NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK:

Transcription

1 ISO 9001:2008 by L.R. FT4 PN ANSI * NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90 ISO nbr LRC QMS issued by L.R.Q.A. ATEX nbr issued by B.V. PED nbr COV /01 issued by L.R.V. ISO nbr I /1-/2 issued by TÜV On request S.I.L. 3 According to IEC FULL BORE ACCORDING TO ISO On request FIRE SAFE According to ISO ISO-FT CONSTRUCTION IN ACCORDING TO: ANSI B BS EN BALL VALVES "3 WAY WAFER" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE 3 VOIES WAFER PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE KOMPAKTHAHN" VOLLER DURCHGANG 90 WEB SITE:

2 ISO 9001:2008 by L.R. FT4 PN ANSI * VALVOLA A SFERA "3 VIE CORPO PIATTO" PASSAGGIO TOTALE 90 BALL VALVES "3 WAY WAFER" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE "3 VOIES WAFER" PASSAGE INTEGRAL 90 KUGELHÄHNE 3 WEGE KOMPAKTHAHN" VOLLER DURCHGANG 90 CONSTRUCTION IN ACCORDING TO: ANSI B BS EN ACCOPPIAMENTO VALVOLA ATTUATORE CONNECTION VALVE ACTUATOR ACCOUPLEMENT ROBINET- ACTIONNEUR ZUSAMMENBAU KUGELHAHN ANTRIEB POSIZIONI OTTENIBILI OBTAINABLE POSITIONS POSITIONS OBTENABLES MÖGLICHE STELLUNGEN ISO-5211

3 N * 4* 5* * 10* DESCRIZIONE BESCHREIBUNG CORPO BODY CORPS KÖRPER GHIERA INSERT EMBOUT GEWINDEDRUCKRING MATERIALI MATERIALS MATERIAUX WERKSTOFFE N. ASTM A105 ASTM A 182 F316- A479 S ASTM A105 ASTM A 182 F316- A479 S O-RING FKM (VITON) 13 ANELLO SEAL ANNEAU DICHTUNGSRING SEDE SEAT SIEGE SITZRING SFERA BALL BOULE KUGEL DISPOSITIVO ANTISTATICO ANTISTATIC DEVICE CONTACT ANTISTATIQUE ANTISTATIK VORRICHTUNG STELO STEM TIGE SPINDEL BUSSOLA STEM SEAL JOINT TIGE UNTERE SPINDELABDICHTUNG PACCO A V CHEVRON RINGS JOINT A V 3 FACHE DACHMANSCHETTE P.T.F.E. 14 P.T.F.E. 15 ASTM A182 F304-A479 S30400 ASTM A351 CF8 DN 40 ASTM A182 F316-A479 S31600 ASTM A351 CF8M ASTM A479 S31600 ASTM A182 F304 A479 S30400 ASTM A182 F316 A479 S31600 DN DESCRIZIONE BESCHREIBUNG PREMIBUSSOLA PRESSING BUSH PRESSE RONDELLE STOPFBUCHSDRUCKRING MOLLE A TAZZA SPRING WASHERS RONDELLES BELLEVILLE TELLERFEDERN VITE DI FERMO E FERMO PIN AND STOP PIN PLOT ET PLOT D ARRET ANSCHLAGBOLZEN DADO CONTRODADO NUT LOCK NUT ECROU CONTRE-ECROU MUTTER KONTERMUTTER LEVA WRENCH LEVIER HANDHEBEL GHIERA INSERT EMBOUT GEWINDEDRUCKRING 22* ANELLO SEAL ANNEAU DICHTUNGSRING 23* P.T.F.E. 24 P.T.F.E. / GRAFITE P.T.F.E. / GRAPHITE P.T.F.E. / GRAPHITE P.T.F.E. / GRAPHIT MATERIALI MATERIALS MATERIAUX WERKSTOFFE ASTM A479 S31600 C72/50Cr V4 X5CrNi17.7 or X12CrNi17.7 UNI GALVANIZED - GALVANIZED - UNI 3951 A2-70 UNI S GALVANIZED ASTM A UNI 5946 Fe 37 ASTM A GALVANIZED ASTM A105 ASTM A 182 F316- A479 S31600 P.T.F.E. O-RING FKM (VITON) GHIERA INSERT EMBOUT GEWINDEDRUCKRING ASTM A105 ASTM A 182 F316- A479 S31600 * RICAMBI CONSIGLIATI RECOMMENDED SPARE PARTS PIECES DE RECHANGE CONSEILLEES ERSATZTEIL EMPFEHLUNG DIMENSIONI DIMENSION DIMENSIONS ABMESSUNGEN DN A B C E F M5 M5 M5 M5 M6 M6 M8 M8 M8 M10 M10 M10 M12 ISO F03 F03 F03 F03 F05 F05 F07 F07 F07 F10 F10 F10 F12 G H M P 36, , R S ,5 52,5 56, S T Kg Kg STAINLESS STEEL CARBON STEEL STAINLESS STEEL 4 6,5 7, , , ,5 5,8 6, DATI E CARATTERISTICHE SOGGETTI A VARIAZIONI SENZA PREAVVISO SPECIFICATIONS SUBJECT TO MODIFICATION WITHOUT PRIOR NOTICE TOUS DROITS DE MODIFICATION RESERVES KONSTRUKTIONSÄNDERUNGEN VORBEHALTEN ANSI 300 PN ANSI 150 PN DN 100 ANSI 150 S=100,5 S1=240 EXECUTION 17 EXECUTION 18 ADLER SpA BALL VALVES S. STEFANO TICINO (MI) ITALY V.le BORLETTI, 14 Tel. +39/ FAX +39/ adler@adlerspa.com

4 . ISO 9001:2008 by L.R. FT4 PN ANSI * VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90 - BALL VALVES "3 WAY WAFER" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE 3 VOIES WAFER PASSAGE INTEGRAL 90 - KUGELHÄHNE "3 WEGE KOMPAKTHAHN" VOLLER DURCHGANG 90 ESECUZIONI EXECUTIONS EXECUTIONS AUSFÜHRUNGEN ONLY FOR VALVES DN 80 FORO DI BILANCIAMENTO BALANCING HOLE TROU DE BALANCEMENT DRUCKENTLASTUNGSBOHRUNG AVAILABLE ON DN 65 EXECUTION 4-12 EXECUTION 6-16 STANDARD OPTIONAL INDICATORE DI FLUSSO FLOW INDICATOR DN 150 UNIONE CORPO LATERALE CON VITE BODY AND END ASSEMBLING WITH SCREW -MONTAGGIO VITI SCREW ASSEMBLING -MONTAGE VIS EINBAU MIT SCHRAUBEN -STELO ANTI ESPULSIONE -TIGE ANTIEXPULSION -ANTI BLOW OUT STEM -AUSBLASGESICHERTE WELLE DN 150 BREVETTO PATENTED PACCO A V -JOINT A V ANTISTATIC DEVICE -CHEVRON RINGS -3 FACHE DACHMANSCHETE ANTISTATIK VORRICHTUNG BS 5146 BREVETTO PATENTED DOPPIA TENUTA DOUBLE SEALS DOUBLE ETACHEITE DOPPELTE ABDICHTUNG - O RING STELO O RING ON STEM -TIGE AVEC O RING - O RING IM SPINDELBEREICH

5 ISO 9001:2008 by L.R. FT4 PN ANSI * VALVOLE A SFERA "3 VIE" PASSAGGIO TOTALE 90 BALL VALVES "3 VIE" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE" VOLLER DURCHGANG 90 ESECUZIONI EXECUTIONS EXECUTIONS AUSFÜHRUNGEN -PROLUNGA STELO -STEM EXTENSION -TIGE PROLONGEE -SPINDELVERLÄNGERUNG -PARTICOLARI INOX -STAINLESS STEEL DETAILS -ACCESSOIRES EN INOX -EDELSTAHLTEILE -ATTACCO ISO -SYSTEM ISO - ISO CONNECTIONS -ANSCHLUSS ISO AQUILA AEGLE - AIGLE ADLER FIRE SAFE ISO ISO-FT (BS 6755 / API 607) -SFERA CONTENUTA CONTENTS BALL - BOULE CONTENUE -NICHT RAUSRAGENDE KUGEL -FORO DI SCARICO NELLA SFERA -OVERPRESSURE HOLE INTO BALL -TROU DECOMPRESSION DANS LA BOULE -ENTLASTUNGSBOHRUNG IN DER KUGEL -DOPPIA TENUTA -DOUBLE ETANCHEITE DOUBLE SEALS -DOPPELTE ABDICHTUNG GHIERA A BATTUTA -METAL BEATING RING -EMBOUT AVEC BATTUE MECANIQUE -METALLISCHER ANSCHLAG DES GEWINDEDRUCKRINGS - SERVIZIO CRIOGENICO CRYOGENIC SERVICE - SERVICE CRYOGÉNIQUE - TIEFTEMPERATUR SERVICE -FIRE SAFE ISO FT + O RING STELO -FIRE SAFE ISO FT + O RING ON STEM -SECURITE FEU ISO FT + TIGE AVEC O RING -FEUERSICHERE AUSFÜHRUNG ISO FT + O RING IM SPINDELBEREICH VALVOLE IN ACCIAIO AL CARBONIO E ACCIAOIO INOX > DN 100 CARBON STEEL BALL VALVES AND STAINLEES STEEL >DN 100 DN PN VALVOLE IN ACCIAIO INOX STAINLEES STEEL BALL VALVES

6 VITI D ASSEMBLAGGIO PER FT4 ASSEMBLING SCREWS FOR FT4 VIS D ASSEMBLAGE POUR FT4 MONTAGESCHRAUBEN FÜR FT4 N VITI DIMENSIONE N SCREW DIMENSIONS N VIS- DIMENSIONS N SCHRAUBEN ABMESSUNGEN DN PN EUROPEAN NORM * 24 M16 36 M M24 X55 24 M24 X55 36 M24 X M24 X55 24 M24 X55 36 M27 X65 * N 8 per UNI 2223/2229 Rating Ø M M14 ANSI METRIC (STANDARD ADLER) ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ M14 12 M M14 12 M14 12 M20 X55 X60 36 M20 X60 36 M24 X70 Rating Ø /2 X 1 ¼ /2 X 1 ¼ ANSI B1.1 UNC () ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ /2 X 1 ¼ X 1 1/4 12 1/2 X 1 ¼ X 1 1/2 12 1/2 X 1 ¼ X 1 1/2 12 1/2 X 1 1/2 12 3/4 X 1 3/4 X 1 1/2 X 1 3/4 X 1 3/4 X 2 X 1 3/4 X /8 X 1 3/4 X 2 1/4 X 2 X 2 1/4 X /4 X 2 1/4 X /8 X2 3/4 ADLER SpA BALL VALVES S. STEFANO TICINO (MI) ITALY V.le BORLETTI, 14 Tel. +39/ FAX +39/ adler@adlerspa.com

7 ISO 9001:2008 by L.R. FZ4 PN ANSI * NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90 ISO nbr LRC QMS issued by L.R.Q.A. ATEX nbr issued by B.V. PED nbr COV /01 issued by L.R.V. ISO nbr I /1-/2 issued by TÜV On request FIRE SAFE According to ISO ISO-FT FULL BORE ACCORDING TO ISO On request S.I.L. 3 According to IEC CONSTRUCTION IN ACCORDING TO: ANSI B BS EN BALL VALVES "3 WAY WAFER" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE 3 VOIES WAFER PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE KOMPAKTHAHN" VOLLER DURCHGANG 90 WEB SITE:

8 ISO 9001:2008 by L.R. FZ4 PN ANSI * VALVOLA A SFERA "3 VIE CORPO PIATTO" PASSAGGIO TOTALE 90 BALL VALVES "3 WAY WAFER" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE "3 VOIES WAFER" PASSAGE INTEGRAL 90 KUGELHÄHNE 3 WEGE KOMPAKTHAHN" VOLLER DURCHGANG 90 CONSTRUCTION IN ACCORDING TO: ANSI B BS EN ACCOPPIAMENTO VALVOLA ATTUATORE CONNECTION VALVE ACTUATOR ACCOUPLEMENT ROBINET- ACTIONNEUR ZUSAMMENBAU KUGELHAHN ANTRIEB POSIZIONI OTTENIBILI OBTAINABLE POSITIONS POSITIONS OBTENABLES MÖGLICHE STELLUNGEN ISO-5211

9 N. DESCRIZIONE BESCHREIBUNG MATERIALI MATERIALS MATERIAUX WERKSTOFFE N. DESCRIZIONE BESCHREIBUNG MATERIALI MATERIALS MATERIAUX WERKSTOFFE 1 CORPO BODY CORPS KÖRPER ASTM A105 ASTM A 182 F316- A479 S * BUSSOLA STEM SEAL JOINT TIGE UNTERE SPINDELABDICHTUNG P.T.F.E. 2 GHIERA INSERT EMBOUT GEWINDEDRUCKRING ASTM A105 ASTM A 182 F316- A479 S * PACCO A V CHEVRON RINGS JOINT A V 3 FACHE DACHMANSCHETTE P.T.F.E. / GRAFITE P.T.F.E. / GRAPHITE P.T.F.E. / GRAPHITE P.T.F.E. / GRAPHIT 3* O-RING FKM (VITON) 11 PREMIBUSSOLA PRESSING BUSH PRESSE RONDELLE STOPFBUCHSDRUCKRING ASTM A479 S * ANELLO SEAL ANNEAU DICHTUNGSRING P.T.F.E. 12 MOLLE A TAZZA SPRING WASHERS RONDELLES BELLEVILLE TELLERFEDERN C72/50Cr V4 X5CrNi17.7 or X12CrNi17.7 GALVANIZED - 5* SEDE SEAT SIEGE SITZRING R.P.T.F.E. 13 VITE DI FERMO E FERMO PIN AND STOP PIN PLOT E PLOT D ARRET ANSCHLAGBOLZEN UNI UNI 3951 A2-70 GALVANIZED - 6 SFERA BALL BOULE KUGEL ASTM A182 F304-A479 S30400 ASTM A351 CF8 DN 40 ASTM A182 F316-A479 S31600 ASTM A351 CF8M 14 UNI S ASTM A GALVANIZED 7 DISPOSITIVO ANTISTATICO ANTISTATIC DEVICE CONTACT ANTISTATIQUE ANTISTATIK VORRICHTUNG ASTM A479 S LEVA WRENCH LEVIER HANDHEBEL UNI 5946 Fe 37 ASTM A GALVANIZED 8 STELO STEM TIGE SPINDEL ASTM A182 F304 A479 S30400 ASTM A182 F316 A479 S31600 DN * RICAMBI CONSIGLIATI RECOMMENDED SPARE PARTS PIECES DE RECHANGE CONSEILLEES ERSATZTEIL EMPFEHLUNG DIMENSIONI DIMENSION DIMENSIONS ABMESSUNGEN DN A B C E F M5 M5 M5 M5 M6 M6 M8 M8 M8 M10 M10 M10 M12 ISO F03 F03 F03 F03 F05 F05 F07 F07 F07 F10 F10 F10 F12 G H M P 36, , R S ,5 52,5 56, S T Kg Kg STAINLESS STEEL CARBON STEEL STAINLESS STEEL 4 6,5 7, , , ,5 5,8 6, DATI E CARATTERISTICHE SOGGETTI A VARIAZIONI SENZA PREAVVISO SPECIFICATIONS SUBJECT TO MODIFICATION WITHOUT PRIOR NOTICE TOUS DROITS DE MODIFICATION RESERVES KONSTRUKTIONSÄNDERUNGEN VORBEHALTEN ANSI 300 PN ANSI 150 PN DN 100 ANSI 150 S=100,5 S1=240 EXECUTION 17 EXECUTION 18 ADLER SpA BALL VALVES S. STEFANO TICINO (MI) ITALY V.le BORLETTI, 14 Tel. +39/ FAX +39/ adler@adlerspa.com

10 ISO 9001:2008 by L.R. FZ4 PN ANSI * VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90 - BALL VALVES "3 WAY WAFER" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE 3 VOIES WAFER PASSAGE INTEGRAL 90 - KUGELHÄHNE "3 WEGE KOMPAKTHAHN" VOLLER DURCHGANG 90 ESECUZIONI EXECUTIONS EXECUTIONS AUSFÜHRUNGEN ONLY FOR VALVES DN 50 FORO DI BILANCIAMENTO BALANCING HOLE TROU DE BALANCEMENT DRUCKENTLASTUNGSBOHRUNG AVAILABLE ON DN 40 EXECUTION 4-12 EXECUTION 6-16 STANDARD OPTIONAL INDICATORE DI FLUSSO FLOW INDICATOR DN 150 UNIONE CORPO LATERALE CON VITE BODY AND END ASSEMBLING WITH SCREW -MONTAGGIO VITI SCREW ASSEMBLING -MONTAGE VIS EINBAU MIT SCHRAUBEN -STELO ANTI ESPULSIONE -TIGE ANTIEXPULSION -ANTI BLOW OUT STEM -AUSBLASGESICHERTE WELLE DN 150 BREVETTO PATENTED PACCO A V -JOINT A V ANTISTATIC DEVICE -CHEVRON RINGS -3 FACHE DACHMANSCHETE ANTISTATIK VORRICHTUNG BS 5146 BREVETTO PATENTED DOPPIA TENUTA DOUBLE SEALS DOUBLE ETACHEITE DOPPELTE ABDICHTUNG - O RING STELO O RING ON STEM -TIGE AVEC O RING - O RING IM SPINDELBEREICH

11 ISO 9001:2008 by L.R. FZ4 PN ANSI * VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90 - BALL VALVES "3 WAY WAFER" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE 3 VOIES WAFER PASSAGE INTEGRAL 90 - KUGELHÄHNE "3 WEGE KOMPAKTHAHN" VOLLER DURCHGANG 90 ESECUZIONI EXECUTIONS EXECUTIONS AUSFÜHRUNGEN -PROLUNGA STELO -STEM EXTENSION -TIGE PROLONGEE -SPINDELVERLÄNGERUNG -PARTICOLARI INOX -STAINLESS STEEL DETAILS -ACCESSOIRES EN INOX -EDELSTAHLTEILE -ATTACCO ISO -SYSTEM ISO - ISO CONNECTIONS -ANSCHLUSS ISO FIRE SAFE ISO ISO-FT (BS 6755 / API 607) -SFERA CONTENUTA CONTENTS BALL - BOULE CONTENUE -NICHT RAUSRAGENDE KUGEL -TENUTE INTEGRALE -POCKETLESS SEATS -TENUE INTEGRALE -TOTRAUMARM -P.T.F.E. / R.T.F.E. ADLER COMPANY -DOPPIA TENUTA -DOUBLE ETANCHEITE DOUBLE SEALS -DOPPELTE ABDICHTUNG GHIERA A BATTUTA -METAL BEATING RING -EMBOUT AVEC BATTUE MECANIQUE -METALLISCHER ANSCHLAG DES GEWINDEDRUCKRINGS - SERVIZIO CRIOGENICO CRYOGENIC SERVICE - SERVICE CRYOGÉNIQUE - TIEFTEMPERATUR SERVICE -FIRE SAFE ISO FT + O RING STELO -FIRE SAFE ISO FT + O RING ON STEM -SECURITE FEU ISO FT + TIGE AVEC O RING -FEUERSICHERE AUSFÜHRUNG ISO FT + O RING IM SPINDELBEREICH VALVOLE IN ACCIAIO AL CARBONIO E ACCIAIO INOX DN 80 CARBON STEEL BALL VALVES AND STAINLEES STEEL DN 80 DN PN VALVOLE IN ACCIAIO INOX STAINLEES STEEL BALL VALVES

12 VITI D ASSEMBLAGGIO PER FZ4 ASSEMBLING SCREWS FOR FZ4 VIS D ASSEMBLAGE POUR FZ4 MONTAGESCHRAUBEN FÜR FZ4 N VITI DIMENSIONE N SCREW DIMENSIONS N VIS- DIMENSIONS N SCHRAUBEN ABMESSUNGEN DN PN EUROPEAN NORM * 24 M16 36 M M24 X55 24 M24 X55 36 M24 X M24 X55 24 M24 X55 36 M27 X65 * N 8 per UNI 2223/2229 Rating Ø M M14 ANSI METRIC (STANDARD ADLER) ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ M14 12 M M14 12 M14 12 M20 X55 X60 36 M20 X60 36 M24 X70 Rating Ø /2 X 1 ¼ /2 X 1 ¼ ANSI B1.1 UNC () ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ /2 X 1 ¼ X 1 1/4 12 1/2 X 1 ¼ X 1 1/2 12 1/2 X 1 ¼ X 1 1/2 12 1/2 X 1 1/2 12 3/4 X 1 3/4 X 1 1/2 X 1 3/4 X 1 3/4 X 2 X 1 3/4 X /8 X 1 3/4 X 2 1/4 X 2 X 2 1/4 X /4 X 2 1/4 X /8 X2 3/4 ADLER SpA BALL VALVES S. STEFANO TICINO (MI) ITALY V.le BORLETTI, 14 Tel. +39/ FAX +39/ adler@adlerspa.com

13 ISO 9001:2008 by L.R. FT6 PN NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE 90 ISO nbr LRC QMS issued by L.R.Q.A. ATEX nbr issued by B.V. PED nbr COV /01 issued by L.R.V. ISO nbr I /1-/2 issued by TÜV On request S.I.L. 3 According to IEC On request FIRE SAFE According to ISO ISO-FT FULL BORE ACCORDING TO ISO CONSTRUCTION IN ACCORDING TO: DIN 3202 M3 ANSI B ISO BALL VALVES "3 WAY" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE" VOLLER DURCHGANG 90 WEB SITE:

14 ISO 9001:2008 by L.R. FT6 PN VALVOLA A SFERA "3 VIE" PASSAGGIO TOTALE 90 BALL VALVES "3 WAY" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE" VOLLER DURCHGANG 90 CONSTRUCTION IN ACCORDING TO: DIN 3202 M3 - ANSI B16.34 ISO ACCOPPIAMENTO VALVOLA ATTUATORE CONNECTION VALVE ACTUATOR ACCOUPLEMENT ROBINET- ACTIONNEUR ZUSAMMENBAU KUGELHAHN ANTRIEB POSIZIONI OTTENIBILI OBTAINABLE POSITIONS POSITIONS OBTENIBLES MÖGLICHE STELLUNGEN ISO-5211

15 N. DESCRIZIONE BESCHREIBUNG MATERIALI MATERIALS MATERIAUX WERKSTOFFE N. DESCRIZIONE BESCHREIBUNG MATERIALI MATERIALS MATERIAUX WERKSTOFFE 1 CORPO BODY CORPS KÖRPER ASTM A105 ASTM A 182 F316- A479 S PREMIBUSSOLA PRESSING BUSH PRESSE RONDELLE STOPFBUCHSDRUCKRING ASTM A479 S GHIERA INSERT EMBOUT GEWINDEDRUCKRING ASTM A105 ASTM A 182 F316- A479 S MOLLE A TAZZA SPRING WASHERS RONDELLES BELLEVILLE TELLERFEDERN C72/50Cr V4 X5CrNi17.7 or X12CrNi17.7 GALVANIZED - 4* ANELLO SEAL ANNEAU DICHTUNGSRING P.T.F.E. 13 VITE DI FERMO E FERMO PIN AND STOP PIN PLOT ET PLOT D ARRET ANSCHLAGBOLZEN UNI UNI 3951 A2-70 GALVANIZED - 5* SEDE SEAT SIEGE SITZRING P.T.F.E. 14 DADO CONTRODADO NUT LOCK NUT ECROU CONTRE-ECROU MUTTER KONTERMUTTER UNI S GALVANIZED ASTM A SFERA BALL BOULE KUGEL ASTM A182 F304-A479 S30400 ASTM A351 CF8 1½ ASTM A182 F316-A479 S31600 ASTM A351 CF8M 15 UNI 5946 Fe 37 ASTM A UNI 5946 Fe 37 ASTM A GALVANIZED 7 DISPOSITIVO ANTISTATICO ANTISTATIC DEVICE CONTACT ANTISTATIQUE ANTISTATIK VORRICHTUNG ASTM A479 S GHIERA INSERT EMBOUT GEWINDEDRUCKRING ASTM A105 ASTM A 182 F316- A479 S STELO STEM TIGE SPINDEL ASTM A182 F304 A479 S30400 ASTM A182 F316 A479 S ½ 22* ANELLO SEAL ANNEAU DICHTUNGSRING P.T.F.E. 9* BUSSOLA STEM SEAL JOINT TIGE UNTERE SPINDELABDICHTUNG P.T.F.E. 24 GHIERA INSERT EMBOUT GEWINDEDRUCKRING ASTM A105 ASTM A 182 F316- A479 S * PACCO A V CHEVRON RINGS JOINT A V 3 FACHE DACHMANSCHETTE P.T.F.E. / GRAFITE P.T.F.E. / GRAPHITE P.T.F.E. / GRAPHITE P.T.F.E. / GRAPHIT * RICAMBI CONSIGLIATI RECOMMENDED SPARE PARTS PIECES DE RECHANGE CONSEILLEES ERSATZTEIL EMPFEHLUNG DIMENSIONI DIMENSION DIMENSIONS ABMESSUNGEN ¼ ⅜ ½ ¾ 1 1¼ 1½ 2 2½ A B C E F M5 M5 M5 M5 M5 M5 M6 M6 ISO F03 F03 F03 F03 F03 F03 F05 F05 G H L 24,5 24, , ,5 51,5 60,5 M P 21,5 21, , R S T PN Kg 1,5 1,5 2,3 3,1 4,4 6,2 9,5 15 CARBON STEEL STAINLESS STEEL Kg 2 4 8,8 STAINLESS STEEL DATI E CARATTERISTICHE SOGGETTI A VARIAZIONI SENZA PREAVVISO SPECIFICATIONS SUBJECT TO MODIFICATION WITHOUT PRIOR NOTICE TOUS DROITS DE MODIFICATION RESERVES KONSTRUKTIONSÄNDERUNGEN VORBEHALTEN EXECUTION 17 EXECUTION 18 Ø ¼ ⅜ SEAT IN R.P.T.F.E. ADLER SpA BALL VALVES S. STEFANO TICINO (MI) ITALY V.le BORLETTI, 14 Tel. +39/ FAX +39/ adler@adlerspa.com

16 ISO 9001:2008 by L.R. FT6 PN VALVOLE A SFERA "3 VIE" PASSAGGIO TOTALE 90 BALL VALVES "3 VIE" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE" VOLLER DURCHGANG 90 ESECUZIONI EXECUTIONS EXECUTIONS AUSFÜHRUNGEN ONLY FOR VALVES DN 50 FORO DI BILANCIAMENTO BALANCING HOLE TROU DE BALANCEMENT DRUCKENTLASTUNGSBOHRUNG AVAILABLE ON DN 40 EXECUTION 4-12 EXECUTION 6-16 STANDARD OPTIONAL SEE TABLE 23 FOR OF THREAD INDICATORE DI FLUSSO FLOW INDICATOR ADLER UNA GAMMA COMPLETA PRIVILEGIANDO LA QUALITA A COMPLETE RANGE PRIVILEGING THE QUALITY -STELO ANTI ESPULSIONE -TIGE ANTIEXPULSION -ANTI BLOW OUT STEM -AUSBLASGESICHERTE WELLE BREVETTO PATENTED ½ 2 -PACCO A V -JOINT A V ANTISTATIC DEVICE -CHEVRON RINGS -3 FACHE DACHMANSCHETE ANTISTATIK VORRICHTUNG BS MANIGLIA OVALE - OVAL HANDLE -LEVIER OVAL HANDHEBEL IN OVALFORM - O RING STELO O RING ON STEM -TIGE AVEC O RING - O RING IM SPINDELBEREICH

17 ISO 9001:2008 by L.R. FT6 PN VALVOLE A SFERA "3 VIE" PASSAGGIO TOTALE 90 BALL VALVES "3 VIE" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE" VOLLER DURCHGANG 90 ESECUZIONI EXECUTIONS EXECUTIONS BESCHREIBUNG -PROLUNGA STELO -STEM EXTENSION -TIGE PROLONGEE -SPINDELVERLÄNGERUNG -PARTICOLARI INOX -STAINLESS STEEL DETAILS -ACCESSOIRES EN INOX -EDELSTAHLTEILE -ATTACCO ISO -SYSTEM ISO - ISO CONNECTIONS -ANSCHLSS ISO AQUILA EAGLE AIGLE ADLER FIRE SAFE ISO ISO-FT (BS 6755 / API 607) -SFERA CONTENUTA CONTENTS BALL - BOULE CONTENUE -NICHT RAUSRAGENDE KUGEL -FORO DI SCARICO NELLA SFERA -OVERPRESSURE HOLE INTO BALL -TROU DECOMPRESSION DANS LA BOULE -ENTLASTUNGSBOHRUNG IN DER KUGEL -ANELLO CONTENUTO CONTAINED SEAL -ANNEAU CONTENU -DICHTRING GEKAMMERT GHIERA A BATTUTA -METAL BEATING RING -EMBOUT AVEC BATTUE MECANIQUE -METALLISCHER ANSCHLAG DES GEWINDEDRUCKRINGS - SERVIZIO CRIOGENICO CRYOGENIC SERVICE - SERVICE CRYOGÉNIQUE - TIEFTEMPERATUR SERVICE CERTIFY ISO 9001:2008 VALVOLE IN ACCIAIO INOX STAINLESS STEEL BALL VALVES ¼ -⅜ -¾ - 1¼ -2 VALVOLE IN ACCIAIO AL CARBONIO CARBON STEEL BALL VALVES ½ -1-1½ VALVOLE IN ACCIAIO INOX STAINLEES STEEL BALL VALVES

18 IN ACCORDANCE TO ISO CARATTERISTICHE DEL FILETTO THREAD FEATURES FILETAGES CARACTÉRISTIQUES GEWINDE KENNDATEN Designation of thread size Number of threads in 25.4 mm Pitch Height of thread Major Diameters of gauges plane Pitch Minor P h d d 2 d 1 Nominal Gauges length (external threads) Tolerance ±t 1 /2 2) Turns of thread Max. Min. Tolerance on position of gauge plan on internal thread Tolerance ±t 1 /2 2) Turns of thread Length of useful external thread not less than For nominal gauge length For maximum gauge length For minimum gauge length Fitting allowance ¼ 19 1,337 0,856 13,15 12,30 11,44 6 1,3 1 7,3 4,7 1,7 1 ¼ 9,7 11 8,4 3,7 2 ¾ ±0,104 3/8 19 1,337 0,856 16,66 15,80 14,95 6,4 1,3 1 7,7 5,1 1,7 1 ¼ 10,1 11,4 8,8 3,7 2 ¾ ±0,104 ½ 14 1,814 1,162 20,95 19,79 18,63 8,2 1, ,4 2,3 1 ¼ 13, ,4 5 2 ¾ ±0,142 ¾ 14 1,814 1,162 26,44 25,27 24,11 9,5 1,8 1 11,3 7,7 2,3 1 ¼ 14,5 16,3 12,7 5 2 ¾ ±0, ,309 1,479 33,24 31,77 30,29 10,4 2,3 1 12,7 8,1 2,9 1 ¼ 16,8 19,1 14,5 6,4 2 ¾ ±0,180 1 ¼ 11 2,309 1,479 41,91 40,43 38,95 12,7 2, ,4 2,9 1 ¼ 19,1 21,4 16,8 6,4 2 ¾ ±0,180 1 ½ 11 2,309 1,479 47,80 46,32 44,84 12,7 2, ,4 2,9 1 ¼ 19,1 21,4 16,8 6,4 2 ¾ ±0, ,309 1,479 59,61 58,13 56,65 15,9 2,3 1 18,2 13,6 2,9 1 ¼ 23,4 25,7 21,1 7,5 3 ¼ ±0,180 2) Turns of thread Diameter tolerance on parallel internal threads IN ACCORDANCE TO ANSI B Nominal Pipe Size O.D. of Pipe (D) Threads/i nch (n) Pitch of threads (P) Pitch diam. at beginning of external thread (E 0 ) Handtight engagement Effective thread, external Length 2 (L 1 ) Diam. 3 Length 4 (L 2 ) Diam. 5 inch threads (E 1 ) inch threads (E 2 ) ¼ 0, , , ,2278 4,1 0, , , /8 0, , , ,240 4,32 0, , ,63750 ½ 0, , , ,320 4,48 0, , ,79179 ¾ 1, , , ,339 4,75 0, , , ,315 11,5 0,0896 1, ,400 4,6 1, , , ¼ 1,660 11,5 0,0896 1, ,420 4,83 1, , , ½ 1,900 11,5 0,0896 1, ,420 4,83 1, , , ,375 11,5 0,0896 2, ,436 5,01 2, , ,31630 ADLER SpA BALL VALVES S. STEFANO TICINO (MI) ITALY V.le BORLETTI, 14 Tel. +39/ FAX +39/ adler@adlerspa.com

19 ISO 9001:2008 by L.R. FZ6 PN NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE 90 ISO nbr LRC QMS issued by L.R.Q.A. ATEX nbr issued by B.V. PED nbr COV /01 issued by L.R.V. ISO nbr I /1-/2 issued by TÜV On request S.I.L. 3 According to IEC FULL BORE ACCORDING TO ISO CONSTRUCTION IN ACCORDING TO: DIN 3202 M3 ANSI B ISO On request FIRE SAFE According to ISO ISO-FT BALL VALVES "3 WAY" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE" VOLLER DURCHGANG 90 WEB SITE:

20 ISO 9001:2008 by L.R. FZ6 PN VALVOLA A SFERA "3 VIE" PASSAGGIO TOTALE 90 BALL VALVES "3 WAY" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE" VOLLER DURCHGANG 90 CONSTRUCTION IN ACCORDING TO: DIN 3202 M3 ANSI ISO ACCOPPIAMENTO VALVOLA ATTUATORE CONNECTION VALVE ACTUATOR ACCOUPLEMENT ROBINET- ACTIONNEUR ZUSAMMENBAU KUGELHAHN ANTRIEB POSIZIONI OTTENIBILI OBTAINABLE POSITIONS POSITIONS OBTENABLES MÖGLICHE STELLUNGEN ISO-5211

21 N * 5* DESCRIZIONE BESCHREIBUNG CORPO BODY CORPS KÖRPER GHIERA INSERT EMBOUT GEWINDEDRUCKRING ANELLO SEAL ANNEAU DICHTUNGSRING SEDE SEAT SIEGE SITZRING SFERA BALL BOULE KUGEL DISPOSITIVO ANTISTATICO ANTISTATIC DEVICE CONTACT ANTISTATIQUE ANTISTATIK VORRICHTUNG STELO STEM TIGE SPINDEL MATERIALI MATERIALS MATERIAUX WERKSTOFFE N. ASTM A105 ASTM A 182 F316- A479 S * ASTM A105 ASTM A 182 F316- A479 S * 11 P.T.F.E. 12 P.T.F.E. 13 ASTM A182 F304-A479 S30400 ASTM A351 CF8 1½ ASTM A182 F316-A479 S31600 ASTM A351 CF8M ASTM A479 S ASTM A182 F304 A479 S30400 ASTM A182 F316 A479 S ½ DESCRIZIONE BESCHREIBUNG BUSSOLA STEM SEAL JOINT TIGE UNTERE SPINDELABDICHTUNG PACCO A V CHEVRON RINGS JOINT A V 3 FACHE DACHMANSCHETTE PREMIBUSSOLA PRESSING BUSH PRESSE RONDELLE STOPFBUCHSDRUCKRING MOLLE A TAZZA SPRING WASHERS RONDELLES BELLEVILLE TELLERFEDERN VITE DI FERMO E FERMO PIN AND STOP PIN PLOT ET PLOT D ARRET ANSCHLAGBOLZEN 14 UNI S ASTM A LEVA WRENCH LEVIER HANDHEBEL MATERIALI MATERIALS MATERIAUX WERKSTOFFE P.T.F.E. P.T.F.E. / GRAFITE P.T.F.E. / GRAPHITE P.T.F.E. / GRAPHITE P.T.F.E. / GRAPHIT ASTM A479 S31600 C72/50Cr V4 X5CrNi17.7 or X12CrNi17.7 UNI UNI 3951 A2-70 GALVANIZED UNI 5946 Fe 37 ASTM A * RICAMBI CONSIGLIATI RECOMMENDED SPARE PARTS PIECES DE RECHANGE CONSEILLEES ERSATZTEIL EMPFEHLUNG GALVANIZED - GALVANIZED - GALVANIZED DIMENSIONI DIMENSION DIMENSIONS ABMESSUNGEN ¼ ⅜ ½ ¾ 1 1¼ 1½ 2 2½ A B C E F M5 M5 M5 M5 M5 M5 M6 M6 ISO F03 F03 F03 F03 F03 F03 F05 F05 G H L , ,5 59,5 64,5 77 M P 21,5 21, , R S T PN Kg 1,5 1,5 2,3 3,1 4,4 6,2 9,5 15 CARBON STEEL STAINLESS STEEL Kg 2 4 8,8 STAINLESS STEEL DATI E CARATTERISTICHE SOGGETTI A VARIAZIONI SENZA PREAVVISO SPECIFICATIONS SUBJECT TO MODIFICATION WITHOUT PRIOR NOTICE TOUS DROITS DE MODIFICATION RESERVES KONSTRUKTIONSÄNDERUNGEN VORBEHALTEN EXECUTION 17 EXECUTION 18 Ø ¼ ⅜ SEAT IN R.P.T.F.E. ADLER SpA BALL VALVES S. STEFANO TICINO (MI) ITALY V.le BORLETTI, 14 Tel. +39/ FAX +39/ adler@adlerspa.com

22 ISO 9001:2008 by L.R. FZ6 PN VALVOLA A SFERA "3 VIE" PASSAGGIO TOTALE 90 BALL VALVES "3 WAY" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE" VOLLER DURCHGANG 90 ESECUZIONI EXECUTIONS EXECUTIONS AUSFÜHRUNGEN ONLY FOR VALVES DN 50 FORO DI BILANCIAMENTO BALANCING HOLE TROU DE BALANCEMENT DRUCKENTLASTUNGSBOHRUNG AVAILABLE ON DN 40 EXECUTION 4-12 EXECUTION6-16 STANDARD OPTIONAL SEE TABLE 23 FOR OF THREAD INDICATORE DI FLUSSO FLOW INDICATOR -STELO ANTI ESPULSIONE -TIGE ANTIEXPULSION -ANTI BLOW OUT STEM -AUSBLASGESICHERTE WELLE BREVETTO PATENTED ½ 2 -PACCO A V -JOINT A V ANTISTATIC DEVICE -CHEVRON RINGS -3 FACHE DACHMANSCHETE ANTISTATIK VORRICHTUNG BS MANIGLIA OVALE - OVAL HANDLE -LEVIER OVAL HANDHEBEL IN OVALFORM - O RING STELO O RING ON STEM -TIGE AVEC O RING - O RING IM SPINDELBEREICH

23 ISO 9001:2008 by L.R. FZ6 PN VALVOLA A SFERA "3 VIE" PASSAGGIO TOTALE 90 BALL VALVES "3 WAY" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE" VOLLER DURCHGANG 90 ESECUZIONI EXECUTIONS EXECUTIONS AUSFÜHRUNGEN -PROLUNGA STELO -STEM EXTENSION -TIGE PROLONGEE -SPINDELVERLÄNGERUNG -PARTICOLARI INOX -STAINLESS STEEL DETAILS -ACCESSOIRES EN INOX -EDELSTAHLTEILE -ATTACCO ISO -SYSTEM ISO - ISO CONNECTIONS -ANSCHLUSS ISO FIRE SAFE ISO ISO-FT (BS 6755 / API 607) -SFERA CONTENUTA CONTENTS BALL - BOULE CONTENUE -NICHT RAUSRAGENDE KUGEL -TENUTE INTEGRALE -POCKETLESS SEATS -TENUE INTEGRALE -TOTRAUMARM -P.T.F.E. / R.T.F.E. AQUILA EAGLE AIGLE ADLER -ANELLO CONTENUTO CONTAINED SEAL -ANNEAU CONTENU -DICHTRING GEKAMMERT GHIERA A BATTUTA -METAL BEATING RING -EMBOUT AVEC BATTUE MECANIQUE -METALLISCHER ANSCHLAG DES GEWINDEDRUCKRINGS - SERVIZIO CRIOGENICO CRYOGENIC SERVICE - SERVICE CRYOGÉNIQUE - TIEFTEMPERATUR SERVICE ADLER COMPANY VALVOLE IN ACCIAIO INOX STAINLESS STEEL BALL VALVES ¼ -⅜ -¾ - 1¼ -2 VALVOLE IN ACCIAIO AL CARBONIO CARBON STEEL BALL VALVES ½ -1-1½ VALVOLE IN ACCIAIO INOX STAINLEES STEEL BALL VALVES

24 IN ACCORDANCE TO ISO CARATTERISTICHE DEL FILETTO THREAD FEATURES FILETAGES CARACTÉRISTIQUES GEWINDE KENNDATEN Designation of thread size Number of threads in 25.4 mm Pitch Height of thread Major Diameters of gauges plane Pitch Minor P h d d 2 d 1 Nominal Gauges length (external threads) Tolerance ±t 1 /2 2) Turns of thread Max. Min. Tolerance on position of gauge plan on internal thread Tolerance ±t 1 /2 2) Turns of thread Length of useful external thread not less than For nominal gauge length For maximum gauge length For minimum gauge length Fitting allowance ¼ 19 1,337 0,856 13,15 12,30 11,44 6 1,3 1 7,3 4,7 1,7 1 ¼ 9,7 11 8,4 3,7 2 ¾ ±0,104 3/8 19 1,337 0,856 16,66 15,80 14,95 6,4 1,3 1 7,7 5,1 1,7 1 ¼ 10,1 11,4 8,8 3,7 2 ¾ ±0,104 ½ 14 1,814 1,162 20,95 19,79 18,63 8,2 1, ,4 2,3 1 ¼ 13, ,4 5 2 ¾ ±0,142 ¾ 14 1,814 1,162 26,44 25,27 24,11 9,5 1,8 1 11,3 7,7 2,3 1 ¼ 14,5 16,3 12,7 5 2 ¾ ±0, ,309 1,479 33,24 31,77 30,29 10,4 2,3 1 12,7 8,1 2,9 1 ¼ 16,8 19,1 14,5 6,4 2 ¾ ±0,180 1 ¼ 11 2,309 1,479 41,91 40,43 38,95 12,7 2, ,4 2,9 1 ¼ 19,1 21,4 16,8 6,4 2 ¾ ±0,180 1 ½ 11 2,309 1,479 47,80 46,32 44,84 12,7 2, ,4 2,9 1 ¼ 19,1 21,4 16,8 6,4 2 ¾ ±0, ,309 1,479 59,61 58,13 56,65 15,9 2,3 1 18,2 13,6 2,9 1 ¼ 23,4 25,7 21,1 7,5 3 ¼ ±0,180 2) Turns of thread Diameter tolerance on parallel internal threads IN ACCORDANCE TO ANSI B Nominal Pipe Size O.D. of Pipe (D) Threads/i nch (n) Pitch of threads (P) Pitch diam. at beginning of external thread (E 0 ) Handtight engagement Effective thread, external Length 2 (L 1 ) Diam. 3 Length 4 (L 2 ) Diam. 5 inch threads (E 1 ) inch threads (E 2 ) ¼ 0, , , ,2278 4,1 0, , , /8 0, , , ,240 4,32 0, , ,63750 ½ 0, , , ,320 4,48 0, , ,79179 ¾ 1, , , ,339 4,75 0, , , ,315 11,5 0,0896 1, ,400 4,6 1, , , ¼ 1,660 11,5 0,0896 1, ,420 4,83 1, , , ½ 1,900 11,5 0,0896 1, ,420 4,83 1, , , ,375 11,5 0,0896 2, ,436 5,01 2, , ,31630 ADLER SpA BALL VALVES S. STEFANO TICINO (MI) ITALY V.le BORLETTI, 14 Tel. +39/ FAX +39/ adler@adlerspa.com