EU Declaration of conformity

Size: px
Start display at page:

Download "EU Declaration of conformity"

Transcription

1 EU Declaration of conformity Confirm with the Directive 2006/42/EC: of the European Parliament and of the Council of 17 May 2006 on the approximation of the laws of the Member States relating to machinery Pressure equipment directive 2014/68/EU: of the European Parliament and of the Council of 15. May 2014 on the approximation of the laws of the Member States relating to machiner The appliance Product: Type: Shut-off butterfly valves, type of construction Holter Regelarmaturen BR12WT has been developed, designed and manufactured in accordance with the mentioned European Directives, and sole responsibility of Company: Application of the following standards: DIN EN ISO 12100: Safety of machinery A Technical Documention is completely available. The operating instructions for the appliance are available: in original version (German language) in English language Schloß Holte-Stukenbrock, Holter Regelarmaturen GmbH & Co.KG Place, Date Signature Specifics concerning the signatory

2 EXCELLENCE IS OUR STANDARD HORA REGELARMATUREN EU DECLARATION OF CONFORMITY No. DOC We, Helleforthstrasse Schloß Holte Stukenbrock declare under our sole responsibility, that the without automated actuator supplied valves of types BR216GF BR316GF, to which this declaration is referring to, are in compliance with the European pressure equipment directive 2014/68/EU and were subjected to the conformity assessment procedures full quality assurance (Module H) The valves covered by this declaration are classified as category I under directive 2014/68/EU. They are pressure maintaining parts intended exclusively for Installation in pressure equipment. The valves described above are in conformity with the relevant European Union harmonisation legislation and with the applied standards: DIN EN 19 Marking of metallic valves DIN EN Pressure Equipment Part 5: Compliance and inspection Documentation of Materials DIN EN 1349 Industrial process control valves DIN EN 1561 Founding Grey cast irons DIN EN 1563 Founding Spheroidal graphite cast irons DIN EN Industrial valves Testing of valves DIN EN Industrial valves Shell design strength The conformity assessment procedure and the monitoring are performed by the notified body TÜV Nord Systems GmbH & Co. KG (0045). Schloß Holte, April 61h, 2017 Lothar Brakh ge

3 EXCELLENCE IS OUR STANDARD HORA REGELARMATUREN EU DECLARATION OF CONFORMITY No. DOC20-00 We, Helleforthstrasse Schloß Holte Stukenbrock declare under our sole responsibility, that the electrically driven valves of types BR216GF BR316GF, to which this declaration is referring to, are in compliance with the European pressure equipment directive 2014/68/EU and were subjected to the conformity assessment procedures full quality assurance (Module H) The valves covered by this declaration are classified as category I under directive 2014/68/EU. They are pressure maintaining parts intended exclusively for installation in pressure equipment. Mechanical hazards not resulting from excess pressure, were considered according to the essential safety requirennents set out in Machinery Directive 2006/42/EC and appropriate preventive measures were taken. The declaration of incorporation of partly connpleted machinery for actuators is part of the documentation. The valves described above are in conformity with the relevant European Union harmonisation legislation and with the applied standards: DIN EN 19 DIN EN DIN EN 1349 DIN EN 1561 DIN EN 1563 DIN EN DIN EN Marking of metallic valves Pressure Equipment Part 5: Compliance and inspection Documentation of Materials Industrial process control valves Founding Grey cast irons Founding Spheroidal graphite cast irons Industrial valves Testing of valves Industrial valves Shell design strength The conformity assessnnent procedure and the monitoring are performed by the notified body TÜV Nord Systems GmbH & Co. KG (0045). Schloß Holte, April 6th, 2017 Lothar Brakha

4 EXCELLENCE IS OUR STANDARD HORA REGELARMATUREN EU DECLARATION OF CONFORMITY Na. D VVe, Helleforthstrasse Schloß Holte Stukenbrock declare under our sole responsibility, that the valves of types BR216 / BR225 / BR240 BR316 / BR325 / BR340, operated by electromotive, pneumatic or hydraulic force, are in compliance with the European pressure equipment directive 2014/68/EU and were subjected to the conformity assessment procedures full quality assurance (Module H) The valves covered by this declaration are classified as category I, II or III under directive 2014/68/EU. They are pressure maintaining parts intended exclusively for Installation in pressure equipment. Mechanical hazards not resulting from excess pressure, were considered according to the essential safety requirements set out in Machinery Directive 2006/42/EC and appropriate preventive measures were taken. The declaration of incorporation of partly completed machinery for actuators made by HORA is part of the documentation. The valves described above are in conformity with the relevant European Union harmonisation legislation and with the applied harmonised standards: DIN EN 19 Marking of metallic valves DIN EN 287 Fusion welding Approval testing of welders DIN EN Pressure Equipment Part 5: Compliance and inspection Documentation of Materials DIN EN 1349 Industrial process control valves DIN EN ISO 9712 Non-destructive testing Qualification and certification of NDT personnel DIN EN Flat products made of steel for pressure purposes DIN EN Metallic products Types of inspection documents DIN EN Technical delivery conditions for steel castings for pressure DIN EN Steel forgings for pressure purposes DIN EN Steels and nickel alloys for fasteners DIN EN Stainless steel bars for pressure purposes DIN EN Hot rolled weldable steel bars for pressure purposes DIN EN Industrial valves Testing of valves DIN EN Industrial valves Shell design strength DIN EN ISO Fusion welding Specification and approval of welding procedures The conformity assessment procedure and the monitoring are performed by the notified body TÜV Nord Systems GmbH & Co. KG (0045). Schloß Holte, July 15th, 2016 Lothar Brakhag

5 EU Declaration of conformity Confirm with the Directive 2006/42/EC: of the European Parliament and of the Council of 17 May 2006 on the approximation of the laws of the Member States relating to machinery Council Directive 2014/30/EU: of 20 April 2016 on the approximation of the laws of the Member States relating to electromagnetic compatibility The appliance Product: Type: Actuator, type of construction Holter Regelarmaturen MC15, MC55, MC55Y, MC100, MC103, MC160, MC163, MC250, MC253, MC400, MC403, MC500, MC503, MC1000, MC1003, MC1503, MC103SE, MC253SE, M106, M130, M140, M180 (24 V ) has been developed, designed and manufactured in accordance with the mentioned European Directives, and sole responsibility of Company: Application of the following standards: DIN EN ISO 12100: Safety of machinery DIN EN Immunity for industrial environments DIN EN Emission standard for residential, commercial and light-industrial environments A Technical Documention is completely available. The operating instructions for the appliance are available: in original version (German language) in English language Schloß Holte-Stukenbrock, Holter Regelarmaturen GmbH & Co.KG Place, Date Signature Specifics concerning the signatory

6 EU Declaration of conformity Confirm with the Directive 2006/42/EC: of the European Parliament and of the Council of 17 May 2006 on the approximation of the laws of the Member States relating to machinery Council Directive 2014/30/EU: of 20 April 2016 on the approximation of the laws of the Member States relating to electromagnetic compatibility Council Directive 2014/35/EU: of 20 April 2016 on the harmonization of the laws of the Member States relating to electrical equipment designed for use within certain voltage limits low voltage The appliance Product: Type: Actuator, type of construction Holter Regelarmaturen MC15, MC55, MC100, MC103, MC160, MC163, MC250, MC253, MC400, MC403 MC500, MC503, MC1000, MC1003, MC1503, MH2503, MC103SE, MC253SE, M106, M130, M140, M180 (230 V) has been developed, designed and manufactured in accordance with the mentioned European Directives, and sole responsibility of Company: Application of the following standards: DIN EN ISO 12100: Safety of machinery DIN EN Immunity for industrial environments DIN EN Emission standard for residential, commercial and light-industrial environments DIN EN Limits for harmonic current emissions DIN EN Limitation of voltage changes, voltage fluctuations and flicker in public lowvoltage supply systems A Technical Documention is completely available. The operating instructions for the appliance are available: in original version (German language) in English language Schloß Holte-Stukenbrock, Holter Regelarmaturen GmbH & Co.KG Place, Date Signature Specifics concerning the signatory

7

A brief guide for identification of non-compliant construction machinery. Is this. Compactor / Roller compliant with European legislation?

A brief guide for identification of non-compliant construction machinery. Is this. Compactor / Roller compliant with European legislation? A brief guide for identification of non-compliant construction machinery Is this Compactor / Roller compliant with European legislation? Introduction Construction equipment placed on the EU market for

More information

Compensation unit AGE-XY 50-80

Compensation unit AGE-XY 50-80 Translation of the origninal manual Compensation unit AGE-XY 50-80 Assembly and operating manual Superior Clamping and Gripping Imprint Imprint Copyright: This manual remains the copyrighted property of

More information

Ex m Solenoid Operator Type 0519

Ex m Solenoid Operator Type 0519 nass magnet GmbH Eckenerstrasse 4-6 D-30179 Hannover Doc. No. 113-720-0002 Revision No. 2 01.06.2015 Ex m Solenoid Operator Type 0519 Operating Instructions Dear Customer! To ensure the function and for

More information

Instruction Manual. Pressure Manhole Covers - HLSD IM70871-EN

Instruction Manual. Pressure Manhole Covers - HLSD IM70871-EN Instruction Manual Pressure Manhole Covers - HLSD IM70871-EN1 2006-03 Declaration of Conformity The designating company Alfa Laval Company Name Albuen 31, DK-6000 Kolding, Denmark Address +45 79 32 22

More information

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 18438 02 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.03.2014 to 10.03.2019 Holder of certificate: Jürgen

More information

EU RO Mutual Recognition Technical Requirements

EU RO Mutual Recognition Technical Requirements 1. PRODUCT DESCRIPTION... 1 2. DESIGN EVALUATION... 2 3. PRODUCTION REQUIREMENTS... 5 4. MARKING REQUIREMENTS... 6 5. TYPE APPROVAL CERTIFICATE CONTENT... 6 6. APPROVAL DATE AND REVISION NUMBER... 6 7.

More information

Tillers Motor hoes (combustion engine powered)

Tillers Motor hoes (combustion engine powered) Compliance Guide Rev.2.1, Edition 04/2018 This guide is intended to help market surveillance authorities with the checking of conformity of combustion engine powered brush-cutters and grass trimmers in

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17579-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 07.07.2017 to 06.07.2022 Holder of certificate: gammatest

More information

Tokyo BILD., Marunouchi, Chiyoda-ku Tokyo JAPAN. Industrial Robot

Tokyo BILD., Marunouchi, Chiyoda-ku Tokyo JAPAN. Industrial Robot EC-Statement of Compliance No. E6 9 7 25554 18 Product Service Holder of Certificate: Mitsubishi Electric Corporation Tokyo BILD., 2-7-3 Marunouchi, Chiyoda-ku Tokyo 1-831 JAPAN Name of Object: Industrial

More information

Tokyo SILO., Marunouchi, Chiyoda-ku Tokyo JAPAN. Rated Voltage: Rated Power: Protection Class:

Tokyo SILO., Marunouchi, Chiyoda-ku Tokyo JAPAN. Rated Voltage: Rated Power: Protection Class: EC-Statement of Compliance No. E6 09 07 25554 017 Holder of Certificate: Name of Object: Model(s): Mitsubishi Electric Corporation Tokyo SILO., 2-7-3 Marunouchi, Chiyoda-ku Tokyo 1 00-831 0 JAPAN Industrial

More information

Operating Instructions for Roll-Up Door Operators / MDF

Operating Instructions for Roll-Up Door Operators / MDF Operating Instructions for Roll-Up Door Operators / MDF GB Roll-Up Door Operator / MDF / Rev. 0.0 1 1. Contents 3. General safety instructions 1. Contents 2 2. Key to symbols 2 3. General safety instructions

More information

Chain-saws (combustion engine powered)

Chain-saws (combustion engine powered) Compliance Guide Rev.4.2, Edition 04/2018 Chain-saws (combustion engine powered) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels, Belgium secretariat@egmf.org +32 2 206 68 66 This

More information

Operating Instructions Garlock Butterfly Valves DN : mm / 2-24

Operating Instructions Garlock Butterfly Valves DN : mm / 2-24 Operating Instructions Garlock Butterfly Valves DN : 50-600 mm / 2-24 PN : 10 / 16 Type: GAR-SEAL SAFETY-SEAL STERILE-SEAL MOBILE-SEAL Conformity declaration... 14 0 Introduction... 15 1 Proper use...

More information

Ride-on lawnmowers (combustion engine powered)

Ride-on lawnmowers (combustion engine powered) Compliance Guide Rev.2.3 Edition 04/2018 Ride-on lawnmowers (combustion engine powered) This guide is intended to help market surveillance authorities with the checking of conformity of combustion engine

More information

Information for the Certification of Weld Shops in Rail Vehicle Construction According to DIN EN

Information for the Certification of Weld Shops in Rail Vehicle Construction According to DIN EN Information for the Certification of Weld Shops in Rail Vehicle Construction According to DIN EN 15085-2 Certificate According DIN EN 15085-2 Railway applications - Welding of railway vehicles and components

More information

EU TOY DIRECTIVE 2009/48/EC: OVERVIEW - REGULATORY CONTEXT AND MAJOR CHANGES

EU TOY DIRECTIVE 2009/48/EC: OVERVIEW - REGULATORY CONTEXT AND MAJOR CHANGES EU TOY DIRECTIVE 2009/48/EC: OVERVIEW - REGULATORY CONTEXT AND MAJOR The EU Toy Directive was revised in order to take into account the new technological developments and increasing child safety requirements.

More information

COUNCIL OF THE EUROPEAN UNION. Brussels, 11 December /3/06 REV 3 ADD 1. Interinstitutional File: 2003/ 0153(COD) ENT 84 CODEC 561

COUNCIL OF THE EUROPEAN UNION. Brussels, 11 December /3/06 REV 3 ADD 1. Interinstitutional File: 2003/ 0153(COD) ENT 84 CODEC 561 COUNCIL OF THE EUROPEAN UNION Brussels, 11 December 2006 Interinstitutional File: 2003/ 0153(COD) 9911/3/06 REV 3 ADD 1 T 84 CODEC 561 STATEMT OF THE COUNCIL'S REASONS Subject : Common Position adopted

More information

Actuators for air dampers and control valves of oil burners

Actuators for air dampers and control valves of oil burners 7 812 Actuators for air dampers and control valves of oil burners SQM1... SQM2... Reversible electromotoric actuators Torques: - SQM1... up to 10 Nm - SQM2... up to 20 Nm Running times: - SQM1... 14...100

More information

Hedge trimmers (combustion engine powered)

Hedge trimmers (combustion engine powered) Compliance Guide Rev.2.1 Edition 04/2018 Hedge trimmers (combustion engine powered) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels, Belgium secretariat@egmf.org +32 2 706 82 37 This

More information

SKF Electro-pneumatic Barrel Pump EPB-Pump-ECO (Original operating and maintenance instructions according to EU Directive 2006/42/EC)

SKF Electro-pneumatic Barrel Pump EPB-Pump-ECO (Original operating and maintenance instructions according to EU Directive 2006/42/EC) SKF Electro-pneumatic Barrel Pump EPB-Pump-ECO (Original operating and maintenance instructions according to EU Directive 2006/42/EC) TABLE OF CONTENTS 1 EC Declaration of incorporation...1 2 General description...2

More information

WELMEC External Auxiliary Power Supply of Electrical Energy Meters

WELMEC External Auxiliary Power Supply of Electrical Energy Meters WELMEC 11.8 2018 External Auxiliary of Electrical Energy Meters WELMEC is a cooperation between the legal metrology authorities of the Member States of the European Union and EFTA. This document is one

More information

SITRANS P measuring instruments for pressure

SITRANS P measuring instruments for pressure Overview Application The pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials guarantees compliance with

More information

Pneumatic Axial Fan Type Tech. Doc. No. 802

Pneumatic Axial Fan Type Tech. Doc. No. 802 Pneumatic Axial Fan Type Tech. Doc. No. 802 Illustration can differ from the original Operation and Maintenance Manual Compiled: 06.08.13 815340300_en_Version_02 Page 1 of 11 ATTENTION!!! This pneumatic

More information

CETOP POSITION PAPER PP 07

CETOP POSITION PAPER PP 07 CETOP POSITION PAPER PP 07 MACHINERY DIRECTIVE 2006/42/EC Valid since 26 th May 2010 CETOP General Secretariat Lyoner Straße 18 D-60528 Frankfurt am Main Phone: +49 69 6603 1201 Fax: +49 69 6603 2201 E-mail:

More information

Declaration of Performance (DoP)

Declaration of Performance (DoP) No. DoP 1 1/3 1. 2. Unique identification code of the product-type SPAX Type, batch or serial number or any other element allowing identification of the construction product as required pursuant to Article

More information

Actuators for air dampers and control valves of oil burners

Actuators for air dampers and control valves of oil burners 7 812 Actuators for air dampers and control valves of oil burners SQM1... SQM2... Reversible electromotoric actuators Torques: - SQM1... up to 10 Nm - SQM2... up to 20 Nm Running times: - SQM1... 14...100

More information

Broetje-Automation Company Standard Structural component specification for welded parts

Broetje-Automation Company Standard Structural component specification for welded parts Broetje-Automation Company Standard Table of Contents Application Area and Purpose 3 1 Structural components pursuant to DIN 1090 4 1.1 Structural component classification 4 1.1.1 Steel components < Strength

More information

How to get started. with. Kongsberg XP Auto systems. Serial number: Please Read This First

How to get started. with. Kongsberg XP Auto systems. Serial number: Please Read This First How to get started with Kongsberg XP Auto systems Serial number: Please Read This First Note We remind you that only the Esko staff, or persons having received appropriate training, are allowed to handle,

More information

12468/10 SJC/fp 1 DG I 1A

12468/10 SJC/fp 1 DG I 1A COUNCIL OF THE EUROPEAN UNION Brussels, 20 July 2010 12468/10 ENV 504 ENT 91 COVER NOTE from: European Commission date of receipt: 16 July 2010 to: General Secretariat of the Council Subject: Commission

More information

Solenoid Operator 0516 / 1216

Solenoid Operator 0516 / 1216 nass magnet GmbH Edition no. 2 Eckenerstraße 4-6 2007-01-10 D-30179 Hannover Rev.2 070110 Solenoid Operator 0516 / 1216 Operating Instructions NN 8220 126 and EC Declaration of Conformity Dear Customer!

More information

ETSI EN V1.2.1 ( ) Harmonized European Standard (Telecommunications series)

ETSI EN V1.2.1 ( ) Harmonized European Standard (Telecommunications series) EN 301 783-2 V1.2.1 (2010-07) Harmonized European Standard (Telecommunications series) Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Commercially available amateur

More information

Use and Maintenance Manual

Use and Maintenance Manual 1 Use and Maintenance Manual Extension arm RO 27.09.2016 Extension arm RO 2 Contents: 1. Introductory Remarks... 3 2. Application... 3 3. Reservations of Producer... 3 4. Technical Data... 3 5. Structure

More information

ANNEX MOTOR VEHICLES AND MOTOR VEHICLES' PARTS. Article 1. General Provisions

ANNEX MOTOR VEHICLES AND MOTOR VEHICLES' PARTS. Article 1. General Provisions ANNEX MOTOR VEHICLES AND MOTOR VEHICLES' PARTS Article 1 General Provisions 1. This Annex shall apply to motor vehicles in UNECE vehicle regulations' category M1 as well as parts and equipment regulated

More information

Solenoid Operator 0513 / 1213

Solenoid Operator 0513 / 1213 nass magnet GmbH Run Nr. 5 Eckenerstraße 4-6 24.10.2006 D-30179 Hannover Rev. 5 061024 Solenoid Operator 0513 / 1213 Operating Instructions NN 8220 112 and EC Declaration of Conformity Dear Customer! In

More information

INDUSTRY PROCESS AND AUTOMATION SOLUTIONS. Technical Bulletin

INDUSTRY PROCESS AND AUTOMATION SOLUTIONS. Technical Bulletin INDUSTRY PROCESS AND AUTOMATION SOLUTIONS Technical Bulletin Guidelines for selection of planetary gear units of the 300- INDUSTRIAL series for installation in hazardous areas, classified by Directive

More information

These operating instructions apply for: NCX 380 NCZ 300 NCX 480 NCZ 370 NCX 580 L NCZ 480 NCX 660 K NCZ 560 NCZ 660 NCZ 800

These operating instructions apply for: NCX 380 NCZ 300 NCX 480 NCZ 370 NCX 580 L NCZ 480 NCX 660 K NCZ 560 NCZ 660 NCZ 800 Original instructions Operating Instructions for May 2010 Electric Internal Vibrators BA No. 1092E Series NCX and NCZ These operating instructions apply for: NCX 380 NCZ 300 NCX 480 NCZ 370 NCX 580 L NCZ

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11065-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 08.02.2016 to 07.02.2021 Holder of certificate: Actemium

More information

EUnited Municipal Equipment

EUnited Municipal Equipment Municipal Equipment European Association of Municipal Equipment Manufacturers A brief guide for identification of non-compliant refuse collection vehicles Is this refuse collection vehicle compliant with

More information

EC-CERTIFICATE OF CONFORMITY 0432 CPD 0031

EC-CERTIFICATE OF CONFORMITY 0432 CPD 0031 MATERIALPRÜFUNGSAMT NORDRHEI N - WESTFALEN EC-CERTIFICATE OF CONFORMITY 0432 CPD 0031 In compliance with the Directive 89/106/EEC of the Council of European Communities of 21 December 1988 on the approximation

More information

SAFET Y PRODUCTS. TT-Series Safety Edge Product Manual

SAFET Y PRODUCTS. TT-Series Safety Edge Product Manual SAFET Y PRODUCTS TT-Series Safety Edge Product Manual 2TLC010046M0201_B ORIGINAL INSTRUCTION S Read and understand this document Please read and understand this document before using the products. Please

More information

COMMISSION REGULATION (EU)

COMMISSION REGULATION (EU) 30.11.2010 Official Journal of the European Union L 313/3 REGULATIONS COMMISSION REGULATION (EU) No 1103/2010 of 29 November 2010 establishing, pursuant to Directive 2006/66/EC of the European Parliament

More information

Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return

Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return SERIES Features Rack and pinion quarter turn (90 ) rotation Double acting and spring return models Prelubricated and tested

More information

AC 100. Operating instructions Pneumatic Crimper AC 100. Date of issue: 05/2010. Keep for future use!

AC 100. Operating instructions Pneumatic Crimper AC 100. Date of issue: 05/2010. Keep for future use! Operating instructions Pneumatic Crimper AC 100 Date of issue: 05/2010 Keep for future use! SAFETY SAFETY Basic information The basic prerequisite for ensuring safe use and continuous operation of the

More information

NOTE Please read this Operating Manual carefully before first using the device and strictly adhere to the instructions!

NOTE Please read this Operating Manual carefully before first using the device and strictly adhere to the instructions! Rev. 1.8 Operating Manual for Pressure Sensors 97PA-21x-xxx page 1 of 6 Operating Manual Pressure Sensors Article numbers: 97PA-21G-10 97PA-21G-50 97PA-21Y-5 97PA-21Y-25 97PA-21Y-160 97PA-21Y-400 NOTE

More information

IBExU Institut für Sicherheitstechnik GmbH

IBExU Institut für Sicherheitstechnik GmbH [1] EC-TYPE EXAMINATION CERTIICATE according to Directive 94/9/EC, Annex 111 [2] Equipment and Protective Systems intended for use in Potentially Explosive Atmospheres, Directive 94/9/EC [3] EC-Type Examination

More information

Tina 4A Connection block

Tina 4A Connection block Original instructions Tina 4A Connection block Instructions valid for versions of the product from ver. H ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read

More information

DECLARATION OF PERFORMANCE DoP N EN

DECLARATION OF PERFORMANCE DoP N EN CONSTRUCTION PRODUCTS REGULATION (EU) 305/2011 DECLARATION OF PERFORMANCE DoP N 006-01-EN 1. Unique identification code of the product type: panic device according to DIN EN 1125:2008-04 1309-CPD-0194

More information

HyLAW. HyDrail Rail Applications Assessment. Main Author(s): [Dainis Bošs, Latvian Hydrogen association] Contributor(s):

HyLAW. HyDrail Rail Applications Assessment. Main Author(s): [Dainis Bošs, Latvian Hydrogen association] Contributor(s): HyLAW HyDrail Rail Applications Assessment Main Author(s): [Dainis Bošs, Latvian Hydrogen association] Contributor(s): Status: [V1] Dissemination level: [public] 1 Acknowledgments: The HyLAW project has

More information

WOOOM INSTRUCTION MANUAL

WOOOM INSTRUCTION MANUAL WOOOM INSTRUCTION MANUAL Thank you very much for choosing the Wooom chair from Klöber! Please read this instruction manual carefully before using the chair. Please download the Wooom app to your device

More information

SAFETY PRODUCTS. ASK-Series Safety Mat Product Manual

SAFETY PRODUCTS. ASK-Series Safety Mat Product Manual SAFETY PRODUCTS ASK-Series Safety Mat Product Manual 2TLC010047M0201_D ORIGINAL INSTRUCTIONS Read and understand this document Please read and understand this document before using the products. Please

More information

Solar Expansion Vessels

Solar Expansion Vessels Installation and Maintenance Instructions Solar Expansion Vessels EN v 2.1-1 - 1. General Information Expansion vessels with either fi xed or exchangeable membrane made by VAREM S.p.a. meet the requirements

More information

(Non-legislative acts) DECISIONS

(Non-legislative acts) DECISIONS 14.5.2011 Official Journal of the European Union L 126/1 II (Non-legislative acts) DECISIONS COMMISSION DECISION of 26 April 2011 concerning a technical specification for interoperability relating to the

More information

EU Declaration of Conformity

EU Declaration of Conformity Product: Name and address of the manufacturer: Rockwell Automation Inc. 1201 South 2nd Street Milwaukee, WI 53204 U.S.A. EU Declaration of Conformity Kinetix 6000/6200/6500/6000M Digital Servo Drives and

More information

Honeywell VV, VP, VB & MS SERIES FOR VQ400M CLASS A VALVES PRODUCT HANDBOOK APPLICATION

Honeywell VV, VP, VB & MS SERIES FOR VQ400M CLASS A VALVES PRODUCT HANDBOOK APPLICATION Honeywell VV, VP, VB & MS SERIES FOR VQ400M CLASS A VALVES PRODUCT HANDBOOK APPLICATION The VV Series class A vent valves are intended to be used in combination with the VQ400M series combination valve.

More information

Operating Instructions for Control CS 300

Operating Instructions for Control CS 300 Operating Instructions for Control CS 00 GB CS 00 Gate Controls / Rev. 5.5 . Contents. General safety instructions. Contents. Key to symbols. General safety instructions 4. Overview of products 5. Initial

More information

EC-CERTIFICATE OF CONFORMITY 0432 CPD 0031

EC-CERTIFICATE OF CONFORMITY 0432 CPD 0031 EC-CERTIFICATE OF CONFORMITY 0432 CPD 0031 In compliance with the Directive 89/106/EEC of the Council of European Communities of 21 December 1988 on the approximation of laws, regulations and administrative

More information

EU Declaration of Conformity

EU Declaration of Conformity Product: Name and address of the manufacturer: Rockwell Automation Inc. 1201 South 2nd Street Milwaukee, WI 53204 U.S.A. EU Declaration of Conformity Kinetix 5500/5700 Digital Servo Drives and Accessories

More information

AXIAL FANS Axis / Tubo OPERATION MANUAL

AXIAL FANS Axis / Tubo OPERATION MANUAL TUBO-M AXIS-QA AXIS-Q AXIS-QR AXIS-F AXIS-QRA AXIAL FANS Axis / Tubo OPERATION MANUAL Axis / Tubo www.blaubergventilatoren.de CONTENT 3 Introduction 3 General 3 Safety rules 3 Transport and storage requirements

More information

Operating instructions Solenoid interlock TKM/TKF. 1. About this document. Content

Operating instructions Solenoid interlock TKM/TKF. 1. About this document. Content 1. About this document Operating instructions.............pages 1 to 6 Original 1.1 Function This operating instructions manual provides all the information you need for the mounting, set-up and commissioning

More information

Disclaimer: This brochure is for information only. The manufacturer reserves the right to modify specifications.

Disclaimer: This brochure is for information only. The manufacturer reserves the right to modify specifications. USER MANUAL 2 3 Table of contents 4-5 6 7 8 9 10 11 12 Safety recommendations elebia autohook system / Installation Main features Specifications / Regulatory standards elebia remote control / Working modes

More information

ANNEX. to the DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL

ANNEX. to the DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL EUROPEAN COMMISSION Brussels, 1.2.2017 COM(2017) 47 final ANNEX 1 ANNEX to the DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL amending Directive 2003/59/EC on the initial qualification and periodic

More information

Installation Instructions

Installation Instructions Installation Instructions ELEKTROMAT SE 15.48-25,40 NOT DEFINED Model: 10004112 10006 -en- Status: 21.07.2016 2 GfA ELEKTROMATEN UK Ltd Titan Business Centre Spartan Close Warwick CV34 6RR United Kingdom

More information

EU RO Mutual Recognition Technical Requirements

EU RO Mutual Recognition Technical Requirements 1. PRODUCT DESCRIPTION... 1 2. DESIGN EVALUATION... 2 3. PRODUCTION REQUIREMENTS... 6 4. MARKING REQUIREMENTS... 6 5. TYPE APPROVAL CERTIFICATE CONTENT... 7 6. APPROVAL DATE AND REVISION NUMBER... 7 7.

More information

CE DECLARATION OF CONFORMITY

CE DECLARATION OF CONFORMITY CE DECLARATION OF CONFORMITY PRODUCT Product Model: Description: p/n 2047570-90 p/n 2047597-90 p/n 2047584-90 p/n 2047564-90 p/n 2047553-90 p/n 2047536-90 p/n 2047528-90 p/n 2047581-90 Loudspeaker / Structural

More information

Technical Documentation

Technical Documentation Technical Documentation Product manual Holding brake controller Document: 0198441113316 Edition: V1.00, 03.2006 Important information The drive systems described here are products for general use that

More information

ARI-Strainer. ARI-Strainer - Screen and supporting basket made of stainless steel. ARI-Strainer - Y-pattern with flanges

ARI-Strainer. ARI-Strainer - Screen and supporting basket made of stainless steel. ARI-Strainer - Y-pattern with flanges ARI-Strainer ARI-Strainer - Screen and supporting basket made of stainless steel ARI-Strainer - Y-pattern with flanges TRB 801 Annex II No. 45 (except EN-JL1040) EN ISO 15848-1 / TA - Luft TÜV-Test-No.

More information

Operating and Maintenance Manual. for. HADEF overhead crane. as jointed crane TA

Operating and Maintenance Manual. for. HADEF overhead crane. as jointed crane TA 5.52.714.00.1.0 Edition 03.2004 GB Operating and Maintenance Manual for HADEF overhead crane as jointed crane TA Subject to changes. 1 HADEF Table of Contents 1 General Page 3 2 Product description Page

More information

COMMISSION REGULATION (EU)

COMMISSION REGULATION (EU) 10.11.2010 Official Journal of the European Union L 292/21 COMMISSION REGULATION (EU) No 1009/2010 of 9 November 2010 concerning type-approval requirements for wheel guards of certain motor vehicles and

More information

Guideline of the Railway Vehicles Coordination Committee (Draft Guideline DVS 1619)

Guideline of the Railway Vehicles Coordination Committee (Draft Guideline DVS 1619) Guideline of the Railway Vehicles Coordination Committee (Draft Guideline DVS 1619) Procedure for the certification of welding manufacturers for welding railway vehicles and components according to DIN

More information

Principle Decision by the Central Experience Exchange Circle of the Notified Bodies and the GS Bodies according to the Product Safety Act ZEK

Principle Decision by the Central Experience Exchange Circle of the Notified Bodies and the GS Bodies according to the Product Safety Act ZEK -GB-2017-01: Defining the requirements for a GS mark approval Principle Decision by the Central Experience Exchange Circle of the Notified Bodies and the GS Bodies according to the Product Safety Act about

More information

COMMISSION REGULATION (EU)

COMMISSION REGULATION (EU) 30.11.2011 Official Journal of the European Union L 317/17 COMMISSION REGULATION (EU) No 1235/2011 of 29 November 2011 amending Regulation (EC) No 1222/2009 of the European Parliament and of the Council

More information

Revised mandate to CEN for standardization in the field of recreational craft.

Revised mandate to CEN for standardization in the field of recreational craft. EUROPEAN COMMISSION DIRECTORATE-GENERAL III INDUSTRY Legislation and standardization and telematics networks Standardization Brussels, 1st August 1994 PDL M/075 Revised mandate to CEN for standardization

More information

Operating instructions for worm gear boxes

Operating instructions for worm gear boxes Operating instructions for worm gear boxes DREHMO Sales and Service of EMG-Actuators Direct mounting Foot and lever ON/OFF- and Modulating duty Type MSG 25-S to MSG 8000-S MSG 12-R to MSG 2500-R English

More information

Technical Summary. Contract for Procurement of Manual Valves, Relief Valves, Control Valves, and Valve Actuators (IO/15/CFT/11867/ACS CP/3)

Technical Summary. Contract for Procurement of Manual Valves, Relief Valves, Control Valves, and Valve Actuators (IO/15/CFT/11867/ACS CP/3) Purpose Technical Summary Contract for Procurement of Manual Valves, Relief Valves, Control Valves, and Valve Actuators (IO/15/CFT/11867/ACS CP/3) The purpose of this Call for Nominations is to establish

More information

L /2012 rev 0 BISON 45 OTI UNIONE NAZIONALE COSTRUTTORI AUTOMATISMI PER CANCELLI, PORTE SERRANDE ED AFFINI

L /2012 rev 0 BISON 45 OTI UNIONE NAZIONALE COSTRUTTORI AUTOMATISMI PER CANCELLI, PORTE SERRANDE ED AFFINI L8542965 03/2012 rev 0 BISON 45 OTI UNIONE NAZIONALE COSTRUTTORI AUTOMATISMI PER CANCELLI, PORTE SERRANDE ED AFFINI 1 470 327 F A 500 825 B 243.5 2 C 445 210 15 ±5 205 92 50 2 3 4 I D2 D2 D1 5 T 6 D A

More information

L /2012 rev 0 BISON 30 OTI UNIONE NAZIONALE COSTRUTTORI AUTOMATISMI PER CANCELLI, PORTE SERRANDE ED AFFINI

L /2012 rev 0 BISON 30 OTI UNIONE NAZIONALE COSTRUTTORI AUTOMATISMI PER CANCELLI, PORTE SERRANDE ED AFFINI L8542968 07/2012 rev 0 BISON 30 OTI UNIONE NAZIONALE COSTRUTTORI AUTOMATISMI PER CANCELLI, PORTE SERRANDE ED AFFINI 1 458 250 A F 645 477 B 195 470 270 2 C 13 ±5 156 70 2 3 4 D2 R D2 I D1 T 5 W D H G R

More information

Service - Safety Manual

Service - Safety Manual Service - Safety Manual Mounting and maintenance instructions Linear Units LT50 series Code Unit Serial number Date by Linear Units LT50 series Table of contents 1 Safety 3 1.1 Significance of the manual

More information

Braking Devices BR 230/ Assembly- and Commissioning Instructions

Braking Devices BR 230/ Assembly- and Commissioning Instructions electronic Braking Devices BR 230/400-10...400 Assembly- and Commissioning Instructions Quality is our Drive. BR 230/400-10...400 1 as per 04/10 11600.10001 Table of Contents Page 1. Safety notes 3 2.

More information

Diaphragm Valve MV pneumatic - with pneumatically directly controlled actuator

Diaphragm Valve MV pneumatic - with pneumatically directly controlled actuator Diaphragm Valve MV 0 - pneumatic - with pneumatically directly controlled actuator Advantage good control characteristics DN 5 - DN 50 equipped as standard with visual position indicator and manual emergency

More information

Operating Instruction Electro hydraulic workshop presses HPE

Operating Instruction Electro hydraulic workshop presses HPE Operating Instruction Electro hydraulic workshop presses HPE Type Serial number Date Rev. A 116967 07/2011 EC Declaration of Conformity according to EC directive 2006/42/EC on machinery Typ Hier Typenschild

More information

ARI-Strainer. Strainer - Screen and supporting basket made of stainless steel. ARI-Strainer - Y-pattern with flanges

ARI-Strainer. Strainer - Screen and supporting basket made of stainless steel. ARI-Strainer - Y-pattern with flanges Strainer - Screen and supporting basket made of stainless steel ARI-Strainer - Y-pattern with flanges TRB 801 Annex II No. 45 (except EN-JL1040) German TA - Luft TÜV-Test-No. 922-9204866 Grey cast iron

More information

Official Journal of the European Communities

Official Journal of the European Communities 1.11.2000 EN Official Journal of the European Communities L 279/33 DIRECTIVE 2000/55/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 18 September 2000 on energy efficiency requirements for ballasts

More information

Diaphragm Valve MV 310

Diaphragm Valve MV 310 ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Application chemical plants water treatment Utilisation

More information

Special Radial piston pumps Type SRK-ATEX

Special Radial piston pumps Type SRK-ATEX Special Radial piston pumps Type SRK-ATEX Features High volumetric efficiency Self-priming and venting Low pulsation Low noise level Design Radial piston pump of modular design With valve controlled pump

More information

by Blum SERVO-DRIVE Installation instructions

by Blum SERVO-DRIVE Installation instructions by Blum SERVO-DRIVE Installation instructions www.blum.com Table of contents Using the installation instructions...4 Intended use...4 Safety... 4 Warning signs and danger symbols... 6 Structural changes

More information

Mounting and Operating Instructions EB 8135/8136 EN. Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil

Mounting and Operating Instructions EB 8135/8136 EN. Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil Type 3535 Three-way Valve with bellows seal and rod-type yoke (partial view) Mounting and Operating Instructions EB 8135/8136 EN Edition

More information

Butterfly valves. Introduction. Made of ductile cast iron

Butterfly valves. Introduction. Made of ductile cast iron Made of ductile cast iron Introduction The portfolio of valves supplied by Keulahütte GmbH in Krauschwitz is rounded off by butterfly valves and check valves, which have been designed according to international

More information

QUESTION / CLARIFICATION

QUESTION / CLARIFICATION QUESTION / CLARIFICATION CO-ORDINATION BETWEEN NOTIFIED BODIES INTEROPERABILITY DIRECTIVE AND SUBSEQUENT AMENDMENTS ON THE INTEROPERABILITY OF THE RAIL SYSTEM WITHIN THE UNION QC-RST-020 Issue 02 Date:

More information

Strainer. ARI-Strainer. ARI-Strainer Y-pattern with flanges. ARI-Strainer Y-pattern with flanges. ARI-Strainer Y-pattern with butt weld ends

Strainer. ARI-Strainer. ARI-Strainer Y-pattern with flanges. ARI-Strainer Y-pattern with flanges. ARI-Strainer Y-pattern with butt weld ends Strainer ARI-Strainer ARI-Strainer Y-pattern with flanges German "TA-Luft" TÜV-Test-No. 922-9204866 TRB 801 No. 45 (except cast iron) Cast iron Nodular iron Cast steel BR 050 Page 2 ARI-Strainer Y-pattern

More information

Mounting and Operating Instructions EB 8227 EN. Pneumatic Control Valve Type 3331/BR 31a Special version Type 3331/3278. Type 3331 Butterfly Valve

Mounting and Operating Instructions EB 8227 EN. Pneumatic Control Valve Type 3331/BR 31a Special version Type 3331/3278. Type 3331 Butterfly Valve Pneumatic Control Valve Type 3331/BR 31a Special version Type 3331/3278 Type 3331 Butterfly Valve Fig. 1 Type 3331/BR 31a (below) and Type 3331/3278 (top) Mounting and Operating Instructions EB 8227 EN

More information

Certificate of constancy of performance

Certificate of constancy of performance 0402-CPR-SC0221-16 In compliance with Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 (the Construction s Regulation or CPR), this certificate applies to the construction

More information

Operating Instructions for Control CS 300

Operating Instructions for Control CS 300 Operating Instructions for Control CS 00 GB CS 00 Gate Controls / Rev.A 5.5 . Contents. General safety instructions. Contents. Key to symbols. General safety instructions 4. Overview of products 5. Initial

More information

Operating instructions Rotary actuators M135 M140 M150 M180. June 2012 / / EN

Operating instructions Rotary actuators M135 M140 M150 M180. June 2012 / / EN Operating instructions Rotary actuators M135 M140 M150 M180 June 2012 / 118614 / EN General information General information Proof of amendment Copyright Subject to alterations Manufacturer Version Date

More information

Grey cast iron SG iron Cast steel/ Forged steel High temperature steel Stainless steel Fig. 631 Page 2

Grey cast iron SG iron Cast steel/ Forged steel High temperature steel Stainless steel Fig. 631 Page 2 CONA S Ball float steam trap Ball float steam trap Ball float steam trap PN16 / PN40 - with flanges (Fig. 631...1) - with screwed sockets (Fig. 631...2) - with socket weld ends (Fig. 631...3) - with butt

More information

HDF3-A Type 7 HDF4-A Type 3

HDF3-A Type 7 HDF4-A Type 3 Quality System ISO 9001 Certified Environmental Management System ISO 14001 Certified See pages 16 for ATEX ratings Heavy Duty Flap Valve HDF3-A Type 7 HDF4-A Type 3 Air-Operated Double Pump ENGINEERING,

More information

ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN

ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric

More information

KKAI Report No Rev 1 Prepared for BioHeatUSA April 28, 2009

KKAI Report No Rev 1 Prepared for BioHeatUSA April 28, 2009 1. Summary... 3 2. Background... 3 3. Scope... 3 4. European Suppliers... 4 5. Materials... 4 6. Design... 4 7. Fabrication... 5 8. Examination... 6 9. Inspection... 6 10. Testing... 8 11. Quality Control

More information

COMMISSION RECOMMENDATION. of XXX

COMMISSION RECOMMENDATION. of XXX EUROPEAN COMMISSION Brussels, XXX [ ](2017) XXX draft COMMISSION RECOMMENDATION of XXX on the use of fuel consumption and CO 2 emission values type-approved and measured in accordance with the World Harmonised

More information

COMMISSION REGULATION (EU) No /.. of XXX

COMMISSION REGULATION (EU) No /.. of XXX EUROPEAN COMMISSION Brussels, XXX B4 1667206 [ ](2014) XXX DRAFT 30.04.2014 COMMISSION REGULATION (EU) No /.. of XXX supplementing Regulation (EC) No 661/2009 of the European Parliament and of the Council

More information

AIR RESERVOIRS. Product Catalogue

AIR RESERVOIRS. Product Catalogue AIR RESERVOIRS Product Catalogue 0 Air Reservoirs Content 003 0 003 0 0 003... 5 05 10 010 10... 5 03 03 0 05 10 02 003 158 133... 5 2 133 158 158 133 158 0... 6 05 0 158 0 02 0... 0 10 0 010 0 0... 10

More information