Recommended spare parts and often used accessories
|
|
- Andrew Conrad Gilmore
- 5 years ago
- Views:
Transcription
1 Recommended spare parts and often used accessories Electric Actuators Rotary Actuators 2SA5 Linear Actuators 2SB5 Part-turn Actuators 2SC5 and 2SG5 for types 2 S Issue Subject to changes without notice! Y /GB
2 Recommended spare parts Suggested minimum quantity for spare parts for operating time [%] Base order No. 1) (2SY5 + part No.) part No. Short description Explosion views see attachment... 2 years / commissioning 8 years Delivery period [weeks] Spare part definition + detailed description Page Electronics Electronics unit f, g, i, k Electronics housing cover f, g, i, k PC board plugs f, g, i, k Mechanical Output shaft insert A a, b Gasket set for commissioning 10 - all depictions Gasket set, complete Signaling gear, complete a, b, c, d, e Cover for position recording a, b, c, d, e, p Hand manual a, b, c, d, e, p Handle / hand crank / hand wheel a, b, c, d, e, p Often used accessories Short description Order No. Delivery period [week] Detailed description Page COM-SIPOS PC parameterization program 2SX5100-3PC Parking socket 2SX5303-0PS Separate mounting 2SX GA Attachments f,g Electronics ECOTRON - Connections, housings, control electronics 16 (explosion views) i,k PROFITRON/HiMod - Connections, housings, control electronics 17 a Mechanical Rotary actuator - 2SA5. 1/2/3/ b - 2SA5. 5/6/7/ c Linear actuator - 2SB5. 1/2/3/ d - 2SB5. 5/ p small Part-turn actuator - 2SG e Part-turn actuator - 2SC ) Numbers printed in bold are part Nos. of the explosion views! Page 2 Y /GB
3 Electronics 2SY5001- Electronics unit Version: Notes: Definition: painted RAL7030, completely assembled, including mounting parts for mounting to the actuator's gear unit and mounting instruction. Connection openings are covered for transport/stocks. (including the parts , 034, 035, 041 and 042 that are used depending on the version). - Electronics units are function-tested and are documented with a separate serial number and order number (2SY5...-) and are specified on a neutral rating plate. A wiring diagram is included. - Current data such as the number of elapsed hours of the motor cannot be imported from the original electronics unit. Wherever applicable, maintenance intervals must be reparameterized. see below! Identical electronics unit: Determining spare parts with importing of all actuator-specific data in the EEPROM by the supplier. (Electronics unit can only be used for absolutely identical actuator versions, e.g. rotary actuators with Nm and 5-40 rpm.) Example: supplied type 2 S A CD0 0-3AB3 bold = relevant data positions A 0 B 1 C 2 G 3 B B D D E S 1) E T 1) J J B D S (small electronics unit resp. motor up to1.5 kw) T (big electronics unit resp. motor 3 or 5.5 kw) J Identical electronics unit 2 S Y CD30-3AB3 bold = shifted data positions Actuator-neutral electronics unit: Determining spare parts exclusively taking into account the data relevant to the version (Electronics unit largely actuator-neutral. Actuator type, torques or cut-off forces and speed, output speed or positioning time are reimported from the old unit via the serial interface using the PC parameterization program COM-SIPOS, Order No. 2SX5100-3PC02 and are placed in the replacement unit's EEPROM.) Example: supplied type 2 S C C E 1 7-4DG4 bold = relevant data positions B B D D E S 1) E T 1) J J B D S (small electronics unit resp. motor up to 1.5 kw) T (big electronics unit resp. motor 3 or 5.5 kw) J Actuator-neutral electronics unit 2 S Y P S 0 0-4DG4 bold = shifted data positions Note: The actuator-neutral electronics unit for modulating actuators 2S can also be used for standard actuators 2S.50! The actuator-neutral electronics unit for continuous modulating actuators 2S can also be used for modulating actuators 2S.55 and for standard actuators 2S.50! 1) electronics unit for 3 phase power supply Version small electronics unit S big electronics unit T Actuator types 2SA501., 2SA502., 2SA503., 2SA504.-.C, 2SA551., 2SA552., 2SA553., 2SA554.-.C, 2SB551., 2SB552., 2SB553., 2SB554., 2SC5... and 2SG5...; HiMod: 2SA581., 2SA582., 2SA583., 2SA584.-.C, 2SB581., 2SB582., 2SB583. and 2SB584. 2SA504.-.D, 2SA504.-.E, 2SA505., 2SA506., 2SA507., 2SA508., 2SA554.-.D, 2SA555., 2SA556., 2SA557., 2SA558., 2SB555. and 2SB556.; HiMod: 2SA584.-.D, 2SA585., 2SA586., 2SA587., 2SA588., 2SB585. and 2SB586. Y /GB Page 3
4 Order No. 2SY Electronics unit Description List price 0 for standard 2S.50 5 for modulating duty 2S.55 (actuator-neutral version can also be used for 2S.50) 8 for HiMod 2S.58 (actuator-neutral version can also be used for 2S.55 and 2S.50) *) add. cost Rotary actuators 2SA5 Linear actuators 2SB5 Part-turn actuators 2SC5 resp. 2SG5 A 1,25 10 rpm without B 2,5 20 rpm C 5 40 rpm mm/min resp sec/90 D rpm E rpm P actuator-neutral requires 0 in 11 th and 12 th place of order No. B 1x AC V without D 1x AC V J 3x AC V S 3x AC V small electronics unit (motor up to 1.5 kw) T big electronics unit (motor 3 or 5.5 kw) *) *) Rotary actuators 2SA5 Linear actuators 2SB5 Part-turn actuators 2SC5 resp. 2SG5 0 actuator-neutral resp. 2SC5.0. 2SG5.0. without 1 2SA5.1. 2SB5.1. 2SC5.1. 2SG SA5.2. 2SB5.2. 2SC5.2. 2SG SA5.3. 2SB5.3. 2SC SA5.4. 2SB5.4. 2SC SA5.5. 2SB5.5. 2SC SA5.6. 2SB5.6. 2SC SA SA actuator-neutral resp. for rotary actuator 2SA5 without 1 for linear actuator 2SB5 2 for part-turn actuator 2SC5 3 for small part-turn actuator 2SG5 3 Control electronics ECOTRON without 4 Control electronics PROFITRON/HiMod A without add-ons for electronics unit without B Relay board C PROFIBUS DP with V1 and V2 services (V2 services only with PROFITRON/HiMod) - 1-channel D PROFIBUS DP with V1 and V2 services (only with PROFITRON/HiMod) - 2-channel E MODBUS RTU - 1-channel F MODBUS RTU - 2-channel (only with PROFITRON/HiMod) G PROFIBUS DP - 1-channel, Micromaster compatible (incl. part 033) H PROFIBUS DP - 2-channel, Micromaster compatible (incl. part 033) J for HART without K for HART + relay board A standard software-function without B Positioner for standard (only PROFITRON) for modul. duty (only PROFITRON) for HiMod without C Process controller for modul. duty (only PROFITRON) for HiMod D travel dependent output speed adjustment (only PROFITRON) E Positioner + travel dependent output speed adjustment for modul. duty (only PROFITRON) for HiMod F external analog output speed setpoint (only PROFITRON) G Positioner + external analog output speed setpoint for modul. duty (only PROFITRON) for HiMod H Positioner with proportional control / split-range functionality for modul. duty (only PROFITRON) for HiMod J travel dependent freely adjustable positioning times (only PROFITRON) K Positioner + travel dependent freely adjustable for modul. duty (only PROFITRON) positioning times for HiMod L Process controller + travel dependent freely adjustable for modul. duty (only PROFITRON) positioning times for HiMod 3 for direct connection without 4 for round plug / field bus interface resp. for electrical isolation of analog signals without Additional features see following page *) Differentiation only necessary if the data is not read out of the EEPROM of the old unit with the PC parameterization program COM-SIPOS (Order No. 2SX5100-3PC02) via the serial interface RS 232 or Bluetooth resp. the fieldbus interface RS 485 (a change of the actuator type as also of the factory parameters is not possible via fieldbus) and is read into the replacement electronics. Actuator-neutral electronics unit: 2SY5001-.P Page 4 Y /GB
5 Additional features for electronics unit 2SY5001- (add. "-Z" to order No.) add. cost ECOTRON M 1 8 Automatic motor stop period heater S 2 1 Analog actual position value 4-20mA (only standard version) PROFITRON M 1 8 Automatic motor stop period heater without P 4 1 prepared for non-intrusive P 4 2 Control PC board prepared for non-intrusive (only in combination with S31 ) S 3 8 prepared for external COM-SIPOS interface Setting/programming K 7 0 for modulating duty with reduced cycles S4/S5 (only standard version) V 5 0 Test to IEC without Y 0 5 Torque dependent cut-off in end position: Y 1 1 Parameterization to customer requirement specify serial number! Y 3 3 Binary and analog inputs freely usable via fieldbus without Y.. project dependent parameterization: Y12, Y14, Y15, Y17, Y19, Y50, Y90 Y 9 9 Customer specific software-programming on request Customer plate B 0 0 with freely definable text Language for rating plate B.. Rating-plate foreign-language/english: without CN (B58), CZ (B55), DK (B62), ES (B51), FI (B54), FR (B50), GB (B49), GR (B60), IT (B52), PL (B57), PT (B64), RO (B59), RU (B53), SA (B65), SE (B56), SK (B61), TR (B63) SIPOS 5 Micromaster S 3 1 Connection electronics unit to gear unit acc. to SIPOS 5 Micromaster (delivered until 2001) P 1 5 Connection with PG-threads (only applicable for PROFIBUS connection) without Other C 2 1 special plug connection with view glass, with C10 with C11 C 5 0 Bluetooth interface PROFITRON (Cover made of Macrolon) HiMod (instead of external COM-SIPOS interface!) without C 5 1 Bluetooth interface PROFITRON (Cover made of metal) HiMod (instead of external COM-SIPOS interface!) without C 6 0 Binary inputs OPEN/CLOSE for 120V AC C 6 1 Parameterization for project Lünen with signaling output 1 via relay C 6 2 Binary inputs OPEN/CLOSE/STOP/EMERGENCY for 230 V AC (external power supply) C 6 3 Binary inputs OPEN/CLOSE for 115 V AC (internal power supply) C 6 9 Protective circuit for position feedback (V58) removed from the control board without E 2 1 Version with safety relay K 5 1 Protection class IP 68 for ECOTRON and PROFITRON with L38 for HiMod P 4 0 prepared for magnetic position sensor without S 6 0 Local controls without bush buttons S 6 1 Electronics housing cover small electronics unit (motor up to 1.5 kw) made of metal big electronics unit (Motor 3 or 5.5 kw) T 0 6 Temperature range -30 C to +60 C without special wiring diagram project dependent wiring diagram: without (only applicable for the electrical connection) C.. D.. C10, C11, C15, C16, C23, C25, D00, D01, D02, D03, D04, D05 Finish paint L 3 0 unpainted L 3 2 Double thick-film paint 150 µm (instead of 80 µm) L 3 8 Very high corrosion protection, corrosivity category C5 with long protection time Y 3 5 Top coat of paint for colors other than RAL7030: specify required color! Σ List price = List price + Σ add. cost... [...] Electronics unit (Stell-E001) Y /GB Page 5
6 Order No. 2SY Description List price Electronics housing cover (painted RAL7030, complete with push buttons, operating foil, O-ring and mounting parts) 3 E D 0 1 ECOTRON small electronics unit (motor up to 1.5 kw) standard 3 M C 0 1 made of metal (S61) 3 E D 3 4 big electronics unit (motor from 3 kw) 1) standard 3 M C 3 4 made of metal (S61) 4 E D 0 1 PROFITRON small electronics unit (motor up to 1.5 kw) standard 4 M C 0 1 made of metal (S61) 4 E D 3 4 big electronics unit (motor from 3 kw) 1) standard 4 M C 3 4 made of metal (S61) 8 M C 0 1 HiMod small electronics unit (motor up to 1.5 kw) made of metal 8 M C 3 4 big electronics unit (motor from 3 kw) 1) Additional features (add. "-Z" to order No.) Push buttons S 6 0 without push buttons HiMod C 5 0 prepared for Bluetooth small electronics unit made of Macrolon big electronics unit 1) Finish paint L 3 2 Double thick-film paint 150 µm (instead of 80 µm) (only metal version) L 3 8 Very high corrosion protection, (only metal version) corrosivity category C5 with long protection time Y 3 5 Top coat of paint for colors other than RAL7030: specify required color! add. cost Σ List price = List price + Σ add. cost... [...] Padlock Protection cover for the local control station Order No.: 2SX5302-0VS00 Order No.: 2SX5302-0SD00 Electronics housing cover (Stell-E041) 1) big electronics unit Version big electronics unit (from 3 kw) Actuator type 2SA504.-.D, 2SA504.-.E, 2SA505., 2SA506., 2SA507., 2SA508., 2SA554.-.D, 2SA555., 2SA556., 2SA557., 2SA558., 2SB555. and 2SB556.; HiMod: 2SA584.-.D, 2SA585., 2SA586., 2SA587., 2SA588., 2SB585. and 2SB586. Page 6 Y /GB
7 Order No. Description List price 2SY S T 1 0 PC board plugs [...] complete set for power and control wire connections incl. markers (including the plug versions X1, X2.1, X2.2,.X3.1 and X3.2) Y /GB Page 7
8 Mechanical 2SY5216- Output shaft insert A Version: depending on the version with thrust washers, thrust needle rims, spigot ring, shaft sealing ring (includes part 217) Definition: To uniquely define the spare part, include the data positions of the actuators for which use is intended in the order number of the spare part. Example: supplied type 2 S A CE1 0-3BA3 bold = relevant data positions Output shaft insert A for F14 flange 2 S Y EA3 0 bold = shifted data positions Order No. Description 2SY E A Output shaft insert A 1) << Enquire with stating the serial number if necessary! >> Rotary actuator standard Rotary actuator modulating duty Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm 7 2) 3) Nm Nm 8 2) Nm Nm Flange DIN ISO 5210 DIN F F10 G0 2 F F14 G1/2 4 F16 G3 5 F25 G4 6 F30 G5 0 A ISO H0A A 3210 Shaft standard List price Type DIN modul. duty on request adjacent Additional features see following page Output shaft insert A (Stell-E216) 1) Since mid 2002 modified parts are used. Enquire with stating the serial number (see name plate) if necessary! For replacements before mid 2002: 2 nd block EE instead of EA! 2) Since end 2007 modified parts are used. Enquire with stating the serial number (see name plate) if necessary! For replacements before end 2007: 2 nd block EE instead of EA! 3) Beginning 2009 modified parts will be used. Inquire with stating the serial number (see name plate) if necessary! Page 8 Y /GB
9 Additional features for Output shaft insert A 2SY5216-.E... (add. "-Z" to order No.) Acme screw thread 1) Y 1 8 for gear size 1 2) gear size 3 2) gear size 4 2) Flange F14 / G1/2 and F16 / G3 Flange F25 / G4 Flange F30 / G5 add. cost Special thread / design Y 2 1 Output shaft type A with special thread / design on request non-corroding Y 7 0 A-insert (stem nut) made of stainless steel on request Σ List price = List price + Σ add. cost... [...] Order No. Description List price 2SY D S 1 0 Gasket set (O-rings, square seals and shaft sealing rings, complete) 0 Recommended gasket set for commissioning for 2S.5-actuators (O-rings for electronics housing cover, signaling gear hood and connection cover/hood) 1 Gear size 1 2) 3 Gear size 3 2) 4 Gear size 4 2) 6 2SG5 Additional features (add. "-Z" to order No.) Kurzangabe Ambient condition T 0 9 Temperature range -20 C to +90 C for gear unit add. cost for recommended gasket set on request Gear size 1 1) Gear size 3 and 4 1) Σ List price = List price + Σ add. cost... [...] Gasket set (Stell-E218) 1) Add. cost for bushings with acme screw thread LH according to DIN 103, Part 2. The acme screw thread must be expressly stated, e.g. Tr 16 x 4 LH DIN ) Rotary actuators Linear actuators Part-turn actuators standard modul. duty modul. duty standard modul. duty Gear size 1 2SA SA SB SC SC SA SA SB SC SC SC SC SC SC504.- Gear size 3 2SA SA SB SC SC SA SA SB SC SC554.- Gear size 4 2SA SA SB SA SA SB SA SA SA SA5.8.- Y /GB Page 9
10 Order No. Description List price 2SY MG Signaling gear, complete 1) 2) (complete with potentiometer mounted and adjusted) contains the parts 221 and 222 used depending on the version for standard without mechanical position indicator SIPOS 5 Flash with mechanical position indicator for modul. duty without mechanical position indicator SIPOS 5 Flash with mechanical position indicator Additional features (add. "-Z" to order No.) add. cost Standard actuator in S4/S5 duty K 7 0 for modulating duty with reduced cycles S4/S5 on request > 4020 revs/stroke P 3 4 signaling gear for > 4020 revs/stroke (only 2SA5) non-contact type position transmitter P 4 0 magnetic position sensor (instead potentiometer) shorter mechanical K 5 1 for protection class IP 68 without position indicator L 3 8 for very high corrosion protection, corrosivity category C5 with long protection time S 7 1 for signaling gear hood made of metal Σ List price = List price + Σ add. cost... [...] Signaling gear (Stell-E220) 1) The pressing-out tool 2SX5501-0CD02 is needed to release the contacts pins in part ) Secure screws with Loctite 222! Page 10 Y /GB
11 Order No. Description List price 2SY Cover for position recording (complete with O-ring and mounting parts) 0 M D for Flash 2SA5, 2SB5 and 2SC5 standard 0 M N for non-intrusive position encoder P41 6 M H for 2SG5 made of metal, painted RAL M N for HiMod 2S.58 Additional features (add. "-Z" to order No.) add. cost Cover made of metal K 5 1 Protection class IP 68 for Flash standard with L38 for P41 with L38 S 7 1 Signaling gear hood made of metal for Flash standard for P41 S 7 2 Flat metal cover for P41 Ambient condition T 0 9 Temperature range -20 C to +90 C for gear unit on request Finish paint L 3 2 Double thick-film paint 150 µm for Flash standard (instead of 80 µm) (only metal version) for P41 L 3 4 Painting signaling gear hood for Flash standard L 3 8 Very high corrosion protection, for Flash standard corrosivity category C5 for P41 with long protection time for 2SG5 (only metal version) for HiMod 2S.58 Y 3 5 Top coat of paint for colors other than RAL7030: specify required color! Σ List price = List price + Σ add. cost... [...] Cover for position recording (Stell-E225) Y /GB Page 11
12 Order No. Description List price 2SY Hand manual 1) (depending on the version, painted RAL7030, complete with support plate, compression spring, connecting cable, O-ring, centrifugal lock for gear size 4, handle and mounting parts) 1 H U 1 0 for Flash Hand manual gear size 1 2) with crank 60mm 3 H U 1 0 Hand manual gear size 3 2) with crank 90mm 1 H M 1 0 for HiMod Hand manual gear size 1 2) with hand wheel 3 H M 1 0 Hand manual gear size 3 2) 4 H U 1 0 for Flash and HiMod Hand manual gear size 4 2) 6 H U 0 0 2SG5 Hand wheel, complete Additional features (add. "-Z" to order No.) add. cost Hand wheel V 2 5 Hand wheel instead of hand crank Direction of rotation V 2 8 Direction of rotation reference at the hand wheel/crank in counter-clockwise direction Ambient condition T 0 9 Temperature range -20 C to +90 C for gear unit on request Finish paint L 3 2 Double thick-film paint 150 µm (instead of 80 µm) L 3 8 Very high corrosion protection, corrosivity category C5 with long protection time Y 3 5 Top coat of paint for colors other than RAL7030: specify required color! Σ List price = List price + Σ add. cost... [...] Hand manual (Stell-E250) 1) The pressing-out tool 2SX5501-0CD02 is needed to release the contacts pins in part ) Rotary actuators Linear actuators Part-turn actuators standard modul. duty modul. duty standard modul. duty Gear size 1 2SA SA SB SC SC SA SA SB SC SC SC SC SC SC504.- Gear size 3 2SA SA SB SC SC SA SA SB SC SC554.- Gear size 4 2SA SA SB SA SA SB SA SA SA SA5.8.- Page 12 Y /GB
13 Order No. 2SY Description List price Handle 1) / hand crank / hand wheel (hand crank / wheel painted RAL7030) 1 G M 0 6 for Flash Handle gear size 1 2) and 3 2) for hand crank 1 G M 1 1 for Flash and HiMod Handle gear size 4 2) for hand wheel 6 G M 0 0 2SG5 Handle for hand wheel 1 H H 0 0 for Flash Hand crank 60 mm with handle gear size 1 2) 3 H H 0 0 Hand crank 90 mm with handle gear size 3 2) 1 H M 0 0 for HiMod Hand wheel with handle gear size 1 2) 3 H M 0 0 Hand wheel with handle gear size 3 2) 4 H H 0 0 for Flash and HiMod Hand wheel with handle gear size 4 2) Additional features (add. "-Z" to order No.) add. cost Hand wheel V 2 5 Hand wheel instead of hand crank on request Direction of rotation V 2 8 Direction of rotation reference at the hand wheel/crank in counter-clockwise direction Finish paint L 3 2 L 3 8 Double thick-film paint 150 µm (instead of 80 µm) Very high corrosion protection, corrosivity category C5 with long protection time Y 3 5 Top coat of paint for colors other than RAL7030: specify required color! Σ List price = List price + Σ add. cost... [...] Handle / hand crank / hand wheel (Stell-E252) 1) Secure screw with Loctite 243! 2) Rotary actuators Linear actuators Part-turn actuators standard modul. duty modul. duty standard modul. duty Gear size 1 2SA SA SB SC SC SA SA SB SC SC SC SC SC SC504.- Gear size 3 2SA SA SB SC SC SA SA SB SC SC554.- Gear size 4 2SA SA SB SA SA SB SA SA SA SA5.8.- Y /GB Page 13
14 Accessories Order No. Description List price 2SX P C 0 2 COM-SIPOS PC parameterization program (for commissioning, programming, diagnosis, maintenance and visualization) [...] Scope of supply PC parameterization program User manual DE and GB/US (on CD) Zero-modem cable + USB adapter CD COM-SIPOS Order No. Description List price 2SX P S 0 1 Parking socket [...] (for direct and plug connection, grey surface coating) Scope of supply Parking socket Cover with screws Parking socket (Stell-PSD) Page 14 Y /GB
15 Accessories Order No. Description List price 2SX G A Installation kit for separate mounting (anthracite anodized, complete with mounting bracket, tubular steel stirrup and, depending on version, with O-rings, mounting parts, caps or heavy-gauge threaded joint and all parts needed for electrical connection such as covers and plugs etc.) Add. version of the original delivery Length of connecting cable S41 + R70 3 m R71 5 m R72 10 m S47 + R70 3 m R71 5 m R72 10 m Version of connection (a) (b) (a) (b) Fixed cable connection Connecting cable with connection plug hoods (electronics unit and gear unit) completely assembled. Cable ends ready for plugging in. Fixed cable connection for variable lengths Connecting cable with connection plug hood (electronics unit) and with free ends towards the gear unit, completely assembled. The cable ends to the connection plug hood on the gear unit side must be connected locally after individual cutting to length and in accordance with the included connection diagram. Cable ends ready for plugging in. Additional features (add. "-Z" to order No.) add. cost Ambient condition T 0 9 Temperature range -20 C to +90 C for gear unit on request Finish paint L 3 2 Painted RAL 7030 L 3 8 Very high corrosion protection, corrosivity category C5 with long protection time Σ List price = List price + Σ add. cost... [...] Separate mounting, version shown 2SX5300-4GA.. Y /GB Page 15
16 Electronics unit ECOTRON (motor up to 1.5 kw) (Stell55) Electronics unit ECOTRON (motor from 3 kw) (Stell57) Page 16 Attachment f, g Y /GB
17 Electronics unit PROFITRON/HiMod (motor up to 1.5 kw) (Stell54) Electronics unit PROFITRON/HiMod (motor from 3 kw) (Stell56) Y /GB Attachment i, k Page 17
18 Gear unit 2SA5. 1/2/3/4.- (Stell93) Output shaft B1 Output shaft insert Reducing flange Output shaft A Page 18 Attachment a Y /GB
19 Gear unit 2SA5. 5/6/7/8.- (Stell94) Output shaft B1 Output shaft insert Reducing flange Output shaft A Y /GB Attachment b Page 19
20 Gear with stroke unit 2SB5. 1/2/3/4.- (Stell98) Page 20 Attachment c Y /GB
21 Gear with stroke unit 2SB5. 5/6.- (Stell89) Y /GB Attachment d Page 21
22 small part-turn gear 2SG5...- (Stell71) Page 22 Attachment p Y /GB
23 Gear with part-turn unit 2SC5...- (Stell90) Y /GB Attachment e Page 23
24 Issue SIPOS Aktorik GmbH Y /GB Subject to changes without notice! Im Erlet 2 D Altdorf
Recommended spare parts and often used accessories
Recommended spare parts and often used accessories Electric Actuators Rotary Actuators 2SA5 Linear Actuators 2SB5 Part-turn Actuators 2SC5 and 2SG5 for types 2 S 5 - - 3 4 Issue 07.18 Subject to changes
More informationTechnical Data Part-turn gearbox 2SP78
Part-turn gearbox 2SP78 Contents Page General data Mounting position, duty classifications, noise level, paint finish and corrosion protection, lubrication, degree of protection, ambient temperature 2
More informationTechnical Data Electric double-motor-actuators
M768 Electric double-motor-actuators Contents Page General data Overview, application, design and mode of operation, mounting position Technical details General Motors Switching and signaling unit Electrical
More informationField IT Actuators & Positioners Rotary Actuators - Rated Torque 100 Nm (80 ft-lbs) PME 120-AI/AN. Rotary Actuators Rated Torque 100 NM (80 ft-lbs)
Data Sheet Field IT Actuators & Positioners Rotary Actuators - Rated Torque 100 Nm (80 ft-lbs) PME 120-AI/AN Electric actuator for continuous duty modulating or pulse input control. Stall proof without
More informationMME/MOE Intelligent Electric Actuators About Ontrac
About Ontrac 01 Specifications Voltage supply Duty mode Motor control 3-phase AC, 380/460±10%, 50/60Hz±5%; 1-phase AC, 220±10%, 50/60Hz±5%; On-off (MOE series,) a complete stroke, S2-15 min; Modulating
More informationmass flowmeter for compressed air
mass flowmeter for compressed air VARIOMASS ECO pressure and temperature compensated easy and cost effective installation of the sensor no pressure loss caused by the sensor no moving parts, i.e. maintenance
More informationIntelligent Positioner
Intelligent Positioner Construction The digital electro-pneumatic positioner detects the valve position with an external long life travel sensor. It possesses a solid housing with protected operating keys.
More informationARCAPRO positioner. Positioner customized for specific tasks
ARCAPRO ARCAPRO Positioner customized for specific tasks 2 3 1 A linear function between the input signal and stroke is the best way to ensure maximum control precision. Control valves with pneumatic actuators,
More information1 potential-free change-over contact (max. 24 V DC/1 A) for SIL collective failure signal SIL functions - safety functions Standard: Safe ESD
General information AC 01.2 Actuator controls in SIL version for controlling multi-turn actuators of the SA/SAR.2 type range and part-turn actuators of the SQ/SQR.2 type range. Information on SIL features
More informationCK Range. Keeping the World Flowing. Spare Parts Manual. Modular Design Electric Valve Actuators
CK Range Spare Parts Manual Modular Design Electric Valve Actuators Note: Full details from the actuator nameplate must be given when enquiring about or ordering spare parts Spare Parts Manual for CK Range
More informationTopControl Continuous
860 Electropneumatic positioner for pneumatically actuated control valves Type 860 can be combined with... Type 7 Type 70 Types 70/7/7K Type 800 Piston-controlled globe valve Piston-controlled angle seat
More informationWe reserve the right to alter data according to improvements made. Previous documents become invalid with the issue of this document.
General information Actuator controls AC 01.2 for controlling multi-turn actuators of the SA/SAR type range and part-turn actuators of the SQ/SQR.2 type range. Features and functions Power supply Standard
More informationField IT Actuators & Positioners. Intelligent Electric Modulating Actuator. Contrac RHD Intelligent Electric Modulating Actuator
Data Sheet Field IT Actuators & Positioners Intelligent Electric Modulating Actuator Contrac RHD 16000 Electric actuator for continuous duty modulating or pulse input control. Stall proof without the need
More informationSpecial voltages: Voltage >500 V AC are only permissible with external control box. 3-phase AC Voltages/frequencies. 1-phase AC Voltages/frequencies
General information Actuator controls AC 01.2 for controlling multi-turn actuators of the SA/SAR type range and part-turn actuators of the SQ/SQR.2 type range. Power supply Standard voltages AC: 3-phase
More informationVALVE CONTROLLERS Controllers for Dust Extr 2010 / 2011 action Technology
VALVE CONTROLLERS Controllers for Dust Extraction 2010 Technology / 2011 Valve controllers for all cases HESCH has the skills and technology to tackle any control task for dedusting of filter and dust
More informationTrue Fail-Safe Technology and Precision Control for Reliable Shutdown
True Fail-Safe Technology and Precision Control for Reliable Shutdown RTS Series Compact Fail-Safe Electric Actuators Reliable, Accurate, Compact Electric Actuation Technology for Critical Fail-Safe and
More informationMME/MOE Intelligent Electric Actuators About Ontrac
About Ontrac 01 Specifications Voltage supply 3-phase AC, 380/460±10%, 50/60Hz±5%; 1-phase AC, 220±10%, 50/60Hz±5%; On-of V Voltage input 24V Voltage output 24V resistance; rising characteristic (2) r
More informationLINEAR ELECTRIC ACTUATORS
LINEAR ELECTRIC ACTUATORS Type EL EL12, EL20, EL45, EL80, EL120, EL250 DESCRIPTION Electric linear actuators EL series for modulating and openclose duty of control and process technology to operate control
More informationTQ Series represents our devoted technology over 30 years of experience in the valve actuation, offering customer the reliable, quality assured, and
02 TQ Series represents our devoted technology over 30 years of experience in the valve actuation, offering customer the reliable, quality assured, and cost-effective product. Features Light, compact and
More informationHigh performance Vector Control. Ratings. System configuration
System configuration High performance Vector Control Low harmonic or regenerative drive IP54 full range Compact design and robustness Built-in filter (according to C3 class) Built-in fuses (from 200 kw)
More informationSystem Electropneumatic Converters (Proportional Valves) Electronic Process Controllers Signal Converters
System 6000 Electropneumatic Converters (Proportional Valves) Electronic Process Controllers Signal Converters Edition April 2018 Information Sheet T 6000 EN Electropneumatic Converters i/p converters
More informationElectric linear actuators
Electric linear actuators 06, 12/20/45, 80, 200 Electric linear actuators for modulating and openclose duty of control and process technology to operate control valves. The self-locking stem/stem nut is
More informationLINEAR ELECTRIC ACTUATORS
LINEAR ELECTRIC ACTUATORS Type EL EL12, EL20, EL45, EL80, EL120, EL250 DESCRIPTION Electric linear actuators EL series for modulating and openclose duty of control and process technology to operate control
More informationFlowPak TM General Application Valve DN , PN 10 / 40
FlowPak TM General Application Valve DN 15 -, PN / SCHERR Application Control of gases, vapours and liquids. The modular concept of valve, multi spring actuator and our standard Positioner facililates
More informationMICRO MASTER MICRO MASTER Vector MIDI MASTER Vector
Standard Drives 1 W to kw VECTOR CONTROL SENSORLESS , and : The facts about the favourites Worldwide voltage ranges for a global product 1/3 phase 8-2 V AC % 3 phase 0-0 V AC % 3 phase 0-5 V AC % Greater
More informationEAS822 (Contrac) Power Electronic Unit
Contents Data Sheet Rev. A EAS822 (Contrac) Power Electronic Unit For continuous control of Contrac actuators PME120 AN and LME620 AN Microprocessor-controlled power electronic unit with integrated frequency
More information2/2-way Globe Control Valve, threaded port connection, DN 10-65
2/2-way Globe Control Valve, threaded port connection, DN 10-65 Type 2712 can be combined with... Classic design with interchangeable trims, 3 to 5 Kvs-value per connection port Excellent control characteristic
More informationBall Valves in cast 316 SS multi-port, bolted construction
65 Ball Valves in cast 36 SS, bolted construction Type 65 can be combined with 800 PSI WOG Thread, socket and butt weld ends Full port to Sch 40 pipe 3/4/5 ports in L, X, T or I pattern Range of seal options
More informationProduct overview linear actuators SBA
Technical data Type 06-1/-2/-3 06-4 12 20 45-2/-3 Positioning force kn 0.6 / 0.9 / 1.2 2.0 1.2 2.0 3.5 / 4.5 6.0 Positioning speed 1) mm/min 8 / 10 13.2 / 16 20 8 / 10 13.2 25 15 17 / 25 50 17 34 Power
More informationMounting and operating instructions EB 5801 EN. Electric Actuators Type 5801 (Rotary Actuator) Type 5802 (Linear Actuator)
Electric Actuators Type 5801 (Rotary Actuator) Type 5802 (Linear Actuator) Linear Actuator with Type 3260 Control Valve Rotary actuator with lever system Linear actuator with Type 3321 (V2001) Control
More information2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25
2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25 Type 2103 can be combined with Hermetical separation of fl uids from the operating mechanism by diaphragm Zero
More informationSMARTRONIC AS-i. Type Series Booklet
SMARTRONIC AS-i SMARTRONIC AS-i R1313 Type Series Booklet Legal information/copyright Type Series Booklet SMARTRONIC AS-i KSB Aktiengesellschaft All rights reserved. Contents provided herein must neither
More informationF01 Electric Actuators
Light weight, compact, intelligent electric quarter turn actuator with torques ranging from 150 to 600 Nm and speeds from 5 to 60 seconds FEATURES Constant torque controlled in both directions Cut metal
More informationSeries 7000 Torque Sensor for PTO-shafts
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Special for PTO shafts 1 ¾ und 1 3/8 Plug & Play solution, no additional
More informationType Electronic Limit Switch
Type 3738-20 Electronic Limit Switch With optional solenoid valve Application Electronic limit switch for on/off applications to indicate the end position. Optionally with integrated solenoid valve. Special
More informationSolenoid Valve Island Type 3965
Solenoid Valve Island Type 365 for the control of pneumatic actuators General The Type 365 Solenoid Valve Island is a compact solution for the centralized control of pneumatic actuators in chemical and
More informationSeries 7000 Torque Sensor for PTO-shafts
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Special for PTO shafts 1 ¾ und 1 3/8 Plug & Play solution, no additional
More informationOperating Instructions. Angle Seat Control Valve. Type 7020
Operating Instructions Angle Seat Control Valve Type 7020 With: Digital Positioner Type 8048 Electro-pneumatic Positioner Type 8047 Pneumatic Positioner Type 8047 Version: 02/2006 Manual-7020e.doc Art.-No:
More informationPositioners Converters Limit Switches Position Transmitters Solenoid Valves Accessories. Selection and Application
Positioners Converters Limit Switches Position Transmitters Solenoid Valves Accessories Selection and Application Associated s T 8355 EN ff. Edition January 2010 Information Sheet T 8350 EN Positioners,
More informationAKM 105S, 115S: Rotary actuator with SAUTER Universal Technology (SUT) for ball valve
Product data sheet 5.1 51.364 AKM 105S, 115S: Rotary actuator with SAUTER Universal Technology (SUT) for ball valve How energy efficiency is improved Automatic adaptation to ball valve, precise activation
More information2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65
2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65 Excellent combination of good control characteristic and high fl ow rates High cycle life Clean design for optimal
More informationIssue Abbreviated MSP numbering system AUMA MATIC Types AM. Uncontrolled copy! EWH-25 GB-10. Quality Management System AUMA-Group
Issue 2004-08-04 Abbreviated MSP numbering system Types AM Only for internal use EWH-25 GB-10 Distributor: Distributor to subsidiaries representatives according to separate list Uncontrolled copy! Issue
More informationTrue Fail-Safe Technology and Precision Control Meet Emergency Shutdown and Demanding Process Applications
True Fail-Safe Technology and Precision Control Meet Emergency Shutdown and Demanding Process Applications RTS Series Compact Fail-Safe Electric Actuators Reliable, Accurate, Compact Electric Actuation
More informationJUMO dtrans p20. Process pressure transmitter. Type Brief description. Key features. Block diagram
Data Sheet 403025 Page 1/10 JUMO dtrans p20 Process pressure transmitter Brief description The JUMO dtrans p20 pressure transmitter with HART interface combines maximum precision with easy operation. It
More informationADCA VALSTEAM ADCA. LINEAR ELECTRIC ACTUATORS Type EL EL12, EL20, EL45, EL80, EL120, EL250 DESCRIPTION
LINEAR ELECTRIC ACTUATORS Type EL EL12, EL20, EL45, EL80, EL120, EL250 DESCRIPTION Electric linear actuators EL series for modulating and openclose duty of control and process technology to operate control
More information2/2 way Globe Control Valve, threaded connection, 3/8" 3"
2/2 way Globe Control Valve, threaded connection, 3/8" 3" Complete Burkert system using Type 2712 with TopControl 8630 New generation with interchangeable trims, 3 to 5 Cvs value per connection port Excellent
More informationDifferential pressure transmitter PASCAL Ci4 Delta P
Differential pressure transmitter PASCAL Ci4 Delta P for general application, Type Series CI4300 Features Differential pressure transmitter with metallic diaphragm High-resolution graphic display with
More informationBall Valve C 110. PVC-U PP PVDF - wafer flange socket end DIN-flange. Ball. Advantages. Ball seat. Application. Sealings. Utilisation.
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Ball Valve C 110 PVC-U PP PVDF - wafer flange
More informationT 3965 EN Type 3965 Solenoid Valve Island To control pneumatic actuators
T 365 EN Type 365 Solenoid Valve Island To control pneumatic actuators Application The Type 365 Solenoid Valve Island is a compact solution for the central control of pneumatic actuators in chemical and
More informationPressure transmitter PASCAL CV4
Pressure transmitter PASCAL CV4 with threaded connection, Type series CV4100 Features Application area Pharmaceutical industry Food industry Biotechnology General process technology Compact case of stainless
More information2/2-way Globe Control Valve with stainless steel design for media up to +185ºC, DN
2/2-way Globe Control Valve with stainless steel design for media up to +185ºC, DN 10-100 Type 2301 flange can be combined with Excellent control characteristics High cycle life Flow optimised body in
More informationTOP-QUALITY PNEUMATIC ACTUATOR
TOP-QUALITY PNEUMATIC ACTUATOR BS EN ISO 9001:2000 INTRODUCTION PDS series Pneumatic Actuators are designed using Scotch-Yoke technology from PDS 50 to the largest of PDS 200. Scotch-Yoke technology is
More informationELECTRIC MULTI-TURN ACTUATORS for valve automation in the oil & gas industry with high torque requirements
ELECTRIC MULTI-TURN ACTUATORS for valve automation in the oil & gas industry with high torque requirements TECHNICAL DOCUMENTATION 2016 SAEx 25.1 SAEx 40.1 SAREx 25.1 SAREx 30.1 AMExC 01.1 ACExC 01.2 Manual
More informationFlow Controller, flow control system for gases
Flow Controller, flow control system for gases Highly cost effective solution, thanks to the integrated system Reliable, robust system Automatic process tune Simple to operate Type 8750 can be combined
More informationRemote Process Actuation Control System AirLINE - Siemens ET 200S
Remote Process Actuation Control System AirLINE - Siemens ET 200S Type 8644 can be combined with... Fully compatible with Siemens ET 200S Combination of Fieldbus, pilot valves and I/O modules High flexibility
More information1/4 turn ACTELEC SG05.1 to SG12.1 (AUMA)
Type series booklet 8521.14/3--10 1/4 turn ACTELEC SG05.1 to SG12.1 Direct 1/4 turn electric actuators ACTELEC AUMA SG05.1 - SG07.1 - SG10.1 - SG12.1 Output torques up to 1200 Nm Applications All sectors
More informationOperating Instructions. Pneumatic Control Valve Low Temperature. Type Series GS3
Operating Instructions Pneumatic Control Valve Low Temperature Type 8026 Series GS3 With: Digital Positioner Type 8048 Electro-pneumatic Positioner Type 8047 Pneumatic Positioner Type 8047 Version: 03/2006
More informationRSDE10 / RSDE20 (Contrac) Electrical Linear Actuator
Contents Data Sheet Rev. A RSDE10 / RSDE20 (Contrac) Electrical Linear Actuator For continuous positioning, In explosion-proof design, Rated force 10 kn / 20 kn (2200 lbf / 4400 lbf) Electrical actuator
More informationTZIM. Electropneumatic Analog Positioner 10/ EN
TZIM Electropneumatic Analog Positioner EP001XA.tif Q Convenient, simple design Q Easy to handle Q User-friendly operation, easy to understand Q Reliable concept, I/P conversion through the 500,000 times
More informationSuperstatic 440. Static Heat Meter, Static Cooling Meter. Application
Superstatic 440 Static Heat Meter, Static Cooling Meter Application Design The Superstatic 440 is a static heat or cooling meter according to standard EN1434 class 2 based on the fluid oscillation principle,
More informationDifferential Pressure and Flow meters Accessories for the Media Series
Differential Pressure and Flow meters Accessories for the Media Series 7 8 9 10 11 6 12 Media 5 Media 6 Media 05 1 5 2 4 Media 4 3 Selection and application These accessories upgrade the devices of the
More informationSRD998 Intelligent Positioner (Version HART Basic Diagnostic)
Quick Guide 07.2016 QG EVE0108 A-(en) SRD998 Intelligent Positioner (Version HART Basic Diagnostic) These instructions are to be used as a guide for quick start-up. For more detailed information please
More informationDouble acting pneumatic actuators. ACTAIR 1.5, 3, 6, 12, 25 and 50: rack and pinion kinematics. ACTAIR 100 and 200: scotch -yoke kinematics
Technical leaflet 8515.1/3--10 ACTAIR 1.5 to 800 Double acting ACTAIR 1.5, 3, 6, 12, 25 and 50: rack and pinion kinematics ACTAIR 100 and 200: scotch -yoke kinematics ACTAIR 400 and 800: yoke AMRI patented
More informationMODULATING SERVICE ELECTRIC ACTUATORS OPERATION AND MAINTENANCE MANUAL COMMERCIAL AND INDUSTRIAL VALVES AND AUTOMATION
SERIES 000/S-X MODULATING SERVICE ELECTRIC ACTUATORS OPERATION AND MAINTENANCE MANUAL COMMERCIAL AND INDUSTRIAL VALVES AND AUTOMATION Publication S000X- VER045- For information on this product and other
More informationSuperstatic 440. Static Heat- and Cooling Meter. Application
Superstatic 440 Static Heat- and Cooling Meter Application Design The Superstatic 440 is a static heat- and cooling meter according to standard EN1434 class 2 based on the fluid oscillation principle,
More informationQ Range Watertight Single-Phase Electric Quarter-turn Actuators for part-turn valves and dampers
This brochure provides a comprehensive overview of the applications and associated functions available with Rotork Q actuators - comprising Q Standard and Q Pak actuators. The watertight Q Range actuators
More informationSITRANS P measuring instruments for pressure
Overview Siemens AG 009 Supplementary electronics for 4-wire connection Design Dimensions (W x H x D) in mm (inch) Electrical connection 80 x 10 x 60 (3.15 x 4.7 x.36) Screw terminals (Pg 13.5 cable inlet)
More information4.3 MSK SWITCH BOX MSK (SIZE I) FEATURES ADVANTAGES
SWITCH BOX MSK (SIZE I) FEATURES - A compact, robust switch box to be mounted on pneumatic actuators - Position response via integrated micro limit switches - Integrated terminal Strip - The micro limit
More informationLow voltage AC drives
General machinery drives Main features and dimensions Unique features Fast and extensive I/O PID control Application macros Many installation possibilities 200 to 480 V, 1-phase or 3-phase More value for
More informationProportional directional valves type DPZO-A* two stage without position transducer, ISO 4401 sizes 10, 16 and 25
wwwatoscom Table F70-9/E Proportional directional valves type DPZO-* two stage out position transducer, ISO 0 sizes 0, 6 and 5 Communication plastic connector, see section 5 DPZO-E-5 DPZO-ES-PS-7 (dotted
More informationCompany name: GSI Created by: Xiao Ying Wong Phone: Date: 10/03/2017 Client: Client Number: Contact:
Position Qty. Description 2 NBG 125-8-16/156 A-F2-A-BAQE Product No.: On request Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 5199 with dimensions and rated performance
More informationAS-I
Digital Positioner 8049 Compact digital positioner for pneumatic control valves. Positioner can be integrated into valve actuator (no external moving parts for stroke feedback) Wide range of strokes 3-8
More informationVP23 3-way proportional pressure control valve Directly-controlled seat valve with µp-driven pressure control G 1/4... G 3/4
-way proportional pressure control valve Directly-controlled seat valve with µp-driven pressure control G /... G / All-digital control electronics Variable pressure control Optional: serial interface with
More informationVALVES WITH NA ELECTRIC ACTUATOR
505-507 VALVES WITH NA ELECTRIC ACTUATOR CHARACTERISTICS The 505+NA and 507+NA cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
More informationPneumatic Actuators. TGA Specifications
Pneumatic Actuators The TGA model is a double-action pneumatic actuator perfect for on/off control of the various types of butterfly valves. With an optional positioner, it can also be used for flow rate
More informationVP23. 3-way proportional pressure control valve Directly-controlled seat valve with μp-driven pressure control G 1/4 to G 3/4 Nominal diameter 8/16
VP ll-digital control electronics Variable pressure control, external pressure control upon request Optional: serial interfacing with VP-Tool program Optional actuation via fieldbus (separate data sheet
More information* _0916* Drive Technology \ Drive Automation \ System Integration \ Services. Revision. Synchronous Linear Motors SL2
Drive Technology \ Drive Automation \ System Integration \ Services *23059311_0916* Revision Synchronous Linear Motors SL2 Edition 09/2016 23059311/EN SEW-EURODRIVE Driving the world Table of contents
More informationDigital Positioner 8049
Compact digital positioner for pneumatic control valves. Positioner can be integrated into valve actuator (no external moving parts for stroke feedback) Wide range of strokes 0. to. inches ( 8 mm) No steadystate
More informationBGN. All Metal Variable Area Flow Meter. Technical Data Sheet
All Metal Variable Area Flow Meter BGN Technical Data Sheet Extremely robust through star guiding system instead of guiding rod Flow metering of liquids, gases and steam Available up to nominal size of
More informationProcess Analyzer. Cold Filter Plugging Point Process Analyzer CFPP-4. Credible Solutions for the Oil and Gas Industry
Process Analyzer Cold Filter Plugging Point Process Analyzer CFPP-4 Credible Solutions for the Oil and Gas Industry Cold Filter Plugging Point Process Analyzer Analyzer CFPP-4 To remain competitive, today
More informationis found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft
Certificate No: TAA000014K Revision No: 1 This is to certify: That the Peripheral Equipment with type designation(s) JUMO AQUIS touch P (202580), JUMO DICON touch (703571) Issued to JUMO GmbH & Co. KG
More informationThe F02 series are compact, intelligent quarter-turn electric actuators for the accurate control of valves with torques from 35 to 2000 Nm /
The F02 series are compact, intelligent quarter-turn electric actuators for the accurate control of valves with torques from 35 to 2000 Nm / 308 to 17,700 lb.in. Features General application The F02 is
More informationSITRANS T measuring instruments for temperature
for installation in pipelines and tanks Overview The resistance thermometer is designed for installation in tanks and pipelines as well as for the measurement of temperature with hygiene requirements.
More informationHeavy-Duty Pneumatic Actuator. IS & IC Series
Heavy-Duty Pneumatic Actuator BS EN ISO 9001:2000 INTRODUCTION Heavy-Duty Pneumatic Actuator - The IS & IC series of Heavy Duty scotch yoke actuators are designed to suit a wide range of valves and damper
More informationARI-STEVI 423 / 463 (DN ) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators ARI-STEVI 423 / 463 (DN200-300) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP
More informationRCEL005 / RCEL
Top Quality Valve Actuators Made in Sweden RCEL005 / RCEL006-250 High quality electric actuators ROTORK SWEDEN has been manufacturing actuators since 1961 Technical Data RCEL005 RCEL006-250 RCEL series
More informationSMARTRONIC MA. Type Series Booklet
SMARRONIC MA SMARRONIC MA R131 Electro-pneumatic 4-2mA ype Series Booklet Legal information/copyright ype Series Booklet SMARRONIC MA Original operating manual KSB Aktiengesellschaft All rights reserved.
More informationecotrans Lf 01/02 Microprocessor Transmitter / Switching Device for Conductivity
Data Sheet 20.27 Page / ecotrans Lf 0/02 Microprocessor Transmitter / Switching Device for Conductivity Type 2027 Housing for DIN rail mounting (5 x 7.5 mm to EN 0 75 A.) Brief description The JUMO ecotrans
More informationElectronic Limit Switch Type
Electronic Limit Switch Type 3738-20 with optional solenoid valve for on/off rotary actuators Application Electronic limit switch for on/off applications to indicate the end position of rotary actuators.
More informationARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T Reversible pneumatic actuator
More informationElectric Actuator J3C ELECTRIC ACTUATOR. Actuators
Specialist in Ball Valves J3C ELECTRIC ACTUATOR Technical data Housing: Body and cover: anticorrosive polyamide Main external shaft: stainless steel Fastening: stainless steel Gears: steel and polyamide
More informationLimit Switch Type 3776
Mounting and Operating Instructions Limit Switch Type 3776 Fig. 1 Edition: June 2014 EB 8368 EN Contents General notes 3 Model number and device index 3 Mounting 3 Mounting to SAMSON Type 3278 Rotary Actuators
More informationSINAMICS G120. Inverter chassis units 0.37 kw to 90 kw Supplementary system components Basic Operator Panel BOP. Supplementary system components
SINAICS G120 Basic Operator Panel BOP PC inverter connection kit For controlling and commissioning an inverter directly from a PC if the appropriate software (STARTER) has been installed. This is an isolated
More informationCENTRIFLOW 3D WITH AC MOTOR >> Technical catalouge
CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalouge air comfort Centriflow 3D 2 GMEB CentriFlow 3D - Technical Catalouge Contents GENERAL Description and survey chart Application... 3 General Survey
More informationVP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control
VP, -way proportional pressure control valves > > Port size: G/... G/ > > All-digital control electronics > > Variable pressure control > > Optional: serial interface with VP-Tool Software > > Optional
More informationSonoMeter 30 Energy Meters
SonoMeter 30 Energy Meters Description The Danfoss SonoMeter 30 is a range of ultrasonic, compact energy meters intended for measuring energy consumption in heating and cooling applications for billing
More informationHydraulic Valves «DSV»
Hydraulic Valves «DSV» Edition 09 01 Hydraulic Valves «DSV» Table of contents General information Integrated electronics amplifier and controller «DSV»...1.13-75 Product over-view and/or data sheets Proportional
More information3RW Soft Starters. General data. 6/4 Siemens LV
General data Overview The advantages of the SIRIUS soft starters at a glance: Soft starting and smooth ramp-down 1) Stepless starting Reduction of peaks Avoidance of mains voltage fluctuations during starting
More informationARI-STEVI 470 / ANSI (DN25-200)
With pneumatic and electric actuators Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 - ANSI Pneumatic actuator ARI-DP 32-35 Reversible
More informationMotor Valve GS 1 series, DN 15 up to DN 150
Motor Valve 8036 GS 1 series, DN 15 up to DN 150 Motor valve for control and switching of neutral through to highly aggressive media in process engineering, chemical industries and for plant equipment.
More information