JUMO dtrans 02-Series. Compact transmitter/controller series for liquid analysis

Transcription

1 JUMO dtrans 02-Series Advantages Instrument version Sensors JUMO dtrans ph / CR / AS Measurement display Key features Compact transmitter/controller series for liquid analysis The advantages in a nutshell Transmitter, controller, indicator and data logger, all in one Large, backlit graphic LC display Simple operation in plain text, multiple languages available Extremely compact design: panel unit measures just 96 x 48 x 90 mm (W x H x D) RS422/485 (Modbus) or PROFIBUS-DP interface PC setup program for device parameterization and data analysis Optionally available as surface mount housing with IP65 protection rating c-ul-approval High-quality controller functions (pulse length and pulse frequency controller, programmable with P, PI, PD and PID action, three-point step controller) Block structure 1 main input Measured variable (e.g. ph value), ORP, ammonia concentration, conductivity, resistance, free chlorine, chlorine dioxide, ozone, hydrogen peroxide, peracetic acid, flow rate, liquid level, and much more. PC setup interface Device parameterization Saving and loading device configurations Data logger Retrieving data Graphical representation of data Data export 1 analog input Universal input for Pt100/Pt1000, NTC, resistance transmitter or standard signal 0(4) to 20 ma 2 binary inputs For floating contacts Functions: Measuring range selection Activation of manual or hold mode Freeze measured value Keyboard inhibit Level inhibit Parameter set selection Flow rate meter (frequency output): Slow Speed input up to 300 Hz High Speed input up to 10 khz Transmitter/Controller 2 relays (changeover) 230 V AC, 5 A Power supply for 2-wire transmitter 17 V DC, 20 ma Three optional slots, fitted optionally as: Relays, double relays, semiconductor relays (Triac) Photo MOS relay (wear-free semiconductor switches) Analog output card 0(4) to 20mA, 0 to 10V Analog input card 0(4) to 20mA, 0 to 10V Digital interface RS422/485 (Modbus) PROFIBUS-DP interface Data logger Power supply AC 110 to 240 V 15/+10 % 20 to 30 V AC/DC 4 5

2 Instrument version JUMO dtrans ph 02 (Type ) For measuring ph values, redox voltage (ORP) and ammonia concentration Measuring and control range ph 2.00 to ORP 1500 to mv Ammonia 0 to 9999 mg/l (ppm) Asymmetrical / symmetrical high-resistance input One-point, two-point and three-point calibration Electrode monitoring is possible Flow rate measurement integrated JUMO dtrans CR 02 (Type ) For measuring conductive conductivity or specific resistance Two and four-electrode sensors can be connected Measuring and control range 0,005 µs/cm to 600 ms/cm 0,005 kω x cm to 20 MΩ x cm Temperature compensation integrated (linear, natural water, ASTM D ) USP function (pharmaceutical water), Ph. Eur., ultrapure water Electrode monitoring is possible (deposit detection) TDS (Total Dissolved Solids) function integrated Flow rate measurement integrated JUMO dtrans AS 02 (Type ) For measuring disinfectants (such as free chlorine, chlorine dioxide, ozone, hydrogen peroxide, peracetic acid), liquid levels (hydrostatic) Standard signal input 0/4 to ma or 0 to 10 V freely programmable and scalable Integrated power supply for two-wire transmitter Unit of measure can be selected or set with the setup program Display scope 0 to 9999 digits Decimal place adjustable

3 JUMO mtron T Your System The new scalable measuring, control and automation system The modular design JUMO mtron T uses an Ethernet based system bus and an integrated PLC also for decentralized automation tasks. This measuring, control and automation system, suitable for a wide range of applications, reflects the combination of JUMO's extensive process expertise with a simple, user orientated and user friendly configuration concept. The heart of JUMO mtron T is the central unit that provides a process image for up to 30 input/output modules. The CPU is equipped with higher ranking communication interfaces including a web server. For individual control applications, the system has a PLC (CoDeSys V3), program transmitter and limit value monitoring functions, as well as math and logics modules. Available input and output modules include a multi-channel controller module, analog input modules with 4 and 8 channels, a relay module in 4-channel version, as well as the freely configurable digital input/output module with 12 channels. The 4-channel analog input module is equipped with four electrically isolated universal analog inputs for thermocouples, RTD temperature probes and standard signals. This allows precise recording and digitization of a variety of process variables with the same hardware, project planning, material planning and stockkeeping, with the respective cost benefits involved. PI 1753 (1/3)

4 Press release 1753 JUMO mtron T Your System The new scalable measuring, control and automation system Each multi-channel controller module supports up to four standalone PID control circuits with fast cycle time and proven control algorithm without encumbering the central unit. The system allows the simultaneous operation of up to 120 control circuits, making it possible to meet the requirements of complex control processes. The inputs and outputs of each controller module can be individually extended and adapted using optional slots. In addition to visualization, the multi-functional panel allows convenient operation of the controller and program transmitter. It also permits user-dependent access to parameter and configuration data of the overall system. As a special feature, a full paperless recorder including web server is provided for performing the recording functions. Proven PC programs are available for read-out and evaluation of the historic data. Screen masks, predefined as standard, substantially reduce start-up times. The configuration of the hardware and software, as well as the configuration of the measured value recording and control tasks are performed with the setup program. Using the editors of CoDeSys as per IEC , users can create their own highly efficient automation solutions. The entire application is recorded in a project file, considerably simplifying project administration and version management. Thanks to its high flexibility and user friendly structure, JUMO mtron T, as a measuring, control or automation system, can be easily and conveniently adapted to different applications so that it can be used in a large variety of industries. PI 1753 (2/3)

5 Press release 1753 JUMO mtron T Your System The new scalable measuring, control and automation system Fig. 1 System structure Fig. 2 Multi-functional panel with module mounted on DIN rail, currently being created by the Advertising Dept.) Datei: JUMO_PI_1753_Systemaufbau.jpg Datei: JUMO_PI_1753.jpg PI 1753 (3/4)

6 Press release 1753 JUMO mtron T Your System The new scalable measuring, control and automation system Datei: JUMO_PI_1753_quer.jpg Datei: JUMO_PI_1753_hoch.jpg PI 1753 (4/4) Editorial information: Susanne Sippel, Press Office Phone: , fax: , susanne.sippel@jumo.net Technical information: Thomas Diel, Product Manager Phone: , fax: , thomas.diel@jumo.net

7 JUMO dtrans p20 Process Pressure Transmitters The JUMO dtrans p20 pressure transmitter combines maximum precision with simple operation. Operation with the new rotary knob is even more convenient and faster. This means you can also operate the instrument in the Ex area at any time, without opening the housing. The housing and sensors are made from high-quality stainless steel. So the pressure transducer is also ideally suited for use in hygienically sensitive areas. The compact housing with half the overall depth can also be used when conditions for mounting are restricted. General Data Pressure types Measuring range Scaling Linearity error Differential pressure, relative, absolute 5mbar to 600bar 1:40 (turn down) < 0,07% of full scale Output 4 to 20mA with HART Medium temperature 40to +120 C / optionally up to 200 C Enclosure protection IP67 PR EN Features n stainless steel housing, short design option n simple operation n stainless steel sensors n EHEDG certified (with JUMO PEKA process connection system) n Explosion protection EEx ia and EEx d n HART interface n Setup program n 1:40 turn down n medium temperature up to 200 C Electrical connection Pressure connection screw-type cable gland or M12 connector welded stainless steel; all usual threads and flanges available, as well as hygienic connections Possible areas of application: Food, breweries, dairies, pharmaceuticals, plant engineering, offshore, shipbuilding, chemicals, water supply, wastewater engineering, power stations, oil and gas

8 High-profile products and services Phone: Analytical Measurement ph/redox: sensors and transmitters/controllers Conductivity instrumentation: conductive and inductive Dissolved oxygen measurement Chlorine, chlorine dioxide, ozone, hydrogen peroxide and peracetic acid instrumentation Fittings and accessories Controllers, Power units, System/ Recording technology Process controls and programmers Automation software Electronic thermostats/microstats Safety temperature monitor/limiter Digital indicators Process controller Recording instruments Temperature transmitters Thyristor power switches /power units Software and accessories Thermostats and Dial Thermometers Panel and surface mounting thermostats in TR, TW, TB, STW and STB versions Room thermostats Warm-air thermostats Ex thermostats (ATEX) Electronic thermostats Dial thermometers as indicating and control instruments Bimetallic temperature switches Electronic temperature indicators with transmitter Pressure measurement technology Pressure transmitters Pressure switch Level probes Pressure gauge Pressure cells Chemical seals and accessories Electronic modules CAD layouting Component procurement THT and SMD placing AOI-testing In-circuit testing Functional testing Run-In Final assembly Final instrument test Transducers for Temperature and Humidity Thermocouples Resistance thermometers Ex temperature probes (ATEX) Wireless temperature probe Humidity measuring instruments DKD (German Calibration Service) laboratory Nationally accredited testing station for heat Metalworking Stamping and forming systems Tool manufacture Flexible sheet metal working Welding, jointing and assembly systems Surface engineering Machining Float Materials laboratory Platinum temperature sensors in wirewound technology: Glass Glass with glass extension Ceramic Foil in thin-film technology: Chip with connecting wires Chip in SMD style on epoxy board Chip with terminal clamps Chip in cylindrical style Chip in SMD style Service Planning and project design for automation solutions German Calibration Service (DKD) for temperature Support during commissioning and optimization Worldwide service network Technical support line Seminars and workshops Fieldbus center Technical literature JUMO home page: / Head office Fulda JUMO GmbH & Co. KG mail@jumo.net Darmstadt Essen Hannover Ingolstadt Stuttgart Austria JUMO Mess- und Regelgeräte Ges.m.b.H info@jumo.at Belgium JUMO Automation S.P.R.L./P.G.M.B.H./B.V.B.A info@jumo.be Bulgaria JUMO Izmervatelni uredi i Regulatori jumobg@centrum-group.com Czech Republic JUMO Mereni a regulace s.r.o info@jumo.cz China Hungary JUMO Automation Dalian Co. Ltd. JUMO HUNGARIA Kft info@jumo-china.com jumobudapest@jumo.hu Croatia JUMO India Mess- u. Regelgeräte Ges.m.b.H JUMO India Pvt. Ltd info@jumo.hr info.in@jumo.net Italy JUMO Italia SRL info.it@jumo.net Poland JUMO Sp.z.o.o biuro@jumo.com.pl Romania S.C. JUMO Romania S.R.L info@jumo.ro Russia JUMO GmbH jumo@jumo.ru Serbia/Montenegro JUMO Mereni i regulacioni uredajaj sipljan@eunet.yu Denmark Netherlands JUMO Måle- og Reguleringsteknik A/S JUMO Meet- en Regeltechniek B.V info.dk@jumo.net info@jumo.nl Slovakia JUMO Slovensko s.r.o France Norway jumo@stonline.sk JUMO Régulation SAS JUMO AS Slovenia info.fr@jumo.net info.no@jumo.net JUMO merilni in regulacijski aparati info@jumo.si Spain JUMO Control S.A g.jentsch@jumo.es Sweden JUMO Mät- och Reglerteknik AB info@jumo.se Switzerland JUMO Mess- und Regeltechnik AG info@jumo.ch Turkey JUMO Ölçü Sistemleri ve info.tr@jumo.net USA JUMO Process Control, Inc info@jumo.us United Arab Emirates JUMO GmbH & Co. KG info.ae@jumo.net United Kingdom JUMO Instrument Co. Ltd sales@jumo.co.uk For further international locations please visit