Recommended spare parts and often used accessories

Size: px
Start display at page:

Download "Recommended spare parts and often used accessories"

Transcription

1 Recommended spare parts and often used accessories Electric Actuators Rotary Actuators 2SA5 Linear Actuators 2SB5 Part-turn Actuators 2SC5 and 2SG5 for types 2 S Issue Subject to changes without notice! Y /EN

2 Recommended spare parts Suggested minimum quantity for spare parts for operating time [%] Base order No. 1) (2SY5 + part No.) part No. Short description Explosion views see attachment... 2 years / commissioning 8 years Delivery period [weeks] Spare part definition + detailed description Page Electronics Electronics unit f, g, i, k Electronics housing cover f, g, i, k PC board plugs f, g, i, k Mechanical Output shaft insert A a, b Gasket set for commissioning 10 - all depictions Gasket set, complete Signaling gear, complete a, b, c, d, e Cover for position recording a, b, c, d, e, p Hand manual a, b, c, d, e, p Handle / hand crank / hand wheel a, b, c, d, e, p Often used accessories Short description Order No. Delivery period [week] Detailed description Page COM-SIPOS PC parameterization program 2SX5100-3PC Parking socket 2SX5303-0PS Separate mounting 2SX GA Attachments f,g Electronics ECOTRON - Connections, housings, control electronics 16 (explosion views) i,k PROFITRON/HiMod - Connections, housings, control electronics 17 a Mechanical Rotary actuator - 2SA5. 1/2/3/ b - 2SA5. 5/6/7/ c Linear actuator - 2SB5. 1/2/3/ d - 2SB5. 5/ p small Part-turn actuator - 2SG e Part-turn actuator - 2SC ) Numbers printed in bold are part Nos. of the explosion views! Page 2 Y /EN

3 Electronics 2SY5001- Electronics unit Version: Notes: Definition: silver-gray coating (similar RAL7037), completely assembled, including mounting parts for mounting to the actuator's gear unit and mounting instruction. Connection openings are covered for transport/stocks. (including the parts , 034, 035, 041 and 042 that are used depending on the version). - Electronics units are function-tested and are documented with a separate serial number and order number (2SY5...-) and are specified on a neutral rating plate. A wiring diagram is included. - Current data such as the number of elapsed hours of the motor cannot be imported from the original electronics unit. Wherever applicable, maintenance intervals must be reparameterized. see below! Identical electronics unit: Determining spare parts with importing of all actuator-specific data in the EEPROM by the supplier. (Electronics unit can only be used for absolutely identical actuator versions, e.g. rotary actuators with Nm and 5-40 rpm.) Example: supplied type 2 S A C D A B 3 bold = relevant data positions A 0 B 1 C 2 G 3 B B D D E S 1) E T 1) J J B D S (small electronics unit resp. motor up to1.5 kw) T (big electronics unit resp. motor 3 or 5.5 kw) J Identical electronics unit 2 S Y C D A B 3 bold = shifted data positions Actuator-neutral electronics unit: Determining spare parts exclusively taking into account the data relevant to the version (Electronics unit largely actuator-neutral. Actuator type, torques or cut-off forces and speed, output speed or positioning time are reimported from the old unit via the serial interface using the PC parameterization program COM-SIPOS, Order No. 2SX5100-3PC02 and are placed in the replacement unit's EEPROM.) Example: supplied type 2 S C C E D G 4 bold = relevant data positions B B D D E S 1) E T 1) J J B D S (small electronics unit resp. motor up to 1.5 kw) T (big electronics unit resp. motor 3 or 5.5 kw) J Actuator-neutral electronics unit 2 S Y P S D G 4 bold = shifted data positions Note: The actuator-neutral electronics unit for modulating actuators 2S can also be used for standard actuators 2S.50! The actuator-neutral electronics unit for continuous modulating actuators 2S can also be used for modulating actuators 2S.55 and for standard actuators 2S.50! 1) electronics unit for 3 phase power supply Version small electronics unit S big electronics unit T Actuator types 2SA501., 2SA502., 2SA503., 2SA504.-.C, 2SA551., 2SA552., 2SA553., 2SA554.-.C, 2SB551., 2SB552., 2SB553., 2SB554., 2SC5... and 2SG5...; HiMod: 2SA581., 2SA582., 2SA583., 2SA584.-.C, 2SB581., 2SB582., 2SB583. and 2SB584. 2SA504.-.D, 2SA504.-.E, 2SA505., 2SA506., 2SA507., 2SA508., 2SA554.-.D, 2SA555., 2SA556., 2SA557., 2SA558., 2SB555. and 2SB556.; HiMod: 2SA584.-.D, 2SA585., 2SA586., 2SA587., 2SA588., 2SB585. and 2SB586. Y /EN Page 3

4 Order No. 2SY Electronics unit Description List price 0 for standard 2S.50 5 for modulating duty 2S.55 (actuator-neutral version can also be used for 2S.50) 8 for HiMod 2S.58 (actuator-neutral version can also be used for 2S.55 and 2S.50) *) add. cost Rotary actuators 2SA5 Linear actuators 2SB5 Part-turn actuators 2SC5 resp. 2SG5 A 1,25 10 rpm without B 2,5 20 rpm C 5 40 rpm mm/min resp sec/90 D rpm E rpm P actuator-neutral requires 0 in 11 th and 12 th place of order No. B 1x AC V without D 1x AC V J 3x AC V S 3x AC V small electronics unit (motor up to 1.5 kw) T big electronics unit (motor 3 or 5.5 kw) *) *) Rotary actuators 2SA5 Linear actuators 2SB5 Part-turn actuators 2SC5 resp. 2SG5 0 actuator-neutral resp. 2SC5.0. 2SG5.0. without 1 2SA5.1. 2SB5.1. 2SC5.1. 2SG SA5.2. 2SB5.2. 2SC5.2. 2SG SA5.3. 2SB5.3. 2SC SA5.4. 2SB5.4. 2SC SA5.5. 2SB5.5. 2SC SA5.6. 2SB5.6. 2SC SA SA actuator-neutral resp. for rotary actuator 2SA5 without 1 for linear actuator 2SB5 2 for part-turn actuator 2SC5 3 for small part-turn actuator 2SG5 3 Control electronics ECOTRON without 4 Control electronics PROFITRON/HiMod A without add-ons for electronics unit without B Relay board C PROFIBUS DP with V1 and V2 services (V2 services only with PROFITRON/HiMod) - 1-channel D PROFIBUS DP with V1 and V2 services (only with PROFITRON/HiMod) - 2-channel E MODBUS RTU - 1-channel F MODBUS RTU - 2-channel (only with PROFITRON/HiMod) G PROFIBUS DP - 1-channel, Micromaster compatible (incl. part 033) H PROFIBUS DP - 2-channel, Micromaster compatible (incl. part 033) J for HART without K for HART + relay board L for HART with parameterization A standard software-function without B Positioner for standard (only PROFITRON) for modul. duty (only PROFITRON) for HiMod without C Process controller for modul. duty (only PROFITRON) for HiMod D travel dependent output speed adjustment (only PROFITRON) E Positioner + travel dependent output speed adjustment for modul. duty (only PROFITRON) for HiMod F external analog output speed setpoint (only PROFITRON) G Positioner + external analog output speed setpoint for modul. duty (only PROFITRON) for HiMod H Positioner with proportional control / split-range functionality for modul. duty (only PROFITRON) for HiMod J travel dependent freely adjustable positioning times (only PROFITRON) K Positioner + travel dependent freely adjustable for modul. duty (only PROFITRON) positioning times for HiMod L Process controller + travel dependent freely adjustable for modul. duty (only PROFITRON) positioning times for HiMod 3 for direct connection without 4 for round plug / field bus interface resp. for electrical isolation of analog signals without *) Differentiation only necessary if the data is not read out of the EEPROM of the old unit with the PC parameterization program COM-SIPOS (Order No. 2SX5100-3PC02) via the serial interface RS 232 or Bluetooth resp. the fieldbus interface RS 485 (a change of the actuator type as also of the factory parameters is not possible via fieldbus) and is read into the replacement electronics. Actuator-neutral electronics unit: 2SY5001-.P Page 4 Y /EN

5 Additional features for electronics unit 2SY5001- (add. "-Z" to order No.) add. cost ECOTRON M 1 8 Automatic motor stop period heater S 2 1 Analog actual position value 4-20mA (only standard version) PROFITRON M 1 8 Automatic motor stop period heater without P 4 1 prepared for non-intrusive P 4 2 Control PC board prepared for non-intrusive (only in combination with S31 ) S 3 8 prepared for external COM-SIPOS interface Setting/programming K 7 0 for modulating duty with reduced cycles S4/S5 (only standard version) V 5 0 Test to IEC Y 0 5 Torque dependent cut-off in end position: without Y 1 1 Parameterization to customer requirement specify serial number! Y 3 3 Binary and analog inputs freely usable via fieldbus without Y.. project dependent parameterization: Y12, Y14, Y15, Y17, Y19, Y50, Y90 Y 9 9 Customer specific software-programming Customer plate B 0 0 with freely definable text Language for rating plate B.. Rating-plate foreign-language/english: without AR (B65), CS (B55), DA (B62), EL (B60), EN (B49), ES (B51), FI (B54), FR (B50), IT (B52), PL (B57), PT (B64), RO (B59), RU (B53), SK (B61), SV (B56), TR (B63), ZH (B58) SIPOS 5 Micromaster S 3 1 Connection electronics unit to gear unit acc. to SIPOS 5 Micromaster (delivered until 2001) P 1 5 Connection with PG-threads (only applicable for PROFIBUS connection) Other C 2 1 special plug connection with view glass, with C10 with C11 C 5 0 Bluetooth interface PROFITRON (Cover made of Macrolon) HiMod (instead of external COM-SIPOS interface!) without C 5 1 Bluetooth interface PROFITRON (Cover made of metal) HiMod (instead of external COM-SIPOS interface!) without C 6 0 Binary inputs OPEN/CLOSE for 120 V AC C 6 1 Parameterization for project Lünen with signaling output 1 via relay C 6 2 Binary inputs OPEN/CLOSE/STOP/EMERGENCY for 230 V AC (external power supply) C 6 3 Binary inputs OPEN/CLOSE for 120 V AC (internal power supply) C 6 9 Protective circuit for position feedback (V58) removed from the control board without E 2 1 Version with safety relay E 2 3 Space heater for electronics unit - India K 5 1 Protection class IP 68 for ECOTRON and PROFITRON with L38 for HiMod P 4 0 prepared for magnetic position sensor without S 6 0 Local controls without bush buttons S 6 1 Electronics housing cover small electronics unit (motor up to 1.5 kw) made of metal big electronics unit (Motor 3 or 5.5 kw) T 0 6 Temperature range -30 C to +60 C without V 2 6 Actuator closes in counter-clockwise direction V 2 8 special wiring diagram project dependent wiring diagram: without (only applicable for the customer connection) C.. D.. C10, C11, C15, C16, C17, C18, C23, C25, D00, D01, D02, D03, D04, D05 Finish paint L 3 0 unpainted L 3 2 Double thick-film paint 150 µm (instead of 80 µm) L 3 8 Very high corrosion protection, corrosivity category C5 with long protection time Y 3 5 Top coat of paint for colors other than RAL7037: specify required color! Σ List price = List price + Σ add. cost... [...] Electronics unit (Stell-E001) Y /EN Page 5

6 Order No. 2SY Description List price Electronics housing cover (silver-gray coating (similar RAL7037), complete with push buttons, operating foil, O-ring and mounting parts) 3 E D 0 1 ECOTRON small electronics unit (motor up to 1.5 kw) standard 3 M C 0 1 made of metal (S61) 3 E D 3 4 big electronics unit (motor from 3 kw) 1) standard 3 M C 3 4 made of metal (S61) 4 E D 0 1 PROFITRON small electronics unit (motor up to 1.5 kw) standard 4 M C 0 1 made of metal (S61) 4 E D 3 4 big electronics unit (motor from 3 kw) 1) standard 4 M C 3 4 made of metal (S61) 8 M C 0 1 HiMod small electronics unit (motor up to 1.5 kw) made of metal 8 M C 3 4 big electronics unit (motor from 3 kw) 1) Additional features (add. "-Z" to order No.) Push buttons S 6 0 without push buttons HiMod C 5 0 prepared for Bluetooth small electronics unit made of Macrolon big electronics unit 1) Finish paint L 3 2 Double thick-film paint 150 µm (instead of 80 µm) (only metal version) L 3 8 Very high corrosion protection, (only metal version) corrosivity category C5 with long protection time Y 3 5 Top coat of paint for colors other than RAL7037: specify required color! add. cost Σ List price = List price + Σ add. cost... [...] Padlock Protection cover for the local control station Order No.: 2SX5302-0VS00 Order No.: 2SX5302-0SD00 Electronics housing cover (Stell-E041) 1) big electronics unit Version big electronics unit (from 3 kw) Actuator type 2SA504.-.D, 2SA504.-.E, 2SA505., 2SA506., 2SA507., 2SA508., 2SA554.-.D, 2SA555., 2SA556., 2SA557., 2SA558., 2SB555. and 2SB556.; HiMod: 2SA584.-.D, 2SA585., 2SA586., 2SA587., 2SA588., 2SB585. and 2SB586. Page 6 Y /EN

7 Order No. Description List price 2SY S T 1 0 PC board plugs [...] complete set for power and control wire connections incl. markers (including the plug versions X1, X2.1, X2.2,.X3.1 and X3.2) Y /EN Page 7

8 Mechanical 2SY5216- Output shaft insert A Version: depending on the version with thrust washers, thrust needle rims, spigot ring, shaft sealing ring (includes part 217) Definition: To uniquely define the spare part, include the data positions of the actuators for which use is intended in the order number of the spare part. Example: supplied type 2 S A C E B A 3 bold = relevant data positions Output shaft insert A for F14 flange 2 S Y E A 3 0 bold = shifted data positions Order No. Description 2SY E A Output shaft insert A 1) << Enquire with stating the serial number if necessary! >> Rotary actuator 1 2SA SA SA SA SA SA ) 3) 2SA ) 2SA5.8. Flange DIN ISO 5210 DIN F F10 G0 2 F F14 G1/2 4 F16 G3 5 F25 G4 6 F30 G5 Type 2SA5.1. 2SA5.2. 2SA5.3. 2SA5.4. 2SA5.5. 2SA5.6. 2SA5.7. 2SA5.8. Shaft ISO/ F07 F10 F12 F14 F10 F12 F14 F16 F25 F30 DIN List price 0 A 5210 on request adjacent 9 H0A A 3210 on request Additional features see following page Output shaft insert A (Stell-E216) 1) Since mid 2002 modified parts are used. Enquire with stating the serial number (see name plate) if necessary! For replacements before mid 2002: 2 nd block EE instead of EA! 2) Since end 2007 modified parts are used. Enquire with stating the serial number (see name plate) if necessary! For replacements before end 2007: 2 nd block EE instead of EA! 3) Beginning 2009 modified parts will be used. Inquire with stating the serial number (see name plate) if necessary! Page 8 Y /EN

9 Additional features for Output shaft insert A 2SY5216-.E... (add. "-Z" to order No.) Acme screw thread 1) Y 1 8 for gear size 1 2) gear size 3 2) gear size 4 2) Flange F14 / G1/2 and F16 / G3 Flange F25 / G4 Flange F30 / G5 add. cost Special thread / design Y 2 1 Output shaft type A with special thread / design on request non-corroding Y 7 0 A-insert (stem nut) made of stainless steel on request Σ List price = List price + Σ add. cost... [...] Order No. Description List price 2SY D S 1 0 Gasket set (O-rings, square seals and shaft sealing rings, complete) 0 Recommended gasket set for commissioning for 2S.5-actuators (O-rings for electronics housing cover, signaling gear hood and connection cover/hood) 1 Gear size 1 2) 3 Gear size 3 2) 4 Gear size 4 2) 6 2SG5 Additional features (add. "-Z" to order No.) Kurzangabe Ambient condition T 0 9 Temperature range -20 C to +90 C for gear unit for recommended gasket set Gear size 1 1) Gear size 3 and 4 1) add. cost Σ List price = List price + Σ add. cost... [...] Gasket set (Stell-E218) 1) Add. cost for bushings with acme screw thread LH according to DIN 103, Part 2. The acme screw thread must be expressly stated, e.g. Tr 16 x 4 LH DIN ) Rotary actuators Linear actuators Part-turn actuators standard modul. duty modul. duty standard modul. duty Gear size 1 2SA SA SB SC SC SA SA SB SC SC SC SC SC SC504.- Gear size 3 2SA SA SB SC SC SA SA SB SC SC554.- Gear size 4 2SA SA SB SA SA SB SA SA SA SA5.8.- Y /EN Page 9

10 Order No. Description List price 2SY MG Signaling gear, complete 1) 2) (complete with potentiometer mounted and adjusted) contains the parts 221 and 222 used depending on the version for standard without mechanical position indicator SIPOS 5 Flash with mechanical position indicator for modul. duty without mechanical position indicator SIPOS 5 Flash with mechanical position indicator Additional features (add. "-Z" to order No.) add. cost Standard actuator in S4/S5 duty K 7 0 for modulating duty with reduced cycles S4/S5 on request > 4020 revs/stroke P 3 4 signaling gear for > 4020 revs/stroke (only 2SA5) non-contact type position transmitter P 4 0 magnetic position sensor (instead potentiometer) Ambient condition K 5 7 Accelerations up to 5 g K 5 8 Accelerations up to 2 g K 5 9 Seismic class S2A Σ List price = List price + Σ add. cost... [...] Signaling gear (Stell-E220) 1) The pressing-out tool 2SX5501-0CD02 is needed to release the contacts pins in part ) Secure screws with Loctite 222! Page 10 Y /EN

11 Order No. Description List price 2SY Cover for position recording (complete with O-ring and mounting parts) 0 M A for Flash 2SA5, for signaling gear, without mechanical position indicator 0 M D 2SB5, for signaling gear, with mechanical position indicator 0 M N 2SC5 for non-intrusive position encoder P41 6 M H for 2SG5 made of metal, silver-gray coating 8 M N for HiMod 2S.58 (similar RAL7037) Additional features (add. "-Z" to order No.) Cover made of metal K 5 1 Protection class IP 68 for Flash standard with L38 for P41 with L38 S 7 1 Signaling gear hood made of metal, for Flash standard silver-gray coating (similar RAL7037) for P41 S 7 2 Flat metal cover, for P41 for deliveries from September 2012, silver-gray coating (similar RAL7037) Ambient condition T 0 9 Temperature range -20 C to +90 C for Flash standard, cover made of metal for gear unit for HiMod 2S.58 Finish paint L 3 2 Double thick-film paint 150 µm for Flash standard (instead of 80 µm) (only metal version) for P41 L 3 4 Painting signaling gear hood for Flash standard L 3 8 Very high corrosion protection, for Flash standard corrosivity category C5 for P41 with long protection time for 2SG5 (only metal version) for HiMod 2S.58 Y 3 5 Top coat of paint for colors other than RAL7037: specify required color! add. cost without without Σ List price = List price + Σ add. cost... [...] Cover for position recording (Stell-E225) Y /EN Page 11

12 Order No. Description List price 2SY Hand manual 1) (silver-gray coating (similar RAL7037), depending on the version complete with support plate, compression spring, connecting cable, O-ring, centrifugal lock for gear size 4, handle and mounting parts) 1 H U 1 0 for Flash Hand manual gear size 1 2) with crank 60mm 3 H U 1 0 Hand manual gear size 3 2) with crank 90mm 1 H M 1 0 for HiMod Hand manual gear size 1 2) with hand wheel 3 H M 1 0 Hand manual gear size 3 2) 4 H U 1 0 for Flash and HiMod Hand manual 2SA5.5/6, 2SB5.5/6 5 H U 1 0 Hand manual 2SA5.7/8 6 H U 0 0 2SG5 Hand wheel, complete Additional features (add. "-Z" to order No.) Chain wheel drive V 0 0 for gear size 1 2) gear size 3 2) 2SG5 Hand wheel V 2 5 Hand wheel instead of hand crank Direction of rotation V 2 6 Direction of rotation Close at the hand wheel in clockwise direction V 2 7 Direction of ratation not indicated on the actuator V 2 8 Direction of rotation Close at the hand wheel/crank in counter-clockwise direction Ambient condition K 5 1 Protection class IP68 gear size 1 2) gear size 3 2) gear size 4 2) T 0 9 Temperature range -20 C to +90 C for gear unit Finish paint L 3 2 Double thick-film paint 150 µm (instead of 80 µm) L 3 8 Very high corrosion protection, corrosivity category C5 with long protection time Y 3 5 Top coat of paint for colors other than RAL7037: specify required color! add. cost Σ List price = List price + Σ add. cost... [...] Hand manual (Stell-E250) 1) The pressing-out tool 2SX5501-0CD02 is needed to release the contacts pins in part ) Rotary actuators Linear actuators Part-turn actuators standard modul. duty modul. duty standard modul. duty Gear size 1 2SA SA SB SC SC SA SA SB SC SC SC SC SC SC504.- Gear size 3 2SA SA SB SC SC SA SA SB SC SC554.- Gear size 4 2SA SA SB SA SA SB SA SA SA SA5.8.- Page 12 Y /EN

13 Order No. 2SY Description List price Handle 1) / hand crank / hand wheel (hand crank / wheel with silver-gray coating (similar RAL7037)) 1 G M 0 6 for Flash Handle gear size 1 2) and 3 2) for hand crank 1 G M 1 1 for Flash and HiMod Handle gear size 4 2) for hand wheel and handle for HiMod hand wheel gear size 1 2) and 3 2) 6 G M 0 0 2SG5 Handle for hand wheel 1 H H 0 0 for Flash Hand crank 60 mm with handle gear size 1 2) 3 H H 0 0 Hand crank 90 mm with handle gear size 3 2) 1 H M 0 0 for HiMod Hand wheel with handle gear size 1 2) 3 H M 0 0 Hand wheel with handle gear size 3 2) 4 H H 0 0 for Flash and HiMod Hand wheel with handle for 2SA5.5/6 and 2SB5.5/6 5 H H 0 0 Hand wheel with handle for 2SA5.7/8 Additional features (add. "-Z" to order No.) add. cost Hand wheel V 2 5 Hand wheel instead of hand crank on request Direction of rotation V 2 6 Direction of rotation Close at the hand wheel in clockwise direction V 2 7 Direction of ratation not indicated on the actuator V 2 8 Direction of rotation Close at the hand wheel/crank in counter-clockwise direction Finish paint L 3 2 Double thick-film paint 150 µm (instead of 80 µm) L 3 8 Very high corrosion protection, corrosivity category C5 with long protection time Y 3 5 Top coat of paint for colors other than RAL7037: specify required color! Σ List price = List price + Σ add. cost... [...] Handle / hand crank / hand wheel (Stell-E252) 1) Secure screw with Loctite 243! 2) Rotary actuators Linear actuators Part-turn actuators standard modul. duty modul. duty standard modul. duty Gear size 1 2SA SA SB SC SC SA SA SB SC SC SC SC SC SC504.- Gear size 3 2SA SA SB SC SC SA SA SB SC SC554.- Gear size 4 2SA SA SB SA SA SB SA SA SA SA5.8.- Y /EN Page 13

14 Accessories Order No. Description List price 2SX P C 0 2 COM-SIPOS PC parameterization program (for commissioning, programming, diagnosis, maintenance and visualization) [...] USB stick COM-SIPOS Scope of supply PC parameterization program User manual DE and GB/US (on USB stick) Zero-modem cable + USB adapter Order No. Description List price 2SX P S 0 1 Parking socket [...] (for direct and plug connection, grey surface coating) Scope of supply Parking socket Cover with screws Parking socket (Stell-PSD) Page 14 Y /EN

15 Accessories Order No. Description List price 2SX G A Installation kit for separate mounting (anthracite anodized, complete with mounting bracket, tubular steel stirrup and, depending on version, with O-rings, mounting parts, caps or heavy-gauge threaded joint and all parts needed for electrical connection such as covers and plugs etc.) Add. version of the original delivery Length of connecting cable S41 + R70 3 m R71 5 m R72 10 m S47 + R70 3 m R71 5 m R72 10 m Version of connection (a) (b) (a) (b) Fixed cable connection Connecting cable with connection plug hoods (electronics unit and gear unit) completely assembled. Cable ends ready for plugging in. Fixed cable connection for variable lengths Connecting cable with connection plug hood (electronics unit) and with free ends towards the gear unit, completely assembled. The cable ends to the connection plug hood on the gear unit side must be connected locally after individual cutting to length and in accordance with the included connection diagram. Cable ends ready for plugging in. Additional features (add. "-Z" to order No.) Ambient condition T 0 9 Temperature range -20 C to +90 C for gear unit Finish paint L 3 2 Silver-gray coating (similar RAL7037) L 3 8 Very high corrosion protection, corrosivity category C5 with long protection time add. cost Σ List price = List price + Σ add. cost... [...] Separate mounting, version shown 2SX5300-4GA.. Y /EN Page 15

16 Electronics unit ECOTRON (motor up to 1.5 kw) (Stell55) Electronics unit ECOTRON (motor from 3 kw) (Stell57) Page 16 Attachment f, g Y /EN

17 Electronics unit PROFITRON/HiMod (motor up to 1.5 kw) (Stell54) Electronics unit PROFITRON/HiMod (motor from 3 kw) (Stell56) Y /EN Attachment i, k Page 17

18 Gear unit 2SA5. 1/2/3/4.- (Stell93) Output shaft B1 Output shaft insert Reducing flange Output shaft A Page 18 Attachment a Y /EN

19 Gear unit 2SA5. 5/6/7/8.- (Stell94) Output shaft B1 Output shaft insert Reducing flange Output shaft A Y /EN Attachment b Page 19

20 Gear with stroke unit 2SB5. 1/2/3/4.- (Stell98) Page 20 Attachment c Y /EN

21 Gear with stroke unit 2SB5. 5/6.- (Stell89) Y /EN Attachment d Page 21

22 small part-turn gear 2SG5...- (Stell71) Page 22 Attachment p Y /EN

23 Gear with part-turn unit 2SC5...- (Stell90) Y /EN Attachment e Page 23

24 Issue SIPOS Aktorik GmbH Y /EN Subject to changes without notice! Im Erlet 2 D Altdorf

Recommended spare parts and often used accessories

Recommended spare parts and often used accessories Recommended spare parts and often used accessories Electric Actuators Rotary Actuators 2SA5 Linear Actuators 2SB5 Part-turn Actuators 2SC5 and 2SG5 for types 2 S 5 - - 3 4 Issue 07.14 Subject to changes

More information

Technical Data Part-turn gearbox 2SP78

Technical Data Part-turn gearbox 2SP78 Part-turn gearbox 2SP78 Contents Page General data Mounting position, duty classifications, noise level, paint finish and corrosion protection, lubrication, degree of protection, ambient temperature 2

More information

1 potential-free change-over contact (max. 24 V DC/1 A) for SIL collective failure signal SIL functions - safety functions Standard: Safe ESD

1 potential-free change-over contact (max. 24 V DC/1 A) for SIL collective failure signal SIL functions - safety functions Standard: Safe ESD General information AC 01.2 Actuator controls in SIL version for controlling multi-turn actuators of the SA/SAR.2 type range and part-turn actuators of the SQ/SQR.2 type range. Information on SIL features

More information

We reserve the right to alter data according to improvements made. Previous documents become invalid with the issue of this document.

We reserve the right to alter data according to improvements made. Previous documents become invalid with the issue of this document. General information Actuator controls AC 01.2 for controlling multi-turn actuators of the SA/SAR type range and part-turn actuators of the SQ/SQR.2 type range. Features and functions Power supply Standard

More information

ARCAPRO positioner. Positioner customized for specific tasks

ARCAPRO positioner. Positioner customized for specific tasks ARCAPRO ARCAPRO Positioner customized for specific tasks 2 3 1 A linear function between the input signal and stroke is the best way to ensure maximum control precision. Control valves with pneumatic actuators,

More information

Technical Data Electric double-motor-actuators

Technical Data Electric double-motor-actuators M768 Electric double-motor-actuators Contents Page General data Overview, application, design and mode of operation, mounting position Technical details General Motors Switching and signaling unit Electrical

More information

Special voltages: Voltage >500 V AC are only permissible with external control box. 3-phase AC Voltages/frequencies. 1-phase AC Voltages/frequencies

Special voltages: Voltage >500 V AC are only permissible with external control box. 3-phase AC Voltages/frequencies. 1-phase AC Voltages/frequencies General information Actuator controls AC 01.2 for controlling multi-turn actuators of the SA/SAR type range and part-turn actuators of the SQ/SQR.2 type range. Power supply Standard voltages AC: 3-phase

More information

Field IT Actuators & Positioners Rotary Actuators - Rated Torque 100 Nm (80 ft-lbs) PME 120-AI/AN. Rotary Actuators Rated Torque 100 NM (80 ft-lbs)

Field IT Actuators & Positioners Rotary Actuators - Rated Torque 100 Nm (80 ft-lbs) PME 120-AI/AN. Rotary Actuators Rated Torque 100 NM (80 ft-lbs) Data Sheet Field IT Actuators & Positioners Rotary Actuators - Rated Torque 100 Nm (80 ft-lbs) PME 120-AI/AN Electric actuator for continuous duty modulating or pulse input control. Stall proof without

More information

mass flowmeter for compressed air

mass flowmeter for compressed air mass flowmeter for compressed air VARIOMASS ECO pressure and temperature compensated easy and cost effective installation of the sensor no pressure loss caused by the sensor no moving parts, i.e. maintenance

More information

Intelligent Positioner

Intelligent Positioner Intelligent Positioner Construction The digital electro-pneumatic positioner detects the valve position with an external long life travel sensor. It possesses a solid housing with protected operating keys.

More information

CK Range. Keeping the World Flowing. Spare Parts Manual. Modular Design Electric Valve Actuators

CK Range. Keeping the World Flowing. Spare Parts Manual. Modular Design Electric Valve Actuators CK Range Spare Parts Manual Modular Design Electric Valve Actuators Note: Full details from the actuator nameplate must be given when enquiring about or ordering spare parts Spare Parts Manual for CK Range

More information

MME/MOE Intelligent Electric Actuators About Ontrac

MME/MOE Intelligent Electric Actuators About Ontrac About Ontrac 01 Specifications Voltage supply Duty mode Motor control 3-phase AC, 380/460±10%, 50/60Hz±5%; 1-phase AC, 220±10%, 50/60Hz±5%; On-off (MOE series,) a complete stroke, S2-15 min; Modulating

More information

LINEAR ELECTRIC ACTUATORS

LINEAR ELECTRIC ACTUATORS LINEAR ELECTRIC ACTUATORS Type EL EL12, EL20, EL45, EL80, EL120, EL250 DESCRIPTION Electric linear actuators EL series for modulating and openclose duty of control and process technology to operate control

More information

TQ Series represents our devoted technology over 30 years of experience in the valve actuation, offering customer the reliable, quality assured, and

TQ Series represents our devoted technology over 30 years of experience in the valve actuation, offering customer the reliable, quality assured, and 02 TQ Series represents our devoted technology over 30 years of experience in the valve actuation, offering customer the reliable, quality assured, and cost-effective product. Features Light, compact and

More information

LINEAR ELECTRIC ACTUATORS

LINEAR ELECTRIC ACTUATORS LINEAR ELECTRIC ACTUATORS Type EL EL12, EL20, EL45, EL80, EL120, EL250 DESCRIPTION Electric linear actuators EL series for modulating and openclose duty of control and process technology to operate control

More information

TopControl Continuous

TopControl Continuous 860 Electropneumatic positioner for pneumatically actuated control valves Type 860 can be combined with... Type 7 Type 70 Types 70/7/7K Type 800 Piston-controlled globe valve Piston-controlled angle seat

More information

True Fail-Safe Technology and Precision Control for Reliable Shutdown

True Fail-Safe Technology and Precision Control for Reliable Shutdown True Fail-Safe Technology and Precision Control for Reliable Shutdown RTS Series Compact Fail-Safe Electric Actuators Reliable, Accurate, Compact Electric Actuation Technology for Critical Fail-Safe and

More information

Field IT Actuators & Positioners. Intelligent Electric Modulating Actuator. Contrac RHD Intelligent Electric Modulating Actuator

Field IT Actuators & Positioners. Intelligent Electric Modulating Actuator. Contrac RHD Intelligent Electric Modulating Actuator Data Sheet Field IT Actuators & Positioners Intelligent Electric Modulating Actuator Contrac RHD 16000 Electric actuator for continuous duty modulating or pulse input control. Stall proof without the need

More information

Electric linear actuators

Electric linear actuators Electric linear actuators 06, 12/20/45, 80, 200 Electric linear actuators for modulating and openclose duty of control and process technology to operate control valves. The self-locking stem/stem nut is

More information

Mounting and operating instructions EB 5801 EN. Electric Actuators Type 5801 (Rotary Actuator) Type 5802 (Linear Actuator)

Mounting and operating instructions EB 5801 EN. Electric Actuators Type 5801 (Rotary Actuator) Type 5802 (Linear Actuator) Electric Actuators Type 5801 (Rotary Actuator) Type 5802 (Linear Actuator) Linear Actuator with Type 3260 Control Valve Rotary actuator with lever system Linear actuator with Type 3321 (V2001) Control

More information

VALVE CONTROLLERS Controllers for Dust Extr 2010 / 2011 action Technology

VALVE CONTROLLERS Controllers for Dust Extr 2010 / 2011 action Technology VALVE CONTROLLERS Controllers for Dust Extraction 2010 Technology / 2011 Valve controllers for all cases HESCH has the skills and technology to tackle any control task for dedusting of filter and dust

More information

Type Electronic Limit Switch

Type Electronic Limit Switch Type 3738-20 Electronic Limit Switch With optional solenoid valve Application Electronic limit switch for on/off applications to indicate the end position. Optionally with integrated solenoid valve. Special

More information

Solenoid Valve Island Type 3965

Solenoid Valve Island Type 3965 Solenoid Valve Island Type 365 for the control of pneumatic actuators General The Type 365 Solenoid Valve Island is a compact solution for the centralized control of pneumatic actuators in chemical and

More information

MME/MOE Intelligent Electric Actuators About Ontrac

MME/MOE Intelligent Electric Actuators About Ontrac About Ontrac 01 Specifications Voltage supply 3-phase AC, 380/460±10%, 50/60Hz±5%; 1-phase AC, 220±10%, 50/60Hz±5%; On-of V Voltage input 24V Voltage output 24V resistance; rising characteristic (2) r

More information

System Electropneumatic Converters (Proportional Valves) Electronic Process Controllers Signal Converters

System Electropneumatic Converters (Proportional Valves) Electronic Process Controllers Signal Converters System 6000 Electropneumatic Converters (Proportional Valves) Electronic Process Controllers Signal Converters Edition April 2018 Information Sheet T 6000 EN Electropneumatic Converters i/p converters

More information

FlowPak TM General Application Valve DN , PN 10 / 40

FlowPak TM General Application Valve DN , PN 10 / 40 FlowPak TM General Application Valve DN 15 -, PN / SCHERR Application Control of gases, vapours and liquids. The modular concept of valve, multi spring actuator and our standard Positioner facililates

More information

EAS822 (Contrac) Power Electronic Unit

EAS822 (Contrac) Power Electronic Unit Contents Data Sheet Rev. A EAS822 (Contrac) Power Electronic Unit For continuous control of Contrac actuators PME120 AN and LME620 AN Microprocessor-controlled power electronic unit with integrated frequency

More information

Ball Valves in cast 316 SS multi-port, bolted construction

Ball Valves in cast 316 SS multi-port, bolted construction 65 Ball Valves in cast 36 SS, bolted construction Type 65 can be combined with 800 PSI WOG Thread, socket and butt weld ends Full port to Sch 40 pipe 3/4/5 ports in L, X, T or I pattern Range of seal options

More information

Product overview linear actuators SBA

Product overview linear actuators SBA Technical data Type 06-1/-2/-3 06-4 12 20 45-2/-3 Positioning force kn 0.6 / 0.9 / 1.2 2.0 1.2 2.0 3.5 / 4.5 6.0 Positioning speed 1) mm/min 8 / 10 13.2 / 16 20 8 / 10 13.2 25 15 17 / 25 50 17 34 Power

More information

2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25

2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25 2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25 Type 2103 can be combined with Hermetical separation of fl uids from the operating mechanism by diaphragm Zero

More information

SMARTRONIC AS-i. Type Series Booklet

SMARTRONIC AS-i. Type Series Booklet SMARTRONIC AS-i SMARTRONIC AS-i R1313 Type Series Booklet Legal information/copyright Type Series Booklet SMARTRONIC AS-i KSB Aktiengesellschaft All rights reserved. Contents provided herein must neither

More information

T 3965 EN Type 3965 Solenoid Valve Island To control pneumatic actuators

T 3965 EN Type 3965 Solenoid Valve Island To control pneumatic actuators T 365 EN Type 365 Solenoid Valve Island To control pneumatic actuators Application The Type 365 Solenoid Valve Island is a compact solution for the central control of pneumatic actuators in chemical and

More information

ELECTRIC MULTI-TURN ACTUATORS for valve automation in the oil & gas industry with high torque requirements

ELECTRIC MULTI-TURN ACTUATORS for valve automation in the oil & gas industry with high torque requirements ELECTRIC MULTI-TURN ACTUATORS for valve automation in the oil & gas industry with high torque requirements TECHNICAL DOCUMENTATION 2016 SAEx 25.1 SAEx 40.1 SAREx 25.1 SAREx 30.1 AMExC 01.1 ACExC 01.2 Manual

More information

Operating Instructions. Angle Seat Control Valve. Type 7020

Operating Instructions. Angle Seat Control Valve. Type 7020 Operating Instructions Angle Seat Control Valve Type 7020 With: Digital Positioner Type 8048 Electro-pneumatic Positioner Type 8047 Pneumatic Positioner Type 8047 Version: 02/2006 Manual-7020e.doc Art.-No:

More information

Positioners Converters Limit Switches Position Transmitters Solenoid Valves Accessories. Selection and Application

Positioners Converters Limit Switches Position Transmitters Solenoid Valves Accessories. Selection and Application Positioners Converters Limit Switches Position Transmitters Solenoid Valves Accessories Selection and Application Associated s T 8355 EN ff. Edition January 2010 Information Sheet T 8350 EN Positioners,

More information

2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65

2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65 2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65 Excellent combination of good control characteristic and high fl ow rates High cycle life Clean design for optimal

More information

ADCA VALSTEAM ADCA. LINEAR ELECTRIC ACTUATORS Type EL EL12, EL20, EL45, EL80, EL120, EL250 DESCRIPTION

ADCA VALSTEAM ADCA. LINEAR ELECTRIC ACTUATORS Type EL EL12, EL20, EL45, EL80, EL120, EL250 DESCRIPTION LINEAR ELECTRIC ACTUATORS Type EL EL12, EL20, EL45, EL80, EL120, EL250 DESCRIPTION Electric linear actuators EL series for modulating and openclose duty of control and process technology to operate control

More information

True Fail-Safe Technology and Precision Control Meet Emergency Shutdown and Demanding Process Applications

True Fail-Safe Technology and Precision Control Meet Emergency Shutdown and Demanding Process Applications True Fail-Safe Technology and Precision Control Meet Emergency Shutdown and Demanding Process Applications RTS Series Compact Fail-Safe Electric Actuators Reliable, Accurate, Compact Electric Actuation

More information

Series 7000 Torque Sensor for PTO-shafts

Series 7000 Torque Sensor for PTO-shafts Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Special for PTO shafts 1 ¾ und 1 3/8 Plug & Play solution, no additional

More information

Electronic Limit Switch Type

Electronic Limit Switch Type Electronic Limit Switch Type 3738-20 with optional solenoid valve for on/off rotary actuators Application Electronic limit switch for on/off applications to indicate the end position of rotary actuators.

More information

High performance Vector Control. Ratings. System configuration

High performance Vector Control. Ratings. System configuration System configuration High performance Vector Control Low harmonic or regenerative drive IP54 full range Compact design and robustness Built-in filter (according to C3 class) Built-in fuses (from 200 kw)

More information

Differential pressure transmitter PASCAL Ci4 Delta P

Differential pressure transmitter PASCAL Ci4 Delta P Differential pressure transmitter PASCAL Ci4 Delta P for general application, Type Series CI4300 Features Differential pressure transmitter with metallic diaphragm High-resolution graphic display with

More information

Flow VA 550 / 570. DVGW tested. Flow.

Flow VA 550 / 570. DVGW tested. Flow. VA 550 / 570 DVGW tested Flow www.cs-instruments.com 67 VA 550 compressed air and gases Application range: Ideal also for the outdoor area Compressed air measurement and distribution Leakage measurement

More information

Q Range Watertight Single-Phase Electric Quarter-turn Actuators for part-turn valves and dampers

Q Range Watertight Single-Phase Electric Quarter-turn Actuators for part-turn valves and dampers This brochure provides a comprehensive overview of the applications and associated functions available with Rotork Q actuators - comprising Q Standard and Q Pak actuators. The watertight Q Range actuators

More information

Ball Valve C 110. PVC-U PP PVDF - wafer flange socket end DIN-flange. Ball. Advantages. Ball seat. Application. Sealings. Utilisation.

Ball Valve C 110. PVC-U PP PVDF - wafer flange socket end DIN-flange. Ball. Advantages. Ball seat. Application. Sealings. Utilisation. ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Ball Valve C 110 PVC-U PP PVDF - wafer flange

More information

SITRANS T measuring instruments for temperature

SITRANS T measuring instruments for temperature for installation in pipelines and tanks Overview The resistance thermometer is designed for installation in tanks and pipelines as well as for the measurement of temperature with hygiene requirements.

More information

TECHNICAL INSTRUCTIONS SINGLE ACTING POSITIONING RELAY

TECHNICAL INSTRUCTIONS SINGLE ACTING POSITIONING RELAY Form TI47-POS A Watts Industries Co. TECHNICAL INSTRUCTIONS SINGLE ACTING POSITIONING RELAY 47-3000 FEATURES Compact design can be installed in any position Low maintenance epoxy coated aluminum manifold

More information

Pressure transmitter PASCAL CV4

Pressure transmitter PASCAL CV4 Pressure transmitter PASCAL CV4 with threaded connection, Type series CV4100 Features Application area Pharmaceutical industry Food industry Biotechnology General process technology Compact case of stainless

More information

Series 7000 Torque Sensor for PTO-shafts

Series 7000 Torque Sensor for PTO-shafts Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Special for PTO shafts 1 ¾ und 1 3/8 Plug & Play solution, no additional

More information

MODULATING SERVICE ELECTRIC ACTUATORS OPERATION AND MAINTENANCE MANUAL COMMERCIAL AND INDUSTRIAL VALVES AND AUTOMATION

MODULATING SERVICE ELECTRIC ACTUATORS OPERATION AND MAINTENANCE MANUAL COMMERCIAL AND INDUSTRIAL VALVES AND AUTOMATION SERIES 000/S-X MODULATING SERVICE ELECTRIC ACTUATORS OPERATION AND MAINTENANCE MANUAL COMMERCIAL AND INDUSTRIAL VALVES AND AUTOMATION Publication S000X- VER045- For information on this product and other

More information

2/2-way Globe Control Valve, threaded port connection, DN 10-65

2/2-way Globe Control Valve, threaded port connection, DN 10-65 2/2-way Globe Control Valve, threaded port connection, DN 10-65 Type 2712 can be combined with... Classic design with interchangeable trims, 3 to 5 Kvs-value per connection port Excellent control characteristic

More information

TOP-QUALITY PNEUMATIC ACTUATOR

TOP-QUALITY PNEUMATIC ACTUATOR TOP-QUALITY PNEUMATIC ACTUATOR BS EN ISO 9001:2000 INTRODUCTION PDS series Pneumatic Actuators are designed using Scotch-Yoke technology from PDS 50 to the largest of PDS 200. Scotch-Yoke technology is

More information

Operating Instructions. Pneumatic Control Valve Low Temperature. Type Series GS3

Operating Instructions. Pneumatic Control Valve Low Temperature. Type Series GS3 Operating Instructions Pneumatic Control Valve Low Temperature Type 8026 Series GS3 With: Digital Positioner Type 8048 Electro-pneumatic Positioner Type 8047 Pneumatic Positioner Type 8047 Version: 03/2006

More information

TZIM. Electropneumatic Analog Positioner 10/ EN

TZIM. Electropneumatic Analog Positioner 10/ EN TZIM Electropneumatic Analog Positioner EP001XA.tif Q Convenient, simple design Q Easy to handle Q User-friendly operation, easy to understand Q Reliable concept, I/P conversion through the 500,000 times

More information

Remote Process Actuation Control System AirLINE - Siemens ET 200S

Remote Process Actuation Control System AirLINE - Siemens ET 200S Remote Process Actuation Control System AirLINE - Siemens ET 200S Type 8644 can be combined with... Fully compatible with Siemens ET 200S Combination of Fieldbus, pilot valves and I/O modules High flexibility

More information

1/4 turn ACTELEC SG05.1 to SG12.1 (AUMA)

1/4 turn ACTELEC SG05.1 to SG12.1 (AUMA) Type series booklet 8521.14/3--10 1/4 turn ACTELEC SG05.1 to SG12.1 Direct 1/4 turn electric actuators ACTELEC AUMA SG05.1 - SG07.1 - SG10.1 - SG12.1 Output torques up to 1200 Nm Applications All sectors

More information

JUMO dtrans p20. Process pressure transmitter. Type Brief description. Key features. Block diagram

JUMO dtrans p20. Process pressure transmitter. Type Brief description. Key features. Block diagram Data Sheet 403025 Page 1/10 JUMO dtrans p20 Process pressure transmitter Brief description The JUMO dtrans p20 pressure transmitter with HART interface combines maximum precision with easy operation. It

More information

F01 Electric Actuators

F01 Electric Actuators Light weight, compact, intelligent electric quarter turn actuator with torques ranging from 150 to 600 Nm and speeds from 5 to 60 seconds FEATURES Constant torque controlled in both directions Cut metal

More information

2/2 way Globe Control Valve, threaded connection, 3/8" 3"

2/2 way Globe Control Valve, threaded connection, 3/8 3 2/2 way Globe Control Valve, threaded connection, 3/8" 3" Complete Burkert system using Type 2712 with TopControl 8630 New generation with interchangeable trims, 3 to 5 Cvs value per connection port Excellent

More information

Superstatic 440. Static Heat Meter, Static Cooling Meter. Application

Superstatic 440. Static Heat Meter, Static Cooling Meter. Application Superstatic 440 Static Heat Meter, Static Cooling Meter Application Design The Superstatic 440 is a static heat or cooling meter according to standard EN1434 class 2 based on the fluid oscillation principle,

More information

SMARTRONIC MA. Type Series Booklet

SMARTRONIC MA. Type Series Booklet SMARRONIC MA SMARRONIC MA R131 Electro-pneumatic 4-2mA ype Series Booklet Legal information/copyright ype Series Booklet SMARRONIC MA Original operating manual KSB Aktiengesellschaft All rights reserved.

More information

SRD998 Intelligent Positioner (Version HART Basic Diagnostic)

SRD998 Intelligent Positioner (Version HART Basic Diagnostic) Quick Guide 07.2016 QG EVE0108 A-(en) SRD998 Intelligent Positioner (Version HART Basic Diagnostic) These instructions are to be used as a guide for quick start-up. For more detailed information please

More information

Sentronic PLUS 614 Series

Sentronic PLUS 614 Series Sentronic PLUS 64 Series Proportional Technology www.asco.com PRESSURE CONTROL: 64 SERIES SENTRONIC PLUS Sentronic PLUS Sentronic PLUS is a digitally operated pressure regulator valve. This valve accurately

More information

2/2-way Globe Control Valve with stainless steel design for media up to +185ºC, DN

2/2-way Globe Control Valve with stainless steel design for media up to +185ºC, DN 2/2-way Globe Control Valve with stainless steel design for media up to +185ºC, DN 10-100 Type 2301 flange can be combined with Excellent control characteristics High cycle life Flow optimised body in

More information

4.3 MSK SWITCH BOX MSK (SIZE I) FEATURES ADVANTAGES

4.3 MSK SWITCH BOX MSK (SIZE I) FEATURES ADVANTAGES SWITCH BOX MSK (SIZE I) FEATURES - A compact, robust switch box to be mounted on pneumatic actuators - Position response via integrated micro limit switches - Integrated terminal Strip - The micro limit

More information

Proportional directional valves type DPZO-A* two stage without position transducer, ISO 4401 sizes 10, 16 and 25

Proportional directional valves type DPZO-A* two stage without position transducer, ISO 4401 sizes 10, 16 and 25 wwwatoscom Table F70-9/E Proportional directional valves type DPZO-* two stage out position transducer, ISO 0 sizes 0, 6 and 5 Communication plastic connector, see section 5 DPZO-E-5 DPZO-ES-PS-7 (dotted

More information

Superstatic 440. Static Heat- and Cooling Meter. Application

Superstatic 440. Static Heat- and Cooling Meter. Application Superstatic 440 Static Heat- and Cooling Meter Application Design The Superstatic 440 is a static heat- and cooling meter according to standard EN1434 class 2 based on the fluid oscillation principle,

More information

SMART VALVE POSITIONER 4 to 20 ma + HART Digital Communication. smar

SMART VALVE POSITIONER 4 to 20 ma + HART Digital Communication. smar SMART VALVE POSITIONER to ma + HART Digital Communication smar DESCRIPTION The FY microprocessor based positioner provides fast and accurate positioning of diaphragm or cylinder actuators. The FY produces

More information

Double acting pneumatic actuators. ACTAIR 1.5, 3, 6, 12, 25 and 50: rack and pinion kinematics. ACTAIR 100 and 200: scotch -yoke kinematics

Double acting pneumatic actuators. ACTAIR 1.5, 3, 6, 12, 25 and 50: rack and pinion kinematics. ACTAIR 100 and 200: scotch -yoke kinematics Technical leaflet 8515.1/3--10 ACTAIR 1.5 to 800 Double acting ACTAIR 1.5, 3, 6, 12, 25 and 50: rack and pinion kinematics ACTAIR 100 and 200: scotch -yoke kinematics ACTAIR 400 and 800: yoke AMRI patented

More information

MICRO MASTER MICRO MASTER Vector MIDI MASTER Vector

MICRO MASTER MICRO MASTER Vector MIDI MASTER Vector Standard Drives 1 W to kw VECTOR CONTROL SENSORLESS , and : The facts about the favourites Worldwide voltage ranges for a global product 1/3 phase 8-2 V AC % 3 phase 0-0 V AC % 3 phase 0-5 V AC % Greater

More information

ELECTRIC MULTI-TURN ACTUATORS for the automation of industrial and special valves with torque requirements up to 120,000 Nm

ELECTRIC MULTI-TURN ACTUATORS for the automation of industrial and special valves with torque requirements up to 120,000 Nm ELECTRIC MULTI-TURN ACTUATORS for the automation of industrial and special valves with torque requirements up to 120,000 Nm Offering the perfect actuator automating any valve this is the milestone defined

More information

AKM 105S, 115S: Rotary actuator with SAUTER Universal Technology (SUT) for ball valve

AKM 105S, 115S: Rotary actuator with SAUTER Universal Technology (SUT) for ball valve Product data sheet 5.1 51.364 AKM 105S, 115S: Rotary actuator with SAUTER Universal Technology (SUT) for ball valve How energy efficiency is improved Automatic adaptation to ball valve, precise activation

More information

Technical specification

Technical specification 15. Nov. 2010 Page 1 (5) Metso Rotating Sensor part - Rotating shear force based transmitter for pulp consistency measurement in pulp and paper industry. - Sensing element selection based on pulp type

More information

Low voltage AC drives

Low voltage AC drives General machinery drives Main features and dimensions Unique features Fast and extensive I/O PID control Application macros Many installation possibilities 200 to 480 V, 1-phase or 3-phase More value for

More information

RSDE10 / RSDE20 (Contrac) Electrical Linear Actuator

RSDE10 / RSDE20 (Contrac) Electrical Linear Actuator Contents Data Sheet Rev. A RSDE10 / RSDE20 (Contrac) Electrical Linear Actuator For continuous positioning, In explosion-proof design, Rated force 10 kn / 20 kn (2200 lbf / 4400 lbf) Electrical actuator

More information

AS-I

AS-I Digital Positioner 8049 Compact digital positioner for pneumatic control valves. Positioner can be integrated into valve actuator (no external moving parts for stroke feedback) Wide range of strokes 3-8

More information

ELECTRIC ACTUATORS. for industrial applications and civil vessels ELEKTRISCHE STELLANTRIEBE

ELECTRIC ACTUATORS. for industrial applications and civil vessels ELEKTRISCHE STELLANTRIEBE ELEKTRISCHE STELLANTRIEBE ELECTRIC ACTUATORS for industrial applications and civil vessels TECHNISCHE UNTERLAGEN 2017 TECHNICAL DOCUMENTATIONS 2017 BASIC RANGE SBA 06 SBA 200 NR 2.1 NR 2.3 ED 25 ED 450

More information

Differential pressure transmitter PASCAL Ci4 Delta P

Differential pressure transmitter PASCAL Ci4 Delta P Differential pressure transmitter PASCAL Ci4 Delta P for diaphragm seal operation, Type series CI4330 Features Application area General process engineering Chemical and petrochemical industry General process

More information

VP23 3-way proportional pressure control valve Directly-controlled seat valve with µp-driven pressure control G 1/4... G 3/4

VP23 3-way proportional pressure control valve Directly-controlled seat valve with µp-driven pressure control G 1/4... G 3/4 -way proportional pressure control valve Directly-controlled seat valve with µp-driven pressure control G /... G / All-digital control electronics Variable pressure control Optional: serial interface with

More information

Angle Seated Valves. ecoflo-as. Angle Seated Valves

Angle Seated Valves. ecoflo-as. Angle Seated Valves Angle Seated Valves ecofloas Angle Seated Valves AngleSeat Valves PNEUMATIC AND ELECTRIC VALVES PN / PN / PN / ANSI 0 / ANSI 00 series pneumatic and electric valves are designed as onoff or reglation valves

More information

* _0916* Drive Technology \ Drive Automation \ System Integration \ Services. Revision. Synchronous Linear Motors SL2

* _0916* Drive Technology \ Drive Automation \ System Integration \ Services. Revision. Synchronous Linear Motors SL2 Drive Technology \ Drive Automation \ System Integration \ Services *23059311_0916* Revision Synchronous Linear Motors SL2 Edition 09/2016 23059311/EN SEW-EURODRIVE Driving the world Table of contents

More information

1/4 turn electric actuators (irreversible reducer with multi -turn electric actuator AUMA generation.2)

1/4 turn electric actuators (irreversible reducer with multi -turn electric actuator AUMA generation.2) Type series booklet 8521.13/5--10 ACTELEC 31 to 1600 (AUMA) 1/4 turn electric actuators (irreversible reducer with multi -turn electric actuator AUMA generation.2) ACTELEC 31: screw -nut kinematics ACTELEC

More information

Differential Pressure and Flow meters Accessories for the Media Series

Differential Pressure and Flow meters Accessories for the Media Series Differential Pressure and Flow meters Accessories for the Media Series 7 8 9 10 11 6 12 Media 5 Media 6 Media 05 1 5 2 4 Media 4 3 Selection and application These accessories upgrade the devices of the

More information

ROBICON W120 enclosed drive

ROBICON W120 enclosed drive SINAMICS Drives ROBICON W120 enclosed drive 1 HP to 200 HP Introduction This technical data sheet provides a short overview of the most important characteristics of the ROBICON W120 enclosed standard 6-pulse

More information

Limit Switch Type 3776

Limit Switch Type 3776 Mounting and Operating Instructions Limit Switch Type 3776 Fig. 1 Edition: June 2014 EB 8368 EN Contents General notes 3 Model number and device index 3 Mounting 3 Mounting to SAMSON Type 3278 Rotary Actuators

More information

Issue Abbreviated MSP numbering system AUMA MATIC Types AM. Uncontrolled copy! EWH-25 GB-10. Quality Management System AUMA-Group

Issue Abbreviated MSP numbering system AUMA MATIC Types AM. Uncontrolled copy! EWH-25 GB-10. Quality Management System AUMA-Group Issue 2004-08-04 Abbreviated MSP numbering system Types AM Only for internal use EWH-25 GB-10 Distributor: Distributor to subsidiaries representatives according to separate list Uncontrolled copy! Issue

More information

OPEN/CLOSE SERVICE ELECTRIC ACTUATORS OPERATION AND MAINTENANCE MANUAL COMMERCIAL AND INDUSTRIAL VALVES AND AUTOMATION

OPEN/CLOSE SERVICE ELECTRIC ACTUATORS OPERATION AND MAINTENANCE MANUAL COMMERCIAL AND INDUSTRIAL VALVES AND AUTOMATION SERIES 1000-X OPEN/CLOSE SERVICE ELECTRIC ACTUATORS OPERATION AND MAINTENANCE MANUAL COMMERCIAL AND INDUSTRIAL VALVES AND AUTOMATION Publication S1000X-110 VER0215-1 For information on this product and

More information

2.3. Adjustable Frequency Drives. Contents. Standards and Certifications

2.3. Adjustable Frequency Drives. Contents. Standards and Certifications Contents Selection................ Product Selection....................... Accessories........................... Technical Data and Specifications.......... Dimensions........................... Page

More information

Proportional relief valves

Proportional relief valves www.atos.com Table FS007-1/E Proportional relief valves digital, direct operated, open loop Valve body Proportional solenoid Spring Poppet Integral electronics US connector Fieldbus connector Main connector

More information

Flow Controller, flow control system for gases

Flow Controller, flow control system for gases Flow Controller, flow control system for gases Highly cost effective solution, thanks to the integrated system Reliable, robust system Automatic process tune Simple to operate Type 8750 can be combined

More information

Proportional reducing valves

Proportional reducing valves www.atos.com Table FS015-0/E Proportional reducing valves digital, direct operated, open loop Valve body Proportional solenoid Spool Integral electronics Main connector Fieldbus connector US connector

More information

Motor Valve GS 1 series, DN 15 up to DN 150

Motor Valve GS 1 series, DN 15 up to DN 150 Motor Valve 8036 GS 1 series, DN 15 up to DN 150 Motor valve for control and switching of neutral through to highly aggressive media in process engineering, chemical industries and for plant equipment.

More information

Electrical Linear Actuator RSD10 / RSD20 (Contrac)

Electrical Linear Actuator RSD10 / RSD20 (Contrac) Contents Data Sheet Electrical Linear Actuator RSD10 / RSD20 (Contrac) For continuous positioning, Rated force 10 kn / 20 kn (2250 lbf / 4500 lbf) Electrical actuator for continuous positioning or step

More information

Actuated Valves. Product Information

Actuated Valves. Product Information Actuated Valves Product Information HQ4 & HQ6 HQ Electric Actuator for Albion Ball & Butterfly Valves Small, light and compact design High Output torque Alloy Gearing Multi Voltage Options Standard Specification

More information

Hydraulic Valves «DSV»

Hydraulic Valves «DSV» Hydraulic Valves «DSV» Edition 09 01 Hydraulic Valves «DSV» Table of contents General information Integrated electronics amplifier and controller «DSV»...1.13-75 Product over-view and/or data sheets Proportional

More information

VP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control

VP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control VP, -way proportional pressure control valves > > Port size: G/... G/ > > All-digital control electronics > > Variable pressure control > > Optional: serial interface with VP-Tool Software > > Optional

More information

Quarter turn actuators Index

Quarter turn actuators Index Index General information page Introduction 227 Product information Pneumatic actuators page Double acting and spring return 228 page Index 231 ECON Compact 232 EL-series 234 ELQ-series 236 Hydraulic actuators

More information

INVEOR "Smart connections." on five levels

INVEOR Smart connections. on five levels INVEOR "Smart connections." on five levels 1 The Inveor 3 Operation and observation IP65 protection class Integrated soft PLC Pre-fitted cable glands Fan-free design up to 7.5 kw Robust and vibration-resistant

More information

PROPORTIONAL VALVES Sentronic D - G 1/8 to G 3/8 tapped body or G 1/8 - G 1/4 subbase mounted body with digital pressure control

PROPORTIONAL VALVES Sentronic D - G 1/8 to G 3/8 tapped body or G 1/8 - G 1/4 subbase mounted body with digital pressure control PROPORTIONAL VALVES Sentronic D - G 1/8 to G 3/8 tapped body or G 1/8 - G 1/4 subbase mounted body with digital pressure control 3 ports Series 608 609 FEATURES Sentronic D is a highly dynamical 3-way

More information

Product features & Overview. KA Linear actuators

Product features & Overview. KA Linear actuators Product features & Overview Linear actuators 66 Linear actuators Linear actuator Product features Wide range of force outputs Solid metal housing Large stroke range Maintenance-free gearbox Wide range

More information