Butterfly valve VZAF

Transcription

1

2 Key features and product range overview General Construction Characteristics Supplier Nominal diameter Wafer Ideal for very corrosive, InterApp DN32 DN900 VZAF-C agressive and high purity application Flow rate Kv m³/h Lug Gas-tight VZAF-L U-section VZAF-U Large variety of body and liner material V ersion Type N ominal diamet er R at ing norm [ mm] W af er t yp e VZAF-C DN32 DN400 PN10 coverd by PN16 DN450 DN600 PN10 DN32 DN600 PN16 Lug t yp e DN40 DN400 Ansi cl. 150 coverd by PN16 DN450 DN600 Ansi cl. 150 VZAF-L DN32 DN150 PN10 covered by PN16 DN200 DN400 PN10 DN32 DN400 PN16 U - sect io n DN40 DN400 Ansi cl. 150 VZAF-U DN450 DN700 PN10 DN800 DN900 PN10 DN450 DN700 DN800 DN900 PN16 PN16 DN450 DN900 Ansi cl Subject to change 2015/04

3 Order information Modular system - Individual selection by modular system, tailored for specific customer needs - Scale of 3 different body materials 9 different disc materials 4 different liner materials 3 different back liner materials several options available - All parameters which are shown in type code can be ordered by - KMAT part no.: Examples of typical configurations for following solutions: Chemical applications, acids of all kinds VZAF-C S8PN16-H1EP80-V3-V3PFA-T1 Chlorine production VZAF-C S8PN16-H1EP80-V3-V3PFA-U3 Ultrapure water for semiconductor industry VZAF-L S8PN10-H1EP80-V3-V3PFA-T1 Pharmaceutical applications VZAF-L S8PN16-V13-V3-V3PL-T1 3 Subject to change 2015/04

4 Type code part 1 VZAF - C S8 PN10 - H1 PU80 Type VZAF Design C L U Butterfly valve Ring housing with centring holes (Wafer) Ring housing with threaded flange (Lug) U-section housing Nominal diameter DN mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm 700mm - 900mm on request Nominal pressure 2,5 2.5 bar on request (available at DN750) 6 6 bar (available at DN350...DN750, DN800-DN900) bar (available at DN200...DN300) bar (available at DN32...DN150) Connection standard S8 DIN EN S9 ANSI Class 150 Nominal pressure connection standard PN10 PN16 PN10 PN16 Standard and just with [S9] ANSI Class 150 Housing material V13 Stainless steel H1 Ductile cast iron, EN-GJS Surface finish, housing EP80 Epoxid coated 80 μ 4 Subject to change 2015/04

5 Type code part 2 - V1 - V1 PL - T1 - C - E4 - TA - EX4 Shaft material V1 Stainless steel V3 Stainless steel V10 Stainless steel Shut-off element material V1 Stainless steel V3 Stainless steel ST1 Carbon steel (ST 52-3 N) Surface finish, shut-off element PL PFA PFA1 Seal material T1 T2 T3 U1 U2 U3 T1A T2A T3A U1A U2A U3A PWIS content C None Polished PFA coated PFA coated, anti-static PTFE/silicone PTFE/EPDM PTFE/FPM PTFE Ultraflon/silicone PTFE Ultraflon/EPDM PTFE Ultraflon/FPM PTFE/silicone, anti-static PTFE/EPDM, anti static PTFE/FPM, anti static PTFE Ultraflon/silicone, anti static PTFE Ultraflon/EPDM, anti static PTFE Ultraflon/FPM, anti static Standard PWIS-free Clean room features None E4 Clean-roon approval ISO class ISO 4 Additional seal option None TA With TA-Luft packing in accordance with VDI 2440 EU approval EX4 None II 2GD 5 Subject to change 2015/04

6 Technical data Function Designed as Wafer, Lug or U-section General technical data Process valve connection Valve function 2/2-way Design Butterfly valve in wafer, lug & u-section design Sealing principle Soft Actuation type Mechanical Manual override None Approved for use in food industry Yes Switching position display Slot direction on shaft = flow direction Direction of flow Reversible Type of mounting In-line installation Mounting position Any (DN 450 and bigger horizontal) Based on connection standard DIN EN ANSI Class 150 Operating and environmental conditions Process valve nominal pressure1) PN 10; PN 16 / Class 150 Vacuum [mbara] 20 conditions: Nominal diameter [mm]: max. DN300 Liner: Ultraflon Media: neutral media without solid content, max. +80 C Temperature of medium [ C] (depending on material and other working conditions) 1) PN class to DIN EN 1333 / ASME B 16.5 ATEX description Disc material All disc material All not coated discs or with anti static coating (PFA1) ATEX-description II 2GD(o) c IIC X II 1GD(i)/2GD(o) c IIC X Installation Note In case of mounting the valve at the end of a line please note: Body type Medium Max. working pressure Lug type [L] only for non hazardous liquids, ºC DN DN bar 6 bar DN bar > DN 600 on request on request no water hammer! 6 Subject to change 2015/04

7 Technical data (Liner material information) Liner Code Name DIN Material Temperature range [ C] T Teflon PTFE has excellent chemical resistance, electrical properties, high temperature performance, low temperature toughness, plus unique adhesion and flame resistance / w ith EPDM back-liner for high purity and silicone free applications T2A Conductive Teflon PTFE for ATEX applications U2 Ultraflon is the material choice w here high purity, low friction, high durability, excellent thermal resistance and chemical inertness characteristics are required / w ith silicone back-liner, for high purity applications U2A Conductive Ultraflon for ATEX applications T1 Teflon PTFE has excellent chemical resistance, electrical properties, high temperature performance, low temperature toughness, plus unique adhesion and flame resistance / w ith silicone back-liner for standard applications T1A Conductive Teflon PTFE for ATEX applications U1 Ultraflon is the material choice w here high purity, low friction, high durability, excellent thermal resistance and chemical inertness characteristics are required / w ith silicone back-liner, for low and high temperature applications U1A Conductive Ultraflon for ATEX applications T3 Teflon PTFE has excellent chemical resistance, electrical properties, high temperature performance, low temperature toughness, plus unique adhesion and flame resistance / w ith Viton back-liner for high corrosive applications T3A Conductive Teflon PTFE for ATEX applications U3 Ultraflon is the material choice w here high purity, low friction, high durability, excellent thermal resistance and chemical inertness characteristics are required / w ith Viton back-liner, it is the most corrosion resistant valve of our program range U3A Conductive Ultraflon for ATEX applications Subject to change 2015/04

8 Technical data (actuating torques & Kv values) Torques with PTFE liner, incl. safty factor DN 32/ Nm Kv values Nominal Kv values [m3/h] at opening angle of the valve diameter DN32/ DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN Subject to change 2015/04

9 Technical data Dimensions for Wafer type 1) 1) > DN x threads on valve neck and bottom Size A B C D E Weight Ø ±0,5 [kg] 32/40 105, , , , , , , , , , , , Connection information page 12 9 Subject to change 2015/04

10 Technical data Dimensions for Lug type Size A B C D E Weight Ø ±0,5 [kg] 32/ , , , , , , , , , , Connection information page Subject to change 2015/04

11 Technical data Dimensions for U-section type 2) 2) DN , 2 threads on both sides Size A B C D J E Weight Ø ±0,5 ±0,5 [kg] , , Connection information page Subject to change 2015/04

12 Technical data Dimensions for all types DN DN Size E G d e f ISO a b n x Øy ±0,5 ±1 Ø Ø 32/ F x ,5 F x F x F x F05/ /70 4x7/ F05/ /70 4x7/ F x F07/ /102 4x9/ F x F x F x13, F x13, Ø F x Ø F x Ø F x Ø F x Ø ,5 F x Ø ,5 F x Ø ,5 F x22 12 Subject to change 2015/04

13 Hand lever for VZAF Selection assistance for part no. Dimension hand lever Design Nominal size (DN) Part No. Type Code AV H L Weight [kg] 32/ VAOH-F6-F H9-RA10-AL VAOH-F6-F H9-RA10-AL VAOH-F6-F H9-RA10-AL VAOH-F6-F H9-RA10-AL VAOH-F6-F H9-RA10-AL VAOH-F6-F H9-RA10-AL VAOH-F6-F H9-RA10-AL Subject to change 2015/04

14 PA Product Portfolio System and Component Solutions 14 Subject to change 2015/04

15 PA solutions 15 Subject to change 2015/04