÚZ Priemyselný inštitút SR Račianska Bratislava Internal manufacturing checks with monitoring of the final assessment EC unit verification Approval of permanent joining procedures European approval of materials with design examination and special surveillance of the final assessment EC design-examination - Module A1 - Module B - Module C1 - Module D1 - Module E1 - Module G - Module F? - Module H1 - Module H - Module E - Module D - Module B1 P-009: S-023: O-002: A Annex I, Approval of permanent joining personnel Approval of non-destructive testing personnel 17024? /95/EC (ex- 73/23/EEC) Low voltage directive Report consequent on a challenge (Art 8) Opinion on a safeguard action (Art 9) Article 8 Article

3 2009/142/EC (ex- 90/396/EEC) Appliances burning gaseous fuels by unit to type (guarantee of product quality) to type (guarantee of production quality) to type Annex II.1 Annex II.6 Annex II.4 Annex II.3 Annex II.2 Annex II , by unit, EC declaration of conformity to type, EC verification 92/42/EEC Hotwater boilers - Module E - Module C - Module D - Module B B, C 2009/105/EC (ex- 87/404/EEC) Simple pressure vessels Article 10 Articles 12, 13 and Technický skúšobný ústav Piešťany, š.p. Internal manufacturing checks with monitoring of the final assessment EC unit verification with design examination and special surveillance of the final assessment EC design-examination - Module A1 - Module B - Module C1 - Module D1 - Module E1 - Module G - Module F - Module H1 - Module H - Module E - Module D - Module B A1, B, B1, C1, F, G P-018: S-047: A- 2000/14/EC Noise emission in the environment by for use outdoors Internal control of production with assessment of technical documentation and periodical checking II I Internal control of production with assessment of technical documentation and periodical checking /95/EC (ex- 73/23/EEC) Low voltage directive Report consequent on a challenge (Art 8) Opinion on a safeguard action (Art 9) Article 8 Article /108/EC Electromagnetic compatibility Evaluation of technical documentation /48/EC Safety of toys Article

4 1301 Technický a skúšobný ústav stavebný, n. o. (TSÚS)? b P-016: S-045: A TÜV SÜD Slovakia, s.r.o. Jašíkova Bratislava 2009/105/EC (ex- 87/404/EEC) Simple pressure vessels Article 10 Articles 12, 13 and I-008: P-020: O-012: A- 95/16/EC Lifts Final inspection with random checking B A II Annex IX Annex X Annex XI Annex XII Annex XIII Internal manufacturing checks with monitoring of the final assessment EC unit verification Approval of permanent joining procedures European approval of materials with design examination and special surveillance of the final assessment EC design-examination Approval of permanent joining personnel -Module A1 -Module B -Module C1 -Module D1 -Module E1 -Module F -Module G -Module H1 -Module H -Module E -Module D -Module B

5 2000/9/EC Cableway installations designed to carry persons Product verification EC examination for assessment of conformity of subsystems -Module B -Module D -Module F -Module G -Module H /9/EC Equipment and protective systems intended for use in potentially explosive atmospheres - Module B - Module D - Module C I - Module E ? EN ISO/IEC subdelivery 2006/95/EC (ex- 73/23/EEC) Low voltage directive Report consequent on a challenge (Art 8) Opinion on a safeguard action (Art 9) Article 8 Article EN ISO/IEC EN ISO/IEC 2004/108/EC Electromagnetic compatibility Evaluation of technical documentation subdelivery assurance Full quality EN ISO/IEC EN ISO/IEC

6 1354 Technická inšpekcia, a.s. Trnavská cesta Bratislava 94/9/EC Equipment and protective systems intended for use in potentially explosive atmospheres I Annex IX (EN ) Schema 1b, 6 ( B, C1, B+D, B+E) P-019: I-001: A /105/EC (ex- 87/404/EEC) Simple pressure vessels Article 10 Articles 12, 13 and 14 (EN ) Schema : 1b; 3 (: B; C1) 2009/142/EC (ex- 90/396/EEC) Appliances burning gaseous fuels by unit Annex II /16/EC Lifts (for lifts and for safety components) (of lifts and of safety components) (for lifts) (for lifts and for safety components)) (for lifts) Final inspection (for lifts) with random checking (for safety components) Annex XIII B Annex X Annex XII Annex XIV Annex XI Annex IX A II (EN ) Schema 1b, 6 ( B, C1, B+D, B+E) Approval of permanent joining procedures Approval of permanent joining personnel Approval of non-destructive testing personnel Annex I,

7 2000/9/EC Cableway installations designed to carry persons EC examination for assessment of conformity of subsystems - Module B - Module D - Module F - Module G - Module H I (EN ) Schema 1b,6 (Modules B, C, B+D, B+E, B1+D) 2006/95/EC (ex- 73/23/EEC) Low voltage directive Report consequent on a challenge (Art 8) Opinion on a safeguard action (Art 9) Article 8 Article (EN ) Schema : 1b; schema: 6; (: B; H) 2010/35/EU Transportable pressure Conformity assessment activities Exceptional checks Intermediate inspections Periodic inspections Reassessment of conformity Annex I 1, II 1, and III 1 to Directive 2008/68/EC Annex I 1, II1 and III 1 to Directive 2008/68/EC Annex I 1, II 1 and III 1 to Directive 2008/68/EC Annex I 1, II 1 and III 1 to Directive 2008/68/EC to Directive 2010/35/EU (EN ) Annex I 1, II 1, and III 1 to Directive 2008/68/EC Annex I 1, II1 and III 1 to Directive 2008/68/EC Annex I 1, II 1 and III 1 to Directive 2008/68/EC Annex I 1, II 1 and III 1 to Directive 2008/68/EC to Directive 2010/35/EU 1355 Výskumný ústav spojov, n. o. Zvolenská cesta Banská Bystrica 99/5/EC Radio and telecommunications terminal 2004/108/EC Electromagnetic compatibility Internal production control + specific apparatus tests Technical construction file 17025? Evaluation of technical documentation 17025? S-120: A Výskumný ústav dopravný, a.s. (VÚD) Veľký diel 3323, Žilina 2008/57/EC Interoperability of the rail system within the Community (Recast) Approval of permanent joining procedures Approval of permanent joining personnel and suitability for use of interoperability constituents procedure for subsystems? EN P-001: I-038: S-026: A-

8 1395 KONŠTRUKTA DEFENCE, a.s. Prevádzka špeciálneho skúšobníctva Lieskovec Dubnica nad Váhom 93/15/EEC Explosives for civil uses 2007/23/EC Pyrotechnic articles verification quality assurance (only for category 4 fireworks) Annex II.1 - Module B Annex II.6 - Module G Annex II.2 - Module C Annex II.3 - Module D Annex II.4 - Module E Annex II.5 - Module F Annex II - Module B Annex II - Module C Annex II - Module D Unit Annex II - Module E Full Annex II - Module G Annex II - Module H P-021: S-077: A /23/EC (ex- 90/384/EEC) Nonautomatic weighing instruments EC declaration of type conformity (quarantee of production quality) EC unit verification Annex II.2 Annex II.3 Annex II.1 Annex II Slovenská legálna metrológia, n.o. (SLM) Hviezdoslavova Banská Bystrica 2004/22/EC Measuring Instruments Directive Declaration of conformity (DOC) based on internal production control plus product testing by a Notified Body Type-examination DOC to type based on quality assurance of the production process DOC based on quality assurance of the production process DOC to type based on quality assurance of final product inspection and testing DOC to type based on product verification DOC based on quality assurance of final product inspection and testing DOC based on product verification DOC based on unit verification DOC based on full quality assurance DOC based on full quality assurance plus design examination Annex A1 Annex B Annex D Annex D1 Annex E Annex E1 Annex F Annex F1 Annex G Annex H Annex H P-017: S-243 (KE): S-245 (BB,ZA): S-246 (BA,NR): A Výskumný ústav chemických vlákien, a. 2009/48/EC Safety of s. Svit Article 20 toys Štúrova Svit P-006: S-020: A-???

9 2009/23/EC (ex- 90/384/EEC) Nonautomatic weighing instruments EC declaration of type conformity (quarantee of production quality) EC unit verification Annex II.2 Annex II.3 Annex II Neakreditovaná Slovenský metrologický ústav (SMÚ) Karloveská Bratislava Declaration of conformity (DOC) based on internal production control plus product testing by a Notified Body Type-examination DOC to type based on quality assurance of the production process DOC based on quality assurance of the 2004/22/EC production process Measuring DOC to type based on quality assurance of Instruments Directive final product inspection and testing DOC based on quality assurance of final product inspection and testing DOC based on product verification DOC based on full quality assurance DOC based on full quality assurance plus design examination Annex A1 Annex B Annex D Annex D1 Annex E Annex E1 Annex F Annex F1 Annex G Annex H Annex H P-035: A /16/EC Lifts E.I.C. Engineering inspection company, s.r.o. Volgogradská 8921/ Prešov of lifts + safety components Final inspection (for lifts) (for lifts) to type with random checking (for safety components) Internal manufacturing checks with monitoring of the final assessment EC unit verification EC design-examination Conformity A,B Annex X Annex XI - Module A1 - Module B - Module C1 - Module G - Module B1 EN EN P-032: I-030: A /9/EC Cableway installations designed to carry persons - Module B - Module F - Module G EN 2171 ZEN-SERVIS, spol. s r. o. Lietavská Bratislava 2004/22/EC Declaration of conformity to type based on Measuring product verification Instruments Directive Annex F schema 1b, modul F P-034: K-080: A-??? EC International, a.s. Hraničná 18 93/42/EEC Medical devices 98/79/EC In vitro diagnostic medical devices system Annex II P-043: A-

10 Bratislava 98/79/EC In vitro diagnostic medical devices (full quality assurance system) (production quality assurance) I P-043: A VIPO, a.s. gen. Svobodu 1069/4 89/686/EEC Personal EC quality control system for the final product Art Partizánske protective Art.11A -? schema P-046: S-323: A-??? 2394 Bratislavská metrologická spoločnosť, s.r.o. Trnavská Bernolákovo 2004/22/EC Declaration of conformity to type based on Measuring product verification Instruments Directive Annex F + EN ISO/IEC A Prvá zváračská, a.s. Kopčianska Bratislava Approval of permanent joining personnel Annex I, Approval of non-destructive testing personnel Approval of permanent joining procedures schema ( ) ( ) P-041: S-308: A /105/EC (ex- 87/404/EEC) Simple pressure vessels Article 10 Articles 12, 13 and 14 schema 1b, ? KTS Reaktortest, s.r.o. Átriová Trnava Trnavská Bernolákovo Approval of non-destructive testing personnel Annex I, O A Notes: *This field of accreditation is responsible for EA-2/17 assessment KTS recognized by a competent third party (uznaná kompetentná tretia strana)

COUNCIL OF THE EUROPEAN UNION. Brussels, 11 December /3/06 REV 3 ADD 1. Interinstitutional File: 2003/ 0153(COD) ENT 84 CODEC 561

COUNCIL OF THE EUROPEAN UNION. Brussels, 11 December /3/06 REV 3 ADD 1. Interinstitutional File: 2003/ 0153(COD) ENT 84 CODEC 561 COUNCIL OF THE EUROPEAN UNION Brussels, 11 December 2006 Interinstitutional File: 2003/ 0153(COD) 9911/3/06 REV 3 ADD 1 T 84 CODEC 561 STATEMT OF THE COUNCIL'S REASONS Subject : Common Position adopted

More information

Inspection field Inspection type and scope Inspection procedure. New and operated equipment according to ADR/RID/IMDG/CSC

Inspection field Inspection type and scope Inspection procedure. New and operated equipment according to ADR/RID/IMDG/CSC Locations: 1 Management 2 Workplace Praha 3 Workplace Plzeň Zikmunda Wintra 21, 320 16 Plzeň 4 Workplace Ústí nad Labem Malátova 14, 400 11 Ústí nad Labem 5 Workplace Brno třída Kpt. Jaroše 25, 602 00

More information

Annex of the Certificate (Page 1/5) Scope of Accreditation

Annex of the Certificate (Page 1/5) Scope of Accreditation Annex of the Certificate (Page 1/5) As a "Type A" Inspection Body Address : Esas Maltepe Ofispark Altayçeşme Mah. Çamlı Sokak No:21 Kat:8 Maltepe 34843 İSTANBUL/TÜRKİYE Phone : +90 216 518 40 50 Fax :

More information

Annex of the Certificate (Page 1/4) Scope of Accreditation

Annex of the Certificate (Page 1/4) Scope of Accreditation Annex of the Certificate (Page 1/4) As a "Type A" Inspection Body Address : Keresteciler Sitesi E Blok No:5 Kat:2 Ostim / Yenimahalle 06170 ANKARA/TÜRKİYE Phone : +90 312 385 95 30 Fax : +90 312 386 00

More information

IECEx Certificate of Conformity

IECEx Certificate of Conformity IECEx Certificate of Conformity Certificate No.: IECEx TUN 04.0006X Date of Issue: 2012-06-12 Issue No.: 3 Page 2 of 4 Manufacturer: FAFNIR GmbH Bahrenfelder Straße 19 22765 Hamburg Germany Manufacturing

More information

SYLLABUS. EASA 748/2012 Part-21 SUBPART F/G POA - ADVANCED (FLY Course code: 004-C-P) Issue of FLY EN

SYLLABUS. EASA 748/2012 Part-21 SUBPART F/G POA - ADVANCED (FLY Course code: 004-C-P) Issue of FLY EN SYLLABUS EASA 748/2012 Part-21 SUBPART F/G (FLY Course code: 004-C-P) Introduction During this course Participants will learn and revise the regulations and requirements according to EASA Part 21. Summary

More information

IECEx Certificate of Conformity

IECEx Certificate of Conformity IECEx Certificate of Conformity Certificate No.: IECEx TUN 04.0006X Date of Issue: 2014-04-01 Issue No.: 4 Page 2 of 4 Manufacturer: FAFNIR GmbH Bahrenfelder Straße 19 22765 Hamburg Additional Manufacturing

More information

The new EU type-approval framework for motor vehicles

The new EU type-approval framework for motor vehicles AC.nl The new EU type-approval framework for motor vehicles Commission Proposal Explained 24 May 2016 Directorate-General for Internal Market, Industry, Entrepreneurship and SMEs Automotive and Mobility

More information

Chain-saws (combustion engine powered)

Chain-saws (combustion engine powered) Compliance Guide Rev.4.2, Edition 04/2018 Chain-saws (combustion engine powered) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels, Belgium secretariat@egmf.org +32 2 206 68 66 This

More information

COMMISSION REGULATION (EU) / of XXX

COMMISSION REGULATION (EU) / of XXX EUROPEAN COMMISSION Brussels, XXX xxx [ ](2016) XXX draft COMMISSION REGULATION (EU) / of XXX correcting Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No

More information

Tillers Motor hoes (combustion engine powered)

Tillers Motor hoes (combustion engine powered) Compliance Guide Rev.2.1, Edition 04/2018 This guide is intended to help market surveillance authorities with the checking of conformity of combustion engine powered brush-cutters and grass trimmers in

More information

EUnited Municipal Equipment

EUnited Municipal Equipment Municipal Equipment European Association of Municipal Equipment Manufacturers A brief guide for identification of non-compliant refuse collection vehicles Is this refuse collection vehicle compliant with

More information

A brief guide for identification of non-compliant construction machinery. Is this. Compactor / Roller compliant with European legislation?

A brief guide for identification of non-compliant construction machinery. Is this. Compactor / Roller compliant with European legislation? A brief guide for identification of non-compliant construction machinery Is this Compactor / Roller compliant with European legislation? Introduction Construction equipment placed on the EU market for

More information

EU Declaration of conformity

EU Declaration of conformity EU Declaration of conformity Confirm with the Directive 2006/42/EC: of the European Parliament and of the Council of 17 May 2006 on the approximation of the laws of the Member States relating to machinery

More information

Solar Expansion Vessels

Solar Expansion Vessels Installation and Maintenance Instructions Solar Expansion Vessels EN v 2.1-1 - 1. General Information Expansion vessels with either fi xed or exchangeable membrane made by VAREM S.p.a. meet the requirements

More information

EU-Mexico Free Trade Agreement EU TEXTUAL PROPOSAL

EU-Mexico Free Trade Agreement EU TEXTUAL PROPOSAL This document contains an EU proposal for a legal text on an annex on motor vehicles and equipment and parts thereof to the Trade in Goods chapter in the Trade Part of a possible modernised EU-Mexico Association

More information

Ride-on lawnmowers (combustion engine powered)

Ride-on lawnmowers (combustion engine powered) Compliance Guide Rev.2.3 Edition 04/2018 Ride-on lawnmowers (combustion engine powered) This guide is intended to help market surveillance authorities with the checking of conformity of combustion engine

More information

EU Mutual Recognition Technical Requirements

EU Mutual Recognition Technical Requirements 1. PRODUCT DESCRIPTION... 1 1.a General description of the product... 1 1.b Application limitations... 1 1.c Intended use... 2 1.d System context... 2 2. DESIGN EVALUATION... 2 2.a Engineering evaluation

More information

Carl Stuart Ltd. Tallaght Business Park, Whitestown, Dublin 24. Calibration Laboratory Registration number: 270C

Carl Stuart Ltd. Tallaght Business Park, Whitestown, Dublin 24. Calibration Laboratory Registration number: 270C Tallaght Business Park, Whitestown, Dublin 24 Calibration Laboratory Registration number: 270C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in the Schedule bearing

More information

Parts Certificate Certificate for a part of a measuring system for LOTW

Parts Certificate Certificate for a part of a measuring system for LOTW No. 107030 Wayne ixpay TX secure payment platform, a payment terminal (OPT) for cards Issued to Wayne Fueling Systems Sweden AB Hanögatan 10, SE-211 24 Malmö, Sweden In respect of (part of instrument)

More information

(Text with EEA relevance)

(Text with EEA relevance) L 150/10 COMMISSION REGULATION (EU) 2015/924 of 8 June 2015 amending Regulation (EU) No 321/2013 concerning the technical specification for interoperability relating to the rolling stock freight wagons

More information

COMMISSION REGULATION (EC)

COMMISSION REGULATION (EC) L 191/26 Official Journal of the European Union 23.7.2009 COMMISSION REGULATION (EC) No 640/2009 of 22 July 2009 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard

More information

RSB ROUNDTABLE ON SUSTAINABLE BIOMATERIALS RSB List of Documents and references. 18 January RSB reference code: RSB-DOC

RSB ROUNDTABLE ON SUSTAINABLE BIOMATERIALS RSB List of Documents and references. 18 January RSB reference code: RSB-DOC RSB ROUNDTABLE ON SUSTAINABLE BIOMATERIALS RSB List of Documents and references 18 January 2019 RSB reference code: RSB-DOC-10-001 Published by the Roundtable on Sustainable Biomaterials. This publication

More information

RSB List of Documents and references

RSB List of Documents and references Type of document: Reference Document Date: 20 March 2017 RSB List of Documents and references RSB reference code: [RSB-DOC-10-001] Published by the Roundtable on Sustainable Biomaterials. This publication

More information

Hedge trimmers (combustion engine powered)

Hedge trimmers (combustion engine powered) Compliance Guide Rev.2.1 Edition 04/2018 Hedge trimmers (combustion engine powered) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels, Belgium secretariat@egmf.org +32 2 706 82 37 This

More information

English version of. Executive Order on vehicles' technical compatibility with the rail network (Bekendtgørelse nr af 30. november 2012) Preface

English version of. Executive Order on vehicles' technical compatibility with the rail network (Bekendtgørelse nr af 30. november 2012) Preface English version of Executive Order on vehicles' technical compatibility with the rail network (Bekendtgørelse nr. 1127 af 30. november 2012) Preface Please note that the English version is for informational

More information

EUROPEAN UNION AGENCY FOR RAILWAYS Annex 1 006REC1025 V 1.0

EUROPEAN UNION AGENCY FOR RAILWAYS Annex 1 006REC1025 V 1.0 Annex 1: Amendments to the technical specification for interoperability relating to the rolling stock locomotives and passenger rolling stock subsystem of the rail system in the European Union (Annex to

More information

Automatic Pressure Calibrator. 3-Year Limited Warranty. See the Users Manual for the full warranty.

Automatic Pressure Calibrator. 3-Year Limited Warranty. See the Users Manual for the full warranty. 729/729 FC Automatic Pressure Calibrator Safety Information 3-Year Limited Warranty. See the Users Manual for the full warranty. Go to Fluke's website at www.fluke.com to read the User Manual and find

More information

COMMISSION REGULATION (EU) / of XXX

COMMISSION REGULATION (EU) / of XXX EUROPEAN COMMISSION Brussels, XXX [ ](2017) XXX draft COMMISSION REGULATION (EU) / of XXX implementing Regulation (EU) No 595/2009 of the European Parliament and of the Council as regards the determination

More information

Principle Decision by the Central Experience Exchange Circle of the Notified Bodies and the GS Bodies according to the Product Safety Act ZEK

Principle Decision by the Central Experience Exchange Circle of the Notified Bodies and the GS Bodies according to the Product Safety Act ZEK -GB-2017-01: Defining the requirements for a GS mark approval Principle Decision by the Central Experience Exchange Circle of the Notified Bodies and the GS Bodies according to the Product Safety Act about

More information

WELMEC External Auxiliary Power Supply of Electrical Energy Meters

WELMEC External Auxiliary Power Supply of Electrical Energy Meters WELMEC 11.8 2018 External Auxiliary of Electrical Energy Meters WELMEC is a cooperation between the legal metrology authorities of the Member States of the European Union and EFTA. This document is one

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11109-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 13.06.2018 to 22.06.2020 Holder of certificate: TÜV

More information

QUESTION / CLARIFICATION

QUESTION / CLARIFICATION QUESTION / CLARIFICATION CO-ORDINATION BETWEEN NOTIFIED BODIES INTEROPERABILITY DIRECTIVE AND SUBSEQUENT AMENDMENTS ON THE INTEROPERABILITY OF THE RAIL SYSTEM WITHIN THE UNION QC-RST-020 Issue 02 Date:

More information

Evaluation Certificate

Evaluation Certificate SC0414-14 Certificate for a part of a measuring system for LOTW Forecourt controller, FuelNet Manager Issued to CODAB AB Höjdrodergatan 24, SE-212 39 Malmö, Sweden In respect of (part of instrument) Forecourt

More information

EC-TYPE EXAMINATION CERTIFICATE (MODULE B)

EC-TYPE EXAMINATION CERTIFICATE (MODULE B) EC-TYPE EXAMINATION CERTIFICATE (MODULE B) Certificate No: MEDB000025U Revision No: 1 Application of: Directive 2014/90/EU of 23 July 2014 on marine equipment (MED), issued as "Forskrift om Skipsutstyr"

More information

ANNEX MOTOR VEHICLES AND MOTOR VEHICLES' PARTS. Article 1. General Provisions

ANNEX MOTOR VEHICLES AND MOTOR VEHICLES' PARTS. Article 1. General Provisions ANNEX MOTOR VEHICLES AND MOTOR VEHICLES' PARTS Article 1 General Provisions 1. This Annex shall apply to motor vehicles in UNECE vehicle regulations' category M1 as well as parts and equipment regulated

More information

Irving Oil Whitegate Refinery Limited

Irving Oil Whitegate Refinery Limited Irving Oil Whitegate Refinery Limited Whitegate, Midleton, Co. Cork Testing Laboratory Registration number: 258T is accredited by the Irish National Board (INAB) to undertake testing as detailed in the

More information

COMMISSION REGULATION (EU) / of XXX

COMMISSION REGULATION (EU) / of XXX EUROPEAN COMMISSION Brussels, XXX [ ](2018) XXX draft COMMISSION REGULATION (EU) / of XXX amending Regulation (EU) 2017/2400 and Directive 2007/46/EC of the European Parliament and of the Council as regards

More information

ANNEX MOTOR VEHICLES AND EQUIPMENT AND PARTS THEREOF. Article 1. Definitions

ANNEX MOTOR VEHICLES AND EQUIPMENT AND PARTS THEREOF. Article 1. Definitions ANNEX MOTOR VEHICLES AND EQUIPMENT AND PARTS THEREOF Article 1 Definitions 1. For the purpose of this Annex, the following definitions apply: (a) WP.29 means the World Forum for Harmonisation of Vehicle

More information

for TECHNICAL ADVICE OF THE EUROPEAN UNION AGENCY FOR RAILWAYS THE EUROPEAN COMMISSION regarding ERA/AD V/ running gear - design of structural

for TECHNICAL ADVICE OF THE EUROPEAN UNION AGENCY FOR RAILWAYS THE EUROPEAN COMMISSION regarding ERA/AD V/ running gear - design of structural EUROPEAN UNION AGENCY FOR RAILWAYS Making the railway system work better for society. TECHNICAL ADVICE ERA/AD V/201 72 OF THE for THE EUROPEAN COMMISSION regarding Interoperability Constituent bogie frame

More information

ULTRASONIC FLOW SENSOR QALCOSONIC FLOW 2

ULTRASONIC FLOW SENSOR QALCOSONIC FLOW 2 AB AXIS INDUSTRIES ULTRASONIC FLOW SENSOR QALCOSONIC FLOW 2 TECHNICAL DESCRIPTION, INSTALLATION AND USER INSTRUCTIONS PESF2V01 KAUNAS Contents Page SAFETY INFORMATION... 1. APPLICATION FIELD... 2. TECHNICAL

More information

Version / Status V 2.0 Date Author. Wagon Markings

Version / Status V 2.0 Date Author. Wagon Markings 1. Introduction Wagon Markings Article 4, para 4 of the Safety Directive (2004/49/EG amended by 2008/110/EC) stipulates the responsibility of each manufacturer, maintenance supplier, wagon keeper, service

More information

EU TOY DIRECTIVE 2009/48/EC: OVERVIEW - REGULATORY CONTEXT AND MAJOR CHANGES

EU TOY DIRECTIVE 2009/48/EC: OVERVIEW - REGULATORY CONTEXT AND MAJOR CHANGES EU TOY DIRECTIVE 2009/48/EC: OVERVIEW - REGULATORY CONTEXT AND MAJOR The EU Toy Directive was revised in order to take into account the new technological developments and increasing child safety requirements.

More information

Ex m Solenoid Operator Type 0519

Ex m Solenoid Operator Type 0519 nass magnet GmbH Eckenerstrasse 4-6 D-30179 Hannover Doc. No. 113-720-0002 Revision No. 2 01.06.2015 Ex m Solenoid Operator Type 0519 Operating Instructions Dear Customer! To ensure the function and for

More information

FOR INTERNAL WORKING PURPOSES ONLY Version 7.2 (04/06/2012)

FOR INTERNAL WORKING PURPOSES ONLY Version 7.2 (04/06/2012) Compromise cell in green Note: Differences between IMCO's position and the Commission's proposal are highlighted in Bold/italics. Differences between the Council's position and the Commission's proposal

More information

This document is meant purely as a documentation tool and the institutions do not assume any liability for its contents

This document is meant purely as a documentation tool and the institutions do not assume any liability for its contents 1970L0156 EN 12.07.2007 025.001 1 This document is meant purely as a documentation tool and the institutions do not assume any liability for its contents B COUNCIL DIRECTIVE of 6 February 1970 on the approximation

More information

KKAI Report No Rev 1 Prepared for BioHeatUSA April 28, 2009

KKAI Report No Rev 1 Prepared for BioHeatUSA April 28, 2009 1. Summary... 3 2. Background... 3 3. Scope... 3 4. European Suppliers... 4 5. Materials... 4 6. Design... 4 7. Fabrication... 5 8. Examination... 6 9. Inspection... 6 10. Testing... 8 11. Quality Control

More information

COMMISSION RECOMMENDATION. of XXX

COMMISSION RECOMMENDATION. of XXX EUROPEAN COMMISSION Brussels, XXX [ ](2017) XXX draft COMMISSION RECOMMENDATION of XXX on the use of fuel consumption and CO 2 emission values type-approved and measured in accordance with the World Harmonised

More information

EUROPEAN COMMISSION DIRECTORATE-GENERAL TAXATION AND CUSTOMS UNION Customs Policy, Legislation, Tariff Customs Legislation TRANSIT MANUAL AMENDMENT

EUROPEAN COMMISSION DIRECTORATE-GENERAL TAXATION AND CUSTOMS UNION Customs Policy, Legislation, Tariff Customs Legislation TRANSIT MANUAL AMENDMENT EUROPEAN COMMISSION DIRECTORATE-GENERAL TAXATION AND CUSTOMS UNION Customs Policy, Legislation, Tariff Customs Legislation Brussels, 28 February 2018 TAXUD/A2/15/2017/final TRANSIT MANUAL AMENDMENT Use

More information

Official Journal of the European Union

Official Journal of the European Union L 214/18 26.8.2003 DIRECTIVE 2003/44/EC OF THE EUROPEAN PARLIAMT AND OF THE COUNCIL of 16 June 2003 amending Directive 94/25/EC on the approximation of the laws, regulations and administrative provisions

More information

Information for the Certification of Weld Shops in Rail Vehicle Construction According to DIN EN

Information for the Certification of Weld Shops in Rail Vehicle Construction According to DIN EN Information for the Certification of Weld Shops in Rail Vehicle Construction According to DIN EN 15085-2 Certificate According DIN EN 15085-2 Railway applications - Welding of railway vehicles and components

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-12095-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2015-07-16 to 2019-03-06 Holder of certificate: Weidmüller

More information

INFORMATIVE TRANSLATION OF EXECUTIVE ORDER no 1465, DATED 5 DECEMBER 2016

INFORMATIVE TRANSLATION OF EXECUTIVE ORDER no 1465, DATED 5 DECEMBER 2016 INFORMATIVE TRANSLATION OF EXECUTIVE ORDER no 1465, DATED 5 DECEMBER 2016 Please note that this English version is for informational purposes only. Where the wording in the Danish and English versions

More information

Informal document No. 2

Informal document No. 2 Informal document No. 2 Distr.: General 9 October 2017 Original: English Economic Commission for Europe Inland Transport Committee Working Party on Road Transport Group of Experts on European Agreement

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11321-02-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.12.2016 to 19.12.2021 Holder of certificate: TÜV

More information

HyLAW. HyDrail Rail Applications Assessment. Main Author(s): [Dainis Bošs, Latvian Hydrogen association] Contributor(s):

HyLAW. HyDrail Rail Applications Assessment. Main Author(s): [Dainis Bošs, Latvian Hydrogen association] Contributor(s): HyLAW HyDrail Rail Applications Assessment Main Author(s): [Dainis Bošs, Latvian Hydrogen association] Contributor(s): Status: [V1] Dissemination level: [public] 1 Acknowledgments: The HyLAW project has

More information

DECLARATION OF CONFORMITY FOR THE MEDICAL DEVICE FAMILY OUTLETS FOR COMPRESSED MEDICAL GASES AND VACUUM AND FOR ANAESTHETIC GAS SCAVENGING SYSTEMS

DECLARATION OF CONFORMITY FOR THE MEDICAL DEVICE FAMILY OUTLETS FOR COMPRESSED MEDICAL GASES AND VACUUM AND FOR ANAESTHETIC GAS SCAVENGING SYSTEMS DECLARATION OF CONFORMITY FOR THE MEDICAL DEVICE FAMILY OUTLETS FOR COMPRESSED MEDICAL GASES AND VACUUM AND FOR ANAESTHETIC GAS SCAVENGING SYSTEMS whose codes are specified in the attachment, to the essential

More information

COMMISSION REGULATION (EU) / of XXX

COMMISSION REGULATION (EU) / of XXX Ref. Ares(2018)1297632-08/03/2018 EUROPEAN COMMISSION Brussels, XXX [ ](2017) XXX draft COMMISSION REGULATION (EU) / of XXX amending Directive 2007/46/EC, Commission Regulation (EC) No 692/2008 and Commission

More information

Council of the European Union Brussels, 18 July 2014 (OR. en)

Council of the European Union Brussels, 18 July 2014 (OR. en) Council of the European Union Brussels, 18 July 2014 (OR. en) 11932/14 ADD 1 TRANS 367 COVER NOTE From: European Commission date of receipt: 9 July 2014 To: General Secretariat of the Council No. Cion

More information

SAFETY PRODUCTS. ASK-Series Safety Mat Product Manual

SAFETY PRODUCTS. ASK-Series Safety Mat Product Manual SAFETY PRODUCTS ASK-Series Safety Mat Product Manual 2TLC010047M0201_D ORIGINAL INSTRUCTIONS Read and understand this document Please read and understand this document before using the products. Please

More information

E/ECE/324/Rev.2/Add.104/Rev.2 E/ECE/TRANS/505/Rev.2/Add.104/Rev.2

E/ECE/324/Rev.2/Add.104/Rev.2 E/ECE/TRANS/505/Rev.2/Add.104/Rev.2 28 September 2011 Agreement Concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions

More information

DEPARTMENT OF TRADE AND INDUSTRY NO APRIL 2016

DEPARTMENT OF TRADE AND INDUSTRY NO APRIL 2016 Trade and Industry, Department of/ Handel en Nywerheid, Departement van 438 National Regulator for Compulsory Specifications Act (5/2008): Amendments to the Compulsory Specification for Earth Leakage Protection

More information

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 18438 02 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.03.2014 to 10.03.2019 Holder of certificate: Jürgen

More information

QUESTION / CLARIFICATION QC-ENE-001

QUESTION / CLARIFICATION QC-ENE-001 QUESTION / CLARIFICATION QC-ENE-001 CO-ORDINATION BETWEEN NOTIFIED BODIES DIRECTIVES 96/48/EC AND 2001/16/EC ON THE INTEROPERABILITY OF THE TRANS-EUROPEAN HIGH-SPEED AND CONVENTIONAL RAILWAY SYSTEMS Issue

More information

Inspection Services Design Appraisal Document

Inspection Services Design Appraisal Document Issue Number: 1 Page 1 of 5 Client : Groth Corporation Subject : Pressure / Vacuum Relief Valves Model Series 1200, 1300, 1400, 1600, 1700 & 1800 Pressure Equipment Type : Safety Accessory PED Category

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELITE ELECTRONIC ENGINEERING, INC. 1 1516 Centre Circle Downers Grove, IL 60515 Larry Brooks (QA Manager) Phone: 630 495 9770 ext. 166 Email: lbrooks@elitetest.com

More information

KPS LPG Pipe System. Making fuel flow safely.

KPS LPG Pipe System. Making fuel flow safely. KPS LPG Pipe System Making fuel flow safely www.opwglobal.com For retailers Long life expectancy The KPS LPG pipe is made of non-corroding polyethylene that has been used for petrol, gas and water piping

More information

Fast track to Sustainable Mobility. SNCF V350 CATENARY CERTIFICATION with respect to the TSI-ENE

Fast track to Sustainable Mobility. SNCF V350 CATENARY CERTIFICATION with respect to the TSI-ENE Fast track to Sustainable Mobility SNCF V350 CATENARY CERTIFICATION with respect to the TSI-ENE 1 The French Railway Network 3630 km of highspeed tracks 300 km at 270km/h 2730 km at 300km/h 600 km at 320km/h

More information

E/ECE/324/Rev.2/Add.102/Rev.1 E/ECE/TRANS/505/Rev.2/Add.102/Rev.1

E/ECE/324/Rev.2/Add.102/Rev.1 E/ECE/TRANS/505/Rev.2/Add.102/Rev.1 30 August 2011 Agreement Concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions for

More information

Reviewed: DD Month University Code of Practice for Electrical Safety. PART B - Design and Construction of Electrical Equipment within the University

Reviewed: DD Month University Code of Practice for Electrical Safety. PART B - Design and Construction of Electrical Equipment within the University Safety Office Reviewed: 17 July 2012 Reviewed: DD Month University Code of Practice for Electrical Safety PART B - Design and Construction of Electrical Equipment within the University The purpose of this

More information

FREQUENTLY ASKED QUESTIONS GUIDE FOR DIRECTIVE 2003/44/EC AMENDING DIRECTIVE 1994/25/EC RELATING TO RECREATIONAL CRAFT

FREQUENTLY ASKED QUESTIONS GUIDE FOR DIRECTIVE 2003/44/EC AMENDING DIRECTIVE 1994/25/EC RELATING TO RECREATIONAL CRAFT FREQUENTLY ASKED QUESTIONS GUIDE FOR DIRECTIVE 2003/44/EC AMENDING DIRECTIVE 1994/25/EC RELATING TO RECREATIONAL CRAFT CONTENTS Summary Page 3 Table of Questions Pages 5-6 FAQs - Answers Pages 7-21 List

More information

CEMA Representing the European Agricultural Machinery Industry. Dr. Heribert Reiter CEMA - Technical Board Chairman

CEMA Representing the European Agricultural Machinery Industry. Dr. Heribert Reiter CEMA - Technical Board Chairman CEMA Representing the European Agricultural Machinery Industry Dr. Heribert Reiter CEMA - Technical Board Chairman CEMA The European Association representing the Farm Machinery Industry in Europe for more

More information

Van Puijenbroek Texti& CE TYPE EXAMINATION CERTIFICATE Nr

Van Puijenbroek Texti& CE TYPE EXAMINATION CERTIFICATE Nr In application of the directive 89/686/EEG of 21 December 1989 concerning the harmonisation of the Member States legislation relative to personal protective equipment, Centexbel Notified body 0493 authorised

More information

Revision of Directive 2007/46/EC establishing a framework for the approval of motor vehicles and their trailers

Revision of Directive 2007/46/EC establishing a framework for the approval of motor vehicles and their trailers Revision of Directive 2007/46/EC establishing a framework for the approval of motor vehicles and their trailers Johan Renders Legislative Officer DG GROWTH Automotive and Mobility Industries Revision of

More information

Multi-Mover Charger for model L25

Multi-Mover Charger for model L25 Multi-Mover Charger for model L25 Important safety instruction. Keep these instructions. This manual contains important instructions for the safety of the user and the operation of the device. 1. SYMBOLS

More information

Official Journal of the European Union

Official Journal of the European Union 17.2.2015 L 41/55 COMMISSION IMPLEMTING DECISION (EU) 2015/253 of 16 February 2015 laying down the rules concerning the sampling and reporting under Council Directive 1999/32/EC as regards the sulphur

More information

BRL-K636/ Evaluation Guideline Kiwa product certificate for Overfill prevention devices for storage tanks for liquid petroleum fuels

BRL-K636/ Evaluation Guideline Kiwa product certificate for Overfill prevention devices for storage tanks for liquid petroleum fuels BRL-K636/03 2007-12-07 Evaluation Guideline Kiwa product certificate for Overfill prevention devices for storage tanks for liquid petroleum fuels BRL-K636/03 2007-12-07 Evaluation Guideline Kiwa product

More information

EStrong-series Emergency Stop

EStrong-series Emergency Stop Original instructions EStrong-series Emergency Stop ABB AB / Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please read and understand

More information

VIETNAM I. GENERAL INFORMATION RATIONALE FOR LEGAL METROLGY LEGISLATION REGULATORY BODY. Population Size million

VIETNAM I. GENERAL INFORMATION RATIONALE FOR LEGAL METROLGY LEGISLATION REGULATORY BODY. Population Size million VIETNAM I. GENERAL INFORMATION Population Size 86.5 million Domestic Trade per million population (in US$) Departmental Budget per million population (in US$) Staff Strength About 1200 personnel II. RATIONALE

More information

original operating manual Operating manual Translation of the Item-No.: ,

original operating manual Operating manual Translation of the Item-No.: , Translation of the original operating manual Operating manual Item-No.: 015 431 551, 015 431 581 Important! Copyright The operating manual is always to be read before commissioning the equipment. No warranty

More information

Test procedure/method identification

Test procedure/method identification Testing laboratory location: 1 NOV 2 UHE Úhelnice 41, 294 06 Úhelnice 3 BEZ Uno Technology Park, Hala H1a, Bezděčín č.p. 108, 293 01 Mladá Bolesla 4 VTP Přílepská 1920, 252 63 Roztoky u Prahy 5 KTG Bílý

More information

Draft COMMISSION DECISION

Draft COMMISSION DECISION EUROPEAN COMMISSION Brussels, xxx C(2010) yyy final Draft COMMISSION DECISION of [ ] on the request from the Kingdom of Spain for a derogation pursuant to Article 3(4) and (5) of Directive 98/70/EC as

More information

PROTECTION AND CONNECTION. Product environmental information Cable distribution cabinet, Kabeldon CDC

PROTECTION AND CONNECTION. Product environmental information Cable distribution cabinet, Kabeldon CDC PROTECTION AND CONNECTION Product environmental information Cable distribution cabinet, Kabeldon CDC Applicability This document covers the environmental information for the following products: Applicability

More information

532: 2006 Bicycle tube valves and valve tubing Specification (third revision) 2414: 2005 Cycle and rickshaw pneumatic tyres (fourth revision)

532: 2006 Bicycle tube valves and valve tubing Specification (third revision) 2414: 2005 Cycle and rickshaw pneumatic tyres (fourth revision) For BIS use only Draft Indian Standard CYCLE RUBBER TUBES (MOULDED/JOINTED) SPECIFICATION (fourth revision of IS 2415) Not to be reproduced without the permission Last date for receipt of comments is of

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELITE ELECTRONIC ENGINEERING, INC. 1 1516 Centre Circle Downers Grove, IL 60515 Stephen Laya (QA Manager) Phone: 630 495 9770 ext. 119 Email: sglaya@elitetest.com

More information

ATEX instruction APP S 674 pumps APP S , APP S and APP S

ATEX instruction APP S 674 pumps APP S , APP S and APP S MAKING MODERN LIVING POSSIBLE Instruction APP S 674 2.0-3.5, APP S 674 5.1-9.0 and APP S 674 21-38 ro-solutions.com Table of Contents 1. General information....2 2. Common demands for Category 2 and 3

More information

IBExU Institut für Sicherheitstechnik GmbH

IBExU Institut für Sicherheitstechnik GmbH [1] EC-TYPE EXAMINATION CERTIICATE according to Directive 94/9/EC, Annex 111 [2] Equipment and Protective Systems intended for use in Potentially Explosive Atmospheres, Directive 94/9/EC [3] EC-Type Examination

More information

MKey9-series Safety Interlock Switch with Guard Locking

MKey9-series Safety Interlock Switch with Guard Locking Original instructions MKey9-series Safety Interlock Switch with Guard Locking ABB AB / Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document

More information

INDUSTRY PROCESS AND AUTOMATION SOLUTIONS. Technical Bulletin

INDUSTRY PROCESS AND AUTOMATION SOLUTIONS. Technical Bulletin INDUSTRY PROCESS AND AUTOMATION SOLUTIONS Technical Bulletin Guidelines for selection of planetary gear units of the 300- INDUSTRIAL series for installation in hazardous areas, classified by Directive

More information

Proposal for a DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL

Proposal for a DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL EUROPEAN COMMISSION Brussels, 11.11.2011 COM(2011) 710 final 2011/0327 (COD) Proposal for a DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL amending Directive 2006/126/EC of the European Parliament

More information

IFX-M4-03 IFX-M4-03_D_E_2017_05_REV.0

IFX-M4-03 IFX-M4-03_D_E_2017_05_REV.0 IFX-M4-03 IFX-M4-03_D_E_2017_05_REV.0 Table of contents PRINCIPLE... 4 HOW TO ORDER... 4 TECHNICAL DATA... 5 Table 1.1... 6 Table 1.2... 7 Table 1.3... 7 Straight pipelines lengths... 7 Conveying liquid...

More information

NCC Leisure Battery Verification Scheme. Leisure Accommodation Vehicles

NCC Leisure Battery Verification Scheme. Leisure Accommodation Vehicles The UK trade body for the caravan, motorhome, caravan holiday and park home industry. NCC Leisure Battery Verification Scheme Leisure Accommodation Vehicles Page 1 of 11 1 Scope The NCC Battery Verification

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV SUD AMERICA - AUBURN HILLS 1755 Atlantic Blvd. Auburn Hills, MI 48326 William (Mac) Elliott Phone: 813 284 2736 MECHANICAL Valid To: August 31, 2018 Certificate

More information

124 th MEETING OF THE WORKING GROUP ON "MOTOR VEHICLES" 20 October 2014 Agenda item 4:

124 th MEETING OF THE WORKING GROUP ON MOTOR VEHICLES 20 October 2014 Agenda item 4: 124 th MEETING OF THE WORKING GROUP ON "MOTOR VEHICLES" 20 October 2014 Agenda item 4: Information from Commission services on the state of play for the Revision of Directive 2007/46/EC Enterprise and

More information

Accreditation. Deutsche Akkreditierungsstelle GmbH hereby confirms that the testing laboratory

Accreditation. Deutsche Akkreditierungsstelle GmbH hereby confirms that the testing laboratory Entrusted pursuant to 8 (1) of the German Accreditation Body Act (AkkStelleG) in conjunction with 1 (1) of the Regulation on the Entrustment of the Accreditation Body (AkkStelleGBV) Accreditation Deutsche

More information

DECLARATION OF PERFORMANCE DoP N EN

DECLARATION OF PERFORMANCE DoP N EN CONSTRUCTION PRODUCTS REGULATION (EU) 305/2011 DECLARATION OF PERFORMANCE DoP N 006-01-EN 1. Unique identification code of the product type: panic device according to DIN EN 1125:2008-04 1309-CPD-0194

More information

SERVICES SafE e-mobility for SuRE! CoNSultaNCy testing HomoloGatIoN CERtIfICatIoN

SERVICES SafE e-mobility for SuRE! CoNSultaNCy testing HomoloGatIoN CERtIfICatIoN SERVICES Safe e-mobility for sure! CONSULTANCY TESTING HOMOLOGATION CERTIFICATION With 64,000 employees worldwide the SGS Group is the leader in the fields of testing, verification and certification. Founded

More information

COMMISSION REGULATION (EU) / of XXX

COMMISSION REGULATION (EU) / of XXX EUROPEAN COMMISSION Brussels, XXX [ ](2018) XXX draft COMMISSION REGULATION (EU) / of XXX amending Regulation (EU) No 548/2014 of 21 May 2014 on implementing Directive 2009/125/EC of the European Parliament

More information

Vehicle technical inspections in the Slovak Republic. CITA Topic Area on Safety Systems

Vehicle technical inspections in the Slovak Republic. CITA Topic Area on Safety Systems Vehicle technical inspections in the Slovak Republic CITA Topic Area on Safety Systems 20.11.2014, Bratislava, Slovakia 1/15 Responsibilities of ministries Ministry of Transport, Construction and Regional

More information

(Non-legislative acts) DECISIONS

(Non-legislative acts) DECISIONS 14.5.2011 Official Journal of the European Union L 126/1 II (Non-legislative acts) DECISIONS COMMISSION DECISION of 26 April 2011 concerning a technical specification for interoperability relating to the

More information